target/linux/ramips/dts/DIR-600-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-600-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-600 B1";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27         };
  28
  29         cfi@1f000000 {
  30                 compatible = "cfi-flash";
  31                 reg = <0x1f000000 0x800000>;
  32
  33                 bank-width = <2>;
  34                 device-width = <2>;
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37         };
  38
  39         ethernet@10100000 {
  40                 status = "okay";
  41         };
  42
  43         esw@10110000 {
  44                 status = "okay";
  45                 ralink,portmap = <0x2f>;
  46         };
  47
  48         gpio-keys-polled {
  49                 compatible = "gpio-keys-polled";
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 poll-interval = <20>;
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio0 10 1>;
  56                         linux,code = <0x198>;
  57                 };
  58                 wps {
  59                         label = "wps";
  60                         gpios = <&gpio0 0 1>;
  61                         linux,code = <0x211>;
  62                 };
  63         };
  64
  65         wmac@10180000 {
  66                 status = "okay";
  67         };
  68
  69         gpio-leds {
  70                 compatible = "gpio-leds";
  71                 status {
  72                         label = "d-link:amber:status";
  73                         gpios = <&gpio0 8 1>;
  74                 };
  75                 status2 {
  76                         label = "d-link:green:status";
  77                         gpios = <&gpio0 9 1>;
  78                 };
  79                 wan {
  80                         label = "d-link:amber:wan";
  81                         gpios = <&gpio0 14 1>;
  82                 };
  83                 wan2 {
  84                         label = "d-link:green:wan";
  85                         gpios = <&gpio0 12 1>;
  86                 };
  87                 wps {
  88                         label = "d-link:blue:wps";
  89                         gpios = <&gpio0 13 1>;
  90                 };
  91         };
  92 };