remove 2.6.32 support
authorFlorian Fainelli <florian@openwrt.org>
Sun, 17 Oct 2010 16:32:35 +0000 (16:32 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Sun, 17 Oct 2010 16:32:35 +0000 (16:32 +0000)
SVN-Revision: 23505

30 files changed:
target/linux/brcm63xx/config-2.6.32 [deleted file]
target/linux/brcm63xx/patches-2.6.32/007-usb-ohci-support.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/008-usb-ehci-support.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/009-fix-double-gpio-registration.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/010-add_bcm63xx_ohci_controller.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/011-add_bcm63xx_ehci_controller.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/012-mips_add_readl_writel_be_accessors.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/020-watchdog.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/040-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/070_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/100-reset_buttons.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/110-gpiodev.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/120-board_rta1025w_16.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/130-board_DWVS0.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/140-new_bcm96348gw_leds.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/150-alice_gate2_leds.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/160-fix_gpio_count.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/170-board_livebox.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/180-udc_preliminary_support.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/190-typo_cpu_features_override.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/200-extended-platform-devices.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/210-init_gpio_out_low_high_current_value_at_boot.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/211-nxp-74hc164-gpio-chip-driver.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/220-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/221-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/230-external_phy_fix.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/240-spi.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/250-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/260-no_ehci_over_current_check.patch [deleted file]
target/linux/brcm63xx/patches-2.6.32/300-wl_exports.patch [deleted file]

diff --git a/target/linux/brcm63xx/config-2.6.32 b/target/linux/brcm63xx/config-2.6.32
deleted file mode 100644 (file)
index 5512728..0000000
+++ /dev/null
@@ -1,199 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-# CONFIG_BCM47XX is not set
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BITREVERSE=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRAMFS=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_NXP_74HC164=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM963XX=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_RELAY=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-2.6.32/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-2.6.32/007-usb-ohci-support.patch
deleted file mode 100644 (file)
index 90f3e9f..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-The bcm63xx SOC has an integrated OHCI controller, this patch adds
-platform device registration and change board code to register ohci
-device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig                          |    6 ++
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 5 files changed, 67 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
- config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select HW_HAS_PCI
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC
-+      select USB_OHCI_BIG_ENDIAN_MMIO
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select HW_HAS_PCI
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC
-+      select USB_OHCI_BIG_ENDIAN_MMIO
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,5 +1,6 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
--                 dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
-+                 dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-+                 dev-usb-ohci.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -24,6 +24,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <board_bcm963xx.h>
- #define PFX   "board_bcm963xx: "
-@@ -804,6 +805,9 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              /* start & end filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              /* start filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "bcm63xx_ohci",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = 0xffffffff,
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
-+              return 0;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.32/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-2.6.32/008-usb-ehci-support.patch
deleted file mode 100644 (file)
index 45584e4..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
-The bcm63xx SOC has an integrated EHCI controller, this patch adds
-platform device registration and change board code to register
-EHCI device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig                          |    2 +
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 5 files changed, 62 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
-       select USB_ARCH_HAS_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC
-       select USB_OHCI_BIG_ENDIAN_MMIO
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_MMIO
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o
-+                 dev-usb-ohci.o dev-usb-ehci.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
- #define PFX   "board_bcm963xx: "
-@@ -805,6 +806,9 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              /* start & end filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              /* start filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "bcm63xx_ehci",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = 0xffffffff,
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6358())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.32/009-fix-double-gpio-registration.patch b/target/linux/brcm63xx/patches-2.6.32/009-fix-double-gpio-registration.patch
deleted file mode 100644 (file)
index 56b44ee..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-bcm63xx_gpio_init is already called from prom_init to allow board to
-use them early, so we can remove the unneeded arch_initcall.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/gpio.c |    2 --
- 1 files changed, 0 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -130,5 +130,3 @@ int __init bcm63xx_gpio_init(void)
-       return gpiochip_add(&bcm63xx_gpio_chip);
- }
--
--arch_initcall(bcm63xx_gpio_init);
diff --git a/target/linux/brcm63xx/patches-2.6.32/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-2.6.32/010-add_bcm63xx_ohci_controller.patch
deleted file mode 100644 (file)
index 49e6ea1..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ohci-bcm63xx.c |  166 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c     |    5 +
- drivers/usb/host/ohci.h         |    2 +-
- 3 files changed, 172 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -0,0 +1,166 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
-+{
-+      struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+      int ret;
-+
-+        /*
-+         * port 2 can be shared with USB slave, but all boards seem to
-+         * have only one host port populated, so we can hardcode it
-+         */
-+      ohci->num_ports = 1;
-+
-+      ret = ohci_init(ohci);
-+      if (ret < 0)
-+              return ret;
-+
-+      ret = ohci_run(ohci);
-+      if (ret < 0) {
-+              err("can't start %s", hcd->self.bus_name);
-+              ohci_stop(hcd);
-+              return ret;
-+      }
-+      return 0;
-+}
-+
-+static const struct hc_driver ohci_bcm63xx_hc_driver = {
-+      .description =          hcd_name,
-+      .product_desc =         "BCM63XX integrated OHCI controller",
-+      .hcd_priv_size =        sizeof(struct ohci_hcd),
-+
-+      .irq =                  ohci_irq,
-+      .flags =                HCD_USB11 | HCD_MEMORY,
-+      .start =                ohci_bcm63xx_start,
-+      .stop =                 ohci_stop,
-+      .shutdown =             ohci_shutdown,
-+      .urb_enqueue =          ohci_urb_enqueue,
-+      .urb_dequeue =          ohci_urb_dequeue,
-+      .endpoint_disable =     ohci_endpoint_disable,
-+      .get_frame_number =     ohci_get_frame,
-+      .hub_status_data =      ohci_hub_status_data,
-+      .hub_control =          ohci_hub_control,
-+      .start_port_reset =     ohci_start_port_reset,
-+};
-+
-+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+      struct resource *res_mem;
-+      struct usb_hcd *hcd;
-+      struct ohci_hcd *ohci;
-+      u32 reg;
-+      int ret, irq;
-+
-+      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      irq = platform_get_irq(pdev, 0);
-+      if (!res_mem || irq < 0)
-+              return -ENODEV;
-+
-+      if (BCMCPU_IS_6348()) {
-+              struct clk *clk;
-+              /* enable USB host clock */
-+              clk = clk_get(&pdev->dev, "usbh");
-+              if (IS_ERR(clk))
-+                      return -ENODEV;
-+
-+              clk_enable(clk);
-+              usb_host_clock = clk;
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+
-+      } else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+      } else
-+              return 0;
-+
-+      hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+      if (!hcd)
-+              return -ENOMEM;
-+      hcd->rsrc_start = res_mem->start;
-+      hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+      if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+              pr_debug("request_mem_region failed\n");
-+              ret = -EBUSY;
-+              goto out;
-+      }
-+
-+      hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+      if (!hcd->regs) {
-+              pr_debug("ioremap failed\n");
-+              ret = -EIO;
-+              goto out1;
-+      }
-+
-+      ohci = hcd_to_ohci(hcd);
-+      ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
-+              OHCI_QUIRK_FRAME_NO;
-+      ohci_hcd_init(ohci);
-+
-+      ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+      if (ret)
-+              goto out2;
-+
-+      platform_set_drvdata(pdev, hcd);
-+      return 0;
-+
-+out2:
-+      iounmap(hcd->regs);
-+out1:
-+      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+      usb_put_hcd(hcd);
-+      return ret;
-+}
-+
-+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+      struct usb_hcd *hcd;
-+
-+      hcd = platform_get_drvdata(pdev);
-+      usb_remove_hcd(hcd);
-+      iounmap(hcd->regs);
-+      usb_put_hcd(hcd);
-+      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+      if (usb_host_clock) {
-+              clk_disable(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+      platform_set_drvdata(pdev, NULL);
-+      return 0;
-+}
-+
-+static struct platform_driver ohci_hcd_bcm63xx_driver = {
-+      .probe          = ohci_hcd_bcm63xx_drv_probe,
-+      .remove         = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
-+      .shutdown       = usb_hcd_platform_shutdown,
-+      .driver         = {
-+              .name   = "bcm63xx_ohci",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ohci");
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1051,6 +1051,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER               usb_hcd_pnx4008_driver
- #endif
-+#ifdef CONFIG_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER               ohci_hcd_bcm63xx_driver
-+#endif
-+
- #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7763) || \
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -655,7 +655,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci)       (ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)       0
diff --git a/target/linux/brcm63xx/patches-2.6.32/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.32/011-add_bcm63xx_ehci_controller.patch
deleted file mode 100644 (file)
index a3f25dc..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ehci-bcm63xx.c |  154 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c     |    5 +
- 2 files changed, 159 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -0,0 +1,154 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
-+{
-+      struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+      int retval;
-+
-+      retval = ehci_halt(ehci);
-+      if (retval)
-+              return retval;
-+
-+      retval = ehci_init(hcd);
-+      if (retval)
-+              return retval;
-+
-+      ehci_reset(ehci);
-+      ehci_port_power(ehci, 0);
-+
-+      return retval;
-+}
-+
-+
-+static const struct hc_driver ehci_bcm63xx_hc_driver = {
-+      .description =          hcd_name,
-+      .product_desc =         "BCM63XX integrated EHCI controller",
-+      .hcd_priv_size =        sizeof(struct ehci_hcd),
-+
-+      .irq =                  ehci_irq,
-+      .flags =                HCD_MEMORY | HCD_USB2,
-+
-+      .reset =                ehci_bcm63xx_setup,
-+      .start =                ehci_run,
-+      .stop =                 ehci_stop,
-+      .shutdown =             ehci_shutdown,
-+
-+      .urb_enqueue =          ehci_urb_enqueue,
-+      .urb_dequeue =          ehci_urb_dequeue,
-+      .endpoint_disable =     ehci_endpoint_disable,
-+
-+      .get_frame_number =     ehci_get_frame,
-+
-+      .hub_status_data =      ehci_hub_status_data,
-+      .hub_control =          ehci_hub_control,
-+      .bus_suspend =          ehci_bus_suspend,
-+      .bus_resume =           ehci_bus_resume,
-+      .relinquish_port =      ehci_relinquish_port,
-+      .port_handed_over =     ehci_port_handed_over,
-+};
-+
-+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+      struct resource *res_mem;
-+      struct usb_hcd *hcd;
-+      struct ehci_hcd *ehci;
-+      u32 reg;
-+      int ret, irq;
-+
-+      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      irq = platform_get_irq(pdev, 0);;
-+      if (!res_mem || irq < 0)
-+              return -ENODEV;
-+
-+      reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+      reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+      reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+
-+      /*
-+       * The magic value comes for the original vendor BSP and is
-+       * needed for USB to work. Datasheet does not help, so the
-+       * magic value is used as-is.
-+       */
-+      bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+
-+      hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+      if (!hcd)
-+              return -ENOMEM;
-+      hcd->rsrc_start = res_mem->start;
-+      hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+      if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+              pr_debug("request_mem_region failed\n");
-+              ret = -EBUSY;
-+              goto out;
-+      }
-+
-+      hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+      if (!hcd->regs) {
-+              pr_debug("ioremap failed\n");
-+              ret = -EIO;
-+              goto out1;
-+      }
-+
-+      ehci = hcd_to_ehci(hcd);
-+      ehci->big_endian_mmio = 1;
-+      ehci->big_endian_desc = 0;
-+      ehci->caps = hcd->regs;
-+      ehci->regs = hcd->regs +
-+              HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+      ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      ehci->sbrn = 0x20;
-+
-+      ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+      if (ret)
-+              goto out2;
-+
-+      platform_set_drvdata(pdev, hcd);
-+      return 0;
-+
-+out2:
-+      iounmap(hcd->regs);
-+out1:
-+      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+      usb_put_hcd(hcd);
-+      return ret;
-+}
-+
-+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+      struct usb_hcd *hcd;
-+
-+      hcd = platform_get_drvdata(pdev);
-+      usb_remove_hcd(hcd);
-+      iounmap(hcd->regs);
-+      usb_put_hcd(hcd);
-+      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+      platform_set_drvdata(pdev, NULL);
-+      return 0;
-+}
-+
-+static struct platform_driver ehci_hcd_bcm63xx_driver = {
-+      .probe          = ehci_hcd_bcm63xx_drv_probe,
-+      .remove         = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
-+      .shutdown       = usb_hcd_platform_shutdown,
-+      .driver         = {
-+              .name   = "bcm63xx_ehci",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ehci");
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1142,6 +1142,11 @@ MODULE_LICENSE ("GPL");
- #define       PLATFORM_DRIVER         ehci_atmel_driver
- #endif
-+#ifdef CONFIG_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define       PLATFORM_DRIVER         ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
diff --git a/target/linux/brcm63xx/patches-2.6.32/012-mips_add_readl_writel_be_accessors.patch b/target/linux/brcm63xx/patches-2.6.32/012-mips_add_readl_writel_be_accessors.patch
deleted file mode 100644 (file)
index 71b715d..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-MIPS currently lacks the readl_be and writel_be accessors
-which are required by BCM63xx for OHCI and EHCI support.
-Let's define them globally for MIPS. This also fixes the
-compilation of the bcm63xx defconfig against USB.
-
-Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
----
---- a/arch/mips/include/asm/io.h
-+++ b/arch/mips/include/asm/io.h
-@@ -447,6 +447,9 @@ __BUILDIO(q, u64)
- #define readl_relaxed                 readl
- #define readq_relaxed                 readq
-+#define readl_be(addr)                        be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
-+#define writel_be(val, addr)          __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
-+
- /*
-  * Some code tests for these symbols
-  */
diff --git a/target/linux/brcm63xx/patches-2.6.32/020-watchdog.patch b/target/linux/brcm63xx/patches-2.6.32/020-watchdog.patch
deleted file mode 100644 (file)
index 511bce7..0000000
+++ /dev/null
@@ -1,386 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- # PARISC Architecture
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -850,6 +850,16 @@ config TXX9_WDT
-       help
-         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-+config BCM63XX_WDT
-+      tristate "Broadcom BCM63xx hardware watchdog"
-+      depends on BCM63XX
-+      help
-+        Watchdog driver for the built in watchdog hardware in Broadcom
-+        BCM63xx SoC.
-+
-+        To compile thi driver as a loadable module, choose M here.
-+        The module will be called bcm63xx_wdt.
-+
- # PARISC Architecture
- # POWERPC Architecture
---- /dev/null
-+++ b/drivers/watchdog/bcm63xx_wdt.c
-@@ -0,0 +1,354 @@
-+/*
-+ *  Broadcom BCM63xx SoC watchdog driver
-+ *
-+ *  Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com>
-+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version
-+ *  2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/reboot.h>
-+#include <linux/types.h>
-+#include <linux/uaccess.h>
-+#include <linux/watchdog.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/resource.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_timer.h>
-+
-+#define PFX KBUILD_MODNAME
-+
-+#define WDT_HZ                50000000 /* Fclk */
-+#define WDT_DEFAULT_TIME      30      /* seconds */
-+#define WDT_MAX_TIME          256     /* seconds */
-+
-+static struct {
-+      void __iomem *regs;
-+      struct timer_list timer;
-+      int default_ticks;
-+      unsigned long inuse;
-+      atomic_t ticks;
-+} bcm63xx_wdt_device;
-+
-+static int expect_close;
-+
-+static int wdt_time = WDT_DEFAULT_TIME;
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-+      __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+/* HW functions */
-+static void bcm63xx_wdt_hw_start(void)
-+{
-+      bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG);
-+      bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+      bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+}
-+
-+static void bcm63xx_wdt_hw_stop(void)
-+{
-+      bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+      bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+}
-+
-+static void bcm63xx_wdt_isr(void *data)
-+{
-+      struct pt_regs *regs = get_irq_regs();
-+
-+      die(PFX " fire", regs);
-+}
-+
-+static void bcm63xx_timer_tick(unsigned long unused)
-+{
-+      if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) {
-+              bcm63xx_wdt_hw_start();
-+              mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ);
-+      } else
-+              printk(KERN_CRIT PFX ": watchdog will restart system\n");
-+}
-+
-+static void bcm63xx_wdt_pet(void)
-+{
-+      atomic_set(&bcm63xx_wdt_device.ticks, wdt_time);
-+}
-+
-+static void bcm63xx_wdt_start(void)
-+{
-+      bcm63xx_wdt_pet();
-+      bcm63xx_timer_tick(0);
-+}
-+
-+static void bcm63xx_wdt_pause(void)
-+{
-+      del_timer_sync(&bcm63xx_wdt_device.timer);
-+      bcm63xx_wdt_hw_stop();
-+}
-+
-+static int bcm63xx_wdt_settimeout(int new_time)
-+{
-+      if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+              return -EINVAL;
-+
-+      wdt_time = new_time;
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_wdt_open(struct inode *inode, struct file *file)
-+{
-+      if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse))
-+              return -EBUSY;
-+
-+      bcm63xx_wdt_start();
-+      return nonseekable_open(inode, file);
-+}
-+
-+static int bcm63xx_wdt_release(struct inode *inode, struct file *file)
-+{
-+      if (expect_close == 42)
-+              bcm63xx_wdt_pause();
-+      else {
-+              printk(KERN_CRIT PFX
-+                      ": Unexpected close, not stopping watchdog!\n");
-+              bcm63xx_wdt_start();
-+      }
-+      clear_bit(0, &bcm63xx_wdt_device.inuse);
-+      expect_close = 0;
-+      return 0;
-+}
-+
-+static ssize_t bcm63xx_wdt_write(struct file *file, const char *data,
-+                              size_t len, loff_t *ppos)
-+{
-+      if (len) {
-+              if (!nowayout) {
-+                      size_t i;
-+
-+                      /* In case it was set long ago */
-+                      expect_close = 0;
-+
-+                      for (i = 0; i != len; i++) {
-+                              char c;
-+                              if (get_user(c, data + i))
-+                                      return -EFAULT;
-+                              if (c == 'V')
-+                                      expect_close = 42;
-+                      }
-+              }
-+              bcm63xx_wdt_pet();
-+      }
-+      return len;
-+}
-+
-+static struct watchdog_info bcm63xx_wdt_info = {
-+      .identity       = PFX,
-+      .options        = WDIOF_SETTIMEOUT |
-+                              WDIOF_KEEPALIVEPING |
-+                              WDIOF_MAGICCLOSE,
-+};
-+
-+
-+static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
-+                              unsigned long arg)
-+{
-+      void __user *argp = (void __user *)arg;
-+      int __user *p = argp;
-+      int new_value, retval = -EINVAL;
-+
-+      switch (cmd) {
-+      case WDIOC_GETSUPPORT:
-+              return copy_to_user(argp, &bcm63xx_wdt_info,
-+                      sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0;
-+
-+      case WDIOC_GETSTATUS:
-+      case WDIOC_GETBOOTSTATUS:
-+              return put_user(0, p);
-+
-+      case WDIOC_SETOPTIONS:
-+              if (get_user(new_value, p))
-+                      return -EFAULT;
-+
-+              if (new_value & WDIOS_DISABLECARD) {
-+                      bcm63xx_wdt_pause();
-+                      retval = 0;
-+              }
-+              if (new_value & WDIOS_ENABLECARD) {
-+                      bcm63xx_wdt_start();
-+                      retval = 0;
-+              }
-+
-+              return retval;
-+
-+      case WDIOC_KEEPALIVE:
-+              bcm63xx_wdt_pet();
-+              return 0;
-+
-+      case WDIOC_SETTIMEOUT:
-+              if (get_user(new_value, p))
-+                      return -EFAULT;
-+
-+              if (bcm63xx_wdt_settimeout(new_value))
-+                      return -EINVAL;
-+
-+              bcm63xx_wdt_pet();
-+
-+      case WDIOC_GETTIMEOUT:
-+              return put_user(wdt_time, p);
-+
-+      default:
-+              return -ENOTTY;
-+
-+      }
-+}
-+
-+static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
-+                              unsigned long code, void *unused)
-+{
-+      if (code == SYS_DOWN || code == SYS_HALT)
-+              bcm63xx_wdt_pause();
-+      return NOTIFY_DONE;
-+}
-+
-+static const struct file_operations bcm63xx_wdt_fops = {
-+      .owner          = THIS_MODULE,
-+      .llseek         = no_llseek,
-+      .write          = bcm63xx_wdt_write,
-+      .unlocked_ioctl = bcm63xx_wdt_ioctl,
-+      .open           = bcm63xx_wdt_open,
-+      .release        = bcm63xx_wdt_release,
-+};
-+
-+static struct miscdevice bcm63xx_wdt_miscdev = {
-+      .minor  = WATCHDOG_MINOR,
-+      .name   = "watchdog",
-+      .fops   = &bcm63xx_wdt_fops,
-+};
-+
-+static struct notifier_block bcm63xx_wdt_notifier = {
-+      .notifier_call = bcm63xx_wdt_notify_sys,
-+};
-+
-+
-+static int bcm63xx_wdt_probe(struct platform_device *pdev)
-+{
-+      int ret;
-+      struct resource *r;
-+
-+      setup_timer(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0L);
-+
-+      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      if (!r) {
-+              printk(KERN_ERR PFX
-+                      "failed to retrieve resources\n");
-+              return -ENODEV;
-+      }
-+
-+      bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start);
-+      if (!bcm63xx_wdt_device.regs) {
-+              printk(KERN_ERR PFX
-+                      "failed to remap I/O resources\n");
-+              return -ENXIO;
-+      }
-+
-+      ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL);
-+      if (ret < 0) {
-+              printk(KERN_ERR PFX
-+                      "failed to register wdt timer isr\n");
-+              goto unmap;
-+      }
-+
-+      if (bcm63xx_wdt_settimeout(wdt_time)) {
-+              bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME);
-+              printk(KERN_INFO PFX
-+                      ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
-+                      wdt_time);
-+      }
-+
-+      ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
-+      if (ret) {
-+              printk(KERN_ERR PFX
-+                      "failed to register reboot_notifier\n");
-+              goto unregister_timer;
-+      }
-+
-+      ret = misc_register(&bcm63xx_wdt_miscdev);
-+      if (ret < 0) {
-+              printk(KERN_ERR PFX
-+                      "failed to register watchdog device\n");
-+              goto unregister_reboot_notifier;
-+      }
-+
-+      printk(KERN_INFO PFX " started, timer margin: %d sec\n", WDT_DEFAULT_TIME);
-+
-+      return 0;
-+
-+unregister_reboot_notifier:
-+      unregister_reboot_notifier(&bcm63xx_wdt_notifier);
-+unregister_timer:
-+      bcm63xx_timer_unregister(TIMER_WDT_ID);
-+unmap:
-+      iounmap(bcm63xx_wdt_device.regs);
-+      return ret;
-+}
-+
-+static int bcm63xx_wdt_remove(struct platform_device *pdev)
-+{
-+      if (!nowayout)
-+              bcm63xx_wdt_pause();
-+
-+      misc_deregister(&bcm63xx_wdt_miscdev);
-+
-+      iounmap(bcm63xx_wdt_device.regs);
-+
-+      unregister_reboot_notifier(&bcm63xx_wdt_notifier);
-+      bcm63xx_timer_unregister(TIMER_WDT_ID);
-+
-+      return 0;
-+}
-+
-+static struct platform_driver bcm63xx_wdt = {
-+      .probe  = bcm63xx_wdt_probe,
-+      .remove = bcm63xx_wdt_remove,
-+      .driver = {
-+              .name = "bcm63xx-wdt",
-+      }
-+};
-+
-+static int __init bcm63xx_wdt_init(void)
-+{
-+      return platform_driver_register(&bcm63xx_wdt);
-+}
-+
-+static void __exit bcm63xx_wdt_exit(void)
-+{
-+      platform_driver_unregister(&bcm63xx_wdt);
-+}
-+
-+module_init(bcm63xx_wdt_init);
-+module_exit(bcm63xx_wdt_exit);
-+
-+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:bcm63xx-wdt");
diff --git a/target/linux/brcm63xx/patches-2.6.32/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.32/040-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index 812e008..0000000
+++ /dev/null
@@ -1,379 +0,0 @@
-From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- drivers/mtd/maps/Kconfig  |    7 +++++++
- drivers/mtd/maps/Makefile |    1 +
- drivers/mtd/redboot.c     |   13 ++++++++++---
- 3 files changed, 18 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -259,6 +259,13 @@ config MTD_ALCHEMY
-       help
-         Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-+config MTD_BCM963XX
-+        tristate "BCM963xx Flash device"
-+        depends on MIPS && BCM63XX
-+        help
-+        Flash memory access on BCM963xx boards. Currently only works with
-+        RedBoot and CFE.
-+
- config MTD_DILNETPC
-       tristate "CFI Flash device mapped on DIL/Net PC"
-       depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
-       return 1;
- }
--static int parse_redboot_partitions(struct mtd_info *master,
-+int parse_redboot_partitions(struct mtd_info *master,
-                              struct mtd_partition **pparts,
-                              unsigned long fis_origin)
- {
-@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (!fis_origin) {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
-               new_fl->img = &buf[i];
-                 if (fis_origin) {
-                         buf[i].flash_base -= fis_origin;
--                } else {
--                        buf[i].flash_base &= master->size-1;
-                 }
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy
- obj-$(CONFIG_MTD_RBTX4939)    += rbtx4939-flash.o
- obj-$(CONFIG_MTD_VMU)         += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR)   += gpio-addr-flash.o
-+obj-$(CONFIG_MTD_BCM963XX)    += bcm963xx-flash.o
---- /dev/null
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -0,0 +1,266 @@
-+/*
-+ * Copyright (C) 2006-2008  Florian Fainelli <florian@openwrt.org>
-+ *                        Mike Albon <malbon@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/vmalloc.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm_tag.h>
-+#include <asm/io.h>
-+
-+#define BUSWIDTH 2                     /* Buswidth */
-+#define EXTENDED_SIZE 0xBFC00000       /* Extended flash address */
-+
-+#define PFX KBUILD_MODNAME ": "
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
-+static struct mtd_partition *parsed_parts;
-+
-+static struct mtd_info *bcm963xx_mtd_info;
-+
-+static struct map_info bcm963xx_map = {
-+       .name          = "bcm963xx",
-+       .bankwidth     = BUSWIDTH,
-+};
-+
-+
-+static int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts)
-+{
-+      int nrparts = 3, curpart = 0; /* CFE,NVRAM and global LINUX are always present. */
-+      struct bcm_tag *buf;
-+      struct mtd_partition *parts;
-+      int ret;
-+      size_t retlen;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr;
-+      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int namelen = 0;
-+      int i;
-+      char *boardid;
-+        char *tagversion;
-+
-+      /* Allocate memory for buffer */
-+      buf = vmalloc(sizeof(struct bcm_tag));
-+      if (!buf)
-+              return -ENOMEM;
-+
-+      /* Get the tag */
-+      ret = master->read(master,master->erasesize,sizeof(struct bcm_tag), &retlen, (void *)buf);
-+      if (retlen != sizeof(struct bcm_tag)){
-+              vfree(buf);
-+              return -EIO;
-+      }
-+
-+      sscanf(buf->kernelAddress, "%u", &kerneladdr);
-+      sscanf(buf->kernelLength, "%u", &kernellen);
-+      sscanf(buf->totalLength, "%u", &totallen);
-+      tagversion = &(buf->tagVersion[0]);
-+      boardid = &(buf->boardid[0]);
-+
-+      printk(KERN_INFO PFX "CFE boot tag found with version %s and board type %s\n",tagversion, boardid);
-+
-+      kerneladdr = kerneladdr - EXTENDED_SIZE;
-+      rootfsaddr = kerneladdr + kernellen;
-+      spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
-+      sparelen = master->size - spareaddr - master->erasesize;
-+      rootfslen = spareaddr - rootfsaddr;
-+
-+      /* Determine number of partitions */
-+      namelen = 8;
-+      if (rootfslen > 0){
-+              nrparts++;
-+              namelen =+ 6;
-+      };
-+      if (kernellen > 0) {
-+              nrparts++;
-+              namelen =+ 6;
-+      };
-+
-+      /* Ask kernel for more memory */
-+      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-+      if (!parts) {
-+              vfree(buf);
-+              return -ENOMEM;
-+      };
-+
-+      /* Start building partition list */
-+      parts[curpart].name = "CFE";
-+      parts[curpart].offset = 0;
-+      parts[curpart].size = master->erasesize;
-+      curpart++;
-+
-+      if (kernellen > 0) {
-+              parts[curpart].name = "kernel";
-+              parts[curpart].offset = kerneladdr;
-+              parts[curpart].size = kernellen;
-+              curpart++;
-+      };
-+
-+      if (rootfslen > 0) {
-+              parts[curpart].name = "rootfs";
-+              parts[curpart].offset = rootfsaddr;
-+              parts[curpart].size = rootfslen;
-+              if (sparelen > 0)
-+                      parts[curpart].size += sparelen;
-+              curpart++;
-+      };
-+
-+      parts[curpart].name = "nvram";
-+      parts[curpart].offset = master->size - master->erasesize;
-+      parts[curpart].size = master->erasesize;
-+
-+      /* Global partition "linux" to make easy firmware upgrade */
-+      curpart++;
-+      parts[curpart].name = "linux";
-+      parts[curpart].offset = parts[0].size;
-+      parts[curpart].size = master->size - parts[0].size - parts[3].size;
-+
-+      for (i = 0; i < nrparts; i++)
-+              printk(KERN_INFO PFX "Partition %d is %s offset %lx and length %lx\n", i, parts[i].name, (long unsigned int)(parts[i].offset), (long unsigned int)(parts[i].size));
-+
-+      printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n", spareaddr, sparelen);
-+      *pparts = parts;
-+      vfree(buf);
-+
-+      return nrparts;
-+};
-+
-+static int bcm963xx_detect_cfe(struct mtd_info *master)
-+{
-+      int idoffset = 0x4e0;
-+      static char idstring[8] = "CFE1CFE1";
-+      char buf[9];
-+      int ret;
-+      size_t retlen;
-+
-+      ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
-+      buf[retlen] = 0;
-+      printk(KERN_INFO PFX "Read Signature value of %s\n", buf);
-+
-+      return strncmp(idstring, buf, 8);
-+}
-+
-+static int bcm963xx_probe(struct platform_device *pdev)
-+{
-+      int err = 0;
-+      int parsed_nr_parts = 0;
-+      char *part_type;
-+      struct resource *r;
-+
-+      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      bcm963xx_map.phys = r->start;
-+      bcm963xx_map.size = (r->end - r->start) + 1;
-+      bcm963xx_map.virt = ioremap(r->start, r->end - r->start + 1);
-+
-+      if (!bcm963xx_map.virt) {
-+              printk(KERN_ERR PFX "Failed to ioremap\n");
-+              return -EIO;
-+      }
-+      printk(KERN_INFO PFX "0x%08lx at 0x%08x\n", bcm963xx_map.size, bcm963xx_map.phys);
-+
-+      simple_map_init(&bcm963xx_map);
-+
-+      bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
-+      if (!bcm963xx_mtd_info) {
-+              printk(KERN_ERR PFX "Failed to probe using CFI\n");
-+              err = -EIO;
-+              goto err_probe;
-+      }
-+
-+      bcm963xx_mtd_info->owner = THIS_MODULE;
-+
-+      /* This is mutually exclusive */
-+      if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) {
-+              printk(KERN_INFO PFX "CFE bootloader detected\n");
-+              if (parsed_nr_parts == 0) {
-+                      int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts);
-+                      if (ret > 0) {
-+                              part_type = "CFE";
-+                              parsed_nr_parts = ret;
-+                      }
-+              }
-+      } else {
-+              printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
-+              if (bcm963xx_mtd_info->size > 0x00400000) {
-+                      printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
-+                      bcm963xx_map.virt = (u32)(EXTENDED_SIZE);
-+              }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+              if (parsed_nr_parts == 0) {
-+                      int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
-+                      if (ret > 0) {
-+                              part_type = "RedBoot";
-+                              parsed_nr_parts = ret;
-+                      }
-+              }
-+#endif
-+      }
-+
-+      return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
-+
-+err_probe:
-+      iounmap(bcm963xx_map.virt);
-+      return err;
-+}
-+
-+static int bcm963xx_remove(struct platform_device *pdev)
-+{
-+      if (bcm963xx_mtd_info) {
-+              del_mtd_partitions(bcm963xx_mtd_info);
-+              map_destroy(bcm963xx_mtd_info);
-+      }
-+
-+      if (bcm963xx_map.virt) {
-+              iounmap(bcm963xx_map.virt);
-+              bcm963xx_map.virt = 0;
-+      }
-+
-+      return 0;
-+}
-+
-+static struct platform_driver bcm63xx_mtd_dev = {
-+      .probe  = bcm963xx_probe,
-+      .remove = bcm963xx_remove,
-+      .driver = {
-+              .name   = "bcm963xx-flash",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+static int __init bcm963xx_mtd_init(void)
-+{
-+      return platform_driver_register(&bcm63xx_mtd_dev);
-+}
-+
-+static void __exit bcm963xx_mtd_exit(void)
-+{
-+      platform_driver_unregister(&bcm63xx_mtd_dev);
-+}
-+
-+module_init(bcm963xx_mtd_init);
-+module_exit(bcm963xx_mtd_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Broadcom BCM63xx MTD partition parser/mapping for CFE and RedBoot");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -722,20 +722,6 @@ static int board_get_mac_address(u8 *mac
-       return 0;
- }
--static struct mtd_partition mtd_partitions[] = {
--      {
--              .name           = "cfe",
--              .offset         = 0x0,
--              .size           = 0x40000,
--      }
--};
--
--static struct physmap_flash_data flash_data = {
--      .width                  = 2,
--      .nr_parts               = ARRAY_SIZE(mtd_partitions),
--      .parts                  = mtd_partitions,
--};
--
- static struct resource mtd_resources[] = {
-       {
-               .start          = 0,    /* filled at runtime */
-@@ -745,12 +731,9 @@ static struct resource mtd_resources[] =
- };
- static struct platform_device mtd_dev = {
--      .name                   = "physmap-flash",
-+      .name                   = "bcm963xx-flash",
-       .resource               = mtd_resources,
-       .num_resources          = ARRAY_SIZE(mtd_resources),
--      .dev                    = {
--              .platform_data  = &flash_data,
--      },
- };
- /*
diff --git a/target/linux/brcm63xx/patches-2.6.32/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-2.6.32/070_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index e5e1dc4..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -1526,7 +1526,7 @@ static int compute_hw_mtu(struct bcm_ene
-       actual_mtu = mtu;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
-               return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-2.6.32/100-reset_buttons.patch b/target/linux/brcm63xx/patches-2.6.32/100-reset_buttons.patch
deleted file mode 100644 (file)
index cdafd92..0000000
+++ /dev/null
@@ -1,99 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -288,6 +290,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -345,6 +357,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -771,12 +793,23 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
-+      .poll_interval  = 20,
-+};
-+
-+static struct platform_device bcm63xx_gpio_buttons_device = {
-+      .name           = "gpio-buttons",
-+      .id             = 0,
-+      .dev.platform_data = &bcm63xx_gpio_buttons_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
-       u32 val;
-+      int button_count = 0;
-       if (board.has_pccard)
-               bcm63xx_pcmcia_register();
-@@ -826,6 +859,17 @@ int __init board_register_devices(void)
-       platform_device_register(&bcm63xx_gpio_leds);
-+      /* count number of BUTTONs defined by this device */
-+      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+              button_count++;
-+
-+      if (button_count) {
-+              bcm63xx_gpio_buttons_data.nbuttons = button_count;
-+              bcm63xx_gpio_buttons_data.buttons = board.buttons;
-+
-+              platform_device_register(&bcm63xx_gpio_buttons_device);
-+      }
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -55,6 +55,9 @@ struct board_info {
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
-+
-+      /* Buttons */
-+      struct gpio_button buttons[2];
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.32/110-gpiodev.patch b/target/linux/brcm63xx/patches-2.6.32/110-gpiodev.patch
deleted file mode 100644 (file)
index 5262b18..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -785,6 +785,10 @@ static struct ssb_sprom bcm63xx_sprom = 
- };
- #endif
-+static struct resource gpiodev_resource = {
-+      .start                  = 0xFFFFFFFF,
-+};
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -854,6 +858,8 @@ int __init board_register_devices(void)
-       platform_device_register(&mtd_dev);
-+      platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
-+
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-       bcm63xx_led_data.leds = board.leds;
diff --git a/target/linux/brcm63xx/patches-2.6.32/120-board_rta1025w_16.patch b/target/linux/brcm63xx/patches-2.6.32/120-board_rta1025w_16.patch
deleted file mode 100644 (file)
index ee4c108..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -393,6 +393,25 @@ static struct board_info __initdata boar
-         .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_rta1025w_16 = {
-+      .name                           = "RTA1025W_16",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
-+
- static struct board_info __initdata board_DV201AMR = {
-       .name                           = "DV201AMR",
-       .expected_cpu_id                = 0x6348,
-@@ -577,6 +596,7 @@ static const struct board_info __initdat
-       &board_FAST2404,
-       &board_DV201AMR,
-       &board_96348gw_a,
-+      &board_rta1025w_16,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-2.6.32/130-board_DWVS0.patch b/target/linux/brcm63xx/patches-2.6.32/130-board_DWVS0.patch
deleted file mode 100644 (file)
index ba2134a..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -575,6 +575,27 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_DWVS0 = {
-+      .name                           = "DWV-S0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
- #endif
- /*
-@@ -603,6 +624,7 @@ static const struct board_info __initdat
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_DWVS0,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-2.6.32/140-new_bcm96348gw_leds.patch b/target/linux/brcm63xx/patches-2.6.32/140-new_bcm96348gw_leds.patch
deleted file mode 100644 (file)
index da2c378..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -331,29 +331,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
-+                      .name           = "line1",
-+                      .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
--                      .gpio           = 3,
-+                      .name           = "line2",
-+                      .gpio           = 5,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
-+                      .name           = "line3",
-+                      .gpio           = 6,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
--                      .gpio           = 0,
-+                      .name           = "tel",
-+                      .gpio           = 7,
-                       .active_low     = 1,
--                      .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
--                      .gpio           = 1,
-+                      .name           = "eth",
-+                      .gpio           = 35,
-                       .active_low     = 1,
-               },
-       },
-@@ -855,6 +854,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       u32 val;
-+      int led_count = 0;
-       int button_count = 0;
-       if (board.has_pccard)
-@@ -902,7 +902,11 @@ int __init board_register_devices(void)
-       platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+      /* count number of LEDs defined by this device */
-+      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+              led_count++;
-+
-+      bcm63xx_led_data.num_leds = led_count;
-       bcm63xx_led_data.leds = board.leds;
-       platform_device_register(&bcm63xx_gpio_leds);
diff --git a/target/linux/brcm63xx/patches-2.6.32/150-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-2.6.32/150-alice_gate2_leds.patch
deleted file mode 100644 (file)
index 4eea7f4..0000000
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -573,6 +573,93 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
-+
-+      .leds = {
-+              /*Each led on alice gate is bi-color */
-+              {
-+                      .name           = "power:red",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "power:green",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "adsl:red",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "adsl:green",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi:red",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi:green",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "internet:red",
-+                      .gpio           = 25,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "internet:green",
-+                      .gpio           = 24,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "usr1:red",
-+                      .gpio           = 27,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "usr1:green",
-+                      .gpio           = 26,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "usr2:red",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "usr2:green",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "sw2",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+      },
-+      /* sw1 is connected to gpio34*/
- };
- static struct board_info __initdata board_DWVS0 = {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -54,7 +54,7 @@ struct board_info {
-       struct bcm63xx_dsp_platform_data dsp;
-       /* GPIO LEDs */
--      struct gpio_led leds[5];
-+      struct gpio_led leds[14];
-       /* Buttons */
-       struct gpio_button buttons[2];
diff --git a/target/linux/brcm63xx/patches-2.6.32/160-fix_gpio_count.patch b/target/linux/brcm63xx/patches-2.6.32/160-fix_gpio_count.patch
deleted file mode 100644 (file)
index f997685..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -10,6 +10,10 @@ static inline unsigned long bcm63xx_gpio
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6358_CPU_ID:
-               return 40;
-+      case BCM6338_CPU_ID:
-+              return 8;
-+      case BCM6345_CPU_ID:
-+              return 16;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
diff --git a/target/linux/brcm63xx/patches-2.6.32/170-board_livebox.patch b/target/linux/brcm63xx/patches-2.6.32/170-board_livebox.patch
deleted file mode 100644 (file)
index 02354d5..0000000
+++ /dev/null
@@ -1,246 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
-       select SSB
-        help
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+       Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
- EXTRA_CFLAGS += -Werror
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,223 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/gpio_buttons.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox = {
-+      .name                           = "Livebox",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox
-+#endif
-+};
-+
-+/*
-+ * early init callback
-+ */
-+void __init board_prom_init(void)
-+{
-+      u32 val;
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+
-+      /* assume board is a Livebox */
-+      memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+
-+static int board_get_mac_address(u8 *mac)
-+{
-+      u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, default_mac, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+static struct resource mtd_resources[] = {
-+      {
-+              .start          = 0,    /* filled at runtime */
-+              .end            = 0,    /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      }
-+};
-+
-+static struct platform_device mtd_dev = {
-+      .name                   = "bcm963xx-flash",
-+      .resource               = mtd_resources,
-+      .num_resources          = ARRAY_SIZE(mtd_resources),
-+};
-+
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      u32 val;
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !board_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !board_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      mtd_resources[0].start = val;
-+      mtd_resources[0].end = 0x1FFFFFFF;
-+
-+      platform_device_register(&mtd_dev);
-+
-+      return 0;
-+}
-+
diff --git a/target/linux/brcm63xx/patches-2.6.32/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-2.6.32/180-udc_preliminary_support.patch
deleted file mode 100644 (file)
index b19bdf7..0000000
+++ /dev/null
@@ -1,242 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -28,6 +28,7 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_udc.h>
- #include <board_bcm963xx.h>
- #define PFX   "board_bcm963xx: "
-@@ -390,6 +391,7 @@ static struct board_info __initdata boar
-         .has_ohci0 = 1,
-         .has_pccard = 1,
-         .has_ehci0 = 1,
-+      .has_udc0                       = 1,
- };
- static struct board_info __initdata board_rta1025w_16 = {
-@@ -964,6 +966,9 @@ int __init board_register_devices(void)
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
-+      if (board.has_udc0)
-+              bcm63xx_udc_register();
-+
-       /* Generate MAC address for WLAN and
-        * register our SPROM */
- #ifdef CONFIG_SSB_PCIHOST
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-udc.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+
-+static struct resource udc_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 udc_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_udc_device = {
-+      .name           = "bcm63xx-udc",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(udc_resources),
-+      .resource       = udc_resources,
-+      .dev            = {
-+              .dma_mask               = &udc_dmamask,
-+              .coherent_dma_mask      = 0xffffffff,
-+      },
-+};
-+
-+int __init bcm63xx_udc_register(void)
-+{
-+      if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
-+              return 0;
-+
-+      udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
-+      udc_resources[0].end = udc_resources[0].start;
-+      udc_resources[0].end += RSET_UDC_SIZE - 1;
-+      udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
-+      return platform_device_register(&bcm63xx_udc_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -125,7 +125,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART0_BASE           (0xfffe0300)
- #define BCM_6338_GPIO_BASE            (0xfffe0400)
- #define BCM_6338_SPI_BASE             (0xfffe0c00)
--#define BCM_6338_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6338_UDC0_BASE            (0xfffe3000)
- #define BCM_6338_USBDMA_BASE          (0xfffe2400)
- #define BCM_6338_OHCI0_BASE           (0xdeadbeef)
- #define BCM_6338_OHCI_PRIV_BASE               (0xfffe3000)
-@@ -155,7 +155,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART0_BASE           (0xfffe0300)
- #define BCM_6345_GPIO_BASE            (0xfffe0400)
- #define BCM_6345_SPI_BASE             (0xdeadbeef)
--#define BCM_6345_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6345_UDC0_BASE            (0xfffe2100)
- #define BCM_6345_USBDMA_BASE          (0xfffe2800)
- #define BCM_6345_ENET0_BASE           (0xfffe1800)
- #define BCM_6345_ENETDMA_BASE         (0xfffe2800)
-@@ -210,7 +210,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART0_BASE           (0xfffe0100)
- #define BCM_6358_GPIO_BASE            (0xfffe0080)
- #define BCM_6358_SPI_BASE             (0xdeadbeef)
--#define BCM_6358_UDC0_BASE            (0xfffe0800)
-+#define BCM_6358_UDC0_BASE            (0xfffe0400)
- #define BCM_6358_OHCI0_BASE           (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE               (0xdeadbeef)
- #define BCM_6358_USBH_PRIV_BASE               (0xfffe1500)
-@@ -430,6 +430,7 @@ enum bcm63xx_irq {
-       IRQ_TIMER = 0,
-       IRQ_UART0,
-       IRQ_DSL,
-+      IRQ_UDC0,
-       IRQ_ENET0,
-       IRQ_ENET1,
-       IRQ_ENET_PHY,
-@@ -472,7 +473,7 @@ enum bcm63xx_irq {
- #define BCM_6345_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
- #define BCM_6345_DSL_IRQ              (IRQ_INTERNAL_BASE + 3)
- #define BCM_6345_ATM_IRQ              (IRQ_INTERNAL_BASE + 4)
--#define BCM_6345_USB_IRQ              (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6345_UDC0_IRQ             (IRQ_INTERNAL_BASE + 5)
- #define BCM_6345_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
- #define BCM_6345_ENET0_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 13 + 1)
-@@ -494,10 +495,17 @@ enum bcm63xx_irq {
- #define BCM_6348_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
- #define BCM_6348_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ              (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6348_UDC0_IRQ             (IRQ_INTERNAL_BASE + 6)
- #define BCM_6348_ENET1_IRQ            (IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
- #define BCM_6348_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6348_USB_CNTL_RX_DMA_IRQ  (IRQ_INTERNAL_BASE + 14)
-+#define BCM_6348_USB_CNTL_TX_DMA_IRQ  (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6348_USB_BULK_RX_DMA_IRQ  (IRQ_INTERNAL_BASE + 16)
-+#define BCM_6348_USB_BULK_TX_DMA_IRQ  (IRQ_INTERNAL_BASE + 17)
-+#define BCM_6348_USB_ISO_RX_DMA_IRQ   (IRQ_INTERNAL_BASE + 18)
-+#define BCM_6348_USB_ISO_TX_DMA_IRQ   (IRQ_INTERNAL_BASE + 19)
- #define BCM_6348_ENET0_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 20)
- #define BCM_6348_ENET0_TXDMA_IRQ      (IRQ_INTERNAL_BASE + 21)
- #define BCM_6348_ENET1_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 22)
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_UDC_H_
-+#define BCM63XX_DEV_USB_UDC_H_
-+
-+int bcm63xx_udc_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_UDC_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -45,6 +45,7 @@ struct board_info {
-       unsigned int    has_ohci0:1;
-       unsigned int    has_ehci0:1;
-       unsigned int    has_dsp:1;
-+      unsigned int    has_udc0:1;
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-ehci.o
-+                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
- };
- /*
-+ * USB slave clock
-+ */
-+static void usbs_set(struct clk *clk, int enable)
-+{
-+      u32 mask;
-+
-+      switch(bcm63xx_get_cpu_id()) {
-+      case BCM6338_CPU_ID:
-+              mask = CKCTL_6338_USBS_EN;
-+              break;
-+      case BCM6348_CPU_ID:
-+              mask = CKCTL_6348_USBS_EN;
-+              break;
-+      default:
-+              return;
-+      }
-+      bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_usbs = {
-+      .set    = usbs_set,
-+};
-+
-+/*
-  * SPI clock
-  */
- static void spi_set(struct clk *clk, int enable)
-@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev, 
-               return &clk_ephy;
-       if (!strcmp(id, "usbh"))
-               return &clk_usbh;
-+      if (!strcmp(id, "usbs"))
-+              return &clk_usbs;
-       if (!strcmp(id, "spi"))
-               return &clk_spi;
-       if (!strcmp(id, "periph"))
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
-       select USB_ARCH_HAS_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC
-       select USB_OHCI_BIG_ENDIAN_MMIO
-+      select USB_ARCH_HAS_UDC
- config BCM63XX_CPU_6345
-       bool "support 6345 CPU"
-@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
-       select USB_ARCH_HAS_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC
-       select USB_OHCI_BIG_ENDIAN_MMIO
-+      select USB_ARCH_HAS_UDC
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
diff --git a/target/linux/brcm63xx/patches-2.6.32/190-typo_cpu_features_override.patch b/target/linux/brcm63xx/patches-2.6.32/190-typo_cpu_features_override.patch
deleted file mode 100644 (file)
index cf5e611..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-Fix typo: CONFIG_BCMCPU_IS_63xx does not exists,
-CONFIG_BCM63XX_CPU_63xx is the valid config option.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- .../asm/mach-bcm63xx/cpu-feature-overrides.h       |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-@@ -24,7 +24,7 @@
- #define cpu_has_smartmips             0
- #define cpu_has_vtag_icache           0
--#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
-+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
- #define cpu_has_dc_aliases            0
- #endif
diff --git a/target/linux/brcm63xx/patches-2.6.32/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-2.6.32/200-extended-platform-devices.patch
deleted file mode 100644 (file)
index 8d64135..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1014,6 +1014,10 @@ int __init board_register_devices(void)
-               platform_device_register(&bcm63xx_gpio_buttons_device);
-       }
-+      if (board.num_devs) {
-+              platform_add_devices(board.devs, board.num_devs);
-+      }
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -59,6 +59,10 @@ struct board_info {
-       /* Buttons */
-       struct gpio_button buttons[2];
-+
-+      /* Additional platform devices */
-+      struct platform_device **devs;
-+      unsigned int    num_devs;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.32/210-init_gpio_out_low_high_current_value_at_boot.patch b/target/linux/brcm63xx/patches-2.6.32/210-init_gpio_out_low_high_current_value_at_boot.patch
deleted file mode 100644 (file)
index 902840b..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-To avoid glitch during gpio initialisation, fetch gpio output
-registers values left by bootloader.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/gpio.c |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -125,6 +125,8 @@ static struct gpio_chip bcm63xx_gpio_chi
- int __init bcm63xx_gpio_init(void)
- {
-+      gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+      gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
-       bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
-       pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
diff --git a/target/linux/brcm63xx/patches-2.6.32/211-nxp-74hc164-gpio-chip-driver.patch b/target/linux/brcm63xx/patches-2.6.32/211-nxp-74hc164-gpio-chip-driver.patch
deleted file mode 100644 (file)
index 8e50ee7..0000000
+++ /dev/null
@@ -1,279 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -230,4 +230,12 @@ config GPIO_UCB1400
-         To compile this driver as a module, choose M here: the
-         module will be called ucb1400_gpio.
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC164
-+       tristate "NXP 74HC164 Output expanders"
-+       help
-+         Platform driver for NXP 74HC164 8-output Expanders. This
-+         provides a GPIO interface supporting outputs.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_MAX7301)   += max7301.o
- obj-$(CONFIG_GPIO_MAX732X)    += max732x.o
- obj-$(CONFIG_GPIO_MC33880)    += mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08)   += mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC164)        += nxp_74hc164.o
- obj-$(CONFIG_GPIO_PCA953X)    += pca953x.o
- obj-$(CONFIG_GPIO_PCF857X)    += pcf857x.o
- obj-$(CONFIG_GPIO_PL061)      += pl061.o
---- /dev/null
-+++ b/drivers/gpio/nxp_74hc164.c
-@@ -0,0 +1,226 @@
-+/*
-+ *  NXP 74HC164 - output expander  GPIO driver
-+ *
-+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  Copy from nxp_74hc153.c code
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/gpio.h>
-+#include <linux/bitops.h>
-+#include <linux/platform_device.h>
-+#include <linux/nxp_74hc164.h>
-+
-+#define NXP_74HC164_NUM_GPIOS 8
-+
-+struct nxp_74hc164_chip {
-+      struct device           *parent;
-+      struct gpio_chip        gpio_chip;
-+      struct mutex            lock;
-+      long                    mask;
-+};
-+
-+static void nxp_74hc164_set_value(struct gpio_chip *, unsigned, int);
-+
-+static struct nxp_74hc164_chip *gpio_to_nxp(struct gpio_chip *gc)
-+{
-+      return container_of(gc, struct nxp_74hc164_chip, gpio_chip);
-+}
-+
-+static int nxp_74hc164_direction_input(struct gpio_chip *gc, unsigned offset)
-+{
-+      WARN_ON(1);
-+      return -EINVAL;
-+}
-+
-+static int nxp_74hc164_direction_output(struct gpio_chip *gc,
-+                                      unsigned offset, int val)
-+{
-+      nxp_74hc164_set_value(gc, offset, val);
-+      return 0;
-+}
-+
-+static int nxp_74hc164_get_value(struct gpio_chip *gc, unsigned offset)
-+{
-+      struct nxp_74hc164_chip *nxp = gpio_to_nxp(gc);
-+      int ret;
-+
-+      mutex_lock(&nxp->lock);
-+      ret = test_bit(offset, &nxp->mask);
-+      mutex_unlock(&nxp->lock);
-+
-+      return ret;
-+}
-+
-+static void nxp_74hc164_set_value(struct gpio_chip *gc,
-+                                unsigned offset, int val)
-+{
-+      struct nxp_74hc164_chip *nxp;
-+      struct nxp_74hc164_platform_data *pdata;
-+      long mask;
-+      int refresh;
-+      int i;
-+
-+      nxp = gpio_to_nxp(gc);
-+      pdata = nxp->parent->platform_data;
-+
-+      mutex_lock(&nxp->lock);
-+      if (val)
-+              refresh = (test_and_set_bit(offset, &nxp->mask) != val);
-+      else
-+              refresh = (test_and_clear_bit(offset, &nxp->mask) != val);
-+
-+      if (refresh) {
-+              mask = nxp->mask;
-+              for (i = 8; i > 0; --i, mask <<= 1) {
-+                      gpio_set_value(pdata->gpio_pin_data, mask & 0x80);
-+                      gpio_set_value(pdata->gpio_pin_clk, 1);
-+                      gpio_set_value(pdata->gpio_pin_clk, 0);
-+              }
-+      }
-+      mutex_unlock(&nxp->lock);
-+}
-+
-+static int __devinit nxp_74hc164_probe(struct platform_device *pdev)
-+{
-+      struct nxp_74hc164_platform_data *pdata;
-+      struct nxp_74hc164_chip *nxp;
-+      struct gpio_chip *gc;
-+      int err;
-+
-+      pdata = pdev->dev.platform_data;
-+      if (pdata == NULL) {
-+              dev_dbg(&pdev->dev, "no platform data specified\n");
-+              return -EINVAL;
-+      }
-+
-+      nxp = kzalloc(sizeof(struct nxp_74hc164_chip), GFP_KERNEL);
-+      if (nxp == NULL) {
-+              dev_err(&pdev->dev, "no memory for private data\n");
-+              return -ENOMEM;
-+      }
-+
-+      err = gpio_request(pdata->gpio_pin_clk, dev_name(&pdev->dev));
-+      if (err) {
-+              dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
-+                      pdata->gpio_pin_clk, err);
-+              goto err_free_nxp;
-+      }
-+
-+      err = gpio_request(pdata->gpio_pin_data, dev_name(&pdev->dev));
-+      if (err) {
-+              dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
-+                      pdata->gpio_pin_data, err);
-+              goto err_free_clk;
-+      }
-+
-+      err = gpio_direction_output(pdata->gpio_pin_clk, 0);
-+      if (err) {
-+              dev_err(&pdev->dev,
-+                      "unable to set direction of gpio %u, err=%d\n",
-+                      pdata->gpio_pin_clk, err);
-+              goto err_free_data;
-+      }
-+
-+      err = gpio_direction_output(pdata->gpio_pin_data, 0);
-+      if (err) {
-+              dev_err(&pdev->dev,
-+                      "unable to set direction of gpio %u, err=%d\n",
-+                      pdata->gpio_pin_data, err);
-+              goto err_free_data;
-+      }
-+
-+      nxp->parent = &pdev->dev;
-+      mutex_init(&nxp->lock);
-+
-+      gc = &nxp->gpio_chip;
-+
-+      gc->direction_input  = nxp_74hc164_direction_input;
-+      gc->direction_output = nxp_74hc164_direction_output;
-+      gc->get = nxp_74hc164_get_value;
-+      gc->set = nxp_74hc164_set_value;
-+      gc->can_sleep = 1;
-+
-+      gc->base = pdata->gpio_base;
-+      gc->ngpio = NXP_74HC164_NUM_GPIOS;
-+      gc->label = dev_name(nxp->parent);
-+      gc->dev = nxp->parent;
-+      gc->owner = THIS_MODULE;
-+
-+      err = gpiochip_add(&nxp->gpio_chip);
-+      if (err) {
-+              dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
-+              goto err_free_data;
-+      }
-+
-+      platform_set_drvdata(pdev, nxp);
-+      return 0;
-+
-+ err_free_data:
-+      gpio_free(pdata->gpio_pin_data);
-+ err_free_clk:
-+      gpio_free(pdata->gpio_pin_clk);
-+ err_free_nxp:
-+      kfree(nxp);
-+      return err;
-+}
-+
-+static int nxp_74hc164_remove(struct platform_device *pdev)
-+{
-+      struct nxp_74hc164_chip *nxp = platform_get_drvdata(pdev);
-+      struct nxp_74hc164_platform_data *pdata = pdev->dev.platform_data;
-+
-+      if (nxp) {
-+              int err;
-+
-+              err = gpiochip_remove(&nxp->gpio_chip);
-+              if (err) {
-+                      dev_err(&pdev->dev,
-+                              "unable to remove gpio chip, err=%d\n",
-+                              err);
-+                      return err;
-+              }
-+
-+              gpio_free(pdata->gpio_pin_clk);
-+              gpio_free(pdata->gpio_pin_data);
-+
-+              kfree(nxp);
-+              platform_set_drvdata(pdev, NULL);
-+      }
-+
-+      return 0;
-+}
-+
-+static struct platform_driver nxp_74hc164_driver = {
-+      .probe          = nxp_74hc164_probe,
-+      .remove         = __devexit_p(nxp_74hc164_remove),
-+      .driver = {
-+              .name   = NXP_74HC164_DRIVER_NAME,
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+static int __init nxp_74hc164_init(void)
-+{
-+      return platform_driver_register(&nxp_74hc164_driver);
-+}
-+subsys_initcall(nxp_74hc164_init);
-+
-+static void __exit nxp_74hc164_exit(void)
-+{
-+      platform_driver_unregister(&nxp_74hc164_driver);
-+}
-+module_exit(nxp_74hc164_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC164");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME);
---- /dev/null
-+++ b/include/linux/nxp_74hc164.h
-@@ -0,0 +1,22 @@
-+/*
-+ *  NXP 74HC164 - Dual 4-input multiplexer defines
-+ *
-+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+
-+#ifndef _NXP_74HC164_H
-+#define _NXP_74HC164_H
-+
-+#define NXP_74HC164_DRIVER_NAME "nxp-74hc164"
-+
-+struct nxp_74hc164_platform_data {
-+      unsigned        gpio_base;
-+      unsigned        gpio_pin_data;
-+      unsigned        gpio_pin_clk;
-+};
-+
-+#endif /* _NXP_74HC164_H */
diff --git a/target/linux/brcm63xx/patches-2.6.32/220-board-D4PW.patch b/target/linux/brcm63xx/patches-2.6.32/220-board-D4PW.patch
deleted file mode 100644 (file)
index 4c2cd56..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -451,6 +451,49 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "ppp",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "ppp-fail",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+
-+              },
-+      },
-+
-+};
-+
- #endif
- /*
-@@ -706,6 +749,7 @@ static const struct board_info __initdat
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-2.6.32/221-board-NB4.patch b/target/linux/brcm63xx/patches-2.6.32/221-board-NB4.patch
deleted file mode 100644 (file)
index 38ab54c..0000000
+++ /dev/null
@@ -1,536 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
- #include <linux/input.h>
-+#include <linux/nxp_74hc164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -33,6 +34,12 @@
- #define PFX   "board_bcm963xx: "
-+#define NEUFBOX4_PID_OFFSET           0xff80
-+#define NEUFBOX4_EXP_GPIO_BASE                64
-+#define NEUFBOX4_GPIO_74HC164_DATA    7
-+#define NEUFBOX4_GPIO_74HC164_CLK     6
-+#define NXP_74HC64_GPIO(X)            (NEUFBOX4_EXP_GPIO_BASE + (X))
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -727,6 +734,471 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct nxp_74hc164_platform_data neufbox4_74hc164_data = {
-+      .gpio_base      = NEUFBOX4_EXP_GPIO_BASE,
-+      .gpio_pin_data  = NEUFBOX4_GPIO_74HC164_DATA,
-+      .gpio_pin_clk   = NEUFBOX4_GPIO_74HC164_CLK,
-+
-+};
-+
-+static struct platform_device neufbox4_74hc164 = {
-+      .name           = NXP_74HC164_DRIVER_NAME,
-+      .id             = -1,
-+      .dev = {
-+              .platform_data  = &neufbox4_74hc164_data,
-+      }
-+};
-+
-+static struct platform_device * __initdata neufbox4_devices[] = {
-+      &neufbox4_74hc164,
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .has_udc0                       = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "adsl",
-+                      .gpio           = NXP_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tel",
-+                      .gpio           = NXP_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tv",
-+                      .gpio           = NXP_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "alarm",
-+                      .gpio           = NXP_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:blue",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .threshold      = 3,
-+              },
-+      },
-+      .devs = neufbox4_devices,
-+      .num_devs = ARRAY_SIZE(neufbox4_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+      .name                           = "NB4-SER-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .has_udc0                       = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "adsl",
-+                      .gpio           = NXP_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tel",
-+                      .gpio           = NXP_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tv",
-+                      .gpio           = NXP_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "alarm",
-+                      .gpio           = NXP_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:blue",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .threshold      = 3,
-+              },
-+      },
-+      .devs = neufbox4_devices,
-+      .num_devs = ARRAY_SIZE(neufbox4_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+      .name                           = "NB4-SER-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "adsl",
-+                      .gpio           = NXP_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tel",
-+                      .gpio           = NXP_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tv",
-+                      .gpio           = NXP_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "alarm",
-+                      .gpio           = NXP_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:blue",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .threshold      = 3,
-+              },
-+      },
-+      .devs = neufbox4_devices,
-+      .num_devs = ARRAY_SIZE(neufbox4_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .has_udc0                       = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "adsl",
-+                      .gpio           = NXP_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "tel",
-+                      .gpio           = NXP_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tv",
-+                      .gpio           = NXP_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "alarm",
-+                      .gpio           = NXP_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "service:blue",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .threshold      = 3,
-+              },
-+      },
-+      .devs = neufbox4_devices,
-+      .num_devs = ARRAY_SIZE(neufbox4_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+      .name                           = "NB4-FXC-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "adsl",
-+                      .gpio           = NXP_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "tel",
-+                      .gpio           = NXP_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "tv",
-+                      .gpio           = NXP_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "alarm",
-+                      .gpio           = NXP_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "service:red",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "service:green",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "service:blue",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .threshold      = 3,
-+              },
-+      },
-+      .devs = neufbox4_devices,
-+      .num_devs = ARRAY_SIZE(neufbox4_devices),
-+};
- #endif
- /*
-@@ -757,9 +1229,30 @@ static const struct board_info __initdat
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_ser_r1,
-+      &board_nb4_ser_r2,
-+      &board_nb4_fxc_r1,
-+      &board_nb4_fxc_r2,
- #endif
- };
-+static void __init neufbox4_nvram_fixup(void)
-+{
-+      u8 *boot_addr, *p;
-+      u32 val;
-+
-+      if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
-+              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              val &= MPI_CSBASE_BASE_MASK;
-+              boot_addr = (u8 *)KSEG1ADDR(val);
-+              /* Extract neufbox4 PID */
-+              p = boot_addr + NEUFBOX4_PID_OFFSET;
-+              if (!memcmp(p, "NB4-", 4))
-+                      memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
-+      }
-+}
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -807,6 +1300,9 @@ void __init board_prom_init(void)
-               return;
-       }
-+      /* Fixup broken neufbox4 board name */
-+      neufbox4_nvram_fixup();
-+
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-               if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-2.6.32/230-external_phy_fix.patch b/target/linux/brcm63xx/patches-2.6.32/230-external_phy_fix.patch
deleted file mode 100644 (file)
index 9616088..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -965,7 +965,9 @@ static int bcm_enet_open(struct net_devi
-       /* all set, enable mac and interrupts, start dma engine and
-        * kick rx dma channel */
-       wmb();
--      enet_writel(priv, ENET_CTL_ENABLE_MASK, ENET_CTL_REG);
-+      val = enet_readl(priv, ENET_CTL_REG);
-+      val |= ENET_CTL_ENABLE_MASK;
-+      enet_writel(priv, val, ENET_CTL_REG);
-       enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-       enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-                       ENETDMA_CHANCFG_REG(priv->rx_chan));
diff --git a/target/linux/brcm63xx/patches-2.6.32/240-spi.patch b/target/linux/brcm63xx/patches-2.6.32/240-spi.patch
deleted file mode 100644 (file)
index 570c157..0000000
+++ /dev/null
@@ -1,957 +0,0 @@
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -55,6 +55,7 @@ static const unsigned long bcm96338_regs
- static const int bcm96338_irqs[] = {
-       [IRQ_TIMER]             = BCM_6338_TIMER_IRQ,
-+      [IRQ_SPI]               = BCM_6338_SPI_IRQ,
-       [IRQ_UART0]             = BCM_6338_UART0_IRQ,
-       [IRQ_DSL]               = BCM_6338_DSL_IRQ,
-       [IRQ_ENET0]             = BCM_6338_ENET0_IRQ,
-@@ -127,6 +128,7 @@ static const unsigned long bcm96348_regs
- static const int bcm96348_irqs[] = {
-       [IRQ_TIMER]             = BCM_6348_TIMER_IRQ,
-+      [IRQ_SPI]               = BCM_6348_SPI_IRQ,
-       [IRQ_UART0]             = BCM_6348_UART0_IRQ,
-       [IRQ_DSL]               = BCM_6348_DSL_IRQ,
-       [IRQ_ENET0]             = BCM_6348_ENET0_IRQ,
-@@ -169,6 +171,7 @@ static const unsigned long bcm96358_regs
- static const int bcm96358_irqs[] = {
-       [IRQ_TIMER]             = BCM_6358_TIMER_IRQ,
-+      [IRQ_SPI]               = BCM_6358_SPI_IRQ,
-       [IRQ_UART0]             = BCM_6358_UART0_IRQ,
-       [IRQ_DSL]               = BCM_6358_DSL_IRQ,
-       [IRQ_ENET0]             = BCM_6358_ENET0_IRQ,
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -0,0 +1,60 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_regs.h>
-+
-+static struct resource spi_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static struct bcm63xx_spi_pdata spi_pdata = {
-+      .bus_num                = 0,
-+      .num_chipselect         = 4,
-+      .speed_hz               = 50000000,     /* Fclk */
-+};
-+
-+static struct platform_device bcm63xx_spi_device = {
-+      .name           = "bcm63xx-spi",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(spi_resources),
-+      .resource       = spi_resources,
-+      .dev            = {
-+              .platform_data = &spi_pdata,
-+      },
-+};
-+
-+int __init bcm63xx_spi_register(void)
-+{
-+      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
-+      spi_resources[0].end = spi_resources[0].start;
-+      spi_resources[0].end += RSET_SPI_SIZE - 1;
-+      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-+
-+      /* Fill in platform data */
-+      if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-+              spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE;
-+
-+      if (BCMCPU_IS_6358())
-+              spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE;
-+
-+      return platform_device_register(&bcm63xx_spi_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -108,6 +108,7 @@ enum bcm63xx_regs_set {
- #define RSET_WDT_SIZE                 12
- #define RSET_ENET_SIZE                        2048
- #define RSET_ENETDMA_SIZE             2048
-+#define RSET_SPI_SIZE                 256
- #define RSET_UART_SIZE                        24
- #define RSET_UDC_SIZE                 256
- #define RSET_OHCI_SIZE                        256
-@@ -209,7 +210,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_WDT_BASE             (0xfffe005c)
- #define BCM_6358_UART0_BASE           (0xfffe0100)
- #define BCM_6358_GPIO_BASE            (0xfffe0080)
--#define BCM_6358_SPI_BASE             (0xdeadbeef)
-+#define BCM_6358_SPI_BASE             (0xfffe0800)
- #define BCM_6358_UDC0_BASE            (0xfffe0400)
- #define BCM_6358_OHCI0_BASE           (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE               (0xdeadbeef)
-@@ -428,6 +429,7 @@ static inline unsigned long bcm63xx_regs
-  */
- enum bcm63xx_irq {
-       IRQ_TIMER = 0,
-+      IRQ_SPI,
-       IRQ_UART0,
-       IRQ_DSL,
-       IRQ_UDC0,
-@@ -493,6 +495,7 @@ enum bcm63xx_irq {
-  * 6348 irqs
-  */
- #define BCM_6348_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6348_SPI_IRQ              (IRQ_INTERNAL_BASE + 1)
- #define BCM_6348_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ              (IRQ_INTERNAL_BASE + 4)
- #define BCM_6348_UDC0_IRQ             (IRQ_INTERNAL_BASE + 6)
-@@ -517,6 +520,7 @@ enum bcm63xx_irq {
-  * 6358 irqs
-  */
- #define BCM_6358_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6358_SPI_IRQ              (IRQ_INTERNAL_BASE + 1)
- #define BCM_6358_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
- #define BCM_6358_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
- #define BCM_6358_ENET1_IRQ            (IRQ_INTERNAL_BASE + 6)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -769,5 +769,117 @@
- #define DMIPSPLLCFG_N2_SHIFT          29
- #define DMIPSPLLCFG_N2_MASK           (0x7 << DMIPSPLLCFG_N2_SHIFT)
-+/*************************************************************************
-+ * _REG relative to RSET_SPI
-+ *************************************************************************/
-+
-+/* BCM 6338 SPI core */
-+#define SPI_BCM_6338_SPI_CMD          0x00    /* 16-bits register */
-+#define SPI_BCM_6338_SPI_INT_STATUS   0x02
-+#define SPI_BCM_6338_SPI_MASK_INT_ST  0x03
-+#define SPI_BCM_6338_SPI_INT_MASK     0x04
-+#define SPI_BCM_6338_SPI_ST           0x05
-+#define SPI_BCM_6338_SPI_CLK_CFG      0x06
-+#define SPI_BCM_6338_SPI_FILL_BYTE    0x07
-+#define SPI_BCM_6338_SPI_MSG_TAIL     0x09
-+#define SPI_BCM_6338_SPI_RX_TAIL      0x0b
-+#define SPI_BCM_6338_SPI_MSG_CTL      0x40
-+#define SPI_BCM_6338_SPI_MSG_DATA     0x41
-+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE        0x3f
-+#define SPI_BCM_6338_SPI_RX_DATA      0x80
-+#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6348 SPI core */
-+#define SPI_BCM_6348_SPI_MASK_INT_ST  0x00
-+#define SPI_BCM_6348_SPI_INT_STATUS   0x01
-+#define SPI_BCM_6348_SPI_CMD          0x02    /* 16-bits register */
-+#define SPI_BCM_6348_SPI_FILL_BYTE    0x04
-+#define SPI_BCM_6348_SPI_CLK_CFG      0x05
-+#define SPI_BCM_6348_SPI_ST           0x06
-+#define SPI_BCM_6348_SPI_INT_MASK     0x07
-+#define SPI_BCM_6348_SPI_RX_TAIL      0x08
-+#define SPI_BCM_6348_SPI_MSG_TAIL     0x10
-+#define SPI_BCM_6348_SPI_MSG_DATA     0x40
-+#define SPI_BCM_6348_SPI_MSG_CTL      0x42
-+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE        0x3f
-+#define SPI_BCM_6348_SPI_RX_DATA      0x80
-+#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6358 SPI core */
-+#define SPI_BCM_6358_MSG_CTL          0x00    /* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_MSG_DATA     0x02
-+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE        0x21e
-+
-+#define SPI_BCM_6358_SPI_RX_DATA      0x400
-+#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220
-+
-+#define SPI_BCM_6358_SPI_CMD          0x700   /* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_INT_STATUS   0x702
-+#define SPI_BCM_6358_SPI_MASK_INT_ST  0x703
-+
-+#define SPI_BCM_6358_SPI_INT_MASK     0x704
-+
-+#define SPI_BCM_6358_SPI_STATUS               0x705
-+
-+#define SPI_BCM_6358_SPI_CLK_CFG      0x706
-+
-+#define SPI_BCM_6358_SPI_FILL_BYTE    0x707
-+#define SPI_BCM_6358_SPI_MSG_TAIL     0x709
-+#define SPI_BCM_6358_SPI_RX_TAIL      0x70B
-+
-+/* Shared SPI definitions */
-+
-+/* Message configuration */
-+#define SPI_FD_RW                     0x00
-+#define SPI_HD_W                      0x01
-+#define SPI_HD_R                      0x02
-+#define SPI_BYTE_CNT_SHIFT            0
-+#define SPI_MSG_TYPE_SHIFT            14
-+
-+/* Command */
-+#define SPI_CMD_NOOP                  0x01
-+#define SPI_CMD_SOFT_RESET            0x02
-+#define SPI_CMD_HARD_RESET            0x04
-+#define SPI_CMD_START_IMMEDIATE               0x08
-+#define SPI_CMD_COMMAND_SHIFT         0
-+#define SPI_CMD_COMMAND_MASK          0x000f
-+#define SPI_CMD_DEVICE_ID_SHIFT               4
-+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT        8
-+#define SPI_CMD_ONE_BYTE_SHIFT                11
-+#define SPI_CMD_ONE_WIRE_SHIFT                12
-+#define SPI_DEV_ID_0                  0
-+#define SPI_DEV_ID_1                  1
-+#define SPI_DEV_ID_2                  2
-+#define SPI_DEV_ID_3                  3
-+
-+/* Interrupt mask */
-+#define SPI_INTR_CMD_DONE             0x01
-+#define SPI_INTR_RX_OVERFLOW          0x02
-+#define SPI_INTR_TX_UNDERFLOW         0x04
-+#define SPI_INTR_TX_OVERFLOW          0x08
-+#define SPI_INTR_RX_UNDERFLOW         0x10
-+#define SPI_INTR_CLEAR_ALL            0x1f
-+
-+/* Status */
-+#define SPI_RX_EMPTY                  0x02
-+#define SPI_CMD_BUSY                  0x04
-+#define SPI_SERIAL_BUSY                       0x08
-+
-+/* Clock configuration */
-+#define SPI_CLK_20MHZ                 0x00
-+#define SPI_CLK_0_391MHZ              0x01
-+#define SPI_CLK_0_781MHZ              0x02 /* default */
-+#define SPI_CLK_1_563MHZ              0x03
-+#define SPI_CLK_3_125MHZ              0x04
-+#define SPI_CLK_6_250MHZ              0x05
-+#define SPI_CLK_12_50MHZ              0x06
-+#define SPI_CLK_25MHZ                 0x07
-+#define SPI_CLK_MASK                  0x07
-+#define SPI_SSOFFTIME_MASK            0x38
-+#define SPI_SSOFFTIME_SHIFT           3
-+#define SPI_BYTE_SWAP                 0x80
-+
- #endif /* BCM63XX_REGS_H_ */
---- /dev/null
-+++ b/drivers/spi/bcm63xx_spi.c
-@@ -0,0 +1,628 @@
-+/*
-+ * Broadcom BCM63xx SPI controller support
-+ *
-+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/gpio.h>
-+#include <linux/completion.h>
-+#include <linux/err.h>
-+
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_spi.h>
-+
-+#define PFX           KBUILD_MODNAME
-+#define DRV_VER               "0.1.2"
-+
-+enum bcm63xx_regs_spi {
-+        SPI_CMD,
-+        SPI_INT_STATUS,
-+        SPI_INT_MASK_ST,
-+        SPI_INT_MASK,
-+        SPI_ST,
-+        SPI_CLK_CFG,
-+        SPI_FILL_BYTE,
-+        SPI_MSG_TAIL,
-+        SPI_RX_TAIL,
-+        SPI_MSG_CTL,
-+        SPI_MSG_DATA,
-+        SPI_RX_DATA,
-+};
-+
-+/*
-+ * register offsets
-+ */
-+static const unsigned long bcm96338_regs_spi[] = {
-+      [SPI_CMD]               = SPI_BCM_6338_SPI_CMD,
-+      [SPI_INT_STATUS]        = SPI_BCM_6338_SPI_INT_STATUS,
-+      [SPI_INT_MASK_ST]       = SPI_BCM_6338_SPI_MASK_INT_ST,
-+      [SPI_INT_MASK]          = SPI_BCM_6338_SPI_INT_MASK,
-+      [SPI_ST]                = SPI_BCM_6338_SPI_ST,
-+      [SPI_CLK_CFG]           = SPI_BCM_6338_SPI_CLK_CFG,
-+      [SPI_FILL_BYTE]         = SPI_BCM_6338_SPI_FILL_BYTE,
-+      [SPI_MSG_TAIL]          = SPI_BCM_6338_SPI_MSG_TAIL,
-+      [SPI_RX_TAIL]           = SPI_BCM_6338_SPI_RX_TAIL,
-+      [SPI_MSG_CTL]           = SPI_BCM_6338_SPI_MSG_CTL,
-+      [SPI_MSG_DATA]          = SPI_BCM_6338_SPI_MSG_DATA,
-+      [SPI_RX_DATA]           = SPI_BCM_6338_SPI_RX_DATA,
-+};
-+
-+static const unsigned long bcm96348_regs_spi[] = {
-+      [SPI_CMD]               = SPI_BCM_6348_SPI_CMD,
-+      [SPI_INT_STATUS]        = SPI_BCM_6348_SPI_INT_STATUS,
-+      [SPI_INT_MASK_ST]       = SPI_BCM_6348_SPI_MASK_INT_ST,
-+      [SPI_INT_MASK]          = SPI_BCM_6348_SPI_INT_MASK,
-+      [SPI_ST]                = SPI_BCM_6348_SPI_ST,
-+      [SPI_CLK_CFG]           = SPI_BCM_6348_SPI_CLK_CFG,
-+      [SPI_FILL_BYTE]         = SPI_BCM_6348_SPI_FILL_BYTE,
-+      [SPI_MSG_TAIL]          = SPI_BCM_6348_SPI_MSG_TAIL,
-+      [SPI_RX_TAIL]           = SPI_BCM_6348_SPI_RX_TAIL,
-+      [SPI_MSG_CTL]           = SPI_BCM_6348_SPI_MSG_CTL,
-+      [SPI_MSG_DATA]          = SPI_BCM_6348_SPI_MSG_DATA,
-+      [SPI_RX_DATA]           = SPI_BCM_6348_SPI_RX_DATA,
-+};
-+
-+static const unsigned long bcm96358_regs_spi[] = {
-+      [SPI_CMD]               = SPI_BCM_6358_SPI_CMD,
-+      [SPI_INT_STATUS]        = SPI_BCM_6358_SPI_INT_STATUS,
-+      [SPI_INT_MASK_ST]       = SPI_BCM_6358_SPI_MASK_INT_ST,
-+      [SPI_INT_MASK]          = SPI_BCM_6358_SPI_INT_MASK,
-+      [SPI_ST]                = SPI_BCM_6358_SPI_STATUS,
-+      [SPI_CLK_CFG]           = SPI_BCM_6358_SPI_CLK_CFG,
-+      [SPI_FILL_BYTE]         = SPI_BCM_6358_SPI_FILL_BYTE,
-+      [SPI_MSG_TAIL]          = SPI_BCM_6358_SPI_MSG_TAIL,
-+      [SPI_RX_TAIL]           = SPI_BCM_6358_SPI_RX_TAIL,
-+      [SPI_MSG_CTL]           = SPI_BCM_6358_MSG_CTL,
-+      [SPI_MSG_DATA]          = SPI_BCM_6358_SPI_MSG_DATA,
-+      [SPI_RX_DATA]           = SPI_BCM_6358_SPI_RX_DATA,
-+};
-+
-+
-+#ifdef BCMCPU_RUNTIME_DETECT
-+static const unsigned long *bcm63xx_regs_spi;
-+
-+static __init void bcm63xx_spi_regs_init(void)
-+{
-+      if (BCMCPU_IS_6338())
-+              bcm63xx_regs_spi = bcm96338_regs_spi;
-+      if (BCMCPU_IS_6348())
-+              bcm63xx_regs_spi = bcm96348_regs_spi;
-+      if (BCMCPU_IS_6358())
-+              bcm63xx_regs_spi = bcm96358_regs_spi;
-+}
-+#else
-+static __init void bcm63xx_spi_regs_init(void) { }
-+#endif
-+
-+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+        return bcm63xx_regs_spi[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+switch (reg) {
-+      case SPI_CMD:
-+              return SPI_BCM_6338_SPI_CMD;
-+      case SPI_INT_STATUS:
-+              return SPI_BCM_6338_SPI_INT_STATUS;
-+      case SPI_INT_MASK_ST:
-+              return SPI_BCM_6338_SPI_MASK_INT_ST;
-+      case SPI_INT_MASK:
-+              return SPI_BCM_6338_SPI_INT_MASK;
-+      case SPI_ST:
-+              return SPI_BCM_6338_SPI_ST;
-+      case SPI_CLK_CFG:
-+              return SPI_BCM_6338_SPI_CLK_CFG;
-+      case SPI_FILL_BYTE:
-+              return SPI_BCM_6338_SPI_FILL_BYTE;
-+      case SPI_MSG_TAIL:
-+              return SPI_BCM_6338_SPI_MSG_TAIL;
-+      case SPI_RX_TAIL:
-+              return SPI_BCM_6338_SPI_RX_TAIL;
-+      case SPI_MSG_CTL:
-+              return SPI_BCM_6338_SPI_MSG_CTL;
-+      case SPI_MSG_DATA:
-+              return SPI_BCM_6338_SPI_MSG_DATA;
-+      case SPI_RX_DATA:
-+              return SPI_BCM_6338_SPI_RX_DATA;
-+}
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+switch (reg) {
-+      case SPI_CMD:
-+              return SPI_BCM_6348_SPI_CMD;
-+      case SPI_INT_MASK_ST:
-+              return SPI_BCM_6348_SPI_MASK_INT_ST;
-+      case SPI_INT_MASK:
-+              return SPI_BCM_6348_SPI_INT_MASK;
-+      case SPI_INT_STATUS:
-+              return SPI_BCM_6348_SPI_INT_STATUS;
-+      case SPI_ST:
-+              return SPI_BCM_6348_SPI_ST;
-+      case SPI_CLK_CFG:
-+              return SPI_BCM_6348_SPI_CLK_CFG;
-+      case SPI_FILL_BYTE:
-+              return SPI_BCM_6348_SPI_FILL_BYTE;
-+      case SPI_MSG_TAIL:
-+              return SPI_BCM_6348_SPI_MSG_TAIL;
-+      case SPI_RX_TAIL:
-+              return SPI_BCM_6348_SPI_RX_TAIL;
-+      case SPI_MSG_CTL:
-+              return SPI_BCM_6348_SPI_MSG_CTL;
-+      case SPI_MSG_DATA:
-+              return SPI_BCM_6348_SPI_MSG_DATA;
-+      case SPI_RX_DATA:
-+              return SPI_BCM_6348_SPI_RX_DATA;
-+}
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+switch (reg) {
-+      case SPI_CMD:
-+              return SPI_BCM_6358_SPI_CMD;
-+      case SPI_INT_STATUS:
-+              return SPI_BCM_6358_SPI_INT_STATUS;
-+      case SPI_INT_MASK_ST:
-+              return SPI_BCM_6358_SPI_MASK_INT_ST;
-+      case SPI_INT_MASK:
-+              return SPI_BCM_6358_SPI_INT_MASK;
-+      case SPI_ST:
-+              return SPI_BCM_6358_SPI_STATUS;
-+      case SPI_CLK_CFG:
-+              return SPI_BCM_6358_SPI_CLK_CFG;
-+      case SPI_FILL_BYTE:
-+              return SPI_BCM_6358_SPI_FILL_BYTE;
-+      case SPI_MSG_TAIL:
-+              return SPI_BCM_6358_SPI_MSG_TAIL;
-+      case SPI_RX_TAIL:
-+              return SPI_BCM_6358_SPI_RX_TAIL;
-+      case SPI_MSG_CTL:
-+              return SPI_BCM_6358_MSG_CTL;
-+      case SPI_MSG_DATA:
-+              return SPI_BCM_6358_SPI_MSG_DATA;
-+      case SPI_RX_DATA:
-+              return SPI_BCM_6358_SPI_RX_DATA;
-+}
-+#endif
-+#endif
-+      return 0;
-+}
-+
-+/*
-+ * helpers for the SPI register sets
-+ */
-+#define bcm_spi_readb(b,o)      bcm_readb((b) + bcm63xx_spireg(o))
-+#define bcm_spi_readw(b,o)      bcm_readw((b) + bcm63xx_spireg(o))
-+#define bcm_spi_writeb(v,b,o)   bcm_writeb((v), (b) + bcm63xx_spireg(o))
-+#define bcm_spi_writew(v,b,o)   bcm_writew((v), (b) + bcm63xx_spireg(o))
-+
-+struct bcm63xx_spi {
-+      /* bitbang has to be first */
-+        struct spi_bitbang    bitbang;
-+        struct completion     done;
-+
-+        void __iomem          *regs;
-+        int                   irq;
-+
-+      /* Platform data */
-+        u32                   speed_hz;
-+      unsigned                fifo_size;
-+
-+      /* Data buffers */
-+      const unsigned char     *tx_ptr;
-+      unsigned char           *rx_ptr;
-+      int                     remaining_bytes;
-+
-+      struct clk              *clk;
-+      struct resource         *ioarea;
-+      struct platform_device  *pdev;
-+};
-+
-+static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on)
-+{
-+      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+      u16 val;
-+
-+      val = bcm_spi_readw(bs->regs, SPI_CMD);
-+      if (is_on == BITBANG_CS_INACTIVE)
-+              val |= SPI_CMD_NOOP;
-+      else if (is_on == BITBANG_CS_ACTIVE)
-+              val |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
-+
-+      bcm_spi_writew(val, bs->regs, SPI_CMD);
-+}
-+
-+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-+                                      struct spi_transfer *t)
-+{
-+      u8 bits_per_word;
-+      u8 clk_cfg;
-+      u32 hz;
-+      unsigned int div;
-+
-+      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+
-+      bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-+      hz = (t) ? t->speed_hz : spi->max_speed_hz;
-+      if (bits_per_word != 8) {
-+              dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+                      __func__, bits_per_word);
-+              return -EINVAL;
-+        }
-+
-+      if (spi->chip_select > spi->master->num_chipselect) {
-+              dev_err(&spi->dev, "%s, unsupported slave %d\n",
-+                      __func__, spi->chip_select);
-+              return -EINVAL;
-+      }
-+
-+      /* Check clock setting */
-+      div = (bs->speed_hz / hz);
-+      switch (div) {
-+      case 2:
-+              clk_cfg = SPI_CLK_25MHZ;
-+              break;
-+      case 4:
-+              clk_cfg = SPI_CLK_12_50MHZ;
-+              break;
-+      case 8:
-+              clk_cfg = SPI_CLK_6_250MHZ;
-+              break;
-+      case 16:
-+              clk_cfg = SPI_CLK_3_125MHZ;
-+              break;
-+      case 32:
-+              clk_cfg = SPI_CLK_1_563MHZ;
-+              break;
-+      case 128:
-+              clk_cfg = SPI_CLK_0_781MHZ;
-+              break;
-+      case 64:
-+      default:
-+              /* Set to slowest mode for compatibility */
-+              clk_cfg = SPI_CLK_0_781MHZ;
-+              break;
-+      }
-+
-+      bcm_spi_writeb(clk_cfg, bs->regs, SPI_CLK_CFG);
-+      dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
-+                                                              div, hz, clk_cfg);
-+
-+      return 0;
-+}
-+
-+/* the spi->mode bits understood by this driver: */
-+#define MODEBITS (SPI_CPOL | SPI_CPHA)
-+
-+static int bcm63xx_spi_setup(struct spi_device *spi)
-+{
-+      struct spi_bitbang *bitbang;
-+      struct bcm63xx_spi *bs;
-+      int retval;
-+
-+      bs = spi_master_get_devdata(spi->master);
-+      bitbang = &bs->bitbang;
-+
-+      if (!spi->bits_per_word)
-+              spi->bits_per_word = 8;
-+
-+      if (spi->mode & ~MODEBITS) {
-+              dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-+                      __func__, spi->mode & ~MODEBITS);
-+              return -EINVAL;
-+      }
-+
-+      retval = bcm63xx_spi_setup_transfer(spi, NULL);
-+      if (retval < 0) {
-+              dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-+                      spi->mode & ~MODEBITS);
-+              return retval;
-+      }
-+
-+      dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-+              __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
-+
-+      return 0;
-+}
-+
-+/* Fill the TX FIFO with as many bytes as possible */
-+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-+{
-+        u8 tail;
-+
-+        /* Fill the Tx FIFO with as many bytes as possible */
-+      tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
-+        while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) {
-+                if (bs->tx_ptr)
-+                        bcm_spi_writeb(*bs->tx_ptr++, bs->regs, SPI_MSG_DATA);
-+              else
-+                      bcm_spi_writeb(0, bs->regs, SPI_MSG_DATA);
-+                bs->remaining_bytes--;
-+              tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
-+        }
-+}
-+
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+      u8 msg_ctl;
-+      u16 cmd;
-+
-+      dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-+                              t->tx_buf, t->rx_buf, t->len);
-+
-+      /* Transmitter is inhibited */
-+      bs->tx_ptr = t->tx_buf;
-+      bs->rx_ptr = t->rx_buf;
-+      bs->remaining_bytes = t->len;
-+      init_completion(&bs->done);
-+
-+      bcm63xx_spi_fill_tx_fifo(bs);
-+
-+      /* Enable the command done interrupt which
-+       * we use to determine completion of a command */
-+      bcm_spi_writeb(SPI_INTR_CMD_DONE, bs->regs, SPI_INT_MASK);
-+
-+      /* Fill in the Message control register */
-+      msg_ctl = bcm_spi_readb(bs->regs, SPI_MSG_CTL);
-+      msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT);
-+      msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
-+      bcm_spi_writeb(msg_ctl, bs->regs, SPI_MSG_CTL);
-+
-+      /* Issue the transfer */
-+      cmd = bcm_spi_readw(bs->regs, SPI_CMD);
-+      cmd |= SPI_CMD_START_IMMEDIATE;
-+      cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+      bcm_spi_writew(cmd, bs->regs, SPI_CMD);
-+
-+      wait_for_completion(&bs->done);
-+
-+      /* Disable the CMD_DONE interrupt */
-+      bcm_spi_writeb(~(SPI_INTR_CMD_DONE), bs->regs, SPI_INT_MASK);
-+
-+      return t->len - bs->remaining_bytes;
-+}
-+
-+/* This driver supports single master mode only. Hence
-+ * CMD_DONE is the only interrupt we care about
-+ */
-+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
-+{
-+      struct spi_master *master = (struct spi_master *)dev_id;
-+      struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+      u8 intr;
-+      u16 cmd;
-+
-+      /* Read interupts and clear them immediately */
-+      intr = bcm_spi_readb(bs->regs, SPI_INT_STATUS);
-+      bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK);
-+
-+      /* A tansfer completed */
-+      if (intr & SPI_INTR_CMD_DONE) {
-+              u8 rx_empty;
-+
-+              rx_empty = bcm_spi_readb(bs->regs, SPI_ST);
-+              /* Read out all the data */
-+              while ((rx_empty & SPI_RX_EMPTY) == 0) {
-+                      u8 data;
-+
-+                      data = bcm_spi_readb(bs->regs, SPI_RX_DATA);
-+                      if (bs->rx_ptr)
-+                              *bs->rx_ptr++ = data;
-+
-+                      rx_empty = bcm_spi_readb(bs->regs, SPI_RX_EMPTY);
-+              }
-+
-+              /* See if there is more data to send */
-+              if (bs->remaining_bytes > 0) {
-+                      bcm63xx_spi_fill_tx_fifo(bs);
-+
-+                      /* Start the transfer */
-+                      cmd = bcm_spi_readw(bs->regs, SPI_CMD);
-+                      cmd |= SPI_CMD_START_IMMEDIATE;
-+                      cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+                      bcm_spi_writew(cmd, bs->regs, SPI_CMD);
-+              } else
-+                      complete(&bs->done);
-+      }
-+
-+      return IRQ_HANDLED;
-+}
-+
-+
-+static int __init bcm63xx_spi_probe(struct platform_device *pdev)
-+{
-+      struct resource *r;
-+      struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
-+      int irq;
-+      struct spi_master *master;
-+      struct clk *clk;
-+      struct bcm63xx_spi *bs;
-+      int ret;
-+
-+      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      if (!r) {
-+              ret = -ENXIO;
-+              goto out;
-+      }
-+
-+      irq = platform_get_irq(pdev, 0);
-+      if (irq < 0) {
-+              ret = -ENXIO;
-+              goto out;
-+      }
-+
-+      bcm63xx_spi_regs_init();
-+
-+      clk = clk_get(&pdev->dev, "spi");
-+      if (IS_ERR(clk)) {
-+              dev_err(&pdev->dev, "No clock for device\n");
-+              ret = -ENODEV;
-+              goto out;
-+      }
-+
-+      master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi));
-+      if (!master) {
-+              ret = -ENOMEM;
-+              goto out_free;
-+      }
-+
-+      bs = spi_master_get_devdata(master);
-+      bs->bitbang.master = spi_master_get(master);
-+      bs->bitbang.chipselect = bcm63xx_spi_chipselect;
-+      bs->bitbang.setup_transfer = bcm63xx_spi_setup_transfer;
-+      bs->bitbang.txrx_bufs = bcm63xx_txrx_bufs;
-+      bs->bitbang.master->setup = bcm63xx_spi_setup;
-+      init_completion(&bs->done);
-+
-+      platform_set_drvdata(pdev, master);
-+        bs->pdev = pdev;
-+
-+      if (!request_mem_region(r->start,
-+                      r->end - r->start, PFX)) {
-+              ret = -ENXIO;
-+              goto out_free;
-+      }
-+
-+        bs->regs = ioremap_nocache(r->start, r->end - r->start);
-+      if (!bs->regs) {
-+              printk(KERN_ERR PFX " unable to ioremap regs\n");
-+              ret = -ENOMEM;
-+              goto out_free;
-+      }
-+      bs->irq = irq;
-+      bs->clk = clk;
-+      bs->fifo_size = pdata->fifo_size;
-+
-+      ret = request_irq(irq, bcm63xx_spi_interrupt, 0,
-+                              pdev->name, master);
-+      if (ret) {
-+              printk(KERN_ERR PFX " unable to request irq\n");
-+              goto out_unmap;
-+      }
-+
-+      master->bus_num = pdata->bus_num;
-+      master->num_chipselect = pdata->num_chipselect;
-+      bs->speed_hz = pdata->speed_hz;
-+
-+      /* Initialize hardware */
-+      clk_enable(bs->clk);
-+      bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK);
-+
-+      dev_info(&pdev->dev, " at 0x%08x (irq %d, FIFOs size %d) v%s\n",
-+                              r->start, irq, bs->fifo_size, DRV_VER);
-+
-+      ret = spi_bitbang_start(&bs->bitbang);
-+      if (ret) {
-+              dev_err(&pdev->dev, "spi_bitbang_start FAILED\n");
-+              goto out_reset_hw;
-+      }
-+
-+      return ret;
-+
-+out_reset_hw:
-+      clk_disable(clk);
-+      free_irq(irq, master);
-+out_unmap:
-+      iounmap(bs->regs);
-+out_free:
-+      clk_put(clk);
-+      spi_master_put(master);
-+out:
-+      return ret;
-+}
-+
-+static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
-+{
-+      struct spi_master       *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
-+
-+      spi_bitbang_stop(&bs->bitbang);
-+      clk_disable(bs->clk);
-+      clk_put(bs->clk);
-+      free_irq(bs->irq, master);
-+      iounmap(bs->regs);
-+      platform_set_drvdata(pdev, 0);
-+      spi_master_put(bs->bitbang.master);
-+
-+      return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+      struct spi_master       *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
-+
-+        clk_disable(bs->clk);
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_spi_resume(struct platform_device *pdev)
-+{
-+      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
-+      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
-+
-+      clk_enable(bs->clk);
-+
-+      return 0;
-+}
-+#else
-+#define bcm63xx_spi_suspend   NULL
-+#define bcm63xx_spi_resume    NULL
-+#endif
-+
-+static struct platform_driver bcm63xx_spi_driver = {
-+      .driver = {
-+              .name   = "bcm63xx-spi",
-+              .owner  = THIS_MODULE,
-+      },
-+      .probe          = bcm63xx_spi_probe,
-+      .remove         = bcm63xx_spi_remove,
-+      .suspend        = bcm63xx_spi_suspend,
-+      .resume         = bcm63xx_spi_resume,
-+};
-+
-+
-+static int __init bcm63xx_spi_init(void)
-+{
-+      return platform_driver_register(&bcm63xx_spi_driver);
-+}
-+
-+static void __exit bcm63xx_spi_exit(void)
-+{
-+      platform_driver_unregister(&bcm63xx_spi_driver);
-+}
-+
-+module_init(bcm63xx_spi_init);
-+module_exit(bcm63xx_spi_exit);
-+
-+MODULE_ALIAS("platform:bcm63xx_spi");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VER);
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -60,6 +60,13 @@ config SPI_ATMEL
-         This selects a driver for the Atmel SPI Controller, present on
-         many AT32 (AVR32) and AT91 (ARM) chips.
-+config SPI_BCM63XX
-+      tristate "Broadcom BCM63xx SPI controller"
-+      depends on BCM63XX
-+      select SPI_BITBANG
-+      help
-+        This is the SPI controller master driver for Broadcom BCM63xx SoC.
-+
- config SPI_BFIN
-       tristate "SPI controller driver for ADI Blackfin5xx"
-       depends on BLACKFIN
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_SPI_TXX9)                       += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX)              += xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI)              += spi_sh_sci.o
- obj-$(CONFIG_SPI_STMP3XXX)            += spi_stmp.o
-+obj-$(CONFIG_SPI_BCM63XX)             += bcm63xx_spi.o
- #     ... add above this line ...
- # SPI protocol drivers (device/link on bus)
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -0,0 +1,15 @@
-+#ifndef BCM63XX_DEV_SPI_H
-+#define BCM63XX_DEV_SPI_H
-+
-+#include <linux/types.h>
-+
-+int __init bcm63xx_spi_register(void);
-+
-+struct bcm63xx_spi_pdata {
-+      unsigned int    fifo_size;
-+      int             bus_num;
-+      int             num_chipselect;
-+      u32             speed_hz;
-+};
-+
-+#endif /* BCM63XX_DEV_SPI_H */
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
-+                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -30,6 +30,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_udc.h>
-+#include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
- #define PFX   "board_bcm963xx: "
-@@ -1509,6 +1510,9 @@ int __init board_register_devices(void)
-       if (board.has_udc0)
-               bcm63xx_udc_register();
-+      if (!BCMCPU_IS_6345())
-+              bcm63xx_spi_register();
-+
-       /* Generate MAC address for WLAN and
-        * register our SPROM */
- #ifdef CONFIG_SSB_PCIHOST
diff --git a/target/linux/brcm63xx/patches-2.6.32/250-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.32/250-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index cf82af8..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1352,6 +1352,8 @@ void __init board_prom_init(void)
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -402,6 +402,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
- /*************************************************************************
diff --git a/target/linux/brcm63xx/patches-2.6.32/260-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.32/260-no_ehci_over_current_check.patch
deleted file mode 100644 (file)
index 9cc3006..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -741,11 +741,13 @@ static int ehci_hub_control (
-                        * power switching; they're allowed to just limit the
-                        * current.  khubd will turn the power back on.
-                        */
-+#ifndef CONFIG_BCM63XX
-                       if (HCS_PPC (ehci->hcs_params)){
-                               ehci_writel(ehci,
-                                       temp & ~(PORT_RWC_BITS | PORT_POWER),
-                                       status_reg);
-                       }
-+#endif
-               }
-               /* whoever resumes must GetPortStatus to complete it!! */
diff --git a/target/linux/brcm63xx/patches-2.6.32/300-wl_exports.patch b/target/linux/brcm63xx/patches-2.6.32/300-wl_exports.patch
deleted file mode 100644 (file)
index 44375dc..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -46,6 +46,13 @@ static unsigned int mac_addr_used;
- static struct board_info board;
- /*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
-+/*
-  * known 6338 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1286,6 +1293,7 @@ void __init board_prom_init(void)
-       /* extract nvram data */
-       memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+      memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
-       /* check checksum before using data */
-       if (nvram.version <= 4)
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */