target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "VGV7510KW22 - o2 Box 6431";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_green;
  16
  17                 led-dsl = &dsl;
  18                 led-internet = &internet_green;
  19                 led-wifi = &wifi;
  20         };
  21
  22         sram@1F000000 {
  23                 vmmc@107000 {
  24                         status = "okay";
  25                         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  26                                          &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  27                                          &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  28                 };
  29         };
  30
  31         memory@0 {
  32                 reg = <0x0 0x4000000>;
  33         };
  34
  35         fpi@10000000 {
  36                 localbus@0 {
  37                         nor-boot@0 {
  38                                 compatible = "lantiq,nor";
  39                                 bank-width = <2>;
  40                                 reg = <0 0x0 0x1000000>;
  41                                 #address-cells = <1>;
  42                                 #size-cells = <1>;
  43
  44                                 partitions {
  45                                         compatible = "fixed-partitions";
  46                                         #address-cells = <1>;
  47                                         #size-cells = <1>;
  48
  49                                         boardconfig: partition@fe0000 {
  50                                                 label = "board_config";
  51                                                 reg = <0xfe0000 0x20000>;
  52                                                 read-only;
  53                                         };
  54                                 };
  55                         };
  56                 };
  57
  58                 gpio: pinmux@E100B10 {
  59                         pinctrl-names = "default";
  60                         pinctrl-0 = <&state_default>;
  61
  62                         state_default: pinmux {
  63                                 gphy-leds {
  64                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  65                                                         "gphy1 led0", "gphy1 led1";
  66                                         lantiq,function = "gphy";
  67                                         lantiq,open-drain = <0>;
  68                                         lantiq,pull = <2>;
  69                                         lantiq,output = <1>;
  70                                 };
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 pci-rst {
  76                                         lantiq,pins = "io21";
  77                                         lantiq,open-drain = <0>;
  78                                         lantiq,pull = <0>;
  79                                         lantiq,output = <1>;
  80                                 };
  81                         };
  82                 };
  83
  84                 ifxhcd@E101000 {
  85                         status = "okay";
  86                         gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
  87                 };
  88
  89                 pcie@d900000 {
  90                         status = "disabled";
  91                 };
  92         };
  93
  94         gphy-xrx200 {
  95                 compatible = "lantiq,phy-xrx200";
  96                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  97                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
  98                 phys = [ 00 01 ];
  99         };
 100
 101         gpio-keys-polled {
 102                 compatible = "gpio-keys-polled";
 103                 #address-cells = <1>;
 104                 #size-cells = <0>;
 105                 poll-interval = <100>;
 106
 107                 reset {
 108                         label = "reset";
 109                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_RESTART>;
 111                 };
 112
 113                 wps {
 114                         label = "wps";
 115                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 116                         linux,code = <KEY_WPS_BUTTON>;
 117                 };
 118         };
 119
 120         gpio-leds {
 121                 compatible = "gpio-leds";
 122
 123                 dsl: dsl {
 124                         label = "vgv7510kw22:green:dsl";
 125                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 126                 };
 127
 128                 internet_red {
 129                         label = "vgv7510kw22:red:internet";
 130                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 131                 };
 132
 133                 info_red {
 134                         label = "vgv7510kw22:red:info";
 135                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 136                 };
 137
 138                 power_green: power {
 139                         label = "vgv7510kw22:green:power";
 140                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 141                         default-state = "keep";
 142                 };
 143
 144                 info_green {
 145                         label = "vgv7510kw22:green:info";
 146                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 147                 };
 148
 149                 internet_green: internet_green {
 150                         label = "vgv7510kw22:green:internet";
 151                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 152                 };
 153
 154                 wifi: wifi {
 155                         label = "vgv7510kw22:green:wlan";
 156                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 157                 };
 158
 159                 power_red: power2 {
 160                         label = "vgv7510kw22:red:power";
 161                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 162                 };
 163
 164                 phone {
 165                         label = "vgv7510kw22:green:telefon";
 166                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 167                 };
 168         };
 169 };
 170
 171 &pci0 {
 172         status = "okay";
 173         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 174
 175         wifi@1814,3592 {
 176                 compatible = "pci1814,3592";
 177                 reg = <0x7000 0 0 0 0>;
 178                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 179                 ralink,mtd-eeprom-swap;
 180                 mtd-mac-address = <&boardconfig 0x16>;
 181                 mtd-mac-address-increment = <1>;
 182         };
 183 };
 184
 185 &eth0 {
 186         lan: interface@0 {
 187                 compatible = "lantiq,xrx200-pdi";
 188                 #address-cells = <1>;
 189                 #size-cells = <0>;
 190                 reg = <0>;
 191                 mtd-mac-address = <&boardconfig 0x16>;
 192                 lantiq,switch;
 193
 194                 ethernet@2 {
 195                         compatible = "lantiq,xrx200-pdi-port";
 196                         reg = <2>;
 197                         phy-mode = "mii";
 198                         phy-handle = <&phy11>;
 199                 };
 200                 ethernet@3 {
 201                         compatible = "lantiq,xrx200-pdi-port";
 202                         reg = <3>;
 203                         phy-mode = "mii";
 204                         phy-handle = <&phy12>;
 205                 };
 206                 ethernet@4 {
 207                         compatible = "lantiq,xrx200-pdi-port";
 208                         reg = <4>;
 209                         phy-mode = "mii";
 210                         phy-handle = <&phy13>;
 211                 };
 212                 ethernet@5 {
 213                         compatible = "lantiq,xrx200-pdi-port";
 214                         reg = <5>;
 215                         phy-mode = "mii";
 216                         phy-handle = <&phy14>;
 217                 };
 218         };
 219
 220         wan: interface@1 {
 221                 compatible = "lantiq,xrx200-pdi";
 222                 #address-cells = <1>;
 223                 #size-cells = <0>;
 224                 reg = <1>;
 225                 mtd-mac-address = <&boardconfig 0x16>;
 226                 mtd-mac-address-increment = <3>;
 227                 lantiq,wan;
 228
 229                 ethernet@0 {
 230                         compatible = "lantiq,xrx200-pdi-port";
 231                         reg = <0>;
 232                         phy-mode = "mii";
 233                         phy-handle = <&phy1>;
 234                 };
 235         };
 236
 237         mdio@0 {
 238                 #address-cells = <1>;
 239                 #size-cells = <0>;
 240                 compatible = "lantiq,xrx200-mdio";
 241
 242                 phy1: ethernet-phy@1 {
 243                         reg = <0x1>;
 244                         compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
 245                 };
 246
 247                 phy11: ethernet-phy@11 {
 248                         reg = <0x11>;
 249                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 250                 };
 251                 phy12: ethernet-phy@12 {
 252                         reg = <0x12>;
 253                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 254                 };
 255                 phy13: ethernet-phy@13 {
 256                         reg = <0x13>;
 257                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 258                 };
 259                 phy14: ethernet-phy@14 {
 260                         reg = <0x14>;
 261                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 262                 };
 263         };
 264 };