target/linux/ramips/dts/RUT5XX.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RUT5XX", "ralink,rt3050-soc";
   7         model = "Teltonika RUT5XX";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12                         m25p80@0 {
  13                                 #address-cells = <1>;
  14                                 #size-cells = <1>;
  15                                 compatible = "n25q128a13";
  16                                 reg = <0 0>;
  17                                 linux,modalias = "m25p80", "n25q128a13";
  18                                 spi-max-frequency = <10000000>;
  19
  20                                 partition@0 {
  21                                         label = "u-boot";
  22                                         reg = <0x0 0x30000>;
  23                                         read-only;
  24                                 };
  25
  26                                 partition@30000 {
  27                                         label = "u-boot-env";
  28                                         reg = <0x30000 0x10000>;
  29                                         read-only;
  30                                 };
  31
  32                                 factory: partition@40000 {
  33                                         label = "factory";
  34                                         reg = <0x40000 0x10000>;
  35                                         read-only;
  36                                 };
  37
  38                                 partition@50000 {
  39                                         label = "firmware";
  40                                         reg = <0x50000 0xfb0000>;
  41                                 };
  42                         };
  43                 };
  44         };
  45
  46         pinctrl {
  47                 state_default: pinctrl0 {
  48                         gpio {
  49                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  50                                 ralink,function = "gpio";
  51                         };
  52                 };
  53         };
  54
  55         ethernet@10100000 {
  56                 mtd-mac-address = <&factory 0x28>;
  57         };
  58
  59         esw@10110000 {
  60                 ralink,portmap = <0x3e>;
  61         };
  62
  63         wmac@10180000 {
  64                 ralink,mtd-eeprom = <&factory 0>;
  65         };
  66
  67         gpio-leds {
  68                 compatible = "gpio-leds";
  69                 status {
  70                         label = "rut5xx:green:status";
  71                         gpios = <&gpio0 14 1>;
  72                 };
  73         };
  74
  75         gpio-keys-polled {
  76                 compatible = "gpio-keys-polled";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 poll-interval = <20>;
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio0 10 1>;
  83                         linux,code = <0x198>;
  84                 };
  85         };
  86
  87         otg@101c0000 {
  88                 status = "okay";
  89         };
  90 };