target/linux/brcm63xx/dts/dsl-274xb-c.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2740B/DSL-2741B rev C2/3";
   9         compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16                 debounce-interval = <60>;
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 2 1>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23         };
  24
  25         gpio-leds {
  26                 compatible = "gpio-leds";
  27
  28                 inet_green {
  29                         label = "dsl-274xb:green:internet";
  30                         gpios = <&gpio0 2 0>;
  31                 };
  32                 power_red {
  33                         label = "dsl-274xb:red:power";
  34                         gpios = <&gpio0 4 1>;
  35                 };
  36                 power_green {
  37                         label = "dsl-274xb:green:power";
  38                         gpios = <&gpio0 5 1>;
  39                         default-state = "on";
  40                 };
  41                 dsl_green {
  42                         label = "dsl-274xb:green:adsl";
  43                         gpios = <&gpio0 9 1>;
  44                 };
  45                 inet_red {
  46                         label = "dsl-274xb:red:internet";
  47                         gpios = <&gpio0 10 0>;
  48                 };
  49         };
  50 };
  51
  52 &pflash {
  53         status = "ok";
  54
  55         linux,part-probe = "bcm63xxpart";
  56
  57         cfe@0 {
  58                 label = "CFE";
  59                 reg = <0x000000 0x010000>;
  60                 read-only;
  61         };
  62
  63         linux@10000 {
  64                 label = "linux";
  65                 reg = <0x010000 0x3e0000>;
  66         };
  67
  68         nvram@3f0000 {
  69                 label = "nvram";
  70                 reg = <0x3f0000 0x010000>;
  71         };
  72 };