[ixp4xx]: remove unneeded patches

SVN-Revision: 23774

diff --git a/target/linux/ixp4xx/patches-2.6.36/050-disable_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.36/050-disable_dmabounce.patch
deleted file mode 100644 (file)
index bdbec61..0000000
--- a/target/linux/ixp4xx/patches-2.6.36/050-disable_dmabounce.patch
+++ /dev/null
@@ -1,154 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -435,7 +435,6 @@ config ARCH_IXP4XX
-       select CPU_XSCALE
-       select GENERIC_GPIO
-       select GENERIC_CLOCKEVENTS
--      select DMABOUNCE if PCI
-       help
-         Support for Intel's IXP4XX (XScale) family of processors.
- 
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -199,6 +199,43 @@ config IXP4XX_INDIRECT_PCI
-         need to use the indirect method instead. If you don't know
-         what you need, leave this option unselected.
- 
-+config IXP4XX_LEGACY_DMABOUNCE
-+      bool "Legacy PCI DMA bounce support"
-+      depends on PCI
-+      default n
-+      select DMABOUNCE
-+      help
-+        The IXP4xx is limited to a 64MB window for PCI DMA, which
-+        requires that PCI accesses >= 64MB are bounced via buffers
-+        below 64MB.
-+
-+        The kernel has traditionally handled this issue by using ARM
-+        specific DMA bounce support code for all accesses >= 64MB.
-+        That code causes problems of its own, so it is desirable to
-+        disable it.
-+
-+        Enabling this option makes IXP4xx continue to use the problematic
-+        ARM DMA bounce code. Disabling this option makes IXP4xx use the
-+        kernel's generic bounce code.
-+
-+        Say 'N'.
-+
-+config IXP4XX_ZONE_DMA
-+      bool "Support > 64MB RAM"
-+      depends on !IXP4XX_LEGACY_DMABOUNCE
-+      default y
-+      select ZONE_DMA
-+      help
-+        The IXP4xx is limited to a 64MB window for PCI DMA, which
-+        requires that PCI accesses above 64MB are bounced via buffers
-+        below 64MB.
-+
-+        Disabling this option allows you to omit the support code for
-+        DMA-able memory allocations and DMA bouncing, but the kernel
-+        will then not work properly if more than 64MB of RAM is present.
-+
-+        Say 'Y' unless your platform is limited to <= 64MB of RAM.
-+
- config IXP4XX_QMGR
-       tristate "IXP4xx Queue Manager support"
-       help
---- a/arch/arm/mach-ixp4xx/common-pci.c
-+++ b/arch/arm/mach-ixp4xx/common-pci.c
-@@ -321,27 +321,33 @@ static int abort_handler(unsigned long a
-  */
- static int ixp4xx_pci_platform_notify(struct device *dev)
- {
--      if(dev->bus == &pci_bus_type) {
--              *dev->dma_mask =  SZ_64M - 1;
-+      if (dev->bus == &pci_bus_type) {
-+              *dev->dma_mask = SZ_64M - 1;
-               dev->coherent_dma_mask = SZ_64M - 1;
-+#ifdef CONFIG_DMABOUNCE
-               dmabounce_register_dev(dev, 2048, 4096);
-+#endif
-       }
-       return 0;
- }
- 
- static int ixp4xx_pci_platform_notify_remove(struct device *dev)
- {
--      if(dev->bus == &pci_bus_type) {
-+#ifdef CONFIG_DMABOUNCE
-+      if (dev->bus == &pci_bus_type)
-               dmabounce_unregister_dev(dev);
--      }
-+#endif
-       return 0;
- }
- 
--int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-+#ifdef CONFIG_DMABOUNCE
-+int dma_needs_bounce_2(struct device *dev, dma_addr_t dma_addr, size_t size)
- {
--      return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
-+      return (dev->bus == &pci_bus_type ) && ((dma_addr + size) > SZ_64M);
- }
-+#endif
- 
-+#ifdef CONFIG_ZONE_DMA
- /*
-  * Only first 64MB of memory can be accessed via PCI.
-  * We use GFP_DMA to allocate safe buffers to do map/unmap.
-@@ -364,6 +370,7 @@ void __init ixp4xx_adjust_zones(unsigned
-       zhole_size[1] = zhole_size[0];
-       zhole_size[0] = 0;
- }
-+#endif
- 
- void __init ixp4xx_pci_preinit(void)
- {
---- a/arch/arm/mach-ixp4xx/include/mach/memory.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
-@@ -16,10 +16,12 @@
- 
- #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
- 
-+#ifdef CONFIG_ZONE_DMA
- void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
- 
- #define arch_adjust_zones(size, holes) \
-       ixp4xx_adjust_zones(size, holes)
-+#endif
- 
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
- #define MAX_DMA_ADDRESS               (PAGE_OFFSET + SZ_64M)
---- a/arch/arm/common/dmabounce.c
-+++ b/arch/arm/common/dmabounce.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/dmapool.h>
- #include <linux/list.h>
-+#include <linux/pci.h>
- #include <linux/scatterlist.h>
- 
- #include <asm/cacheflush.h>
-@@ -248,7 +249,13 @@ static inline dma_addr_t map_single(stru
-               needs_bounce = (dma_addr | (dma_addr + size - 1)) & ~mask;
-       }
- 
--      if (device_info && (needs_bounce || dma_needs_bounce(dev, dma_addr, size))) {
-+#ifdef CONFIG_DMABOUNCE
-+int dma_needs_bounce_2(struct device *dev, dma_addr_t dma_addr, size_t size)
-+{
-+      return (dev->bus == &pci_bus_type ) && ((dma_addr + size) > SZ_64M);
-+}
-+
-+      if (device_info && (needs_bounce || dma_needs_bounce_2(dev, dma_addr, size))) {
-               struct safe_buffer *buf;
- 
-               buf = alloc_safe_buffer(device_info, ptr, size, dir);
-@@ -282,6 +289,7 @@ static inline dma_addr_t map_single(stru
- 
-       return dma_addr;
- }
-+#endif
- 
- static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
-               size_t size, enum dma_data_direction dir)

diff --git a/target/linux/ixp4xx/patches-2.6.36/601-arm-dma_free_coherent.patch b/target/linux/ixp4xx/patches-2.6.36/601-arm-dma_free_coherent.patch
deleted file mode 100644 (file)
index e26adbf..0000000
--- a/target/linux/ixp4xx/patches-2.6.36/601-arm-dma_free_coherent.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/mm/dma-mapping.c
-+++ b/arch/arm/mm/dma-mapping.c
-@@ -381,7 +381,8 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
-  */
- void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
- {
--      WARN_ON(irqs_disabled());
-+      if (irqs_disabled()) /* don't want stack dumps for these! */
-+              printk("WARNING: at %s:%d %s()\n", __FILE__, __LINE__, __FUNCTION__);
- 
-       if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-               return;

diff --git a/target/linux/ixp4xx/patches-2.6.36/603-arm-kluin-array-indexing.patch b/target/linux/ixp4xx/patches-2.6.36/603-arm-kluin-array-indexing.patch
deleted file mode 100644 (file)
index 3a8c80d..0000000
--- a/target/linux/ixp4xx/patches-2.6.36/603-arm-kluin-array-indexing.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -323,12 +323,13 @@ static void __init setup_processor(void)
- void cpu_init(void)
- {
-       unsigned int cpu = smp_processor_id();
--      struct stack *stk = &stacks[cpu];
-+      struct stack *stk;
- 
-       if (cpu >= NR_CPUS) {
-               printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
-               BUG();
-       }
-+      stk = &stacks[cpu];
- 
-       /*
-        * Define the placement constraint for the inline asm directive below.
-@@ -387,13 +388,14 @@ static struct machine_desc * __init setu
- 
- static int __init arm_add_memory(unsigned long start, unsigned long size)
- {
--      struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-+      struct membank *bank;
- 
-       if (meminfo.nr_banks >= NR_BANKS) {
-               printk(KERN_CRIT "NR_BANKS too low, "
-                       "ignoring memory at %#lx\n", start);
-               return -EINVAL;
-       }
-+      bank = &meminfo.bank[meminfo.nr_banks];
- 
-       /*
-        * Ensure that start/size are aligned to a page boundary.