linux/ixp4xx: add kernel 2.6.36 preliminary support
[openwrt/svn-archive/archive.git] / target / linux / ixp4xx / patches-2.6.36 / 185-mi424wr_support.patch
1 --- /dev/null
2 +++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
3 @@ -0,0 +1,71 @@
4 +/*
5 + * arch/arm/mach-ixp4xx/mi424wr-pci.c
6 + *
7 + * Actiontec MI424WR board-level PCI initialization
8 + *
9 + * Copyright (C) 2008 Jose Vasconcellos
10 + *
11 + * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
12 + *
13 + * This program is free software; you can redistribute it and/or modify
14 + * it under the terms of the GNU General Public License version 2 as
15 + * published by the Free Software Foundation.
16 + *
17 + */
18 +
19 +#include <linux/kernel.h>
20 +#include <linux/pci.h>
21 +#include <linux/init.h>
22 +#include <linux/irq.h>
23 +
24 +#include <asm/mach-types.h>
25 +#include <asm/mach/pci.h>
26 +
27 +/* PCI controller GPIO to IRQ pin mappings
28 + * This information was obtained from Actiontec's GPL release.
29 + *
30 + * INTA INTB
31 + * SLOT 13 8 6
32 + * SLOT 14 7 8
33 + * SLOT 15 6 7
34 + */
35 +
36 +void __init mi424wr_pci_preinit(void)
37 +{
38 + set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
39 + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
40 + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
41 +
42 + ixp4xx_pci_preinit();
43 +}
44 +
45 +static int __init mi424wr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
46 +{
47 + if (slot == 13)
48 + return IRQ_IXP4XX_GPIO8;
49 + if (slot == 14)
50 + return IRQ_IXP4XX_GPIO7;
51 + if (slot == 15)
52 + return IRQ_IXP4XX_GPIO6;
53 +
54 + return -1;
55 +}
56 +
57 +struct hw_pci mi424wr_pci __initdata = {
58 + .nr_controllers = 1,
59 + .preinit = mi424wr_pci_preinit,
60 + .swizzle = pci_std_swizzle,
61 + .setup = ixp4xx_setup,
62 + .scan = ixp4xx_scan_bus,
63 + .map_irq = mi424wr_map_irq,
64 +};
65 +
66 +int __init mi424wr_pci_init(void)
67 +{
68 + if (machine_is_mi424wr())
69 + pci_common_init(&mi424wr_pci);
70 + return 0;
71 +}
72 +
73 +subsys_initcall(mi424wr_pci_init);
74 +
75 --- /dev/null
76 +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
77 @@ -0,0 +1,344 @@
78 +/*
79 + * arch/arm/mach-ixp4xx/mi424wr-setup.c
80 + *
81 + * Actiontec MI424-WR board setup
82 + * Copyright (c) 2008 Jose Vasconcellos
83 + *
84 + * Based on Gemtek GTWX5715 by
85 + * Copyright (C) 2004 George T. Joseph
86 + * Derived from Coyote
87 + *
88 + * This program is free software; you can redistribute it and/or
89 + * modify it under the terms of the GNU General Public License
90 + * as published by the Free Software Foundation; either version 2
91 + * of the License, or (at your option) any later version.
92 + *
93 + * This program is distributed in the hope that it will be useful,
94 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
95 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
96 + * GNU General Public License for more details.
97 + *
98 + * You should have received a copy of the GNU General Public License
99 + * along with this program; if not, write to the Free Software
100 + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
101 + *
102 + */
103 +
104 +#include <linux/init.h>
105 +#include <linux/device.h>
106 +#include <linux/serial.h>
107 +#include <linux/serial_8250.h>
108 +#include <linux/types.h>
109 +#include <linux/memory.h>
110 +#include <linux/leds.h>
111 +#include <linux/spi/spi_gpio_old.h>
112 +
113 +#include <asm/setup.h>
114 +#include <asm/irq.h>
115 +#include <asm/io.h>
116 +#include <asm/mach-types.h>
117 +#include <asm/mach/arch.h>
118 +#include <asm/mach/flash.h>
119 +
120 +/*
121 + * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
122 + * and operate as an SPI type interface. The details of the interface
123 + * are available on Kendin/Micrel's web site.
124 + */
125 +
126 +#define MI424WR_KSSPI_SELECT 9
127 +#define MI424WR_KSSPI_TXD 4
128 +#define MI424WR_KSSPI_CLOCK 2
129 +#define MI424WR_KSSPI_RXD 3
130 +
131 +/*
132 + * The "reset" button is wired to GPIO 10.
133 + * The GPIO is brought "low" when the button is pushed.
134 + */
135 +
136 +#define MI424WR_BUTTON_GPIO 10
137 +#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
138 +
139 +#define MI424WR_MOCA_WAN_LED 11
140 +
141 +/* Latch on CS1 - taken from Actiontec's 2.4 source code
142 + *
143 + * default latch value
144 + * 0 - power alarm led (red) 0 (off)
145 + * 1 - power led (green) 0 (off)
146 + * 2 - wireless led (green) 1 (off)
147 + * 3 - no internet led (red) 0 (off)
148 + * 4 - internet ok led (green) 0 (off)
149 + * 5 - moca LAN 0 (off)
150 + * 6 - WAN alarm led (red) 0 (off)
151 + * 7 - PCI reset 1 (not reset)
152 + * 8 - IP phone 1 led (green) 1 (off)
153 + * 9 - IP phone 2 led (green) 1 (off)
154 + * 10 - VOIP ready led (green) 1 (off)
155 + * 11 - PSTN relay 1 control 0 (PSTN)
156 + * 12 - PSTN relay 1 control 0 (PSTN)
157 + * 13 - N/A
158 + * 14 - N/A
159 + * 15 - N/A
160 + */
161 +
162 +#define MI424WR_LATCH_MASK 0x04
163 +#define MI424WR_LATCH_DEFAULT 0x1f86
164 +
165 +#define MI424WR_LATCH_ALARM_LED 0x00
166 +#define MI424WR_LATCH_POWER_LED 0x01
167 +#define MI424WR_LATCH_WIRELESS_LED 0x02
168 +#define MI424WR_LATCH_INET_DOWN_LED 0x03
169 +#define MI424WR_LATCH_INET_OK_LED 0x04
170 +#define MI424WR_LATCH_MOCA_LAN_LED 0x05
171 +#define MI424WR_LATCH_WAN_ALARM_LED 0x06
172 +#define MI424WR_LATCH_PCI_RESET 0x07
173 +#define MI424WR_LATCH_PHONE1_LED 0x08
174 +#define MI424WR_LATCH_PHONE2_LED 0x09
175 +#define MI424WR_LATCH_VOIP_LED 0x10
176 +#define MI424WR_LATCH_PSTN_RELAY1 0x11
177 +#define MI424WR_LATCH_PSTN_RELAY2 0x12
178 +
179 +/* initialize CS1 to default timings, Intel style, 16-bit bus */
180 +#define MI424WR_CS1_CONFIG 0x80000002
181 +
182 +/* Define both UARTs but they are not easily accessible.
183 + */
184 +
185 +static struct resource mi424wr_uart_resources[] = {
186 + {
187 + .start = IXP4XX_UART1_BASE_PHYS,
188 + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
189 + .flags = IORESOURCE_MEM,
190 + },
191 + {
192 + .start = IXP4XX_UART2_BASE_PHYS,
193 + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
194 + .flags = IORESOURCE_MEM,
195 + }
196 +};
197 +
198 +
199 +static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
200 + {
201 + .mapbase = IXP4XX_UART1_BASE_PHYS,
202 + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
203 + .irq = IRQ_IXP4XX_UART1,
204 + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
205 + .iotype = UPIO_MEM,
206 + .regshift = 2,
207 + .uartclk = IXP4XX_UART_XTAL,
208 + },
209 + {
210 + .mapbase = IXP4XX_UART2_BASE_PHYS,
211 + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
212 + .irq = IRQ_IXP4XX_UART2,
213 + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
214 + .iotype = UPIO_MEM,
215 + .regshift = 2,
216 + .uartclk = IXP4XX_UART_XTAL,
217 + },
218 + { },
219 +};
220 +
221 +static struct platform_device mi424wr_uart_device = {
222 + .name = "serial8250",
223 + .id = PLAT8250_DEV_PLATFORM,
224 + .dev.platform_data = mi424wr_uart_platform_data,
225 + .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
226 + .resource = mi424wr_uart_resources,
227 +};
228 +
229 +static struct flash_platform_data mi424wr_flash_data = {
230 + .map_name = "cfi_probe",
231 + .width = 2,
232 +};
233 +
234 +static struct resource mi424wr_flash_resource = {
235 + .flags = IORESOURCE_MEM,
236 +};
237 +
238 +static struct platform_device mi424wr_flash = {
239 + .name = "IXP4XX-Flash",
240 + .id = 0,
241 + .dev.platform_data = &mi424wr_flash_data,
242 + .num_resources = 1,
243 + .resource = &mi424wr_flash_resource,
244 +};
245 +
246 +static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
247 + struct spi_master *master, void *data)
248 +{
249 +
250 + strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
251 +
252 + bi->max_speed_hz = 5000000 /* Hz */;
253 + bi->bus_num = master->bus_num;
254 + bi->mode = SPI_MODE_0;
255 +
256 + return 0;
257 +}
258 +
259 +static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
260 + .pin_cs = MI424WR_KSSPI_SELECT,
261 + .pin_clk = MI424WR_KSSPI_CLOCK,
262 + .pin_miso = MI424WR_KSSPI_RXD,
263 + .pin_mosi = MI424WR_KSSPI_TXD,
264 + .cs_activelow = 1,
265 + .no_spi_delay = 1,
266 + .boardinfo_setup = mi424wr_spi_boardinfo_setup,
267 +};
268 +
269 +static struct gpio_led mi424wr_gpio_led[] = {
270 + {
271 + .name = "moca-wan", /* green led */
272 + .gpio = MI424WR_MOCA_WAN_LED,
273 + .active_low = 0,
274 + }
275 +};
276 +
277 +static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
278 + .num_leds = 1,
279 + .leds = mi424wr_gpio_led,
280 +};
281 +
282 +static struct platform_device mi424wr_gpio_leds = {
283 + .name = "leds-gpio",
284 + .id = -1,
285 + .dev.platform_data = &mi424wr_gpio_leds_data,
286 +};
287 +
288 +static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
289 +static uint16_t __iomem *iobase;
290 +
291 +static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
292 +{
293 +
294 + if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
295 + latch_value &= ~(0x1 << bit);
296 + else
297 + latch_value |= (0x1 << bit);
298 +
299 + __raw_writew(latch_value, iobase);
300 +
301 +}
302 +
303 +static struct latch_led mi424wr_latch_led[] = {
304 + {
305 + .name = "power-alarm",
306 + .bit = MI424WR_LATCH_ALARM_LED,
307 + },
308 + {
309 + .name = "power-ok",
310 + .bit = MI424WR_LATCH_POWER_LED,
311 + },
312 + {
313 + .name = "wireless", /* green led */
314 + .bit = MI424WR_LATCH_WIRELESS_LED,
315 + },
316 + {
317 + .name = "inet-down", /* red led */
318 + .bit = MI424WR_LATCH_INET_DOWN_LED,
319 + },
320 + {
321 + .name = "inet-up", /* green led */
322 + .bit = MI424WR_LATCH_INET_OK_LED,
323 + },
324 + {
325 + .name = "moca-lan", /* green led */
326 + .bit = MI424WR_LATCH_MOCA_LAN_LED,
327 + },
328 + {
329 + .name = "wan-alarm", /* red led */
330 + .bit = MI424WR_LATCH_WAN_ALARM_LED,
331 + }
332 +};
333 +
334 +static struct latch_led_platform_data mi424wr_latch_leds_data = {
335 + .num_leds = ARRAY_SIZE(mi424wr_latch_led),
336 + .mem = 0x51000000,
337 + .leds = mi424wr_latch_led,
338 + .set_led = mi424wr_latch_set_led,
339 +};
340 +
341 +static struct platform_device mi424wr_latch_leds = {
342 + .name = "leds-latch",
343 + .id = -1,
344 + .dev.platform_data = &mi424wr_latch_leds_data,
345 +};
346 +
347 +static struct platform_device mi424wr_spi_bus = {
348 + .name = "spi-gpio",
349 + .id = 0,
350 + .dev.platform_data = &mi424wr_spi_bus_data,
351 +};
352 +
353 +static struct eth_plat_info mi424wr_npeb_data = {
354 + .phy = 17, /* KS8721 */
355 + .rxq = 3,
356 + .txreadyq = 20,
357 +};
358 +
359 +static struct eth_plat_info mi424wr_npec_data = {
360 + .phy = IXP4XX_ETH_PHY_MAX_ADDR,
361 + .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
362 + .rxq = 4,
363 + .txreadyq = 21,
364 +};
365 +
366 +static struct platform_device mi424wr_npe_devices[] = {
367 + {
368 + .name = "ixp4xx_eth",
369 + .id = IXP4XX_ETH_NPEC,
370 + .dev.platform_data = &mi424wr_npec_data,
371 + }, {
372 + .name = "ixp4xx_eth",
373 + .id = IXP4XX_ETH_NPEB,
374 + .dev.platform_data = &mi424wr_npeb_data,
375 + }
376 +};
377 +
378 +static struct platform_device *mi424wr_devices[] __initdata = {
379 + &mi424wr_uart_device,
380 + &mi424wr_flash,
381 + &mi424wr_gpio_leds,
382 + &mi424wr_latch_leds,
383 + &mi424wr_spi_bus,
384 + &mi424wr_npe_devices[0],
385 + &mi424wr_npe_devices[1],
386 +};
387 +
388 +static void __init mi424wr_init(void)
389 +{
390 + ixp4xx_sys_init();
391 +
392 + mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
393 + mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
394 +
395 + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
396 + *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
397 +
398 + /* configure button as input
399 + */
400 + gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
401 +
402 + /* Initialize LEDs and enables PCI bus.
403 + */
404 + iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
405 + __raw_writew(latch_value, iobase);
406 +
407 + platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
408 +}
409 +
410 +
411 +MACHINE_START(MI424WR, "Actiontec MI424WR")
412 + /* Maintainer: Jose Vasconcellos */
413 + .phys_io = IXP4XX_UART2_BASE_PHYS,
414 + .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
415 + .map_io = ixp4xx_map_io,
416 + .init_irq = ixp4xx_init_irq,
417 + .timer = &ixp4xx_timer,
418 + .boot_params = 0x0100,
419 + .init_machine = mi424wr_init,
420 +MACHINE_END
421 +
422 --- a/arch/arm/mach-ixp4xx/Makefile
423 +++ b/arch/arm/mach-ixp4xx/Makefile
424 @@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
425 obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
426 obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
427 obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
428 +obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
429
430 obj-y += common.o
431
432 @@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
433 obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
434 obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
435 obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
436 +obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
437
438 obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
439 obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
440 --- a/arch/arm/mach-ixp4xx/Kconfig
441 +++ b/arch/arm/mach-ixp4xx/Kconfig
442 @@ -235,6 +235,13 @@ config MACH_GTWX5715
443 "High Speed" UART is n/c (as far as I can tell)
444 20 Pin ARM/Xscale JTAG interface on J2
445
446 +config MACH_MI424WR
447 + bool "Actiontec MI424WR"
448 + depends on ARCH_IXP4XX
449 + select PCI
450 + help
451 + Add support for the Actiontec MI424-WR.
452 +
453 comment "IXP4xx Options"
454
455 config IXP4XX_INDIRECT_PCI
456 --- a/arch/arm/configs/ixp4xx_defconfig
457 +++ b/arch/arm/configs/ixp4xx_defconfig
458 @@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
459 CONFIG_MACH_DSMG600=y
460 CONFIG_MACH_FSG=y
461 CONFIG_MACH_GTWX5715=y
462 +CONFIG_MACH_MI424WR=y
463 CONFIG_IXP4XX_QMGR=y
464 CONFIG_IXP4XX_NPE=y
465 # CONFIG_ARM_THUMB is not set