add initial support for hardware accelerated byte swapping
authorGabor Juhos <juhosg@openwrt.org>
Fri, 22 Jun 2007 10:16:47 +0000 (10:16 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Fri, 22 Jun 2007 10:16:47 +0000 (10:16 +0000)
SVN-Revision: 7708

target/linux/adm5120-2.6/config/default
target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig [new file with mode: 0644]
target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c
target/linux/adm5120-2.6/patches/001-adm5120.patch
target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch [new file with mode: 0644]
target/linux/adm5120eb-2.6/config/default

index 0ea8e56e8b05babe9eadc3a238f507811d27a8bf..569f66c9b889e678c5c18632d313e4f9705711af 100644 (file)
@@ -2,6 +2,7 @@ CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_ADM5120_GPIO=y
+CONFIG_ADM5120_HARDWARE_SWAB=y
 CONFIG_ADM5120_NR_UARTS=2
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig
new file mode 100644 (file)
index 0000000..1b73a37
--- /dev/null
@@ -0,0 +1,16 @@
+if MIPS_ADM5120
+
+menu "ADM5120 Implementation Options"
+
+config PCI_ADM5120
+       bool "Enable PCI support"
+       select PCI
+       default y
+
+config ADM5120_HARDWARE_SWAB
+       bool "Enable hardware accelerated byte-swapping"
+       default y
+
+endmenu
+
+endif
index ab96b0f6c92cd6591986d18caf12c03088ca2ef2..fea52ffca04fbced5130f2a5f4249bc14537bfee 100644 (file)
@@ -18,6 +18,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
+#include <asm/byteorder.h>
 
 #include <asm/mach-adm5120/adm5120_defs.h>
 #include <asm/mach-adm5120/adm5120_switch.h>
@@ -775,7 +776,7 @@ static void __init adm5120_detect_memsize(void)
        u32     size, maxsize;
        volatile u8     *p,*r;
        u8      t;
-       
+
        memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
        switch (memctrl & MEMCTRL_SDRS_MASK) {
        case MEMCTRL_SDRS_4M:
@@ -791,7 +792,7 @@ static void __init adm5120_detect_memsize(void)
                maxsize = 64 << 20;
                break;
        }
-       
+
        /* FIXME: need to disable buffers for both SDRAM bank? */
 
        mem_dbg("checking for %ldMB chip\n",maxsize >> 20);
@@ -800,7 +801,7 @@ static void __init adm5120_detect_memsize(void)
        p = (volatile u8 *)KSEG1ADDR(0);
        t = *p;
        for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-#if 1  
+#if 1
                r = (p+size);
                *p = 0x55;
                mem_dbg("1st pattern at 0x%lx is 0x%02x\n", size, *r);
@@ -818,7 +819,7 @@ static void __init adm5120_detect_memsize(void)
                mem_dbg("1st pattern at 0x%lx is 0x%02x\n", size, p[size]);
                if (p[size] != 0x55)
                        continue;
-                       
+
                p[0] = 0xAA;
                mem_dbg("2nd pattern at 0x%lx is 0x%02x\n", size, p[size]);
                if (p[size] != 0xAA)
@@ -836,13 +837,13 @@ static void __init adm5120_detect_memsize(void)
        if (size == (32 << 20))
                /* if bank size is 32MB, 2nd bank is not supported */
                goto out;
-               
+
        if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
                /* if 2nd bank is not enabled, we are done */
                goto out;
-               
+
        /*
-        * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip 
+        * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
         * are missing.
         */
        mem_dbg("checking second bank\n");
@@ -851,11 +852,11 @@ static void __init adm5120_detect_memsize(void)
        *p = 0x55;
        if (*p != 0x55)
                goto out;
-               
+
        *p = 0xAA;
        if (*p != 0xAA)
                goto out;
-               
+
        *p = t;
        if (maxsize != size) {
                /* adjusting MECTRL register */
@@ -897,11 +898,31 @@ void __init adm5120_info_show(void)
        printk("Memory size   : %ldMB\n", adm5120_memsize >> 20);
 }
 
+void __init adm5120_swab_test(void)
+{
+#if CONFIG_ADM5120_HARDWARE_SWAB
+       u32     t1,t2;
+
+       t1 = 0x1234;
+       t2 = swab16(t1);
+       printk("hardware swab16 test %s, data:0x%04X, result:0x%04X\n",
+               (t2 == 0x3412) ? "passed" :"failed", t1, t2);
+
+       t1 = 0x12345678;
+       t2 = swab32(t1);
+       printk("hardware swab32 test %s, data:0x%08X, result:0x%08X\n",
+               (t2 == 0x78563412) ? "passed" :"failed", t1, t2);
+
+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
+}
+
 void __init adm5120_info_init(void)
 {
+
        adm5120_detect_cpuinfo();
        adm5120_detect_memsize();
        adm5120_detect_board();
 
        adm5120_info_show();
+       adm5120_swab_test();
 }
index 8cc60678e02f8fcb846c68d08ce38ada52a67ef5..c14dde345aab3b4a00185c1db26be6b3a0963b9f 100644 (file)
@@ -2,7 +2,7 @@ Index: linux-2.6.21.1/arch/mips/Kconfig
 ===================================================================
 --- linux-2.6.21.1.orig/arch/mips/Kconfig
 +++ linux-2.6.21.1/arch/mips/Kconfig
-@@ -16,6 +16,21 @@ choice
+@@ -16,6 +16,17 @@ choice
        prompt "System type"
        default SGI_IP22
  
@@ -16,14 +16,18 @@ Index: linux-2.6.21.1/arch/mips/Kconfig
 +      select SYS_SUPPORTS_BIG_ENDIAN
 +      select SYS_SUPPORTS_32BIT_KERNEL
 +      select GENERIC_GPIO
-+
-+config PCI_ADM5120
-+      bool "Add PCI control support for ADM5120"
-+      depends on MIPS_ADM5120 && PCI
 +
  config MIPS_MTX1
        bool "4G Systems MTX-1 board"
        select DMA_NONCOHERENT
+@@ -766,6 +775,7 @@
+ endchoice
++source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
 Index: linux-2.6.21.1/arch/mips/Makefile
 ===================================================================
 --- linux-2.6.21.1.orig/arch/mips/Makefile
diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
new file mode 100644 (file)
index 0000000..a71dba2
--- /dev/null
@@ -0,0 +1,38 @@
+--- linux-2.6.19.2/include/asm-mips/byteorder.h        2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/include/asm-mips/byteorder.h    2007-05-16 21:14:47.000000000 +0200
+@@ -58,6 +58,35 @@
+ #endif /* CONFIG_CPU_MIPSR2 */
++#ifdef CONFIG_ADM5120_HARDWARE_SWAB
++
++static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
++{
++      __asm__ (
++      "       sw      %2, 0xC8(%1)                    \n"
++      "       lhu     %0, 0xCC(%1)                    \n"
++      : "=r" (x)
++      : "r" (0xB2000000), "r" (x));
++
++      return x;
++}
++
++static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
++{
++      __asm__ (
++      "       sw      %2, 0xC8(%1)                    \n"
++      "       lw      %0, 0xCC(%1)                    \n"
++      : "=r" (x)
++      : "r" (0xB2000000), "r" (x));
++
++      return x;
++}
++
++#define __arch__swab16(x)     ___adm5120__swab16(x)
++#define __arch__swab32(x)     ___adm5120__swab32(x)
++
++#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
++
+ #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+ #  define __BYTEORDER_HAS_U64__
+ #  define __SWAB_64_THRU_32__
index 519b83f428b02378ee69c91a78872be7fa3f73b6..b77bebb60d93847d0c4613f4b309a0b95b0693ea 100644 (file)
@@ -2,6 +2,7 @@ CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_ADM5120_GPIO=y
+CONFIG_ADM5120_HARDWARE_SWAB=y
 CONFIG_ADM5120_NR_UARTS=2
 # CONFIG_ATM_DRIVERS is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set