target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "FONERA20N", "ralink,rt3052-soc";
   7         model = "La Fonera 2.0N";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x7b0000>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 wifi {
  54                         label = "fonera20n:orange:wifi";
  55                         gpios = <&gpio0 7 1>;
  56                 };
  57                 power {
  58                         label = "fonera20n:green:power";
  59                         gpios = <&gpio0 9 1>;
  60                 };
  61                 usb {
  62                         label = "fonera20n:orange:usb";
  63                         gpios = <&gpio0 14 1>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 poll-interval = <20>;
  72                 reset {
  73                         label = "reset";
  74                         gpios = <&gpio0 12 1>;
  75                         linux,code = <0x198>;
  76                 };
  77                 switch {
  78                         label = "switch";
  79                         gpios = <&gpio0 13 1>;
  80                         linux,code = <0xf7>;
  81                         linux,input-type = <5>; /* EV_SW */
  82                 };
  83         };
  84
  85         ethernet@10100000 {
  86                 mtd-mac-address = <&factory 0x28>;
  87         };
  88
  89         esw@10110000 {
  90                 ralink,portmap = <0x2f>;
  91
  92                 port@0 {
  93                         compatible = "swconfig,port";
  94                         swconfig,segment = "lan";
  95                         swconfig,portmap = <0 4>;
  96                 };
  97                 port@1 {
  98                         compatible = "swconfig,port";
  99                         swconfig,segment = "lan";
 100                         swconfig,portmap = <1 3>;
 101                 };
 102                 port@2 {
 103                         compatible = "swconfig,port";
 104                         swconfig,segment = "lan";
 105                         swconfig,portmap = <2 2>;
 106                 };
 107                 port@3 {
 108                         compatible = "swconfig,port";
 109                         swconfig,segment = "lan";
 110                         swconfig,portmap = <3 1>;
 111                 };
 112                 port@4 {
 113                         compatible = "swconfig,port";
 114                         swconfig,segment = "wan";
 115                         swconfig,portmap = <4 0>;
 116                 };
 117         };
 118
 119         otg@101c0000 {
 120                 status = "okay";
 121         };
 122 };