mac80211: brcmfmac: backport scheduled scan cleanup and chip support
authorRafał Miłecki <rafal@milecki.pl>
Thu, 2 Feb 2017 08:27:20 +0000 (09:27 +0100)
committerRafał Miłecki <rafal@milecki.pl>
Thu, 2 Feb 2017 08:49:35 +0000 (09:49 +0100)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
18 files changed:
package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch [new file with mode: 0644]
package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch [new file with mode: 0644]
package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch
package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch
package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch
package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch
package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch

diff --git a/package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch b/package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch
new file mode 100644 (file)
index 0000000..e093913
--- /dev/null
@@ -0,0 +1,490 @@
+From be4b092cab84b2ecc01ee7f4da6a044279430b6f Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:20 +0000
+Subject: [PATCH] brcmfmac: add pcie host dongle interface rev6 support
+
+In rev6 of pcie host dongle interface protocol, host needs to maximum
+supported ring number from dongle shared memory and set up ring buffer
+and ring indices offset accordingly.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h |  10 +-
+ .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c  |  38 +++--
+ .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.h  |   4 +
+ .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 171 ++++++++++++---------
+ 4 files changed, 132 insertions(+), 91 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -22,10 +22,12 @@
+ /* IDs of the 6 default common rings of msgbuf protocol */
+ #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT      0
+ #define BRCMF_H2D_MSGRING_RXPOST_SUBMIT               1
++#define BRCMF_H2D_MSGRING_FLOWRING_IDSTART    2
+ #define BRCMF_D2H_MSGRING_CONTROL_COMPLETE    2
+ #define BRCMF_D2H_MSGRING_TX_COMPLETE         3
+ #define BRCMF_D2H_MSGRING_RX_COMPLETE         4
++
+ #define BRCMF_NROF_H2D_COMMON_MSGRINGS                2
+ #define BRCMF_NROF_D2H_COMMON_MSGRINGS                3
+ #define BRCMF_NROF_COMMON_MSGRINGS    (BRCMF_NROF_H2D_COMMON_MSGRINGS + \
+@@ -95,14 +97,18 @@ struct brcmf_bus_ops {
+  * @flowrings: commonrings which are dynamically created and destroyed for data.
+  * @rx_dataoffset: if set then all rx data has this this offset.
+  * @max_rxbufpost: maximum number of buffers to post for rx.
+- * @nrof_flowrings: number of flowrings.
++ * @max_flowrings: maximum number of tx flow rings supported.
++ * @max_submissionrings: maximum number of submission rings(h2d) supported.
++ * @max_completionrings: maximum number of completion rings(d2h) supported.
+  */
+ struct brcmf_bus_msgbuf {
+       struct brcmf_commonring *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
+       struct brcmf_commonring **flowrings;
+       u32 rx_dataoffset;
+       u32 max_rxbufpost;
+-      u32 nrof_flowrings;
++      u16 max_flowrings;
++      u16 max_submissionrings;
++      u16 max_completionrings;
+ };
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+@@ -87,11 +87,6 @@ struct msgbuf_common_hdr {
+       __le32                          request_id;
+ };
+-struct msgbuf_buf_addr {
+-      __le32                          low_addr;
+-      __le32                          high_addr;
+-};
+-
+ struct msgbuf_ioctl_req_hdr {
+       struct msgbuf_common_hdr        msg;
+       __le32                          cmd;
+@@ -227,7 +222,10 @@ struct brcmf_msgbuf {
+       struct brcmf_commonring **commonrings;
+       struct brcmf_commonring **flowrings;
+       dma_addr_t *flowring_dma_handle;
+-      u16 nrof_flowrings;
++
++      u16 max_flowrings;
++      u16 max_submissionrings;
++      u16 max_completionrings;
+       u16 rx_dataoffset;
+       u32 max_rxbufpost;
+@@ -610,7 +608,7 @@ brcmf_msgbuf_flowring_create_worker(stru
+       create->msg.request_id = 0;
+       create->tid = brcmf_flowring_tid(msgbuf->flow, flowid);
+       create->flow_ring_id = cpu_to_le16(flowid +
+-                                         BRCMF_NROF_H2D_COMMON_MSGRINGS);
++                                         BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
+       memcpy(create->sa, work->sa, ETH_ALEN);
+       memcpy(create->da, work->da, ETH_ALEN);
+       address = (u64)msgbuf->flowring_dma_handle[flowid];
+@@ -760,7 +758,7 @@ static void brcmf_msgbuf_txflow_worker(s
+       u32 flowid;
+       msgbuf = container_of(worker, struct brcmf_msgbuf, txflow_work);
+-      for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->nrof_flowrings) {
++      for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->max_flowrings) {
+               clear_bit(flowid, msgbuf->flow_map);
+               brcmf_msgbuf_txflow(msgbuf, flowid);
+       }
+@@ -866,7 +864,7 @@ brcmf_msgbuf_process_txstatus(struct brc
+       tx_status = (struct msgbuf_tx_status *)buf;
+       idx = le32_to_cpu(tx_status->msg.request_id);
+       flowid = le16_to_cpu(tx_status->compl_hdr.flow_ring_id);
+-      flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++      flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+       skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
+                                    msgbuf->tx_pktids, idx);
+       if (!skb)
+@@ -1174,7 +1172,7 @@ brcmf_msgbuf_process_flow_ring_create_re
+       flowring_create_resp = (struct msgbuf_flowring_create_resp *)buf;
+       flowid = le16_to_cpu(flowring_create_resp->compl_hdr.flow_ring_id);
+-      flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++      flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+       status =  le16_to_cpu(flowring_create_resp->compl_hdr.status);
+       if (status) {
+@@ -1202,7 +1200,7 @@ brcmf_msgbuf_process_flow_ring_delete_re
+       flowring_delete_resp = (struct msgbuf_flowring_delete_resp *)buf;
+       flowid = le16_to_cpu(flowring_delete_resp->compl_hdr.flow_ring_id);
+-      flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++      flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+       status =  le16_to_cpu(flowring_delete_resp->compl_hdr.status);
+       if (status) {
+@@ -1307,7 +1305,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct
+       brcmf_msgbuf_process_rx(msgbuf, buf);
+       for_each_set_bit(flowid, msgbuf->txstatus_done_map,
+-                       msgbuf->nrof_flowrings) {
++                       msgbuf->max_flowrings) {
+               clear_bit(flowid, msgbuf->txstatus_done_map);
+               commonring = msgbuf->flowrings[flowid];
+               qlen = brcmf_flowring_qlen(msgbuf->flow, flowid);
+@@ -1349,7 +1347,7 @@ void brcmf_msgbuf_delete_flowring(struct
+       delete->msg.request_id = 0;
+       delete->flow_ring_id = cpu_to_le16(flowid +
+-                                         BRCMF_NROF_H2D_COMMON_MSGRINGS);
++                                         BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
+       delete->reason = 0;
+       brcmf_dbg(MSGBUF, "Send Flow Delete Req flow ID %d, ifindex %d\n",
+@@ -1427,10 +1425,10 @@ int brcmf_proto_msgbuf_attach(struct brc
+       if_msgbuf = drvr->bus_if->msgbuf;
+-      if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
++      if (if_msgbuf->max_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
+               brcmf_err("driver not configured for this many flowrings %d\n",
+-                        if_msgbuf->nrof_flowrings);
+-              if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
++                        if_msgbuf->max_flowrings);
++              if_msgbuf->max_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
+       }
+       msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL);
+@@ -1443,7 +1441,7 @@ int brcmf_proto_msgbuf_attach(struct brc
+               goto fail;
+       }
+       INIT_WORK(&msgbuf->txflow_work, brcmf_msgbuf_txflow_worker);
+-      count = BITS_TO_LONGS(if_msgbuf->nrof_flowrings);
++      count = BITS_TO_LONGS(if_msgbuf->max_flowrings);
+       count = count * sizeof(unsigned long);
+       msgbuf->flow_map = kzalloc(count, GFP_KERNEL);
+       if (!msgbuf->flow_map)
+@@ -1479,8 +1477,8 @@ int brcmf_proto_msgbuf_attach(struct brc
+       msgbuf->commonrings =
+               (struct brcmf_commonring **)if_msgbuf->commonrings;
+       msgbuf->flowrings = (struct brcmf_commonring **)if_msgbuf->flowrings;
+-      msgbuf->nrof_flowrings = if_msgbuf->nrof_flowrings;
+-      msgbuf->flowring_dma_handle = kzalloc(msgbuf->nrof_flowrings *
++      msgbuf->max_flowrings = if_msgbuf->max_flowrings;
++      msgbuf->flowring_dma_handle = kzalloc(msgbuf->max_flowrings *
+               sizeof(*msgbuf->flowring_dma_handle), GFP_KERNEL);
+       if (!msgbuf->flowring_dma_handle)
+               goto fail;
+@@ -1501,7 +1499,7 @@ int brcmf_proto_msgbuf_attach(struct brc
+               goto fail;
+       msgbuf->flow = brcmf_flowring_attach(drvr->bus_if->dev,
+-                                           if_msgbuf->nrof_flowrings);
++                                           if_msgbuf->max_flowrings);
+       if (!msgbuf->flow)
+               goto fail;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
+@@ -31,6 +31,10 @@
+ #define BRCMF_D2H_MSGRING_RX_COMPLETE_ITEMSIZE                32
+ #define BRCMF_H2D_TXFLOWRING_ITEMSIZE                 48
++struct msgbuf_buf_addr {
++      __le32          low_addr;
++      __le32          high_addr;
++};
+ int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+ void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -135,7 +135,7 @@ static struct brcmf_firmware_mapping brc
+                                                BRCMF_PCIE_MB_INT_D2H3_DB1)
+ #define BRCMF_PCIE_MIN_SHARED_VERSION         5
+-#define BRCMF_PCIE_MAX_SHARED_VERSION         5
++#define BRCMF_PCIE_MAX_SHARED_VERSION         6
+ #define BRCMF_PCIE_SHARED_VERSION_MASK                0x00FF
+ #define BRCMF_PCIE_SHARED_DMA_INDEX           0x10000
+ #define BRCMF_PCIE_SHARED_DMA_2B_IDX          0x100000
+@@ -166,17 +166,6 @@ static struct brcmf_firmware_mapping brc
+ #define BRCMF_RING_MEM_SZ                     16
+ #define BRCMF_RING_STATE_SZ                   8
+-#define BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET        4
+-#define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET        8
+-#define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET        12
+-#define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET        16
+-#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET 20
+-#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET 28
+-#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET 36
+-#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET 44
+-#define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET   0
+-#define BRCMF_SHARED_RING_MAX_SUB_QUEUES      52
+-
+ #define BRCMF_DEF_MAX_RXBUFPOST                       255
+ #define BRCMF_CONSOLE_BUFADDR_OFFSET          8
+@@ -231,7 +220,9 @@ struct brcmf_pcie_shared_info {
+       struct brcmf_pcie_ringbuf *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
+       struct brcmf_pcie_ringbuf *flowrings;
+       u16 max_rxbufpost;
+-      u32 nrof_flowrings;
++      u16 max_flowrings;
++      u16 max_submissionrings;
++      u16 max_completionrings;
+       u32 rx_dataoffset;
+       u32 htod_mb_data_addr;
+       u32 dtoh_mb_data_addr;
+@@ -241,6 +232,7 @@ struct brcmf_pcie_shared_info {
+       dma_addr_t scratch_dmahandle;
+       void *ringupd;
+       dma_addr_t ringupd_dmahandle;
++      u8 version;
+ };
+ struct brcmf_pcie_core_info {
+@@ -284,6 +276,36 @@ struct brcmf_pcie_ringbuf {
+       u8 id;
+ };
++/**
++ * struct brcmf_pcie_dhi_ringinfo - dongle/host interface shared ring info
++ *
++ * @ringmem: dongle memory pointer to ring memory location
++ * @h2d_w_idx_ptr: h2d ring write indices dongle memory pointers
++ * @h2d_r_idx_ptr: h2d ring read indices dongle memory pointers
++ * @d2h_w_idx_ptr: d2h ring write indices dongle memory pointers
++ * @d2h_r_idx_ptr: d2h ring read indices dongle memory pointers
++ * @h2d_w_idx_hostaddr: h2d ring write indices host memory pointers
++ * @h2d_r_idx_hostaddr: h2d ring read indices host memory pointers
++ * @d2h_w_idx_hostaddr: d2h ring write indices host memory pointers
++ * @d2h_r_idx_hostaddr: d2h ring reaD indices host memory pointers
++ * @max_flowrings: maximum number of tx flow rings supported.
++ * @max_submissionrings: maximum number of submission rings(h2d) supported.
++ * @max_completionrings: maximum number of completion rings(d2h) supported.
++ */
++struct brcmf_pcie_dhi_ringinfo {
++      __le32                  ringmem;
++      __le32                  h2d_w_idx_ptr;
++      __le32                  h2d_r_idx_ptr;
++      __le32                  d2h_w_idx_ptr;
++      __le32                  d2h_r_idx_ptr;
++      struct msgbuf_buf_addr  h2d_w_idx_hostaddr;
++      struct msgbuf_buf_addr  h2d_r_idx_hostaddr;
++      struct msgbuf_buf_addr  d2h_w_idx_hostaddr;
++      struct msgbuf_buf_addr  d2h_r_idx_hostaddr;
++      __le16                  max_flowrings;
++      __le16                  max_submissionrings;
++      __le16                  max_completionrings;
++};
+ static const u32 brcmf_ring_max_item[BRCMF_NROF_COMMON_MSGRINGS] = {
+       BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM,
+@@ -1054,26 +1076,35 @@ static int brcmf_pcie_init_ringbuffers(s
+ {
+       struct brcmf_pcie_ringbuf *ring;
+       struct brcmf_pcie_ringbuf *rings;
+-      u32 ring_addr;
+       u32 d2h_w_idx_ptr;
+       u32 d2h_r_idx_ptr;
+       u32 h2d_w_idx_ptr;
+       u32 h2d_r_idx_ptr;
+-      u32 addr;
+       u32 ring_mem_ptr;
+       u32 i;
+       u64 address;
+       u32 bufsz;
+-      u16 max_sub_queues;
+       u8 idx_offset;
+-
+-      ring_addr = devinfo->shared.ring_info_addr;
+-      brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
+-      addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
+-      max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
++      struct brcmf_pcie_dhi_ringinfo ringinfo;
++      u16 max_flowrings;
++      u16 max_submissionrings;
++      u16 max_completionrings;
++
++      memcpy_fromio(&ringinfo, devinfo->tcm + devinfo->shared.ring_info_addr,
++                    sizeof(ringinfo));
++      if (devinfo->shared.version >= 6) {
++              max_submissionrings = le16_to_cpu(ringinfo.max_submissionrings);
++              max_flowrings = le16_to_cpu(ringinfo.max_flowrings);
++              max_completionrings = le16_to_cpu(ringinfo.max_completionrings);
++      } else {
++              max_submissionrings = le16_to_cpu(ringinfo.max_flowrings);
++              max_flowrings = max_submissionrings -
++                              BRCMF_NROF_H2D_COMMON_MSGRINGS;
++              max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
++      }
+       if (devinfo->dma_idx_sz != 0) {
+-              bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
++              bufsz = (max_submissionrings + max_completionrings) *
+                       devinfo->dma_idx_sz * 2;
+               devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
+                                                    &devinfo->idxbuf_dmahandle,
+@@ -1083,14 +1114,10 @@ static int brcmf_pcie_init_ringbuffers(s
+       }
+       if (devinfo->dma_idx_sz == 0) {
+-              addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
+-              d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+-              addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
+-              d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+-              addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
+-              h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+-              addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
+-              h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
++              d2h_w_idx_ptr = le32_to_cpu(ringinfo.d2h_w_idx_ptr);
++              d2h_r_idx_ptr = le32_to_cpu(ringinfo.d2h_r_idx_ptr);
++              h2d_w_idx_ptr = le32_to_cpu(ringinfo.h2d_w_idx_ptr);
++              h2d_r_idx_ptr = le32_to_cpu(ringinfo.h2d_r_idx_ptr);
+               idx_offset = sizeof(u32);
+               devinfo->write_ptr = brcmf_pcie_write_tcm16;
+               devinfo->read_ptr = brcmf_pcie_read_tcm16;
+@@ -1103,34 +1130,42 @@ static int brcmf_pcie_init_ringbuffers(s
+               devinfo->read_ptr = brcmf_pcie_read_idx;
+               h2d_w_idx_ptr = 0;
+-              addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
+               address = (u64)devinfo->idxbuf_dmahandle;
+-              brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+-              brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+-
+-              h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
+-              addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
+-              address += max_sub_queues * idx_offset;
+-              brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+-              brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+-
+-              d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
+-              addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
+-              address += max_sub_queues * idx_offset;
+-              brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+-              brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
++              ringinfo.h2d_w_idx_hostaddr.low_addr =
++                      cpu_to_le32(address & 0xffffffff);
++              ringinfo.h2d_w_idx_hostaddr.high_addr =
++                      cpu_to_le32(address >> 32);
++
++              h2d_r_idx_ptr = h2d_w_idx_ptr +
++                              max_submissionrings * idx_offset;
++              address += max_submissionrings * idx_offset;
++              ringinfo.h2d_r_idx_hostaddr.low_addr =
++                      cpu_to_le32(address & 0xffffffff);
++              ringinfo.h2d_r_idx_hostaddr.high_addr =
++                      cpu_to_le32(address >> 32);
++
++              d2h_w_idx_ptr = h2d_r_idx_ptr +
++                              max_submissionrings * idx_offset;
++              address += max_submissionrings * idx_offset;
++              ringinfo.d2h_w_idx_hostaddr.low_addr =
++                      cpu_to_le32(address & 0xffffffff);
++              ringinfo.d2h_w_idx_hostaddr.high_addr =
++                      cpu_to_le32(address >> 32);
+               d2h_r_idx_ptr = d2h_w_idx_ptr +
+-                              BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
+-              addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
+-              address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
+-              brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+-              brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
++                              max_completionrings * idx_offset;
++              address += max_completionrings * idx_offset;
++              ringinfo.d2h_r_idx_hostaddr.low_addr =
++                      cpu_to_le32(address & 0xffffffff);
++              ringinfo.d2h_r_idx_hostaddr.high_addr =
++                      cpu_to_le32(address >> 32);
++
++              memcpy_toio(devinfo->tcm + devinfo->shared.ring_info_addr,
++                          &ringinfo, sizeof(ringinfo));
+               brcmf_dbg(PCIE, "Using host memory indices\n");
+       }
+-      addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
+-      ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
++      ring_mem_ptr = le32_to_cpu(ringinfo.ringmem);
+       for (i = 0; i < BRCMF_NROF_H2D_COMMON_MSGRINGS; i++) {
+               ring = brcmf_pcie_alloc_dma_and_ring(devinfo, i, ring_mem_ptr);
+@@ -1161,20 +1196,19 @@ static int brcmf_pcie_init_ringbuffers(s
+               ring_mem_ptr += BRCMF_RING_MEM_SZ;
+       }
+-      devinfo->shared.nrof_flowrings =
+-                      max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
+-      rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
+-                      GFP_KERNEL);
++      devinfo->shared.max_flowrings = max_flowrings;
++      devinfo->shared.max_submissionrings = max_submissionrings;
++      devinfo->shared.max_completionrings = max_completionrings;
++      rings = kcalloc(max_flowrings, sizeof(*ring), GFP_KERNEL);
+       if (!rings)
+               goto fail;
+-      brcmf_dbg(PCIE, "Nr of flowrings is %d\n",
+-                devinfo->shared.nrof_flowrings);
++      brcmf_dbg(PCIE, "Nr of flowrings is %d\n", max_flowrings);
+-      for (i = 0; i < devinfo->shared.nrof_flowrings; i++) {
++      for (i = 0; i < max_flowrings; i++) {
+               ring = &rings[i];
+               ring->devinfo = devinfo;
+-              ring->id = i + BRCMF_NROF_COMMON_MSGRINGS;
++              ring->id = i + BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+               brcmf_commonring_register_cb(&ring->commonring,
+                                            brcmf_pcie_ring_mb_ring_bell,
+                                            brcmf_pcie_ring_mb_update_rptr,
+@@ -1357,17 +1391,16 @@ brcmf_pcie_init_share_ram_info(struct br
+ {
+       struct brcmf_pcie_shared_info *shared;
+       u32 addr;
+-      u32 version;
+       shared = &devinfo->shared;
+       shared->tcm_base_address = sharedram_addr;
+       shared->flags = brcmf_pcie_read_tcm32(devinfo, sharedram_addr);
+-      version = shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK;
+-      brcmf_dbg(PCIE, "PCIe protocol version %d\n", version);
+-      if ((version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
+-          (version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
+-              brcmf_err("Unsupported PCIE version %d\n", version);
++      shared->version = (u8)(shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK);
++      brcmf_dbg(PCIE, "PCIe protocol version %d\n", shared->version);
++      if ((shared->version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
++          (shared->version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
++              brcmf_err("Unsupported PCIE version %d\n", shared->version);
+               return -EINVAL;
+       }
+@@ -1661,18 +1694,18 @@ static void brcmf_pcie_setup(struct devi
+               bus->msgbuf->commonrings[i] =
+                               &devinfo->shared.commonrings[i]->commonring;
+-      flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
++      flowrings = kcalloc(devinfo->shared.max_flowrings, sizeof(*flowrings),
+                           GFP_KERNEL);
+       if (!flowrings)
+               goto fail;
+-      for (i = 0; i < devinfo->shared.nrof_flowrings; i++)
++      for (i = 0; i < devinfo->shared.max_flowrings; i++)
+               flowrings[i] = &devinfo->shared.flowrings[i].commonring;
+       bus->msgbuf->flowrings = flowrings;
+       bus->msgbuf->rx_dataoffset = devinfo->shared.rx_dataoffset;
+       bus->msgbuf->max_rxbufpost = devinfo->shared.max_rxbufpost;
+-      bus->msgbuf->nrof_flowrings = devinfo->shared.nrof_flowrings;
++      bus->msgbuf->max_flowrings = devinfo->shared.max_flowrings;
+       init_waitqueue_head(&devinfo->mbdata_resp_wait);
diff --git a/package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch b/package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch
new file mode 100644 (file)
index 0000000..edd7de3
--- /dev/null
@@ -0,0 +1,39 @@
+From dc630dc5c753ccba97ce174f9c2894f802f9bd93 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:21 +0000
+Subject: [PATCH] brcmfmac: add support for 43341 chip
+
+This chip was already supported, but seems a device came up giving
+a different chip identifier. So adding that effectively mapping to
+the same firmware file as for 43340 chip.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c       | 1 +
+ drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -621,6 +621,7 @@ static struct brcmf_firmware_mapping brc
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
++      BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
+       BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
+--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
++++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+@@ -36,6 +36,7 @@
+ #define BRCM_CC_4330_CHIP_ID          0x4330
+ #define BRCM_CC_4334_CHIP_ID          0x4334
+ #define BRCM_CC_43340_CHIP_ID         43340
++#define BRCM_CC_43341_CHIP_ID         43341
+ #define BRCM_CC_43362_CHIP_ID         43362
+ #define BRCM_CC_4335_CHIP_ID          0x4335
+ #define BRCM_CC_4339_CHIP_ID          0x4339
diff --git a/package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch b/package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch
new file mode 100644 (file)
index 0000000..94f2e6b
--- /dev/null
@@ -0,0 +1,319 @@
+From ac55136f43d3336c7b40238b779c404008229929 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:22 +0000
+Subject: [PATCH] brcmfmac: move pno helper functions in separate source file
+
+Introducing new source file for pno related functionality. Moving
+existing pno functions.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/Makefile  |   3 +-
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  93 ++-----------------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 100 +++++++++++++++++++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h |  40 +++++++++
+ 4 files changed, 150 insertions(+), 86 deletions(-)
+ create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+ create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
+@@ -35,7 +35,8 @@ brcmfmac-objs += \
+               firmware.o \
+               feature.o \
+               btcoex.o \
+-              vendor.o
++              vendor.o \
++              pno.o
+ brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_BCDC) += \
+               bcdc.o
+ brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_MSGBUF) += \
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -32,6 +32,7 @@
+ #include "fwil_types.h"
+ #include "p2p.h"
+ #include "btcoex.h"
++#include "pno.h"
+ #include "cfg80211.h"
+ #include "feature.h"
+ #include "fwil.h"
+@@ -41,16 +42,6 @@
+ #include "common.h"
+ #define BRCMF_SCAN_IE_LEN_MAX         2048
+-#define BRCMF_PNO_VERSION             2
+-#define BRCMF_PNO_TIME                        30
+-#define BRCMF_PNO_REPEAT              4
+-#define BRCMF_PNO_FREQ_EXPO_MAX               3
+-#define BRCMF_PNO_MAX_PFN_COUNT               16
+-#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT        6
+-#define BRCMF_PNO_HIDDEN_BIT          2
+-#define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
+-#define BRCMF_PNO_SCAN_COMPLETE               1
+-#define BRCMF_PNO_SCAN_INCOMPLETE     0
+ #define WPA_OUI                               "\x00\x50\xF2"  /* WPA OUI */
+ #define WPA_OUI_TYPE                  1
+@@ -3323,76 +3314,6 @@ out_err:
+       return err;
+ }
+-static int brcmf_dev_pno_clean(struct net_device *ndev)
+-{
+-      int ret;
+-
+-      /* Disable pfn */
+-      ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "pfn", 0);
+-      if (ret == 0) {
+-              /* clear pfn */
+-              ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "pfnclear",
+-                                             NULL, 0);
+-      }
+-      if (ret < 0)
+-              brcmf_err("failed code %d\n", ret);
+-
+-      return ret;
+-}
+-
+-static int brcmf_dev_pno_config(struct brcmf_if *ifp,
+-                              struct cfg80211_sched_scan_request *request)
+-{
+-      struct brcmf_pno_param_le pfn_param;
+-      struct brcmf_pno_macaddr_le pfn_mac;
+-      s32 err;
+-      u8 *mac_mask;
+-      int i;
+-
+-      memset(&pfn_param, 0, sizeof(pfn_param));
+-      pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
+-
+-      /* set extra pno params */
+-      pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+-      pfn_param.repeat = BRCMF_PNO_REPEAT;
+-      pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+-
+-      /* set up pno scan fr */
+-      pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
+-
+-      err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
+-                                     sizeof(pfn_param));
+-      if (err) {
+-              brcmf_err("pfn_set failed, err=%d\n", err);
+-              return err;
+-      }
+-
+-      /* Find out if mac randomization should be turned on */
+-      if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
+-              return 0;
+-
+-      pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+-      pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
+-
+-      memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
+-      mac_mask = request->mac_addr_mask;
+-      for (i = 0; i < ETH_ALEN; i++) {
+-              pfn_mac.mac[i] &= mac_mask[i];
+-              pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
+-      }
+-      /* Clear multi bit */
+-      pfn_mac.mac[0] &= 0xFE;
+-      /* Set locally administered */
+-      pfn_mac.mac[0] |= 0x02;
+-
+-      err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
+-                                     sizeof(pfn_mac));
+-      if (err)
+-              brcmf_err("pfn_macaddr failed, err=%d\n", err);
+-
+-      return err;
+-}
+-
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+                               struct net_device *ndev,
+@@ -3436,15 +3357,16 @@ brcmf_cfg80211_sched_scan_start(struct w
+       if (request->n_match_sets > 0) {
+               /* clean up everything */
+-              ret = brcmf_dev_pno_clean(ndev);
++              ret = brcmf_pno_clean(ifp);
+               if  (ret < 0) {
+                       brcmf_err("failed error=%d\n", ret);
+                       return ret;
+               }
+               /* configure pno */
+-              if (brcmf_dev_pno_config(ifp, request))
+-                      return -EINVAL;
++              ret = brcmf_pno_config(ifp, request);
++              if (ret < 0)
++                      return ret;
+               /* configure each match set */
+               for (i = 0; i < request->n_match_sets; i++) {
+@@ -3486,11 +3408,12 @@ static int brcmf_cfg80211_sched_scan_sto
+                                         struct net_device *ndev)
+ {
+       struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
++      struct brcmf_if *ifp = netdev_priv(ndev);
+       brcmf_dbg(SCAN, "enter\n");
+-      brcmf_dev_pno_clean(ndev);
++      brcmf_pno_clean(ifp);
+       if (cfg->sched_escan)
+-              brcmf_notify_escan_complete(cfg, netdev_priv(ndev), true, true);
++              brcmf_notify_escan_complete(cfg, ifp, true, true);
+       return 0;
+ }
+--- /dev/null
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -0,0 +1,100 @@
++/*
++ * Copyright (c) 2016 Broadcom
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#include <linux/netdevice.h>
++#include <net/cfg80211.h>
++
++#include "core.h"
++#include "debug.h"
++#include "pno.h"
++#include "fwil.h"
++#include "fwil_types.h"
++
++#define BRCMF_PNO_VERSION             2
++#define BRCMF_PNO_TIME                        30
++#define BRCMF_PNO_REPEAT              4
++#define BRCMF_PNO_FREQ_EXPO_MAX               3
++#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT        6
++#define BRCMF_PNO_SCAN_INCOMPLETE     0
++
++int brcmf_pno_clean(struct brcmf_if *ifp)
++{
++      int ret;
++
++      /* Disable pfn */
++      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
++      if (ret == 0) {
++              /* clear pfn */
++              ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
++      }
++      if (ret < 0)
++              brcmf_err("failed code %d\n", ret);
++
++      return ret;
++}
++
++int brcmf_pno_config(struct brcmf_if *ifp,
++                   struct cfg80211_sched_scan_request *request)
++{
++      struct brcmf_pno_param_le pfn_param;
++      struct brcmf_pno_macaddr_le pfn_mac;
++      s32 err;
++      u8 *mac_mask;
++      int i;
++
++      memset(&pfn_param, 0, sizeof(pfn_param));
++      pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
++
++      /* set extra pno params */
++      pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
++      pfn_param.repeat = BRCMF_PNO_REPEAT;
++      pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
++
++      /* set up pno scan fr */
++      pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
++
++      err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
++                                     sizeof(pfn_param));
++      if (err) {
++              brcmf_err("pfn_set failed, err=%d\n", err);
++              return err;
++      }
++
++      /* Find out if mac randomization should be turned on */
++      if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
++              return 0;
++
++      pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
++      pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
++
++      memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
++      mac_mask = request->mac_addr_mask;
++      for (i = 0; i < ETH_ALEN; i++) {
++              pfn_mac.mac[i] &= mac_mask[i];
++              pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
++      }
++      /* Clear multi bit */
++      pfn_mac.mac[0] &= 0xFE;
++      /* Set locally administered */
++      pfn_mac.mac[0] |= 0x02;
++
++      err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
++                                     sizeof(pfn_mac));
++      if (err)
++              brcmf_err("pfn_macaddr failed, err=%d\n", err);
++
++      return err;
++}
++
+--- /dev/null
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (c) 2016 Broadcom
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#ifndef _BRCMF_PNO_H
++#define _BRCMF_PNO_H
++
++#define BRCMF_PNO_SCAN_COMPLETE               1
++#define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
++#define BRCMF_PNO_HIDDEN_BIT          2
++#define BRCMF_PNO_MAX_PFN_COUNT               16
++
++/**
++ * brcmf_pno_clean - disable and clear pno in firmware.
++ *
++ * @ifp: interface object used.
++ */
++int brcmf_pno_clean(struct brcmf_if *ifp);
++
++/**
++ * brcmf_pno_config - configure pno parameters.
++ *
++ * @ifp: interface object used.
++ * @request: scheduled scan parameters.
++ */
++int brcmf_pno_config(struct brcmf_if *ifp,
++                   struct cfg80211_sched_scan_request *request);
++
++#endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch b/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch
new file mode 100644 (file)
index 0000000..f1934af
--- /dev/null
@@ -0,0 +1,221 @@
+From 3e2e86ab19c2a43953de30089c5411c580ddb5f7 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:23 +0000
+Subject: [PATCH] brcmfmac: fix handling ssids in .sched_scan_start() callback
+
+The ssids list in the scheduled scan request were not properly taken
+into account when configuring in firmware. The hidden bit was set for
+any ssid resulting in active scanning for all. Only set it for ssids
+that are in the ssids list.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 103 ++++++++++-----------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c |  18 ++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h |  12 ++-
+ 3 files changed, 76 insertions(+), 57 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3314,19 +3314,37 @@ out_err:
+       return err;
+ }
++static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
++                               struct cfg80211_sched_scan_request *req)
++{
++      int i;
++
++      if (!ssid || !req->ssids || !req->n_ssids)
++              return false;
++
++      for (i = 0; i < req->n_ssids; i++) {
++              if (ssid->ssid_len == req->ssids[i].ssid_len) {
++                      if (!strncmp(ssid->ssid, req->ssids[i].ssid,
++                                   ssid->ssid_len))
++                              return true;
++              }
++      }
++      return false;
++}
++
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+                               struct net_device *ndev,
+-                              struct cfg80211_sched_scan_request *request)
++                              struct cfg80211_sched_scan_request *req)
+ {
+       struct brcmf_if *ifp = netdev_priv(ndev);
+       struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+-      struct brcmf_pno_net_param_le pfn;
++      struct cfg80211_ssid *ssid;
+       int i;
+       int ret = 0;
+       brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+-                request->n_match_sets, request->n_ssids);
++                req->n_match_sets, req->n_ssids);
+       if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+               brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
+               return -EAGAIN;
+@@ -3337,71 +3355,46 @@ brcmf_cfg80211_sched_scan_start(struct w
+               return -EAGAIN;
+       }
+-      if (!request->n_ssids || !request->n_match_sets) {
+-              brcmf_dbg(SCAN, "Invalid sched scan req!! n_ssids:%d\n",
+-                        request->n_ssids);
++      if (req->n_match_sets <= 0) {
++              brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n",
++                        req->n_match_sets);
+               return -EINVAL;
+       }
+-      if (request->n_ssids > 0) {
+-              for (i = 0; i < request->n_ssids; i++) {
+-                      /* Active scan req for ssids */
+-                      brcmf_dbg(SCAN, ">>> Active scan req for ssid (%s)\n",
+-                                request->ssids[i].ssid);
+-
+-                      /* match_set ssids is a supert set of n_ssid list,
+-                       * so we need not add these set separately.
+-                       */
+-              }
++      /* clean up everything */
++      ret = brcmf_pno_clean(ifp);
++      if  (ret < 0) {
++              brcmf_err("failed error=%d\n", ret);
++              return ret;
+       }
+-      if (request->n_match_sets > 0) {
+-              /* clean up everything */
+-              ret = brcmf_pno_clean(ifp);
+-              if  (ret < 0) {
+-                      brcmf_err("failed error=%d\n", ret);
+-                      return ret;
++      /* configure pno */
++      ret = brcmf_pno_config(ifp, req);
++      if (ret < 0)
++              return ret;
++
++      /* configure each match set */
++      for (i = 0; i < req->n_match_sets; i++) {
++
++              ssid = &req->match_sets[i].ssid;
++
++              if (!ssid->ssid_len) {
++                      brcmf_err("skip broadcast ssid\n");
++                      continue;
+               }
+-              /* configure pno */
+-              ret = brcmf_pno_config(ifp, request);
++              ret = brcmf_pno_add_ssid(ifp, ssid,
++                                       brcmf_is_ssid_active(ssid, req));
+               if (ret < 0)
+-                      return ret;
+-
+-              /* configure each match set */
+-              for (i = 0; i < request->n_match_sets; i++) {
+-                      struct cfg80211_ssid *ssid;
+-                      u32 ssid_len;
+-
+-                      ssid = &request->match_sets[i].ssid;
+-                      ssid_len = ssid->ssid_len;
+-
+-                      if (!ssid_len) {
+-                              brcmf_err("skip broadcast ssid\n");
+-                              continue;
+-                      }
+-                      pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
+-                      pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
+-                      pfn.wsec = cpu_to_le32(0);
+-                      pfn.infra = cpu_to_le32(1);
+-                      pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
+-                      pfn.ssid.SSID_len = cpu_to_le32(ssid_len);
+-                      memcpy(pfn.ssid.SSID, ssid->ssid, ssid_len);
+-                      ret = brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn,
+-                                                     sizeof(pfn));
+                       brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
+                                 ret == 0 ? "set" : "failed", ssid->ssid);
+-              }
+-              /* Enable the PNO */
+-              if (brcmf_fil_iovar_int_set(ifp, "pfn", 1) < 0) {
+-                      brcmf_err("PNO enable failed!! ret=%d\n", ret);
+-                      return -EINVAL;
+-              }
+-      } else {
+-              return -EINVAL;
+       }
++      /* Enable the PNO */
++      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
++      if (ret < 0)
++              brcmf_err("PNO enable failed!! ret=%d\n", ret);
+-      return 0;
++      return ret;
+ }
+ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -28,6 +28,8 @@
+ #define BRCMF_PNO_FREQ_EXPO_MAX               3
+ #define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT        6
+ #define BRCMF_PNO_SCAN_INCOMPLETE     0
++#define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
++#define BRCMF_PNO_HIDDEN_BIT          2
+ int brcmf_pno_clean(struct brcmf_if *ifp)
+ {
+@@ -98,3 +100,19 @@ int brcmf_pno_config(struct brcmf_if *if
+       return err;
+ }
++int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++                     bool active)
++{
++      struct brcmf_pno_net_param_le pfn;
++
++      pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
++      pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
++      pfn.wsec = cpu_to_le32(0);
++      pfn.infra = cpu_to_le32(1);
++      if (active)
++              pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
++      pfn.ssid.SSID_len = cpu_to_le32(ssid->ssid_len);
++      memcpy(pfn.ssid.SSID, ssid->ssid, ssid->ssid_len);
++      return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
++}
++
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -17,8 +17,6 @@
+ #define _BRCMF_PNO_H
+ #define BRCMF_PNO_SCAN_COMPLETE               1
+-#define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
+-#define BRCMF_PNO_HIDDEN_BIT          2
+ #define BRCMF_PNO_MAX_PFN_COUNT               16
+ /**
+@@ -37,4 +35,14 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ int brcmf_pno_config(struct brcmf_if *ifp,
+                    struct cfg80211_sched_scan_request *request);
++/**
++ * brcmf_pno_add_ssid - add ssid for pno in firmware.
++ *
++ * @ifp: interface object used.
++ * @ssid: ssid information.
++ * @active: indicate this ssid needs to be actively probed.
++ */
++int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++                     bool active);
++
+ #endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch b/package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch
new file mode 100644 (file)
index 0000000..07b353b
--- /dev/null
@@ -0,0 +1,58 @@
+From ab5981c830339b945ddbedc314567a9e5f506d72 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:24 +0000
+Subject: [PATCH] brcmfmac: change prototype for brcmf_do_escan()
+
+Reduce the number of parameters as the removed ones can be obtained
+through struct brcmf_if parameter.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -1080,9 +1080,9 @@ exit:
+ }
+ static s32
+-brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy,
+-             struct brcmf_if *ifp, struct cfg80211_scan_request *request)
++brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
+ {
++      struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+       s32 err;
+       u32 passive_scan;
+       struct brcmf_scan_results *results;
+@@ -1090,7 +1090,7 @@ brcmf_do_escan(struct brcmf_cfg80211_inf
+       brcmf_dbg(SCAN, "Enter\n");
+       escan->ifp = ifp;
+-      escan->wiphy = wiphy;
++      escan->wiphy = cfg->wiphy;
+       escan->escan_state = WL_ESCAN_STATE_SCANNING;
+       passive_scan = cfg->active_scan ? 0 : 1;
+       err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
+@@ -1170,7 +1170,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy
+               if (err)
+                       goto scan_out;
+-              err = brcmf_do_escan(cfg, wiphy, vif->ifp, request);
++              err = brcmf_do_escan(vif->ifp, request);
+               if (err)
+                       goto scan_out;
+       } else {
+@@ -3289,7 +3289,7 @@ brcmf_notify_sched_scan_results(struct b
+               set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+               cfg->escan_info.run = brcmf_run_escan;
+-              err = brcmf_do_escan(cfg, wiphy, ifp, request);
++              err = brcmf_do_escan(ifp, request);
+               if (err) {
+                       clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+                       goto out_err;
diff --git a/package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch b/package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch
new file mode 100644 (file)
index 0000000..84a69f0
--- /dev/null
@@ -0,0 +1,306 @@
+From fa85b30a908455ff25def3a5f319aad272ef4862 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:25 +0000
+Subject: [PATCH] brcmfmac: make internal escan more generic
+
+For scheduled scan we initiate an escan in firmware to obtain more
+info missing from the scheduled scan notification we get from firmware.
+For upcoming functionality this is also required so make it a bit
+more generic.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 187 ++++++++++++---------
+ .../broadcom/brcm80211/brcmfmac/cfg80211.h         |   4 +-
+ 2 files changed, 109 insertions(+), 82 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -757,12 +757,12 @@ s32 brcmf_notify_escan_complete(struct b
+       brcmf_scan_config_mpc(ifp, 1);
+       /*
+-       * e-scan can be initiated by scheduled scan
++       * e-scan can be initiated internally
+        * which takes precedence.
+        */
+-      if (cfg->sched_escan) {
++      if (cfg->internal_escan) {
+               brcmf_dbg(SCAN, "scheduled scan completed\n");
+-              cfg->sched_escan = false;
++              cfg->internal_escan = false;
+               if (!aborted)
+                       cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
+       } else if (scan_request) {
+@@ -3013,7 +3013,7 @@ void brcmf_abort_scanning(struct brcmf_c
+       struct escan_info *escan = &cfg->escan_info;
+       set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
+-      if (cfg->scan_request) {
++      if (cfg->internal_escan || cfg->scan_request) {
+               escan->escan_state = WL_ESCAN_STATE_IDLE;
+               brcmf_notify_escan_complete(cfg, escan->ifp, true, true);
+       }
+@@ -3036,7 +3036,7 @@ static void brcmf_escan_timeout(unsigned
+       struct brcmf_cfg80211_info *cfg =
+                       (struct brcmf_cfg80211_info *)data;
+-      if (cfg->scan_request) {
++      if (cfg->internal_escan || cfg->scan_request) {
+               brcmf_err("timer expired\n");
+               schedule_work(&cfg->escan_timeout_work);
+       }
+@@ -3119,7 +3119,7 @@ brcmf_cfg80211_escan_handler(struct brcm
+               if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le))
+                       goto exit;
+-              if (!cfg->scan_request) {
++              if (!cfg->internal_escan && !cfg->scan_request) {
+                       brcmf_dbg(SCAN, "result without cfg80211 request\n");
+                       goto exit;
+               }
+@@ -3165,7 +3165,7 @@ brcmf_cfg80211_escan_handler(struct brcm
+               cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
+               if (brcmf_p2p_scan_finding_common_channel(cfg, NULL))
+                       goto exit;
+-              if (cfg->scan_request) {
++              if (cfg->internal_escan || cfg->scan_request) {
+                       brcmf_inform_bss(cfg);
+                       aborted = status != BRCMF_E_STATUS_SUCCESS;
+                       brcmf_notify_escan_complete(cfg, ifp, aborted, false);
+@@ -3190,6 +3190,73 @@ static void brcmf_init_escan(struct brcm
+                 brcmf_cfg80211_escan_timeout_worker);
+ }
++static struct cfg80211_scan_request *
++brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) {
++      struct cfg80211_scan_request *req;
++      size_t req_size;
++
++      req_size = sizeof(*req) +
++                 n_netinfo * sizeof(req->channels[0]) +
++                 n_netinfo * sizeof(*req->ssids);
++
++      req = kzalloc(req_size, GFP_KERNEL);
++      if (req) {
++              req->wiphy = wiphy;
++              req->ssids = (void *)(&req->channels[0]) +
++                           n_netinfo * sizeof(req->channels[0]);
++      }
++      return req;
++}
++
++static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req,
++                                       u8 *ssid, u8 ssid_len, u8 channel)
++{
++      struct ieee80211_channel *chan;
++      enum nl80211_band band;
++      int freq;
++
++      if (channel <= CH_MAX_2G_CHANNEL)
++              band = NL80211_BAND_2GHZ;
++      else
++              band = NL80211_BAND_5GHZ;
++
++      freq = ieee80211_channel_to_frequency(channel, band);
++      if (!freq)
++              return -EINVAL;
++
++      chan = ieee80211_get_channel(req->wiphy, freq);
++      if (!chan)
++              return -EINVAL;
++
++      req->channels[req->n_channels++] = chan;
++      memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len);
++      req->ssids[req->n_ssids++].ssid_len = ssid_len;
++
++      return 0;
++}
++
++static int brcmf_start_internal_escan(struct brcmf_if *ifp,
++                                    struct cfg80211_scan_request *request)
++{
++      struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
++      int err;
++
++      if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
++              /* Abort any on-going scan */
++              brcmf_abort_scanning(cfg);
++      }
++
++      set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++      cfg->escan_info.run = brcmf_run_escan;
++      err = brcmf_do_escan(ifp, request);
++      if (err) {
++              clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++              return err;
++      }
++      cfg->internal_escan = true;
++      return 0;
++}
++
+ /* PFN result doesn't have all the info which are required by the supplicant
+  * (For e.g IEs) Do a target Escan so that sched scan results are reported
+  * via wl_inform_single_bss in the required format. Escan does require the
+@@ -3203,12 +3270,8 @@ brcmf_notify_sched_scan_results(struct b
+       struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+       struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
+       struct cfg80211_scan_request *request = NULL;
+-      struct cfg80211_ssid *ssid = NULL;
+-      struct ieee80211_channel *channel = NULL;
+       struct wiphy *wiphy = cfg_to_wiphy(cfg);
+-      int err = 0;
+-      int channel_req = 0;
+-      int band = 0;
++      int i, err = 0;
+       struct brcmf_pno_scanresults_le *pfn_result;
+       u32 result_count;
+       u32 status;
+@@ -3234,83 +3297,47 @@ brcmf_notify_sched_scan_results(struct b
+        */
+       WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
+       brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
+-      if (result_count > 0) {
+-              int i;
+-
+-              request = kzalloc(sizeof(*request), GFP_KERNEL);
+-              ssid = kcalloc(result_count, sizeof(*ssid), GFP_KERNEL);
+-              channel = kcalloc(result_count, sizeof(*channel), GFP_KERNEL);
+-              if (!request || !ssid || !channel) {
+-                      err = -ENOMEM;
+-                      goto out_err;
+-              }
++      if (!result_count) {
++              brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
++              goto out_err;
++      }
++      request = brcmf_alloc_internal_escan_request(wiphy,
++                                                   result_count);
++      if (!request) {
++              err = -ENOMEM;
++              goto out_err;
++      }
+-              request->wiphy = wiphy;
+-              data += sizeof(struct brcmf_pno_scanresults_le);
+-              netinfo_start = (struct brcmf_pno_net_info_le *)data;
+-
+-              for (i = 0; i < result_count; i++) {
+-                      netinfo = &netinfo_start[i];
+-                      if (!netinfo) {
+-                              brcmf_err("Invalid netinfo ptr. index: %d\n",
+-                                        i);
+-                              err = -EINVAL;
+-                              goto out_err;
+-                      }
++      data += sizeof(struct brcmf_pno_scanresults_le);
++      netinfo_start = (struct brcmf_pno_net_info_le *)data;
+-                      brcmf_dbg(SCAN, "SSID:%s Channel:%d\n",
+-                                netinfo->SSID, netinfo->channel);
+-                      memcpy(ssid[i].ssid, netinfo->SSID, netinfo->SSID_len);
+-                      ssid[i].ssid_len = netinfo->SSID_len;
+-                      request->n_ssids++;
+-
+-                      channel_req = netinfo->channel;
+-                      if (channel_req <= CH_MAX_2G_CHANNEL)
+-                              band = NL80211_BAND_2GHZ;
+-                      else
+-                              band = NL80211_BAND_5GHZ;
+-                      channel[i].center_freq =
+-                              ieee80211_channel_to_frequency(channel_req,
+-                                                             band);
+-                      channel[i].band = band;
+-                      channel[i].flags |= IEEE80211_CHAN_NO_HT40;
+-                      request->channels[i] = &channel[i];
+-                      request->n_channels++;
+-              }
+-
+-              /* assign parsed ssid array */
+-              if (request->n_ssids)
+-                      request->ssids = &ssid[0];
+-
+-              if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+-                      /* Abort any on-going scan */
+-                      brcmf_abort_scanning(cfg);
++      for (i = 0; i < result_count; i++) {
++              netinfo = &netinfo_start[i];
++              if (!netinfo) {
++                      brcmf_err("Invalid netinfo ptr. index: %d\n",
++                                i);
++                      err = -EINVAL;
++                      goto out_err;
+               }
+-              set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+-              cfg->escan_info.run = brcmf_run_escan;
+-              err = brcmf_do_escan(ifp, request);
+-              if (err) {
+-                      clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++              brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n",
++                        netinfo->SSID, netinfo->channel);
++              err = brcmf_internal_escan_add_info(request,
++                                                  netinfo->SSID,
++                                                  netinfo->SSID_len,
++                                                  netinfo->channel);
++              if (err)
+                       goto out_err;
+-              }
+-              cfg->sched_escan = true;
+-              cfg->scan_request = request;
+-      } else {
+-              brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
+-              goto out_err;
+       }
+-      kfree(ssid);
+-      kfree(channel);
+-      kfree(request);
+-      return 0;
++      err = brcmf_start_internal_escan(ifp, request);
++      if (!err)
++              goto free_req;
+ out_err:
+-      kfree(ssid);
+-      kfree(channel);
+-      kfree(request);
+       cfg80211_sched_scan_stopped(wiphy);
++free_req:
++      kfree(request);
+       return err;
+ }
+@@ -3405,7 +3432,7 @@ static int brcmf_cfg80211_sched_scan_sto
+       brcmf_dbg(SCAN, "enter\n");
+       brcmf_pno_clean(ifp);
+-      if (cfg->sched_escan)
++      if (cfg->internal_escan)
+               brcmf_notify_escan_complete(cfg, ifp, true, true);
+       return 0;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+@@ -271,7 +271,7 @@ struct brcmf_cfg80211_wowl {
+  * @pub: common driver information.
+  * @channel: current channel.
+  * @active_scan: current scan mode.
+- * @sched_escan: e-scan for scheduled scan support running.
++ * @internal_escan: indicates internally initiated e-scan is running.
+  * @ibss_starter: indicates this sta is ibss starter.
+  * @pwr_save: indicate whether dongle to support power save mode.
+  * @dongle_up: indicate whether dongle up or not.
+@@ -303,7 +303,7 @@ struct brcmf_cfg80211_info {
+       struct brcmf_pub *pub;
+       u32 channel;
+       bool active_scan;
+-      bool sched_escan;
++      bool internal_escan;
+       bool ibss_starter;
+       bool pwr_save;
+       bool dongle_up;
diff --git a/package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch b/package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch
new file mode 100644 (file)
index 0000000..f81523a
--- /dev/null
@@ -0,0 +1,176 @@
+From fca6cb2f059e51dec3fcf3589a5abbbcce5b4043 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:26 +0000
+Subject: [PATCH] brcmfmac: split up brcmf_pno_config() function
+
+The brcmf_pno_config() function handles two configurations in
+firmware. Split it and have caller sort out what is needed.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 11 +++-
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 60 ++++++++++++++++------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 17 ++++--
+ 3 files changed, 68 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -42,6 +42,7 @@
+ #include "common.h"
+ #define BRCMF_SCAN_IE_LEN_MAX         2048
++#define BRCMF_SCHED_SCAN_PERIOD               30
+ #define WPA_OUI                               "\x00\x50\xF2"  /* WPA OUI */
+ #define WPA_OUI_TYPE                  1
+@@ -3396,10 +3397,18 @@ brcmf_cfg80211_sched_scan_start(struct w
+       }
+       /* configure pno */
+-      ret = brcmf_pno_config(ifp, req);
++      ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
+       if (ret < 0)
+               return ret;
++      /* configure random mac */
++      if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
++              ret = brcmf_pno_set_random(ifp, req->mac_addr,
++                                         req->mac_addr_mask);
++              if (ret < 0)
++                      return ret;
++      }
++
+       /* configure each match set */
+       for (i = 0; i < req->n_match_sets; i++) {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -23,10 +23,12 @@
+ #include "fwil_types.h"
+ #define BRCMF_PNO_VERSION             2
+-#define BRCMF_PNO_TIME                        30
+ #define BRCMF_PNO_REPEAT              4
+ #define BRCMF_PNO_FREQ_EXPO_MAX               3
++#define BRCMF_PNO_IMMEDIATE_SCAN_BIT  3
++#define BRCMF_PNO_ENABLE_BD_SCAN_BIT  5
+ #define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT        6
++#define BRCMF_PNO_REPORT_SEPARATELY_BIT       11
+ #define BRCMF_PNO_SCAN_INCOMPLETE     0
+ #define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
+ #define BRCMF_PNO_HIDDEN_BIT          2
+@@ -47,42 +49,68 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+       return ret;
+ }
+-int brcmf_pno_config(struct brcmf_if *ifp,
+-                   struct cfg80211_sched_scan_request *request)
++int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++                   u32 mscan, u32 bestn)
+ {
+       struct brcmf_pno_param_le pfn_param;
+-      struct brcmf_pno_macaddr_le pfn_mac;
++      u16 flags;
++      u32 pfnmem;
+       s32 err;
+-      u8 *mac_mask;
+-      int i;
+       memset(&pfn_param, 0, sizeof(pfn_param));
+       pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
+       /* set extra pno params */
+-      pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
++      flags = BIT(BRCMF_PNO_IMMEDIATE_SCAN_BIT) |
++              BIT(BRCMF_PNO_REPORT_SEPARATELY_BIT) |
++              BIT(BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+       pfn_param.repeat = BRCMF_PNO_REPEAT;
+       pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+       /* set up pno scan fr */
+-      pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
++      pfn_param.scan_freq = cpu_to_le32(scan_freq);
++
++      if (mscan) {
++              pfnmem = bestn;
++              /* set bestn in firmware */
++              err = brcmf_fil_iovar_int_set(ifp, "pfnmem", pfnmem);
++              if (err < 0) {
++                      brcmf_err("failed to set pfnmem\n");
++                      goto exit;
++              }
++              /* get max mscan which the firmware supports */
++              err = brcmf_fil_iovar_int_get(ifp, "pfnmem", &pfnmem);
++              if (err < 0) {
++                      brcmf_err("failed to get pfnmem\n");
++                      goto exit;
++              }
++              mscan = min_t(u32, mscan, pfnmem);
++              pfn_param.mscan = mscan;
++              pfn_param.bestn = bestn;
++              flags |= BIT(BRCMF_PNO_ENABLE_BD_SCAN_BIT);
++              brcmf_dbg(INFO, "mscan=%d, bestn=%d\n", mscan, bestn);
++      }
++
++      pfn_param.flags = cpu_to_le16(flags);
+       err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
+                                      sizeof(pfn_param));
+-      if (err) {
++      if (err)
+               brcmf_err("pfn_set failed, err=%d\n", err);
+-              return err;
+-      }
+-      /* Find out if mac randomization should be turned on */
+-      if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
+-              return 0;
++exit:
++      return err;
++}
++
++int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
++{
++      struct brcmf_pno_macaddr_le pfn_mac;
++      int err, i;
+       pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+       pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
+-      memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
+-      mac_mask = request->mac_addr_mask;
++      memcpy(pfn_mac.mac, mac_addr, ETH_ALEN);
+       for (i = 0; i < ETH_ALEN; i++) {
+               pfn_mac.mac[i] &= mac_mask[i];
+               pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -30,10 +30,21 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+  * brcmf_pno_config - configure pno parameters.
+  *
+  * @ifp: interface object used.
+- * @request: scheduled scan parameters.
++ * @scan_freq: scan frequency period in seconds.
++ * @mscan: maximum number of scans stored in firmware.
++ * @bestn: maximum number of APs per scan stored in firmware.
+  */
+-int brcmf_pno_config(struct brcmf_if *ifp,
+-                   struct cfg80211_sched_scan_request *request);
++int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++                   u32 mscan, u32 bestn);
++
++/**
++ * brcmf_pno_set_random - setup randomisation mac address for pno.
++ *
++ * @ifp: interface object used.
++ * @mac_addr: MAC address used with randomisation.
++ * @mac_mask: MAC address mask used for randomisation.
++ */
++int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
+ /**
+  * brcmf_pno_add_ssid - add ssid for pno in firmware.
diff --git a/package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch b/package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch
new file mode 100644 (file)
index 0000000..6dcea28
--- /dev/null
@@ -0,0 +1,292 @@
+From 3e48611d31dd333be01576902f2dc11adefc9a06 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:27 +0000
+Subject: [PATCH] brcmfmac: move scheduled scan activation to pno source file
+
+Rework .sched_scan_start() callback moving actual configuration of
+the device in pno source file.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  65 +-----------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 110 +++++++++++++++++----
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h |  29 +-----
+ 3 files changed, 94 insertions(+), 110 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -42,7 +42,6 @@
+ #include "common.h"
+ #define BRCMF_SCAN_IE_LEN_MAX         2048
+-#define BRCMF_SCHED_SCAN_PERIOD               30
+ #define WPA_OUI                               "\x00\x50\xF2"  /* WPA OUI */
+ #define WPA_OUI_TYPE                  1
+@@ -3342,24 +3341,6 @@ free_req:
+       return err;
+ }
+-static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
+-                               struct cfg80211_sched_scan_request *req)
+-{
+-      int i;
+-
+-      if (!ssid || !req->ssids || !req->n_ssids)
+-              return false;
+-
+-      for (i = 0; i < req->n_ssids; i++) {
+-              if (ssid->ssid_len == req->ssids[i].ssid_len) {
+-                      if (!strncmp(ssid->ssid, req->ssids[i].ssid,
+-                                   ssid->ssid_len))
+-                              return true;
+-              }
+-      }
+-      return false;
+-}
+-
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+                               struct net_device *ndev,
+@@ -3367,9 +3348,6 @@ brcmf_cfg80211_sched_scan_start(struct w
+ {
+       struct brcmf_if *ifp = netdev_priv(ndev);
+       struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+-      struct cfg80211_ssid *ssid;
+-      int i;
+-      int ret = 0;
+       brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+                 req->n_match_sets, req->n_ssids);
+@@ -3389,48 +3367,7 @@ brcmf_cfg80211_sched_scan_start(struct w
+               return -EINVAL;
+       }
+-      /* clean up everything */
+-      ret = brcmf_pno_clean(ifp);
+-      if  (ret < 0) {
+-              brcmf_err("failed error=%d\n", ret);
+-              return ret;
+-      }
+-
+-      /* configure pno */
+-      ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
+-      if (ret < 0)
+-              return ret;
+-
+-      /* configure random mac */
+-      if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+-              ret = brcmf_pno_set_random(ifp, req->mac_addr,
+-                                         req->mac_addr_mask);
+-              if (ret < 0)
+-                      return ret;
+-      }
+-
+-      /* configure each match set */
+-      for (i = 0; i < req->n_match_sets; i++) {
+-
+-              ssid = &req->match_sets[i].ssid;
+-
+-              if (!ssid->ssid_len) {
+-                      brcmf_err("skip broadcast ssid\n");
+-                      continue;
+-              }
+-
+-              ret = brcmf_pno_add_ssid(ifp, ssid,
+-                                       brcmf_is_ssid_active(ssid, req));
+-              if (ret < 0)
+-                      brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
+-                                ret == 0 ? "set" : "failed", ssid->ssid);
+-      }
+-      /* Enable the PNO */
+-      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
+-      if (ret < 0)
+-              brcmf_err("PNO enable failed!! ret=%d\n", ret);
+-
+-      return ret;
++      return brcmf_pno_start_sched_scan(ifp, req);
+ }
+ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -32,25 +32,10 @@
+ #define BRCMF_PNO_SCAN_INCOMPLETE     0
+ #define BRCMF_PNO_WPA_AUTH_ANY                0xFFFFFFFF
+ #define BRCMF_PNO_HIDDEN_BIT          2
++#define BRCMF_PNO_SCHED_SCAN_PERIOD   30
+-int brcmf_pno_clean(struct brcmf_if *ifp)
+-{
+-      int ret;
+-
+-      /* Disable pfn */
+-      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
+-      if (ret == 0) {
+-              /* clear pfn */
+-              ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
+-      }
+-      if (ret < 0)
+-              brcmf_err("failed code %d\n", ret);
+-
+-      return ret;
+-}
+-
+-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+-                   u32 mscan, u32 bestn)
++static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++                          u32 mscan, u32 bestn)
+ {
+       struct brcmf_pno_param_le pfn_param;
+       u16 flags;
+@@ -102,7 +87,8 @@ exit:
+       return err;
+ }
+-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
++static int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr,
++                              u8 *mac_mask)
+ {
+       struct brcmf_pno_macaddr_le pfn_mac;
+       int err, i;
+@@ -128,8 +114,8 @@ int brcmf_pno_set_random(struct brcmf_if
+       return err;
+ }
+-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+-                     bool active)
++static int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++                            bool active)
+ {
+       struct brcmf_pno_net_param_le pfn;
+@@ -144,3 +130,85 @@ int brcmf_pno_add_ssid(struct brcmf_if *
+       return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
+ }
++static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
++                               struct cfg80211_sched_scan_request *req)
++{
++      int i;
++
++      if (!ssid || !req->ssids || !req->n_ssids)
++              return false;
++
++      for (i = 0; i < req->n_ssids; i++) {
++              if (ssid->ssid_len == req->ssids[i].ssid_len) {
++                      if (!strncmp(ssid->ssid, req->ssids[i].ssid,
++                                   ssid->ssid_len))
++                              return true;
++              }
++      }
++      return false;
++}
++
++int brcmf_pno_clean(struct brcmf_if *ifp)
++{
++      int ret;
++
++      /* Disable pfn */
++      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
++      if (ret == 0) {
++              /* clear pfn */
++              ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
++      }
++      if (ret < 0)
++              brcmf_err("failed code %d\n", ret);
++
++      return ret;
++}
++
++int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
++                             struct cfg80211_sched_scan_request *req)
++{
++      struct cfg80211_ssid *ssid;
++      int i, ret;
++
++      /* clean up everything */
++      ret = brcmf_pno_clean(ifp);
++      if  (ret < 0) {
++              brcmf_err("failed error=%d\n", ret);
++              return ret;
++      }
++
++      /* configure pno */
++      ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
++      if (ret < 0)
++              return ret;
++
++      /* configure random mac */
++      if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
++              ret = brcmf_pno_set_random(ifp, req->mac_addr,
++                                         req->mac_addr_mask);
++              if (ret < 0)
++                      return ret;
++      }
++
++      /* configure each match set */
++      for (i = 0; i < req->n_match_sets; i++) {
++              ssid = &req->match_sets[i].ssid;
++              if (!ssid->ssid_len) {
++                      brcmf_err("skip broadcast ssid\n");
++                      continue;
++              }
++
++              ret = brcmf_pno_add_ssid(ifp, ssid,
++                                       brcmf_is_ssid_active(ssid, req));
++              if (ret < 0)
++                      brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
++                                ret == 0 ? "set" : "failed", ssid->ssid);
++      }
++      /* Enable the PNO */
++      ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
++      if (ret < 0)
++              brcmf_err("PNO enable failed!! ret=%d\n", ret);
++
++      return ret;
++}
++
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -27,33 +27,12 @@
+ int brcmf_pno_clean(struct brcmf_if *ifp);
+ /**
+- * brcmf_pno_config - configure pno parameters.
++ * brcmf_pno_start_sched_scan - initiate scheduled scan on device.
+  *
+  * @ifp: interface object used.
+- * @scan_freq: scan frequency period in seconds.
+- * @mscan: maximum number of scans stored in firmware.
+- * @bestn: maximum number of APs per scan stored in firmware.
++ * @req: configuration parameters for scheduled scan.
+  */
+-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+-                   u32 mscan, u32 bestn);
+-
+-/**
+- * brcmf_pno_set_random - setup randomisation mac address for pno.
+- *
+- * @ifp: interface object used.
+- * @mac_addr: MAC address used with randomisation.
+- * @mac_mask: MAC address mask used for randomisation.
+- */
+-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
+-
+-/**
+- * brcmf_pno_add_ssid - add ssid for pno in firmware.
+- *
+- * @ifp: interface object used.
+- * @ssid: ssid information.
+- * @active: indicate this ssid needs to be actively probed.
+- */
+-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+-                     bool active);
++int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
++                             struct cfg80211_sched_scan_request *req);
+ #endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch b/package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch
new file mode 100644 (file)
index 0000000..fae844c
--- /dev/null
@@ -0,0 +1,111 @@
+From 331e789443618ca9cc3ed48ada4e670225cca036 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:28 +0000
+Subject: [PATCH] brcmfmac: use provided channels for scheduled scan
+
+User-space can provide list of channels in the schedule scan request.
+This was ignored so all channels supported and allowed by the device
+were used. This patch configures the device to use the channels as
+listed in the request.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/fwil_types.h       | 16 +++++++++++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 26 +++++++++++++++++++++-
+ 2 files changed, 41 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -131,6 +131,7 @@
+ #define BRCMF_TXBF_MU_BFR_CAP         BIT(1)
+ #define       BRCMF_MAXPMKID                  16      /* max # PMKID cache entries */
++#define BRCMF_NUMCHANNELS             64
+ #define BRCMF_PFN_MACADDR_CFG_VER     1
+ #define BRCMF_PFN_MAC_OUI_ONLY                BIT(0)
+@@ -719,6 +720,21 @@ struct brcmf_pno_param_le {
+ };
+ /**
++ * struct brcmf_pno_config_le - PNO channel configuration.
++ *
++ * @reporttype: determines what is reported.
++ * @channel_num: number of channels specified in @channel_list.
++ * @channel_list: channels to use in PNO scan.
++ * @flags: reserved.
++ */
++struct brcmf_pno_config_le {
++      __le32  reporttype;
++      __le32  channel_num;
++      __le16  channel_list[BRCMF_NUMCHANNELS];
++      __le32  flags;
++};
++
++/**
+  * struct brcmf_pno_net_param_le - scan parameters per preferred network.
+  *
+  * @ssid: ssid name and its length.
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -18,9 +18,10 @@
+ #include "core.h"
+ #include "debug.h"
+-#include "pno.h"
+ #include "fwil.h"
+ #include "fwil_types.h"
++#include "cfg80211.h"
++#include "pno.h"
+ #define BRCMF_PNO_VERSION             2
+ #define BRCMF_PNO_REPEAT              4
+@@ -34,6 +35,15 @@
+ #define BRCMF_PNO_HIDDEN_BIT          2
+ #define BRCMF_PNO_SCHED_SCAN_PERIOD   30
++static int brcmf_pno_channel_config(struct brcmf_if *ifp,
++                                  struct brcmf_pno_config_le *cfg)
++{
++      cfg->reporttype = 0;
++      cfg->flags = 0;
++
++      return brcmf_fil_iovar_data_set(ifp, "pfn_cfg", cfg, sizeof(*cfg));
++}
++
+ static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+                           u32 mscan, u32 bestn)
+ {
+@@ -167,7 +177,10 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
+                              struct cfg80211_sched_scan_request *req)
+ {
++      struct brcmu_d11inf *d11inf;
++      struct brcmf_pno_config_le pno_cfg;
+       struct cfg80211_ssid *ssid;
++      u16 chan;
+       int i, ret;
+       /* clean up everything */
+@@ -190,6 +203,17 @@ int brcmf_pno_start_sched_scan(struct br
+                       return ret;
+       }
++      /* configure channels to use */
++      d11inf = &ifp->drvr->config->d11inf;
++      for (i = 0; i < req->n_channels; i++) {
++              chan = req->channels[i]->hw_value;
++              pno_cfg.channel_list[i] = cpu_to_le16(chan);
++      }
++      if (req->n_channels) {
++              pno_cfg.channel_num = cpu_to_le32(req->n_channels);
++              brcmf_pno_channel_config(ifp, &pno_cfg);
++      }
++
+       /* configure each match set */
+       for (i = 0; i < req->n_match_sets; i++) {
+               ssid = &req->match_sets[i].ssid;
diff --git a/package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch b/package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch
new file mode 100644 (file)
index 0000000..d14a60a
--- /dev/null
@@ -0,0 +1,34 @@
+From dfe5b0d52d5880bd9d4b427e1a53c9e9e4c3c820 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:29 +0000
+Subject: [PATCH] brcmfmac: remove restriction from .sched_scan_start()
+ callback
+
+In the .sched_scan_start() callback a condition was checked whether a
+normal scan was ongoing. However, there is no need for this check as
+it is ok to start the scheduled scan irrespective whether or not a
+normal scan is ongoing.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3351,10 +3351,7 @@ brcmf_cfg80211_sched_scan_start(struct w
+       brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+                 req->n_match_sets, req->n_ssids);
+-      if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+-              brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
+-              return -EAGAIN;
+-      }
++
+       if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
+               brcmf_err("Scanning suppressed: status (%lu)\n",
+                         cfg->scan_status);
diff --git a/package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch b/package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch
new file mode 100644 (file)
index 0000000..eb1d5d3
--- /dev/null
@@ -0,0 +1,67 @@
+From c6989fd55ceb633d2f18c12ffae01b9123125c89 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:30 +0000
+Subject: [PATCH] brcmfmac: use requested scan interval in scheduled scan
+
+User-space can specify the interval for the scheduled scan. This
+interval is found in scheduled scan plan. The driver supports only
+one plan, which is legacy behaviour.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 1 +
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c      | 6 +++++-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h      | 6 ++++--
+ 3 files changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6312,6 +6312,7 @@ static void brcmf_wiphy_pno_params(struc
+       wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
+       wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
+       wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
++      wiphy->max_sched_scan_plan_interval = BRCMF_PNO_SCHED_SCAN_MAX_PERIOD;
+       wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -63,6 +63,10 @@ static int brcmf_pno_config(struct brcmf
+       pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+       /* set up pno scan fr */
++      if (scan_freq < BRCMF_PNO_SCHED_SCAN_MIN_PERIOD) {
++              brcmf_dbg(SCAN, "scan period too small, using minimum\n");
++              scan_freq = BRCMF_PNO_SCHED_SCAN_MIN_PERIOD;
++      }
+       pfn_param.scan_freq = cpu_to_le32(scan_freq);
+       if (mscan) {
+@@ -191,7 +195,7 @@ int brcmf_pno_start_sched_scan(struct br
+       }
+       /* configure pno */
+-      ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
++      ret = brcmf_pno_config(ifp, req->scan_plans[0].interval, 0, 0);
+       if (ret < 0)
+               return ret;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -16,8 +16,10 @@
+ #ifndef _BRCMF_PNO_H
+ #define _BRCMF_PNO_H
+-#define BRCMF_PNO_SCAN_COMPLETE               1
+-#define BRCMF_PNO_MAX_PFN_COUNT               16
++#define BRCMF_PNO_SCAN_COMPLETE                       1
++#define BRCMF_PNO_MAX_PFN_COUNT                       16
++#define BRCMF_PNO_SCHED_SCAN_MIN_PERIOD       10
++#define BRCMF_PNO_SCHED_SCAN_MAX_PERIOD       508
+ /**
+  * brcmf_pno_clean - disable and clear pno in firmware.
diff --git a/package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch b/package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch
new file mode 100644 (file)
index 0000000..bbd8774
--- /dev/null
@@ -0,0 +1,76 @@
+From 53e3a80d80c80bf50ab64cf6c44fb0fa41aa22d8 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:31 +0000
+Subject: [PATCH] brcmfmac: fix scheduled scan result handling for newer chips
+
+The scan results for scheduled scan as retrieved from the device
+have changed. A field has been added which is not needed. However,
+the appended info is. Luckily they are versioned so check that to
+find out the location of the appended data.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 24 +++++++++++++++++++++-
+ .../broadcom/brcm80211/brcmfmac/fwil_types.h       |  7 +++++++
+ 2 files changed, 30 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3257,6 +3257,28 @@ static int brcmf_start_internal_escan(st
+       return 0;
+ }
++static struct brcmf_pno_net_info_le *
++brcmf_get_netinfo_array(struct brcmf_pno_scanresults_le *pfn_v1)
++{
++      struct brcmf_pno_scanresults_v2_le *pfn_v2;
++      struct brcmf_pno_net_info_le *netinfo;
++
++      switch (pfn_v1->version) {
++      default:
++              WARN_ON(1);
++              /* fall-thru */
++      case cpu_to_le32(1):
++              netinfo = (struct brcmf_pno_net_info_le *)(pfn_v1 + 1);
++              break;
++      case cpu_to_le32(2):
++              pfn_v2 = (struct brcmf_pno_scanresults_v2_le *)pfn_v1;
++              netinfo = (struct brcmf_pno_net_info_le *)(pfn_v2 + 1);
++              break;
++      }
++
++      return netinfo;
++}
++
+ /* PFN result doesn't have all the info which are required by the supplicant
+  * (For e.g IEs) Do a target Escan so that sched scan results are reported
+  * via wl_inform_single_bss in the required format. Escan does require the
+@@ -3309,7 +3331,7 @@ brcmf_notify_sched_scan_results(struct b
+       }
+       data += sizeof(struct brcmf_pno_scanresults_le);
+-      netinfo_start = (struct brcmf_pno_net_info_le *)data;
++      netinfo_start = brcmf_get_netinfo_array(pfn_result);
+       for (i = 0; i < result_count; i++) {
+               netinfo = &netinfo_start[i];
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -785,6 +785,13 @@ struct brcmf_pno_scanresults_le {
+       __le32 count;
+ };
++struct brcmf_pno_scanresults_v2_le {
++      __le32 version;
++      __le32 status;
++      __le32 count;
++      __le32 scan_ch_bucket;
++};
++
+ /**
+  * struct brcmf_pno_macaddr_le - to configure PNO macaddr randomization.
+  *
index 58af4d9078b86606ed24a41ff3e92c649efe25be..c2ea3683238473a21e8f2a8f4a15342a4ab4a2b0 100644 (file)
@@ -28,7 +28,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5915,7 +5915,6 @@ static int brcmf_construct_chaninfo(stru
+@@ -5823,7 +5823,6 @@ static int brcmf_construct_chaninfo(stru
        u32 i, j;
        u32 total;
        u32 chaninfo;
@@ -36,7 +36,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  
        pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
  
-@@ -5963,33 +5962,36 @@ static int brcmf_construct_chaninfo(stru
+@@ -5871,33 +5870,36 @@ static int brcmf_construct_chaninfo(stru
                    ch.bw == BRCMU_CHAN_BW_80)
                        continue;
  
@@ -85,7 +85,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
                        ch.bw = BRCMU_CHAN_BW_20;
                        cfg->d11inf.encchspec(&ch);
                        chaninfo = ch.chspec;
-@@ -5997,11 +5999,11 @@ static int brcmf_construct_chaninfo(stru
+@@ -5905,11 +5907,11 @@ static int brcmf_construct_chaninfo(stru
                                                       &chaninfo);
                        if (!err) {
                                if (chaninfo & WL_CHAN_RADAR)
index dbe45642f33d4fa8714cafc847548c3fd20e33da..5a66a3518e904f5fd6a1a600afb4170d7db377a0 100644 (file)
@@ -17,7 +17,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -147,7 +147,6 @@ static struct ieee80211_rate __wl_rates[
+@@ -138,7 +138,6 @@ static struct ieee80211_rate __wl_rates[
        .band                   = NL80211_BAND_2GHZ,            \
        .center_freq            = (_freq),                      \
        .hw_value               = (_channel),                   \
@@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
        .max_antenna_gain       = 0,                            \
        .max_power              = 30,                           \
  }
-@@ -156,7 +155,6 @@ static struct ieee80211_rate __wl_rates[
+@@ -147,7 +146,6 @@ static struct ieee80211_rate __wl_rates[
        .band                   = NL80211_BAND_5GHZ,            \
        .center_freq            = 5000 + (5 * (_channel)),      \
        .hw_value               = (_channel),                   \
index 9c773bd16ff94c578a509ab96aaa24afbeee623b..29ebad7ba244e9cabe4c8cd5d0c2d079f77393c7 100644 (file)
@@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6566,8 +6566,7 @@ static int brcmf_setup_wiphy(struct wiph
+@@ -6475,8 +6475,7 @@ static int brcmf_setup_wiphy(struct wiph
                        wiphy->bands[NL80211_BAND_5GHZ] = band;
                }
        }
@@ -35,7 +35,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  }
  
  static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
-@@ -6932,6 +6931,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+@@ -6841,6 +6840,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802
                goto priv_out;
        }
  
index 9f26a4964010f845e032b59a9383578bc6b79701..c23d4c070e937555232ced77718bb706c5e99a00 100644 (file)
@@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5976,6 +5976,9 @@ static int brcmf_construct_chaninfo(stru
+@@ -5884,6 +5884,9 @@ static int brcmf_construct_chaninfo(stru
                        continue;
                }
  
@@ -19,7 +19,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
                /* assuming the chanspecs order is HT20,
                 * HT40 upper, HT40 lower, and VHT80.
                 */
-@@ -6566,6 +6569,9 @@ static int brcmf_setup_wiphy(struct wiph
+@@ -6475,6 +6478,9 @@ static int brcmf_setup_wiphy(struct wiph
                        wiphy->bands[NL80211_BAND_5GHZ] = band;
                }
        }
index 7551b7dfa3a15c558bea31b23ed023d878bc6024..c7b13892a40438801a6a6bc3f55cacfebb80bc04 100644 (file)
@@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -663,9 +663,37 @@ static struct wireless_dev *brcmf_cfg802
+@@ -654,9 +654,37 @@ static struct wireless_dev *brcmf_cfg802
                                                     u32 *flags,
                                                     struct vif_params *params)
  {
index 70b8844e63f290c5a8cdcc179986e1c9e9cfda55..83bc7fe1fd5c739a61da8400d86df0db6c580fe9 100644 (file)
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2782,6 +2782,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2773,6 +2773,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
         * preference in cfg struct to apply this to
         * FW later while initializing the dongle
         */