openwrt/package/base-files/brcm-2.4/etc/init.d/S05netconfig

   1 #!/bin/sh
   2 # Copyright (C) 2006 OpenWrt.org
   3
   4 [ -e /etc/config/network ] && exit 0
   5
   6 mkdir -p /etc/config
   7
   8 (
   9         if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
  10                 # WGT634u
  11                 echo boardtype=wgt634u
  12         else
  13                 strings /dev/mtdblock/3
  14         fi
  15 ) | awk '
  16 function p(name) {
  17         if (c[name] != "") print name "=\"" c[name] "\""
  18 }
  19
  20 BEGIN {
  21         FS="="
  22         c["lan_ifname"]="br0"
  23         c["lan_ifnames"]="vlan0 eth1"
  24         c["wan_proto"]="none"
  25         c["wan_ifname"]="vlan1"
  26         c["vlan0ports"]="1 2 3 4 5*"
  27         c["vlan1ports"]="0 5"
  28 }
  29
  30 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
  31         nvram[$1] = $2
  32 }
  33
  34 END {
  35         # v1 hardware
  36         if (nvram["boardtype"] == "bcm94710dev") {
  37                 # Linksys WRT54G v1.x
  38                 if (nvram["boardnum"] == "42") {
  39                         c["vlan0ports"]=""
  40                         c["vlan1ports"]=""
  41                         c["lan_ifnames"]="vlan2 eth2"
  42                 }
  43
  44                 # Asus WL-500g
  45                 if (nvram["boardnum"] == "asusX") {
  46                         c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
  47                         # wan_ifname=eth1
  48                 }
  49         }
  50         if (nvram["boardtype"] == "wgt634u") {
  51                 c["vlan0ports"] = "0 1 2 3 5*"
  52                 c["vlan1ports"] = "4 5"
  53                 c["lan_ifnames"] = "vlan0 ath0"
  54         }
  55         if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
  56                 c["vlan0ports"] = "0 1 2 3 5*"
  57                 c["vlan1ports"] = "4 5"
  58         }
  59
  60         # WAP54G
  61         if ((nvram["boardnum"] == "2") || \
  62                 (nvram["boardnum"] == "1024")) {
  63                 c["lan_ifnames"]="eth0 eth1"
  64                 c["wan_ifname"]=""
  65         }
  66
  67         print "#### VLAN configuration "
  68         print "vlan0hwname=et0"
  69         print "vlan1hwname=et0"
  70         p("vlan0ports")
  71         p("vlan1ports")
  72         print ""
  73         print ""
  74
  75         print "#### LAN configuration"
  76         print "lan_proto=\"static\""
  77         p("lan_ifname")
  78         p("lan_ifnames")
  79         print "lan_ipaddr=\"192.168.1.1\""
  80         print "lan_netmask=\"255.255.255.0\""
  81         print "# lan_dns=\"192.168.1.1\""
  82         print "# lan_gateway=\"192.168.1.1\""
  83
  84         print ""
  85         print ""
  86
  87         print "#### WAN configuration"
  88         print "# wan_proto: WAN protocol, available protocols:"
  89         print "#   none: disable"
  90         print "#   dhcp: DHCP"
  91         print "#   static: Static IP"
  92         print "#   pppoe: PPP over Ethernet"
  93         print "#   pptp: Point-to-Point tunneling Protocol"
  94         print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
  95         print ""
  96         print "wan_proto=dhcp"
  97         p("wan_ifname")
  98         print "wan_device=\"" c["wan_ifname"] "\""
  99         print "# wan_ipaddr=\"192.168.0.2\""
 100         print "# wan_netmask=\"255.255.255.0\""
 101         print "# wan_gateway=\"192.168.0.1\""
 102         print "# wan_dns=\"192.168.0.1\""
 103         print ""
 104         print "## PPP over Ethernet and PPTP"
 105         print "# wan_ifname=\"ppp0\""
 106         print "# ppp_username=\"my_username\""
 107         print "# ppp_passwd=\"my_password\""
 108         print "# pptp_server_ip=\"192.168.0.1\""
 109 }
 110 ' > /etc/config/network