target/linux/lantiq/dts/P2812HNUFX.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x8000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15                 compatible = "lantiq,fpi", "simple-bus";
  16                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  17                 reg = <0x10000000 0xEF00000>;
  18
  19                 localbus@0 {
  20                         #address-cells = <2>;
  21                         #size-cells = <1>;
  22                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  23                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  24                         compatible = "lantiq,localbus", "simple-bus";
  25                 };
  26
  27                 gpio: pinmux@E100B10 {
  28                         compatible = "lantiq,pinctrl-xr9";
  29                         pinctrl-names = "default";
  30                         pinctrl-0 = <&state_default>;
  31
  32                         interrupt-parent = <&icu0>;
  33                         interrupts = <166 135 66 40 41 42 38>;
  34
  35                         #gpio-cells = <2>;
  36                         gpio-controller;
  37                         reg = <0xE100B10 0xA0>;
  38
  39                         state_default: pinmux {
  40                                 exin3 {
  41                                         lantiq,groups = "exin3";
  42                                         lantiq,function = "exin";
  43                                 };
  44                                 mdio {
  45                                         lantiq,groups = "mdio";
  46                                         lantiq,function = "mdio";
  47                                 };
  48                                 gphy-leds {
  49                                         lantiq,groups = "gphy0 led1", "gphy1 led1",
  50                                                         "gphy0 led2", "gphy1 led2";
  51                                         lantiq,function = "gphy";
  52                                         lantiq,pull = <2>;
  53                                         lantiq,open-drain = <0>;
  54                                         lantiq,output = <1>;
  55                                 };
  56                                 stp {
  57                                         lantiq,groups = "stp";
  58                                         lantiq,function = "stp";
  59                                         lantiq,pull = <2>;
  60                                         lantiq,open-drain = <0>;
  61                                         lantiq,output = <1>;
  62                                 };
  63                                 pci-in {
  64                                         lantiq,groups = "req1";
  65                                         lantiq,function = "pci";
  66                                         lantiq,output = <0>;
  67                                         lantiq,open-drain = <1>;
  68                                         lantiq,pull = <2>;
  69                                 };
  70                                 pci-out {
  71                                         lantiq,groups = "gnt1";
  72                                         lantiq,function = "pci";
  73                                         lantiq,output = <1>;
  74                                         lantiq,open-drain = <0>;
  75                                         lantiq,pull = <0>;
  76                                 };
  77                                 pci_rst {
  78                                         lantiq,pins = "io21";
  79                                         lantiq,output = <1>;
  80                                         lantiq,open-drain = <0>;
  81                                         lantiq,pull = <2>;
  82                                 };
  83                                 pcie-rst {
  84                                         lantiq,pins = "io38";
  85                                         lantiq,pull = <0>;
  86                                         lantiq,output = <1>;
  87                                 };
  88                                 ifxhcd-rst {
  89                                         lantiq,pins = "io33";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,open-drain = <0>;
  92                                         lantiq,output = <1>;
  93                                 };
  94                                 nand_out {
  95                                         lantiq,groups = "nand cle", "nand ale";
  96                                         lantiq,function = "ebu";
  97                                         lantiq,output = <1>;
  98                                         lantiq,open-drain = <0>;
  99                                         lantiq,pull = <0>;
 100                                 };
 101                                 nand_cs1 {
 102                                         lantiq,groups = "nand cs1";
 103                                         lantiq,function = "ebu";
 104                                         lantiq,open-drain = <0>;
 105                                         lantiq,pull = <0>;
 106                                 };
 107                         };
 108                 };
 109
 110                 eth@E108000 {
 111                         #address-cells = <1>;
 112                         #size-cells = <0>;
 113                         compatible = "lantiq,xrx200-net";
 114                         reg = < 0xE108000 0x3000        /* switch */
 115                                 0xE10B100 0x70          /* mdio */
 116                                 0xE10B1D8 0x30          /* mii */
 117                                 0xE10B308 0x30 >;       /* pmac */
 118                         interrupt-parent = <&icu0>;
 119                         interrupts = <73 72>;
 120
 121                         lan: interface@0 {
 122                                 compatible = "lantiq,xrx200-pdi";
 123                                 #address-cells = <1>;
 124                                 #size-cells = <0>;
 125                                 reg = <0>;
 126                                 mac-address = [ 00 11 22 33 44 55 ];
 127                                 lantiq,switch;
 128
 129                                 ethernet@0 {
 130                                         compatible = "lantiq,xrx200-pdi-port";
 131                                         reg = <0>;
 132                                         phy-mode = "rgmii";
 133                                         phy-handle = <&phy0>;
 134                                 };
 135                                 ethernet@1 {
 136                                         compatible = "lantiq,xrx200-pdi-port";
 137                                         reg = <1>;
 138                                         phy-mode = "rgmii";
 139                                         phy-handle = <&phy1>;
 140                                 };
 141                                 ethernet@2 {
 142                                         compatible = "lantiq,xrx200-pdi-port";
 143                                         reg = <2>;
 144                                         phy-mode = "gmii";
 145                                         phy-handle = <&phy11>;
 146                                 };
 147                                 ethernet@4 {
 148                                         compatible = "lantiq,xrx200-pdi-port";
 149                                         reg = <4>;
 150                                         phy-mode = "gmii";
 151                                         phy-handle = <&phy13>;
 152                                 };
 153                                 ethernet@5 {
 154                                         compatible = "lantiq,xrx200-pdi-port";
 155                                         reg = <5>;
 156                                         phy-mode = "rgmii";
 157                                         phy-handle = <&phy5>;
 158                                 };
 159                         };
 160
 161                         mdio@0 {
 162                                 #address-cells = <1>;
 163                                 #size-cells = <0>;
 164                                 compatible = "lantiq,xrx200-mdio";
 165
 166                                 phy0: ethernet-phy@0 {
 167                                         reg = <0x0>;
 168                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 169                                 };
 170                                 phy1: ethernet-phy@1 {
 171                                         reg = <0x1>;
 172                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 173                                 };
 174                                 phy5: ethernet-phy@5 {
 175                                         reg = <0x5>;
 176                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 177                                 };
 178                                 phy11: ethernet-phy@11 {
 179                                         reg = <0x11>;
 180                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 181                                 };
 182                                 phy13: ethernet-phy@13 {
 183                                         reg = <0x13>;
 184                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 185                                 };
 186                         };
 187                 };
 188
 189                 stp: stp@E100BB0 {
 190                         compatible = "lantiq,gpio-stp-xway";
 191                         reg = <0xE100BB0 0x40>;
 192                         #gpio-cells = <2>;
 193                         gpio-controller;
 194
 195                         lantiq,shadow = <0xffffff>;
 196                         lantiq,groups = <0x7>;
 197                         lantiq,dsl = <0x0>;
 198                         lantiq,phy1 = <0x0>;
 199                         lantiq,phy2 = <0x0>;
 200                 };
 201
 202                 ifxhcd@E101000 {
 203                         status = "okay";
 204                         gpios = <&gpio 33 0>;
 205                         lantiq,portmask = <0x3>;
 206                 };
 207
 208                 ifxhcd@E106000 {
 209                         status = "okay";
 210                         gpios = <&gpio 33 0>;
 211                 };
 212
 213                 pci@E105400 {
 214                         status = "okay";
 215                         #address-cells = <3>;
 216                         #size-cells = <2>;
 217                         #interrupt-cells = <1>;
 218                         compatible = "lantiq,pci-xway";
 219                         bus-range = <0x0 0x0>;
 220                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 221                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 222                         reg = <0x7000000 0x8000         /* config space */
 223                                 0xE105400 0x400>;       /* pci bridge */
 224                         lantiq,bus-clock = <33333333>;
 225                         /*lantiq,external-clock;*/
 226                         lantiq,delay-hi = <0>; /* 0ns delay */
 227                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 228                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 229                         interrupt-map = <
 230                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 231                                 >;
 232                         gpio-reset = <&gpio 21 0>;
 233                         req-mask = <0x1>;       /* GNT1 */
 234                 };
 235         };
 236
 237         gphy-xrx200 {
 238                 compatible = "lantiq,phy-xrx200";
 239                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 240                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 241                 phys = [ 00 01 ];
 242         };
 243
 244         gpio-keys-polled {
 245                 compatible = "gpio-keys-polled";
 246                 #address-cells = <1>;
 247                 #size-cells = <0>;
 248                 poll-interval = <100>;
 249
 250                 reset {
 251                         label = "reset";
 252                         gpios = <&gpio 39 1>;
 253                         linux,code = <0x198>;
 254                 };
 255
 256                 rfkill {
 257                         label = "rfkill";
 258                         gpios = <&gpio 1 1>;
 259                         linux,code = <0xf7>;
 260                 };
 261         };
 262 };