n810bm: Add charger detection
authorMichael Büsch <mb@bu3sch.de>
Wed, 9 Feb 2011 12:53:37 +0000 (12:53 +0000)
committerMichael Büsch <mb@bu3sch.de>
Wed, 9 Feb 2011 12:53:37 +0000 (12:53 +0000)
SVN-Revision: 25429

target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch

index 2f2061629a165e8b67c7c4793855ee67b58e7d11..31eeeb857ac78c787e617305d7d022d9812490e5 100644 (file)
@@ -12,8 +12,8 @@
 
 Index: linux-2.6.37/drivers/cbus/Kconfig
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/Kconfig     2011-02-06 00:24:48.502005279 +0100
-+++ linux-2.6.37/drivers/cbus/Kconfig  2011-02-06 00:24:48.550008091 +0100
+--- linux-2.6.37.orig/drivers/cbus/Kconfig     2011-02-06 14:05:49.838388760 +0100
++++ linux-2.6.37/drivers/cbus/Kconfig  2011-02-06 14:05:49.885395646 +0100
 @@ -94,4 +94,12 @@
          to Retu/Vilma. Detection state and events are exposed through
          sysfs.
@@ -29,8 +29,8 @@ Index: linux-2.6.37/drivers/cbus/Kconfig
  endmenu
 Index: linux-2.6.37/drivers/cbus/Makefile
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/Makefile    2011-02-06 00:24:48.493004751 +0100
-+++ linux-2.6.37/drivers/cbus/Makefile 2011-02-06 00:24:48.550008091 +0100
+--- linux-2.6.37.orig/drivers/cbus/Makefile    2011-02-06 14:05:49.829387442 +0100
++++ linux-2.6.37/drivers/cbus/Makefile 2011-02-06 14:05:49.885395646 +0100
 @@ -12,3 +12,6 @@
  obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o
  obj-$(CONFIG_CBUS_RETU_USER)  += retu-user.o
@@ -41,8 +41,8 @@ Index: linux-2.6.37/drivers/cbus/Makefile
 Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 ===================================================================
 --- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37/drivers/cbus/n810bm_main.c    2011-02-06 13:36:49.581078785 +0100
-@@ -0,0 +1,959 @@
++++ linux-2.6.37/drivers/cbus/n810bm_main.c    2011-02-09 13:47:23.831144291 +0100
+@@ -0,0 +1,1169 @@
 +/*
 + *   Nokia n810 battery management
 + *
@@ -69,11 +69,14 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +#include <linux/device.h>
 +#include <linux/platform_device.h>
 +#include <linux/slab.h>
-+#include <linux/spinlock.h>
++#include <linux/mutex.h>
 +#include <linux/timer.h>
-+#include <linux/reboot.h>
 +#include <linux/firmware.h>
++#include <linux/bitops.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
 +
++#include "cbus.h"
 +#include "retu.h"
 +#include "tahvo.h"
 +#include "lipocharge.h"
@@ -132,23 +135,38 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      N810BM_CAP_1500MAH      = 1500, /* 1500 mAh battery */
 +};
 +
++enum n810bm_notify_flags {
++      N810BM_NOTIFY_battery_charging,
++      N810BM_NOTIFY_charger_pwm,
++};
++
 +struct n810bm {
 +      bool battery_present;                   /* A battery is inserted */
 +      bool charger_present;                   /* The charger is connected */
 +      enum n810bm_capacity capacity;          /* The capacity of the inserted battery (if any) */
 +
-+      bool charger_enabled;                   /* Want to charge? */ //TODO
++      bool charger_enabled;                   /* Want to charge? */
 +      struct lipocharge charger;              /* Charger subsystem */
++      unsigned int active_current_pwm;        /* Active value of TAHVO_REG_CHGCURR */
++      int current_measure_enabled;            /* Current measure enable refcount */
 +
 +      struct platform_device *pdev;
 +      const struct firmware *pmm_block;       /* CAL PMM block */
 +
-+      struct timer_list check_timer;
++      bool verbose_charge_log;                /* Verbose charge logging */
++
++      unsigned long notify_flags;
++      struct work_struct notify_work;
++      struct work_struct currmeas_irq_work;
++      struct delayed_work periodic_check_work;
 +
 +      bool initialized;                       /* The hardware was initialized */
-+      spinlock_t lock;
++      struct mutex mutex;
 +};
 +
++static void n810bm_notify_battery_charging(struct n810bm *bm);
++static void n810bm_notify_charger_pwm(struct n810bm *bm);
++
 +
 +static inline struct n810bm * device_to_n810bm(struct device *dev)
 +{
@@ -158,13 +176,18 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      return bm;
 +}
 +
++static inline bool n810bm_known_battery_present(struct n810bm *bm)
++{
++      return bm->battery_present &&
++             bm->capacity != N810BM_CAP_UNKNOWN &&
++             bm->capacity != N810BM_CAP_NONE;
++}
++
 +static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
 +static void n810bm_emergency(struct n810bm *bm, const char *message)
 +{
 +      printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
-+      /* Force a hard shutdown. */
-+      machine_power_off();
-+      panic("n810bm: Failed to halt machine in emergency state\n");
++      cbus_emergency();
 +}
 +
 +static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
@@ -290,7 +313,8 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      return value;
 +}
 +
-+/* Set the current measure timer that triggers on Tahvo IRQ 7 */
++/* Set the current measure timer that triggers on Tahvo IRQ 7
++ * An interval of zero disables the timer. */
 +static void n810bm_set_current_measure_timer(struct n810bm *bm,
 +                                           u16 millisec_interval)
 +{
@@ -308,38 +332,39 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +                TAHVO_REG_CHGCTL_CURTIMRST);
 +      tahvo_clear(bm, TAHVO_REG_CHGCTL,
 +                  TAHVO_REG_CHGCTL_CURTIMRST);
-+}
-+
-+static void n810bm_enable_current_measure(struct n810bm *bm, bool slow, bool irq)
-+{
-+      u16 millisec_interval;
 +
-+      if (slow)
-+              millisec_interval = 1000;
-+      else
-+              millisec_interval = 250;
-+
-+      /* Enable the current measurement circuitry */
-+      tahvo_set(bm, TAHVO_REG_CHGCTL,
-+                TAHVO_REG_CHGCTL_CURMEAS);
-+
-+      /* Setup the measurement timer */
-+      n810bm_set_current_measure_timer(bm, millisec_interval);
-+      if (irq)
++      if (millisec_interval)
 +              tahvo_enable_irq(TAHVO_INT_BATCURR);
++      else
++              tahvo_disable_irq(TAHVO_INT_BATCURR);
 +
 +      //TODO also do a software timer for safety.
 +}
 +
-+static void n810bm_disable_current_measure(struct n810bm *bm)
++static void n810bm_enable_current_measure(struct n810bm *bm)
 +{
-+      /* Disable the measurement timer */
-+      n810bm_set_current_measure_timer(bm, 0);
-+      tahvo_disable_irq(TAHVO_INT_BATCURR);
++      WARN_ON(bm->current_measure_enabled < 0);
++      if (!bm->current_measure_enabled) {
++              /* Enable the current measurement circuitry */
++              tahvo_set(bm, TAHVO_REG_CHGCTL,
++                        TAHVO_REG_CHGCTL_CURMEAS);
++              dev_dbg(&bm->pdev->dev,
++                      "Current measurement circuitry enabled");
++      }
++      bm->current_measure_enabled++;
++}
 +
-+      /* Disable the current measurement circuitry */
-+      tahvo_clear(bm, TAHVO_REG_CHGCTL,
-+                  TAHVO_REG_CHGCTL_CURMEAS);
++static void n810bm_disable_current_measure(struct n810bm *bm)
++{
++      bm->current_measure_enabled--;
++      WARN_ON(bm->current_measure_enabled < 0);
++      if (!bm->current_measure_enabled) {
++              /* Disable the current measurement circuitry */
++              tahvo_clear(bm, TAHVO_REG_CHGCTL,
++                          TAHVO_REG_CHGCTL_CURMEAS);
++              dev_dbg(&bm->pdev->dev,
++                      "Current measurement circuitry disabled");
++      }
 +}
 +
 +/* Measure the actual battery current. Returns a signed value in mA.
@@ -349,6 +374,8 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      u16 retval;
 +      int adc = 0, ma, i;
 +
++      if (WARN_ON(bm->current_measure_enabled <= 0))
++              return 0;
 +      for (i = 0; i < 3; i++) {
 +              retval = tahvo_read(bm, TAHVO_REG_BATCURR);
 +              adc += (s16)retval; /* Value is signed */
@@ -361,6 +388,33 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      return ma;
 +}
 +
++/* Requires bm->mutex locked */
++static int n810bm_measure_batt_current_async(struct n810bm *bm)
++{
++      int ma;
++      bool charging = lipocharge_is_charging(&bm->charger);
++
++      n810bm_enable_current_measure(bm);
++      if (!charging)
++              WARN_ON(bm->active_current_pwm != 0);
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_EN |
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    TAHVO_REG_CHGCTL_EN |
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
++      ma = n810bm_measure_batt_current(bm);
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_EN |
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    (charging ? TAHVO_REG_CHGCTL_EN : 0));
++      n810bm_disable_current_measure(bm);
++
++      return ma;
++}
++
 +static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
 +{
 +      int value;
@@ -411,6 +465,9 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +              return 2800;
 +      mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
 +
++      //TODO compensate for power consumption
++      //TODO honor calibration values
++
 +      return mv;
 +}
 +
@@ -492,17 +549,73 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      return percent;
 +}
 +
++static void n810bm_start_charge(struct n810bm *bm)
++{
++      int err;
++
++      WARN_ON(!bm->battery_present);
++      WARN_ON(!bm->charger_present);
++
++      /* Set PWM to zero */
++      bm->active_current_pwm = 0;
++      tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++      /* Charge global enable */
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_EN |
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    TAHVO_REG_CHGCTL_EN);
++
++      WARN_ON((int)bm->capacity <= 0);
++      bm->charger.capacity = bm->capacity;
++      err = lipocharge_start(&bm->charger);
++      WARN_ON(err);
++
++      /* Initialize current measurement circuitry */
++      n810bm_enable_current_measure(bm);
++      n810bm_set_current_measure_timer(bm, 250);
++
++      dev_info(&bm->pdev->dev, "Charging battery");
++      n810bm_notify_charger_pwm(bm);
++      n810bm_notify_battery_charging(bm);
++}
++
++static void n810bm_stop_charge(struct n810bm *bm)
++{
++      if (lipocharge_is_charging(&bm->charger)) {
++              n810bm_set_current_measure_timer(bm, 0);
++              n810bm_disable_current_measure(bm);
++      }
++      lipocharge_stop(&bm->charger);
++
++      /* Set PWM to zero */
++      bm->active_current_pwm = 0;
++      tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++      /* Charge global disable */
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_EN |
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    0);
++
++      dev_info(&bm->pdev->dev, "Not charging battery");
++      n810bm_notify_charger_pwm(bm);
++      n810bm_notify_battery_charging(bm);
++}
++
 +/* Periodic check */
-+static void n810bm_check_timer(unsigned long data)
++static void n810bm_periodic_check_work(struct work_struct *work)
 +{
-+      struct n810bm *bm = (struct n810bm *)data;
-+      unsigned long flags;
++      struct n810bm *bm = container_of(to_delayed_work(work),
++                                       struct n810bm, periodic_check_work);
 +      u16 status;
 +      bool battery_was_present, charger_was_present;
 +      bool force_charge = 0;
 +      int mv;
 +
-+      spin_lock_irqsave(&bm->lock, flags);
++      mutex_lock(&bm->mutex);
 +
 +      status = retu_read(bm, RETU_REG_STATUS);
 +      battery_was_present = bm->battery_present;
@@ -523,7 +636,7 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +              } else {
 +                      bm->capacity = N810BM_CAP_NONE;
 +                      dev_info(&bm->pdev->dev, "The main battery was removed");
-+                      //TODO what do if charging?
++                      //TODO disable charging
 +              }
 +      }
 +
@@ -534,6 +647,7 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      }
 +
 +      if (bm->battery_present && !lipocharge_is_charging(&bm->charger)) {
++              /* We're draining the battery */
 +              mv = n810bm_measure_batt_voltage(bm);
 +              if (mv < 0)
 +                      n810bm_emergency(bm, "check timer: Failed to measure");
@@ -546,18 +660,25 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +              }
 +      }
 +
-+      if (bm->charger_present && bm->battery_present) {
++      if (bm->charger_present && n810bm_known_battery_present(bm)) {
++              /* Known battery and charger are connected */
 +              if (bm->charger_enabled || force_charge) {
++                      /* Charger is enabled */
 +                      if (!lipocharge_is_charging(&bm->charger)) {
 +                              //TODO start charging, if battery is below some threshold
++                              n810bm_start_charge(bm);
 +                      }
 +              }
 +      }
 +
-+      mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
-+      spin_unlock_irqrestore(&bm->lock, flags);
++      if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
++              /* Charger was unplugged. */
++              n810bm_stop_charge(bm);
++      }
 +
-+      return;
++      mutex_unlock(&bm->mutex);
++      schedule_delayed_work(&bm->periodic_check_work,
++                            round_jiffies_relative(N810BM_CHECK_INTERVAL));
 +}
 +
 +static void n810bm_adc_irq_handler(unsigned long data)
@@ -566,7 +687,54 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +
 +      retu_ack_irq(RETU_INT_ADCS);
 +      //TODO
-+dev_dbg(&bm->pdev->dev, "ADC interrupt triggered\n");
++dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
++}
++
++static void n810bm_tahvo_current_measure_work(struct work_struct *work)
++{
++      struct n810bm *bm = container_of(work, struct n810bm, currmeas_irq_work);
++      int res, ma, mv, temp;
++
++      mutex_lock(&bm->mutex);
++      if (!lipocharge_is_charging(&bm->charger))
++              goto out_unlock;
++
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    TAHVO_REG_CHGCTL_PWMOVR);
++      ma = n810bm_measure_batt_current(bm);
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO);
++      msleep(10);
++      mv = n810bm_measure_batt_voltage(bm);
++      tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++                    TAHVO_REG_CHGCTL_PWMOVR |
++                    TAHVO_REG_CHGCTL_PWMOVRZERO,
++                    0);
++      temp = n810bm_measure_batt_temp(bm);
++      if (WARN_ON(mv < 0))
++              goto out_unlock;
++      if (WARN_ON(temp < 0))
++              goto out_unlock;
++
++      if (bm->verbose_charge_log) {
++              dev_info(&bm->pdev->dev,
++                       "Battery charge state: %d mV, %d mA (%s)",
++                       mv, ma,
++                       (ma <= 0) ? "discharging" : "charging");
++      }
++      res = lipocharge_update_state(&bm->charger, mv, ma, temp);
++      if (res) {
++              if (res > 0)
++                      dev_info(&bm->pdev->dev, "Battery fully charged");
++              n810bm_stop_charge(bm);
++      }
++out_unlock:
++      mutex_unlock(&bm->mutex);
 +}
 +
 +static void n810bm_tahvo_current_measure_irq_handler(unsigned long data)
@@ -574,261 +742,279 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      struct n810bm *bm = (struct n810bm *)data;
 +
 +      tahvo_ack_irq(TAHVO_INT_BATCURR);
-+      //TODO
-+dev_dbg(&bm->pdev->dev, "Tahvo measure IRQ triggered\n");
++      schedule_work(&bm->currmeas_irq_work);
 +}
 +
++#define DEFINE_ATTR_NOTIFY(attr_name)                                         \
++      void n810bm_notify_##attr_name(struct n810bm *bm)                       \
++      {                                                                       \
++              set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags);          \
++              wmb();                                                          \
++              schedule_work(&bm->notify_work);                                \
++      }
++
 +#define DEFINE_SHOW_INT_FUNC(name, member)                                    \
-+      static ssize_t n810bm_##name##_show(struct device *dev,                 \
-+                                          struct device_attribute *attr,      \
-+                                          char *buf)                          \
++      static ssize_t n810bm_attr_##name##_show(struct device *dev,            \
++                                               struct device_attribute *attr, \
++                                               char *buf)                     \
 +      {                                                                       \
 +              struct n810bm *bm = device_to_n810bm(dev);                      \
 +              ssize_t count;                                                  \
 +                                                                              \
-+              spin_lock_irq(&bm->lock);                                       \
++              mutex_lock(&bm->mutex);                                         \
 +              count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member));    \
-+              spin_unlock_irq(&bm->lock);                                     \
++              mutex_unlock(&bm->mutex);                                       \
 +                                                                              \
 +              return count;                                                   \
 +      }
 +
 +#define DEFINE_STORE_INT_FUNC(name, member)                                   \
-+      static ssize_t n810bm_##name##_store(struct device *dev,                \
-+                                           struct device_attribute *attr,     \
-+                                           const char *buf, size_t count)     \
++      static ssize_t n810bm_attr_##name##_store(struct device *dev,           \
++                                                struct device_attribute *attr,\
++                                                const char *buf, size_t count)\
 +      {                                                                       \
 +              struct n810bm *bm = device_to_n810bm(dev);                      \
 +              long val;                                                       \
 +              int err;                                                        \
 +                                                                              \
-+              spin_lock_irq(&bm->lock);                                       \
++              mutex_lock(&bm->mutex);                                         \
 +              err = strict_strtol(buf, 0, &val);                              \
 +              if (!err)                                                       \
 +                      bm->member = (typeof(bm->member))val;                   \
-+              spin_unlock_irq(&bm->lock);                                     \
++              mutex_unlock(&bm->mutex);                                       \
 +                                                                              \
 +              return err ? err : count;                                       \
 +      }
 +
 +#define DEFINE_ATTR_SHOW_INT(name, member)                                    \
 +      DEFINE_SHOW_INT_FUNC(name, member)                                      \
-+      static DEVICE_ATTR(name, 0444, n810bm_##name##_show, NULL);
++      static DEVICE_ATTR(name, S_IRUGO,                                       \
++                         n810bm_attr_##name##_show, NULL);
 +
 +#define DEFINE_ATTR_SHOW_STORE_INT(name, member)                              \
 +      DEFINE_SHOW_INT_FUNC(name, member)                                      \
 +      DEFINE_STORE_INT_FUNC(name, member)                                     \
-+      static DEVICE_ATTR(name, 0644, n810bm_##name##_show,                    \
-+                                     n810bm_##name##_store);
++      static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,                             \
++                         n810bm_attr_##name##_show,                           \
++                         n810bm_attr_##name##_store);
 +
-+DEFINE_ATTR_SHOW_INT(batt_present, battery_present);
++DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
 +DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
++DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
++static DEFINE_ATTR_NOTIFY(charger_pwm);
 +DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
++DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
 +
-+static ssize_t n810bm_attr_charge_show(struct device *dev,
-+                                     struct device_attribute *attr,
-+                                     char *buf)
++static ssize_t n810bm_attr_battery_charging(struct device *dev,
++                                          struct device_attribute *attr,
++                                          char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
-+      int err = -ENODEV;
-+      ssize_t count = 0;
++      ssize_t count;
++
++      mutex_lock(&bm->mutex);
++      count = snprintf(buf, PAGE_SIZE, "%d\n",
++                       (int)lipocharge_is_charging(&bm->charger));
++      mutex_unlock(&bm->mutex);
++
++      return count;
++}
++static DEVICE_ATTR(battery_charging, S_IRUGO,
++                 n810bm_attr_battery_charging, NULL);
++static DEFINE_ATTR_NOTIFY(battery_charging);
++
++static ssize_t n810bm_attr_battery_level_show(struct device *dev,
++                                            struct device_attribute *attr,
++                                            char *buf)
++{
++      struct n810bm *bm = device_to_n810bm(dev);
++      ssize_t count = -ENODEV;
 +      int millivolt;
 +
-+      spin_lock_irq(&bm->lock);
-+      if (bm->battery_present) {
++      mutex_lock(&bm->mutex);
++      if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
++              millivolt = 0;
++      else
 +              millivolt = n810bm_measure_batt_voltage(bm);
-+              if (millivolt >= 0) {
-+                      count = snprintf(buf, PAGE_SIZE, "%u\n",
-+                                       n810bm_mvolt2percent(millivolt));
-+                      err = 0;
-+              }
-+      } else {
-+              count = snprintf(buf, PAGE_SIZE, "no battery\n");
-+              err = 0;
++      if (millivolt >= 0) {
++              count = snprintf(buf, PAGE_SIZE, "%u\n",
++                               n810bm_mvolt2percent(millivolt));
 +      }
-+      spin_unlock_irq(&bm->lock);
++      mutex_unlock(&bm->mutex);
 +
-+      return err ? err : count;
++      return count;
 +}
-+static DEVICE_ATTR(batt_charge, 0444, n810bm_attr_charge_show, NULL);
++static DEVICE_ATTR(battery_level, S_IRUGO,
++                 n810bm_attr_battery_level_show, NULL);
 +
-+static ssize_t n810bm_attr_capacity_show(struct device *dev,
-+                                       struct device_attribute *attr,
-+                                       char *buf)
++static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
++                                               struct device_attribute *attr,
++                                               char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
 +      ssize_t count;
++      int capacity = 0;
 +
-+      spin_lock_irq(&bm->lock);
-+      if (bm->battery_present) {
-+              count = snprintf(buf, PAGE_SIZE, "%d\n",
-+                               (int)bm->capacity);
-+      } else
-+              count = snprintf(buf, PAGE_SIZE, "no battery\n");
-+      spin_unlock_irq(&bm->lock);
++      mutex_lock(&bm->mutex);
++      if (n810bm_known_battery_present(bm))
++              capacity = (int)bm->capacity;
++      count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
++      mutex_unlock(&bm->mutex);
 +
 +      return count;
 +}
-+static DEVICE_ATTR(batt_capacity, 0444, n810bm_attr_capacity_show, NULL);
++static DEVICE_ATTR(battery_capacity, S_IRUGO,
++                 n810bm_attr_battery_capacity_show, NULL);
 +
-+static ssize_t n810bm_attr_battemp_show(struct device *dev,
-+                                      struct device_attribute *attr,
-+                                      char *buf)
++static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
++                                           struct device_attribute *attr,
++                                           char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      int k, err = -ENODEV;
++      ssize_t count = -ENODEV;
++      int k;
 +
-+      spin_lock_irq(&bm->lock);
++      mutex_lock(&bm->mutex);
 +      k = n810bm_measure_batt_temp(bm);
-+      if (k >= 0) {
++      if (k >= 0)
 +              count = snprintf(buf, PAGE_SIZE, "%d\n", k);
-+              err = 0;
-+      }
-+      spin_unlock_irq(&bm->lock);
++      mutex_unlock(&bm->mutex);
 +
-+      return err ? err : count;
++      return count;
 +}
-+static DEVICE_ATTR(batt_temp, 0444, n810bm_attr_battemp_show, NULL);
++static DEVICE_ATTR(battery_temp, S_IRUGO,
++                 n810bm_attr_battery_temp_show, NULL);
 +
 +static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
 +                                              struct device_attribute *attr,
 +                                              char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      int mv, err = -ENODEV;
++      ssize_t count = -ENODEV;
++      int mv = 0;
 +
-+      spin_lock_irq(&bm->lock);
-+      if (bm->charger_present) {
++      mutex_lock(&bm->mutex);
++      if (bm->charger_present)
 +              mv = n810bm_measure_charger_voltage(bm);
-+              if (mv >= 0) {
-+                      count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+                      err = 0;
-+              }
-+      } else {
-+              count = snprintf(buf, PAGE_SIZE, "no charger\n");
-+              err = 0;
-+      }
-+      spin_unlock_irq(&bm->lock);
++      if (mv >= 0)
++              count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
++      mutex_unlock(&bm->mutex);
 +
-+      return err ? err : count;
++      return count;
 +}
-+static DEVICE_ATTR(charger_voltage, 0444, n810bm_attr_charger_voltage_show, NULL);
++static DEVICE_ATTR(charger_voltage, S_IRUGO,
++                 n810bm_attr_charger_voltage_show, NULL);
 +
-+static ssize_t n810bm_attr_backup_batt_voltage_show(struct device *dev,
-+                                                  struct device_attribute *attr,
-+                                                  char *buf)
++static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
++                                                     struct device_attribute *attr,
++                                                     char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      int mv, err = -ENODEV;
++      ssize_t count = -ENODEV;
++      int mv;
 +
-+      spin_lock_irq(&bm->lock);
++      mutex_lock(&bm->mutex);
 +      mv = n810bm_measure_backup_batt_voltage(bm);
-+      if (mv >= 0) {
++      if (mv >= 0)
 +              count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+              err = 0;
-+      }
-+      spin_unlock_irq(&bm->lock);
++      mutex_unlock(&bm->mutex);
 +
-+      return err ? err : count;
++      return count;
 +}
-+static DEVICE_ATTR(backup_batt_voltage, 0444, n810bm_attr_backup_batt_voltage_show, NULL);
++static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
++                 n810bm_attr_backup_battery_voltage_show, NULL);
 +
-+static ssize_t n810bm_attr_batt_current_show(struct device *dev,
-+                                           struct device_attribute *attr,
-+                                           char *buf)
++static ssize_t n810bm_attr_battery_current_show(struct device *dev,
++                                              struct device_attribute *attr,
++                                              char *buf)
 +{
 +      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      int ma;
++      ssize_t count = -ENODEV;
++      int ma = 0;
 +
-+      spin_lock_irq(&bm->lock);
-+      if (bm->battery_present) {
-+              ma = n810bm_measure_batt_current(bm);//FIXME
-+              count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
-+      } else
-+              count = snprintf(buf, PAGE_SIZE, "no battery\n");
-+      spin_unlock_irq(&bm->lock);
++      mutex_lock(&bm->mutex);
++      if (bm->battery_present)
++              ma = n810bm_measure_batt_current_async(bm);
++      count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
++      mutex_unlock(&bm->mutex);
 +
 +      return count;
 +}
-+static DEVICE_ATTR(batt_current, 0444, n810bm_attr_batt_current_show, NULL);
-+
-+//TODO remove this
-+static ssize_t n810bm_attr_charger_status_show(struct device *dev,
-+                                             struct device_attribute *attr,
-+                                             char *buf)
-+{
-+      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      unsigned int stat;
++static DEVICE_ATTR(battery_current, S_IRUGO,
++                 n810bm_attr_battery_current_show, NULL);
 +
-+      spin_lock_irq(&bm->lock);
-+      stat = retu_read(bm, RETU_REG_STATUS);
-+      count = snprintf(buf, PAGE_SIZE, "0x%X\n", stat);
-+      spin_unlock_irq(&bm->lock);
++static const struct device_attribute *n810bm_attrs[] = {
++      &dev_attr_battery_present,
++      &dev_attr_battery_level,
++      &dev_attr_battery_charging,
++      &dev_attr_battery_current,
++      &dev_attr_battery_capacity,
++      &dev_attr_battery_temp,
++      &dev_attr_backup_battery_voltage,
++      &dev_attr_charger_present,
++      &dev_attr_charger_verbose,
++      &dev_attr_charger_voltage,
++      &dev_attr_charger_enable,
++      &dev_attr_charger_pwm,
++};
 +
-+      return count;
++static void n810bm_notify_work(struct work_struct *work)
++{
++      struct n810bm *bm = container_of(work, struct n810bm, notify_work);
++      unsigned long notify_flags;
++
++      notify_flags = xchg(&bm->notify_flags, 0);
++      mb();
++
++#define do_notify(attr_name)                                          \
++      do {                                                            \
++              if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) {  \
++                      sysfs_notify(&bm->pdev->dev.kobj, NULL,         \
++                                   dev_attr_##attr_name.attr.name);   \
++              }                                                       \
++      } while (0)
++
++      do_notify(battery_charging);
++      do_notify(charger_pwm);
 +}
-+static DEVICE_ATTR(charger_status, 0444, n810bm_attr_charger_status_show, NULL);
 +
-+//TODO remove this
-+static ssize_t n810bm_attr_charge_current_show(struct device *dev,
-+                                             struct device_attribute *attr,
-+                                             char *buf)
++static int n810bm_charger_set_current_pwm(struct lipocharge *c,
++                                        unsigned int duty_cycle)
 +{
-+      struct n810bm *bm = device_to_n810bm(dev);
-+      ssize_t count = 0;
-+      unsigned int val;
++      struct n810bm *bm = container_of(c, struct n810bm, charger);
++      int err = -EINVAL;
++
++      WARN_ON(!mutex_is_locked(&bm->mutex));
++      if (WARN_ON(duty_cycle > 0xFF))
++              goto out;
++      if (WARN_ON(!bm->charger_enabled))
++              goto out;
++      if (WARN_ON(!bm->battery_present || !bm->charger_present))
++              goto out;
++
++      if (duty_cycle != bm->active_current_pwm) {
++              bm->active_current_pwm = duty_cycle;
++              tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
++              n810bm_notify_charger_pwm(bm);
++      }
 +
-+      spin_lock_irq(&bm->lock);
-+      val = tahvo_read(bm, TAHVO_REG_CHGCURR);
-+      count = snprintf(buf, PAGE_SIZE, "0x%X\n", val);
-+      spin_unlock_irq(&bm->lock);
++      err = 0;
++out:
 +
-+      return count;
++      return err;
 +}
 +
-+static ssize_t n810bm_attr_charge_current_store(struct device *dev,
-+                                              struct device_attribute *attr,
-+                                              const char *buf, size_t count)
++static void n810bm_charger_emergency(struct lipocharge *c)
 +{
-+      struct n810bm *bm = device_to_n810bm(dev);
-+      unsigned long val;
-+      int err;
-+
-+      spin_lock_irq(&bm->lock);
-+      err = strict_strtoul(buf, 0, &val);
-+      if (!err && val <= 0xFF)
-+              tahvo_write(bm, TAHVO_REG_CHGCURR, val);
-+      spin_unlock_irq(&bm->lock);
++      struct n810bm *bm = container_of(c, struct n810bm, charger);
 +
-+      return err ? err : count;
++      n810bm_emergency(bm, "Battery charger fault");
 +}
-+static DEVICE_ATTR(charge_current, 0644,
-+                 n810bm_attr_charge_current_show,
-+                 n810bm_attr_charge_current_store);
-+
-+static const struct device_attribute *n810bm_attrs[] = {
-+      &dev_attr_batt_present,
-+      &dev_attr_batt_charge,
-+      &dev_attr_batt_current,
-+      &dev_attr_batt_capacity,
-+      &dev_attr_batt_temp,
-+      &dev_attr_backup_batt_voltage,
-+      &dev_attr_charger_present,
-+      &dev_attr_charger_voltage,
-+      &dev_attr_charger_status,
-+      &dev_attr_charger_enable,
-+      &dev_attr_charge_current,
-+};
 +
 +static void n810bm_hw_exit(struct n810bm *bm)
 +{
++      n810bm_stop_charge(bm);
 +      retu_write(bm, RETU_REG_ADCSCR, 0);
-+      //TODO
 +}
 +
 +static int n810bm_hw_init(struct n810bm *bm)
@@ -839,14 +1025,31 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      if (err)
 +              return err;
 +
++      n810bm_stop_charge(bm);
++
 +      return 0;
 +}
 +
++static void n810bm_cancel_and_flush_work(struct n810bm *bm)
++{
++      cancel_delayed_work_sync(&bm->periodic_check_work);
++      cancel_work_sync(&bm->notify_work);
++      cancel_work_sync(&bm->currmeas_irq_work);
++      flush_scheduled_work();
++}
++
 +static int n810bm_device_init(struct n810bm *bm)
 +{
 +      int attr_index;
 +      int err;
 +
++      bm->charger.rate = LIPORATE_p6C;
++      bm->charger.top_voltage = 4100;
++      bm->charger.duty_cycle_max = 0xFF;
++      bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
++      bm->charger.emergency = n810bm_charger_emergency;
++      lipocharge_init(&bm->charger, &bm->pdev->dev);
++
 +      err = n810bm_hw_init(bm);
 +      if (err)
 +              goto error;
@@ -865,9 +1068,10 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +                              (unsigned long)bm, "n810bm");
 +      if (err)
 +              goto err_free_retu_irq;
++      tahvo_disable_irq(TAHVO_INT_BATCURR);
 +
-+      lipocharge_init(&bm->charger);
-+      mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
++      schedule_delayed_work(&bm->periodic_check_work,
++                            round_jiffies_relative(N810BM_CHECK_INTERVAL));
 +
 +      bm->initialized = 1;
 +      dev_info(&bm->pdev->dev, "Battery management initialized");
@@ -882,6 +1086,8 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +/*err_exit:*/
 +      n810bm_hw_exit(bm);
 +error:
++      n810bm_cancel_and_flush_work(bm);
++
 +      return err;
 +}
 +
@@ -895,9 +1101,11 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +      lipocharge_exit(&bm->charger);
 +      tahvo_free_irq(TAHVO_INT_BATCURR);
 +      retu_free_irq(RETU_INT_ADCS);
-+      del_timer_sync(&bm->check_timer);
 +      for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
 +              device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
++
++      n810bm_cancel_and_flush_work(bm);
++
 +      n810bm_hw_exit(bm);
 +      release_firmware(bm->pmm_block);
 +
@@ -944,8 +1152,10 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +              return -ENOMEM;
 +      bm->pdev = pdev;
 +      platform_set_drvdata(pdev, bm);
-+      spin_lock_init(&bm->lock);
-+      setup_timer(&bm->check_timer, n810bm_check_timer, (unsigned long)bm);
++      mutex_init(&bm->mutex);
++      INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
++      INIT_WORK(&bm->notify_work, n810bm_notify_work);
++      INIT_WORK(&bm->currmeas_irq_work, n810bm_tahvo_current_measure_work);
 +
 +      dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
 +               N810BM_PMM_BLOCK_FILENAME);
@@ -1004,8 +1214,8 @@ Index: linux-2.6.37/drivers/cbus/n810bm_main.c
 +MODULE_AUTHOR("Michael Buesch");
 Index: linux-2.6.37/drivers/cbus/retu.c
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/retu.c      2011-02-06 00:24:48.493004751 +0100
-+++ linux-2.6.37/drivers/cbus/retu.c   2011-02-06 00:24:48.551008149 +0100
+--- linux-2.6.37.orig/drivers/cbus/retu.c      2011-02-06 14:05:49.829387442 +0100
++++ linux-2.6.37/drivers/cbus/retu.c   2011-02-08 17:33:18.981369017 +0100
 @@ -85,10 +85,10 @@
   *
   * This function writes a value to the specified register
@@ -1019,10 +1229,18 @@ Index: linux-2.6.37/drivers/cbus/retu.c
  }
  
  void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
+@@ -459,6 +459,7 @@
+ EXPORT_SYMBOL(retu_ack_irq);
+ EXPORT_SYMBOL(retu_read_reg);
+ EXPORT_SYMBOL(retu_write_reg);
++EXPORT_SYMBOL(retu_read_adc);
+ subsys_initcall(retu_init);
+ module_exit(retu_exit);
 Index: linux-2.6.37/drivers/cbus/retu.h
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/retu.h      2011-02-06 00:24:48.493004751 +0100
-+++ linux-2.6.37/drivers/cbus/retu.h   2011-02-06 00:24:48.551008149 +0100
+--- linux-2.6.37.orig/drivers/cbus/retu.h      2011-02-06 14:05:49.829387442 +0100
++++ linux-2.6.37/drivers/cbus/retu.h   2011-02-06 14:05:49.886395793 +0100
 @@ -40,6 +40,8 @@
  #define RETU_REG_CTRL_CLR     0x0f    /* Regulator clear register */
  #define RETU_REG_CTRL_SET     0x10    /* Regulator set register */
@@ -1061,8 +1279,8 @@ Index: linux-2.6.37/drivers/cbus/retu.h
  int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
 Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
 ===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-02-06 00:24:48.478003872 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c      2011-02-06 00:24:48.551008149 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-02-06 14:05:49.815385390 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c      2011-02-06 14:05:49.886395793 +0100
 @@ -907,6 +907,17 @@
                                    ARRAY_SIZE(n8x0_gpio_switches));
  }
@@ -1093,12 +1311,12 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
 Index: linux-2.6.37/drivers/cbus/lipocharge.c
 ===================================================================
 --- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37/drivers/cbus/lipocharge.c     2011-02-06 12:57:01.427475867 +0100
-@@ -0,0 +1,58 @@
++++ linux-2.6.37/drivers/cbus/lipocharge.c     2011-02-09 12:42:58.243147563 +0100
+@@ -0,0 +1,183 @@
 +/*
 + *   Generic LIPO battery charger
 + *
-+ *   Copyright (c) 2010 Michael Buesch <mb@bu3sch.de>
++ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
 + *
 + *   This program is free software; you can redistribute it and/or
 + *   modify it under the terms of the GNU General Public License
@@ -1111,112 +1329,242 @@ Index: linux-2.6.37/drivers/cbus/lipocharge.c
 + *   GNU General Public License for more details.
 + */
 +
++#define DEBUG
++
 +#include "lipocharge.h"
 +
 +#include <linux/slab.h>
 +
 +
-+static void lipocharge_timer(unsigned long data)
-+{
-+      struct lipocharge *c = (struct lipocharge *)data;
++/* Hysteresis constants */
++#define CURRENT_HYST          30 /* mA */
++#define VOLTAGE_HYST          10 /* mV */
 +
-+      spin_lock(&c->lock);
-+      //TODO
-+      spin_unlock(&c->lock);
++/* Threshold constants */
++#define FINISH_CURRENT_PERCENT        3
++
++
++/* Returns the requested first-stage charge current in mA */
++static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
++{
++      /* current = (capacity * C) */
++      return c->capacity * c->rate / 1000;
 +}
 +
-+void lipocharge_init(struct lipocharge *c)
++void lipocharge_init(struct lipocharge *c, struct device *dev)
 +{
-+      spin_lock_init(&c->lock);
-+      setup_timer(&c->timer, lipocharge_timer, (unsigned long)c);
++      c->dev = dev;
++      c->state = LIPO_IDLE;
 +}
 +
 +void lipocharge_exit(struct lipocharge *c)
 +{
++      c->state = LIPO_IDLE;
 +}
 +
 +int lipocharge_start(struct lipocharge *c)
 +{
-+      if (!c->set_charge_current || !c->get_charge_current ||
-+          !c->get_voltage ||
-+          !c->finished || !c->emergency)
++      int err;
++
++      if (c->state != LIPO_IDLE)
++              return -EBUSY;
++      if (!c->set_current_pwm || !c->emergency)
 +              return -EINVAL;
 +      if (!c->top_voltage || c->top_voltage > 4200)
 +              return -EINVAL;
-+      //TODO
++
++      c->active_duty_cycle = 0;
++      err = c->set_current_pwm(c, c->active_duty_cycle);
++      if (err)
++              return err;
++      c->state = LIPO_FIRST_STAGE;
 +
 +      return 0;
 +}
 +
 +void lipocharge_stop(struct lipocharge *c)
 +{
-+      del_timer_sync(&c->timer);
-+      //TODO
++      if (c->state == LIPO_IDLE)
++              return;
++      c->state = LIPO_IDLE;
++}
++
++static int lipocharge_increase_current(struct lipocharge *c,
++                                     unsigned int inc_permille)
++{
++      int old_pwm, new_pwm;
++
++      if (c->active_duty_cycle >= c->duty_cycle_max)
++              return 0;
++
++      old_pwm = c->active_duty_cycle;
++      new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
++      new_pwm = min(new_pwm, (int)c->duty_cycle_max);
++      c->active_duty_cycle = new_pwm;
++
++      dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
++              "%u permille (0x%02X -> 0x%02X)",
++              inc_permille, old_pwm, new_pwm);
++
++      return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++static int lipocharge_decrease_current(struct lipocharge *c,
++                                     unsigned int dec_permille)
++{
++      int old_pwm, new_pwm;
++
++      if (c->active_duty_cycle <= 0)
++              return 0;
++
++      old_pwm = c->active_duty_cycle;
++      new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
++      new_pwm = max(0, new_pwm);
++      c->active_duty_cycle = new_pwm;
++
++      dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
++              "%u permille (0x%02X -> 0x%02X)",
++              dec_permille, old_pwm, new_pwm);
++
++      return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++/** lipocharge_update_state - Update the charge state
++ * @c: The context.
++ * @voltage_mV: The measured battery voltage.
++ * @current_mA: The measured charge current.
++ *            negative -> drain.
++ *            positive -> charge.
++ * @temp_K: Battery temperature in K.
++ *
++ * Returns 0 on success, -1 on error.
++ * Returns 1, if the charging process is finished.
++ */
++int lipocharge_update_state(struct lipocharge *c,
++                          unsigned int voltage_mV,
++                          int current_mA,
++                          unsigned int temp_K)
++{
++      int requested_current, current_diff;
++      int err;
++      unsigned int permille;
++
++      //TODO temp
++
++restart:
++      switch (c->state) {
++      case LIPO_IDLE:
++              dev_err(c->dev, "%s: called while idle", __func__);
++              return -EINVAL;
++      case LIPO_FIRST_STAGE:  /* Constant current */
++//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
++              if (voltage_mV >= c->top_voltage) {
++                      /* Float voltage reached.
++                       * Switch charger mode to "constant current" */
++                      c->state = LIPO_SECOND_STAGE;
++                      dev_dbg(c->dev, "Switched to second charging stage.");
++                      goto restart;
++              }
++              /* Float voltage not reached, yet.
++               * Try to get the requested constant current. */
++              requested_current = get_stage1_charge_current(c);
++              if (current_mA < 0)
++                      current_mA = 0;
++              current_diff = requested_current - current_mA;
++              if (abs(requested_current - current_mA) > CURRENT_HYST) {
++                      if (current_diff > 0) {
++                              /* Increase current */
++                              permille = current_diff * 1000 / requested_current;
++                              permille /= 2;
++                              err = lipocharge_increase_current(c, permille);
++                              if (err)
++                                      return err;
++                      } else {
++                              /* Decrease current */
++                              permille = (-current_diff) * 1000 / requested_current;
++                              permille /= 2;
++                              err = lipocharge_decrease_current(c, permille);
++                              if (err)
++                                      return err;
++                      }
++              }
++              break;
++      case LIPO_SECOND_STAGE: /* Constant voltage */
++              //TODO
++              break;
++      }
++
++      return 0;
 +}
 Index: linux-2.6.37/drivers/cbus/lipocharge.h
 ===================================================================
 --- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37/drivers/cbus/lipocharge.h     2011-02-06 12:36:29.800830614 +0100
-@@ -0,0 +1,55 @@
++++ linux-2.6.37/drivers/cbus/lipocharge.h     2011-02-07 20:07:29.669098631 +0100
+@@ -0,0 +1,60 @@
 +#ifndef LIPOCHARGE_H_
 +#define LIPOCHARGE_H_
 +
-+#include <linux/timer.h>
-+#include <linux/spinlock.h>
++#include <linux/types.h>
++#include <linux/device.h>
 +
 +
-+#define LIPORATE(a,b) (((a) * 1000) + (b))
-+#define LIPORATE_1C   LIPORATE(1,0)   /* 1C */
-+#define LIPORATE_p8C  LIPORATE(0,8)   /* 0.8C */
++#define LIPORATE(a,b) (((a) * 1000) + ((b) * 100))
 +#define LIPORATE_p6C  LIPORATE(0,6)   /* 0.6C */
 +
++enum lipocharge_state {
++      LIPO_IDLE,              /* Not charging */
++      LIPO_FIRST_STAGE,       /* Charging: constant current */
++      LIPO_SECOND_STAGE,      /* Charging: constant voltage */
++};
++
 +/** struct lipocharge - A generic LIPO charger
 + *
 + * @capacity: Battery capacity in mAh.
 + * @rate: Charge rate.
 + * @top_voltage: Fully charged voltage, in mV.
++ * @duty_cycle_max: Max value for duty_cycle.
 + *
-+ * @set_charge_current: Set the charge current, in mA.
-+ * @get_charge_current: Get the battery current, in signed mA.
-+ * @get_voltage: Get the battery voltage, in mV.
-+ *
-+ * @finished: Charging finished.
++ * @set_charge_current: Set the charge current PWM duty cycle.
 + * @emergency: Something went wrong. Force shutdown.
 + */
 +struct lipocharge {
 +      unsigned int capacity;
 +      unsigned int rate;
 +      unsigned int top_voltage;
++      unsigned int duty_cycle_max;
 +
-+      int (*set_charge_current)(struct lipocharge *c, unsigned int ma);
-+      int (*get_charge_current)(struct lipocharge *c, int *ma);
-+      int (*get_voltage)(struct lipocharge *c, unsigned int *mv);
-+
-+      void (*finished)(struct lipocharge *c);
++      int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
 +      void (*emergency)(struct lipocharge *c);
 +
 +      /* internal */
-+      spinlock_t lock;
-+      struct timer_list timer;
-+      bool charging;
++      struct device *dev;
++      enum lipocharge_state state;
++      unsigned int active_duty_cycle;
++
++      //TODO implement timer to cut power after maximum charge time.
 +};
 +
-+void lipocharge_init(struct lipocharge *c);
++void lipocharge_init(struct lipocharge *c, struct device *dev);
 +void lipocharge_exit(struct lipocharge *c);
 +
 +int lipocharge_start(struct lipocharge *c);
 +void lipocharge_stop(struct lipocharge *c);
 +
++int lipocharge_update_state(struct lipocharge *c,
++                          unsigned int voltage_mV,
++                          int current_mA,
++                          unsigned int temp_K);
++
 +static inline bool lipocharge_is_charging(struct lipocharge *c)
 +{
-+      return c->charging;
++      return (c->state != LIPO_IDLE);
 +}
 +
 +#endif /* LIPOCHARGE_H_ */
 Index: linux-2.6.37/drivers/cbus/tahvo.h
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/tahvo.h     2011-02-06 00:24:48.494004810 +0100
-+++ linux-2.6.37/drivers/cbus/tahvo.h  2011-02-06 00:24:48.551008149 +0100
+--- linux-2.6.37.orig/drivers/cbus/tahvo.h     2011-02-06 14:05:49.830387588 +0100
++++ linux-2.6.37/drivers/cbus/tahvo.h  2011-02-06 16:22:25.902331536 +0100
 @@ -30,17 +30,28 @@
  #define TAHVO_REG_IDR         0x01    /* Interrupt ID */
  #define TAHVO_REG_IDSR                0x02    /* Interrupt status */
@@ -1226,8 +1574,8 @@ Index: linux-2.6.37/drivers/cbus/tahvo.h
  #define TAHVO_REG_USBR                0x06    /* USB control */
 +#define TAHVO_REG_CHGCTL      0x08    /* Charge control register */
 +#define  TAHVO_REG_CHGCTL_EN          0x0001  /* Global charge enable */
-+#define  TAHVO_REG_CHGCTL_PWMOVR      0x0004  /* PWM override. Force charge PWM to 100% duty cycle. */
-+#define  TAHVO_REG_CHGCTL_UNK8                0x0008  /* XXX: Unknown. Written on init. */
++#define  TAHVO_REG_CHGCTL_PWMOVR      0x0004  /* PWM override. Force charge PWM to 0%/100% duty cycle. */
++#define  TAHVO_REG_CHGCTL_PWMOVRZERO  0x0008  /* If set, PWM override is 0% (If unset -> 100%) */
 +#define  TAHVO_REG_CHGCTL_CURMEAS     0x0040  /* Enable battery current measurement. */
 +#define  TAHVO_REG_CHGCTL_CURTIMRST   0x0080  /* Current measure timer reset. */
 +#define TAHVO_REG_BATCURRTIMER        0x0c    /* Battery current measure timer (8-bit) */
@@ -1249,8 +1597,8 @@ Index: linux-2.6.37/drivers/cbus/tahvo.h
  void tahvo_free_irq(int id);
 Index: linux-2.6.37/drivers/cbus/tahvo.c
 ===================================================================
---- linux-2.6.37.orig/drivers/cbus/tahvo.c     2011-02-06 00:24:48.494004810 +0100
-+++ linux-2.6.37/drivers/cbus/tahvo.c  2011-02-06 00:24:48.552008207 +0100
+--- linux-2.6.37.orig/drivers/cbus/tahvo.c     2011-02-06 14:05:49.830387588 +0100
++++ linux-2.6.37/drivers/cbus/tahvo.c  2011-02-06 14:05:49.886395793 +0100
 @@ -85,10 +85,10 @@
   *
   * This function writes a value to the specified register
@@ -1264,3 +1612,40 @@ Index: linux-2.6.37/drivers/cbus/tahvo.c
  }
  
  /**
+Index: linux-2.6.37/drivers/cbus/cbus.c
+===================================================================
+--- linux-2.6.37.orig/drivers/cbus/cbus.c      2011-02-08 17:34:34.988926130 +0100
++++ linux-2.6.37/drivers/cbus/cbus.c   2011-02-08 17:38:16.980407594 +0100
+@@ -31,6 +31,7 @@
+ #include <linux/gpio.h>
+ #include <linux/platform_device.h>
+ #include <linux/slab.h>
++#include <linux/reboot.h>
+ #include <asm/io.h>
+ #include <asm/mach-types.h>
+@@ -301,6 +302,13 @@
+ }
+ module_exit(cbus_bus_exit);
++void cbus_emergency(void)
++{
++      machine_power_off();
++      panic("cbus: Failed to halt machine in emergency state\n");
++}
++EXPORT_SYMBOL(cbus_emergency);
++
+ MODULE_DESCRIPTION("CBUS serial protocol");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Juha Yrjölä");
+Index: linux-2.6.37/drivers/cbus/cbus.h
+===================================================================
+--- linux-2.6.37.orig/drivers/cbus/cbus.h      2011-02-08 17:36:40.172074049 +0100
++++ linux-2.6.37/drivers/cbus/cbus.h   2011-02-08 17:41:32.680647478 +0100
+@@ -33,4 +33,6 @@
+ extern int cbus_read_reg(struct cbus_host *host, int dev, int reg);
+ extern int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val);
++NORET_TYPE void cbus_emergency(void) ATTRIB_NORET;
++
+ #endif /* __DRIVERS_CBUS_CBUS_H */