target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G300M", "ralink,rt3050-soc";
   7         model = "Tenda 3G300M";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23         };
  24
  25         cfi@1f000000 {
  26                 compatible = "cfi-flash";
  27                 reg = <0x1f000000 0x800000>;
  28
  29                 bank-width = <2>;
  30                 device-width = <2>;
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33
  34                 partition@0 {
  35                         label = "u-boot";
  36                         reg = <0x0 0x30000>;
  37                         read-only;
  38                 };
  39
  40                 partition@30000 {
  41                         label = "u-boot-env";
  42                         reg = <0x30000 0x10000>;
  43                         read-only;
  44                 };
  45
  46                 factory: partition@40000 {
  47                         label = "factory";
  48                         reg = <0x40000 0x10000>;
  49                         read-only;
  50                 };
  51
  52                 partition@50000 {
  53                         label = "firmware";
  54                         reg = <0x50000 0x3c8000>;
  55                 };
  56         };
  57
  58         gpio-leds {
  59                 compatible = "gpio-leds";
  60                 3grouter {
  61                         label = "tenda:blue:3grouter";
  62                         gpios = <&gpio0 11 1>;
  63                 };
  64                 ap {
  65                         label = "tenda:blue:ap";
  66                         gpios = <&gpio0 12 1>;
  67                 };
  68                 wisprouter {
  69                         label = "tenda:blue:wisprouter";
  70                         gpios = <&gpio0 9 1>;
  71                 };
  72                 wirelessrouter {
  73                         label = "tenda:blue:wirelessrouter";
  74                         gpios = <&gpio0 13 1>;
  75                 };
  76                 3g {
  77                         label = "tenda:blue:3g";
  78                         gpios = <&gpio0 7 1>;
  79                 };
  80                 wpsreset {
  81                         label = "tenda:blue:wpsreset";
  82                         gpios = <&gpio0 14 1>;
  83                 };
  84         };
  85
  86         gpio-keys-polled {
  87                 compatible = "gpio-keys-polled";
  88                 #address-cells = <1>;
  89                 #size-cells = <0>;
  90                 poll-interval = <20>;
  91                 reset {
  92                         label = "reset";
  93                         gpios = <&gpio0 0 1>;
  94                         linux,code = <0x198>;
  95                 };
  96                 mode {
  97                         label = "mode";
  98                         gpios = <&gpio0 10 1>;
  99                         linux,code = <0x100>;
 100                 };
 101         };
 102
 103         ethernet@10100000 {
 104                 status = "okay";
 105         };
 106
 107         esw@10110000 {
 108                 status = "okay";
 109                 ralink,portmap = <0x2f>;
 110         };
 111
 112         wmac@10180000 {
 113                 status = "okay";
 114         };
 115 };