#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "u-boot-env",
.offset = 0x040000,
.size = 0x010000,
- } , {
+ }, {
.name = "kernel",
.offset = 0x050000,
.size = 0x160000,
- } , {
+ }, {
.name = "rootfs",
.offset = 0x1b0000,
- .size = 0x610000,
- } , {
- .name = "config",
- .offset = 0x7c0000,
- .size = 0x020000,
- } , {
+ .size = 0x630000,
+ }, {
.name = "art",
.offset = 0x7e0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "firmware",
.offset = 0x050000,
- .size = 0x770000,
+ .size = 0x790000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data mzk_w300nh_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
- .parts = mzk_w300nh_partitions,
- .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions),
+ .parts = mzk_w300nh_partitions,
+ .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions),
#endif
};
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- ar71xx_set_mac_base(eeprom);
-
ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
- mzk_w300nh_leds_gpio);
+ mzk_w300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(mzk_w300nh_gpio_buttons),
- mzk_w300nh_gpio_buttons);
- ar913x_add_device_wmac(eeprom, NULL);
+ ARRAY_SIZE(mzk_w300nh_gpio_buttons),
+ mzk_w300nh_gpio_buttons);
+ ar9xxx_add_device_wmac(eeprom, NULL);
}
MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",