0001-ramips-add-support-for-Nexx-WT3020-devices.patch

   1 From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001
   2 From: Roger Pueyo Centelles <roger.pueyo@guifi.net>
   3 Date: Sun, 19 Oct 2014 17:50:01 +0200
   4 Subject: [PATCH] ramips: add support for Nexx WT3020 devices
   5
   6 ---
   7  target/linux/ramips/base-files/etc/board.d/01_leds |   3 +
   8  .../linux/ramips/base-files/etc/board.d/02_network |   1 +
   9  target/linux/ramips/base-files/etc/diag.sh         |   3 +
  10  target/linux/ramips/base-files/lib/ramips.sh       |   3 +
  11  .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
  12  target/linux/ramips/dts/WT3020-4M.dts              | 100 +++++++++++++++++++++
  13  target/linux/ramips/dts/WT3020-8M.dts              | 100 +++++++++++++++++++++
  14  target/linux/ramips/image/Makefile                 |   2 +
  15  8 files changed, 213 insertions(+)
  16  create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
  17  create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
  18
  19 diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
  20 index 26f384d..7ca7ffb 100755
  21 --- a/target/linux/ramips/base-files/etc/board.d/01_leds
  22 +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
  23 @@ -213,6 +213,9 @@ case $board in
  24         wt1520)
  25                 set_wifi_led "rt2800pci-phy0::radio"
  26                 ;;
  27 +       wt3020)
  28 +               ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
  29 +               ;;
  30         y1 |\
  31         y1s)
  32                 ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
  33 diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
  34 index 7ecec5f..ff8fbc0 100755
  35 --- a/target/linux/ramips/base-files/etc/board.d/02_network
  36 +++ b/target/linux/ramips/base-files/etc/board.d/02_network
  37 @@ -127,6 +127,7 @@ ramips_setup_interfaces()
  38         hg255d | \
  39         rt-n14u | \
  40         wrtnode | \
  41 +       wt3020 | \
  42         ur-326n4g | \
  43         zbt-wa05)
  44                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  45 diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
  46 index aed7d6a..2977099 100755
  47 --- a/target/linux/ramips/base-files/etc/diag.sh
  48 +++ b/target/linux/ramips/base-files/etc/diag.sh
  49 @@ -170,6 +170,9 @@ get_status_led() {
  50         nexx-wt1520)
  51                 status_led="nexx-wt1520:white:power"
  52                 ;;
  53 +       nexx-wt3020)
  54 +               status_led="nexx:blue:power"
  55 +               ;;
  56         mzk-w300nh2)
  57                 status_led="mzkw300nh2:green:power"
  58                 ;;
  59 diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
  60 index 08c5dff..88fa623 100755
  61 --- a/target/linux/ramips/base-files/lib/ramips.sh
  62 +++ b/target/linux/ramips/base-files/lib/ramips.sh
  63 @@ -184,6 +184,9 @@ ramips_board_detect() {
  64         *"Nexx WT1520")
  65                 name="wt1520"
  66                 ;;
  67 +       *"Nexx WT3020")
  68 +               name="wt3020"
  69 +               ;;
  70         *"NW718")
  71                 name="nw718"
  72                 ;;
  73 diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
  74 index 61a0935..c9a418e 100755
  75 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
  76 +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
  77 @@ -97,6 +97,7 @@ platform_check_image() {
  78         wr8305rt |\
  79         wrtnode |\
  80         wt1520 |\
  81 +       wt3020 |\
  82         x5 |\
  83         x8 |\
  84         y1 |\
  85 diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts
  86 new file mode 100644
  87 index 0000000..7583680
  88 --- /dev/null
  89 +++ b/target/linux/ramips/dts/WT3020-4M.dts
  90 @@ -0,0 +1,100 @@
  91 +/dts-v1/;
  92 +
  93 +/include/ "mt7620n.dtsi"
  94 +
  95 +/ {
  96 +       compatible = "wt3020", "ralink,mt7620n-soc";
  97 +       model = "Nexx WT3020";
  98 +
  99 +       palmbus@10000000 {
 100 +                gpio2: gpio@660 {
 101 +                        status = "okay";
 102 +                };
 103 +
 104 +                gpio3: gpio@688 {
 105 +                        status = "okay";
 106 +                };
 107 +
 108 +               spi@b00 {
 109 +                       status = "okay";
 110 +
 111 +                       m25p80@0 {
 112 +                               #address-cells = <1>;
 113 +                               #size-cells = <1>;
 114 +                               compatible = "w25q32";
 115 +                               reg = <0 0>;
 116 +                               linux,modalias = "m25p80", "w25q32";
 117 +                               spi-max-frequency = <10000000>;
 118 +
 119 +                               partition@0 {
 120 +                                       label = "u-boot";
 121 +                                       reg = <0x0 0x30000>;
 122 +                                       read-only;
 123 +                               };
 124 +
 125 +                               partition@30000 {
 126 +                                       label = "u-boot-env";
 127 +                                       reg = <0x30000 0x10000>;
 128 +                                       read-only;
 129 +                               };
 130 +
 131 +                               factory: partition@40000 {
 132 +                                       label = "factory";
 133 +                                       reg = <0x40000 0x10000>;
 134 +                                       read-only;
 135 +                               };
 136 +
 137 +                               partition@50000 {
 138 +                                       label = "firmware";
 139 +                                       reg = <0x50000 0x3b0000>;
 140 +                               };
 141 +                       };
 142 +               };
 143 +       };
 144 +
 145 +       ehci@101c0000 {
 146 +               status = "okay";
 147 +       };
 148 +
 149 +       ohci@101c1000 {
 150 +               status = "okay";
 151 +       };
 152 +
 153 +       ethernet@10100000 {
 154 +               mtd-mac-address = <&factory 0x4>;
 155 +               ralink,port-map = "wllll";
 156 +       };
 157 +
 158 +       wmac@10180000 {
 159 +               ralink,mtd-eeprom = <&factory 0>;
 160 +       };
 161 +
 162 +       pinctrl {
 163 +               state_default: pinctrl0 {
 164 +                       default {
 165 +                               ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
 166 +                               ralink,function = "gpio";
 167 +                       };
 168 +               };
 169 +       };
 170 +
 171 +       gpio-keys-polled {
 172 +               compatible = "gpio-keys-polled";
 173 +               #address-cells = <1>;
 174 +               #size-cells = <0>;
 175 +               poll-interval = <20>;
 176 +               reset {
 177 +                       label = "reset";
 178 +                       gpios = <&gpio0 1 1>;
 179 +                       linux,code = <0x198>;
 180 +               };
 181 +       };
 182 +
 183 +        gpio-leds {
 184 +                compatible = "gpio-leds";
 185 +                power {
 186 +                        label = "nexx:blue:power";
 187 +                        gpios = <&gpio3 0 0>;
 188 +                };
 189 +        };
 190 +};
 191 diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
 192 new file mode 100644
 193 index 0000000..5fa7c92
 194 --- /dev/null
 195 +++ b/target/linux/ramips/dts/WT3020-8M.dts
 196 @@ -0,0 +1,100 @@
 197 +/dts-v1/;
 198 +
 199 +/include/ "mt7620n.dtsi"
 200 +
 201 +/ {
 202 +       compatible = "wt3020", "ralink,mt7620n-soc";
 203 +       model = "Nexx WT3020";
 204 +
 205 +       palmbus@10000000 {
 206 +                gpio2: gpio@660 {
 207 +                        status = "okay";
 208 +                };
 209 +
 210 +                gpio3: gpio@688 {
 211 +                        status = "okay";
 212 +                };
 213 +
 214 +               spi@b00 {
 215 +                       status = "okay";
 216 +
 217 +                       m25p80@0 {
 218 +                               #address-cells = <1>;
 219 +                               #size-cells = <1>;
 220 +                               compatible = "w25q64";
 221 +                               reg = <0 0>;
 222 +                               linux,modalias = "m25p80", "w25q64";
 223 +                               spi-max-frequency = <10000000>;
 224 +
 225 +                               partition@0 {
 226 +                                       label = "u-boot";
 227 +                                       reg = <0x0 0x30000>;
 228 +                                       read-only;
 229 +                               };
 230 +
 231 +                               partition@30000 {
 232 +                                       label = "u-boot-env";
 233 +                                       reg = <0x30000 0x10000>;
 234 +                                       read-only;
 235 +                               };
 236 +
 237 +                               factory: partition@40000 {
 238 +                                       label = "factory";
 239 +                                       reg = <0x40000 0x10000>;
 240 +                                       read-only;
 241 +                               };
 242 +
 243 +                               partition@50000 {
 244 +                                       label = "firmware";
 245 +                                       reg = <0x50000 0x7b0000>;
 246 +                               };
 247 +                       };
 248 +               };
 249 +       };
 250 +
 251 +       ehci@101c0000 {
 252 +               status = "okay";
 253 +       };
 254 +
 255 +       ohci@101c1000 {
 256 +               status = "okay";
 257 +       };
 258 +
 259 +       ethernet@10100000 {
 260 +               mtd-mac-address = <&factory 0x4>;
 261 +               ralink,port-map = "wllll";
 262 +       };
 263 +
 264 +       wmac@10180000 {
 265 +               ralink,mtd-eeprom = <&factory 0>;
 266 +       };
 267 +
 268 +       pinctrl {
 269 +               state_default: pinctrl0 {
 270 +                       default {
 271 +                               ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
 272 +                               ralink,function = "gpio";
 273 +                       };
 274 +               };
 275 +       };
 276 +
 277 +       gpio-keys-polled {
 278 +               compatible = "gpio-keys-polled";
 279 +               #address-cells = <1>;
 280 +               #size-cells = <0>;
 281 +               poll-interval = <20>;
 282 +               reset {
 283 +                       label = "reset";
 284 +                       gpios = <&gpio0 1 1>;
 285 +                       linux,code = <0x198>;
 286 +               };
 287 +       };
 288 +
 289 +        gpio-leds {
 290 +                compatible = "gpio-leds";
 291 +                power {
 292 +                        label = "nexx:blue:power";
 293 +                        gpios = <&gpio3 0 0>;
 294 +                };
 295 +        };
 296 +};
 297 diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
 298 index f048caf..a93b82c 100644
 299 --- a/target/linux/ramips/image/Makefile
 300 +++ b/target/linux/ramips/image/Makefile
 301 @@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
 302  Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
 303  Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
 304  Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 305 +Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
 306  Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
 307
 308  ifeq ($(SUBTARGET),mt7620n)
 309 @@ -778,6 +779,7 @@ define Image/Build/Profile/Default
 310         $(call Image/Build/Profile/RT-N14U,$(1))
 311         $(call Image/Build/Profile/WR8305RT,$(1))
 312         $(call Image/Build/Profile/WRTNODE,$(1))
 313 +       $(call Image/Build/Profile/WT3020,$(1))
 314         $(call Image/Build/Profile/ZBT-WA05,$(1))
 315  endef
 316  endif
 317 --
 318 2.1.1
 319