target/linux/lantiq/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "VG3503J - BT OpenReach VDSL Modem";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x2000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         ranges = <0 0 0x0 0x3ffffff>;
  19                         nor-boot@0 {
  20                                 compatible = "lantiq,nor";
  21                                 bank-width = <2>;
  22                                 reg = <0 0x0 0x2000000>;
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25
  26                                 partition@0 {
  27                                         label = "uboot";
  28                                         reg = <0x00000 0x20000>;
  29                                 };
  30
  31                                 partition@20000 {
  32                                         label = "kernel";
  33                                         reg = <0x20000 0x180000>;
  34                                 };
  35
  36                                 partition@1a0000 {
  37                                         label = "rootfs";
  38                                         reg = <0x1a0000 0x5a0000>;
  39                                 };
  40
  41                                 partition@740000 {
  42                                         label = "btagent";
  43                                         reg = <0x740000 0x80000>;
  44                                 };
  45
  46                                 partition@7c0000 {
  47                                         label = "pri_bfocus_cfg";
  48                                         reg = <0x7c0000 0x10000>;
  49                                 };
  50
  51                                 partition@7d0000 {
  52                                         label = "sec_bfocus_cfg";
  53                                         reg = <0x7d0000 0x10000>;
  54                                 };
  55
  56                                 partition@7e0000 {
  57                                         label = "sysconfig";
  58                                         reg = <0x7e0000 0x10000>;
  59                                 };
  60
  61                                 partition@7f0000 {
  62                                         label = "misc_cfg";
  63                                         reg = <0x7f0000 0x10000>;
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 mdio {
  74                                         lantiq,groups = "mdio";
  75                                         lantiq,function = "mdio";
  76                                 };
  77                                 gphy-leds {
  78                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  79                                                         "gphy0 led2", "gphy1 led0",
  80                                                         "gphy1 led1", "gphy1 led2";
  81                                         lantiq,function = "gphy";
  82                                         lantiq,pull = <2>;
  83                                         lantiq,open-drain = <0>;
  84                                         lantiq,output = <1>;
  85                                 };
  86                         };
  87                 };
  88
  89                 eth@E108000 {
  90                         #address-cells = <1>;
  91                         #size-cells = <0>;
  92                         compatible = "lantiq,xrx200-net";
  93                         reg = < 0xE108000 0x3000 /* switch */
  94                                 0xE10B100 0x70 /* mdio */
  95                                 0xE10B1D8 0x30 /* mii */
  96                                 0xE10B308 0x30 /* pmac */
  97                         >;
  98                         interrupt-parent = <&icu0>;
  99                         interrupts = <73 72>;
 100
 101                         interface@0 {
 102                                 compatible = "lantiq,xrx200-pdi";
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 reg = <0>;
 106                                 mac-address = [ 00 11 22 33 44 55 ];
 107                                 ethernet@2 {
 108                                         compatible = "lantiq,xrx200-pdi-port";
 109                                         reg = <2>;
 110                                         phy-mode = "mii";
 111                                         phy-handle = <&phy11>;
 112                                 };
 113                                 ethernet@4 {
 114                                         compatible = "lantiq,xrx200-pdi-port";
 115                                         reg = <4>;
 116                                         phy-mode = "mii";
 117                                         phy-handle = <&phy13>;
 118                                 };
 119                         };
 120
 121                         mdio@0 {
 122                                 #address-cells = <1>;
 123                                 #size-cells = <0>;
 124                                 compatible = "lantiq,xrx200-mdio";
 125                                 phy11: ethernet-phy@11 {
 126                                         reg = <0x11>;
 127                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 128                                 };
 129                                 phy13: ethernet-phy@13 {
 130                                         reg = <0x13>;
 131                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 132                                 };
 133                         };
 134                 };
 135         };
 136
 137         gphy-xrx200 {
 138                 compatible = "lantiq,phy-xrx200";
 139                 firmware = "lantiq/vr9_phy22f_a1x.bin";
 140                 phys = [ 00 01 ];
 141         };
 142
 143         gpio-keys-polled {
 144                 compatible = "gpio-keys-polled";
 145                 #address-cells = <1>;
 146                 #size-cells = <0>;
 147                 poll-interval = <100>;
 148                 reset {
 149                         label = "reset";
 150                         gpios = <&gpio 6 1>;
 151                         linux,code = <0x198>;
 152                 };
 153         };
 154
 155         gpio-leds {
 156                 compatible = "gpio-leds";
 157
 158                 power2 {
 159                         label = "power2";
 160                         gpios = <&gpio 14 1>;
 161                 };
 162                 dsl {
 163                         label = "bt:green:dsl";
 164                         gpios = <&gpio 19 1>;
 165                 };
 166                 power {
 167                         label = "power";
 168                         gpios = <&gpio 28 1>;
 169                 };
 170         };
 171 };