package/mac80211/patches/000-kconfig.patch

   1 --- /dev/null
   2 +++ b/net/mac80211/Kconfig
   3 @@ -0,0 +1,198 @@
   4 +config MAC80211
   5 +       tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
   6 +       select CRYPTO
   7 +       select CRYPTO_ECB
   8 +       select CRYPTO_ARC4
   9 +       select CRYPTO_AES
  10 +       select CRC32
  11 +       select WIRELESS_EXT
  12 +       select CFG80211
  13 +       ---help---
  14 +         This option enables the hardware independent IEEE 802.11
  15 +         networking stack.
  16 +
  17 +menu "Rate control algorithm selection"
  18 +       depends on MAC80211 != n
  19 +
  20 +config MAC80211_RC_PID
  21 +       bool "PID controller based rate control algorithm" if EMBEDDED
  22 +       default y
  23 +       ---help---
  24 +         This option enables a TX rate control algorithm for
  25 +         mac80211 that uses a PID controller to select the TX
  26 +         rate.
  27 +
  28 +choice
  29 +       prompt "Default rate control algorithm"
  30 +       default MAC80211_RC_DEFAULT_PID
  31 +       ---help---
  32 +         This option selects the default rate control algorithm
  33 +         mac80211 will use. Note that this default can still be
  34 +         overriden through the ieee80211_default_rc_algo module
  35 +         parameter if different algorithms are available.
  36 +
  37 +config MAC80211_RC_DEFAULT_PID
  38 +       bool "PID controller based rate control algorithm"
  39 +       depends on MAC80211_RC_PID
  40 +       ---help---
  41 +         Select the PID controller based rate control as the
  42 +         default rate control algorithm. You should choose
  43 +         this unless you know what you are doing.
  44 +
  45 +endchoice
  46 +
  47 +config MAC80211_RC_DEFAULT
  48 +       string
  49 +       default "pid" if MAC80211_RC_DEFAULT_PID
  50 +       default ""
  51 +
  52 +endmenu
  53 +
  54 +config MAC80211_MESH
  55 +       bool "Enable mac80211 mesh networking (pre-802.11s) support"
  56 +       depends on MAC80211 && EXPERIMENTAL
  57 +       ---help---
  58 +        This options enables support of Draft 802.11s mesh networking.
  59 +        The implementation is based on Draft 1.08 of the Mesh Networking
  60 +        amendment. For more information visit http://o11s.org/.
  61 +
  62 +
  63 +config MAC80211_LEDS
  64 +       bool "Enable LED triggers"
  65 +       depends on MAC80211
  66 +       select NEW_LEDS
  67 +       select LEDS_TRIGGERS
  68 +       ---help---
  69 +         This option enables a few LED triggers for different
  70 +         packet receive/transmit events.
  71 +
  72 +config MAC80211_DEBUGFS
  73 +       bool "Export mac80211 internals in DebugFS"
  74 +       depends on MAC80211 && DEBUG_FS
  75 +       ---help---
  76 +         Select this to see extensive information about
  77 +         the internal state of mac80211 in debugfs.
  78 +
  79 +         Say N unless you know you need this.
  80 +
  81 +menuconfig MAC80211_DEBUG_MENU
  82 +       bool "Select mac80211 debugging features"
  83 +       depends on MAC80211
  84 +       ---help---
  85 +         This option collects various mac80211 debug settings.
  86 +
  87 +config MAC80211_DEBUG_PACKET_ALIGNMENT
  88 +       bool "Enable packet alignment debugging"
  89 +       depends on MAC80211_DEBUG_MENU
  90 +       ---help---
  91 +         This option is recommended for driver authors and strongly
  92 +         discouraged for everybody else, it will trigger a warning
  93 +         when a driver hands mac80211 a buffer that is aligned in
  94 +         a way that will cause problems with the IP stack on some
  95 +         architectures.
  96 +
  97 +         Say N unless you're writing a mac80211 based driver.
  98 +
  99 +config MAC80211_NOINLINE
 100 +       bool "Do not inline TX/RX handlers"
 101 +       depends on MAC80211_DEBUG_MENU
 102 +       ---help---
 103 +         This option affects code generation in mac80211, when
 104 +         selected some functions are marked "noinline" to allow
 105 +         easier debugging of problems in the transmit and receive
 106 +         paths.
 107 +
 108 +         This option increases code size a bit and inserts a lot
 109 +         of function calls in the code, but is otherwise safe to
 110 +         enable.
 111 +
 112 +         If unsure, say N unless you expect to be finding problems
 113 +         in mac80211.
 114 +
 115 +config MAC80211_VERBOSE_DEBUG
 116 +       bool "Verbose debugging output"
 117 +       depends on MAC80211_DEBUG_MENU
 118 +       ---help---
 119 +         Selecting this option causes mac80211 to print out
 120 +         many debugging messages. It should not be selected
 121 +         on production systems as some of the messages are
 122 +         remotely triggerable.
 123 +
 124 +         Do not select this option.
 125 +
 126 +config MAC80211_HT_DEBUG
 127 +       bool "Verbose HT debugging"
 128 +       depends on MAC80211_DEBUG_MENU
 129 +       ---help---
 130 +         This option enables 802.11n High Throughput features
 131 +         debug tracing output.
 132 +
 133 +         It should not be selected on production systems as some
 134 +         of the messages are remotely triggerable.
 135 +
 136 +         Do not select this option.
 137 +
 138 +config MAC80211_TKIP_DEBUG
 139 +       bool "Verbose TKIP debugging"
 140 +       depends on MAC80211_DEBUG_MENU
 141 +       ---help---
 142 +         Selecting this option causes mac80211 to print out
 143 +         very verbose TKIP debugging messages. It should not
 144 +         be selected on production systems as those messages
 145 +         are remotely triggerable.
 146 +
 147 +         Do not select this option.
 148 +
 149 +config MAC80211_IBSS_DEBUG
 150 +       bool "Verbose IBSS debugging"
 151 +       depends on MAC80211_DEBUG_MENU
 152 +       ---help---
 153 +         Selecting this option causes mac80211 to print out
 154 +         very verbose IBSS debugging messages. It should not
 155 +         be selected on production systems as those messages
 156 +         are remotely triggerable.
 157 +
 158 +         Do not select this option.
 159 +
 160 +config MAC80211_VERBOSE_PS_DEBUG
 161 +       bool "Verbose powersave mode debugging"
 162 +       depends on MAC80211_DEBUG_MENU
 163 +       ---help---
 164 +         Selecting this option causes mac80211 to print out very
 165 +         verbose power save mode debugging messages (when mac80211
 166 +         is an AP and has power saving stations.)
 167 +         It should not be selected on production systems as those
 168 +         messages are remotely triggerable.
 169 +
 170 +         Do not select this option.
 171 +
 172 +config MAC80211_VERBOSE_MPL_DEBUG
 173 +       bool "Verbose mesh peer link debugging"
 174 +       depends on MAC80211_DEBUG_MENU
 175 +       depends on MAC80211_MESH
 176 +       ---help---
 177 +         Selecting this option causes mac80211 to print out very
 178 +         verbose mesh peer link debugging messages (when mac80211
 179 +         is taking part in a mesh network).
 180 +         It should not be selected on production systems as those
 181 +         messages are remotely triggerable.
 182 +
 183 +         Do not select this option.
 184 +
 185 +config MAC80211_DEBUG_COUNTERS
 186 +       bool "Extra statistics for TX/RX debugging"
 187 +       depends on MAC80211_DEBUG_MENU
 188 +       depends on MAC80211_DEBUGFS
 189 +       ---help---
 190 +         Selecting this option causes mac80211 to keep additional
 191 +         and very verbose statistics about TX and RX handler use
 192 +         and show them in debugfs.
 193 +
 194 +         If unsure, say N.
 195 +
 196 +config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
 197 +       bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
 198 +       depends on MAC80211_DEBUG_MENU
 199 +       ---help---
 200 +         Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
 201 +         debug messages.