target/linux/generic/patches-3.13/771-bgmac-phylib.patch

   1 Use phy lib for the phy. This is needed to get the switch connected to
   2 the phy and driven by b53 working.
   3
   4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
   5
   6 --- a/drivers/net/ethernet/broadcom/bgmac.c
   7 +++ b/drivers/net/ethernet/broadcom/bgmac.c
   8 @@ -1252,27 +1252,14 @@ static int bgmac_set_mac_address(struct
   9  static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
  10  {
  11         struct bgmac *bgmac = netdev_priv(net_dev);
  12 -       struct mii_ioctl_data *data = if_mii(ifr);
  13
  14 -       switch (cmd) {
  15 -       case SIOCGMIIPHY:
  16 -               data->phy_id = bgmac->phyaddr;
  17 -               /* fallthru */
  18 -       case SIOCGMIIREG:
  19 -               if (!netif_running(net_dev))
  20 -                       return -EAGAIN;
  21 -               data->val_out = bgmac_phy_read(bgmac, data->phy_id,
  22 -                                              data->reg_num & 0x1f);
  23 -               return 0;
  24 -       case SIOCSMIIREG:
  25 -               if (!netif_running(net_dev))
  26 -                       return -EAGAIN;
  27 -               bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
  28 -                               data->val_in);
  29 -               return 0;
  30 -       default:
  31 -               return -EOPNOTSUPP;
  32 -       }
  33 +       if (!netif_running(net_dev))
  34 +               return -EINVAL;
  35 +
  36 +       if (!bgmac->phydev)
  37 +               return -EINVAL;
  38 +
  39 +       return phy_mii_ioctl(bgmac->phydev, ifr, cmd);
  40  }
  41
  42  static const struct net_device_ops bgmac_netdev_ops = {
  43 @@ -1294,61 +1281,16 @@ static int bgmac_get_settings(struct net
  44  {
  45         struct bgmac *bgmac = netdev_priv(net_dev);
  46
  47 -       cmd->supported = SUPPORTED_10baseT_Half |
  48 -                        SUPPORTED_10baseT_Full |
  49 -                        SUPPORTED_100baseT_Half |
  50 -                        SUPPORTED_100baseT_Full |
  51 -                        SUPPORTED_1000baseT_Half |
  52 -                        SUPPORTED_1000baseT_Full |
  53 -                        SUPPORTED_Autoneg;
  54 -
  55 -       if (bgmac->autoneg) {
  56 -               WARN_ON(cmd->advertising);
  57 -               if (bgmac->full_duplex) {
  58 -                       if (bgmac->speed & BGMAC_SPEED_10)
  59 -                               cmd->advertising |= ADVERTISED_10baseT_Full;
  60 -                       if (bgmac->speed & BGMAC_SPEED_100)
  61 -                               cmd->advertising |= ADVERTISED_100baseT_Full;
  62 -                       if (bgmac->speed & BGMAC_SPEED_1000)
  63 -                               cmd->advertising |= ADVERTISED_1000baseT_Full;
  64 -               } else {
  65 -                       if (bgmac->speed & BGMAC_SPEED_10)
  66 -                               cmd->advertising |= ADVERTISED_10baseT_Half;
  67 -                       if (bgmac->speed & BGMAC_SPEED_100)
  68 -                               cmd->advertising |= ADVERTISED_100baseT_Half;
  69 -                       if (bgmac->speed & BGMAC_SPEED_1000)
  70 -                               cmd->advertising |= ADVERTISED_1000baseT_Half;
  71 -               }
  72 -       } else {
  73 -               switch (bgmac->speed) {
  74 -               case BGMAC_SPEED_10:
  75 -                       ethtool_cmd_speed_set(cmd, SPEED_10);
  76 -                       break;
  77 -               case BGMAC_SPEED_100:
  78 -                       ethtool_cmd_speed_set(cmd, SPEED_100);
  79 -                       break;
  80 -               case BGMAC_SPEED_1000:
  81 -                       ethtool_cmd_speed_set(cmd, SPEED_1000);
  82 -                       break;
  83 -               }
  84 -       }
  85 -
  86 -       cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
  87 -
  88 -       cmd->autoneg = bgmac->autoneg;
  89 -
  90 -       return 0;
  91 +       return phy_ethtool_gset(bgmac->phydev, cmd);
  92  }
  93
  94 -#if 0
  95  static int bgmac_set_settings(struct net_device *net_dev,
  96                               struct ethtool_cmd *cmd)
  97  {
  98         struct bgmac *bgmac = netdev_priv(net_dev);
  99
 100 -       return -1;
 101 +       return phy_ethtool_sset(bgmac->phydev, cmd);
 102  }
 103 -#endif
 104
 105  static void bgmac_get_drvinfo(struct net_device *net_dev,
 106                               struct ethtool_drvinfo *info)
 107 @@ -1359,6 +1301,7 @@ static void bgmac_get_drvinfo(struct net
 108
 109  static const struct ethtool_ops bgmac_ethtool_ops = {
 110         .get_settings           = bgmac_get_settings,
 111 +       .set_settings           = bgmac_set_settings,
 112         .get_drvinfo            = bgmac_get_drvinfo,
 113  };
 114
 115 @@ -1377,10 +1320,36 @@ static int bgmac_mii_write(struct mii_bu
 116         return bgmac_phy_write(bus->priv, mii_id, regnum, value);
 117  }
 118
 119 +static void bgmac_adjust_link(struct net_device *dev)
 120 +{
 121 +       struct bgmac *bgmac = netdev_priv(dev);
 122 +       struct phy_device *phydev = bgmac->phydev;
 123 +       bool status_changed = 0;
 124 +
 125 +       BUG_ON(!phydev);
 126 +
 127 +       if (bgmac->old_link != phydev->link) {
 128 +               status_changed = 1;
 129 +               bgmac->old_link = phydev->link;
 130 +       }
 131 +
 132 +       /* reflect duplex change */
 133 +       if (phydev->link && (bgmac->old_duplex != phydev->duplex)) {
 134 +               status_changed = 1;
 135 +               bgmac->old_duplex = phydev->duplex;
 136 +       }
 137 +
 138 +       if (status_changed)
 139 +               phy_print_status(phydev);
 140 +}
 141 +
 142  static int bgmac_mii_register(struct bgmac *bgmac)
 143  {
 144         struct mii_bus *mii_bus;
 145         int i, err = 0;
 146 +       struct phy_device *phydev = NULL;
 147 +       char phy_id[MII_BUS_ID_SIZE + 3];
 148 +       struct net_device *net_dev = bgmac->net_dev;
 149
 150         mii_bus = mdiobus_alloc();
 151         if (!mii_bus)
 152 @@ -1411,7 +1380,28 @@ static int bgmac_mii_register(struct bgm
 153
 154         bgmac->mii_bus = mii_bus;
 155
 156 -       return err;
 157 +       /* connect to PHY */
 158 +       snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
 159 +                mii_bus->id, bgmac->phyaddr);
 160 +
 161 +       phydev = phy_connect(net_dev, phy_id, &bgmac_adjust_link,
 162 +                            PHY_INTERFACE_MODE_MII);
 163 +
 164 +       if (IS_ERR(phydev)) {
 165 +               netdev_err(net_dev, "could not attach PHY: %s\n", phy_id);
 166 +               bgmac->phyaddr = BGMAC_PHY_NOREGS;
 167 +               return PTR_ERR(phydev);
 168 +       }
 169 +
 170 +       bgmac->phydev = phydev;
 171 +       bgmac->old_link = 0;
 172 +       bgmac->old_duplex = -1;
 173 +       bgmac->phyaddr = phydev->addr;
 174 +
 175 +       netdev_info(net_dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
 176 +                   phydev->drv->name, dev_name(&phydev->dev));
 177 +
 178 +       return 0;
 179
 180  err_free_irq:
 181         kfree(mii_bus->irq);
 182 --- a/drivers/net/ethernet/broadcom/bgmac.h
 183 +++ b/drivers/net/ethernet/broadcom/bgmac.h
 184 @@ -401,7 +401,10 @@ struct bgmac {
 185         struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
 186         struct net_device *net_dev;
 187         struct napi_struct napi;
 188 +       struct phy_device *phydev;
 189         struct mii_bus *mii_bus;
 190 +       int old_link;
 191 +       int old_duplex;
 192
 193         /* DMA */
 194         struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];