target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         all0256n | \
  20         all5002 | \
  21         wl-330n)
  22                 ucidef_set_interface_lan "eth0.1"
  23                 ;;
  24
  25         3g-6200n | \
  26         argus-atp52b | \
  27         b2c | \
  28         nw718 | \
  29         psr-680w | \
  30         sl-r7205 | \
  31         w502u | \
  32         wr6202)
  33                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  34                 ;;
  35
  36         f5d8235-v1 | \
  37         f5d8235-v2 | \
  38         ur-336un)
  39                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  40                 ;;
  41
  42         v11st-fe)
  43                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  44                 ucidef_add_switch "switch0" "1" "1"
  45                 ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
  46                 ucidef_add_switch_vlan "switch0" "2" "0 5t"
  47                 ;;
  48
  49         rt-n15 | \
  50         wl-351)
  51                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  52                 ucidef_add_switch "switch0" "1" "1"
  53                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
  54                 ucidef_add_switch_vlan "switch0" "2" "4 5t"
  55                 ;;
  56
  57         rt-n56u)
  58                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  59                 ucidef_add_switch "switch0" "1" "1"
  60                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
  61                 ucidef_add_switch_vlan "switch0" "2" "4 8t"
  62                 ;;
  63
  64         freestation5 | \
  65         wcr-150gn)
  66                 ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
  67                 ;;
  68
  69         wli-tx4-ag300n)
  70                 ucidef_set_interface_lan "eth0"
  71                 ;;
  72
  73         *)
  74                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  75                 if [ -n "${RT3X5X}" ]; then
  76                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  77                 else
  78                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  79                 fi
  80                 ;;
  81         esac
  82 }
  83
  84 ramips_setup_macs()
  85 {
  86         local board="$1"
  87         local lan_mac=""
  88         local wan_mac=""
  89
  90         case $board in
  91         all0256n | \
  92         all5002)
  93                 lan_mac=$(ramips_get_mac_binary factory 40)
  94                 ;;
  95         3g-6200n | \
  96         argus-atp52b | \
  97         b2c | \
  98         f5d8235-v1 | \
  99         nw718 | \
 100         psr-680w | \
 101         rt-n15 | \
 102         sl-r7205 | \
 103         wl-351)
 104                 lan_mac=$(ramips_get_mac_binary factory 4)
 105                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 106                 ;;
 107
 108         w306r-v20)
 109                 lan_mac=$(ramips_get_mac_binary factory 4)
 110                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
 111                 ;;
 112
 113         fonera20n)
 114                 lan_mac=$(ramips_get_mac_binary factory 40)
 115                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 116                 ;;
 117
 118         dir-300-b1 |\
 119         dir-300-b2 |\
 120         dir-600-b1)
 121                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 122                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 123                 ;;
 124
 125         esr-9753 | \
 126         ur-336un)
 127                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 128                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 129                 ;;
 130
 131         nbg-419n | \
 132         wcr-150gn)
 133                 lan_mac=$(ramips_get_mac_binary factory 4)
 134                 wan_mac=$(ramips_get_mac_binary factory 40)
 135                 ;;
 136
 137         f5d8235-v2)
 138                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
 139                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 140                 ;;
 141
 142         rt-n56u)
 143                 lan_mac=$(ramips_get_mac_binary factory 4)
 144                 wan_mac=$(ramips_get_mac_binary factory 32772)
 145                 ;;
 146
 147         w502u)
 148                 lan_mac=$(ramips_get_mac_binary factory 40)
 149                 wan_mac=$(ramips_get_mac_binary factory 46)
 150                 ;;
 151
 152         wl341v3)
 153                 lan_mac=$(ramips_get_mac_binary board-nvram 65440)
 154                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 155                 ;;
 156
 157         wli-tx4-ag300n)
 158                 lan_mac=$(ramips_get_mac_binary factory 4)
 159                 ;;
 160
 161         esac
 162
 163         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 164         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 165 }
 166
 167 [ -e /etc/config/network ] && exit 0
 168
 169 touch /etc/config/network
 170
 171 board=$(ramips_board_name)
 172
 173 ramips_setup_interfaces $board
 174 ramips_setup_macs $board
 175
 176 uci commit network
 177
 178 exit 0