ar71xx: register RTL8366RB switch on the TL-WR1043NB board

Thanks to Andrew Tarabaras.

SVN-Revision: 19839

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
index 15dc7529c379a4806d91ae71075e439bbec2a4f7..fd8e5fce8def2fdddaa2dafb151ee20106e3c90f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -10,7 +10,8 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-
+#include <linux/platform_device.h>
+#include <linux/rtl8366rb.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "machtype.h"
@@ -29,6 +30,9 @@
 #define TL_WR1043ND_GPIO_BTN_RESET      3
 #define TL_WR1043ND_GPIO_BTN_QSS        7
 
+#define TL_WR1043ND_GPIO_RTL8366_SDA   18
+#define TL_WR1043ND_GPIO_RTL8366_SCK   19
+
 #define TL_WR1043ND_BUTTONS_POLL_INTERVAL     20
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -104,6 +108,19 @@ static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
        }
 };
 
+static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = {
+       .gpio_sda        = TL_WR1043ND_GPIO_RTL8366_SDA,
+       .gpio_sck        = TL_WR1043ND_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+       .name           = RTL8366RB_DRIVER_NAME,
+       .id             = -1,
+       .dev = {
+               .platform_data  = &tl_wr1043nd_rtl8366rb_data,
+       }
+};
+
 static void __init tl_wr1043nd_setup(void)
 {
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -111,8 +128,7 @@ static void __init tl_wr1043nd_setup(void)
 
        ar71xx_set_mac_base(mac);
 
-       ar71xx_add_device_mdio(0x0);
-
+       ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = 0x0;
        ar71xx_eth0_data.speed = SPEED_1000;
@@ -128,9 +144,12 @@ static void __init tl_wr1043nd_setup(void)
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
                                        tl_wr1043nd_leds_gpio);
 
+       platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
        ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
                                        ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
                                        tl_wr1043nd_gpio_buttons);
+
        ar913x_add_device_wmac(eeprom, mac);
 }