ath9k: merge fix for noise floor calibration
authorFelix Fietkau <nbd@openwrt.org>
Sun, 7 Feb 2016 13:29:08 +0000 (13:29 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 7 Feb 2016 13:29:08 +0000 (13:29 +0000)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48641

package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch [new file with mode: 0644]
package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
package/kernel/mac80211/patches/530-ath9k_extra_leds.patch

diff --git a/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch
new file mode 100644 (file)
index 0000000..71f7a40
--- /dev/null
@@ -0,0 +1,87 @@
+From: Miaoqing Pan <miaoqing@codeaurora.org>
+Date: Fri, 5 Feb 2016 09:45:50 +0800
+Subject: [PATCH] ath9k: make NF load complete quickly and reliably
+
+Make NF load complete quickly and reliably. NF load execution
+is delayed by HW to end of frame if frame Rx or Tx is ongoing.
+Increasing timeout to max frame duration. If NF cal is ongoing
+before NF load, stop it before load, and restart it afterwards.
+
+Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/calib.c
++++ b/drivers/net/wireless/ath/ath9k/calib.c
+@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+       u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
+       struct ath_common *common = ath9k_hw_common(ah);
+       s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
++      u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL);
+       if (ah->caldata)
+               h = ah->caldata->nfCalHist;
+@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+       }
+       /*
++       * stop NF cal if ongoing to ensure NF load completes immediately
++       * (or after end rx/tx frame if ongoing)
++       */
++      if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
++              REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
++              REG_RMW_BUFFER_FLUSH(ah);
++              ENABLE_REG_RMW_BUFFER(ah);
++      }
++
++      /*
+        * Load software filtered NF value into baseband internal minCCApwr
+        * variable.
+        */
+@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+       /*
+        * Wait for load to complete, should be fast, a few 10s of us.
+-       * The max delay was changed from an original 250us to 10000us
+-       * since 250us often results in NF load timeout and causes deaf
+-       * condition during stress testing 12/12/2009
++       * The max delay was changed from an original 250us to 22.2 msec.
++       * This would increase timeout to the longest possible frame
++       * (11n max length 22.1 msec)
+        */
+-      for (j = 0; j < 10000; j++) {
++      for (j = 0; j < 22200; j++) {
+               if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
+-                   AR_PHY_AGC_CONTROL_NF) == 0)
++                            AR_PHY_AGC_CONTROL_NF) == 0)
+                       break;
+               udelay(10);
+       }
+       /*
++       * Restart NF so it can continue.
++       */
++      if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
++              ENABLE_REG_RMW_BUFFER(ah);
++              if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF)
++                      REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
++                                  AR_PHY_AGC_CONTROL_ENABLE_NF);
++              if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF)
++                      REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
++                                  AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
++              REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
++              REG_RMW_BUFFER_FLUSH(ah);
++      }
++
++      /*
+        * We timed out waiting for the noisefloor to load, probably due to an
+        * in-progress rx. Simply return here and allow the load plenty of time
+        * to complete before the next calibration interval.  We need to avoid
+@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
+        * here, the baseband nf cal will just be capped by our present
+        * noisefloor until the next calibration timer.
+        */
+-      if (j == 10000) {
++      if (j == 22200) {
+               ath_dbg(common, ANY,
+                       "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
+                       REG_READ(ah, AR_PHY_AGC_CONTROL));
index ef9258b41869d959a7b027f19831a99bb3f28592..e151a12967ccf90d2de7cfde5728803b1069591c 100644 (file)
@@ -18,7 +18,7 @@
                                const u8 *addr);
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -1282,6 +1282,7 @@ enum ieee80211_smps_mode {
+@@ -1286,6 +1286,7 @@ enum ieee80211_smps_mode {
   *
   * @power_level: requested transmit power (in dBm), backward compatibility
   *    value only that is set to the minimum of all interfaces
@@ -26,7 +26,7 @@
   *
   * @chandef: the channel definition to tune to
   * @radar_enabled: whether radar detection is enabled
-@@ -1302,6 +1303,7 @@ enum ieee80211_smps_mode {
+@@ -1306,6 +1307,7 @@ enum ieee80211_smps_mode {
  struct ieee80211_conf {
        u32 flags;
        int power_level, dynamic_ps_timeout;
@@ -87,7 +87,7 @@
        CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1317,6 +1317,7 @@ struct ieee80211_local {
+@@ -1318,6 +1318,7 @@ struct ieee80211_local {
        int dynamic_ps_forced_timeout;
  
        int user_power_level; /* in dBm, for all interfaces */
index 50ddd0b9d9a0eb369f1e628ae11f109985714a36..5a5e4643f5287e1426dd63a662b1f9b75cf22c80 100644 (file)
@@ -54,7 +54,8 @@
 +                        (brightness != LED_OFF) ^ led->gpio->active_low);
 +      ath9k_ps_restore(sc);
 +}
-+
+-      ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
 +static int ath_add_led(struct ath_softc *sc, struct ath_led *led)
 +{
 +      const struct gpio_led *gpio = led->gpio;
@@ -63,8 +64,7 @@
 +      led->cdev.name = gpio->name;
 +      led->cdev.default_trigger = gpio->default_trigger;
 +      led->cdev.brightness_set = ath_led_brightness;
--      ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
++
 +      ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->cdev);
 +      if (ret < 0)
 +              return ret;