target/linux/atheros/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
   3      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then
   4         uci batch <<EOF
   5 set network.lan.ifname=eth0.0
   6 set network.wan=interface
   7 set network.wan.ifname=eth0.1
   8 set network.wan.proto=dhcp
   9 commit network
  10 EOF
  11 elif [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -a -x /sbin/swconfig ]; then
  12         uci batch <<EOF
  13 set network.eth0=switch
  14 set network.eth0.reset=1
  15 set network.eth0.enable_vlan=1
  16 set network.eth0_1=switch_vlan
  17 set network.eth0_1.device=eth0
  18 set network.eth0_1.vlan=1
  19 set network.eth0_1.ports="0 1 2 3 5t"
  20 set network.eth0_2=switch_vlan
  21 set network.eth0_2.device=eth0
  22 set network.eth0_2.vlan=2
  23 set network.eth0_2.ports="4 5t"
  24 set network.lan.ifname=eth0.1
  25 set network.wan=interface
  26 set network.wan.ifname=eth0.2
  27 set network.wan.proto=dhcp
  28 commit network
  29 EOF
  30 fi