target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch

   1 From c21eed4418956ecc95966a2e174d47f58397071a Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Wed, 30 Jan 2013 21:12:47 +0100
   4 Subject: [PATCH 19/36] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
   5
   6 The driver uses plat_nand. As the platform_device is loaded from DT, we need
   7 to lookup the node and attach our falcon specific "struct platform_nand_data"
   8 to it.
   9
  10 Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
  11 Signed-off-by: John Crispin <blogic@openwrt.org>
  12 ---
  13  drivers/mtd/nand/Kconfig       |    8 ++++
  14  drivers/mtd/nand/Makefile      |    1 +
  15  drivers/mtd/nand/falcon_nand.c |   83 ++++++++++++++++++++++++++++++++++++++++
  16  3 files changed, 92 insertions(+)
  17  create mode 100644 drivers/mtd/nand/falcon_nand.c
  18
  19 --- a/drivers/mtd/nand/Kconfig
  20 +++ b/drivers/mtd/nand/Kconfig
  21 @@ -510,4 +510,12 @@ config MTD_NAND_XWAY
  22           Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
  23           to the External Bus Unit (EBU).
  24
  25 +config MTD_NAND_FALCON
  26 +       tristate "Support for NAND on Lantiq FALC-ON SoC"
  27 +       depends on LANTIQ && SOC_FALCON
  28 +       select MTD_NAND_PLATFORM
  29 +       help
  30 +         Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is
  31 +         attached to the External Bus Unit (EBU).
  32 +
  33  endif # MTD_NAND
  34 --- a/drivers/mtd/nand/Makefile
  35 +++ b/drivers/mtd/nand/Makefile
  36 @@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)         += jz4740
  37  obj-$(CONFIG_MTD_NAND_GPMI_NAND)       += gpmi-nand/
  38  obj-$(CONFIG_MTD_NAND_XWAY)            += xway_nand.o
  39  obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)   += bcm47xxnflash/
  40 +obj-$(CONFIG_MTD_NAND_FALCON)          += falcon_nand.o
  41
  42  nand-objs := nand_base.o nand_bbt.o
  43 --- /dev/null
  44 +++ b/drivers/mtd/nand/falcon_nand.c
  45 @@ -0,0 +1,83 @@
  46 +/*
  47 + * This program is free software; you can redistribute it and/or modify it
  48 + * under the terms of the GNU General Public License version 2 as published
  49 + * by the Free Software Foundation.
  50 + *
  51 + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
  52 + * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
  53 + */
  54 +
  55 +#include <linux/mtd/nand.h>
  56 +#include <linux/of_platform.h>
  57 +
  58 +#include <lantiq_soc.h>
  59 +
  60 +/* address lines used for NAND control signals */
  61 +#define NAND_ADDR_ALE          0x10000
  62 +#define NAND_ADDR_CLE          0x20000
  63 +
  64 +/* Ready/Busy Status */
  65 +#define MODCON_STS             0x0002
  66 +
  67 +/* Ready/Busy Status Edge */
  68 +#define MODCON_STSEDGE         0x0004
  69 +#define LTQ_EBU_MODCON         0x000C
  70 +
  71 +static const char const *part_probes[] = { "cmdlinepart", "ofpart", NULL };
  72 +
  73 +static int falcon_nand_ready(struct mtd_info *mtd)
  74 +{
  75 +       u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
  76 +
  77 +       return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
  78 +                                               (MODCON_STS | MODCON_STSEDGE)));
  79 +}
  80 +
  81 +static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
  82 +{
  83 +       struct nand_chip *this = mtd->priv;
  84 +       unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
  85 +
  86 +       if (ctrl & NAND_CTRL_CHANGE) {
  87 +               nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
  88 +
  89 +               if (ctrl & NAND_CLE)
  90 +                       nandaddr |= NAND_ADDR_CLE;
  91 +               if (ctrl & NAND_ALE)
  92 +                       nandaddr |= NAND_ADDR_ALE;
  93 +
  94 +               this->IO_ADDR_W = (void __iomem *) nandaddr;
  95 +       }
  96 +
  97 +       if (cmd != NAND_CMD_NONE)
  98 +               writeb(cmd, this->IO_ADDR_W);
  99 +}
 100 +
 101 +static struct platform_nand_data falcon_nand_data = {
 102 +       .chip = {
 103 +               .nr_chips               = 1,
 104 +               .chip_delay             = 25,
 105 +               .part_probe_types       = part_probes,
 106 +       },
 107 +       .ctrl = {
 108 +               .cmd_ctrl               = falcon_hwcontrol,
 109 +               .dev_ready              = falcon_nand_ready,
 110 +       }
 111 +};
 112 +
 113 +int __init falcon_register_nand(void)
 114 +{
 115 +       struct device_node *node;
 116 +       struct platform_device *pdev;
 117 +
 118 +       node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon");
 119 +       if (!node)
 120 +               return -1;
 121 +       pdev = of_find_device_by_node(node);
 122 +       if (pdev)
 123 +               pdev->dev.platform_data = &falcon_nand_data;
 124 +       of_node_put(node);
 125 +       return 0;
 126 +}
 127 +
 128 +arch_initcall(falcon_register_nand);