[adm5120] refactor kernel code (part 1), mark it as broken now
[openwrt/svn-archive/archive.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / edimax.c
1 /*
2 * $Id$
3 *
4 * Edimax boards
5 *
6 * Copyright (C) 2007 OpenWrt.org
7 * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the
21 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22 * Boston, MA 02110-1301, USA.
23 *
24 */
25
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28
29 #include <asm/bootinfo.h>
30 #include <asm/gpio.h>
31
32 #include <asm/mach-adm5120/adm5120_board.h>
33 #include <asm/mach-adm5120/adm5120_platform.h>
34
35 static struct mtd_partition br6104k_partitions[] = {
36 {
37 .name = "admboot",
38 .offset = 0,
39 .size = 32*1024,
40 .mask_flags = MTD_WRITEABLE,
41 } , {
42 .name = "config",
43 .offset = MTDPART_OFS_APPEND,
44 .size = 32*1024,
45 } , {
46 .name = "firmware",
47 .offset = MTDPART_OFS_APPEND,
48 .size = MTDPART_SIZ_FULL,
49 }
50 };
51
52 static struct platform_device *br6104k_devices[] __initdata = {
53 &adm5120_flash0_device,
54 };
55
56 static void __init br6104k_setup(void) {
57 /* setup data for flash0 device */
58 adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
59 adm5120_flash0_data.parts = br6104k_partitions;
60
61 /* TODO: setup mac addresses, if possible */
62 }
63
64 static struct adm5120_board br6104k_board __initdata = {
65 .mach_type = MACH_ADM5120_BR6104K,
66 .name = "Edimax BR-6104K",
67 .board_setup = br6104k_setup,
68 .num_eth_ports = 5,
69 .num_devices = ARRAY_SIZE(br6104k_devices),
70 .devices = br6104k_devices,
71 };
72
73 static int __init register_boards(void)
74 {
75 adm5120_board_register(&br6104k_board);
76 return 0;
77 }
78
79 pure_initcall(register_boards);