ramips: remove top-level {address,size}-cells properties from .dts files
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / W150M.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "3G300M", "ralink,rt3050-soc";
7 model = "Tenda 3G300M";
8
9 memorydetect {
10 ralink,memory = <0x0 0x200000 0x4000000>;
11 };
12
13 chosen {
14 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)";
15 };
16
17 palmbus@10000000 {
18 sysc@0 {
19 ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
20 ralink,uartmux = "gpio";
21 ralink,wdtmux = <1>;
22 };
23
24 gpio0: gpio@600 {
25 status = "okay";
26 };
27 };
28
29 cfi@1f000000 {
30 compatible = "cfi-flash";
31 reg = <0x1f000000 0x800000>;
32
33 bank-width = <2>;
34 device-width = <2>;
35 #address-cells = <1>;
36 #size-cells = <1>;
37 };
38
39 gpio-leds {
40 compatible = "gpio-leds";
41 3grouter {
42 label = "tenda:blue:3grouter";
43 gpios = <&gpio0 11 1>;
44 };
45 ap {
46 label = "tenda:blue:ap";
47 gpios = <&gpio0 12 1>;
48 };
49 wisprouter {
50 label = "tenda:blue:wisprouter";
51 gpios = <&gpio0 9 1>;
52 };
53 wirelessrouter {
54 label = "tenda:blue:wirelessrouter";
55 gpios = <&gpio0 13 1>;
56 };
57 3g {
58 label = "tenda:blue:3g";
59 gpios = <&gpio0 7 1>;
60 };
61 wpsreset {
62 label = "tenda:blue:wpsreset";
63 gpios = <&gpio0 14 1>;
64 };
65 };
66
67 gpio-keys-polled {
68 compatible = "gpio-keys-polled";
69 #address-cells = <1>;
70 #size-cells = <0>;
71 poll-interval = <20>;
72 reset {
73 label = "reset";
74 gpios = <&gpio0 0 1>;
75 linux,code = <0x198>;
76 };
77 mode {
78 label = "mode";
79 gpios = <&gpio0 10 1>;
80 linux,code = <0x100>;
81 };
82 };
83
84 ethernet@10100000 {
85 status = "okay";
86 };
87
88 esw@10110000 {
89 status = "okay";
90 ralink,portmap = <0x2f>;
91 };
92
93 wmac@10180000 {
94 status = "okay";
95 };
96 };