+++ /dev/null
-From 8dff6729a634d7cf223679d9a29a3df77927540c Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 8 Aug 2009 23:47:53 +0200
-Subject: [PATCH 2/3] rt2x00: Implement support for rt2800pci
-
-Add support for the rt2800pci chipset.
-
-Includes various patches from Luis, Mattias, Mark, Felix and Xose.
-
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
-Signed-off-by: Mark Asselstine <asselsm@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/Kconfig | 26 +
- drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 3243 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800pci.h | 1929 ++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h | 6 +
- 5 files changed, 5205 insertions(+), 0 deletions(-)
- create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
- create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
-
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
- obj-$(CONFIG_RT2400PCI) += rt2400pci.o
- obj-$(CONFIG_RT2500PCI) += rt2500pci.o
- obj-$(CONFIG_RT61PCI) += rt61pci.o
-+obj-$(CONFIG_RT2800PCI) += rt2800pci.o
- obj-$(CONFIG_RT2500USB) += rt2500usb.o
- obj-$(CONFIG_RT73USB) += rt73usb.o
- obj-$(CONFIG_RT2800USB) += rt2800usb.o
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,3240 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800pci
-+ Abstract: rt2800pci device specific routines.
-+ Supported chipsets: RT2800E & RT2800ED.
-+ */
-+
-+#include <linux/crc-ccitt.h>
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/eeprom_93cx6.h>
-+
-+#include "rt2x00.h"
-+#include "rt2x00pci.h"
-+#include "rt2x00soc.h"
-+#include "rt2800pci.h"
-+
-+#ifdef CONFIG_RT2800PCI_PCI_MODULE
-+#define CONFIG_RT2800PCI_PCI
-+#endif
-+
-+#ifdef CONFIG_RT2800PCI_WISOC_MODULE
-+#define CONFIG_RT2800PCI_WISOC
-+#endif
-+
-+/*
-+ * Allow hardware encryption to be disabled.
-+ */
-+static int modparam_nohwcrypt = 0;
-+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-+
-+/*
-+ * Register access.
-+ * BBP and RF register require indirect register access,
-+ * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
-+ * These indirect registers work with busy bits,
-+ * and we will try maximal REGISTER_BUSY_COUNT times to access
-+ * the register while taking a REGISTER_BUSY_DELAY us delay
-+ * between each attampt. When the busy bit is still set at that time,
-+ * the access attempt is considered to have failed,
-+ * and we will print an error.
-+ */
-+#define WAIT_FOR_BBP(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RFCSR(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RF(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-+#define WAIT_FOR_MCU(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-+ H2M_MAILBOX_CSR_OWNER, (__reg))
-+
-+static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-+
-+ WAIT_FOR_BBP(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+
-+ WAIT_FOR_RFCSR(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u32 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RF becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RF(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
-+ rt2x00_rf_write(rt2x00dev, word, value);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
-+ const u8 command, const u8 token,
-+ const u8 arg0, const u8 arg1)
-+{
-+ u32 reg;
-+
-+ /*
-+ * RT2880 and RT3052 don't support MCU requests.
-+ */
-+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
-+ rt2x00_rt(&rt2x00dev->chip, RT3052))
-+ return;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the MCU becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_MCU(rt2x00dev, ®)) {
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
-+
-+ reg = 0;
-+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
-+ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < 200; i++) {
-+ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
-+
-+ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
-+ break;
-+
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ if (i == 200)
-+ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
-+
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-+}
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
-+
-+ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
-+}
-+#else
-+static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
-+{
-+}
-+#endif /* CONFIG_RT2800PCI_WISOC */
-+
-+#ifdef CONFIG_RT2800PCI_PCI
-+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
-+{
-+ struct rt2x00_dev *rt2x00dev = eeprom->data;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
-+
-+ eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
-+ eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
-+ eeprom->reg_data_clock =
-+ !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
-+ eeprom->reg_chip_select =
-+ !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
-+}
-+
-+static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
-+{
-+ struct rt2x00_dev *rt2x00dev = eeprom->data;
-+ u32 reg = 0;
-+
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK,
-+ !!eeprom->reg_data_clock);
-+ rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT,
-+ !!eeprom->reg_chip_select);
-+
-+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
-+}
-+
-+static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct eeprom_93cx6 eeprom;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
-+
-+ eeprom.data = rt2x00dev;
-+ eeprom.register_read = rt2800pci_eepromregister_read;
-+ eeprom.register_write = rt2800pci_eepromregister_write;
-+ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
-+ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
-+ eeprom.reg_data_in = 0;
-+ eeprom.reg_data_out = 0;
-+ eeprom.reg_data_clock = 0;
-+ eeprom.reg_chip_select = 0;
-+
-+ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
-+ EEPROM_SIZE / sizeof(u16));
-+}
-+#else
-+static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
-+{
-+}
-+#endif /* CONFIG_RT2800PCI_PCI */
-+
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+static const struct rt2x00debug rt2800pci_rt2x00debug = {
-+ .owner = THIS_MODULE,
-+ .csr = {
-+ .read = rt2x00pci_register_read,
-+ .write = rt2x00pci_register_write,
-+ .flags = RT2X00DEBUGFS_OFFSET,
-+ .word_base = CSR_REG_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = CSR_REG_SIZE / sizeof(u32),
-+ },
-+ .eeprom = {
-+ .read = rt2x00_eeprom_read,
-+ .write = rt2x00_eeprom_write,
-+ .word_base = EEPROM_BASE,
-+ .word_size = sizeof(u16),
-+ .word_count = EEPROM_SIZE / sizeof(u16),
-+ },
-+ .bbp = {
-+ .read = rt2800pci_bbp_read,
-+ .write = rt2800pci_bbp_write,
-+ .word_base = BBP_BASE,
-+ .word_size = sizeof(u8),
-+ .word_count = BBP_SIZE / sizeof(u8),
-+ },
-+ .rf = {
-+ .read = rt2x00_rf_read,
-+ .write = rt2800pci_rf_write,
-+ .word_base = RF_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = RF_SIZE / sizeof(u32),
-+ },
-+};
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+
-+static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
-+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-+}
-+
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness brightness)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ unsigned int enabled = brightness != LED_OFF;
-+ unsigned int bg_mode =
-+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-+ unsigned int polarity =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_POLARITY);
-+ unsigned int ledmode =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_MODE);
-+
-+ if (led->type == LED_TYPE_RADIO) {
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? 0x20 : 0);
-+ } else if (led->type == LED_TYPE_ASSOC) {
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-+ } else if (led->type == LED_TYPE_QUALITY) {
-+ /*
-+ * The brightness is divided into 6 levels (0 - 5),
-+ * The specs tell us the following levels:
-+ * 0, 1 ,3, 7, 15, 31
-+ * to determine the level in a simple way we can simply
-+ * work with bitshifting:
-+ * (1 << level) - 1
-+ */
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-+ (1 << brightness / (LED_FULL / 6)) - 1,
-+ polarity);
-+ }
-+}
-+
-+static int rt2800pci_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ u32 reg;
-+
-+ rt2x00pci_register_read(led->rt2x00dev, LED_CFG, ®);
-+ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
-+ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
-+ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
-+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
-+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
-+ rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_led *led,
-+ enum led_type type)
-+{
-+ led->rt2x00dev = rt2x00dev;
-+ led->type = type;
-+ led->led_dev.brightness_set = rt2800pci_brightness_set;
-+ led->led_dev.blink_set = rt2800pci_blink_set;
-+ led->flags = LED_INITIALIZED;
-+}
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+/*
-+ * Configuration handlers.
-+ */
-+static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct mac_wcid_entry wcid_entry;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+ u32 reg;
-+
-+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
-+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX,
-+ (crypto->cmd == SET_KEY) * crypto->bssidx);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-+
-+ memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-+ if ((crypto->cipher == CIPHER_TKIP) ||
-+ (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-+ (crypto->cipher == CIPHER_AES))
-+ iveiv_entry.iv[3] |= 0x20;
-+ iveiv_entry.iv[3] |= key->keyidx << 6;
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ offset = MAC_WCID_ENTRY(key->hw_key_idx);
-+
-+ memset(&wcid_entry, 0, sizeof(wcid_entry));
-+ if (crypto->cmd == SET_KEY)
-+ memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &wcid_entry, sizeof(wcid_entry));
-+}
-+
-+static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ struct rt2x00_field32 field;
-+ u32 offset;
-+ u32 reg;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &key_entry, sizeof(key_entry));
-+ }
-+
-+ /*
-+ * The cipher types are stored over multiple registers
-+ * starting with SHARED_KEY_MODE_BASE each word will have
-+ * 32 bits and contains the cipher types for 2 bssidx each.
-+ * Using the correct defines correctly will cause overhead,
-+ * so just calculate the correct offset.
-+ */
-+ field.bit_offset = 4 * (key->hw_key_idx % 8);
-+ field.bit_mask = 0x7 << field.bit_offset;
-+
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ u32 offset;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ /*
-+ * 1 pairwise key is possible per AID, this means that the AID
-+ * equals our hw_key_idx. Make sure the WCID starts _after_ the
-+ * last possible shared key entry.
-+ */
-+ if (crypto->aid > (256 - 32))
-+ return -ENOSPC;
-+
-+ key->hw_key_idx = 32 + crypto->aid;
-+
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &key_entry, sizeof(key_entry));
-+ }
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int filter_flags)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Start configuration steps.
-+ * Note that the version error will always be dropped
-+ * and broadcast frames will always be accepted since
-+ * there is no filter for it at this time.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, ®);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
-+ !(filter_flags & FIF_FCSFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
-+ !(filter_flags & FIF_PLCPFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
-+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
-+ !(filter_flags & FIF_ALLMULTI));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
-+ !(filter_flags & FIF_PSPOLL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-+}
-+
-+static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_intf *intf,
-+ struct rt2x00intf_conf *conf,
-+ const unsigned int flags)
-+{
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ if (flags & CONFIG_UPDATE_TYPE) {
-+ /*
-+ * Clear current synchronisation setup.
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-+ rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
-+
-+ /*
-+ * Enable synchronisation.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+
-+ if (flags & CONFIG_UPDATE_MAC) {
-+ reg = le32_to_cpu(conf->mac[1]);
-+ rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-+ conf->mac[1] = cpu_to_le32(reg);
-+
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-+ conf->mac, sizeof(conf->mac));
-+ }
-+
-+ if (flags & CONFIG_UPDATE_BSSID) {
-+ reg = le32_to_cpu(conf->bssid[1]);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-+ conf->bssid[1] = cpu_to_le32(reg);
-+
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-+ conf->bssid, sizeof(conf->bssid));
-+ }
-+}
-+
-+static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_erp *erp)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
-+ !!erp->short_preamble);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
-+ !!erp->short_preamble);
-+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
-+ erp->cts_protection ? 2 : 0);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-+ erp->basic_rates);
-+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-+ rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
-+ erp->beacon_int * 16);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+}
-+
-+static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
-+ struct antenna_setup *ant)
-+{
-+ u8 r1;
-+ u8 r3;
-+
-+ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-+ rt2800pci_bbp_read(rt2x00dev, 3, &r3);
-+
-+ /*
-+ * Configure the TX antenna.
-+ */
-+ switch ((int)ant->tx) {
-+ case 1:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-+ break;
-+ case 3:
-+ /* Do nothing */
-+ break;
-+ }
-+
-+ /*
-+ * Configure the RX antenna.
-+ */
-+ switch ((int)ant->rx) {
-+ case 1:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-+ break;
-+ case 3:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-+ break;
-+ }
-+
-+ rt2800pci_bbp_write(rt2x00dev, 3, r3);
-+ rt2800pci_bbp_write(rt2x00dev, 1, r1);
-+}
-+
-+static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u16 eeprom;
-+ short lna_gain;
-+
-+ if (libconf->rf.channel <= 14) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-+ } else if (libconf->rf.channel <= 64) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-+ } else if (libconf->rf.channel <= 128) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-+ } else {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-+ }
-+
-+ rt2x00dev->lna_gain = lna_gain;
-+}
-+
-+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-+
-+ if (rt2x00dev->default_ant.tx == 1)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-+
-+ if (rt2x00dev->default_ant.rx == 1) {
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+ } else if (rt2x00dev->default_ant.rx == 2)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+
-+ if (rf->channel > 14) {
-+ /*
-+ * When TX power is below 0, we should increase it by 7 to
-+ * make it a positive value (Minumum value is -7).
-+ * However this means that values between 0 and 7 have
-+ * double meaning, and we should set a 7DBm boost flag.
-+ */
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power1 >= 0));
-+
-+ if (info->tx_power1 < 0)
-+ info->tx_power1 += 7;
-+
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power1));
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power2 >= 0));
-+
-+ if (info->tx_power2 < 0)
-+ info->tx_power2 += 7;
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power2));
-+ } else {
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power2));
-+ }
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+}
-+
-+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u8 rfcsr;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24,
-+ rt2x00dev->calibration[conf_is_ht40(conf)]);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+}
-+
-+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u32 reg;
-+ unsigned int tx_pin;
-+ u8 bbp;
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
-+ else
-+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
-+
-+ /*
-+ * Change BBP settings
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 86, 0);
-+
-+ if (rf->channel <= 14) {
-+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
-+
-+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-+ else
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, ®);
-+ rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
-+ rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
-+ rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg);
-+
-+ tx_pin = 0;
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00dev->default_ant.tx != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-+ }
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00dev->default_ant.rx != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-+ }
-+
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
-+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ if (conf_is_ht40(conf)) {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
-+ }
-+ }
-+
-+ msleep(1);
-+}
-+
-+static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
-+ const int txpower)
-+{
-+ u32 reg;
-+ u32 value = TXPOWER_G_TO_DEV(txpower);
-+ u8 r1;
-+
-+ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-+ rt2x00_set_field8(®, BBP1_TX_POWER, 0);
-+ rt2800pci_bbp_write(rt2x00dev, 1, r1);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-+}
-+
-+static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
-+ libconf->conf->short_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
-+ libconf->conf->long_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-+ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg);
-+}
-+
-+static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ enum dev_state state =
-+ (libconf->conf->flags & IEEE80211_CONF_PS) ?
-+ STATE_SLEEP : STATE_AWAKE;
-+ u32 reg;
-+
-+ if (state == STATE_SLEEP) {
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-+ libconf->conf->listen_interval - 1);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-+ } else {
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+ }
-+}
-+
-+static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf,
-+ const unsigned int flags)
-+{
-+ /* Always recalculate LNA gain before changing configuration */
-+ rt2800pci_config_lna_gain(rt2x00dev, libconf);
-+
-+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-+ rt2800pci_config_channel(rt2x00dev, libconf->conf,
-+ &libconf->rf, &libconf->channel);
-+ if (flags & IEEE80211_CONF_CHANGE_POWER)
-+ rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
-+ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-+ rt2800pci_config_retry_limit(rt2x00dev, libconf);
-+ if (flags & IEEE80211_CONF_CHANGE_PS)
-+ rt2800pci_config_ps(rt2x00dev, libconf);
-+}
-+
-+/*
-+ * Link tuning
-+ */
-+static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Update FCS error count from register.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-+}
-+
-+static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-+{
-+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
-+ return 0x2e + rt2x00dev->lna_gain;
-+
-+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-+ else
-+ return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-+}
-+
-+static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, u8 vgc_level)
-+{
-+ if (qual->vgc_level != vgc_level) {
-+ rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
-+ qual->vgc_level = vgc_level;
-+ qual->vgc_level_reg = vgc_level;
-+ }
-+}
-+
-+static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ rt2800pci_set_vgc(rt2x00dev, qual,
-+ rt2800pci_get_default_vgc(rt2x00dev));
-+}
-+
-+static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, const u32 count)
-+{
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-+ return;
-+
-+ /*
-+ * When RSSI is better then -80 increase VGC level with 0x10
-+ */
-+ rt2800pci_set_vgc(rt2x00dev, qual,
-+ rt2800pci_get_default_vgc(rt2x00dev) +
-+ ((qual->rssi > -80) * 0x10));
-+}
-+
-+/*
-+ * Firmware functions
-+ */
-+static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
-+{
-+ return FIRMWARE_RT2860;
-+}
-+
-+static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ u16 fw_crc;
-+ u16 crc;
-+
-+ /*
-+ * Only support 8kb firmware files.
-+ */
-+ if (len != 8192)
-+ return FW_BAD_LENGTH;
-+
-+ /*
-+ * The last 2 bytes in the firmware array are the crc checksum itself,
-+ * this means that we should never pass those 2 bytes to the crc
-+ * algorithm.
-+ */
-+ fw_crc = (data[len - 2] << 8 | data[len - 1]);
-+
-+ /*
-+ * Use the crc ccitt algorithm.
-+ * This will return the same value as the legacy driver which
-+ * used bit ordering reversion on the both the firmware bytes
-+ * before input input as well as on the final output.
-+ * Obviously using crc ccitt directly is much more efficient.
-+ */
-+ crc = crc_ccitt(~0, data, len - 2);
-+
-+ /*
-+ * There is a small difference between the crc-itu-t + bitrev and
-+ * the crc-ccitt crc calculation. In the latter method the 2 bytes
-+ * will be swapped, use swab16 to convert the crc to the correct
-+ * value.
-+ */
-+ crc = swab16(crc);
-+
-+ return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
-+}
-+
-+static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ /*
-+ * Wait for stable hardware.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
-+ if (reg && reg != ~0)
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "Unstable hardware.\n");
-+ return -EBUSY;
-+ }
-+
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
-+
-+ /*
-+ * Disable DMA, will be reenabled later when enabling
-+ * the radio.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ /*
-+ * enable Host program ram write selection
-+ */
-+ reg = 0;
-+ rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
-+
-+ /*
-+ * Write firmware to device.
-+ */
-+ rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-+ data, len);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
-+
-+ /*
-+ * Wait for device to stabilize.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
-+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "PBF system register not ready.\n");
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Disable interrupts
-+ */
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
-+
-+ /*
-+ * Initialize BBP R/W access agent
-+ */
-+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Initialization functions.
-+ */
-+static bool rt2800pci_get_entry_state(struct queue_entry *entry)
-+{
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ u32 word;
-+
-+ if (entry->queue->qid == QID_RX) {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+
-+ return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
-+ } else {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+
-+ return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
-+ }
-+}
-+
-+static void rt2800pci_clear_entry(struct queue_entry *entry)
-+{
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ u32 word;
-+
-+ if (entry->queue->qid == QID_RX) {
-+ rt2x00_desc_read(entry_priv->desc, 0, &word);
-+ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
-+ rt2x00_desc_write(entry_priv->desc, 0, word);
-+
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
-+ } else {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
-+ }
-+}
-+
-+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct queue_entry_priv_pci *entry_priv;
-+ u32 reg;
-+
-+ /*
-+ * Initialize registers.
-+ */
-+ entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
-+
-+ entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
-+
-+ entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
-+
-+ entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
-+
-+ entry_priv = rt2x00dev->rx->entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
-+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
-+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
-+
-+ /*
-+ * Enable global DMA configuration
-+ */
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ unsigned int i;
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
-+
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-+ rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
-+ else
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
-+ rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-+ rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
-+ IEEE80211_MAX_RTS_THRESHOLD);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-+
-+ /*
-+ * ASIC will keep garbage value after boot, clear encryption keys.
-+ */
-+ for (i = 0; i < 256; i++) {
-+ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-+ wcid, sizeof(wcid));
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-+ }
-+
-+ for (i = 0; i < 16; i++)
-+ rt2x00pci_register_write(rt2x00dev,
-+ SHARED_KEY_MODE_ENTRY(i), 0);
-+
-+ /*
-+ * Clear all beacons
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-+
-+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
-+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
-+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
-+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-+
-+ /*
-+ * We must clear the error counters.
-+ * These registers are cleared on read,
-+ * so we may pass a useless variable to store the value.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®);
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, ®);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, ®);
-+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-+ return 0;
-+
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u8 value;
-+
-+ /*
-+ * BBP was enabled after firmware was loaded,
-+ * but we need to reactivate it now.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-+ msleep(1);
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800pci_bbp_read(rt2x00dev, 0, &value);
-+ if ((value != 0xff) && (value != 0x00))
-+ return 0;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u16 eeprom;
-+ u8 reg_id;
-+ u8 value;
-+
-+ if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) ||
-+ rt2800pci_wait_bbp_ready(rt2x00dev)))
-+ return -EACCES;
-+
-+ rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
-+ rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
-+ rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
-+ rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
-+ rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
-+ rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
-+ }
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
-+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
-+
-+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
-+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
-+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
-+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
-+ }
-+
-+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-+
-+ if (eeprom != 0xffff && eeprom != 0x0000) {
-+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-+ rt2800pci_bbp_write(rt2x00dev, reg_id, value);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-+ bool bw40, u8 rfcsr24, u8 filter_target)
-+{
-+ unsigned int i;
-+ u8 bbp;
-+ u8 rfcsr;
-+ u8 passband;
-+ u8 stopband;
-+ u8 overtuned = 0;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * Set power & frequency of passband test tone
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
-+ if (passband)
-+ break;
-+ }
-+
-+ /*
-+ * Set power & frequency of stopband test tone
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
-+
-+ if ((passband - stopband) <= filter_target) {
-+ rfcsr24++;
-+ overtuned += ((passband - stopband) == filter_target);
-+ } else
-+ break;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ }
-+
-+ rfcsr24 -= !!overtuned;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ return rfcsr24;
-+}
-+
-+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 rfcsr;
-+ u8 bbp;
-+
-+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3022))
-+ return 0;
-+
-+ /*
-+ * Init RF calibration.
-+ */
-+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+ msleep(1);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
-+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
-+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
-+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
-+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
-+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
-+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
-+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
-+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
-+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
-+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
-+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
-+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
-+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
-+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
-+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
-+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
-+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
-+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
-+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
-+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
-+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
-+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
-+
-+ /*
-+ * Set RX Filter calibration for 20MHz and 40MHz
-+ */
-+ rt2x00dev->calibration[0] =
-+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-+ rt2x00dev->calibration[1] =
-+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-+
-+ /*
-+ * Set back to initial state
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * set BBP back to BW20
-+ */
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Device state switch handlers.
-+ */
-+static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX,
-+ (state == STATE_RADIO_RX_ON) ||
-+ (state == STATE_RADIO_RX_ON_LINK));
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+}
-+
-+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ int mask = (state == STATE_RADIO_IRQ_ON);
-+ u32 reg;
-+
-+ /*
-+ * When interrupts are being enabled, the interrupt registers
-+ * should clear the register to assure a clean state.
-+ */
-+ if (state == STATE_RADIO_IRQ_ON) {
-+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
-+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask);
-+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
-+}
-+
-+static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-+ return 0;
-+
-+ msleep(1);
-+ }
-+
-+ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 word;
-+
-+ /*
-+ * Initialize all registers.
-+ */
-+ if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-+ rt2800pci_init_queues(rt2x00dev) ||
-+ rt2800pci_init_registers(rt2x00dev) ||
-+ rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-+ rt2800pci_init_bbp(rt2x00dev) ||
-+ rt2800pci_init_rfcsr(rt2x00dev)))
-+ return -EIO;
-+
-+ /*
-+ * Send signal to firmware during boot time.
-+ */
-+ rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
-+
-+ /*
-+ * Enable RX.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ /*
-+ * Initialize LED control
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
-+
-+ /* Wait for DMA, ignore error */
-+ rt2800pci_wait_wpdma_ready(rt2x00dev);
-+}
-+
-+static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ /*
-+ * Always put the device to sleep (even when we intend to wakeup!)
-+ * if the device is booting and wasn't asleep it will return
-+ * failure when attempting to wakeup.
-+ */
-+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
-+
-+ if (state == STATE_AWAKE) {
-+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
-+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
-+ }
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ int retval = 0;
-+
-+ switch (state) {
-+ case STATE_RADIO_ON:
-+ /*
-+ * Before the radio can be enabled, the device first has
-+ * to be woken up. After that it needs a bit of time
-+ * to be fully awake and then the radio can be enabled.
-+ */
-+ rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
-+ msleep(1);
-+ retval = rt2800pci_enable_radio(rt2x00dev);
-+ break;
-+ case STATE_RADIO_OFF:
-+ /*
-+ * After the radio has been disabled, the device should
-+ * be put to sleep for powersaving.
-+ */
-+ rt2800pci_disable_radio(rt2x00dev);
-+ rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
-+ break;
-+ case STATE_RADIO_RX_ON:
-+ case STATE_RADIO_RX_ON_LINK:
-+ case STATE_RADIO_RX_OFF:
-+ case STATE_RADIO_RX_OFF_LINK:
-+ rt2800pci_toggle_rx(rt2x00dev, state);
-+ break;
-+ case STATE_RADIO_IRQ_ON:
-+ case STATE_RADIO_IRQ_OFF:
-+ rt2800pci_toggle_irq(rt2x00dev, state);
-+ break;
-+ case STATE_DEEP_SLEEP:
-+ case STATE_SLEEP:
-+ case STATE_STANDBY:
-+ case STATE_AWAKE:
-+ retval = rt2800pci_set_state(rt2x00dev, state);
-+ break;
-+ default:
-+ retval = -ENOTSUPP;
-+ break;
-+ }
-+
-+ if (unlikely(retval))
-+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
-+ state, retval);
-+
-+ return retval;
-+}
-+
-+/*
-+ * TX descriptor initialization
-+ */
-+static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-+ struct sk_buff *skb,
-+ struct txentry_desc *txdesc)
-+{
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-+ __le32 *txd = skbdesc->desc;
-+ __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom);
-+ u32 word;
-+
-+ /*
-+ * Initialize TX Info descriptor
-+ */
-+ rt2x00_desc_read(txwi, 0, &word);
-+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
-+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_TS,
-+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
-+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
-+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
-+ rt2x00_set_field32(&word, TXWI_W0_BW,
-+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
-+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
-+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
-+ rt2x00_desc_write(txwi, 0, word);
-+
-+ rt2x00_desc_read(txwi, 1, &word);
-+ rt2x00_set_field32(&word, TXWI_W1_ACK,
-+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
-+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
-+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
-+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-+ txdesc->key_idx : 0xff);
-+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
-+ skb->len - txdesc->l2pad);
-+ rt2x00_set_field32(&word, TXWI_W1_PACKETID,
-+ skbdesc->entry->queue->qid);
-+ rt2x00_desc_write(txwi, 1, word);
-+
-+ /*
-+ * Always write 0 to IV/EIV fields, hardware will insert the IV
-+ * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0.
-+ * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data
-+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
-+ * crypto entry in the registers should be used to encrypt the frame.
-+ */
-+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
-+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-+
-+ /*
-+ * Initialize TX descriptor
-+ */
-+ rt2x00_desc_read(txd, 0, &word);
-+ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
-+ rt2x00_desc_write(txd, 0, word);
-+
-+ rt2x00_desc_read(txd, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1);
-+ rt2x00_set_field32(&word, TXD_W1_BURST,
-+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
-+ rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0,
-+ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(txd, 1, word);
-+
-+ rt2x00_desc_read(txd, 2, &word);
-+ rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
-+ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_desc_write(txd, 2, word);
-+
-+ rt2x00_desc_read(txd, 3, &word);
-+ rt2x00_set_field32(&word, TXD_W3_WIV,
-+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
-+ rt2x00_desc_write(txd, 3, word);
-+}
-+
-+/*
-+ * TX data initialization
-+ */
-+static void rt2800pci_write_beacon(struct queue_entry *entry)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ /*
-+ * Disable beaconing while we are reloading the beacon data,
-+ * otherwise we might be sending out invalid data.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ /*
-+ * Write entire beacon with descriptor to register.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev,
-+ beacon_base,
-+ skbdesc->desc, skbdesc->desc_len);
-+ rt2x00pci_register_multiwrite(rt2x00dev,
-+ beacon_base + skbdesc->desc_len,
-+ entry->skb->data, entry->skb->len);
-+
-+ /*
-+ * Clean up beacon skb.
-+ */
-+ dev_kfree_skb_any(entry->skb);
-+ entry->skb = NULL;
-+}
-+
-+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid queue_idx)
-+{
-+ struct data_queue *queue;
-+ unsigned int idx, qidx = 0;
-+ u32 reg;
-+
-+ if (queue_idx == QID_BEACON) {
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+ return;
-+ }
-+
-+ if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
-+ return;
-+
-+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-+ idx = queue->index[Q_INDEX];
-+
-+ if (queue_idx == QID_MGMT)
-+ qidx = 5;
-+ else
-+ qidx = queue_idx;
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
-+}
-+
-+static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid qid)
-+{
-+ u32 reg;
-+
-+ if (qid == QID_BEACON) {
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0);
-+ return;
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-+}
-+
-+/*
-+ * RX control handlers
-+ */
-+static void rt2800pci_fill_rxdone(struct queue_entry *entry,
-+ struct rxdone_entry_desc *rxdesc)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ __le32 *rxd = entry_priv->desc;
-+ __le32 *rxwi = (__le32 *)entry->skb->data;
-+ u32 rxd3;
-+ u32 rxwi0;
-+ u32 rxwi1;
-+ u32 rxwi2;
-+ u32 rxwi3;
-+
-+ rt2x00_desc_read(rxd, 3, &rxd3);
-+ rt2x00_desc_read(rxwi, 0, &rxwi0);
-+ rt2x00_desc_read(rxwi, 1, &rxwi1);
-+ rt2x00_desc_read(rxwi, 2, &rxwi2);
-+ rt2x00_desc_read(rxwi, 3, &rxwi3);
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
-+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
-+
-+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+ /*
-+ * Unfortunately we don't know the cipher type used during
-+ * decryption. This prevents us from correct providing
-+ * correct statistics through debugfs.
-+ */
-+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-+ rxdesc->cipher_status =
-+ rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
-+ }
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
-+ /*
-+ * Hardware has stripped IV/EIV data from 802.11 frame during
-+ * decryption. Unfortunately the descriptor doesn't contain
-+ * any fields with the EIV/IV data either, so they can't
-+ * be restored by rt2x00lib.
-+ */
-+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-+
-+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
-+ rxdesc->flags |= RX_FLAG_DECRYPTED;
-+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
-+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
-+ }
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
-+ rxdesc->dev_flags |= RXDONE_MY_BSS;
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
-+ rxdesc->dev_flags |= RXDONE_L2PAD;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
-+ rxdesc->flags |= RX_FLAG_SHORT_GI;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
-+ rxdesc->flags |= RX_FLAG_40MHZ;
-+
-+ /*
-+ * Detect RX rate, always use MCS as signal type.
-+ */
-+ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
-+ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
-+ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-+
-+ /*
-+ * Mask of 0x8 bit to remove the short preamble flag.
-+ */
-+ if (rxdesc->rate_mode == RATE_MODE_CCK)
-+ rxdesc->signal &= ~0x8;
-+
-+ rxdesc->rssi =
-+ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
-+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-+
-+ rxdesc->noise =
-+ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
-+ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
-+
-+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
-+
-+ /*
-+ * Set RX IDX in register to inform hardware that we have handled
-+ * this entry and it is available for reuse again.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
-+
-+ /*
-+ * Remove TXWI descriptor from start of buffer.
-+ */
-+ skb_pull(entry->skb, RXWI_DESC_SIZE);
-+ skb_trim(entry->skb, rxdesc->size);
-+}
-+
-+/*
-+ * Interrupt functions.
-+ */
-+static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+ struct queue_entry *entry;
-+ struct queue_entry *entry_done;
-+ struct queue_entry_priv_pci *entry_priv;
-+ struct txdone_entry_desc txdesc;
-+ u32 word;
-+ u32 reg;
-+ u32 old_reg;
-+ int type;
-+ int index;
-+
-+ /*
-+ * During each loop we will compare the freshly read
-+ * TX_STA_FIFO register value with the value read from
-+ * the previous loop. If the 2 values are equal then
-+ * we should stop processing because the chance it
-+ * quite big that the device has been unplugged and
-+ * we risk going into an endless loop.
-+ */
-+ old_reg = 0;
-+
-+ while (1) {
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, ®);
-+ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
-+ break;
-+
-+ if (old_reg == reg)
-+ break;
-+ old_reg = reg;
-+
-+ /*
-+ * Skip this entry when it contains an invalid
-+ * queue identication number.
-+ */
-+ type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-+ queue = rt2x00queue_get_queue(rt2x00dev, type);
-+ if (unlikely(!queue))
-+ continue;
-+
-+ /*
-+ * Skip this entry when it contains an invalid
-+ * index number.
-+ */
-+ index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-+ if (unlikely(index >= queue->limit))
-+ continue;
-+
-+ entry = &queue->entries[index];
-+ entry_priv = entry->priv_data;
-+ rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
-+
-+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+ while (entry != entry_done) {
-+ /*
-+ * Catch up.
-+ * Just report any entries we missed as failed.
-+ */
-+ WARNING(rt2x00dev,
-+ "TX status report missed for entry %d\n",
-+ entry_done->entry_idx);
-+
-+ txdesc.flags = 0;
-+ __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
-+ txdesc.retry = 0;
-+
-+ rt2x00lib_txdone(entry_done, &txdesc);
-+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+ }
-+
-+ /*
-+ * Obtain the status about this packet.
-+ */
-+ txdesc.flags = 0;
-+ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS))
-+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
-+ else
-+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
-+ txdesc.retry = rt2x00_get_field32(word, TXWI_W0_MCS);
-+
-+ rt2x00lib_txdone(entry, &txdesc);
-+ }
-+}
-+
-+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
-+{
-+ struct rt2x00_dev *rt2x00dev = dev_instance;
-+ u32 reg;
-+
-+ /* Read status and ACK all interrupts */
-+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
-+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-+
-+ if (!reg)
-+ return IRQ_NONE;
-+
-+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ return IRQ_HANDLED;
-+
-+ /*
-+ * 1 - Rx ring done interrupt.
-+ */
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
-+ rt2x00pci_rxdone(rt2x00dev);
-+
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
-+ rt2800pci_txdone(rt2x00dev);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Device probe functions.
-+ */
-+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u16 word;
-+ u8 *mac;
-+ u8 default_lna_gain;
-+
-+ /*
-+ * Read EEPROM into buffer
-+ */
-+ switch(rt2x00dev->chip.rt) {
-+ case RT2880:
-+ case RT3052:
-+ rt2800pci_read_eeprom_soc(rt2x00dev);
-+ break;
-+ default:
-+ rt2800pci_read_eeprom_pci(rt2x00dev);
-+ break;
-+ }
-+
-+ /*
-+ * Start validation of the data that has been read.
-+ */
-+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
-+ if (!is_valid_ether_addr(mac)) {
-+ DECLARE_MAC_BUF(macbuf);
-+
-+ random_ether_addr(mac);
-+ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-+ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
-+ /*
-+ * There is a max of 2 RX streams for RT2860 series
-+ */
-+ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
-+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
-+ if ((word & 0x00ff) == 0x00ff) {
-+ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
-+ LED_MODE_TXRX_ACTIVITY);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
-+ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
-+ }
-+
-+ /*
-+ * During the LNA validation we are going to use
-+ * lna0 as correct value. Note that EEPROM_LNA
-+ * is never validated.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
-+ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 value;
-+ u16 eeprom;
-+
-+ /*
-+ * Read EEPROM word for configuration.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Identify RF chipset.
-+ */
-+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
-+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
-+
-+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
-+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Identify default antenna configuration.
-+ */
-+ rt2x00dev->default_ant.tx =
-+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
-+ rt2x00dev->default_ant.rx =
-+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
-+
-+ /*
-+ * Read frequency offset and RF programming sequence.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
-+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-+
-+ /*
-+ * Read external LNA informations.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
-+ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
-+ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-+
-+ /*
-+ * Detect if this device has an hardware controlled radio.
-+ */
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
-+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-+
-+ /*
-+ * Store led settings, for correct led behaviour.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+ return 0;
-+}
-+
-+/*
-+ * RF value list for rt2860
-+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
-+ */
-+static const struct rf_channel rf_vals[] = {
-+ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
-+ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
-+ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
-+ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
-+ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
-+ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
-+ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
-+ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
-+ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
-+ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
-+ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
-+ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
-+ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
-+ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
-+
-+ /* 802.11 UNI / HyperLan 2 */
-+ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
-+ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
-+ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
-+ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
-+ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
-+ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
-+ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
-+ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
-+ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
-+ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
-+ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
-+ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
-+
-+ /* 802.11 HyperLan 2 */
-+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
-+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-+ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
-+ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
-+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
-+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
-+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
-+ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
-+ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
-+ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
-+ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
-+ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
-+ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
-+ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
-+ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
-+ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
-+
-+ /* 802.11 UNII */
-+ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
-+ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
-+ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
-+ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
-+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
-+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
-+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
-+
-+ /* 802.11 Japan */
-+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
-+ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
-+ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
-+ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
-+ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
-+ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
-+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
-+};
-+
-+static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct hw_mode_spec *spec = &rt2x00dev->spec;
-+ struct channel_info *info;
-+ char *tx_power1;
-+ char *tx_power2;
-+ unsigned int i;
-+ u16 eeprom;
-+
-+ /*
-+ * Initialize all hw fields.
-+ */
-+ rt2x00dev->hw->flags =
-+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-+ IEEE80211_HW_SIGNAL_DBM |
-+ IEEE80211_HW_SUPPORTS_PS |
-+ IEEE80211_HW_PS_NULLFUNC_STACK;
-+ rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE;
-+
-+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
-+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
-+ rt2x00_eeprom_addr(rt2x00dev,
-+ EEPROM_MAC_ADDR_0));
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Initialize hw_mode information.
-+ */
-+ spec->supported_bands = SUPPORT_BAND_2GHZ;
-+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-+
-+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2720) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF3021) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
-+ spec->num_channels = 14;
-+ spec->channels = rf_vals;
-+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2750)) {
-+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
-+ spec->num_channels = ARRAY_SIZE(rf_vals);
-+ spec->channels = rf_vals;
-+ }
-+
-+ /*
-+ * Initialize HT information.
-+ */
-+ spec->ht.ht_supported = true;
-+ spec->ht.cap =
-+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-+ IEEE80211_HT_CAP_GRN_FLD |
-+ IEEE80211_HT_CAP_SGI_20 |
-+ IEEE80211_HT_CAP_SGI_40 |
-+ IEEE80211_HT_CAP_TX_STBC |
-+ IEEE80211_HT_CAP_RX_STBC |
-+ IEEE80211_HT_CAP_PSMP_SUPPORT;
-+ spec->ht.ampdu_factor = 3;
-+ spec->ht.ampdu_density = 4;
-+ spec->ht.mcs.tx_params =
-+ IEEE80211_HT_MCS_TX_DEFINED |
-+ IEEE80211_HT_MCS_TX_RX_DIFF |
-+ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
-+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-+
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-+ case 3:
-+ spec->ht.mcs.rx_mask[2] = 0xff;
-+ case 2:
-+ spec->ht.mcs.rx_mask[1] = 0xff;
-+ case 1:
-+ spec->ht.mcs.rx_mask[0] = 0xff;
-+ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
-+ break;
-+ }
-+
-+ /*
-+ * Create channel information array
-+ */
-+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ spec->channels_info = info;
-+
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
-+
-+ for (i = 0; i < 14; i++) {
-+ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
-+ }
-+
-+ if (spec->num_channels > 14) {
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
-+
-+ for (i = 14; i < spec->num_channels; i++) {
-+ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-+{
-+ int retval;
-+
-+ /*
-+ * Allocate eeprom data.
-+ */
-+ retval = rt2800pci_validate_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ retval = rt2800pci_init_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * Initialize hw specifications.
-+ */
-+ retval = rt2800pci_probe_hw_mode(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * This device has multiple filters for control frames
-+ * and has a separate filter for PS Poll frames.
-+ */
-+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
-+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
-+
-+ /*
-+ * This device requires firmware.
-+ */
-+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
-+ !rt2x00_rt(&rt2x00dev->chip, RT3052))
-+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
-+ __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
-+ __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
-+ if (!modparam_nohwcrypt)
-+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
-+
-+ /*
-+ * Set the rssi offset.
-+ */
-+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-+
-+ return 0;
-+}
-+
-+/*
-+ * IEEE80211 stack callback functions.
-+ */
-+static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-+ u32 *iv32, u16 *iv16)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+
-+ offset = MAC_IVEIV_ENTRY(hw_key_idx);
-+ rt2x00pci_register_multiread(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-+ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-+}
-+
-+static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u32 reg;
-+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-+ const struct ieee80211_tx_queue_params *params)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct data_queue *queue;
-+ struct rt2x00_field32 field;
-+ int retval;
-+ u32 reg;
-+ u32 offset;
-+
-+ /*
-+ * First pass the configuration through rt2x00lib, that will
-+ * update the queue settings and validate the input. After that
-+ * we are free to update the registers based on the value
-+ * in the queue parameter.
-+ */
-+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * We only need to perform additional register initialization
-+ * for WMM queues/
-+ */
-+ if (queue_idx >= 4)
-+ return 0;
-+
-+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-+
-+ /* Update WMM TXOP register */
-+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-+ field.bit_offset = (queue_idx & 1) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field, queue->txop);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ /* Update WMM registers */
-+ field.bit_offset = queue_idx * 4;
-+ field.bit_mask = 0xf << field.bit_offset;
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->aifs);
-+ rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_min);
-+ rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_max);
-+ rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-+
-+ /* Update EDCA registers */
-+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ return 0;
-+}
-+
-+static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u64 tsf;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, ®);
-+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, ®);
-+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-+
-+ return tsf;
-+}
-+
-+static const struct ieee80211_ops rt2800pci_mac80211_ops = {
-+ .tx = rt2x00mac_tx,
-+ .start = rt2x00mac_start,
-+ .stop = rt2x00mac_stop,
-+ .add_interface = rt2x00mac_add_interface,
-+ .remove_interface = rt2x00mac_remove_interface,
-+ .config = rt2x00mac_config,
-+ .configure_filter = rt2x00mac_configure_filter,
-+ .set_key = rt2x00mac_set_key,
-+ .get_stats = rt2x00mac_get_stats,
-+ .get_tkip_seq = rt2800pci_get_tkip_seq,
-+ .set_rts_threshold = rt2800pci_set_rts_threshold,
-+ .bss_info_changed = rt2x00mac_bss_info_changed,
-+ .conf_tx = rt2800pci_conf_tx,
-+ .get_tx_stats = rt2x00mac_get_tx_stats,
-+ .get_tsf = rt2800pci_get_tsf,
-+ .rfkill_poll = rt2x00mac_rfkill_poll,
-+};
-+
-+static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
-+ .irq_handler = rt2800pci_interrupt,
-+ .probe_hw = rt2800pci_probe_hw,
-+ .get_firmware_name = rt2800pci_get_firmware_name,
-+ .check_firmware = rt2800pci_check_firmware,
-+ .load_firmware = rt2800pci_load_firmware,
-+ .initialize = rt2x00pci_initialize,
-+ .uninitialize = rt2x00pci_uninitialize,
-+ .get_entry_state = rt2800pci_get_entry_state,
-+ .clear_entry = rt2800pci_clear_entry,
-+ .set_device_state = rt2800pci_set_device_state,
-+ .rfkill_poll = rt2800pci_rfkill_poll,
-+ .link_stats = rt2800pci_link_stats,
-+ .reset_tuner = rt2800pci_reset_tuner,
-+ .link_tuner = rt2800pci_link_tuner,
-+ .write_tx_desc = rt2800pci_write_tx_desc,
-+ .write_tx_data = rt2x00pci_write_tx_data,
-+ .write_beacon = rt2800pci_write_beacon,
-+ .kick_tx_queue = rt2800pci_kick_tx_queue,
-+ .kill_tx_queue = rt2800pci_kill_tx_queue,
-+ .fill_rxdone = rt2800pci_fill_rxdone,
-+ .config_shared_key = rt2800pci_config_shared_key,
-+ .config_pairwise_key = rt2800pci_config_pairwise_key,
-+ .config_filter = rt2800pci_config_filter,
-+ .config_intf = rt2800pci_config_intf,
-+ .config_erp = rt2800pci_config_erp,
-+ .config_ant = rt2800pci_config_ant,
-+ .config = rt2800pci_config,
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_rx = {
-+ .entry_num = RX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = RXD_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_tx = {
-+ .entry_num = TX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = TXD_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_bcn = {
-+ .entry_num = 8 * BEACON_ENTRIES,
-+ .data_size = 0, /* No DMA required for beacons */
-+ .desc_size = TXWI_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct rt2x00_ops rt2800pci_ops = {
-+ .name = KBUILD_MODNAME,
-+ .max_sta_intf = 1,
-+ .max_ap_intf = 8,
-+ .eeprom_size = EEPROM_SIZE,
-+ .rf_size = RF_SIZE,
-+ .tx_queues = NUM_TX_QUEUES,
-+ .rx = &rt2800pci_queue_rx,
-+ .tx = &rt2800pci_queue_tx,
-+ .bcn = &rt2800pci_queue_bcn,
-+ .lib = &rt2800pci_rt2x00_ops,
-+ .hw = &rt2800pci_mac80211_ops,
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+ .debugfs = &rt2800pci_rt2x00debug,
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+};
-+
-+/*
-+ * RT2800pci module information.
-+ */
-+static struct pci_device_id rt2800pci_device_table[] = {
-+ /* Edimax */
-+ { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ /* Awt */
-+ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { 0, }
-+};
-+
-+MODULE_AUTHOR(DRV_PROJECT);
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
-+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-+#ifdef CONFIG_RT2800PCI_PCI
-+MODULE_FIRMWARE(FIRMWARE_RT2860);
-+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-+#endif /* CONFIG_RT2800PCI_PCI */
-+MODULE_LICENSE("GPL");
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+#if defined(CONFIG_RALINK_RT288X)
-+__rt2x00soc_probe(RT2880, &rt2800pci_ops);
-+#elif defined(CONFIG_RALINK_RT305X)
-+__rt2x00soc_probe(RT3052, &rt2800pci_ops);
-+#endif
-+
-+static struct platform_driver rt2800soc_driver = {
-+ .driver = {
-+ .name = "rt2800_wmac",
-+ .owner = THIS_MODULE,
-+ .mod_name = KBUILD_MODNAME,
-+ },
-+ .probe = __rt2x00soc_probe,
-+ .remove = __devexit_p(rt2x00soc_remove),
-+ .suspend = rt2x00soc_suspend,
-+ .resume = rt2x00soc_resume,
-+};
-+#endif /* CONFIG_RT2800PCI_WISOC */
-+
-+#ifdef CONFIG_RT2800PCI_PCI
-+static struct pci_driver rt2800pci_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = rt2800pci_device_table,
-+ .probe = rt2x00pci_probe,
-+ .remove = __devexit_p(rt2x00pci_remove),
-+ .suspend = rt2x00pci_suspend,
-+ .resume = rt2x00pci_resume,
-+};
-+#endif /* CONFIG_RT2800PCI_PCI */
-+
-+static int __init rt2800pci_init(void)
-+{
-+ int ret = 0;
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ ret = platform_driver_register(&rt2800soc_driver);
-+ if (ret)
-+ return ret;
-+#endif
-+#ifdef CONFIG_RT2800PCI_PCI
-+ ret = pci_register_driver(&rt2800pci_driver);
-+ if (ret) {
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ platform_driver_unregister(&rt2800soc_driver);
-+#endif
-+ return ret;
-+ }
-+#endif
-+
-+ return ret;
-+}
-+
-+static void __exit rt2800pci_exit(void)
-+{
-+#ifdef CONFIG_RT2800PCI_PCI
-+ pci_unregister_driver(&rt2800pci_driver);
-+#endif
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ platform_driver_unregister(&rt2800soc_driver);
-+#endif
-+}
-+
-+module_init(rt2800pci_init);
-+module_exit(rt2800pci_exit);
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1929 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800pci
-+ Abstract: Data structures and registers for the rt2800pci module.
-+ Supported chipsets: RT2800E & RT2800ED.
-+ */
-+
-+#ifndef RT2800PCI_H
-+#define RT2800PCI_H
-+
-+/*
-+ * RF chip defines.
-+ *
-+ * RF2820 2.4G 2T3R
-+ * RF2850 2.4G/5G 2T3R
-+ * RF2720 2.4G 1T2R
-+ * RF2750 2.4G/5G 1T2R
-+ * RF3020 2.4G 1T1R
-+ * RF2020 2.4G B/G
-+ * RF3021 2.4G 1T2R
-+ * RF3022 2.4G 2T2R
-+ */
-+#define RF2820 0x0001
-+#define RF2850 0x0002
-+#define RF2720 0x0003
-+#define RF2750 0x0004
-+#define RF3020 0x0005
-+#define RF2020 0x0006
-+#define RF3021 0x0007
-+#define RF3022 0x0008
-+
-+/*
-+ * RT2860 version
-+ */
-+#define RT2860C_VERSION 0x28600100
-+#define RT2860D_VERSION 0x28600101
-+#define RT2880E_VERSION 0x28720200
-+#define RT2883_VERSION 0x28830300
-+#define RT3070_VERSION 0x30700200
-+
-+/*
-+ * Signal information.
-+ * Default offset is required for RSSI <-> dBm conversion.
-+ */
-+#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
-+
-+/*
-+ * Register layout information.
-+ */
-+#define CSR_REG_BASE 0x1000
-+#define CSR_REG_SIZE 0x0800
-+#define EEPROM_BASE 0x0000
-+#define EEPROM_SIZE 0x0110
-+#define BBP_BASE 0x0000
-+#define BBP_SIZE 0x0080
-+#define RF_BASE 0x0004
-+#define RF_SIZE 0x0010
-+
-+/*
-+ * Number of TX queues.
-+ */
-+#define NUM_TX_QUEUES 4
-+
-+/*
-+ * PCI registers.
-+ */
-+
-+/*
-+ * E2PROM_CSR: EEPROM control register.
-+ * RELOAD: Write 1 to reload eeprom content.
-+ * TYPE: 0: 93c46, 1:93c66.
-+ * LOAD_STATUS: 1:loading, 0:done.
-+ */
-+#define E2PROM_CSR 0x0004
-+#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
-+#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
-+#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
-+#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
-+#define E2PROM_CSR_TYPE FIELD32(0x00000030)
-+#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
-+#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
-+
-+/*
-+ * HOST-MCU shared memory
-+ */
-+#define HOST_CMD_CSR 0x0404
-+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
-+
-+/*
-+ * INT_SOURCE_CSR: Interrupt source register.
-+ * Write one to clear corresponding bit.
-+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
-+ */
-+#define INT_SOURCE_CSR 0x0200
-+#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
-+#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
-+ */
-+#define INT_MASK_CSR 0x0204
-+#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
-+#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * WPDMA_GLO_CFG
-+ */
-+#define WPDMA_GLO_CFG 0x0208
-+#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
-+#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
-+#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
-+#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
-+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
-+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
-+#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
-+#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
-+#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
-+
-+/*
-+ * WPDMA_RST_IDX
-+ */
-+#define WPDMA_RST_IDX 0x020c
-+#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
-+#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
-+#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
-+#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
-+#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
-+#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
-+#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
-+
-+/*
-+ * DELAY_INT_CFG
-+ */
-+#define DELAY_INT_CFG 0x0210
-+#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
-+#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
-+#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
-+#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
-+#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
-+#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
-+
-+/*
-+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
-+ * AIFSN0: AC_BE
-+ * AIFSN1: AC_BK
-+ * AIFSN1: AC_VI
-+ * AIFSN1: AC_VO
-+ */
-+#define WMM_AIFSN_CFG 0x0214
-+#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
-+#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
-+#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
-+#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
-+ * CWMIN0: AC_BE
-+ * CWMIN1: AC_BK
-+ * CWMIN1: AC_VI
-+ * CWMIN1: AC_VO
-+ */
-+#define WMM_CWMIN_CFG 0x0218
-+#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
-+#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
-+#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
-+#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
-+ * CWMAX0: AC_BE
-+ * CWMAX1: AC_BK
-+ * CWMAX1: AC_VI
-+ * CWMAX1: AC_VO
-+ */
-+#define WMM_CWMAX_CFG 0x021c
-+#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
-+#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
-+#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
-+#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
-+
-+/*
-+ * AC_TXOP0: AC_BK/AC_BE TXOP register
-+ * AC0TXOP: AC_BK in unit of 32us
-+ * AC1TXOP: AC_BE in unit of 32us
-+ */
-+#define WMM_TXOP0_CFG 0x0220
-+#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * AC_TXOP1: AC_VO/AC_VI TXOP register
-+ * AC2TXOP: AC_VI in unit of 32us
-+ * AC3TXOP: AC_VO in unit of 32us
-+ */
-+#define WMM_TXOP1_CFG 0x0224
-+#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * GPIO_CTRL_CFG:
-+ */
-+#define GPIO_CTRL_CFG 0x0228
-+#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
-+#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
-+#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
-+#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
-+#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
-+#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
-+#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
-+#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
-+#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100)
-+
-+/*
-+ * MCU_CMD_CFG
-+ */
-+#define MCU_CMD_CFG 0x022c
-+
-+/*
-+ * AC_BK register offsets
-+ */
-+#define TX_BASE_PTR0 0x0230
-+#define TX_MAX_CNT0 0x0234
-+#define TX_CTX_IDX0 0x0238
-+#define TX_DTX_IDX0 0x023c
-+
-+/*
-+ * AC_BE register offsets
-+ */
-+#define TX_BASE_PTR1 0x0240
-+#define TX_MAX_CNT1 0x0244
-+#define TX_CTX_IDX1 0x0248
-+#define TX_DTX_IDX1 0x024c
-+
-+/*
-+ * AC_VI register offsets
-+ */
-+#define TX_BASE_PTR2 0x0250
-+#define TX_MAX_CNT2 0x0254
-+#define TX_CTX_IDX2 0x0258
-+#define TX_DTX_IDX2 0x025c
-+
-+/*
-+ * AC_VO register offsets
-+ */
-+#define TX_BASE_PTR3 0x0260
-+#define TX_MAX_CNT3 0x0264
-+#define TX_CTX_IDX3 0x0268
-+#define TX_DTX_IDX3 0x026c
-+
-+/*
-+ * HCCA register offsets
-+ */
-+#define TX_BASE_PTR4 0x0270
-+#define TX_MAX_CNT4 0x0274
-+#define TX_CTX_IDX4 0x0278
-+#define TX_DTX_IDX4 0x027c
-+
-+/*
-+ * MGMT register offsets
-+ */
-+#define TX_BASE_PTR5 0x0280
-+#define TX_MAX_CNT5 0x0284
-+#define TX_CTX_IDX5 0x0288
-+#define TX_DTX_IDX5 0x028c
-+
-+/*
-+ * Queue register offset macros
-+ */
-+#define TX_QUEUE_REG_OFFSET 0x10
-+#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+
-+/*
-+ * RX register offsets
-+ */
-+#define RX_BASE_PTR 0x0290
-+#define RX_MAX_CNT 0x0294
-+#define RX_CRX_IDX 0x0298
-+#define RX_DRX_IDX 0x029c
-+
-+/*
-+ * PBF_SYS_CTRL
-+ * HOST_RAM_WRITE: enable Host program ram write selection
-+ */
-+#define PBF_SYS_CTRL 0x0400
-+#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
-+#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define PBF_CFG 0x0408
-+#define PBF_MAX_PCNT 0x040c
-+#define PBF_CTRL 0x0410
-+#define PBF_INT_STA 0x0414
-+#define PBF_INT_ENA 0x0418
-+
-+/*
-+ * BCN_OFFSET0:
-+ */
-+#define BCN_OFFSET0 0x042c
-+#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
-+#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
-+#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
-+#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
-+
-+/*
-+ * BCN_OFFSET1:
-+ */
-+#define BCN_OFFSET1 0x0430
-+#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
-+#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
-+#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
-+#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define TXRXQ_PCNT 0x0438
-+#define PBF_DBG 0x043c
-+
-+/*
-+ * RF registers
-+ */
-+#define RF_CSR_CFG 0x0500
-+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
-+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
-+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
-+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
-+
-+/*
-+ * MAC Control/Status Registers(CSR).
-+ * Some values are set in TU, whereas 1 TU == 1024 us.
-+ */
-+
-+/*
-+ * MAC_CSR0: ASIC revision number.
-+ * ASIC_REV: 0
-+ * ASIC_VER: 2860
-+ */
-+#define MAC_CSR0 0x1000
-+#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff)
-+#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000)
-+
-+/*
-+ * MAC_SYS_CTRL:
-+ */
-+#define MAC_SYS_CTRL 0x1004
-+#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
-+#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
-+#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
-+#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
-+#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
-+#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
-+#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
-+#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
-+
-+/*
-+ * MAC_ADDR_DW0: STA MAC register 0
-+ */
-+#define MAC_ADDR_DW0 0x1008
-+#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_ADDR_DW1: STA MAC register 1
-+ * UNICAST_TO_ME_MASK:
-+ * Used to mask off bits from byte 5 of the MAC address
-+ * to determine the UNICAST_TO_ME bit for RX frames.
-+ * The full mask is complemented by BSS_ID_MASK:
-+ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
-+ */
-+#define MAC_ADDR_DW1 0x100c
-+#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
-+
-+/*
-+ * MAC_BSSID_DW0: BSSID register 0
-+ */
-+#define MAC_BSSID_DW0 0x1010
-+#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_BSSID_DW1: BSSID register 1
-+ * BSS_ID_MASK:
-+ * 0: 1-BSSID mode (BSS index = 0)
-+ * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
-+ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
-+ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
-+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
-+ * BSSID. This will make sure that those bits will be ignored
-+ * when determining the MY_BSS of RX frames.
-+ */
-+#define MAC_BSSID_DW1 0x1014
-+#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
-+#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
-+
-+/*
-+ * MAX_LEN_CFG: Maximum frame length register.
-+ * MAX_MPDU: rt2860b max 16k bytes
-+ * MAX_PSDU: Maximum PSDU length
-+ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-+ */
-+#define MAX_LEN_CFG 0x1018
-+#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
-+#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
-+#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
-+#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
-+
-+/*
-+ * BBP_CSR_CFG: BBP serial control register
-+ * VALUE: Register value to program into BBP
-+ * REG_NUM: Selected BBP register
-+ * READ_CONTROL: 0 write BBP, 1 read BBP
-+ * BUSY: ASIC is busy executing BBP commands
-+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
-+ * BBP_RW_MODE: 0 serial, 1 paralell
-+ */
-+#define BBP_CSR_CFG 0x101c
-+#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
-+#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
-+#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
-+#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
-+#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
-+#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
-+
-+/*
-+ * RF_CSR_CFG0: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * BITWIDTH: Selected RF register
-+ * STANDBYMODE: 0 high when standby, 1 low when standby
-+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
-+ * BUSY: ASIC is busy executing RF commands
-+ */
-+#define RF_CSR_CFG0 0x1020
-+#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
-+#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
-+#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
-+#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
-+#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
-+
-+/*
-+ * RF_CSR_CFG1: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG1 0x1024
-+#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
-+
-+/*
-+ * RF_CSR_CFG2: RF control register
-+ * VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG2 0x1028
-+#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
-+
-+/*
-+ * LED_CFG: LED control
-+ * color LED's:
-+ * 0: off
-+ * 1: blinking upon TX2
-+ * 2: periodic slow blinking
-+ * 3: always on
-+ * LED polarity:
-+ * 0: active low
-+ * 1: active high
-+ */
-+#define LED_CFG 0x102c
-+#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
-+#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
-+#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
-+#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
-+#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
-+#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
-+#define LED_CFG_LED_POLAR FIELD32(0x40000000)
-+
-+/*
-+ * XIFS_TIME_CFG: MAC timing
-+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
-+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
-+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
-+ * when MAC doesn't reference BBP signal BBRXEND
-+ * EIFS: unit 1us
-+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
-+ *
-+ */
-+#define XIFS_TIME_CFG 0x1100
-+#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
-+#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
-+#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
-+#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
-+#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
-+
-+/*
-+ * BKOFF_SLOT_CFG:
-+ */
-+#define BKOFF_SLOT_CFG 0x1104
-+#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
-+#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
-+
-+/*
-+ * NAV_TIME_CFG:
-+ */
-+#define NAV_TIME_CFG 0x1108
-+#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
-+#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
-+#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
-+#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
-+
-+/*
-+ * CH_TIME_CFG: count as channel busy
-+ */
-+#define CH_TIME_CFG 0x110c
-+
-+/*
-+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
-+ */
-+#define PBF_LIFE_TIMER 0x1110
-+
-+/*
-+ * BCN_TIME_CFG:
-+ * BEACON_INTERVAL: in unit of 1/16 TU
-+ * TSF_TICKING: Enable TSF auto counting
-+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-+ * BEACON_GEN: Enable beacon generator
-+ */
-+#define BCN_TIME_CFG 0x1114
-+#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
-+#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
-+#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
-+#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
-+#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
-+#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
-+
-+/*
-+ * TBTT_SYNC_CFG:
-+ */
-+#define TBTT_SYNC_CFG 0x1118
-+
-+/*
-+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW0 0x111c
-+#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW1 0x1120
-+#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TBTT_TIMER: TImer remains till next TBTT, read-only
-+ */
-+#define TBTT_TIMER 0x1124
-+
-+/*
-+ * INT_TIMER_CFG:
-+ */
-+#define INT_TIMER_CFG 0x1128
-+
-+/*
-+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
-+ */
-+#define INT_TIMER_EN 0x112c
-+
-+/*
-+ * CH_IDLE_STA: channel idle time
-+ */
-+#define CH_IDLE_STA 0x1130
-+
-+/*
-+ * CH_BUSY_STA: channel busy time
-+ */
-+#define CH_BUSY_STA 0x1134
-+
-+/*
-+ * MAC_STATUS_CFG:
-+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
-+ * if 1 or higher one of the 2 registers is busy.
-+ */
-+#define MAC_STATUS_CFG 0x1200
-+#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
-+
-+/*
-+ * PWR_PIN_CFG:
-+ */
-+#define PWR_PIN_CFG 0x1204
-+
-+/*
-+ * AUTOWAKEUP_CFG: Manual power control / status register
-+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
-+ * AUTOWAKE: 0:sleep, 1:awake
-+ */
-+#define AUTOWAKEUP_CFG 0x1208
-+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
-+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
-+#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
-+
-+/*
-+ * EDCA_AC0_CFG:
-+ */
-+#define EDCA_AC0_CFG 0x1300
-+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC1_CFG:
-+ */
-+#define EDCA_AC1_CFG 0x1304
-+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC2_CFG:
-+ */
-+#define EDCA_AC2_CFG 0x1308
-+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC3_CFG:
-+ */
-+#define EDCA_AC3_CFG 0x130c
-+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_TID_AC_MAP:
-+ */
-+#define EDCA_TID_AC_MAP 0x1310
-+
-+/*
-+ * TX_PWR_CFG_0:
-+ */
-+#define TX_PWR_CFG_0 0x1314
-+#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
-+#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
-+#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
-+#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_1:
-+ */
-+#define TX_PWR_CFG_1 0x1318
-+#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_2:
-+ */
-+#define TX_PWR_CFG_2 0x131c
-+#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_3:
-+ */
-+#define TX_PWR_CFG_3 0x1320
-+#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_4:
-+ */
-+#define TX_PWR_CFG_4 0x1324
-+#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
-+
-+/*
-+ * TX_PIN_CFG:
-+ */
-+#define TX_PIN_CFG 0x1328
-+#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
-+#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
-+#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
-+#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
-+#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
-+#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
-+#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
-+#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
-+#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
-+#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
-+#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
-+#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
-+#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
-+#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
-+#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
-+#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
-+#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
-+#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
-+#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
-+#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
-+
-+/*
-+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
-+ */
-+#define TX_BAND_CFG 0x132c
-+#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001)
-+#define TX_BAND_CFG_A FIELD32(0x00000002)
-+#define TX_BAND_CFG_BG FIELD32(0x00000004)
-+
-+/*
-+ * TX_SW_CFG0:
-+ */
-+#define TX_SW_CFG0 0x1330
-+
-+/*
-+ * TX_SW_CFG1:
-+ */
-+#define TX_SW_CFG1 0x1334
-+
-+/*
-+ * TX_SW_CFG2:
-+ */
-+#define TX_SW_CFG2 0x1338
-+
-+/*
-+ * TXOP_THRES_CFG:
-+ */
-+#define TXOP_THRES_CFG 0x133c
-+
-+/*
-+ * TXOP_CTRL_CFG:
-+ */
-+#define TXOP_CTRL_CFG 0x1340
-+
-+/*
-+ * TX_RTS_CFG:
-+ * RTS_THRES: unit:byte
-+ * RTS_FBK_EN: enable rts rate fallback
-+ */
-+#define TX_RTS_CFG 0x1344
-+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
-+#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
-+
-+/*
-+ * TX_TIMEOUT_CFG:
-+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
-+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
-+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
-+ * it is recommended that:
-+ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-+ */
-+#define TX_TIMEOUT_CFG 0x1348
-+#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
-+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
-+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
-+
-+/*
-+ * TX_RTY_CFG:
-+ * SHORT_RTY_LIMIT: short retry limit
-+ * LONG_RTY_LIMIT: long retry limit
-+ * LONG_RTY_THRE: Long retry threshoold
-+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * AGG_RTY_MODE: Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
-+ */
-+#define TX_RTY_CFG 0x134c
-+#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
-+#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
-+#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
-+#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
-+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
-+
-+/*
-+ * TX_LINK_CFG:
-+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
-+ * MFB_ENABLE: TX apply remote MFB 1:enable
-+ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
-+ * 0: not apply remote remote unsolicit (MFS=7)
-+ * TX_MRQ_EN: MCS request TX enable
-+ * TX_RDG_EN: RDG TX enable
-+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
-+ * REMOTE_MFB: remote MCS feedback
-+ * REMOTE_MFS: remote MCS feedback sequence number
-+ */
-+#define TX_LINK_CFG 0x1350
-+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
-+#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
-+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
-+#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
-+#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
-+#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
-+#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
-+#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
-+
-+/*
-+ * HT_FBK_CFG0:
-+ */
-+#define HT_FBK_CFG0 0x1354
-+#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * HT_FBK_CFG1:
-+ */
-+#define HT_FBK_CFG1 0x1358
-+#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG0:
-+ */
-+#define LG_FBK_CFG0 0x135c
-+#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
-+#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
-+#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
-+#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
-+#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG1:
-+ */
-+#define LG_FBK_CFG1 0x1360
-+#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
-+
-+/*
-+ * CCK_PROT_CFG: CCK Protection
-+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
-+ * PROTECT_CTRL: Protection control frame type for CCK TX
-+ * 0:none, 1:RTS/CTS, 2:CTS-to-self
-+ * PROTECT_NAV: TXOP protection type for CCK TX
-+ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect
-+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
-+ * RTS_TH_EN: RTS threshold enable on CCK TX
-+ */
-+#define CCK_PROT_CFG 0x1364
-+#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * OFDM_PROT_CFG: OFDM Protection
-+ */
-+#define OFDM_PROT_CFG 0x1368
-+#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM20_PROT_CFG: MM20 Protection
-+ */
-+#define MM20_PROT_CFG 0x136c
-+#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM40_PROT_CFG: MM40 Protection
-+ */
-+#define MM40_PROT_CFG 0x1370
-+#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF20_PROT_CFG: GF20 Protection
-+ */
-+#define GF20_PROT_CFG 0x1374
-+#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF40_PROT_CFG: GF40 Protection
-+ */
-+#define GF40_PROT_CFG 0x1378
-+#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * EXP_CTS_TIME:
-+ */
-+#define EXP_CTS_TIME 0x137c
-+
-+/*
-+ * EXP_ACK_TIME:
-+ */
-+#define EXP_ACK_TIME 0x1380
-+
-+/*
-+ * RX_FILTER_CFG: RX configuration register.
-+ */
-+#define RX_FILTER_CFG 0x1400
-+#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
-+#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
-+#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
-+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
-+#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
-+#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
-+#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
-+#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
-+#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
-+#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
-+#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
-+#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
-+#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
-+#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
-+#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
-+#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
-+#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
-+
-+/*
-+ * AUTO_RSP_CFG:
-+ * AUTORESPONDER: 0: disable, 1: enable
-+ * BAC_ACK_POLICY: 0:long, 1:short preamble
-+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
-+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
-+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
-+ * DUAL_CTS_EN: Power bit value in control frame
-+ * ACK_CTS_PSM_BIT:Power bit value in control frame
-+ */
-+#define AUTO_RSP_CFG 0x1404
-+#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
-+#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
-+#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
-+#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
-+#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
-+#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
-+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
-+
-+/*
-+ * LEGACY_BASIC_RATE:
-+ */
-+#define LEGACY_BASIC_RATE 0x1408
-+
-+/*
-+ * HT_BASIC_RATE:
-+ */
-+#define HT_BASIC_RATE 0x140c
-+
-+/*
-+ * HT_CTRL_CFG:
-+ */
-+#define HT_CTRL_CFG 0x1410
-+
-+/*
-+ * SIFS_COST_CFG:
-+ */
-+#define SIFS_COST_CFG 0x1414
-+
-+/*
-+ * RX_PARSER_CFG:
-+ * Set NAV for all received frames
-+ */
-+#define RX_PARSER_CFG 0x1418
-+
-+/*
-+ * TX_SEC_CNT0:
-+ */
-+#define TX_SEC_CNT0 0x1500
-+
-+/*
-+ * RX_SEC_CNT0:
-+ */
-+#define RX_SEC_CNT0 0x1504
-+
-+/*
-+ * CCMP_FC_MUTE:
-+ */
-+#define CCMP_FC_MUTE 0x1508
-+
-+/*
-+ * TXOP_HLDR_ADDR0:
-+ */
-+#define TXOP_HLDR_ADDR0 0x1600
-+
-+/*
-+ * TXOP_HLDR_ADDR1:
-+ */
-+#define TXOP_HLDR_ADDR1 0x1604
-+
-+/*
-+ * TXOP_HLDR_ET:
-+ */
-+#define TXOP_HLDR_ET 0x1608
-+
-+/*
-+ * QOS_CFPOLL_RA_DW0:
-+ */
-+#define QOS_CFPOLL_RA_DW0 0x160c
-+
-+/*
-+ * QOS_CFPOLL_RA_DW1:
-+ */
-+#define QOS_CFPOLL_RA_DW1 0x1610
-+
-+/*
-+ * QOS_CFPOLL_QC:
-+ */
-+#define QOS_CFPOLL_QC 0x1614
-+
-+/*
-+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
-+ */
-+#define RX_STA_CNT0 0x1700
-+#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
-+#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
-+ */
-+#define RX_STA_CNT1 0x1704
-+#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
-+#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT2:
-+ */
-+#define RX_STA_CNT2 0x1708
-+#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
-+#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT0: TX Beacon count
-+ */
-+#define TX_STA_CNT0 0x170c
-+#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT1: TX tx count
-+ */
-+#define TX_STA_CNT1 0x1710
-+#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
-+#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT2: TX tx count
-+ */
-+#define TX_STA_CNT2 0x1714
-+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_FIFO: TX Result for specific PID status fifo register
-+ */
-+#define TX_STA_FIFO 0x1718
-+#define TX_STA_FIFO_VALID FIELD32(0x00000001)
-+#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
-+#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
-+#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
-+#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
-+#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
-+#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT: Debug counter
-+ */
-+#define TX_AGG_CNT 0x171c
-+#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT0:
-+ */
-+#define TX_AGG_CNT0 0x1720
-+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT1:
-+ */
-+#define TX_AGG_CNT1 0x1724
-+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT2:
-+ */
-+#define TX_AGG_CNT2 0x1728
-+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT3:
-+ */
-+#define TX_AGG_CNT3 0x172c
-+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT4:
-+ */
-+#define TX_AGG_CNT4 0x1730
-+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT5:
-+ */
-+#define TX_AGG_CNT5 0x1734
-+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT6:
-+ */
-+#define TX_AGG_CNT6 0x1738
-+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT7:
-+ */
-+#define TX_AGG_CNT7 0x173c
-+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * MPDU_DENSITY_CNT:
-+ * TX_ZERO_DEL: TX zero length delimiter count
-+ * RX_ZERO_DEL: RX zero length delimiter count
-+ */
-+#define MPDU_DENSITY_CNT 0x1740
-+#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
-+#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
-+
-+/*
-+ * Security key table memory.
-+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
-+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
-+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
-+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
-+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
-+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
-+ */
-+#define MAC_WCID_BASE 0x1800
-+#define PAIRWISE_KEY_TABLE_BASE 0x4000
-+#define MAC_IVEIV_TABLE_BASE 0x6000
-+#define MAC_WCID_ATTRIBUTE_BASE 0x6800
-+#define SHARED_KEY_TABLE_BASE 0x6c00
-+#define SHARED_KEY_MODE_BASE 0x7000
-+
-+#define MAC_WCID_ENTRY(__idx) \
-+ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-+#define PAIRWISE_KEY_ENTRY(__idx) \
-+ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define MAC_IVEIV_ENTRY(__idx) \
-+ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-+#define MAC_WCID_ATTR_ENTRY(__idx) \
-+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-+#define SHARED_KEY_ENTRY(__idx) \
-+ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define SHARED_KEY_MODE_ENTRY(__idx) \
-+ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-+
-+struct mac_wcid_entry {
-+ u8 mac[6];
-+ u8 reserved[2];
-+} __attribute__ ((packed));
-+
-+struct hw_key_entry {
-+ u8 key[16];
-+ u8 tx_mic[8];
-+ u8 rx_mic[8];
-+} __attribute__ ((packed));
-+
-+struct mac_iveiv_entry {
-+ u8 iv[8];
-+} __attribute__ ((packed));
-+
-+/*
-+ * MAC_WCID_ATTRIBUTE:
-+ */
-+#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
-+#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
-+#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
-+#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
-+
-+/*
-+ * SHARED_KEY_MODE:
-+ */
-+#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
-+#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
-+#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
-+#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
-+#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
-+#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
-+#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
-+#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
-+
-+/*
-+ * HOST-MCU communication
-+ */
-+
-+/*
-+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
-+ */
-+#define H2M_MAILBOX_CSR 0x7010
-+#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
-+#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
-+#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
-+#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
-+
-+/*
-+ * H2M_MAILBOX_CID:
-+ */
-+#define H2M_MAILBOX_CID 0x7014
-+#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
-+#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
-+#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
-+#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
-+
-+/*
-+ * H2M_MAILBOX_STATUS:
-+ */
-+#define H2M_MAILBOX_STATUS 0x701c
-+
-+/*
-+ * H2M_INT_SRC:
-+ */
-+#define H2M_INT_SRC 0x7024
-+
-+/*
-+ * H2M_BBP_AGENT:
-+ */
-+#define H2M_BBP_AGENT 0x7028
-+
-+/*
-+ * MCU_LEDCS: LED control for MCU Mailbox.
-+ */
-+#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
-+#define MCU_LEDCS_POLARITY FIELD8(0x01)
-+
-+/*
-+ * HW_CS_CTS_BASE:
-+ * Carrier-sense CTS frame base address.
-+ * It's where mac stores carrier-sense frame for carrier-sense function.
-+ */
-+#define HW_CS_CTS_BASE 0x7700
-+
-+/*
-+ * HW_DFS_CTS_BASE:
-+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
-+ */
-+#define HW_DFS_CTS_BASE 0x7780
-+
-+/*
-+ * TXRX control registers - base address 0x3000
-+ */
-+
-+/*
-+ * TXRX_CSR1:
-+ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-+ */
-+#define TXRX_CSR1 0x77d0
-+
-+/*
-+ * HW_DEBUG_SETTING_BASE:
-+ * since NULL frame won't be that long (256 byte)
-+ * We steal 16 tail bytes to save debugging settings
-+ */
-+#define HW_DEBUG_SETTING_BASE 0x77f0
-+#define HW_DEBUG_SETTING_BASE2 0x7770
-+
-+/*
-+ * HW_BEACON_BASE
-+ * In order to support maximum 8 MBSS and its maximum length
-+ * is 512 bytes for each beacon
-+ * Three section discontinue memory segments will be used.
-+ * 1. The original region for BCN 0~3
-+ * 2. Extract memory from FCE table for BCN 4~5
-+ * 3. Extract memory from Pair-wise key table for BCN 6~7
-+ * It occupied those memory of wcid 238~253 for BCN 6
-+ * and wcid 222~237 for BCN 7
-+ *
-+ * IMPORTANT NOTE: Not sure why legacy driver does this,
-+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
-+ */
-+#define HW_BEACON_BASE0 0x7800
-+#define HW_BEACON_BASE1 0x7a00
-+#define HW_BEACON_BASE2 0x7c00
-+#define HW_BEACON_BASE3 0x7e00
-+#define HW_BEACON_BASE4 0x7200
-+#define HW_BEACON_BASE5 0x7400
-+#define HW_BEACON_BASE6 0x5dc0
-+#define HW_BEACON_BASE7 0x5bc0
-+
-+#define HW_BEACON_OFFSET(__index) \
-+ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-+ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-+
-+/*
-+ * 8051 firmware image.
-+ */
-+#define FIRMWARE_RT2860 "rt2860.bin"
-+#define FIRMWARE_IMAGE_BASE 0x2000
-+
-+/*
-+ * BBP registers.
-+ * The wordsize of the BBP is 8 bits.
-+ */
-+
-+/*
-+ * BBP 1: TX Antenna
-+ */
-+#define BBP1_TX_POWER FIELD8(0x07)
-+#define BBP1_TX_ANTENNA FIELD8(0x18)
-+
-+/*
-+ * BBP 3: RX Antenna
-+ */
-+#define BBP3_RX_ANTENNA FIELD8(0x18)
-+#define BBP3_HT40_PLUS FIELD8(0x20)
-+
-+/*
-+ * BBP 4: Bandwidth
-+ */
-+#define BBP4_TX_BF FIELD8(0x01)
-+#define BBP4_BANDWIDTH FIELD8(0x18)
-+
-+/*
-+ * RFCSR registers
-+ * The wordsize of the RFCSR is 8 bits.
-+ */
-+
-+/*
-+ * RFCSR 6:
-+ */
-+#define RFCSR6_R FIELD8(0x03)
-+
-+/*
-+ * RFCSR 7:
-+ */
-+#define RFCSR7_RF_TUNING FIELD8(0x01)
-+
-+/*
-+ * RFCSR 12:
-+ */
-+#define RFCSR12_TX_POWER FIELD8(0x1f)
-+
-+/*
-+ * RFCSR 22:
-+ */
-+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
-+
-+/*
-+ * RFCSR 23:
-+ */
-+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
-+
-+/*
-+ * RFCSR 30:
-+ */
-+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
-+
-+/*
-+ * RF registers
-+ */
-+
-+/*
-+ * RF 2
-+ */
-+#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
-+#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
-+#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
-+
-+/*
-+ * RF 3
-+ */
-+#define RF3_TXPOWER_G FIELD32(0x00003e00)
-+#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
-+#define RF3_TXPOWER_A FIELD32(0x00003c00)
-+
-+/*
-+ * RF 4
-+ */
-+#define RF4_TXPOWER_G FIELD32(0x000007c0)
-+#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
-+#define RF4_TXPOWER_A FIELD32(0x00000780)
-+#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
-+#define RF4_HT40 FIELD32(0x00200000)
-+
-+/*
-+ * EEPROM content.
-+ * The wordsize of the EEPROM is 16 bits.
-+ */
-+
-+/*
-+ * EEPROM Version
-+ */
-+#define EEPROM_VERSION 0x0001
-+#define EEPROM_VERSION_FAE FIELD16(0x00ff)
-+#define EEPROM_VERSION_VERSION FIELD16(0xff00)
-+
-+/*
-+ * HW MAC address.
-+ */
-+#define EEPROM_MAC_ADDR_0 0x0002
-+#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_1 0x0003
-+#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_2 0x0004
-+#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM ANTENNA config
-+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
-+ * TXPATH: 1: 1T, 2: 2T
-+ */
-+#define EEPROM_ANTENNA 0x001a
-+#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
-+#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
-+#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
-+
-+/*
-+ * EEPROM NIC config
-+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
-+ */
-+#define EEPROM_NIC 0x001b
-+#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
-+#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
-+#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
-+#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
-+#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
-+#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
-+#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
-+#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
-+#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
-+#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
-+
-+/*
-+ * EEPROM frequency
-+ */
-+#define EEPROM_FREQ 0x001d
-+#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
-+#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
-+#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
-+
-+/*
-+ * EEPROM LED
-+ * POLARITY_RDY_G: Polarity RDY_G setting.
-+ * POLARITY_RDY_A: Polarity RDY_A setting.
-+ * POLARITY_ACT: Polarity ACT setting.
-+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
-+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
-+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
-+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
-+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
-+ * LED_MODE: Led mode.
-+ */
-+#define EEPROM_LED1 0x001e
-+#define EEPROM_LED2 0x001f
-+#define EEPROM_LED3 0x0020
-+#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
-+#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
-+#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
-+#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
-+#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
-+#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
-+#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
-+#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
-+#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
-+
-+/*
-+ * EEPROM LNA
-+ */
-+#define EEPROM_LNA 0x0022
-+#define EEPROM_LNA_BG FIELD16(0x00ff)
-+#define EEPROM_LNA_A0 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG offset
-+ */
-+#define EEPROM_RSSI_BG 0x0023
-+#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG2 offset
-+ */
-+#define EEPROM_RSSI_BG2 0x0024
-+#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A offset
-+ */
-+#define EEPROM_RSSI_A 0x0025
-+#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A2 offset
-+ */
-+#define EEPROM_RSSI_A2 0x0026
-+#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
-+ * This is delta in 40MHZ.
-+ * VALUE: Tx Power dalta value (MAX=4)
-+ * TYPE: 1: Plus the delta value, 0: minus the delta value
-+ * TXPOWER: Enable:
-+ */
-+#define EEPROM_TXPOWER_DELTA 0x0028
-+#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
-+#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
-+#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
-+
-+/*
-+ * EEPROM TXPOWER 802.11BG
-+ */
-+#define EEPROM_TXPOWER_BG1 0x0029
-+#define EEPROM_TXPOWER_BG2 0x0030
-+#define EEPROM_TXPOWER_BG_SIZE 7
-+#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXPOWER 802.11A
-+ */
-+#define EEPROM_TXPOWER_A1 0x003c
-+#define EEPROM_TXPOWER_A2 0x0053
-+#define EEPROM_TXPOWER_A_SIZE 6
-+#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower byrate: 20MHZ power
-+ */
-+#define EEPROM_TXPOWER_BYRATE 0x006f
-+
-+/*
-+ * EEPROM BBP.
-+ */
-+#define EEPROM_BBP_START 0x0078
-+#define EEPROM_BBP_SIZE 16
-+#define EEPROM_BBP_VALUE FIELD16(0x00ff)
-+#define EEPROM_BBP_REG_ID FIELD16(0xff00)
-+
-+/*
-+ * MCU mailbox commands.
-+ */
-+#define MCU_SLEEP 0x30
-+#define MCU_WAKEUP 0x31
-+#define MCU_RADIO_OFF 0x35
-+#define MCU_CURRENT 0x36
-+#define MCU_LED 0x50
-+#define MCU_LED_STRENGTH 0x51
-+#define MCU_LED_1 0x52
-+#define MCU_LED_2 0x53
-+#define MCU_LED_3 0x54
-+#define MCU_RADAR 0x60
-+#define MCU_BOOT_SIGNAL 0x72
-+#define MCU_BBP_SIGNAL 0x80
-+#define MCU_POWER_SAVE 0x83
-+
-+/*
-+ * MCU mailbox tokens
-+ */
-+#define TOKEN_WAKUP 3
-+
-+/*
-+ * DMA descriptor defines.
-+ */
-+#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define RXD_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+
-+/*
-+ * TX descriptor format for TX, PRIO and Beacon Ring.
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
-+
-+/*
-+ * Word1
-+ */
-+#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
-+#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
-+#define TXD_W1_BURST FIELD32(0x00008000)
-+#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
-+#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
-+#define TXD_W1_DMA_DONE FIELD32(0x80000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
-+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
-+ * 0:MGMT, 1:HCCA 2:EDCA
-+ */
-+#define TXD_W3_WIV FIELD32(0x01000000)
-+#define TXD_W3_QSEL FIELD32(0x06000000)
-+#define TXD_W3_TCO FIELD32(0x20000000)
-+#define TXD_W3_UCO FIELD32(0x40000000)
-+#define TXD_W3_ICO FIELD32(0x80000000)
-+
-+/*
-+ * TX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ * FRAG: 1 To inform TKIP engine this is a fragment.
-+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
-+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
-+ * BW: Channel bandwidth 20MHz or 40 MHz
-+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
-+ */
-+#define TXWI_W0_FRAG FIELD32(0x00000001)
-+#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
-+#define TXWI_W0_CF_ACK FIELD32(0x00000004)
-+#define TXWI_W0_TS FIELD32(0x00000008)
-+#define TXWI_W0_AMPDU FIELD32(0x00000010)
-+#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
-+#define TXWI_W0_TX_OP FIELD32(0x00000300)
-+#define TXWI_W0_MCS FIELD32(0x007f0000)
-+#define TXWI_W0_BW FIELD32(0x00800000)
-+#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
-+#define TXWI_W0_STBC FIELD32(0x06000000)
-+#define TXWI_W0_IFS FIELD32(0x08000000)
-+#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define TXWI_W1_ACK FIELD32(0x00000001)
-+#define TXWI_W1_NSEQ FIELD32(0x00000002)
-+#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
-+#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
-+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define TXWI_W1_PACKETID FIELD32(0xf0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXWI_W2_IV FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ */
-+#define TXWI_W3_EIV FIELD32(0xffffffff)
-+
-+/*
-+ * RX descriptor format for RX Ring.
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define RXD_W0_SDP0 FIELD32(0xffffffff)
-+
-+/*
-+ * Word1
-+ */
-+#define RXD_W1_SDL1 FIELD32(0x00003fff)
-+#define RXD_W1_SDL0 FIELD32(0x3fff0000)
-+#define RXD_W1_LS0 FIELD32(0x40000000)
-+#define RXD_W1_DMA_DONE FIELD32(0x80000000)
-+
-+/*
-+ * Word2
-+ */
-+#define RXD_W2_SDP1 FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ * AMSDU: RX with 802.3 header, not 802.11 header.
-+ * DECRYPTED: This frame is being decrypted.
-+ */
-+#define RXD_W3_BA FIELD32(0x00000001)
-+#define RXD_W3_DATA FIELD32(0x00000002)
-+#define RXD_W3_NULLDATA FIELD32(0x00000004)
-+#define RXD_W3_FRAG FIELD32(0x00000008)
-+#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010)
-+#define RXD_W3_MULTICAST FIELD32(0x00000020)
-+#define RXD_W3_BROADCAST FIELD32(0x00000040)
-+#define RXD_W3_MY_BSS FIELD32(0x00000080)
-+#define RXD_W3_CRC_ERROR FIELD32(0x00000100)
-+#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600)
-+#define RXD_W3_AMSDU FIELD32(0x00000800)
-+#define RXD_W3_HTC FIELD32(0x00001000)
-+#define RXD_W3_RSSI FIELD32(0x00002000)
-+#define RXD_W3_L2PAD FIELD32(0x00004000)
-+#define RXD_W3_AMPDU FIELD32(0x00008000)
-+#define RXD_W3_DECRYPTED FIELD32(0x00010000)
-+#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000)
-+#define RXD_W3_PLCP_RSSI FIELD32(0x00040000)
-+
-+/*
-+ * RX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
-+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
-+#define RXWI_W0_BSSID FIELD32(0x00001c00)
-+#define RXWI_W0_UDF FIELD32(0x0000e000)
-+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define RXWI_W0_TID FIELD32(0xf0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define RXWI_W1_FRAG FIELD32(0x0000000f)
-+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
-+#define RXWI_W1_MCS FIELD32(0x007f0000)
-+#define RXWI_W1_BW FIELD32(0x00800000)
-+#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
-+#define RXWI_W1_STBC FIELD32(0x06000000)
-+#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
-+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
-+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
-+
-+/*
-+ * Word3
-+ */
-+#define RXWI_W3_SNR0 FIELD32(0x000000ff)
-+#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
-+
-+/*
-+ * Macros for converting txpower from EEPROM to mac80211 value
-+ * and from mac80211 value to register value.
-+ */
-+#define MIN_G_TXPOWER 0
-+#define MIN_A_TXPOWER -7
-+#define MAX_G_TXPOWER 31
-+#define MAX_A_TXPOWER 15
-+#define DEFAULT_TXPOWER 5
-+
-+#define TXPOWER_G_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_G_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-+
-+#define TXPOWER_A_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_A_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-+
-+#endif /* RT2800PCI_H */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -158,6 +158,12 @@ struct rt2x00_chip {
- #define RT2561 0x0302
- #define RT2661 0x0401
- #define RT2571 0x1300
-+#define RT2860 0x0601 /* 2.4GHz PCI/CB */
-+#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */
-+#define RT2890 0x0701 /* 2.4GHz PCIe */
-+#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
-+#define RT2880 0x2880 /* WSOC */
-+#define RT3052 0x3052 /* WSOC */
- #define RT2870 0x1600
-
- u16 rf;
projects / openwrt / staging / yousong.git / commitdiff