netifd: Improve IPv6-ULA assignment handling
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / base-files / etc / defconfig / wndr3700 / network
1 config interface loopback
2 option ifname lo
3 option proto static
4 option ipaddr 127.0.0.1
5 option netmask 255.0.0.0
6
7 config interface lan
8 option ifname eth0.1
9 option type bridge
10 option proto static
11 option ipaddr 192.168.1.1
12 option netmask 255.255.255.0
13 option ip6assign 64
14
15 config interface wan
16 option ifname eth1
17 option proto dhcp
18
19 config interface wan6
20 option ifname @wan
21 option proto dhcpv6
22
23 config globals globals
24 option ula_prefix auto
25
26 config switch
27 option name rtl8366s
28 option reset 1
29 option enable_vlan 1
30 # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
31 option blinkrate 2
32
33 config switch_vlan
34 option device rtl8366s
35 option vlan 1
36 option ports "0 1 2 3 5t"
37
38 config switch_port
39 # Port 1 controls the GREEN configuration of LEDs for
40 # the switch and the section does not correspond to a real
41 # switch port.
42 #
43 # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
44 # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
45 # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
46 # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
47 # 14: Link (master); 15: separate register
48
49 option device rtl8366s
50 option port 1
51 option led 6
52
53 config switch_port
54 # Port 2 controls the ORANGE configuration of LEDs for
55 # the switch and the section does not correspond to a real
56 # switch port.
57 #
58 # See the key above for switch port 1 for the meaning of the
59 # 'led' setting below.
60
61 option device rtl8366s
62 option port 2
63 option led 9
64
65 config switch_port
66 # Port 5 controls the configuration of the WAN LED and the
67 # section does not correspond to a real switch port.
68 #
69 # To toggle the use of green or orange LEDs for the WAN port,
70 # see the LED setting for wndr3700:green:wan in /etc/config/system.
71 #
72 # See the key above for switch port 1 for the meaning of the
73 # 'led' setting below.
74
75 option device rtl8366s
76 option port 5
77 option led 2