target/linux/ramips/dts/MT7620a_MT7530.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620a + MT7530 evaluation board";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12
  13                         m25p80@0 {
  14                                 #address-cells = <1>;
  15                                 #size-cells = <1>;
  16                                 compatible = "jedec,spi-nor";
  17                                 reg = <0 0>;
  18                                 linux,modalias = "m25p80", "s25fl064k";
  19                                 spi-max-frequency = <10000000>;
  20
  21                                 partition@0 {
  22                                         label = "u-boot";
  23                                         reg = <0x0 0x30000>;
  24                                         read-only;
  25                                 };
  26
  27                                 partition@30000 {
  28                                         label = "u-boot-env";
  29                                         reg = <0x30000 0x10000>;
  30                                         read-only;
  31                                 };
  32
  33                                 factory: partition@40000 {
  34                                         label = "factory";
  35                                         reg = <0x40000 0x10000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@50000 {
  40                                         label = "firmware";
  41                                         reg = <0x50000 0x7b0000>;
  42                                 };
  43                         };
  44                 };
  45         };
  46
  47         pinctrl {
  48                 state_default: pinctrl0 {
  49                         gpio {
  50                                 ralink,group = "i2c", "uartf";
  51                                 ralink,function = "gpio";
  52                         };
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 status = "okay";
  58                 pinctrl-names = "default";
  59                 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  60                 mediatek,portmap = "llllw";
  61
  62                 port@5 {
  63                         status = "okay";
  64                         mediatek,fixed-link = <1000 1 1 1>;
  65                         phy-mode = "rgmii";
  66                 };
  67
  68                 mdio-bus {
  69                         status = "okay";
  70
  71                         phy0: ethernet-phy@0 {
  72                                 reg = <0>;
  73                                 phy-mode = "rgmii";
  74                         };
  75
  76                         phy1: ethernet-phy@1 {
  77                                 reg = <1>;
  78                                 phy-mode = "rgmii";
  79                         };
  80
  81                         phy2: ethernet-phy@2 {
  82                                 reg = <2>;
  83                                 phy-mode = "rgmii";
  84                         };
  85
  86                         phy3: ethernet-phy@3 {
  87                                 reg = <3>;
  88                                 phy-mode = "rgmii";
  89                         };
  90
  91                         phy4: ethernet-phy@4 {
  92                                 reg = <4>;
  93                                 phy-mode = "rgmii";
  94                         };
  95
  96                         phy1f: ethernet-phy@1f {
  97                                 reg = <0x1f>;
  98                                 phy-mode = "rgmii";
  99                         };
 100                 };
 101         };
 102
 103         gsw@10110000 {
 104                 mediatek,port4 = "gmac";
 105                 mediatek,mt7530 = <1>;
 106         };
 107
 108         pcie@10140000 {
 109                 status = "okay";
 110         };
 111
 112         ehci@101c0000 {
 113                 status = "okay";
 114         };
 115
 116         ohci@101c1000 {
 117                 status = "okay";
 118         };
 119 };