target/linux/ramips/dts/NA930.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Sercomm NA930";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,57600";
  11         };
  12
  13         pinctrl {
  14                 state_default: pinctrl0 {
  15                         gpio {
  16                                 ralink,group = "i2c", "rgmii2", "spi", "ephy";
  17                                 ralink,function = "gpio";
  18                         };
  19
  20                         uartf_gpio {
  21                                 ralink,group = "uartf";
  22                                 ralink,function = "gpio uartf";
  23                         };
  24                 };
  25         };
  26
  27         palmbus@10000000 {
  28                 uart@500 {
  29                         status = "okay";
  30                 };
  31
  32                 gpio@638 {
  33                         status = "okay";
  34                 };
  35
  36                 gpio@660 {
  37                         status = "okay";
  38                 };
  39         };
  40
  41         nand {
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 compatible = "mtk,mt7620-nand";
  45
  46                 partition@0 {
  47                         label = "u-boot";
  48                         reg = <0x0 0x20000>;
  49                         read-only;
  50                 };
  51
  52                 partition@200000 {
  53                         label = "factory";
  54                         reg = <0x200000 0x40000>;
  55                         read-only;
  56                 };
  57
  58                 partition@240000 {
  59                         label = "Config";
  60                         reg = <0x240000 0x400000>;
  61                         read-only;
  62                 };
  63
  64                 partition@640000 {
  65                         label = "firmware";
  66                         reg = <0x640000 0x1400000>;
  67                 };
  68         };
  69
  70         ethernet@10100000 {
  71                 status = "okay";
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
  74                 mediatek,portmap = "llllw";
  75
  76                 port@4 {
  77                         status = "okay";
  78                         phy-handle = <&phy4>;
  79                         phy-mode = "rgmii";
  80                 };
  81
  82                 port@5 {
  83                         status = "okay";
  84                         phy-handle = <&phy5>;
  85                         phy-mode = "rgmii";
  86                 };
  87
  88                 mdio-bus {
  89                         status = "okay";
  90
  91                         phy4: ethernet-phy@4 {
  92                                 reg = <4>;
  93                                 phy-mode = "rgmii";
  94                         };
  95
  96                         phy5: ethernet-phy@5 {
  97                                 reg = <5>;
  98                                 phy-mode = "rgmii";
  99                         };
 100                 };
 101         };
 102
 103         gpio-keys-polled {
 104                 compatible = "gpio-keys-polled";
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107                 poll-interval = <20>;
 108
 109                 reset {
 110                         label = "reset";
 111                         gpios = <&gpio0 11 1>;
 112                         linux,code = <0x198>;
 113                 };
 114
 115                 zwave {
 116                         label = "zwave";
 117                         gpios = <&gpio0 12 1>;
 118                         linux,code = <0x100>;
 119                 };
 120
 121                 wps {
 122                         label = "wps";
 123                         gpios = <&gpio0 14 1>;
 124                         linux,code = <0x211>;
 125                 };
 126         };
 127
 128         gpio-leds {
 129                 compatible = "gpio-leds";
 130
 131                 zwave {
 132                         label = "na930:blue:zwave";
 133                         gpios = <&gpio2 0 1>;
 134                 };
 135
 136                 status {
 137                         label = "na930:blue:status";
 138                         gpios = <&gpio2 26 1>;
 139                 };
 140
 141                 service {
 142                         label = "na930:blue:service";
 143                         gpios = <&gpio2 28 1>;
 144                 };
 145
 146                 power {
 147                         label = "na930:blue:power";
 148                         gpios = <&gpio2 29 1>;
 149                 };
 150         };
 151
 152         gpio_export {
 153                 compatible = "gpio-export";
 154                 #size-cells = <0>;
 155
 156                 telit {
 157                         gpio-export,name = "telit";
 158                         gpio-export,output = <1>;
 159                         gpios = <&gpio0 13 0>;
 160                 };
 161         };
 162
 163         gsw@10110000 {
 164                 mediatek,port4 = "gmac";
 165         };
 166
 167         ehci@101c0000 {
 168                 status = "okay";
 169         };
 170
 171         ohci@101c1000 {
 172                 status = "okay";
 173         };
 174 };