target/linux/ar71xx/base-files/lib/upgrade/dir825.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2012 OpenWrt.org
   4 #
   5
   6 . /lib/functions.sh
   7 . /lib/ar71xx.sh
   8
   9 get_mtd_part_size() {
  10         local part_name=$1
  11         local first dev size erasesize name
  12         while read dev size erasesize name; do
  13                 name=${name#'"'}; name=${name%'"'}
  14                 if [ "$name" = "$part_name" ]; then
  15                         echo $((0x$size))
  16                         break
  17                 fi
  18         done < /proc/mtd
  19 }
  20
  21 get_magic_at() {
  22         local mtddev=$1
  23         local pos=$2
  24         dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
  25 }
  26
  27 dir825b_is_caldata_valid() {
  28         local mtddev=$1
  29         local magic
  30
  31         magic=$(get_magic_at $mtddev 4096)
  32         [ "$magic" != "a55a" ] && return 0
  33
  34         magic=$(get_magic_at $mtddev 20480)
  35         [ "$magic" != "a55a" ] && return 0
  36
  37         return 1
  38 }
  39
  40 dir825b_copy_caldata() {
  41         local cal_src=$1
  42         local cal_dst=$2
  43         local mtd_src
  44         local mtd_dst
  45         local md5_src
  46         local md5_dst
  47
  48         mtd_src=$(find_mtd_part $cal_src)
  49         [ -z "$mtd_src" ] && {
  50                 echo "no $cal_src partition found"
  51                 return 1
  52         }
  53
  54         mtd_dst=$(find_mtd_part $cal_dst)
  55         [ -z "$mtd_dst" ] && {
  56                 echo "no $cal_dst partition found"
  57                 return 1
  58         }
  59
  60         dir825b_is_caldata_valid "$mtd_src" && {
  61                 echo "no valid calibration data found in $cal_src"
  62                 return 1
  63         }
  64
  65         dir825b_is_caldata_valid "$mtd_dst" && {
  66                 echo "Copying calibration data from $cal_src to $cal_dst..."
  67                 dd if="$mtd_src" 2>/dev/null | mtd -q -q write - "$cal_dst"
  68         }
  69
  70         md5_src=$(md5sum "$mtd_src") && md5_src="${md5_src%% *}"
  71         md5_dst=$(md5sum "$mtd_dst") && md5_dst="${md5_dst%% *}"
  72
  73         [ "$md5_src" != "$md5_dst" ] && {
  74                 echo "calibration data mismatch $cal_src:$md5_src $cal_dst:$md5_dst"
  75                 return 1
  76         }
  77
  78         return 0
  79 }
  80
  81 dir825b_do_upgrade_combined() {
  82         local fw_part=$1
  83         local fw_file=$2
  84         local fw_mtd=$(find_mtd_part $fw_part)
  85         local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
  86         local fw_blocks=$(($fw_length / 65536))
  87
  88         if [ -n "$fw_mtd" ] &&  [ ${fw_blocks:-0} -gt 0 ]; then
  89                 local append=""
  90                 [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
  91
  92                 sync
  93                 dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
  94                         mtd $append write - "$fw_part"
  95         fi
  96 }
  97
  98 dir825b_check_image() {
  99         local magic="$(get_magic_long "$1")"
 100         local fw_mtd=$(find_mtd_part "firmware_orig")
 101
 102         case "$magic" in
 103         "27051956")
 104                 ;;
 105         "43493030")
 106                 local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
 107                 local md5_chk=$(dd if="$1" bs=64k skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
 108                 local fw_len=$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
 109                 local fw_part_len=$(get_mtd_part_size "firmware")
 110
 111                 if [ -z "$fw_mtd" ]; then
 112                         ask_bool 0 "Do you have a backup of the caldata partition?" || {
 113                                 echo "Warning, please make sure that you have a backup of the caldata partition."
 114                                 echo "Once you have that, use 'sysupgrade -i' for upgrading to the 'fat' firmware."
 115                                 return 1
 116                         }
 117                 fi
 118
 119                 if [ -z "$md5_img" -o -z "$md5_chk" ]; then
 120                         echo "Unable to get image checksums. Maybe you are using a streamed image?"
 121                         return 1
 122                 fi
 123
 124                 if [ "$md5_img" != "$md5_chk" ]; then
 125                         echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
 126                         return 1
 127                 fi
 128
 129                 fw_len=$((0x$fw_len))
 130                 fw_part_len=${fw_part_len:-0}
 131
 132                 if [ $fw_part_len -lt $fw_len ]; then
 133                         echo "The upgrade image is too big (size:$fw_len available:$fw_part_len)"
 134                         return 1
 135                 fi
 136                 ;;
 137         *)
 138                 echo "Unsupported image format."
 139                 return 1
 140                 ;;
 141         esac
 142
 143         return 0
 144 }
 145
 146 platform_do_upgrade_dir825b() {
 147         local magic="$(get_magic_long "$1")"
 148         local fw_mtd=$(find_mtd_part "firmware_orig")
 149
 150         case "$magic" in
 151         "27051956")
 152                 if [ -n "$fw_mtd" ]; then
 153                         # restore calibration data before downgrading to
 154                         # the normal image
 155                         dir825b_copy_caldata "caldata" "caldata_orig" || {
 156                                 echo "unable to restore calibration data"
 157                                 exit 1
 158                         }
 159                         PART_NAME="firmware_orig"
 160                 else
 161                         PART_NAME="firmware"
 162                 fi
 163                 default_do_upgrade "$ARGV"
 164                 ;;
 165         "43493030")
 166                 if [ -z "$fw_mtd" ]; then
 167                         # backup calibration data before upgrading to the
 168                         # fat image
 169                         dir825b_copy_caldata "caldata" "caldata_copy" || {
 170                                 echo "unable to backup calibration data"
 171                                 exit 1
 172                         }
 173                 fi
 174                 dir825b_do_upgrade_combined "firmware" "$ARGV"
 175                 ;;
 176         esac
 177 }