target/linux/lantiq/dts/EASY80920.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         boot = &power;
   9                         failsafe = &power;
  10                         running = &power;
  11
  12                         usb = &usb1;
  13                         usb2 = &usb2;
  14                 };
  15         };
  16
  17         memory@0 {
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         fpi@10000000 {
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24                 compatible = "lantiq,fpi", "simple-bus";
  25                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  26                 reg = <0x10000000 0xEF00000>;
  27
  28                 localbus@0 {
  29                         #address-cells = <2>;
  30                         #size-cells = <1>;
  31                         compatible = "lantiq,localbus", "simple-bus";
  32
  33                 };
  34
  35                 gpio: pinmux@E100B10 {
  36                         compatible = "lantiq,pinctrl-xr9";
  37                         pinctrl-names = "default";
  38                         pinctrl-0 = <&state_default>;
  39
  40                         interrupt-parent = <&icu0>;
  41                         interrupts = <166 135 66 40 41 42 38>;
  42
  43                         #gpio-cells = <2>;
  44                         gpio-controller;
  45                         reg = <0xE100B10 0xA0>;
  46
  47                         state_default: pinmux {
  48                                 exin3 {
  49                                         lantiq,groups = "exin3";
  50                                         lantiq,function = "exin";
  51                                 };
  52                                 stp {
  53                                         lantiq,groups = "stp";
  54                                         lantiq,function = "stp";
  55                                 };
  56                                 nand {
  57                                         lantiq,groups = "nand cle", "nand ale",
  58                                                         "nand rd", "nand rdy";
  59                                         lantiq,function = "ebu";
  60                                 };
  61                                 mdio {
  62                                         lantiq,groups = "mdio";
  63                                         lantiq,function = "mdio";
  64                                 };
  65                                 pci {
  66                                         lantiq,groups = "gnt1", "req1";
  67                                         lantiq,function = "pci";
  68                                 };
  69                                 conf_out {
  70                                         lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
  71                                                         "io4", "io5", "io6", /* stp */
  72                                                         "io21",
  73                                                         "io33";
  74                                         lantiq,open-drain;
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 pcie-rst {
  79                                         lantiq,pins = "io38";
  80                                         lantiq,pull = <0>;
  81                                         lantiq,output = <1>;
  82                                 };
  83                                 conf_in {
  84                                         lantiq,pins = "io39", /* exin3 */
  85                                                         "io48"; /* nand rdy */
  86                                         lantiq,pull = <2>;
  87                                 };
  88                         };
  89                         pins_spi_default: pins_spi_default {
  90                                 spi_in {
  91                                         lantiq,groups = "spi_di";
  92                                         lantiq,function = "spi";
  93                                 };
  94                                 spi_out {
  95                                         lantiq,groups = "spi_do", "spi_clk",
  96                                                 "spi_cs4";
  97                                         lantiq,function = "spi";
  98                                         lantiq,output = <1>;
  99                                 };
 100                         };
 101                 };
 102
 103                 eth@E108000 {
 104                         #address-cells = <1>;
 105                         #size-cells = <0>;
 106                         compatible = "lantiq,xrx200-net";
 107                         reg = < 0xE108000 0x3000 /* switch */
 108                                 0xE10B100 0x70 /* mdio */
 109                                 0xE10B1D8 0x30 /* mii */
 110                                 0xE10B308 0x30 /* pmac */
 111                         >;
 112                         interrupt-parent = <&icu0>;
 113                         interrupts = <73 72>;
 114
 115                         lan: interface@0 {
 116                                 compatible = "lantiq,xrx200-pdi";
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 reg = <0>;
 120                                 mac-address = [ 00 11 22 33 44 55 ];
 121
 122                                 ethernet@0 {
 123                                         compatible = "lantiq,xrx200-pdi-port";
 124                                         reg = <0>;
 125                                         phy-mode = "rgmii";
 126                                         phy-handle = <&phy0>;
 127                                 };
 128                                 ethernet@1 {
 129                                         compatible = "lantiq,xrx200-pdi-port";
 130                                         reg = <1>;
 131                                         phy-mode = "rgmii";
 132                                         phy-handle = <&phy1>;
 133                                 };
 134                                 ethernet@2 {
 135                                         compatible = "lantiq,xrx200-pdi-port";
 136                                         reg = <2>;
 137                                         phy-mode = "gmii";
 138                                         phy-handle = <&phy11>;
 139                                 };
 140                         };
 141
 142                         wan: interface@1 {
 143                                 compatible = "lantiq,xrx200-pdi";
 144                                 #address-cells = <1>;
 145                                 #size-cells = <0>;
 146                                 reg = <1>;
 147                                 mac-address = [ 00 11 22 33 44 56 ];
 148                                 lantiq,wan;
 149                                 ethernet@5 {
 150                                         compatible = "lantiq,xrx200-pdi-port";
 151                                         reg = <5>;
 152                                         phy-mode = "rgmii";
 153                                         phy-handle = <&phy5>;
 154                                 };
 155                         };
 156
 157                         test: interface@2 {
 158                                 compatible = "lantiq,xrx200-pdi";
 159                                 #address-cells = <1>;
 160                                 #size-cells = <0>;
 161                                 reg = <2>;
 162                                 mac-address = [ 00 11 22 33 44 57 ];
 163                                 ethernet@4 {
 164                                         compatible = "lantiq,xrx200-pdi-port";
 165                                         reg = <4>;
 166                                         phynmode0 = "gmii";
 167                                         phy-handle = <&phy13>;
 168                                 };
 169                         };
 170
 171                         mdio@0 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "lantiq,xrx200-mdio";
 175                                 phy0: ethernet-phy@0 {
 176                                         reg = <0x0>;
 177                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 178                                 };
 179                                 phy1: ethernet-phy@1 {
 180                                         reg = <0x1>;
 181                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 182                                 };
 183                                 phy5: ethernet-phy@5 {
 184                                         reg = <0x5>;
 185                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 186                                 };
 187                                 phy11: ethernet-phy@11 {
 188                                         reg = <0x11>;
 189                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 190                                 };
 191                                 phy13: ethernet-phy@13 {
 192                                         reg = <0x13>;
 193                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 194                                 };
 195                         };
 196                 };
 197
 198                 stp: stp@E100BB0 {
 199                         compatible = "lantiq,gpio-stp-xway";
 200                         reg = <0xE100BB0 0x40>;
 201                         #gpio-cells = <2>;
 202                         gpio-controller;
 203
 204                         lantiq,shadow = <0xffff>;
 205                         lantiq,groups = <0x7>;
 206                         lantiq,dsl = <0x3>;
 207                         lantiq,phy1 = <0x7>;
 208                         lantiq,phy2 = <0x7>;
 209                         /* lantiq,rising; */
 210                 };
 211
 212                 ifxhcd@E101000 {
 213                         status = "okay";
 214                         gpios = <&gpio 33 0>;
 215                         lantiq,portmask = <0x3>;
 216                 };
 217
 218                 pci@E105400 {
 219                         #address-cells = <3>;
 220                         #size-cells = <2>;
 221                         #interrupt-cells = <1>;
 222                         compatible = "lantiq,pci-xway1";
 223                         bus-range = <0x0 0x0>;
 224                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 225                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 226                         reg = <0x7000000 0x8000         /* config space */
 227                                 0xE105400 0x400>;       /* pci bridge */
 228                         lantiq,bus-clock = <33333333>;
 229                         /*lantiq,external-clock;*/
 230                         lantiq,delay-hi = <0>; /* 0ns delay */
 231                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 232                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 233                         interrupt-map = <
 234                                 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
 235                                 >;
 236                         gpios-reset = <&gpio 21 0>;
 237                         req-mask = <0x1>;       /* GNT1 */
 238                 };
 239         };
 240
 241         gphy-xrx200 {
 242                 compatible = "lantiq,phy-xrx200";
 243                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 244                 phys = [ 00 01 ];
 245         };
 246
 247         gpio-keys-polled {
 248                 compatible = "gpio-keys-polled";
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251                 poll-interval = <100>;
 252 /*              reset {
 253                         label = "reset";
 254                         gpios = <&gpio 7 1>;
 255                         linux,code = <0x198>;
 256                 };*/
 257                 paging {
 258                         label = "paging";
 259                         gpios = <&gpio 11 1>;
 260                         linux,code = <0x100>;
 261                 };
 262         };
 263
 264         gpio-leds {
 265                 compatible = "gpio-leds";
 266
 267                 power: power {
 268                         label = "easy80920:green:power";
 269                         gpios = <&stp 9 0>;
 270                         default-state = "keep";
 271                 };
 272                 warning {
 273                         label = "easy80920:green:warning";
 274                         gpios = <&stp 22 0>;
 275                 };
 276                 fxs1 {
 277                         label = "easy80920:green:fxs1";
 278                         gpios = <&stp 21 0>;
 279                 };
 280                 fxs2 {
 281                         label = "easy80920:green:fxs2";
 282                         gpios = <&stp 20 0>;
 283                 };
 284                 fxo {
 285                         label = "easy80920:green:fxo";
 286                         gpios = <&stp 19 0>;
 287                 };
 288                 usb1: usb1 {
 289                         label = "easy80920:green:usb1";
 290                         gpios = <&stp 18 0>;
 291                 };
 292                 usb2: usb2 {
 293                         label = "easy80920:green:usb2";
 294                         gpios = <&stp 15 0>;
 295                 };
 296                 sd {
 297                         label = "easy80920:green:sd";
 298                         gpios = <&stp 14 0>;
 299                 };
 300                 wps {
 301                         label = "easy80920:green:wps";
 302                         gpios = <&stp 12 0>;
 303                 };
 304         };
 305 };
 306
 307 &spi {
 308         pinctrl-names = "default";
 309         pinctrl-0 = <&pins_spi_default>;
 310
 311         status = "ok";
 312
 313         m25p80@4 {
 314                 #address-cells = <1>;
 315                 #size-cells = <1>;
 316                 compatible = "jedec,spi-nor";
 317                 reg = <4 0>;
 318                 spi-max-frequency = <1000000>;
 319
 320                 partition@0 {
 321                         reg = <0x0 0x20000>;
 322                         label = "SPI (RO) U-Boot Image";
 323                         read-only;
 324                 };
 325
 326                 partition@20000 {
 327                         reg = <0x20000 0x10000>;
 328                         label = "ENV_MAC";
 329                         read-only;
 330                 };
 331
 332                 partition@30000 {
 333                         reg = <0x30000 0x10000>;
 334                         label = "DPF";
 335                         read-only;
 336                 };
 337
 338                 partition@40000 {
 339                         reg = <0x40000 0x10000>;
 340                         label = "NVRAM";
 341                         read-only;
 342                 };
 343
 344                 partition@500000 {
 345                         reg = <0x50000 0x003a0000>;
 346                         label = "kernel";
 347                 };
 348         };
 349 };