target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -640,6 +640,84 @@ static struct board_info __initdata boar
   4                 },
   5         },
   6  };
   7 +
   8 +static struct sprom_fixup __initdata spw500v_fixups[] = {
   9 +       { .offset = 46, .value = 0x3046 },
  10 +       { .offset = 47, .value = 0x15a7 },
  11 +       { .offset = 48, .value = 0xfa89 },
  12 +       { .offset = 49, .value = 0xfe79 },
  13 +       { .offset = 57, .value = 0x6a49 },
  14 +};
  15 +
  16 +static struct board_info __initdata board_spw500v = {
  17 +       .name                           = "SPW500V",
  18 +       .expected_cpu_id                = 0x6348,
  19 +
  20 +       .has_uart0                      = 1,
  21 +       .has_enet0                      = 1,
  22 +       .has_pci                        = 1,
  23 +       .use_fallback_sprom             = 1,
  24 +
  25 +       .enet0 = {
  26 +               .has_phy                = 1,
  27 +               .use_internal_phy       = 1,
  28 +       },
  29 +
  30 +       .has_dsp                        = 1,
  31 +       .dsp = {
  32 +               .gpio_rst               = 6,
  33 +               .gpio_int               = 34,
  34 +               .ext_irq                = 2,
  35 +               .cs                     = 2,
  36 +       },
  37 +
  38 +       .leds = {
  39 +               {
  40 +                       .name           = "SPW500V:red:power",
  41 +                       .gpio           = 1,
  42 +                       .active_low     = 1,
  43 +               },
  44 +               {
  45 +                       .name           = "SPW500V:green:power",
  46 +                       .gpio           = 0,
  47 +                       .active_low     = 1,
  48 +                       .default_trigger = "default-on",
  49 +               },
  50 +               {
  51 +                       .name           = "SPW500V:green:ppp",
  52 +                       .gpio           = 3,
  53 +                       .active_low     = 1,
  54 +               },
  55 +               {       .name           = "SPW500V:green:pstn",
  56 +                       .gpio           = 28,
  57 +                       .active_low     = 1,
  58 +               },
  59 +               {
  60 +                       .name           = "SPW500V:green:voip",
  61 +                       .gpio           = 32,
  62 +                       .active_low     = 1,
  63 +               },
  64 +       },
  65 +
  66 +       .buttons = {
  67 +               {
  68 +                       .desc           = "reset",
  69 +                       .gpio           = 33,
  70 +                       .active_low     = 1,
  71 +                       .type           = EV_KEY,
  72 +                       .code           = KEY_RESTART,
  73 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  74 +               },
  75 +       },
  76 +
  77 +       .fallback_sprom = {
  78 +               .type                   = SPROM_BCM4318,
  79 +               .pci_bus                = 0,
  80 +               .pci_dev                = 1,
  81 +               .board_fixups           = spw500v_fixups,
  82 +               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
  83 +       },
  84 +};
  85  #endif /* CONFIG_BCM63XX_CPU_6348 */
  86
  87  /*
  88 @@ -1232,6 +1310,7 @@ static const struct board_info __initcon
  89         &board_96348gw_a,
  90         &board_rta1025w_16,
  91         &board_96348_D4PW,
  92 +       &board_spw500v,
  93  #endif
  94
  95  #ifdef CONFIG_BCM63XX_CPU_6358
  96 @@ -1268,6 +1347,7 @@ static struct of_device_id const bcm963x
  97         { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
  98         { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
  99         { .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
 100 +       { .compatible = "t-com,spw500v", .data = &board_spw500v, },
 101  #endif
 102  #ifdef CONFIG_BCM63XX_CPU_6358
 103         { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },