target/linux/ramips/dts/F7C027.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "F7C027", "ralink,rt5350-soc";
   7         model = "Belkin F7C027";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12                         m25p80@0 {
  13                                 #address-cells = <1>;
  14                                 #size-cells = <1>;
  15                                 compatible = "mx25l12805d";
  16                                 reg = <0 0>;
  17                                 linux,modalias = "m25p80", "mx25l12805d";
  18                                 spi-max-frequency = <10000000>;
  19
  20                                 partition@0 {
  21                                         label = "u-boot";
  22                                         reg = <0x0 0x30000>;
  23                                         read-only;
  24                                 };
  25
  26                                 partition@30000 {
  27                                         label = "u-boot-env";
  28                                         reg = <0x30000 0x10000>;
  29                                         read-only;
  30                                 };
  31
  32                                 factory: partition@40000 {
  33                                         label = "factory";
  34                                         reg = <0x40000 0x10000>;
  35                                         read-only;
  36                                 };
  37
  38                                 partition@50000 {
  39                                         label = "firmware";
  40                                         reg = <0x50000 0x770000>;
  41                                 };
  42
  43                                 partition@7c0000 {
  44                                         label = "firmware2";
  45                                         reg = <0x7c0000 0x770000>;
  46                                 };
  47
  48                                 partition@f30000 {
  49                                         label = "belkin_settings";
  50                                         reg = <0xf30000 0xa0000>;
  51                                 };
  52
  53                                 partition@fd0000 {
  54                                         label = "unknown";
  55                                         reg = <0xfd0000 0x10000>;
  56                                 };
  57
  58                                 partition@fe0000 {
  59                                         label = "nvram";
  60                                         reg = <0xfe0000 0x10000>;
  61                                 };
  62
  63                                 partition@ff0000 {
  64                                         label = "user_factory";
  65                                         reg = <0xff0000 0x10000>;
  66                                 };
  67                         };
  68                 };
  69         };
  70
  71         pinctrl {
  72                 state_default: pinctrl0 {
  73                         gpio {
  74                                 ralink,group = "i2c", "jtag", "uartf";
  75                                 ralink,function = "gpio";
  76                         };
  77                 };
  78         };
  79
  80         gpio-leds {
  81                 compatible = "gpio-leds";
  82                 status {
  83                         label = "belkin:blue:status";
  84                         gpios = <&gpio0 7 1>;
  85                 };
  86                 power {
  87                         label = "belkin:blue:power";
  88                         gpios = <&gpio0 9 1>;
  89                 };
  90                 orange {
  91                         label = "belkin:orange:status";
  92                         gpios = <&gpio0 11 1>;
  93                 };
  94                 relay {
  95                         label = "belkin:device:relay";
  96                         gpios = <&gpio0 13 0>;
  97                 };
  98         };
  99         gpio-keys-polled {
 100                 compatible = "gpio-keys-polled";
 101                 #address-cells = <1>;
 102                 #size-cells = <0>;
 103                 poll-interval = <20>;
 104                 top {
 105                         label = "top";
 106                         gpios = <&gpio0 10 1>;
 107                         linux,code = <0x198>;
 108                 };
 109                 power {
 110                         label = "power";
 111                         gpios = <&gpio0 12 1>;
 112                         linux,code = <0x100>;
 113                 };
 114                 sensor {
 115                         label = "sensor";
 116                         gpios = <&gpio0 14 1>;
 117                         linux,code = <0x101>;
 118                 };
 119         };
 120 };