ramips: add initial support for 3.2
authorGabor Juhos <juhosg@openwrt.org>
Sun, 12 Feb 2012 12:52:14 +0000 (12:52 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sun, 12 Feb 2012 12:52:14 +0000 (12:52 +0000)
SVN-Revision: 30476

13 files changed:
target/linux/ramips/Makefile
target/linux/ramips/patches-3.2/001-mips-add-cp0-compare-irq-function.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/011-mtd-cfi_cmdset_0002-force-word-write.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/100-mips-ralink-core.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/102-rt288x-pci-driver-hook.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/103-ethernet.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/105-ramips-spi-driver.patch [new file with mode: 0644]
target/linux/ramips/patches-3.2/105-usb_dwc_otg.patch [new file with mode: 0644]
target/linux/ramips/rt288x/config-3.2 [new file with mode: 0644]
target/linux/ramips/rt305x/config-3.2 [new file with mode: 0644]

index 16fc2c6..85279d5 100644 (file)
@@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x
 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
 FEATURES:=squashfs
 
-LINUX_VERSION:=2.6.39.4
+LINUX_VERSION:=3.2.5
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\
diff --git a/target/linux/ramips/patches-3.2/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.2/001-mips-add-cp0-compare-irq-function.patch
new file mode 100644 (file)
index 0000000..114e35c
--- /dev/null
@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -54,6 +54,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/uasm.h>
++#include <asm/time.h>
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1583,6 +1584,8 @@ void __cpuinit per_cpu_trap_init(void)
+       if (cpu_has_mips_r2) {
+               cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+               cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++              if (get_c0_compare_irq)
++                      cp0_compare_irq = get_c0_compare_irq();
+               cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+               if (cp0_perfcount_irq == cp0_compare_irq)
+                       cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
+  */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
diff --git a/target/linux/ramips/patches-3.2/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.2/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
new file mode 100644 (file)
index 0000000..494b790
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1627,7 +1627,7 @@ static int __xipram do_erase_chip(struct
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr))
++              if (chip_good(map, adr, map_word_ff(map)))
+                       break;
+               if (time_after(jiffies, timeo)) {
+@@ -1715,7 +1715,7 @@ static int __xipram do_erase_oneblock(st
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr)) {
++              if (chip_good(map, adr, map_word_ff(map))) {
+                       xip_enable(map, chip, adr);
+                       break;
+               }
diff --git a/target/linux/ramips/patches-3.2/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.2/011-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644 (file)
index 0000000..d2aa085
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ #define MAX_WORD_RETRIES 3
+@@ -50,7 +50,9 @@
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+       struct map_info *map = mtd->priv;
+@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
+               mtd->write = cfi_amdstd_write_buffers;
+       }
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1372,6 +1376,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+                                   unsigned long adr, const u_char *buf,
+                                   int len)
+@@ -1483,7 +1488,6 @@ static int __xipram do_write_buffer(stru
+       return ret;
+ }
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, const u_char *buf)
+ {
+@@ -1562,6 +1566,7 @@ static int cfi_amdstd_write_buffers(stru
+       return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /*
diff --git a/target/linux/ramips/patches-3.2/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.2/100-mips-ralink-core.patch
new file mode 100644 (file)
index 0000000..5e120ef
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -87,6 +87,9 @@ config ATH79
+       help
+         Support for the Atheros AR71XX/AR724X/AR913X SoCs.
++config MIPS_RALINK
++      bool "Ralink MIPS SoC based boards"
++
+ config BCM47XX
+       bool "Broadcom BCM47XX based boards"
+       select CEVT_R4K
+@@ -794,6 +797,7 @@ source "arch/mips/jz4740/Kconfig"
+ source "arch/mips/lantiq/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
++source "arch/mips/ralink/Kconfig"
+ source "arch/mips/powertv/Kconfig"
+ source "arch/mips/sgi-ip27/Kconfig"
+ source "arch/mips/sibyte/Kconfig"
+@@ -1143,7 +1147,7 @@ config BOOT_ELF32
+ config MIPS_L1_CACHE_SHIFT
+       int
+-      default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
++      default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
+       default "6" if MIPS_CPU_SCACHE
+       default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+       default "5"
+--- a/arch/mips/Kbuild.platforms
++++ b/arch/mips/Kbuild.platforms
+@@ -21,6 +21,7 @@ platforms += pmc-sierra
+ platforms += pnx833x
+ platforms += pnx8550
+ platforms += powertv
++platforms += ralink
+ platforms += rb532
+ platforms += sgi-ip22
+ platforms += sgi-ip27
diff --git a/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch
new file mode 100644 (file)
index 0000000..3ba1e53
--- /dev/null
@@ -0,0 +1,91 @@
+--- a/drivers/tty/serial/8250.c
++++ b/drivers/tty/serial/8250.c
+@@ -318,9 +318,9 @@ static const struct serial8250_config ua
+       },
+ };
+-#if defined(CONFIG_MIPS_ALCHEMY)
++#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
+-/* Au1x00 UART hardware has a weird register layout */
++/* Au1x00 and RT288x UART hardware has a weird register layout */
+ static const u8 au_io_in_map[] = {
+       [UART_RX]  = 0,
+       [UART_IER] = 2,
+@@ -542,8 +542,8 @@ static inline void _serial_dl_write(stru
+       serial_outp(up, UART_DLM, value >> 8 & 0xff);
+ }
+-#if defined(CONFIG_MIPS_ALCHEMY)
+-/* Au1x00 haven't got a standard divisor latch */
++#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
++/* Au1x00 and RT288x haven't got a standard divisor latch */
+ static int serial_dl_read(struct uart_8250_port *up)
+ {
+       if (up->port.iotype == UPIO_AU)
+@@ -750,22 +750,19 @@ static int size_fifo(struct uart_8250_po
+  */
+ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+ {
+-      unsigned char old_dll, old_dlm, old_lcr;
++      unsigned char old_lcr;
++      unsigned int old_dl;
+       unsigned int id;
+       old_lcr = serial_inp(p, UART_LCR);
+       serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
+-      old_dll = serial_inp(p, UART_DLL);
+-      old_dlm = serial_inp(p, UART_DLM);
++      old_dl = serial_dl_read(p);
+-      serial_outp(p, UART_DLL, 0);
+-      serial_outp(p, UART_DLM, 0);
++      serial_dl_write(p, 0);
++      id = serial_dl_read(p);
+-      id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
+-
+-      serial_outp(p, UART_DLL, old_dll);
+-      serial_outp(p, UART_DLM, old_dlm);
++      serial_dl_write(p, old_dl);
+       serial_outp(p, UART_LCR, old_lcr);
+       return id;
+@@ -891,7 +888,7 @@ static int broken_efr(struct uart_8250_p
+       /*
+        * Exar ST16C2550 "A2" devices incorrectly detect as
+        * having an EFR, and report an ID of 0x0201.  See
+-       * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 
++       * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+        */
+       if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+               return 1;
+--- a/drivers/tty/serial/Kconfig
++++ b/drivers/tty/serial/Kconfig
+@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
+         system, say Y to this option.  The driver can handle 1, 2, or 3 port
+         cards.  If unsure, say N.
++config SERIAL_8250_RT288X
++      bool "Ralink RT288x/RT305x serial port support"
++      depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
++      help
++        If you have a Ralink RT288x/RT305x SoC based board and want to use the
++        serial port, say Y to this option. The driver can handle up to 2 serial
++        ports. If unsure, say N.
++
+ config SERIAL_8250_RM9K
+       bool "Support for MIPS RM9xxx integrated serial port"
+       depends on SERIAL_8250 != n && SERIAL_RM9000
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -317,7 +317,7 @@ struct uart_port {
+ #define UPIO_HUB6             (1)
+ #define UPIO_MEM              (2)
+ #define UPIO_MEM32            (3)
+-#define UPIO_AU                       (4)                     /* Au1x00 type IO */
++#define UPIO_AU                       (4)                     /* Au1x00 and RT288x type IO */
+ #define UPIO_TSI              (5)                     /* Tsi108/109 type IO */
+ #define UPIO_RM9000           (6)                     /* RM9000 type IO */
diff --git a/target/linux/ramips/patches-3.2/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.2/102-rt288x-pci-driver-hook.patch
new file mode 100644 (file)
index 0000000..1a2a430
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX)                += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
+                                       ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
++obj-$(CONFIG_SOC_RT288X)      += pci-rt288x.o
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.2/103-ethernet.patch b/target/linux/ramips/patches-3.2/103-ethernet.patch
new file mode 100644 (file)
index 0000000..8953f3b
--- /dev/null
@@ -0,0 +1,29 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -277,6 +277,16 @@ source "drivers/net/plip/Kconfig"
+ source "drivers/net/ppp/Kconfig"
++config MIPS_RAMIPS_NET
++      tristate "Ethernet driver for rt288x/rt305x"
++      depends on MIPS_RALINK
++      help
++        This driver supports the etehrnet mac inside the ralink wisocs
++
++config RAMIPS_ETH_DEBUG
++      bool "Enable debug messages in the Ralink ethernet driver"
++      depends on MIPS_RAMIPS_NET
++
+ source "drivers/net/slip/Kconfig"
+ source "drivers/s390/net/Kconfig"
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
+ obj-$(CONFIG_PPPOE) += ppp/
+ obj-$(CONFIG_PPPOL2TP) += ppp/
+ obj-$(CONFIG_PPTP) += ppp/
++obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
+ obj-$(CONFIG_SLIP) += slip/
+ obj-$(CONFIG_SLHC) += slip/
+ obj-$(CONFIG_NET_SB1000) += sb1000.o
diff --git a/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch
new file mode 100644 (file)
index 0000000..293044d
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1020,6 +1020,13 @@ config LANTIQ_WDT
+       help
+         Hardware driver for the Lantiq SoC Watchdog Timer.
++config RAMIPS_WDT
++      tristate "Ralink RT288X/RT305X Watchdog Timer"
++      depends on SOC_RT288X || SOC_RT305X
++      help
++        Hardware driver for the built-in watchdog timer on the
++        Ralink RT288X/RT305X SoCs.
++
+ # PARISC Architecture
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -131,6 +131,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
+ # PARISC Architecture
diff --git a/target/linux/ramips/patches-3.2/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.2/105-ramips-spi-driver.patch
new file mode 100644 (file)
index 0000000..1379481
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -289,6 +289,12 @@ config SPI_PXA2XX
+ config SPI_PXA2XX_PCI
+       def_bool SPI_PXA2XX && X86_32 && PCI
++config SPI_RAMIPS
++      tristate "Ralink RT288x/RT305x SPI Controller"
++      depends on (SOC_RT288X || SOC_RT305X) && SPI_MASTER
++      help
++        This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022)                      += spi-pl022.o
+ obj-$(CONFIG_SPI_PPC4xx)              += spi-ppc4xx.o
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RAMIPS)              += ramips_spi.o
+ obj-$(CONFIG_SPI_S3C24XX)             += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y                      := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ramips/patches-3.2/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.2/105-usb_dwc_otg.patch
new file mode 100644 (file)
index 0000000..22fd944
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -181,4 +181,6 @@ source "drivers/usb/gadget/Kconfig"
+ source "drivers/usb/otg/Kconfig"
++source "drivers/usb/dwc_otg/Kconfig"
++
+ endif # USB_SUPPORT
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -49,6 +49,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP)      += early
+ obj-$(CONFIG_USB_ATM)         += atm/
+ obj-$(CONFIG_USB_SPEEDTOUCH)  += atm/
++obj-$(CONFIG_DWC_OTG)         += dwc_otg/
++
+ obj-$(CONFIG_USB_MUSB_HDRC)   += musb/
+ obj-$(CONFIG_USB_RENESAS_USBHS)       += renesas_usbhs/
+ obj-$(CONFIG_USB_OTG_UTILS)   += otg/
diff --git a/target/linux/ramips/rt288x/config-3.2 b/target/linux/ramips/rt288x/config-3.2
new file mode 100644 (file)
index 0000000..6c9a7b0
--- /dev/null
@@ -0,0 +1,118 @@
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LANTIQ is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_MII is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+CONFIG_MIPS_RAMIPS_NET=y
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+CONFIG_RALINK_RT288X=y
+# CONFIG_RALINK_RT305X is not set
+# CONFIG_RAMIPS_ETH_DEBUG is not set
+CONFIG_RAMIPS_WDT=y
+CONFIG_RT288X_MACH_F5D8235_V1=y
+CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
+CONFIG_RT288X_MACH_WZR_AGL300NH=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT288X=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2
new file mode 100644 (file)
index 0000000..0bcafbf
--- /dev/null
@@ -0,0 +1,138 @@
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DWC_OTG is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LANTIQ is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MII is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+CONFIG_MIPS_RAMIPS_NET=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+# CONFIG_RALINK_RT288X is not set
+CONFIG_RALINK_RT305X=y
+# CONFIG_RAMIPS_ETH_DEBUG is not set
+CONFIG_RAMIPS_WDT=y
+CONFIG_RT305X_MACH_ALL0256N=y
+CONFIG_RT305X_MACH_ARGUS_ATP52B=y
+CONFIG_RT305X_MACH_BC2=y
+CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_ESR_9753=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
+CONFIG_RT305X_MACH_FONERA20N=y
+CONFIG_RT305X_MACH_HW550_3G=y
+CONFIG_RT305X_MACH_MOFI3500_3GN=y
+CONFIG_RT305X_MACH_NBG_419N=y
+CONFIG_RT305X_MACH_NW718=y
+CONFIG_RT305X_MACH_OMNI_EMB=y
+CONFIG_RT305X_MACH_PWH2004=y
+CONFIG_RT305X_MACH_RT_G32_REVB=y
+CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_W502U=y
+CONFIG_RT305X_MACH_WCR150GN=y
+CONFIG_RT305X_MACH_WHR_G300N=y
+CONFIG_RT305X_MACH_WL341V3=y
+CONFIG_RT305X_MACH_WL351=y
+CONFIG_RT305X_MACH_WR512_3GN=y
+CONFIG_RT305X_MACH_WR6202=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT305X=y
+CONFIG_SPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RAMIPS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0