--- /dev/null
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_AIO=y
+# CONFIG_AIRO is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCNET is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_AT24 is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_BR2684 is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BASE_FULL=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BCM43XX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BPQETHER is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CODA_FS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CONFIGFS_FS=y
+# CONFIG_CONNECTOR is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DECNET is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DEVKMEM is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_ECONET is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_GD is not set
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMQ is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_INET=y
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SET is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPI20 is not set
+# CONFIG_ISDN_CAPI_CAPIFS is not set
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYS is not set
+# CONFIG_KMOD is not set
+# CONFIG_KPROBES is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_LBD is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_LOCKD is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LSF is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MACVLAN is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_MAC_PARTITION=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MD is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINI_FO=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_TEST is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_UBI is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFTL is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_NAT is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+CONFIG_NL80211=y
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PID_NS is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PM is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPP is not set
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_SLAB=y
+CONFIG_SLABINFO=y
+# CONFIG_SLHC is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING is not set
+CONFIG_STANDALONE=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+CONFIG_TCP_CONG_VEGAS=y
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TR is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TUN is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_SIERRA is not set
+CONFIG_USB_STORAGE_USBAT=y
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WANXL is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_ZISOFS=y
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA=y
+CONFIG_ZONE_DMA_FLAG=1
--- /dev/null
+/*
+ * character device wrapper for generic gpio layer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
+ *
+ * Feedback, Bugs... blogic@openwrt.org
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/atomic.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_dev.h>
+
+#define DRVNAME "gpiodev"
+#define DEVNAME "gpio"
+
+static int dev_major;
+static unsigned int gpio_access_mask;
+static struct class *gpiodev_class;
+
+/* Counter is 1, if the device is not opened and zero (or less) if opened. */
+static atomic_t gpio_open_cnt = ATOMIC_INIT(1);
+
+static int
+gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+
+ if (((1 << arg) & gpio_access_mask) != (1 << arg))
+ {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ switch (cmd)
+ {
+ case GPIO_GET:
+ retval = gpio_get_value(arg);
+ break;
+
+ case GPIO_SET:
+ gpio_set_value(arg, 1);
+ break;
+
+ case GPIO_CLEAR:
+ gpio_set_value(arg, 0);
+ break;
+
+ case GPIO_DIR_IN:
+ gpio_direction_input(arg);
+ break;
+
+ case GPIO_DIR_OUT:
+ gpio_direction_output(arg, 0);
+ break;
+
+ default:
+ retval = -EINVAL;
+ break;
+ }
+
+out:
+ return retval;
+}
+
+static int
+gpio_open(struct inode *inode, struct file *file)
+{
+ int result = 0;
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ if (dev_minor != 0)
+ {
+ printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
+ result = -ENODEV;
+ goto out;
+ }
+
+ /* FIXME: We should really allow multiple applications to open the device
+ * at the same time, as long as the apps access different IO pins.
+ * The generic gpio-registration functions can be used for that.
+ * Two new IOCTLs have to be introduced for that. Need to check userspace
+ * compatibility first. --mb */
+ if (!atomic_dec_and_test(&gpio_open_cnt)) {
+ atomic_inc(&gpio_open_cnt);
+ printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor);
+ result = -EBUSY;
+ goto out;
+ }
+
+out:
+ return result;
+}
+
+static int
+gpio_close(struct inode * inode, struct file * file)
+{
+ smp_mb__before_atomic_inc();
+ atomic_inc(&gpio_open_cnt);
+
+ return 0;
+}
+
+struct file_operations gpio_fops = {
+ ioctl: gpio_ioctl,
+ open: gpio_open,
+ release: gpio_close
+};
+
+static int
+gpio_probe(struct platform_device *dev)
+{
+ int result = 0;
+
+ dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
+ if (!dev_major)
+ {
+ printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
+ result = -ENODEV;
+ goto out;
+ }
+
+ gpiodev_class = class_create(THIS_MODULE, DRVNAME);
+ device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME);
+
+ printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
+
+ if (dev->num_resources != 1)
+ {
+ printk(KERN_ERR DRVNAME ": device may only have 1 resource\n");
+ result = -ENODEV;
+ goto out;
+ }
+
+ gpio_access_mask = dev->resource[0].start;
+
+ printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask);
+out:
+ return result;
+}
+
+static int
+gpio_remove(struct platform_device *dev)
+{
+ unregister_chrdev(dev_major, DEVNAME);
+ return 0;
+}
+
+static struct
+platform_driver gpio_driver = {
+ .probe = gpio_probe,
+ .remove = gpio_remove,
+ .driver = {
+ .name = "GPIODEV",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init
+gpio_mod_init(void)
+{
+ int ret = platform_driver_register(&gpio_driver);
+ if (ret)
+ printk(KERN_INFO DRVNAME ": Error registering platfom driver!");
+
+ return ret;
+}
+
+static void __exit
+gpio_mod_exit(void)
+{
+ platform_driver_unregister(&gpio_driver);
+}
+
+module_init (gpio_mod_init);
+module_exit (gpio_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin / OpenWrt");
+MODULE_DESCRIPTION("Character device for for generic gpio api");
--- /dev/null
+/*
+ * Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This file was based on: /drivers/input/misc/cobalt_btns.c
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * also was based on: /drivers/input/keyboard/gpio_keys.c
+ * Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio_buttons.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME "gpio-buttons"
+#define DRV_VERSION "0.1.1"
+#define PFX DRV_NAME ": "
+
+struct gpio_buttons_dev {
+ struct input_polled_dev *poll_dev;
+ struct gpio_buttons_platform_data *pdata;
+};
+
+static void gpio_buttons_poll(struct input_polled_dev *dev)
+{
+ struct gpio_buttons_dev *bdev = dev->private;
+ struct gpio_buttons_platform_data *pdata = bdev->pdata;
+ struct input_dev *input = dev->input;
+ int i;
+
+ for (i = 0; i < bdev->pdata->nbuttons; i++) {
+ struct gpio_button *button = &pdata->buttons[i];
+ unsigned int type = button->type ?: EV_KEY;
+ int state;
+
+ state = gpio_get_value(button->gpio) ? 1 : 0;
+ state ^= button->active_low;
+
+ if (state) {
+ button->count++;
+ } else {
+ if (button->count >= button->threshold) {
+ input_event(input, type, button->code, 1);
+ input_sync(input);
+ }
+ button->count = 0;
+ }
+
+ if (button->count == button->threshold) {
+ input_event(input, type, button->code, 0);
+ input_sync(input);
+ }
+ }
+}
+
+static int __devinit gpio_buttons_probe(struct platform_device *pdev)
+{
+ struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
+ struct gpio_buttons_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error, i;
+
+
+ if (!pdata)
+ return -ENXIO;
+
+ bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
+ if (!bdev) {
+ printk(KERN_ERR DRV_NAME "no memory for device\n");
+ return -ENOMEM;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ printk(KERN_ERR DRV_NAME "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_bdev;
+ }
+
+ poll_dev->private = bdev;
+ poll_dev->poll = gpio_buttons_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+
+ input = poll_dev->input;
+
+ input->evbit[0] = BIT(EV_KEY);
+ input->name = pdev->name;
+ input->phys = "gpio-buttons/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_button *button = &pdata->buttons[i];
+ unsigned int gpio = button->gpio;
+ unsigned int type = button->type ?: EV_KEY;
+
+ error = gpio_request(gpio, button->desc ?
+ button->desc : DRV_NAME);
+ if (error) {
+ printk(KERN_ERR PFX "unable to claim gpio %u, "
+ "error %d\n", gpio, error);
+ goto err_free_gpio;
+ }
+
+ error = gpio_direction_input(gpio);
+ if (error) {
+ printk(KERN_ERR PFX "unable to set direction on "
+ "gpio %u, error %d\n", gpio, error);
+ goto err_free_gpio;
+ }
+
+ input_set_capability(input, type, button->code);
+ button->count = 0;
+ }
+
+ bdev->poll_dev = poll_dev;
+ bdev->pdata = pdata;
+ platform_set_drvdata(pdev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ printk(KERN_ERR PFX "unable to register polled device, "
+ "error %d\n", error);
+ goto err_free_gpio;
+ }
+
+ return 0;
+
+err_free_gpio:
+ for (i = i - 1; i >= 0; i--)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(poll_dev);
+
+err_free_bdev:
+ kfree(bdev);
+
+ platform_set_drvdata(pdev, NULL);
+ return error;
+}
+
+static int __devexit gpio_buttons_remove(struct platform_device *pdev)
+{
+ struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
+ struct gpio_buttons_platform_data *pdata = bdev->pdata;
+ int i;
+
+ input_unregister_polled_device(bdev->poll_dev);
+
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(bdev->poll_dev);
+
+ kfree(bdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gpio_buttons_driver = {
+ .probe = gpio_buttons_probe,
+ .remove = __devexit_p(gpio_buttons_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_buttons_init(void)
+{
+ printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
+ return platform_driver_register(&gpio_buttons_driver);
+}
+
+static void __exit gpio_buttons_exit(void)
+{
+ platform_driver_unregister(&gpio_buttons_driver);
+}
+
+module_init(gpio_buttons_init);
+module_exit(gpio_buttons_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
+
--- /dev/null
+/*
+ * LEDs driver for PCEngines ALIX 2/3 series
+ *
+ * Copyright (C) 2007 Petr Liebman
+ *
+ * Based on leds-wrap.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+#define DRVNAME "alix-led"
+
+#define ALIX_LED1_PORT (0x6100)
+#define ALIX_LED1_ON (1<<22)
+#define ALIX_LED1_OFF (1<<6)
+
+#define ALIX_LED2_PORT (0x6180)
+#define ALIX_LED2_ON (1<<25)
+#define ALIX_LED2_OFF (1<<9)
+
+#define ALIX_LED3_PORT (0x6180)
+#define ALIX_LED3_ON (1<<27)
+#define ALIX_LED3_OFF (1<<11)
+
+
+static struct platform_device *pdev;
+
+static void alix_led_set_1(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ outl(ALIX_LED1_ON, ALIX_LED1_PORT);
+ else
+ outl(ALIX_LED1_OFF, ALIX_LED1_PORT);
+}
+
+static void alix_led_set_2(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ outl(ALIX_LED2_ON, ALIX_LED2_PORT);
+ else
+ outl(ALIX_LED2_OFF, ALIX_LED2_PORT);
+}
+
+static void alix_led_set_3(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ outl(ALIX_LED3_ON, ALIX_LED3_PORT);
+ else
+ outl(ALIX_LED3_OFF, ALIX_LED3_PORT);
+}
+
+static struct led_classdev alix_led_1 = {
+ .name = "alix:1",
+ .brightness_set = alix_led_set_1,
+};
+
+static struct led_classdev alix_led_2 = {
+ .name = "alix:2",
+ .brightness_set = alix_led_set_2,
+};
+
+static struct led_classdev alix_led_3 = {
+ .name = "alix:3",
+ .brightness_set = alix_led_set_3,
+};
+
+
+#ifdef CONFIG_PM
+static int alix_led_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ led_classdev_suspend(&alix_led_1);
+ led_classdev_suspend(&alix_led_2);
+ led_classdev_suspend(&alix_led_3);
+ return 0;
+}
+
+static int alix_led_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&alix_led_1);
+ led_classdev_resume(&alix_led_2);
+ led_classdev_resume(&alix_led_3);
+ return 0;
+}
+#else
+#define alix_led_suspend NULL
+#define alix_led_resume NULL
+#endif
+
+static int alix_led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &alix_led_1);
+ if (ret >= 0)
+ {
+ ret = led_classdev_register(&pdev->dev, &alix_led_2);
+ if (ret >= 0)
+ {
+ ret = led_classdev_register(&pdev->dev, &alix_led_3);
+ if (ret < 0)
+ led_classdev_unregister(&alix_led_2);
+ }
+ if (ret < 0)
+ led_classdev_unregister(&alix_led_1);
+ }
+ return ret;
+}
+
+static int alix_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&alix_led_1);
+ led_classdev_unregister(&alix_led_2);
+ led_classdev_unregister(&alix_led_3);
+ return 0;
+}
+
+static struct platform_driver alix_led_driver = {
+ .probe = alix_led_probe,
+ .remove = alix_led_remove,
+ .suspend = alix_led_suspend,
+ .resume = alix_led_resume,
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init alix_led_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&alix_led_driver);
+ if (ret < 0)
+ goto out;
+
+ pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&alix_led_driver);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit alix_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&alix_led_driver);
+}
+
+module_init(alix_led_init);
+module_exit(alix_led_exit);
+
+MODULE_AUTHOR("Petr Liebman");
+MODULE_DESCRIPTION("PCEngines ALIX LED driver");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ * LED Morse Trigger
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This file was based on: drivers/led/ledtrig-timer.c
+ * Copyright 2005-2006 Openedhand Ltd.
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * also based on the patch '[PATCH] 2.5.59 morse code panics' posted
+ * in the LKML by Tomas Szepe at Thu, 30 Jan 2003
+ * Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
+ * Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+
+#include "leds.h"
+
+#define MORSE_DELAY_BASE (HZ/2)
+
+#define MORSE_STATE_BLINK_START 0
+#define MORSE_STATE_BLINK_STOP 1
+
+#define MORSE_DIT_LEN 1
+#define MORSE_DAH_LEN 3
+#define MORSE_SPACE_LEN 7
+
+struct morse_trig_data {
+ unsigned long delay;
+ char *msg;
+
+ unsigned char morse;
+ unsigned char state;
+ char *msgpos;
+ struct timer_list timer;
+};
+
+const unsigned char morsetable[] = {
+ 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */
+ 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */
+ 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */
+ 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */
+ 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */
+ 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */
+ 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */
+ 0, 0, 0, 0, 0154 /* [\]^_ */
+};
+
+static inline unsigned char tomorse(char c) {
+ if (c >= 'a' && c <= 'z')
+ c = c - 'a' + 'A';
+ if (c >= '"' && c <= '_') {
+ return morsetable[c - '"'];
+ } else
+ return 0;
+}
+
+static inline unsigned long dit_len(struct morse_trig_data *morse_data)
+{
+ return MORSE_DIT_LEN*morse_data->delay;
+}
+
+static inline unsigned long dah_len(struct morse_trig_data *morse_data)
+{
+ return MORSE_DAH_LEN*morse_data->delay;
+}
+
+static inline unsigned long space_len(struct morse_trig_data *morse_data)
+{
+ return MORSE_SPACE_LEN*morse_data->delay;
+}
+
+static void morse_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (struct led_classdev *)data;
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+ unsigned long brightness = LED_OFF;
+ unsigned long delay = 0;
+
+ if (!morse_data->msg)
+ goto set_led;
+
+ switch (morse_data->state) {
+ case MORSE_STATE_BLINK_START:
+ /* Starting a new blink. We have a valid code in morse. */
+ delay = (morse_data->morse & 001) ? dah_len(morse_data):
+ dit_len(morse_data);
+ brightness = LED_FULL;
+ morse_data->state = MORSE_STATE_BLINK_STOP;
+ morse_data->morse >>= 1;
+ break;
+ case MORSE_STATE_BLINK_STOP:
+ /* Coming off of a blink. */
+ morse_data->state = MORSE_STATE_BLINK_START;
+
+ if (morse_data->morse > 1) {
+ /* Not done yet, just a one-dit pause. */
+ delay = dit_len(morse_data);
+ break;
+ }
+
+ /* Get a new char, figure out how much space. */
+ /* First time through */
+ if (!morse_data->msgpos)
+ morse_data->msgpos = (char *)morse_data->msg;
+
+ if (!*morse_data->msgpos) {
+ /* Repeating */
+ morse_data->msgpos = (char *)morse_data->msg;
+ delay = space_len(morse_data);
+ } else {
+ /* Inter-letter space */
+ delay = dah_len(morse_data);
+ }
+
+ if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
+ delay = space_len(morse_data);
+ /* And get us back here */
+ morse_data->state = MORSE_STATE_BLINK_STOP;
+ }
+ morse_data->msgpos++;
+ break;
+ }
+
+ mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
+
+set_led:
+ led_set_brightness(led_cdev, brightness);
+}
+
+static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
+{
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+ sprintf(buf, "%lu\n", morse_data->delay);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
+ const char *buf, size_t size)
+{
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+ size_t count = after - buf;
+ int ret = -EINVAL;
+
+ if (*after && isspace(*after))
+ count++;
+
+ if (count == size) {
+ morse_data->delay = state;
+ mod_timer(&morse_data->timer, jiffies + 1);
+ ret = count;
+ }
+
+ return ret;
+}
+
+static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
+{
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+ if (!morse_data->msg)
+ sprintf(buf, "<none>\n");
+ else
+ sprintf(buf, "%s\n", morse_data->msg);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
+ const char *buf, size_t size)
+{
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+ char *m;
+
+ m = kmalloc(size, GFP_KERNEL);
+ if (!m)
+ return -ENOMEM;
+
+ memcpy(m,buf,size);
+ m[size]='\0';
+
+ if (morse_data->msg)
+ kfree(morse_data->msg);
+
+ morse_data->msg = m;
+ morse_data->msgpos = NULL;
+ morse_data->state = MORSE_STATE_BLINK_STOP;
+
+ mod_timer(&morse_data->timer, jiffies + 1);
+
+ return size;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
+static ssize_t morse_delay_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return _morse_msg_store(led_cdev, buf, size);
+}
+
+static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+ device_create_file(leddev->dev, &dev_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+ device_remove_file(leddev->dev, &dev_attr_ ## attr)
+
+#else
+static ssize_t morse_delay_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+
+ return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+
+ return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+
+ return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+
+ return _morse_msg_store(led_cdev, buf, size);
+}
+
+static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+ class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+ class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
+
+#endif
+
+static void morse_trig_activate(struct led_classdev *led_cdev)
+{
+ struct morse_trig_data *morse_data;
+ int rc;
+
+ morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
+ if (!morse_data)
+ return;
+
+ morse_data->delay = MORSE_DELAY_BASE;
+ init_timer(&morse_data->timer);
+ morse_data->timer.function = morse_timer_function;
+ morse_data->timer.data = (unsigned long)led_cdev;
+
+ rc = led_device_create_file(led_cdev, delay);
+ if (rc) goto err;
+
+ rc = led_device_create_file(led_cdev, message);
+ if (rc) goto err_delay;
+
+ led_cdev->trigger_data = morse_data;
+
+ return;
+
+err_delay:
+ led_device_remove_file(led_cdev, delay);
+err:
+ kfree(morse_data);
+}
+
+static void morse_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+ if (!morse_data)
+ return;
+
+ led_device_remove_file(led_cdev, message);
+ led_device_remove_file(led_cdev, delay);
+
+ del_timer_sync(&morse_data->timer);
+ if (morse_data->msg)
+ kfree(morse_data->msg);
+
+ kfree(morse_data);
+}
+
+static struct led_trigger morse_led_trigger = {
+ .name = "morse",
+ .activate = morse_trig_activate,
+ .deactivate = morse_trig_deactivate,
+};
+
+static int __init morse_trig_init(void)
+{
+ return led_trigger_register(&morse_led_trigger);
+}
+
+static void __exit morse_trig_exit(void)
+{
+ led_trigger_unregister(&morse_led_trigger);
+}
+
+module_init(morse_trig_init);
+module_exit(morse_trig_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION("Morse LED trigger");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * LED Kernel Netdev Trigger
+ *
+ * Toggles the LED to reflect the link and traffic state of a named net device
+ *
+ * Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+ *
+ * Derived from ledtrig-timer.c which is:
+ * Copyright 2005-2006 Openedhand Ltd.
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+#include <net/net_namespace.h>
+#endif
+
+#include "leds.h"
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ *
+ * interval - duration of LED blink, in milliseconds
+ *
+ * mode - either "none" (LED is off) or a space separated list of one or more of:
+ * link: LED's normal state reflects whether the link is up (has carrier) or not
+ * tx: LED blinks on transmitted data
+ * rx: LED blinks on receive data
+ *
+ * Some suggestions:
+ *
+ * Simple link status LED:
+ * $ echo netdev >someled/trigger
+ * $ echo eth0 >someled/device_name
+ * $ echo link >someled/mode
+ *
+ * Ethernet-style link/activity LED:
+ * $ echo netdev >someled/trigger
+ * $ echo eth0 >someled/device_name
+ * $ echo "link tx rx" >someled/mode
+ *
+ * Modem-style tx/rx LEDs:
+ * $ echo netdev >led1/trigger
+ * $ echo ppp0 >led1/device_name
+ * $ echo tx >led1/mode
+ * $ echo netdev >led2/trigger
+ * $ echo ppp0 >led2/device_name
+ * $ echo rx >led2/mode
+ *
+ */
+
+#define MODE_LINK 1
+#define MODE_TX 2
+#define MODE_RX 4
+
+struct led_netdev_data {
+ rwlock_t lock;
+
+ struct timer_list timer;
+ struct notifier_block notifier;
+
+ struct led_classdev *led_cdev;
+ struct net_device *net_dev;
+
+ char device_name[IFNAMSIZ];
+ unsigned interval;
+ unsigned mode;
+ unsigned link_up;
+ unsigned last_activity;
+};
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{
+ if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
+ led_set_brightness(trigger_data->led_cdev, LED_FULL);
+ else
+ led_set_brightness(trigger_data->led_cdev, LED_OFF);
+
+ if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
+ mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+ else
+ del_timer(&trigger_data->timer);
+}
+
+static ssize_t led_device_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+ read_lock(&trigger_data->lock);
+ sprintf(buf, "%s\n", trigger_data->device_name);
+ read_unlock(&trigger_data->lock);
+
+ return strlen(buf) + 1;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
+extern struct net init_net;
+#endif
+
+static ssize_t led_device_name_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+ if (size < 0 || size >= IFNAMSIZ)
+ return -EINVAL;
+
+ write_lock(&trigger_data->lock);
+
+ strcpy(trigger_data->device_name, buf);
+ if (size > 0 && trigger_data->device_name[size-1] == '\n')
+ trigger_data->device_name[size-1] = 0;
+
+ if (trigger_data->device_name[0] != 0) {
+ /* check for existing device to update from */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+ trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name);
+#else
+ trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
+#endif
+ if (trigger_data->net_dev != NULL)
+ trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
+ set_baseline_state(trigger_data); /* updates LEDs, may start timers */
+ }
+
+ write_unlock(&trigger_data->lock);
+ return size;
+}
+
+static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
+
+static ssize_t led_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+ read_lock(&trigger_data->lock);
+
+ if (trigger_data->mode == 0) {
+ strcpy(buf, "none\n");
+ } else {
+ if (trigger_data->mode & MODE_LINK)
+ strcat(buf, "link ");
+ if (trigger_data->mode & MODE_TX)
+ strcat(buf, "tx ");
+ if (trigger_data->mode & MODE_RX)
+ strcat(buf, "rx ");
+ strcat(buf, "\n");
+ }
+
+ read_unlock(&trigger_data->lock);
+
+ return strlen(buf)+1;
+}
+
+static ssize_t led_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+ char copybuf[1024];
+ int new_mode = -1;
+ char *p, *token;
+
+ /* take a copy since we don't want to trash the inbound buffer when using strsep */
+ strncpy(copybuf, buf, sizeof(copybuf));
+ copybuf[1023] = 0;
+ p = copybuf;
+
+ while ((token = strsep(&p, " \t\n")) != NULL) {
+ if (!*token)
+ continue;
+
+ if (new_mode == -1)
+ new_mode = 0;
+
+ if (!strcmp(token, "none"))
+ new_mode = 0;
+ else if (!strcmp(token, "tx"))
+ new_mode |= MODE_TX;
+ else if (!strcmp(token, "rx"))
+ new_mode |= MODE_RX;
+ else if (!strcmp(token, "link"))
+ new_mode |= MODE_LINK;
+ else
+ return -EINVAL;
+ }
+
+ if (new_mode == -1)
+ return -EINVAL;
+
+ write_lock(&trigger_data->lock);
+ trigger_data->mode = new_mode;
+ set_baseline_state(trigger_data);
+ write_unlock(&trigger_data->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
+
+static ssize_t led_interval_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+ read_lock(&trigger_data->lock);
+ sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
+ read_unlock(&trigger_data->lock);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t led_interval_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+ int ret = -EINVAL;
+ char *after;
+ unsigned long value = simple_strtoul(buf, &after, 10);
+ size_t count = after - buf;
+
+ if (*after && isspace(*after))
+ count++;
+
+ /* impose some basic bounds on the timer interval */
+ if (count == size && value >= 5 && value <= 10000) {
+ write_lock(&trigger_data->lock);
+ trigger_data->interval = msecs_to_jiffies(value);
+ set_baseline_state(trigger_data); // resets timer
+ write_unlock(&trigger_data->lock);
+ ret = count;
+ }
+
+ return ret;
+}
+
+static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
+
+static int netdev_trig_notify(struct notifier_block *nb,
+ unsigned long evt,
+ void *dv)
+{
+ struct net_device *dev = dv;
+ struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
+
+ if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
+ return NOTIFY_DONE;
+
+ write_lock(&trigger_data->lock);
+
+ if (strcmp(dev->name, trigger_data->device_name))
+ goto done;
+
+ if (evt == NETDEV_REGISTER) {
+ if (trigger_data->net_dev != NULL)
+ dev_put(trigger_data->net_dev);
+ dev_hold(dev);
+ trigger_data->net_dev = dev;
+ trigger_data->link_up = 0;
+ goto done;
+ }
+
+ if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
+ dev_put(trigger_data->net_dev);
+ trigger_data->net_dev = NULL;
+ goto done;
+ }
+
+ /* UP / DOWN / CHANGE */
+
+ trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
+ set_baseline_state(trigger_data);
+
+done:
+ write_unlock(&trigger_data->lock);
+ return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_timer(unsigned long arg)
+{
+ struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+ struct net_device_stats *dev_stats;
+ unsigned new_activity;
+
+ write_lock(&trigger_data->lock);
+
+ if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
+ /* we don't need to do timer work, just reflect link state. */
+ led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
+ goto no_restart;
+ }
+
+ dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev);
+ new_activity =
+ ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+ ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
+
+ if (trigger_data->mode & MODE_LINK) {
+ /* base state is ON (link present) */
+ /* if there's no link, we don't get this far and the LED is off */
+
+ /* OFF -> ON always */
+ /* ON -> OFF on activity */
+ if (trigger_data->led_cdev->brightness == LED_OFF) {
+ led_set_brightness(trigger_data->led_cdev, LED_FULL);
+ } else if (trigger_data->last_activity != new_activity) {
+ led_set_brightness(trigger_data->led_cdev, LED_OFF);
+ }
+ } else {
+ /* base state is OFF */
+ /* ON -> OFF always */
+ /* OFF -> ON on activity */
+ if (trigger_data->led_cdev->brightness == LED_FULL) {
+ led_set_brightness(trigger_data->led_cdev, LED_OFF);
+ } else if (trigger_data->last_activity != new_activity) {
+ led_set_brightness(trigger_data->led_cdev, LED_FULL);
+ }
+ }
+
+ trigger_data->last_activity = new_activity;
+ mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+
+no_restart:
+ write_unlock(&trigger_data->lock);
+}
+
+static void netdev_trig_activate(struct led_classdev *led_cdev)
+{
+ struct led_netdev_data *trigger_data;
+ int rc;
+
+ trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
+ if (!trigger_data)
+ return;
+
+ rwlock_init(&trigger_data->lock);
+
+ trigger_data->notifier.notifier_call = netdev_trig_notify;
+ trigger_data->notifier.priority = 10;
+
+ setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
+
+ trigger_data->led_cdev = led_cdev;
+ trigger_data->net_dev = NULL;
+ trigger_data->device_name[0] = 0;
+
+ trigger_data->mode = 0;
+ trigger_data->interval = msecs_to_jiffies(50);
+ trigger_data->link_up = 0;
+ trigger_data->last_activity = 0;
+
+ led_cdev->trigger_data = trigger_data;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
+ if (rc)
+ goto err_out;
+ rc = device_create_file(led_cdev->dev, &dev_attr_mode);
+ if (rc)
+ goto err_out_device_name;
+ rc = device_create_file(led_cdev->dev, &dev_attr_interval);
+ if (rc)
+ goto err_out_mode;
+
+ register_netdevice_notifier(&trigger_data->notifier);
+ return;
+
+err_out_mode:
+ device_remove_file(led_cdev->dev, &dev_attr_mode);
+err_out_device_name:
+ device_remove_file(led_cdev->dev, &dev_attr_device_name);
+err_out:
+ led_cdev->trigger_data = NULL;
+ kfree(trigger_data);
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+ if (trigger_data) {
+ unregister_netdevice_notifier(&trigger_data->notifier);
+
+ device_remove_file(led_cdev->dev, &dev_attr_device_name);
+ device_remove_file(led_cdev->dev, &dev_attr_mode);
+ device_remove_file(led_cdev->dev, &dev_attr_interval);
+
+ write_lock(&trigger_data->lock);
+
+ if (trigger_data->net_dev) {
+ dev_put(trigger_data->net_dev);
+ trigger_data->net_dev = NULL;
+ }
+
+ write_unlock(&trigger_data->lock);
+
+ del_timer_sync(&trigger_data->timer);
+
+ kfree(trigger_data);
+ }
+}
+
+static struct led_trigger netdev_led_trigger = {
+ .name = "netdev",
+ .activate = netdev_trig_activate,
+ .deactivate = netdev_trig_deactivate,
+};
+
+static int __init netdev_trig_init(void)
+{
+ return led_trigger_register(&netdev_led_trigger);
+}
+
+static void __exit netdev_trig_exit(void)
+{
+ led_trigger_unregister(&netdev_led_trigger);
+}
+
+module_init(netdev_trig_init);
+module_exit(netdev_trig_exit);
+
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Definitions for the GPIO buttons interface driver
+ *
+ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This file was based on: /include/linux/gpio_keys.h
+ * The original gpio_keys.h seems not to have a license.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+ int gpio; /* GPIO line number */
+ int active_low;
+ char *desc; /* button description */
+ int type; /* input event type (EV_KEY, EV_SW) */
+ int code; /* input event code (KEY_*, SW_*) */
+ int count;
+ int threshold; /* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+ struct gpio_button *buttons;
+ int nbuttons; /* number of buttons */
+ int poll_interval; /* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
+
--- /dev/null
+#ifndef _GPIODEV_H__
+#define _GPIODEV_H__
+
+#define IOC_GPIODEV_MAGIC 'B'
+#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14)
+
+#endif
--- /dev/null
+--- a/Makefile
++++ b/Makefile
+@@ -560,6 +560,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS += $(NOSTDINC_FLAGS)
+
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
--- /dev/null
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -187,7 +187,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+ if something tries to do an invalid xchg(). */
+ extern void __xchg_called_with_bad_pointer(void);
+
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ switch (size) {
+ case 4:
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -51,6 +51,7 @@
+ #define SST49LF040B 0x0050
+ #define SST49LF008A 0x005a
+ #define AT49BV6416 0x00d6
++#define MANUFACTURER_SAMSUNG 0x00ec
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -375,12 +376,19 @@ struct mtd_info *cfi_cmdset_0002(struct
+
+ if (extp->MajorVersion != '1' ||
+ (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+- printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
+- "version %c.%c.\n", extp->MajorVersion,
+- extp->MinorVersion);
+- kfree(extp);
+- kfree(mtd);
+- return NULL;
++ if (cfi->mfr == MANUFACTURER_SAMSUNG &&
++ (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
++ printk(KERN_NOTICE " Newer Samsung flash detected, "
++ "should be compatibile with Amd/Fujitsu.\n");
++ }
++ else {
++ printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
++ "version %c.%c.\n", extp->MajorVersion,
++ extp->MinorVersion);
++ kfree(extp);
++ kfree(mtd);
++ return NULL;
++ }
+ }
+
+ /* Install our own private info structure */
--- /dev/null
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ .endm
+
++ j kernel_entry
++ nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ /*
+ * Reserved space for exception handlers.
--- /dev/null
+--- /dev/null
++++ b/include/asm-mips/mips_machine.h
+@@ -0,0 +1,47 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#define MIPS_MACHINE_NAME_LEN 64
++
++struct mips_machine {
++ unsigned long mach_type;
++ void (*mach_setup)(void);
++ unsigned char mach_name[MIPS_MACHINE_NAME_LEN];
++ struct list_head list;
++};
++
++void mips_machine_register(struct mips_machine *) __init;
++void mips_machine_setup(unsigned long machtype) __init;
++
++extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN];
++
++#define MIPS_MACHINE(_type, _name, _setup) \
++static struct mips_machine machine_##_type __initdata = \
++{ \
++ .mach_type = _type, \
++ .mach_name = _name, \
++ .mach_setup = _setup, \
++}; \
++ \
++static int __init register_machine_##_type(void) \
++{ \
++ mips_machine_register(&machine_##_type); \
++ return 0; \
++} \
++ \
++pure_initcall(register_machine_##_type)
++
++#endif /* __ASM_MIPS_MACHINE_H */
++
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <asm/mips_machine.h>
++#include <asm/bootinfo.h>
++
++static struct list_head mips_machines __initdata =
++ LIST_HEAD_INIT(mips_machines);
++
++unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown";
++
++static struct mips_machine * __init mips_machine_find(unsigned long machtype)
++{
++ struct list_head *this;
++
++ list_for_each(this, &mips_machines) {
++ struct mips_machine *mach;
++
++ mach = list_entry(this, struct mips_machine, list);
++ if (mach->mach_type == machtype)
++ return mach;
++ }
++
++ return NULL;
++}
++
++void __init mips_machine_register(struct mips_machine *mach)
++{
++ list_add_tail(&mach->list, &mips_machines);
++}
++
++void __init mips_machine_setup(unsigned long machtype)
++{
++ struct mips_machine *mach;
++
++ mach = mips_machine_find(machtype);
++ if (!mach) {
++ printk(KERN_ALERT "MIPS: no machine registered for "
++ "machtype %lu\n", machtype);
++ return;
++ }
++
++ if (mach->mach_name[0])
++ strncpy(mips_machine_name, mach->mach_name,
++ MIPS_MACHINE_NAME_LEN);
++
++ printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
++
++ if (mach->mach_setup)
++ mach->mach_setup();
++}
++
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -85,6 +85,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
+
+ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
+
+ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -810,6 +810,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ bool
+
++config MIPS_MACHINE
++ def_bool n
++
+ config NO_IOPORT
+ def_bool n
+
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -14,6 +14,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+
+ unsigned int vced_count, vcei_count;
+
+@@ -33,8 +34,12 @@ static int show_cpuinfo(struct seq_file
+ /*
+ * For the first processor also print the system type
+ */
+- if (n == 0)
++ if (n == 0) {
+ seq_printf(m, "system type\t\t: %s\n", get_system_type());
++#ifdef CONFIG_MIPS_MACHINE
++ seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
++#endif
++ }
+
+ seq_printf(m, "processor\t\t: %ld\n", n);
+ sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -812,6 +812,9 @@ config SYNC_R4K
+
+ config MIPS_MACHINE
+ def_bool n
++
++config PROM_EMU
++ def_bool n
+
+ config NO_IOPORT
+ def_bool n
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,15 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++#ifdef CONFIG_PROM_EMU
++EXPORT(prom_emu_argv)
++ .word 0
++ .word prom_emu_cmdline
++ .ascii "CMDLINE:"
++EXPORT(prom_emu_cmdline)
++ .fill 0x400
++#endif
++
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
+@@ -183,6 +192,19 @@ NESTED(kernel_entry, 16, sp) # kernel
+ LONG_S zero, (t0)
+ bne t0, t1, 1b
+
++#ifdef CONFIG_PROM_EMU
++ PTR_LA t0, prom_emu_cmdline
++ LONG_L t1, 0(t0)
++ beqz t1, 1f
++
++ li a0, 2
++ PTR_LA a1, prom_emu_argv
++ move a2, zero
++ move a3, zero
++
++1:
++#endif /* CONFIG_PROM_EMU */
++
+ LONG_S a0, fw_arg0 # firmware arguments
+ LONG_S a1, fw_arg1
+ LONG_S a2, fw_arg2
--- /dev/null
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
+
+
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ struct block_device *bdev;
+ struct block2mtd_dev *dev;
++ struct mtd_partition *part;
+ char *name;
+
+ if (!devname)
+@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
+
+ mutex_init(&dev->write_mutex);
+
+- /* Setup the MTD structure */
+- /* make the name contain the block device in */
+- name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+- GFP_KERNEL);
++ if (!mtdname)
++ mtdname = devname;
++
++ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ if (!name)
+ goto devinit_err;
+
+- sprintf(name, "block2mtd: %s", devname);
++ strcpy(name, mtdname);
+ dev->mtd.name = name;
+
+- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ dev->mtd.erasesize = erase_size;
+ dev->mtd.writesize = 1;
+ dev->mtd.type = MTD_RAM;
+@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
+ dev->mtd.priv = dev;
+ dev->mtd.owner = THIS_MODULE;
+
+- if (add_mtd_device(&dev->mtd)) {
++ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++ part->name = dev->mtd.name;
++ part->offset = 0;
++ part->size = dev->mtd.size;
++ if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ /* Device didnt get added, so free the entry */
+ goto devinit_err;
+ }
+ list_add(&dev->list, &blkmtd_device_list);
+ INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+- dev->mtd.name + strlen("block2mtd: "),
+- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ return dev;
+
+ devinit_err:
+@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
+
+ static int block2mtd_setup2(const char *val)
+ {
+- char buf[80 + 12]; /* 80 for device, 12 for erase size */
++ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ char *str = buf;
+- char *token[2];
++ char *token[3];
+ char *name;
+ size_t erase_size = PAGE_SIZE;
+ int i, ret;
+@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
+ strcpy(str, val);
+ kill_final_newline(str);
+
+- for (i = 0; i < 2; i++)
++ for (i = 0; i < 3; i++)
+ token[i] = strsep(&str, ",");
+
+ if (str)
+@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
+ parse_err("illegal erase size");
+ }
+ }
++ if (token[2] && (strlen(token[2]) + 1 > 80))
++ parse_err("mtd device name too long");
+
+- add_device(name, erase_size);
++ add_device(name, erase_size, token[2]);
+
+ return 0;
+ }
+@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
+
+
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+
+ static int __init block2mtd_init(void)
+ {
-diff -ruN linux-2.6.29-rc3.orig/drivers/mtd/devices/block2mtd.c linux-2.6.29-rc3/drivers/mtd/devices/block2mtd.c
---- linux-2.6.29-rc3.orig/drivers/mtd/devices/block2mtd.c 2009-03-09 05:13:51.000000000 +0100
-+++ linux-2.6.29-rc3/drivers/mtd/devices/block2mtd.c 2009-03-09 18:18:49.000000000 +0100
-@@ -28,6 +28,8 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_TESTS
+ should normally be compiled as kernel modules. The modules perform
+ various checks and verifications when loaded.
+
++config MTD_ROOTFS_ROOT_DEV
++ bool "Automatically set 'rootfs' partition to be root filesystem"
++ depends on MTD_PARTITIONS
++ default y
++
++config MTD_ROOTFS_SPLIT
++ bool "Automatically split 'rootfs' partition for squashfs"
++ depends on MTD_PARTITIONS
++ default y
++
+ config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -37,7 +39,7 @@ struct mtd_part {
+ * the pointer to that structure with this macro.
+ */
+ #define PART(x) ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+
+ /*
+ * MTD methods which simply translate the effective address and pass through
+@@ -489,6 +491,156 @@ out_register:
+ return slave;
+ }
+
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++ __le32 s_magic;
++ __le32 pad0[9];
++ __le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++ char buf[512];
++ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
++ int len, ret;
++
++ ret = master->read(master, offset, sizeof(*sb), &len, buf);
++ if (ret || (len != sizeof(*sb))) {
++ printk(KERN_ALERT "split_squashfs: error occured while reading "
++ "from \"%s\"\n", master->name);
++ return -EINVAL;
++ }
++
++ if (*((u32 *) buf) != SQUASHFS_MAGIC) {
++ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++ master->name);
++ *split_offset = 0;
++ return 0;
++ }
++
++ if (sb->bytes_used <= 0) {
++ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++ master->name);
++ *split_offset = 0;
++ return 0;
++ }
++
++ len = (u32) sb->bytes_used;
++ len += (offset & 0x000fffff);
++ len += (master->erasesize - 1);
++ len &= ~(master->erasesize - 1);
++ len -= (offset & 0x000fffff);
++ *split_offset = offset + len;
++
++ return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part,
++ int index)
++{
++ struct mtd_partition *dpart;
++ struct mtd_part *slave = NULL;
++ int split_offset = 0;
++ int ret;
++
++ ret = split_squashfs(master, part->offset, &split_offset);
++ if (ret)
++ return ret;
++
++ if (split_offset <= 0)
++ return 0;
++
++ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++ if (dpart == NULL) {
++ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++ ROOTFS_SPLIT_NAME);
++ return -ENOMEM;
++ }
++
++ memcpy(dpart, part, sizeof(*part));
++ dpart->name = (unsigned char *)&dpart[1];
++ strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++ dpart->size -= split_offset - dpart->offset;
++ dpart->offset = split_offset;
++
++ if (dpart == NULL)
++ return 1;
++
++ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++ slave = add_one_partition(master, dpart, index, split_offset);
++ if (!slave) {
++ kfree(dpart);
++ return -ENOMEM;
++ }
++ rpart->split = &slave->mtd;
++
++ return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++ struct mtd_partition tpart;
++ struct mtd_part *part;
++ char *name;
++ int index = 0;
++ int offset, size;
++ int ret;
++
++ part = PART(mtd);
++
++ /* check for the new squashfs offset first */
++ ret = split_squashfs(part->master, part->offset, &offset);
++ if (ret)
++ return ret;
++
++ if ((offset > 0) && !mtd->split) {
++ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++ /* if we don't have a rootfs split partition, create a new one */
++ tpart.name = (char *) mtd->name;
++ tpart.size = mtd->size;
++ tpart.offset = part->offset;
++
++ /* find the index of the last partition */
++ if (!list_empty(&mtd_partitions))
++ index = list_first_entry(&mtd_partitions, struct mtd_part, list)->index + 1;
++
++ return split_rootfs_data(part->master, &part->mtd, &tpart, index);
++ } else if ((offset > 0) && mtd->split) {
++ /* update the offsets of the existing partition */
++ size = mtd->size + part->offset - offset;
++
++ part = PART(mtd->split);
++ part->offset = offset;
++ part->mtd.size = size;
++ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++ (u32) part->offset, (u32) part->mtd.size);
++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++ strcpy(name, ROOTFS_SPLIT_NAME);
++ part->mtd.name = name;
++ } else if ((offset <= 0) && mtd->split) {
++ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++ /* mark existing partition as removed */
++ part = PART(mtd->split);
++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++ strcpy(name, ROOTFS_REMOVED_NAME);
++ part->mtd.name = name;
++ part->offset = 0;
++ part->mtd.size = 0;
++ }
++
++ return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+@@ -502,14 +654,29 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ struct mtd_part *slave;
+ uint64_t cur_offset = 0;
+- int i;
++ int i, j, ret;
+
+ printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+- for (i = 0; i < nbparts; i++) {
+- slave = add_one_partition(master, parts + i, i, cur_offset);
++ for (i = 0, j = 0; i < nbparts; i++) {
++ slave = add_one_partition(master, parts + i, j++, cur_offset);
+ if (!slave)
+ return -ENOMEM;
++
++ if (!strcmp(parts[i].name, "rootfs") && slave->registered) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++ if (ROOT_DEV == 0) {
++ printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++ "set to be root filesystem\n");
++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++ }
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++ ret = split_rootfs_data(master, &slave->mtd, &parts[i], j);
++ if (ret == 0)
++ j++;
++#endif
++ }
+ cur_offset = slave->offset + slave->mtd.size;
+ }
+
+@@ -517,6 +684,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++ int ret = 0;
++
++ if (IS_PART(mtd)) {
++ struct mtd_part *part;
++ struct mtd_info *master;
++
++ part = PART(mtd);
++ master = part->master;
++ if (master->refresh_device)
++ ret = master->refresh_device(master);
++ }
++
++ if (!ret && mtd->refresh_device)
++ ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++ refresh_rootfs_split(mtd);
++#endif
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
struct block_device *blkdev;
struct mtd_info mtd;
struct mutex write_mutex;
};
-@@ -80,6 +82,12 @@
+@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
size_t len = instr->len;
int err;
instr->state = MTD_ERASING;
mutex_lock(&dev->write_mutex);
err = _block2mtd_erase(dev, from, len);
-@@ -92,6 +100,10 @@
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
return err;
}
-@@ -103,10 +115,14 @@
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
struct page *page;
int index = from >> PAGE_SHIFT;
int offset = from & (PAGE_SIZE-1);
if (from + len > mtd->size)
len = mtd->size - from;
-@@ -121,10 +137,14 @@
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
len = len - cpylen;
page = page_read(dev->blkdev->bd_inode->i_mapping, index);
memcpy(buf, page_address(page) + offset, cpylen);
page_cache_release(page);
-@@ -135,7 +155,10 @@
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
offset = 0;
index++;
}
}
-@@ -187,12 +210,22 @@
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
size_t *retlen, const u_char *buf)
{
struct block2mtd_dev *dev = mtd->priv;
if (to + len > mtd->size)
len = mtd->size - to;
-@@ -201,6 +234,9 @@
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
mutex_unlock(&dev->write_mutex);
if (err > 0)
err = 0;
return err;
}
-@@ -209,30 +245,15 @@
+@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
static void block2mtd_sync(struct mtd_info *mtd)
{
struct block2mtd_dev *dev = mtd->priv;
- return;
-}
-
-+ read_lock(&dev->bdev_mutex);
-+ if (dev->blkdev)
-+ sync_blockdev(dev->blkdev);
-+ read_unlock(&dev->bdev_mutex);
-
+-
-static void block2mtd_free_device(struct block2mtd_dev *dev)
-{
- if (!dev)
- return;
-
- kfree(dev->mtd.name);
--
+
- if (dev->blkdev) {
- invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
- 0, -1);
- close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
- }
--
++ read_lock(&dev->bdev_mutex);
++ if (dev->blkdev)
++ sync_blockdev(dev->blkdev);
++ read_unlock(&dev->bdev_mutex);
+
- kfree(dev);
+ return;
}
--
+
-/* FIXME: ensure that mtd->size % erase_size == 0 */
--static struct block2mtd_dev *add_device(char *devname, int erase_size)
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+static int _open_bdev(struct block2mtd_dev *dev)
{
struct block_device *bdev;
- struct block2mtd_dev *dev;
-@@ -246,14 +267,14 @@
- return NULL;
+- struct block2mtd_dev *dev;
+- struct mtd_partition *part;
+- char *name;
+-
+- if (!devname)
+- return NULL;
+-
+- dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+- if (!dev)
+- return NULL;
/* Get a handle on the device */
- bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
if (devt) {
bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
}
-@@ -261,17 +282,97 @@
+@@ -263,17 +276,97 @@ static struct block2mtd_dev *add_device(
#endif
if (IS_ERR(bdev)) {
mutex_init(&dev->write_mutex);
+ rwlock_init(&dev->bdev_mutex);
- /* Setup the MTD structure */
- /* make the name contain the block device in */
-@@ -295,6 +396,7 @@
+ if (!mtdname)
+ mtdname = devname;
+@@ -297,6 +390,7 @@ static struct block2mtd_dev *add_device(
dev->mtd.read = block2mtd_read;
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
+ dev->mtd.refresh_device = block2mtd_refresh;
- if (add_mtd_device(&dev->mtd)) {
- /* Device didnt get added, so free the entry */
-diff -ruN linux-2.6.29-rc3.orig/drivers/mtd/Kconfig linux-2.6.29-rc3/drivers/mtd/Kconfig
---- linux-2.6.29-rc3.orig/drivers/mtd/Kconfig 2009-03-09 05:13:51.000000000 +0100
-+++ linux-2.6.29-rc3/drivers/mtd/Kconfig 2009-03-09 18:10:48.000000000 +0100
-@@ -53,6 +53,16 @@
- should normally be compiled as kernel modules. The modules perform
- various checks and verifications when loaded.
-
-+config MTD_ROOTFS_ROOT_DEV
-+ bool "Automatically set 'rootfs' partition to be root filesystem"
-+ depends on MTD_PARTITIONS
-+ default y
-+
-+config MTD_ROOTFS_SPLIT
-+ bool "Automatically split 'rootfs' partition for squashfs"
-+ depends on MTD_PARTITIONS
-+ default y
-+
- config MTD_REDBOOT_PARTS
- tristate "RedBoot partition table parsing"
- depends on MTD_PARTITIONS
-diff -ruN linux-2.6.29-rc3.orig/drivers/mtd/mtdchar.c linux-2.6.29-rc3/drivers/mtd/mtdchar.c
---- linux-2.6.29-rc3.orig/drivers/mtd/mtdchar.c 2009-03-09 05:13:51.000000000 +0100
-+++ linux-2.6.29-rc3/drivers/mtd/mtdchar.c 2009-03-09 18:10:48.000000000 +0100
+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
@@ -16,6 +16,7 @@
#include <linux/mtd/mtd.h>
#include <asm/uaccess.h>
-@@ -773,6 +774,13 @@
+@@ -773,6 +774,13 @@ static int mtd_ioctl(struct inode *inode
file->f_pos = 0;
break;
}
default:
ret = -ENOTTY;
-diff -ruN linux-2.6.29-rc3.orig/drivers/mtd/mtdpart.c linux-2.6.29-rc3/drivers/mtd/mtdpart.c
---- linux-2.6.29-rc3.orig/drivers/mtd/mtdpart.c 2009-03-09 05:13:51.000000000 +0100
-+++ linux-2.6.29-rc3/drivers/mtd/mtdpart.c 2009-03-09 18:29:58.000000000 +0100
-@@ -18,6 +18,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/root_dev.h>
-
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -37,7 +39,7 @@
- * the pointer to that structure with this macro.
- */
- #define PART(x) ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->read == part_read)
-
- /*
- * MTD methods which simply translate the effective address and pass through
-@@ -489,6 +491,148 @@
- return slave;
- }
-
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+ char buf[512];
-+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-+ int len, ret;
-+
-+ ret = master->read(master, offset, sizeof(*sb), &len, buf);
-+ if (ret || (len != sizeof(*sb))) {
-+ printk(KERN_ALERT "split_squashfs: error occured while reading "
-+ "from \"%s\"\n", master->name);
-+ return -EINVAL;
-+ }
-+
-+ if (*((u32 *) buf) != SQUASHFS_MAGIC) {
-+ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+ master->name);
-+ *split_offset = 0;
-+ return 0;
-+ }
-+
-+ if (sb->bytes_used <= 0) {
-+ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+ master->name);
-+ *split_offset = 0;
-+ return 0;
-+ }
-+
-+ len = (u32) sb->bytes_used;
-+ len += (offset & 0x000fffff);
-+ len += (master->erasesize - 1);
-+ len &= ~(master->erasesize - 1);
-+ len -= (offset & 0x000fffff);
-+ *split_offset = offset + len;
-+
-+ return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part,
-+ int index)
-+{
-+ struct mtd_partition *dpart;
-+ struct mtd_part *slave = NULL;
-+ int split_offset = 0;
-+ int ret;
-+
-+ ret = split_squashfs(master, part->offset, &split_offset);
-+ if (ret)
-+ return ret;
-+
-+ if (split_offset <= 0)
-+ return 0;
-+
-+ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
-+ if (dpart == NULL) {
-+ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
-+ ROOTFS_SPLIT_NAME);
-+ return -ENOMEM;
-+ }
-+
-+ memcpy(dpart, part, sizeof(*part));
-+ dpart->name = (unsigned char *)&dpart[1];
-+ strcpy(dpart->name, ROOTFS_SPLIT_NAME);
-+
-+ dpart->size -= split_offset - dpart->offset;
-+ dpart->offset = split_offset;
-+
-+ if (dpart == NULL)
-+ return 1;
-+
-+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%X, len=%X \n",
-+ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
-+
-+ slave = add_one_partition(master, dpart, index, split_offset);
-+ if (!slave) {
-+ kfree(dpart);
-+ return -ENOMEM;
-+ }
-+ rpart->split = &slave->mtd;
-+
-+ return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+ struct mtd_partition tpart;
-+ struct mtd_part *part;
-+ char *name;
-+ int index = 0;
-+ int offset, size;
-+ int ret;
-+
-+ part = PART(mtd);
-+
-+ /* check for the new squashfs offset first */
-+ ret = split_squashfs(part->master, part->offset, &offset);
-+ if (ret)
-+ return ret;
-+
-+ if ((offset > 0) && !mtd->split) {
-+ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+ /* if we don't have a rootfs split partition, create a new one */
-+ tpart.name = (char *) mtd->name;
-+ tpart.size = mtd->size;
-+ tpart.offset = part->offset;
-+
-+ /* find the index of the last partition */
-+ if (!list_empty(&mtd_partitions))
-+ index = list_first_entry(&mtd_partitions, struct mtd_part, list)->index + 1;
-+
-+ return split_rootfs_data(part->master, &part->mtd, &tpart, index);
-+ } else if ((offset > 0) && mtd->split) {
-+ /* update the offsets of the existing partition */
-+ size = mtd->size + part->offset - offset;
-+
-+ part = PART(mtd->split);
-+ part->offset = offset;
-+ part->mtd.size = size;
-+ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+ part->offset, part->mtd.size);
-+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+ strcpy(name, ROOTFS_SPLIT_NAME);
-+ part->mtd.name = name;
-+ } else if ((offset <= 0) && mtd->split) {
-+ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+ /* mark existing partition as removed */
-+ part = PART(mtd->split);
-+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+ strcpy(name, ROOTFS_REMOVED_NAME);
-+ part->mtd.name = name;
-+ part->offset = 0;
-+ part->mtd.size = 0;
-+ }
-+
-+ return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
-@@ -502,14 +646,29 @@
- {
- struct mtd_part *slave;
- uint64_t cur_offset = 0;
-- int i;
-+ int i, j, ret;
-
- printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
-
-- for (i = 0; i < nbparts; i++) {
-- slave = add_one_partition(master, parts + i, i, cur_offset);
-+ for (i = 0, j = 0; i < nbparts; i++) {
-+ slave = add_one_partition(master, parts + i, j++, cur_offset);
- if (!slave)
- return -ENOMEM;
-+
-+ if (!strcmp(parts[i].name, "rootfs") && slave->registered) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+ if (ROOT_DEV == 0) {
-+ printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+ "set to be root filesystem\n");
-+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+ }
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+ ret = split_rootfs_data(master, &slave->mtd, &parts[i], j);
-+ if (ret == 0)
-+ j++;
-+#endif
-+ }
- cur_offset = slave->offset + slave->mtd.size;
- }
-
-@@ -517,6 +676,32 @@
- }
- EXPORT_SYMBOL(add_mtd_partitions);
-
-+int refresh_mtd_partitions(struct mtd_info *mtd)
-+{
-+ int ret = 0;
-+
-+ if (IS_PART(mtd)) {
-+ struct mtd_part *part;
-+ struct mtd_info *master;
-+
-+ part = PART(mtd);
-+ master = part->master;
-+ if (master->refresh_device)
-+ ret = master->refresh_device(master);
-+ }
-+
-+ if (!ret && mtd->refresh_device)
-+ ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+ refresh_rootfs_split(mtd);
-+#endif
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
-
-diff -ruN linux-2.6.29-rc3.orig/include/linux/mtd/mtd.h linux-2.6.29-rc3/include/linux/mtd/mtd.h
---- linux-2.6.29-rc3.orig/include/linux/mtd/mtd.h 2009-03-09 05:13:58.000000000 +0100
-+++ linux-2.6.29-rc3/include/linux/mtd/mtd.h 2009-03-09 18:10:48.000000000 +0100
-@@ -100,6 +100,7 @@
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -100,6 +100,7 @@ struct mtd_oob_ops {
uint8_t *oobbuf;
};
struct mtd_info {
u_char type;
uint32_t flags;
-@@ -225,6 +226,9 @@
+@@ -225,6 +226,9 @@ struct mtd_info {
struct module *owner;
int usecount;
/* If the driver is something smart, like UBI, it may need to maintain
* its own reference counting. The below functions are only for driver.
* The driver may register its callbacks. These callbacks are not
-diff -ruN linux-2.6.29-rc3.orig/include/linux/mtd/partitions.h linux-2.6.29-rc3/include/linux/mtd/partitions.h
---- linux-2.6.29-rc3.orig/include/linux/mtd/partitions.h 2009-03-09 05:13:58.000000000 +0100
-+++ linux-2.6.29-rc3/include/linux/mtd/partitions.h 2009-03-09 18:10:48.000000000 +0100
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
@@ -34,6 +34,7 @@
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
*/
struct mtd_partition {
char *name; /* identifier string */
uint64_t size; /* partition size */
-@@ -41,6 +42,7 @@
+@@ -41,6 +42,7 @@ struct mtd_partition {
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/
struct mtd_info **mtdp; /* pointer to store the MTD object */
};
#define MTDPART_OFS_NXTBLK (-2)
-@@ -50,6 +52,7 @@
+@@ -50,6 +52,7 @@ struct mtd_partition {
int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
int del_mtd_partitions(struct mtd_info *);
/*
* Functions dealing with the various ways of partitioning the space
-diff -ruN linux-2.6.29-rc3.orig/include/mtd/mtd-abi.h linux-2.6.29-rc3/include/mtd/mtd-abi.h
---- linux-2.6.29-rc3.orig/include/mtd/mtd-abi.h 2009-03-09 05:13:57.000000000 +0100
-+++ linux-2.6.29-rc3/include/mtd/mtd-abi.h 2009-03-09 18:10:48.000000000 +0100
-@@ -93,6 +93,7 @@
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -93,6 +93,7 @@ struct otp_info {
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
#define MTDFILEMODE _IO('M', 19)
--- /dev/null
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ names += strlen(names)+1;
+
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+- i++;
+- parts[i].offset = parts[i-1].size + parts[i-1].offset;
+- parts[i].size = fl->next->img->flash_base - parts[i].offset;
+- parts[i].name = nullname;
+- }
++ if (!strcmp(parts[i].name, "rootfs")) {
++ parts[i].size = fl->next->img->flash_base;
++ parts[i].size &= ~(master->erasesize - 1);
++ parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++ nrparts--;
++ } else {
++ i++;
++ parts[i].offset = parts[i-1].size + parts[i-1].offset;
++ parts[i].size = fl->next->img->flash_base - parts[i].offset;
++ parts[i].name = nullname;
+ #endif
++ }
++ }
+ tmp_fl = fl;
+ fl = fl->next;
+ kfree(tmp_fl);
--- /dev/null
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+
++#define BOARD_CONFIG_PART "boardconfig"
++
+ struct fis_image_desc {
+ unsigned char name[16]; // Null terminated name
+ uint32_t flash_base; // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+ struct mtd_partition **pparts,
+ unsigned long fis_origin)
+ {
++ unsigned long max_offset = 0;
+ int nrparts = 0;
+ struct fis_image_desc *buf;
+ struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ }
+ }
+ #endif
+- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+
+ if (!parts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+- nullname = (char *)&parts[nrparts];
++ nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ if (nulllen > 0) {
+ strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
++ if(max_offset < buf[i].flash_base + buf[i].size)
++ max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
++ if(master->size - max_offset >= master->erasesize)
++ {
++ parts[nrparts].size = master->size - max_offset;
++ parts[nrparts].offset = max_offset;
++ parts[nrparts].name = names;
++ strcpy(names, BOARD_CONFIG_PART);
++ nrparts++;
++ }
+ ret = nrparts;
+ *pparts = parts;
+ out:
--- /dev/null
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -574,6 +574,7 @@ struct platform_nand_chip {
+ int chip_delay;
+ unsigned int options;
+ const char **part_probe_types;
++ int (*chip_fixup)(struct mtd_info *mtd);
+ void *priv;
+ };
+
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -71,7 +71,18 @@ static int __init plat_nand_probe(struct
+ platform_set_drvdata(pdev, data);
+
+ /* Scan to find existance of the device */
+- if (nand_scan(&data->mtd, 1)) {
++ if (nand_scan_ident(&data->mtd, 1)) {
++ res = -ENXIO;
++ goto out;
++ }
++
++ if (pdata->chip.chip_fixup) {
++ res = pdata->chip.chip_fixup(&data->mtd);
++ if (res)
++ goto out;
++ }
++
++ if (nand_scan_tail(&data->mtd)) {
+ res = -ENXIO;
+ goto out;
+ }
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -180,6 +180,22 @@ config MTD_AR7_PARTS
+ ---help---
+ TI AR7 partitioning support
+
++config MTD_MYLOADER_PARTS
++ tristate "MyLoader partition parsing"
++ depends on MTD_PARTITIONS && (ADM5120 || ATHEROS || ATHEROS_AR71XX)
++ ---help---
++ MyLoader is a bootloader which allows the user to define partitions
++ in flash devices, by putting a table in the second erase block
++ on the device, similar to a partition table. This table gives the
++ offsets and lengths of the user defined partitions.
++
++ If you need code which can detect and parse these tables, and
++ register MTD 'partitions' corresponding to each image detected,
++ enable this option.
++
++ You will still need the parsing functions to be called by the driver
++ for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- /dev/null
+--- a/drivers/mtd/myloader.c
++++ b/drivers/mtd/myloader.c
+@@ -19,7 +19,7 @@
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+-#include <linux/byteorder/generic.h>
++#include <linux/byteorder.h>
+ #include <linux/myloader.h>
+
+ #define BLOCK_LEN_MIN 0x10000
--- /dev/null
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -492,8 +492,7 @@ int nand_correct_data(struct mtd_info *m
+ if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ return 1; /* error in ecc data; no action needed */
+
+- printk(KERN_ERR "uncorrectable error : ");
+- return -1;
++ return -EBADMSG;
+ }
+ EXPORT_SYMBOL(nand_correct_data);
+
--- /dev/null
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++ char protocol[MAX_PROTOCOL_LEN];
++ char pattern[MAX_PATTERN_LEN];
++ u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -118,6 +118,22 @@ struct nf_conn
+ u_int32_t secmark;
+ #endif
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ struct {
++ /*
++ * e.g. "http". NULL before decision. "unknown" after decision
++ * if no match.
++ */
++ char *app_proto;
++ /*
++ * application layer data so far. NULL after match decision.
++ */
++ char *app_data;
++ unsigned int app_data_len;
++ } layer7;
++#endif
++
+ /* Storage reserved for other modules: */
+ union nf_conntrack_proto proto;
+
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -794,6 +794,27 @@ config NETFILTER_XT_MATCH_STATE
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7
++ tristate '"layer7" match support'
++ depends on NETFILTER_XTABLES
++ depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++ depends on NF_CT_ACCT
++ help
++ Say Y if you want to be able to classify connections (and their
++ packets) based on regular expression matching of their application
++ layer data. This is one way to classify applications such as
++ peer-to-peer filesharing systems that do not always use the same
++ port.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ tristate '"statistic" match support'
+ depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -84,6 +84,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n
+ * too. */
+ nf_ct_remove_expectations(ct);
+
++ #if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto)
++ kfree(ct->layer7.app_proto);
++ if(ct->layer7.app_data)
++ kfree(ct->layer7.app_data);
++ #endif
++
++
+ /* We overload first tuple to link into unconfirmed list. */
+ if (!nf_ct_is_confirmed(ct)) {
+ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -165,6 +165,12 @@ static int ct_seq_show(struct seq_file *
+ return -ENOSPC;
+ #endif
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto &&
++ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++ return -ENOSPC;
++#endif
++
+ if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ return -ENOSPC;
+
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c 1.3 of 18 April 87
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions. Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt. Lets it work in both kernel and user space.
++(So iptables can use it, for instance.) Yea, it goes both ways... */
++#if __KERNEL__
++ #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++ #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++ printk("<3>Regexp: %s\n", s);
++ /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases. They are:
++ *
++ * regstart char that must begin a match; '\0' if none obvious
++ * reganch is the match anchored (at beginning-of-line only)?
++ * regmust string (pointer into program) that match must include, or NULL
++ * regmlen length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot. Regmust permits fast rejection
++ * of lines that cannot possibly match. The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup). Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program". This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology). Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand. "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives. (Here we
++ * have one of the subtle syntax dependencies: an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.) The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM. In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure: the tail of the branch connects
++ * to the thing following the set of BRANCHes.) The opcodes are:
++ */
++
++/* definition number opnd? meaning */
++#define END 0 /* no End of program. */
++#define BOL 1 /* no Match "" at beginning of line. */
++#define EOL 2 /* no Match "" at end of line. */
++#define ANY 3 /* no Match any one character. */
++#define ANYOF 4 /* str Match any character in this string. */
++#define ANYBUT 5 /* str Match any character not in this string. */
++#define BRANCH 6 /* node Match this alternative, or the next... */
++#define BACK 7 /* no Match "", "next" ptr points backward. */
++#define EXACTLY 8 /* str Match this string. */
++#define NOTHING 9 /* no Match empty string. */
++#define STAR 10 /* node Match this (simple) thing 0 or more times. */
++#define PLUS 11 /* node Match this (simple) thing 1 or more times. */
++#define OPEN 20 /* no Mark this point in input as start of #n. */
++ /* OPEN+1 is number 1, etc. */
++#define CLOSE 30 /* no Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH The set of branches constituting a single choice are hooked
++ * together with their "next" pointers, since precedence prevents
++ * anything being concatenated to any individual branch. The
++ * "next" pointer of the last BRANCH in a choice points to the
++ * thing following the whole choice. This is also where the
++ * final "next" pointer of each individual branch points; each
++ * branch starts with the operand node of a BRANCH node.
++ *
++ * BACK Normal "next" pointers all implicitly point forward; BACK
++ * exists to make loop structures possible.
++ *
++ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
++ * BRANCH structures using BACK. Simple cases (one character
++ * per match) are implemented with STAR and PLUS for speed
++ * and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE ...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first. The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node. (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define OP(p) (*(p))
++#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define OPERAND(p) ((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#define FAIL(m) { regerror(m); return(NULL); }
++#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
++#define META "^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define HASWIDTH 01 /* Known never to match null string. */
++#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
++#define SPSTART 04 /* Starts with * or +. */
++#define WORST 0 /* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput; /* String-input pointer. */
++char *regbol; /* Beginning of input, for ^ check. */
++char **regstartp; /* Pointer to startp array. */
++char **regendp; /* Ditto for endp. */
++char *regparse; /* Input-scan pointer. */
++int regnpar; /* () count. */
++char regdummy;
++char *regcode; /* Code-emit pointer; ®dummy = don't. */
++long regsize; /* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define STATIC static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++ char *scan1;
++ char *scan2;
++ int count;
++
++ count = 0;
++ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */
++ if (*scan1 == *scan2++)
++ return(count);
++ count++;
++ }
++ return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code. So we cheat: we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it. (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++ register regexp *r;
++ register char *scan;
++ register char *longest;
++ register int len;
++ int flags;
++ struct match_globals g;
++
++ /* commented out by ethan
++ extern char *malloc();
++ */
++
++ if (exp == NULL)
++ FAIL("NULL argument");
++
++ /* First pass: determine size, legality. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regsize = 0L;
++ g.regcode = &g.regdummy;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Small enough for pointer-storage convention? */
++ if (g.regsize >= 32767L) /* Probably could be 65535L. */
++ FAIL("regexp too big");
++
++ /* Allocate space. */
++ *patternsize=sizeof(regexp) + (unsigned)g.regsize;
++ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++ if (r == NULL)
++ FAIL("out of space");
++
++ /* Second pass: emit code. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regcode = r->program;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Dig out information for optimizations. */
++ r->regstart = '\0'; /* Worst-case defaults. */
++ r->reganch = 0;
++ r->regmust = NULL;
++ r->regmlen = 0;
++ scan = r->program+1; /* First BRANCH. */
++ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */
++ scan = OPERAND(scan);
++
++ /* Starting-point info. */
++ if (OP(scan) == EXACTLY)
++ r->regstart = *OPERAND(scan);
++ else if (OP(scan) == BOL)
++ r->reganch++;
++
++ /*
++ * If there's something expensive in the r.e., find the
++ * longest literal string that must appear and make it the
++ * regmust. Resolve ties in favor of later strings, since
++ * the regstart check works with the beginning of the r.e.
++ * and avoiding duplication strengthens checking. Not a
++ * strong reason, but sufficient in the absence of others.
++ */
++ if (flags&SPSTART) {
++ longest = NULL;
++ len = 0;
++ for (; scan != NULL; scan = regnext(&g, scan))
++ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++ longest = OPERAND(scan);
++ len = strlen(OPERAND(scan));
++ }
++ r->regmust = longest;
++ r->regmlen = len;
++ }
++ }
++
++ return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++ register char *ret;
++ register char *br;
++ register char *ender;
++ register int parno = 0; /* 0 makes gcc happy */
++ int flags;
++
++ *flagp = HASWIDTH; /* Tentatively. */
++
++ /* Make an OPEN node, if parenthesized. */
++ if (paren) {
++ if (g->regnpar >= NSUBEXP)
++ FAIL("too many ()");
++ parno = g->regnpar;
++ g->regnpar++;
++ ret = regnode(g, OPEN+parno);
++ } else
++ ret = NULL;
++
++ /* Pick up the branches, linking them together. */
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ if (ret != NULL)
++ regtail(g, ret, br); /* OPEN -> first. */
++ else
++ ret = br;
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ while (*g->regparse == '|') {
++ g->regparse++;
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ regtail(g, ret, br); /* BRANCH -> BRANCH. */
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ }
++
++ /* Make a closing node, and hook it on the end. */
++ ender = regnode(g, (paren) ? CLOSE+parno : END);
++ regtail(g, ret, ender);
++
++ /* Hook the tails of the branches to the closing node. */
++ for (br = ret; br != NULL; br = regnext(g, br))
++ regoptail(g, br, ender);
++
++ /* Check for proper termination. */
++ if (paren && *g->regparse++ != ')') {
++ FAIL("unmatched ()");
++ } else if (!paren && *g->regparse != '\0') {
++ if (*g->regparse == ')') {
++ FAIL("unmatched ()");
++ } else
++ FAIL("junk on end"); /* "Can't happen". */
++ /* NOTREACHED */
++ }
++
++ return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char *chain;
++ register char *latest;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ ret = regnode(g, BRANCH);
++ chain = NULL;
++ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++ latest = regpiece(g, &flags);
++ if (latest == NULL)
++ return(NULL);
++ *flagp |= flags&HASWIDTH;
++ if (chain == NULL) /* First piece. */
++ *flagp |= flags&SPSTART;
++ else
++ regtail(g, chain, latest);
++ chain = latest;
++ }
++ if (chain == NULL) /* Loop ran zero times. */
++ (void) regnode(g, NOTHING);
++
++ return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized: they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char op;
++ register char *next;
++ int flags;
++
++ ret = regatom(g, &flags);
++ if (ret == NULL)
++ return(NULL);
++
++ op = *g->regparse;
++ if (!ISMULT(op)) {
++ *flagp = flags;
++ return(ret);
++ }
++
++ if (!(flags&HASWIDTH) && op != '?')
++ FAIL("*+ operand could be empty");
++ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++ if (op == '*' && (flags&SIMPLE))
++ reginsert(g, STAR, ret);
++ else if (op == '*') {
++ /* Emit x* as (x&|), where & means "self". */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regoptail(g, ret, regnode(g, BACK)); /* and loop */
++ regoptail(g, ret, ret); /* back */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '+' && (flags&SIMPLE))
++ reginsert(g, PLUS, ret);
++ else if (op == '+') {
++ /* Emit x+ as x(&|), where & means "self". */
++ next = regnode(g, BRANCH); /* Either */
++ regtail(g, ret, next);
++ regtail(g, regnode(g, BACK), ret); /* loop back */
++ regtail(g, next, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '?') {
++ /* Emit x? as (x|) */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ next = regnode(g, NOTHING); /* null. */
++ regtail(g, ret, next);
++ regoptail(g, ret, next);
++ }
++ g->regparse++;
++ if (ISMULT(*g->regparse))
++ FAIL("nested *?+");
++
++ return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization: gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run. Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ switch (*g->regparse++) {
++ case '^':
++ ret = regnode(g, BOL);
++ break;
++ case '$':
++ ret = regnode(g, EOL);
++ break;
++ case '.':
++ ret = regnode(g, ANY);
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ case '[': {
++ register int class;
++ register int classend;
++
++ if (*g->regparse == '^') { /* Complement of range. */
++ ret = regnode(g, ANYBUT);
++ g->regparse++;
++ } else
++ ret = regnode(g, ANYOF);
++ if (*g->regparse == ']' || *g->regparse == '-')
++ regc(g, *g->regparse++);
++ while (*g->regparse != '\0' && *g->regparse != ']') {
++ if (*g->regparse == '-') {
++ g->regparse++;
++ if (*g->regparse == ']' || *g->regparse == '\0')
++ regc(g, '-');
++ else {
++ class = UCHARAT(g->regparse-2)+1;
++ classend = UCHARAT(g->regparse);
++ if (class > classend+1)
++ FAIL("invalid [] range");
++ for (; class <= classend; class++)
++ regc(g, class);
++ g->regparse++;
++ }
++ } else
++ regc(g, *g->regparse++);
++ }
++ regc(g, '\0');
++ if (*g->regparse != ']')
++ FAIL("unmatched []");
++ g->regparse++;
++ *flagp |= HASWIDTH|SIMPLE;
++ }
++ break;
++ case '(':
++ ret = reg(g, 1, &flags);
++ if (ret == NULL)
++ return(NULL);
++ *flagp |= flags&(HASWIDTH|SPSTART);
++ break;
++ case '\0':
++ case '|':
++ case ')':
++ FAIL("internal urp"); /* Supposed to be caught earlier. */
++ break;
++ case '?':
++ case '+':
++ case '*':
++ FAIL("?+* follows nothing");
++ break;
++ case '\\':
++ if (*g->regparse == '\0')
++ FAIL("trailing \\");
++ ret = regnode(g, EXACTLY);
++ regc(g, *g->regparse++);
++ regc(g, '\0');
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ default: {
++ register int len;
++ register char ender;
++
++ g->regparse--;
++ len = my_strcspn((const char *)g->regparse, (const char *)META);
++ if (len <= 0)
++ FAIL("internal disaster");
++ ender = *(g->regparse+len);
++ if (len > 1 && ISMULT(ender))
++ len--; /* Back off clear of ?+* operand. */
++ *flagp |= HASWIDTH;
++ if (len == 1)
++ *flagp |= SIMPLE;
++ ret = regnode(g, EXACTLY);
++ while (len > 0) {
++ regc(g, *g->regparse++);
++ len--;
++ }
++ regc(g, '\0');
++ }
++ break;
++ }
++
++ return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char * /* Location. */
++regnode(struct match_globals *g, char op)
++{
++ register char *ret;
++ register char *ptr;
++
++ ret = g->regcode;
++ if (ret == &g->regdummy) {
++ g->regsize += 3;
++ return(ret);
++ }
++
++ ptr = ret;
++ *ptr++ = op;
++ *ptr++ = '\0'; /* Null "next" pointer. */
++ *ptr++ = '\0';
++ g->regcode = ptr;
++
++ return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++ if (g->regcode != &g->regdummy)
++ *g->regcode++ = b;
++ else
++ g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++ register char *src;
++ register char *dst;
++ register char *place;
++
++ if (g->regcode == &g->regdummy) {
++ g->regsize += 3;
++ return;
++ }
++
++ src = g->regcode;
++ g->regcode += 3;
++ dst = g->regcode;
++ while (src > opnd)
++ *--dst = *--src;
++
++ place = opnd; /* Op node, where operand used to be. */
++ *place++ = op;
++ *place++ = '\0';
++ *place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++ register char *scan;
++ register char *temp;
++ register int offset;
++
++ if (p == &g->regdummy)
++ return;
++
++ /* Find last node. */
++ scan = p;
++ for (;;) {
++ temp = regnext(g, scan);
++ if (temp == NULL)
++ break;
++ scan = temp;
++ }
++
++ if (OP(scan) == BACK)
++ offset = scan - val;
++ else
++ offset = val - scan;
++ *(scan+1) = (offset>>8)&0377;
++ *(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++ /* "Operandless" and "op != BRANCH" are synonymous in practice. */
++ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++ return;
++ regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++ register char *s;
++ struct match_globals g;
++
++ /* Be paranoid... */
++ if (prog == NULL || string == NULL) {
++ printk("<3>Regexp: NULL parameter\n");
++ return(0);
++ }
++
++ /* Check validity of program. */
++ if (UCHARAT(prog->program) != MAGIC) {
++ printk("<3>Regexp: corrupted program\n");
++ return(0);
++ }
++
++ /* If there is a "must appear" string, look for it. */
++ if (prog->regmust != NULL) {
++ s = string;
++ while ((s = strchr(s, prog->regmust[0])) != NULL) {
++ if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++ break; /* Found it. */
++ s++;
++ }
++ if (s == NULL) /* Not present. */
++ return(0);
++ }
++
++ /* Mark beginning of line for ^ . */
++ g.regbol = string;
++
++ /* Simplest case: anchored match need be tried only once. */
++ if (prog->reganch)
++ return(regtry(&g, prog, string));
++
++ /* Messy cases: unanchored match. */
++ s = string;
++ if (prog->regstart != '\0')
++ /* We know what char it must start with. */
++ while ((s = strchr(s, prog->regstart)) != NULL) {
++ if (regtry(&g, prog, s))
++ return(1);
++ s++;
++ }
++ else
++ /* We don't -- general case. */
++ do {
++ if (regtry(&g, prog, s))
++ return(1);
++ } while (*s++ != '\0');
++
++ /* Failure. */
++ return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int /* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++ register int i;
++ register char **sp;
++ register char **ep;
++
++ g->reginput = string;
++ g->regstartp = prog->startp;
++ g->regendp = prog->endp;
++
++ sp = prog->startp;
++ ep = prog->endp;
++ for (i = NSUBEXP; i > 0; i--) {
++ *sp++ = NULL;
++ *ep++ = NULL;
++ }
++ if (regmatch(g, prog->program + 1)) {
++ prog->startp[0] = string;
++ prog->endp[0] = g->reginput;
++ return(1);
++ } else
++ return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple: check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly. In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int /* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++ register char *scan = prog; /* Current node. */
++ char *next; /* Next node. */
++
++#ifdef DEBUG
++ if (scan != NULL && regnarrate)
++ fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++ while (scan != NULL) {
++#ifdef DEBUG
++ if (regnarrate)
++ fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++ next = regnext(g, scan);
++
++ switch (OP(scan)) {
++ case BOL:
++ if (g->reginput != g->regbol)
++ return(0);
++ break;
++ case EOL:
++ if (*g->reginput != '\0')
++ return(0);
++ break;
++ case ANY:
++ if (*g->reginput == '\0')
++ return(0);
++ g->reginput++;
++ break;
++ case EXACTLY: {
++ register int len;
++ register char *opnd;
++
++ opnd = OPERAND(scan);
++ /* Inline the first character, for speed. */
++ if (*opnd != *g->reginput)
++ return(0);
++ len = strlen(opnd);
++ if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++ return(0);
++ g->reginput += len;
++ }
++ break;
++ case ANYOF:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case ANYBUT:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case NOTHING:
++ case BACK:
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9: {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - OPEN;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set startp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regstartp[no] == NULL)
++ g->regstartp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - CLOSE;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set endp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regendp[no] == NULL)
++ g->regendp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case BRANCH: {
++ register char *save;
++
++ if (OP(next) != BRANCH) /* No choice. */
++ next = OPERAND(scan); /* Avoid recursion. */
++ else {
++ do {
++ save = g->reginput;
++ if (regmatch(g, OPERAND(scan)))
++ return(1);
++ g->reginput = save;
++ scan = regnext(g, scan);
++ } while (scan != NULL && OP(scan) == BRANCH);
++ return(0);
++ /* NOTREACHED */
++ }
++ }
++ break;
++ case STAR:
++ case PLUS: {
++ register char nextch;
++ register int no;
++ register char *save;
++ register int min;
++
++ /*
++ * Lookahead to avoid useless match attempts
++ * when we know what character comes next.
++ */
++ nextch = '\0';
++ if (OP(next) == EXACTLY)
++ nextch = *OPERAND(next);
++ min = (OP(scan) == STAR) ? 0 : 1;
++ save = g->reginput;
++ no = regrepeat(g, OPERAND(scan));
++ while (no >= min) {
++ /* If it could work, try it. */
++ if (nextch == '\0' || *g->reginput == nextch)
++ if (regmatch(g, next))
++ return(1);
++ /* Couldn't or didn't -- back up. */
++ no--;
++ g->reginput = save + no;
++ }
++ return(0);
++ }
++ break;
++ case END:
++ return(1); /* Success! */
++ break;
++ default:
++ printk("<3>Regexp: memory corruption\n");
++ return(0);
++ break;
++ }
++
++ scan = next;
++ }
++
++ /*
++ * We get here only if there's trouble -- normally "case END" is
++ * the terminating point.
++ */
++ printk("<3>Regexp: corrupted pointers\n");
++ return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++ register int count = 0;
++ register char *scan;
++ register char *opnd;
++
++ scan = g->reginput;
++ opnd = OPERAND(p);
++ switch (OP(p)) {
++ case ANY:
++ count = strlen(scan);
++ scan += count;
++ break;
++ case EXACTLY:
++ while (*opnd == *scan) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYOF:
++ while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYBUT:
++ while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ default: /* Oh dear. Called inappropriately. */
++ printk("<3>Regexp: internal foulup\n");
++ count = 0; /* Best compromise. */
++ break;
++ }
++ g->reginput = scan;
++
++ return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++ register int offset;
++
++ if (p == &g->regdummy)
++ return(NULL);
++
++ offset = NEXT(p);
++ if (offset == 0)
++ return(NULL);
++
++ if (OP(p) == BACK)
++ return(p-offset);
++ else
++ return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++ register char *s;
++ register char op = EXACTLY; /* Arbitrary non-END op. */
++ register char *next;
++ /* extern char *strchr(); */
++
++
++ s = r->program + 1;
++ while (op != END) { /* While that wasn't END last time... */
++ op = OP(s);
++ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
++ next = regnext(s);
++ if (next == NULL) /* Next ptr. */
++ printf("(0)");
++ else
++ printf("(%d)", (s-r->program)+(next-s));
++ s += 3;
++ if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++ /* Literal string, where present. */
++ while (*s != '\0') {
++ putchar(*s);
++ s++;
++ }
++ s++;
++ }
++ putchar('\n');
++ }
++
++ /* Header fields of interest. */
++ if (r->regstart != '\0')
++ printf("start `%c' ", r->regstart);
++ if (r->reganch)
++ printf("anchored ");
++ if (r->regmust != NULL)
++ printf("must have \"%s\"", r->regmust);
++ printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++ register char *p;
++ static char buf[BUFLEN];
++
++ strcpy(buf, ":");
++
++ switch (OP(op)) {
++ case BOL:
++ p = "BOL";
++ break;
++ case EOL:
++ p = "EOL";
++ break;
++ case ANY:
++ p = "ANY";
++ break;
++ case ANYOF:
++ p = "ANYOF";
++ break;
++ case ANYBUT:
++ p = "ANYBUT";
++ break;
++ case BRANCH:
++ p = "BRANCH";
++ break;
++ case EXACTLY:
++ p = "EXACTLY";
++ break;
++ case NOTHING:
++ p = "NOTHING";
++ break;
++ case BACK:
++ p = "BACK";
++ break;
++ case END:
++ p = "END";
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++ p = NULL;
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++ p = NULL;
++ break;
++ case STAR:
++ p = "STAR";
++ break;
++ case PLUS:
++ p = "PLUS";
++ break;
++ default:
++ printk("<3>Regexp: corrupted opcode\n");
++ break;
++ }
++ if (p != NULL)
++ strncat(buf, p, BUFLEN-strlen(buf));
++ return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10. If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP 10
++typedef struct regexp {
++ char *startp[NSUBEXP];
++ char *endp[NSUBEXP];
++ char regstart; /* Internal use only. */
++ char reganch; /* Internal use only. */
++ char *regmust; /* Internal use only. */
++ int regmlen; /* Internal use only. */
++ char program[1]; /* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define MAGIC 0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c 1.3 of 2 April 86
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++// printk("regexp(3): %s", s);
++// /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++ register char *src;
++ register char *dst;
++ register char c;
++ register int no;
++ register int len;
++
++ /* Not necessary and gcc doesn't like it -MLS */
++ /*extern char *strncpy();*/
++
++ if (prog == NULL || source == NULL || dest == NULL) {
++ regerror("NULL parm to regsub");
++ return;
++ }
++ if (UCHARAT(prog->program) != MAGIC) {
++ regerror("damaged regexp fed to regsub");
++ return;
++ }
++
++ src = source;
++ dst = dest;
++ while ((c = *src++) != '\0') {
++ if (c == '&')
++ no = 0;
++ else if (c == '\\' && '0' <= *src && *src <= '9')
++ no = *src++ - '0';
++ else
++ no = -1;
++
++ if (no < 0) { /* Ordinary character. */
++ if (c == '\\' && (*src == '\\' || *src == '&'))
++ c = *src++;
++ *dst++ = c;
++ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++ len = prog->endp[no] - prog->startp[no];
++ (void) strncpy(dst, prog->startp[no], len);
++ dst += len;
++ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */
++ regerror("damaged match string");
++ return;
++ }
++ }
++ }
++ *dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,651 @@
++/*
++ Kernel module to match application layer (OSI layer 7) data in connections.
++
++ http://l7-filter.sf.net
++
++ (C) 2003, 2004, 2005, 2006, 2007 Matthew Strait and Ethan Sommer.
++
++ This program is free software; you can redistribute it and/or
++ modify it under the terms of the GNU General Public License
++ as published by the Free Software Foundation; either version
++ 2 of the License, or (at your option) any later version.
++ http://www.gnu.org/licenses/gpl.txt
++
++ Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++ Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.19");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++ #define DPRINTK(format,args...) printk(format,##args)
++#else
++ #define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++ char * regex_string;
++ regexp * pattern;
++ struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++ BUG_ON(ct == NULL);
++ return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++ struct nf_conn_counter *acct;
++
++ BUG_ON(ct == NULL);
++ acct = nf_conn_acct_find(ct);
++ if (!acct)
++ return 0;
++ return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++ int i;
++
++ if(!f) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "friendly_print, bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++){
++ if(isprint(s[i]) && s[i] < 128) f[i] = s[i];
++ else if(isspace(s[i])) f[i] = ' ';
++ else f[i] = '.';
++ }
++ f[i] = '\0';
++ return f;
++}
++
++static char dec2hex(int i)
++{
++ switch (i) {
++ case 0 ... 9:
++ return (i + '0');
++ break;
++ case 10 ... 15:
++ return (i - 10 + 'a');
++ break;
++ default:
++ if (net_ratelimit())
++ printk("layer7: Problem in dec2hex\n");
++ return '\0';
++ }
++}
++
++static char * hex_print(unsigned char * s)
++{
++ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++ int i;
++
++ if(!g) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in hex_print, "
++ "bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++) {
++ g[i*3 ] = dec2hex(s[i]/16);
++ g[i*3 + 1] = dec2hex(s[i]%16);
++ g[i*3 + 2] = ' ';
++ }
++ g[i*3] = '\0';
++
++ return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp. As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string,
++ const char * protocol)
++{
++ struct pattern_cache * node = first_pattern_cache;
++ struct pattern_cache * last_pattern_cache = first_pattern_cache;
++ struct pattern_cache * tmp;
++ unsigned int len;
++
++ while (node != NULL) {
++ if (!strcmp(node->regex_string, regex_string))
++ return node->pattern;
++
++ last_pattern_cache = node;/* points at the last non-NULL node */
++ node = node->next;
++ }
++
++ /* If we reach the end of the list, then we have not yet cached
++ the pattern for this regex. Let's do that now.
++ Be paranoid about running out of memory to avoid list corruption. */
++ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++ if(!tmp) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ return NULL;
++ }
++
++ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC);
++ tmp->next = NULL;
++
++ if(!tmp->regex_string || !tmp->pattern) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ kfree(tmp->regex_string);
++ kfree(tmp->pattern);
++ kfree(tmp);
++ return NULL;
++ }
++
++ /* Ok. The new node is all ready now. */
++ node = tmp;
++
++ if(first_pattern_cache == NULL) /* list is empty */
++ first_pattern_cache = node; /* make node the beginning */
++ else
++ last_pattern_cache->next = node; /* attach node to the end */
++
++ /* copy the string and compile the regex */
++ len = strlen(regex_string);
++ DPRINTK("About to compile this: \"%s\"\n", regex_string);
++ node->pattern = regcomp((char *)regex_string, &len);
++ if ( !node->pattern ) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: Error compiling regexp "
++ "\"%s\" (%s)\n",
++ regex_string, protocol);
++ /* pattern is now cached as NULL, so we won't try again. */
++ }
++
++ strcpy(node->regex_string, regex_string);
++ return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++ if(!ip_hdr(skb)) /* not IP */
++ return 0;
++ if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++ ip_hdr(skb)->protocol != IPPROTO_UDP &&
++ ip_hdr(skb)->protocol != IPPROTO_ICMP)
++ return 0;
++ return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++ /* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++ int ip_hl = 4*ip_hdr(skb)->ihl;
++
++ if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++ /* 12 == offset into TCP header for the header length field.
++ Can't get this with skb->h.th->doff because the tcphdr
++ struct doesn't get set when routing (this is confirmed to be
++ true in Netfilter as well as QoS.) */
++ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++ return ip_hl + tcp_hl;
++ } else if( ip_hdr(skb)->protocol == IPPROTO_UDP ) {
++ return ip_hl + 8; /* UDP header is always 8 bytes */
++ } else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++ return ip_hl + 8; /* ICMP header is 8 bytes */
++ } else {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: tried to handle unknown "
++ "protocol!\n");
++ return ip_hl + 8; /* something reasonable */
++ }
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack,
++ struct nf_conn * master_conntrack,
++ enum ip_conntrack_info ctinfo,
++ enum ip_conntrack_info master_ctinfo,
++ const struct xt_layer7_info * info)
++{
++ /* If we're in here, throw the app data away */
++ if(master_conntrack->layer7.app_data != NULL) {
++
++ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++ if(!master_conntrack->layer7.app_proto) {
++ char * f =
++ friendly_print(master_conntrack->layer7.app_data);
++ char * g =
++ hex_print(master_conntrack->layer7.app_data);
++ DPRINTK("\nl7-filter gave up after %d bytes "
++ "(%d packets):\n%s\n",
++ strlen(f), total_acct_packets(master_conntrack), f);
++ kfree(f);
++ DPRINTK("In hex: %s\n", g);
++ kfree(g);
++ }
++ #endif
++
++ kfree(master_conntrack->layer7.app_data);
++ master_conntrack->layer7.app_data = NULL; /* don't free again */
++ }
++
++ if(master_conntrack->layer7.app_proto){
++ /* Here child connections set their .app_proto (for /proc) */
++ if(!conntrack->layer7.app_proto) {
++ conntrack->layer7.app_proto =
++ kmalloc(strlen(master_conntrack->layer7.app_proto)+1,
++ GFP_ATOMIC);
++ if(!conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory "
++ "in match_no_append, "
++ "bailing.\n");
++ return 1;
++ }
++ strcpy(conntrack->layer7.app_proto,
++ master_conntrack->layer7.app_proto);
++ }
++
++ return (!strcmp(master_conntrack->layer7.app_proto,
++ info->protocol));
++ }
++ else {
++ /* If not classified, set to "unknown" to distinguish from
++ connections that are still being tested. */
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match_no_append, bailing.\n");
++ return 1;
++ }
++ strcpy(master_conntrack->layer7.app_proto, "unknown");
++ return 0;
++ }
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++ char * app_data, int appdatalen)
++{
++ int length = 0, i;
++ int oldlength = master_conntrack->layer7.app_data_len;
++
++ /* This is a fix for a race condition by Deti Fliegl. However, I'm not
++ clear on whether the race condition exists or whether this really
++ fixes it. I might just be being dense... Anyway, if it's not really
++ a fix, all it does is waste a very small amount of time. */
++ if(!master_conntrack->layer7.app_data) return 0;
++
++ /* Strip nulls. Make everything lower case (our regex lib doesn't
++ do case insensitivity). Add it to the end of the current data. */
++ for(i = 0; i < maxdatalen-oldlength-1 &&
++ i < appdatalen; i++) {
++ if(app_data[i] != '\0') {
++ /* the kernel version of tolower mungs 'upper ascii' */
++ master_conntrack->layer7.app_data[length+oldlength] =
++ isascii(app_data[i])?
++ tolower(app_data[i]) : app_data[i];
++ length++;
++ }
++ }
++
++ master_conntrack->layer7.app_data[length+oldlength] = '\0';
++ master_conntrack->layer7.app_data_len = length + oldlength;
++
++ return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++ int val = 0;
++
++ for (;; s++) {
++ switch (*s) {
++ case '0'...'9':
++ val = 10*val+(*s-'0');
++ break;
++ default:
++ return val;
++ }
++ }
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++ int* eof, void * data)
++{
++ if(num_packets > 99 && net_ratelimit())
++ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++ page[0] = num_packets/10 + '0';
++ page[1] = num_packets%10 + '0';
++ page[2] = '\n';
++ page[3] = '\0';
++
++ *eof=1;
++
++ return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++ unsigned long count, void *data)
++{
++ char * foo = kmalloc(count, GFP_ATOMIC);
++
++ if(!foo){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory, bailing. "
++ "num_packets unchanged.\n");
++ return count;
++ }
++
++ if(copy_from_user(foo, buffer, count)) {
++ return -EFAULT;
++ }
++
++
++ num_packets = my_atoi(foo);
++ kfree (foo);
++
++ /* This has an arbitrary limit to make the math easier. I'm lazy.
++ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++ if(num_packets > 99) {
++ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++ num_packets = 99;
++ } else if(num_packets < 1) {
++ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++ num_packets = 1;
++ }
++
++ return count;
++}
++
++static bool
++match(const struct sk_buff *skbin,
++ const struct net_device *in,
++ const struct net_device *out,
++ const struct xt_match *match,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ bool *hotdrop)
++{
++ /* sidestep const without getting a compiler warning... */
++ struct sk_buff * skb = (struct sk_buff *)skbin;
++
++ const struct xt_layer7_info * info = matchinfo;
++ enum ip_conntrack_info master_ctinfo, ctinfo;
++ struct nf_conn *master_conntrack, *conntrack;
++ unsigned char * app_data;
++ unsigned int pattern_result, appdatalen;
++ regexp * comppattern;
++
++ /* Be paranoid/incompetent - lock the entire match function. */
++ spin_lock_bh(&l7_lock);
++
++ if(!can_handle(skb)){
++ DPRINTK("layer7: This is some protocol I can't handle.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Treat parent & all its children together as one connection, except
++ for the purpose of setting conntrack->layer7.app_proto in the actual
++ connection. This makes /proc/net/ip_conntrack more satisfying. */
++ if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++ !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++ DPRINTK("layer7: couldn't get conntrack.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Try to get a master conntrack (and its master etc) for FTP, etc. */
++ while (master_ct(master_conntrack) != NULL)
++ master_conntrack = master_ct(master_conntrack);
++
++ /* if we've classified it or seen too many packets */
++ if(total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto) {
++
++ pattern_result = match_no_append(conntrack, master_conntrack,
++ ctinfo, master_ctinfo, info);
++
++ /* skb->cb[0] == seen. Don't do things twice if there are
++ multiple l7 rules. I'm not sure that using cb for this purpose
++ is correct, even though it says "put your private variables
++ there". But it doesn't look like it is being used for anything
++ else in the skbs that make it here. */
++ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++
++ if(skb_is_nonlinear(skb)){
++ if(skb_linearize(skb) != 0){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: failed to linearize "
++ "packet, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* now that the skb is linearized, it's safe to set these. */
++ app_data = skb->data + app_data_offset(skb);
++ appdatalen = skb_tail_pointer(skb) - app_data;
++
++ /* the return value gets checked later, when we're ready to use it */
++ comppattern = compile_and_cache(info->pattern, info->protocol);
++
++ /* On the first packet of a connection, allocate space for app data */
++ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
++ !master_conntrack->layer7.app_data){
++ master_conntrack->layer7.app_data =
++ kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ master_conntrack->layer7.app_data[0] = '\0';
++ }
++
++ /* Can be here, but unallocated, if numpackets is increased near
++ the beginning of a connection */
++ if(master_conntrack->layer7.app_data == NULL){
++ spin_unlock_bh(&l7_lock);
++ return (info->invert); /* unmatched */
++ }
++
++ if(!skb->cb[0]){
++ int newbytes;
++ newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++ if(newbytes == 0) { /* didn't add any data */
++ skb->cb[0] = 1;
++ /* Didn't match before, not going to match now */
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* If looking for "unknown", then never match. "Unknown" means that
++ we've given up; we're still trying with these packets. */
++ if(!strcmp(info->protocol, "unknown")) {
++ pattern_result = 0;
++ /* If looking for "unset", then always match. "Unset" means that we
++ haven't yet classified the connection. */
++ } else if(!strcmp(info->protocol, "unset")) {
++ pattern_result = 2;
++ DPRINTK("layer7: matched unset: not yet classified "
++ "(%d/%d packets)\n", total_acct_packets(master_conntrack), num_packets);
++ /* If the regexp failed to compile, don't bother running it */
++ } else if(comppattern &&
++ regexec(comppattern, master_conntrack->layer7.app_data)){
++ DPRINTK("layer7: matched %s\n", info->protocol);
++ pattern_result = 1;
++ } else pattern_result = 0;
++
++ if(pattern_result == 1) {
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++ strcpy(master_conntrack->layer7.app_proto, info->protocol);
++ } else if(pattern_result > 1) { /* cleanup from "unset" */
++ pattern_result = 1;
++ }
++
++ /* mark the packet seen */
++ skb->cb[0] = 1;
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++}
++
++static bool check(const char *tablename,
++ const void *inf,
++ const struct xt_match *match,
++ void *matchinfo,
++ unsigned int hook_mask)
++
++{
++ // load nf_conntrack_ipv4
++ if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", match->family);
++ return 0;
++ }
++ return 1;
++}
++
++static void
++destroy(const struct xt_match *match, void *matchinfo)
++{
++ nf_ct_l3proto_module_put(match->family);
++}
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++ .name = "layer7",
++ .family = AF_INET,
++ .checkentry = check,
++ .match = match,
++ .destroy = destroy,
++ .matchsize = sizeof(struct xt_layer7_info),
++ .me = THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,23)
++ remove_proc_entry("layer7_numpackets", proc_net);
++#else
++ remove_proc_entry("layer7_numpackets", init_net.proc_net);
++#endif
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++ struct proc_dir_entry* entry;
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,23)
++ entry = create_proc_entry("layer7_numpackets", 0644, proc_net);
++#else
++ entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++#endif
++ entry->read_proc = layer7_read_proc;
++ entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++ need_conntrack();
++
++ layer7_init_proc();
++ if(maxdatalen < 1) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++ "using 1\n");
++ maxdatalen = 1;
++ }
++ /* This is not a hard limit. It's just here to prevent people from
++ bringing their slow machines to a grinding halt. */
++ else if(maxdatalen > 65536) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++ "using 65536\n");
++ maxdatalen = 65536;
++ }
++ return xt_register_matches(xt_layer7_match,
++ ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++ layer7_cleanup_proc();
++ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
--- /dev/null
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+ char protocol[MAX_PROTOCOL_LEN];
+ char pattern[MAX_PATTERN_LEN];
+ u_int8_t invert;
++ u_int8_t pkt;
+ };
+
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+
+ /* add the new app data to the conntrack. Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+- char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ int length = 0, i;
+- int oldlength = master_conntrack->layer7.app_data_len;
+-
+- /* This is a fix for a race condition by Deti Fliegl. However, I'm not
+- clear on whether the race condition exists or whether this really
+- fixes it. I might just be being dense... Anyway, if it's not really
+- a fix, all it does is waste a very small amount of time. */
+- if(!master_conntrack->layer7.app_data) return 0;
++ if (!target) return 0;
+
+ /* Strip nulls. Make everything lower case (our regex lib doesn't
+ do case insensitivity). Add it to the end of the current data. */
+- for(i = 0; i < maxdatalen-oldlength-1 &&
+- i < appdatalen; i++) {
++ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ if(app_data[i] != '\0') {
+ /* the kernel version of tolower mungs 'upper ascii' */
+- master_conntrack->layer7.app_data[length+oldlength] =
++ target[length+offset] =
+ isascii(app_data[i])?
+ tolower(app_data[i]) : app_data[i];
+ length++;
+ }
+ }
++ target[length+offset] = '\0';
++
++ return length;
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++ char * app_data, int appdatalen)
++{
++ int length;
+
+- master_conntrack->layer7.app_data[length+oldlength] = '\0';
+- master_conntrack->layer7.app_data_len = length + oldlength;
++ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++ master_conntrack->layer7.app_data_len += length;
+
+ return length;
+ }
+@@ -428,7 +430,7 @@ match(const struct sk_buff *skbin,
+ const struct xt_layer7_info * info = matchinfo;
+ enum ip_conntrack_info master_ctinfo, ctinfo;
+ struct nf_conn *master_conntrack, *conntrack;
+- unsigned char * app_data;
++ unsigned char *app_data, *tmp_data;
+ unsigned int pattern_result, appdatalen;
+ regexp * comppattern;
+
+@@ -456,8 +458,8 @@ match(const struct sk_buff *skbin,
+ master_conntrack = master_ct(master_conntrack);
+
+ /* if we've classified it or seen too many packets */
+- if(total_acct_packets(master_conntrack) > num_packets ||
+- master_conntrack->layer7.app_proto) {
++ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto)) {
+
+ pattern_result = match_no_append(conntrack, master_conntrack,
+ ctinfo, master_ctinfo, info);
+@@ -490,6 +492,25 @@ match(const struct sk_buff *skbin,
+ /* the return value gets checked later, when we're ready to use it */
+ comppattern = compile_and_cache(info->pattern, info->protocol);
+
++ if (info->pkt) {
++ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!tmp_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++ return info->invert;
++ }
++
++ tmp_data[0] = '\0';
++ add_datastr(tmp_data, 0, app_data, appdatalen);
++ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++ kfree(tmp_data);
++ tmp_data = NULL;
++ spin_unlock_bh(&l7_lock);
++
++ return (pattern_result ^ info->invert);
++ }
++
+ /* On the first packet of a connection, allocate space for app data */
+ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
+ !master_conntrack->layer7.app_data){
--- /dev/null
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
+ #define IPT_F_GOTO 0x02 /* Set if jump is a goto */
+ #define IPT_F_MASK 0x03 /* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
+
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -88,6 +88,9 @@ ip_packet_match(const struct iphdr *ip,
+
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+
++ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++ return true;
++
+ if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ IPT_INV_SRCIP)
+ || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -147,13 +150,32 @@ ip_packet_match(const struct iphdr *ip,
+ return false;
+ }
+
++#undef FWINV
+ return true;
+ }
+
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+- if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++ if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++ FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++ goto has_match_rules;
++
++ if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++ IPT_INV_VIA_IN) ||
++ FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++ IPT_INV_VIA_OUT))
++ goto has_match_rules;
++
++ if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++ goto has_match_rules;
++
++ ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++ if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ duprintf("Unknown flag bits set: %08X\n",
+ ip->flags & ~IPT_F_MASK);
+ return false;
+@@ -163,6 +185,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ ip->invflags & ~IPT_INV_MASK);
+ return false;
+ }
++
++#undef FWINV
+ return true;
+ }
+
+@@ -210,7 +234,6 @@ unconditional(const struct ipt_ip *ip)
+ return 0;
+
+ return 1;
+-#undef FWINV
+ }
+
+ #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
--- /dev/null
+--- a/net/ipv4/netfilter/arp_tables.c
++++ b/net/ipv4/netfilter/arp_tables.c
+@@ -374,7 +374,9 @@ static int mark_source_chains(struct xt_
+ && unconditional(&e->arp)) || visited) {
+ unsigned int oldpos, size;
+
+- if (t->verdict < -NF_MAX_VERDICT - 1) {
++ if ((strcmp(t->target.u.user.name,
++ ARPT_STANDARD_TARGET) == 0) &&
++ t->verdict < -NF_MAX_VERDICT - 1) {
+ duprintf("mark_source_chains: bad "
+ "negative verdict (%i)\n",
+ t->verdict);
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -74,6 +74,25 @@ do { \
+
+ Hence the start of any table is given by get_table() below. */
+
++static unsigned long ifname_compare(const char *_a, const char *_b,
++ const unsigned char *_mask)
++{
++ const unsigned long *a = (const unsigned long *)_a;
++ const unsigned long *b = (const unsigned long *)_b;
++ const unsigned long *mask = (const unsigned long *)_mask;
++ unsigned long ret;
++
++ ret = (a[0] ^ b[0]) & mask[0];
++ if (IFNAMSIZ > sizeof(unsigned long))
++ ret |= (a[1] ^ b[1]) & mask[1];
++ if (IFNAMSIZ > 2 * sizeof(unsigned long))
++ ret |= (a[2] ^ b[2]) & mask[2];
++ if (IFNAMSIZ > 3 * sizeof(unsigned long))
++ ret |= (a[3] ^ b[3]) & mask[3];
++ BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
++ return ret;
++}
++
+ /* Returns whether matches rule or not. */
+ /* Performance critical - called for every packet */
+ static inline bool
+@@ -83,7 +102,6 @@ ip_packet_match(const struct iphdr *ip,
+ const struct ipt_ip *ipinfo,
+ int isfrag)
+ {
+- size_t i;
+ unsigned long ret;
+
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+@@ -106,12 +124,7 @@ ip_packet_match(const struct iphdr *ip,
+ return false;
+ }
+
+- /* Look for ifname matches; this should unroll nicely. */
+- for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
+- ret |= (((const unsigned long *)indev)[i]
+- ^ ((const unsigned long *)ipinfo->iniface)[i])
+- & ((const unsigned long *)ipinfo->iniface_mask)[i];
+- }
++ ret = ifname_compare(indev, ipinfo->iniface, ipinfo->iniface_mask);
+
+ if (FWINV(ret != 0, IPT_INV_VIA_IN)) {
+ dprintf("VIA in mismatch (%s vs %s).%s\n",
+@@ -120,11 +133,7 @@ ip_packet_match(const struct iphdr *ip,
+ return false;
+ }
+
+- for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
+- ret |= (((const unsigned long *)outdev)[i]
+- ^ ((const unsigned long *)ipinfo->outiface)[i])
+- & ((const unsigned long *)ipinfo->outiface_mask)[i];
+- }
++ ret = ifname_compare(outdev, ipinfo->outiface, ipinfo->outiface_mask);
+
+ if (FWINV(ret != 0, IPT_INV_VIA_OUT)) {
+ dprintf("VIA out mismatch (%s vs %s).%s\n",
+@@ -519,7 +528,9 @@ mark_source_chains(struct xt_table_info
+ && unconditional(&e->ip)) || visited) {
+ unsigned int oldpos, size;
+
+- if (t->verdict < -NF_MAX_VERDICT - 1) {
++ if ((strcmp(t->target.u.user.name,
++ IPT_STANDARD_TARGET) == 0) &&
++ t->verdict < -NF_MAX_VERDICT - 1) {
+ duprintf("mark_source_chains: bad "
+ "negative verdict (%i)\n",
+ t->verdict);
+--- a/net/ipv6/netfilter/ip6_tables.c
++++ b/net/ipv6/netfilter/ip6_tables.c
+@@ -525,7 +525,9 @@ mark_source_chains(struct xt_table_info
+ && unconditional(&e->ipv6)) || visited) {
+ unsigned int oldpos, size;
+
+- if (t->verdict < -NF_MAX_VERDICT - 1) {
++ if ((strcmp(t->target.u.user.name,
++ IP6T_STANDARD_TARGET) == 0) &&
++ t->verdict < -NF_MAX_VERDICT - 1) {
+ duprintf("mark_source_chains: bad "
+ "negative verdict (%i)\n",
+ t->verdict);
--- /dev/null
+--- a/include/linux/netfilter_ipv4/Kbuild
++++ b/include/linux/netfilter_ipv4/Kbuild
+@@ -45,3 +45,14 @@ header-y += ipt_ttl.h
+
+ unifdef-y += ip_queue.h
+ unifdef-y += ip_tables.h
++
++unifdef-y += ip_set.h
++header-y += ip_set_iphash.h
++header-y += ip_set_ipmap.h
++header-y += ip_set_ipporthash.h
++unifdef-y += ip_set_iptree.h
++unifdef-y += ip_set_iptreemap.h
++header-y += ip_set_jhash.h
++header-y += ip_set_macipmap.h
++unifdef-y += ip_set_nethash.h
++header-y += ip_set_portmap.h
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set.h
+@@ -0,0 +1,498 @@
++#ifndef _IP_SET_H
++#define _IP_SET_H
++
++/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
++ * Patrick Schaaf <bof@bof.de>
++ * Martin Josefsson <gandalf@wlug.westbo.se>
++ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#if 0
++#define IP_SET_DEBUG
++#endif
++
++/*
++ * A sockopt of such quality has hardly ever been seen before on the open
++ * market! This little beauty, hardly ever used: above 64, so it's
++ * traditionally used for firewalling, not touched (even once!) by the
++ * 2.0, 2.2 and 2.4 kernels!
++ *
++ * Comes with its own certificate of authenticity, valid anywhere in the
++ * Free world!
++ *
++ * Rusty, 19.4.2000
++ */
++#define SO_IP_SET 83
++
++/*
++ * Heavily modify by Joakim Axelsson 08.03.2002
++ * - Made it more modulebased
++ *
++ * Additional heavy modifications by Jozsef Kadlecsik 22.02.2004
++ * - bindings added
++ * - in order to "deal with" backward compatibility, renamed to ipset
++ */
++
++/*
++ * Used so that the kernel module and ipset-binary can match their versions
++ */
++#define IP_SET_PROTOCOL_VERSION 2
++
++#define IP_SET_MAXNAMELEN 32 /* set names and set typenames */
++
++/* Lets work with our own typedef for representing an IP address.
++ * We hope to make the code more portable, possibly to IPv6...
++ *
++ * The representation works in HOST byte order, because most set types
++ * will perform arithmetic operations and compare operations.
++ *
++ * For now the type is an uint32_t.
++ *
++ * Make sure to ONLY use the functions when translating and parsing
++ * in order to keep the host byte order and make it more portable:
++ * parse_ip()
++ * parse_mask()
++ * parse_ipandmask()
++ * ip_tostring()
++ * (Joakim: where are they???)
++ */
++
++typedef uint32_t ip_set_ip_t;
++
++/* Sets are identified by an id in kernel space. Tweak with ip_set_id_t
++ * and IP_SET_INVALID_ID if you want to increase the max number of sets.
++ */
++typedef uint16_t ip_set_id_t;
++
++#define IP_SET_INVALID_ID 65535
++
++/* How deep we follow bindings */
++#define IP_SET_MAX_BINDINGS 6
++
++/*
++ * Option flags for kernel operations (ipt_set_info)
++ */
++#define IPSET_SRC 0x01 /* Source match/add */
++#define IPSET_DST 0x02 /* Destination match/add */
++#define IPSET_MATCH_INV 0x04 /* Inverse matching */
++
++/*
++ * Set features
++ */
++#define IPSET_TYPE_IP 0x01 /* IP address type of set */
++#define IPSET_TYPE_PORT 0x02 /* Port type of set */
++#define IPSET_DATA_SINGLE 0x04 /* Single data storage */
++#define IPSET_DATA_DOUBLE 0x08 /* Double data storage */
++
++/* Reserved keywords */
++#define IPSET_TOKEN_DEFAULT ":default:"
++#define IPSET_TOKEN_ALL ":all:"
++
++/* SO_IP_SET operation constants, and their request struct types.
++ *
++ * Operation ids:
++ * 0-99: commands with version checking
++ * 100-199: add/del/test/bind/unbind
++ * 200-299: list, save, restore
++ */
++
++/* Single shot operations:
++ * version, create, destroy, flush, rename and swap
++ *
++ * Sets are identified by name.
++ */
++
++#define IP_SET_REQ_STD \
++ unsigned op; \
++ unsigned version; \
++ char name[IP_SET_MAXNAMELEN]
++
++#define IP_SET_OP_CREATE 0x00000001 /* Create a new (empty) set */
++struct ip_set_req_create {
++ IP_SET_REQ_STD;
++ char typename[IP_SET_MAXNAMELEN];
++};
++
++#define IP_SET_OP_DESTROY 0x00000002 /* Remove a (empty) set */
++struct ip_set_req_std {
++ IP_SET_REQ_STD;
++};
++
++#define IP_SET_OP_FLUSH 0x00000003 /* Remove all IPs in a set */
++/* Uses ip_set_req_std */
++
++#define IP_SET_OP_RENAME 0x00000004 /* Rename a set */
++/* Uses ip_set_req_create */
++
++#define IP_SET_OP_SWAP 0x00000005 /* Swap two sets */
++/* Uses ip_set_req_create */
++
++union ip_set_name_index {
++ char name[IP_SET_MAXNAMELEN];
++ ip_set_id_t index;
++};
++
++#define IP_SET_OP_GET_BYNAME 0x00000006 /* Get set index by name */
++struct ip_set_req_get_set {
++ unsigned op;
++ unsigned version;
++ union ip_set_name_index set;
++};
++
++#define IP_SET_OP_GET_BYINDEX 0x00000007 /* Get set name by index */
++/* Uses ip_set_req_get_set */
++
++#define IP_SET_OP_VERSION 0x00000100 /* Ask kernel version */
++struct ip_set_req_version {
++ unsigned op;
++ unsigned version;
++};
++
++/* Double shots operations:
++ * add, del, test, bind and unbind.
++ *
++ * First we query the kernel to get the index and type of the target set,
++ * then issue the command. Validity of IP is checked in kernel in order
++ * to minimalize sockopt operations.
++ */
++
++/* Get minimal set data for add/del/test/bind/unbind IP */
++#define IP_SET_OP_ADT_GET 0x00000010 /* Get set and type */
++struct ip_set_req_adt_get {
++ unsigned op;
++ unsigned version;
++ union ip_set_name_index set;
++ char typename[IP_SET_MAXNAMELEN];
++};
++
++#define IP_SET_REQ_BYINDEX \
++ unsigned op; \
++ ip_set_id_t index;
++
++struct ip_set_req_adt {
++ IP_SET_REQ_BYINDEX;
++};
++
++#define IP_SET_OP_ADD_IP 0x00000101 /* Add an IP to a set */
++/* Uses ip_set_req_adt, with type specific addage */
++
++#define IP_SET_OP_DEL_IP 0x00000102 /* Remove an IP from a set */
++/* Uses ip_set_req_adt, with type specific addage */
++
++#define IP_SET_OP_TEST_IP 0x00000103 /* Test an IP in a set */
++/* Uses ip_set_req_adt, with type specific addage */
++
++#define IP_SET_OP_BIND_SET 0x00000104 /* Bind an IP to a set */
++/* Uses ip_set_req_bind, with type specific addage */
++struct ip_set_req_bind {
++ IP_SET_REQ_BYINDEX;
++ char binding[IP_SET_MAXNAMELEN];
++};
++
++#define IP_SET_OP_UNBIND_SET 0x00000105 /* Unbind an IP from a set */
++/* Uses ip_set_req_bind, with type speficic addage
++ * index = 0 means unbinding for all sets */
++
++#define IP_SET_OP_TEST_BIND_SET 0x00000106 /* Test binding an IP to a set */
++/* Uses ip_set_req_bind, with type specific addage */
++
++/* Multiple shots operations: list, save, restore.
++ *
++ * - check kernel version and query the max number of sets
++ * - get the basic information on all sets
++ * and size required for the next step
++ * - get actual set data: header, data, bindings
++ */
++
++/* Get max_sets and the index of a queried set
++ */
++#define IP_SET_OP_MAX_SETS 0x00000020
++struct ip_set_req_max_sets {
++ unsigned op;
++ unsigned version;
++ ip_set_id_t max_sets; /* max_sets */
++ ip_set_id_t sets; /* real number of sets */
++ union ip_set_name_index set; /* index of set if name used */
++};
++
++/* Get the id and name of the sets plus size for next step */
++#define IP_SET_OP_LIST_SIZE 0x00000201
++#define IP_SET_OP_SAVE_SIZE 0x00000202
++struct ip_set_req_setnames {
++ unsigned op;
++ ip_set_id_t index; /* set to list/save */
++ size_t size; /* size to get setdata/bindings */
++ /* followed by sets number of struct ip_set_name_list */
++};
++
++struct ip_set_name_list {
++ char name[IP_SET_MAXNAMELEN];
++ char typename[IP_SET_MAXNAMELEN];
++ ip_set_id_t index;
++ ip_set_id_t id;
++};
++
++/* The actual list operation */
++#define IP_SET_OP_LIST 0x00000203
++struct ip_set_req_list {
++ IP_SET_REQ_BYINDEX;
++ /* sets number of struct ip_set_list in reply */
++};
++
++struct ip_set_list {
++ ip_set_id_t index;
++ ip_set_id_t binding;
++ u_int32_t ref;
++ size_t header_size; /* Set header data of header_size */
++ size_t members_size; /* Set members data of members_size */
++ size_t bindings_size; /* Set bindings data of bindings_size */
++};
++
++struct ip_set_hash_list {
++ ip_set_ip_t ip;
++ ip_set_id_t binding;
++};
++
++/* The save operation */
++#define IP_SET_OP_SAVE 0x00000204
++/* Uses ip_set_req_list, in the reply replaced by
++ * sets number of struct ip_set_save plus a marker
++ * ip_set_save followed by ip_set_hash_save structures.
++ */
++struct ip_set_save {
++ ip_set_id_t index;
++ ip_set_id_t binding;
++ size_t header_size; /* Set header data of header_size */
++ size_t members_size; /* Set members data of members_size */
++};
++
++/* At restoring, ip == 0 means default binding for the given set: */
++struct ip_set_hash_save {
++ ip_set_ip_t ip;
++ ip_set_id_t id;
++ ip_set_id_t binding;
++};
++
++/* The restore operation */
++#define IP_SET_OP_RESTORE 0x00000205
++/* Uses ip_set_req_setnames followed by ip_set_restore structures
++ * plus a marker ip_set_restore, followed by ip_set_hash_save
++ * structures.
++ */
++struct ip_set_restore {
++ char name[IP_SET_MAXNAMELEN];
++ char typename[IP_SET_MAXNAMELEN];
++ ip_set_id_t index;
++ size_t header_size; /* Create data of header_size */
++ size_t members_size; /* Set members data of members_size */
++};
++
++static inline int bitmap_bytes(ip_set_ip_t a, ip_set_ip_t b)
++{
++ return 4 * ((((b - a + 8) / 8) + 3) / 4);
++}
++
++#ifdef __KERNEL__
++
++#define ip_set_printk(format, args...) \
++ do { \
++ printk("%s: %s: ", __FILE__, __FUNCTION__); \
++ printk(format "\n" , ## args); \
++ } while (0)
++
++#if defined(IP_SET_DEBUG)
++#define DP(format, args...) \
++ do { \
++ printk("%s: %s (DBG): ", __FILE__, __FUNCTION__);\
++ printk(format "\n" , ## args); \
++ } while (0)
++#define IP_SET_ASSERT(x) \
++ do { \
++ if (!(x)) \
++ printk("IP_SET_ASSERT: %s:%i(%s)\n", \
++ __FILE__, __LINE__, __FUNCTION__); \
++ } while (0)
++#else
++#define DP(format, args...)
++#define IP_SET_ASSERT(x)
++#endif
++
++struct ip_set;
++
++/*
++ * The ip_set_type definition - one per set type, e.g. "ipmap".
++ *
++ * Each individual set has a pointer, set->type, going to one
++ * of these structures. Function pointers inside the structure implement
++ * the real behaviour of the sets.
++ *
++ * If not mentioned differently, the implementation behind the function
++ * pointers of a set_type, is expected to return 0 if ok, and a negative
++ * errno (e.g. -EINVAL) on error.
++ */
++struct ip_set_type {
++ struct list_head list; /* next in list of set types */
++
++ /* test for IP in set (kernel: iptables -m set src|dst)
++ * return 0 if not in set, 1 if in set.
++ */
++ int (*testip_kernel) (struct ip_set *set,
++ const struct sk_buff * skb,
++ ip_set_ip_t *ip,
++ const u_int32_t *flags,
++ unsigned char index);
++
++ /* test for IP in set (userspace: ipset -T set IP)
++ * return 0 if not in set, 1 if in set.
++ */
++ int (*testip) (struct ip_set *set,
++ const void *data, size_t size,
++ ip_set_ip_t *ip);
++
++ /*
++ * Size of the data structure passed by when
++ * adding/deletin/testing an entry.
++ */
++ size_t reqsize;
++
++ /* Add IP into set (userspace: ipset -A set IP)
++ * Return -EEXIST if the address is already in the set,
++ * and -ERANGE if the address lies outside the set bounds.
++ * If the address was not already in the set, 0 is returned.
++ */
++ int (*addip) (struct ip_set *set,
++ const void *data, size_t size,
++ ip_set_ip_t *ip);
++
++ /* Add IP into set (kernel: iptables ... -j SET set src|dst)
++ * Return -EEXIST if the address is already in the set,
++ * and -ERANGE if the address lies outside the set bounds.
++ * If the address was not already in the set, 0 is returned.
++ */
++ int (*addip_kernel) (struct ip_set *set,
++ const struct sk_buff * skb,
++ ip_set_ip_t *ip,
++ const u_int32_t *flags,
++ unsigned char index);
++
++ /* remove IP from set (userspace: ipset -D set --entry x)
++ * Return -EEXIST if the address is NOT in the set,
++ * and -ERANGE if the address lies outside the set bounds.
++ * If the address really was in the set, 0 is returned.
++ */
++ int (*delip) (struct ip_set *set,
++ const void *data, size_t size,
++ ip_set_ip_t *ip);
++
++ /* remove IP from set (kernel: iptables ... -j SET --entry x)
++ * Return -EEXIST if the address is NOT in the set,
++ * and -ERANGE if the address lies outside the set bounds.
++ * If the address really was in the set, 0 is returned.
++ */
++ int (*delip_kernel) (struct ip_set *set,
++ const struct sk_buff * skb,
++ ip_set_ip_t *ip,
++ const u_int32_t *flags,
++ unsigned char index);
++
++ /* new set creation - allocated type specific items
++ */
++ int (*create) (struct ip_set *set,
++ const void *data, size_t size);
++
++ /* retry the operation after successfully tweaking the set
++ */
++ int (*retry) (struct ip_set *set);
++
++ /* set destruction - free type specific items
++ * There is no return value.
++ * Can be called only when child sets are destroyed.
++ */
++ void (*destroy) (struct ip_set *set);
++
++ /* set flushing - reset all bits in the set, or something similar.
++ * There is no return value.
++ */
++ void (*flush) (struct ip_set *set);
++
++ /* Listing: size needed for header
++ */
++ size_t header_size;
++
++ /* Listing: Get the header
++ *
++ * Fill in the information in "data".
++ * This function is always run after list_header_size() under a
++ * writelock on the set. Therefor is the length of "data" always
++ * correct.
++ */
++ void (*list_header) (const struct ip_set *set,
++ void *data);
++
++ /* Listing: Get the size for the set members
++ */
++ int (*list_members_size) (const struct ip_set *set);
++
++ /* Listing: Get the set members
++ *
++ * Fill in the information in "data".
++ * This function is always run after list_member_size() under a
++ * writelock on the set. Therefor is the length of "data" always
++ * correct.
++ */
++ void (*list_members) (const struct ip_set *set,
++ void *data);
++
++ char typename[IP_SET_MAXNAMELEN];
++ unsigned char features;
++ int protocol_version;
++
++ /* Set this to THIS_MODULE if you are a module, otherwise NULL */
++ struct module *me;
++};
++
++extern int ip_set_register_set_type(struct ip_set_type *set_type);
++extern void ip_set_unregister_set_type(struct ip_set_type *set_type);
++
++/* A generic ipset */
++struct ip_set {
++ char name[IP_SET_MAXNAMELEN]; /* the name of the set */
++ rwlock_t lock; /* lock for concurrency control */
++ ip_set_id_t id; /* set id for swapping */
++ ip_set_id_t binding; /* default binding for the set */
++ atomic_t ref; /* in kernel and in hash references */
++ struct ip_set_type *type; /* the set types */
++ void *data; /* pooltype specific data */
++};
++
++/* Structure to bind set elements to sets */
++struct ip_set_hash {
++ struct list_head list; /* list of clashing entries in hash */
++ ip_set_ip_t ip; /* ip from set */
++ ip_set_id_t id; /* set id */
++ ip_set_id_t binding; /* set we bind the element to */
++};
++
++/* register and unregister set references */
++extern ip_set_id_t ip_set_get_byname(const char name[IP_SET_MAXNAMELEN]);
++extern ip_set_id_t ip_set_get_byindex(ip_set_id_t id);
++extern void ip_set_put(ip_set_id_t id);
++
++/* API for iptables set match, and SET target */
++extern void ip_set_addip_kernel(ip_set_id_t id,
++ const struct sk_buff *skb,
++ const u_int32_t *flags);
++extern void ip_set_delip_kernel(ip_set_id_t id,
++ const struct sk_buff *skb,
++ const u_int32_t *flags);
++extern int ip_set_testip_kernel(ip_set_id_t id,
++ const struct sk_buff *skb,
++ const u_int32_t *flags);
++
++#endif /* __KERNEL__ */
++
++#endif /*_IP_SET_H*/
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_iphash.h
+@@ -0,0 +1,30 @@
++#ifndef __IP_SET_IPHASH_H
++#define __IP_SET_IPHASH_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "iphash"
++#define MAX_RANGE 0x0000FFFF
++
++struct ip_set_iphash {
++ ip_set_ip_t *members; /* the iphash proper */
++ uint32_t elements; /* number of elements */
++ uint32_t hashsize; /* hash size */
++ uint16_t probes; /* max number of probes */
++ uint16_t resize; /* resize factor in percent */
++ ip_set_ip_t netmask; /* netmask */
++ void *initval[0]; /* initvals for jhash_1word */
++};
++
++struct ip_set_req_iphash_create {
++ uint32_t hashsize;
++ uint16_t probes;
++ uint16_t resize;
++ ip_set_ip_t netmask;
++};
++
++struct ip_set_req_iphash {
++ ip_set_ip_t ip;
++};
++
++#endif /* __IP_SET_IPHASH_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_ipmap.h
+@@ -0,0 +1,56 @@
++#ifndef __IP_SET_IPMAP_H
++#define __IP_SET_IPMAP_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "ipmap"
++#define MAX_RANGE 0x0000FFFF
++
++struct ip_set_ipmap {
++ void *members; /* the ipmap proper */
++ ip_set_ip_t first_ip; /* host byte order, included in range */
++ ip_set_ip_t last_ip; /* host byte order, included in range */
++ ip_set_ip_t netmask; /* subnet netmask */
++ ip_set_ip_t sizeid; /* size of set in IPs */
++ ip_set_ip_t hosts; /* number of hosts in a subnet */
++};
++
++struct ip_set_req_ipmap_create {
++ ip_set_ip_t from;
++ ip_set_ip_t to;
++ ip_set_ip_t netmask;
++};
++
++struct ip_set_req_ipmap {
++ ip_set_ip_t ip;
++};
++
++unsigned int
++mask_to_bits(ip_set_ip_t mask)
++{
++ unsigned int bits = 32;
++ ip_set_ip_t maskaddr;
++
++ if (mask == 0xFFFFFFFF)
++ return bits;
++
++ maskaddr = 0xFFFFFFFE;
++ while (--bits >= 0 && maskaddr != mask)
++ maskaddr <<= 1;
++
++ return bits;
++}
++
++ip_set_ip_t
++range_to_mask(ip_set_ip_t from, ip_set_ip_t to, unsigned int *bits)
++{
++ ip_set_ip_t mask = 0xFFFFFFFE;
++
++ *bits = 32;
++ while (--(*bits) >= 0 && mask && (to & mask) != from)
++ mask <<= 1;
++
++ return mask;
++}
++
++#endif /* __IP_SET_IPMAP_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_ipporthash.h
+@@ -0,0 +1,34 @@
++#ifndef __IP_SET_IPPORTHASH_H
++#define __IP_SET_IPPORTHASH_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "ipporthash"
++#define MAX_RANGE 0x0000FFFF
++#define INVALID_PORT (MAX_RANGE + 1)
++
++struct ip_set_ipporthash {
++ ip_set_ip_t *members; /* the ipporthash proper */
++ uint32_t elements; /* number of elements */
++ uint32_t hashsize; /* hash size */
++ uint16_t probes; /* max number of probes */
++ uint16_t resize; /* resize factor in percent */
++ ip_set_ip_t first_ip; /* host byte order, included in range */
++ ip_set_ip_t last_ip; /* host byte order, included in range */
++ void *initval[0]; /* initvals for jhash_1word */
++};
++
++struct ip_set_req_ipporthash_create {
++ uint32_t hashsize;
++ uint16_t probes;
++ uint16_t resize;
++ ip_set_ip_t from;
++ ip_set_ip_t to;
++};
++
++struct ip_set_req_ipporthash {
++ ip_set_ip_t ip;
++ ip_set_ip_t port;
++};
++
++#endif /* __IP_SET_IPPORTHASH_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_iptree.h
+@@ -0,0 +1,40 @@
++#ifndef __IP_SET_IPTREE_H
++#define __IP_SET_IPTREE_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "iptree"
++#define MAX_RANGE 0x0000FFFF
++
++struct ip_set_iptreed {
++ unsigned long expires[256]; /* x.x.x.ADDR */
++};
++
++struct ip_set_iptreec {
++ struct ip_set_iptreed *tree[256]; /* x.x.ADDR.* */
++};
++
++struct ip_set_iptreeb {
++ struct ip_set_iptreec *tree[256]; /* x.ADDR.*.* */
++};
++
++struct ip_set_iptree {
++ unsigned int timeout;
++ unsigned int gc_interval;
++#ifdef __KERNEL__
++ uint32_t elements; /* number of elements */
++ struct timer_list gc;
++ struct ip_set_iptreeb *tree[256]; /* ADDR.*.*.* */
++#endif
++};
++
++struct ip_set_req_iptree_create {
++ unsigned int timeout;
++};
++
++struct ip_set_req_iptree {
++ ip_set_ip_t ip;
++ unsigned int timeout;
++};
++
++#endif /* __IP_SET_IPTREE_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_iptreemap.h
+@@ -0,0 +1,40 @@
++#ifndef __IP_SET_IPTREEMAP_H
++#define __IP_SET_IPTREEMAP_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "iptreemap"
++
++#ifdef __KERNEL__
++struct ip_set_iptreemap_d {
++ unsigned char bitmap[32]; /* x.x.x.y */
++};
++
++struct ip_set_iptreemap_c {
++ struct ip_set_iptreemap_d *tree[256]; /* x.x.y.x */
++};
++
++struct ip_set_iptreemap_b {
++ struct ip_set_iptreemap_c *tree[256]; /* x.y.x.x */
++ unsigned char dirty[32];
++};
++#endif
++
++struct ip_set_iptreemap {
++ unsigned int gc_interval;
++#ifdef __KERNEL__
++ struct timer_list gc;
++ struct ip_set_iptreemap_b *tree[256]; /* y.x.x.x */
++#endif
++};
++
++struct ip_set_req_iptreemap_create {
++ unsigned int gc_interval;
++};
++
++struct ip_set_req_iptreemap {
++ ip_set_ip_t start;
++ ip_set_ip_t end;
++};
++
++#endif /* __IP_SET_IPTREEMAP_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_jhash.h
+@@ -0,0 +1,148 @@
++#ifndef _LINUX_IPSET_JHASH_H
++#define _LINUX_IPSET_JHASH_H
++
++/* This is a copy of linux/jhash.h but the types u32/u8 are changed
++ * to __u32/__u8 so that the header file can be included into
++ * userspace code as well. Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
++ */
++
++/* jhash.h: Jenkins hash support.
++ *
++ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ *
++ * http://burtleburtle.net/bob/hash/
++ *
++ * These are the credits from Bob's sources:
++ *
++ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
++ * hash(), hash2(), hash3, and mix() are externally useful functions.
++ * Routines to test the hash are included if SELF_TEST is defined.
++ * You can use this free for any purpose. It has no warranty.
++ *
++ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ *
++ * I've modified Bob's hash to be useful in the Linux kernel, and
++ * any bugs present are surely my fault. -DaveM
++ */
++
++/* NOTE: Arguments are modified. */
++#define __jhash_mix(a, b, c) \
++{ \
++ a -= b; a -= c; a ^= (c>>13); \
++ b -= c; b -= a; b ^= (a<<8); \
++ c -= a; c -= b; c ^= (b>>13); \
++ a -= b; a -= c; a ^= (c>>12); \
++ b -= c; b -= a; b ^= (a<<16); \
++ c -= a; c -= b; c ^= (b>>5); \
++ a -= b; a -= c; a ^= (c>>3); \
++ b -= c; b -= a; b ^= (a<<10); \
++ c -= a; c -= b; c ^= (b>>15); \
++}
++
++/* The golden ration: an arbitrary value */
++#define JHASH_GOLDEN_RATIO 0x9e3779b9
++
++/* The most generic version, hashes an arbitrary sequence
++ * of bytes. No alignment or length assumptions are made about
++ * the input key.
++ */
++static inline __u32 jhash(void *key, __u32 length, __u32 initval)
++{
++ __u32 a, b, c, len;
++ __u8 *k = key;
++
++ len = length;
++ a = b = JHASH_GOLDEN_RATIO;
++ c = initval;
++
++ while (len >= 12) {
++ a += (k[0] +((__u32)k[1]<<8) +((__u32)k[2]<<16) +((__u32)k[3]<<24));
++ b += (k[4] +((__u32)k[5]<<8) +((__u32)k[6]<<16) +((__u32)k[7]<<24));
++ c += (k[8] +((__u32)k[9]<<8) +((__u32)k[10]<<16)+((__u32)k[11]<<24));
++
++ __jhash_mix(a,b,c);
++
++ k += 12;
++ len -= 12;
++ }
++
++ c += length;
++ switch (len) {
++ case 11: c += ((__u32)k[10]<<24);
++ case 10: c += ((__u32)k[9]<<16);
++ case 9 : c += ((__u32)k[8]<<8);
++ case 8 : b += ((__u32)k[7]<<24);
++ case 7 : b += ((__u32)k[6]<<16);
++ case 6 : b += ((__u32)k[5]<<8);
++ case 5 : b += k[4];
++ case 4 : a += ((__u32)k[3]<<24);
++ case 3 : a += ((__u32)k[2]<<16);
++ case 2 : a += ((__u32)k[1]<<8);
++ case 1 : a += k[0];
++ };
++
++ __jhash_mix(a,b,c);
++
++ return c;
++}
++
++/* A special optimized version that handles 1 or more of __u32s.
++ * The length parameter here is the number of __u32s in the key.
++ */
++static inline __u32 jhash2(__u32 *k, __u32 length, __u32 initval)
++{
++ __u32 a, b, c, len;
++
++ a = b = JHASH_GOLDEN_RATIO;
++ c = initval;
++ len = length;
++
++ while (len >= 3) {
++ a += k[0];
++ b += k[1];
++ c += k[2];
++ __jhash_mix(a, b, c);
++ k += 3; len -= 3;
++ }
++
++ c += length * 4;
++
++ switch (len) {
++ case 2 : b += k[1];
++ case 1 : a += k[0];
++ };
++
++ __jhash_mix(a,b,c);
++
++ return c;
++}
++
++
++/* A special ultra-optimized versions that knows they are hashing exactly
++ * 3, 2 or 1 word(s).
++ *
++ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
++ * done at the end is not done here.
++ */
++static inline __u32 jhash_3words(__u32 a, __u32 b, __u32 c, __u32 initval)
++{
++ a += JHASH_GOLDEN_RATIO;
++ b += JHASH_GOLDEN_RATIO;
++ c += initval;
++
++ __jhash_mix(a, b, c);
++
++ return c;
++}
++
++static inline __u32 jhash_2words(__u32 a, __u32 b, __u32 initval)
++{
++ return jhash_3words(a, b, 0, initval);
++}
++
++static inline __u32 jhash_1word(__u32 a, __u32 initval)
++{
++ return jhash_3words(a, 0, 0, initval);
++}
++
++#endif /* _LINUX_IPSET_JHASH_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_macipmap.h
+@@ -0,0 +1,38 @@
++#ifndef __IP_SET_MACIPMAP_H
++#define __IP_SET_MACIPMAP_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "macipmap"
++#define MAX_RANGE 0x0000FFFF
++
++/* general flags */
++#define IPSET_MACIP_MATCHUNSET 1
++
++/* per ip flags */
++#define IPSET_MACIP_ISSET 1
++
++struct ip_set_macipmap {
++ void *members; /* the macipmap proper */
++ ip_set_ip_t first_ip; /* host byte order, included in range */
++ ip_set_ip_t last_ip; /* host byte order, included in range */
++ u_int32_t flags;
++};
++
++struct ip_set_req_macipmap_create {
++ ip_set_ip_t from;
++ ip_set_ip_t to;
++ u_int32_t flags;
++};
++
++struct ip_set_req_macipmap {
++ ip_set_ip_t ip;
++ unsigned char ethernet[ETH_ALEN];
++};
++
++struct ip_set_macip {
++ unsigned short flags;
++ unsigned char ethernet[ETH_ALEN];
++};
++
++#endif /* __IP_SET_MACIPMAP_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_malloc.h
+@@ -0,0 +1,116 @@
++#ifndef _IP_SET_MALLOC_H
++#define _IP_SET_MALLOC_H
++
++#ifdef __KERNEL__
++
++/* Memory allocation and deallocation */
++static size_t max_malloc_size = 0;
++
++static inline void init_max_malloc_size(void)
++{
++#define CACHE(x) max_malloc_size = x;
++#include <linux/kmalloc_sizes.h>
++#undef CACHE
++}
++
++static inline void * ip_set_malloc(size_t bytes)
++{
++ if (bytes > max_malloc_size)
++ return vmalloc(bytes);
++ else
++ return kmalloc(bytes, GFP_KERNEL);
++}
++
++static inline void ip_set_free(void * data, size_t bytes)
++{
++ if (bytes > max_malloc_size)
++ vfree(data);
++ else
++ kfree(data);
++}
++
++struct harray {
++ size_t max_elements;
++ void *arrays[0];
++};
++
++static inline void *
++harray_malloc(size_t hashsize, size_t typesize, int flags)
++{
++ struct harray *harray;
++ size_t max_elements, size, i, j;
++
++ if (!max_malloc_size)
++ init_max_malloc_size();
++
++ if (typesize > max_malloc_size)
++ return NULL;
++
++ max_elements = max_malloc_size/typesize;
++ size = hashsize/max_elements;
++ if (hashsize % max_elements)
++ size++;
++
++ /* Last pointer signals end of arrays */
++ harray = kmalloc(sizeof(struct harray) + (size + 1) * sizeof(void *),
++ flags);
++
++ if (!harray)
++ return NULL;
++
++ for (i = 0; i < size - 1; i++) {
++ harray->arrays[i] = kmalloc(max_elements * typesize, flags);
++ if (!harray->arrays[i])
++ goto undo;
++ memset(harray->arrays[i], 0, max_elements * typesize);
++ }
++ harray->arrays[i] = kmalloc((hashsize - i * max_elements) * typesize,
++ flags);
++ if (!harray->arrays[i])
++ goto undo;
++ memset(harray->arrays[i], 0, (hashsize - i * max_elements) * typesize);
++
++ harray->max_elements = max_elements;
++ harray->arrays[size] = NULL;
++
++ return (void *)harray;
++
++ undo:
++ for (j = 0; j < i; j++) {
++ kfree(harray->arrays[j]);
++ }
++ kfree(harray);
++ return NULL;
++}
++
++static inline void harray_free(void *h)
++{
++ struct harray *harray = (struct harray *) h;
++ size_t i;
++
++ for (i = 0; harray->arrays[i] != NULL; i++)
++ kfree(harray->arrays[i]);
++ kfree(harray);
++}
++
++static inline void harray_flush(void *h, size_t hashsize, size_t typesize)
++{
++ struct harray *harray = (struct harray *) h;
++ size_t i;
++
++ for (i = 0; harray->arrays[i+1] != NULL; i++)
++ memset(harray->arrays[i], 0, harray->max_elements * typesize);
++ memset(harray->arrays[i], 0,
++ (hashsize - i * harray->max_elements) * typesize);
++}
++
++#define HARRAY_ELEM(h, type, which) \
++({ \
++ struct harray *__h = (struct harray *)(h); \
++ ((type)((__h)->arrays[(which)/(__h)->max_elements]) \
++ + (which)%(__h)->max_elements); \
++})
++
++#endif /* __KERNEL__ */
++
++#endif /*_IP_SET_MALLOC_H*/
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_nethash.h
+@@ -0,0 +1,55 @@
++#ifndef __IP_SET_NETHASH_H
++#define __IP_SET_NETHASH_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "nethash"
++#define MAX_RANGE 0x0000FFFF
++
++struct ip_set_nethash {
++ ip_set_ip_t *members; /* the nethash proper */
++ uint32_t elements; /* number of elements */
++ uint32_t hashsize; /* hash size */
++ uint16_t probes; /* max number of probes */
++ uint16_t resize; /* resize factor in percent */
++ unsigned char cidr[30]; /* CIDR sizes */
++ void *initval[0]; /* initvals for jhash_1word */
++};
++
++struct ip_set_req_nethash_create {
++ uint32_t hashsize;
++ uint16_t probes;
++ uint16_t resize;
++};
++
++struct ip_set_req_nethash {
++ ip_set_ip_t ip;
++ unsigned char cidr;
++};
++
++static unsigned char shifts[] = {255, 253, 249, 241, 225, 193, 129, 1};
++
++static inline ip_set_ip_t
++pack(ip_set_ip_t ip, unsigned char cidr)
++{
++ ip_set_ip_t addr, *paddr = &addr;
++ unsigned char n, t, *a;
++
++ addr = htonl(ip & (0xFFFFFFFF << (32 - (cidr))));
++#ifdef __KERNEL__
++ DP("ip:%u.%u.%u.%u/%u", NIPQUAD(addr), cidr);
++#endif
++ n = cidr / 8;
++ t = cidr % 8;
++ a = &((unsigned char *)paddr)[n];
++ *a = *a /(1 << (8 - t)) + shifts[t];
++#ifdef __KERNEL__
++ DP("n: %u, t: %u, a: %u", n, t, *a);
++ DP("ip:%u.%u.%u.%u/%u, %u.%u.%u.%u",
++ HIPQUAD(ip), cidr, NIPQUAD(addr));
++#endif
++
++ return ntohl(addr);
++}
++
++#endif /* __IP_SET_NETHASH_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ip_set_portmap.h
+@@ -0,0 +1,25 @@
++#ifndef __IP_SET_PORTMAP_H
++#define __IP_SET_PORTMAP_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++#define SETTYPE_NAME "portmap"
++#define MAX_RANGE 0x0000FFFF
++#define INVALID_PORT (MAX_RANGE + 1)
++
++struct ip_set_portmap {
++ void *members; /* the portmap proper */
++ ip_set_ip_t first_port; /* host byte order, included in range */
++ ip_set_ip_t last_port; /* host byte order, included in range */
++};
++
++struct ip_set_req_portmap_create {
++ ip_set_ip_t from;
++ ip_set_ip_t to;
++};
++
++struct ip_set_req_portmap {
++ ip_set_ip_t port;
++};
++
++#endif /* __IP_SET_PORTMAP_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_set.h
+@@ -0,0 +1,21 @@
++#ifndef _IPT_SET_H
++#define _IPT_SET_H
++
++#include <linux/netfilter_ipv4/ip_set.h>
++
++struct ipt_set_info {
++ ip_set_id_t index;
++ u_int32_t flags[IP_SET_MAX_BINDINGS + 1];
++};
++
++/* match info */
++struct ipt_set_info_match {
++ struct ipt_set_info match_set;
++};
++
++struct ipt_set_info_target {
++ struct ipt_set_info add_set;
++ struct ipt_set_info del_set;
++};
++
++#endif /*_IPT_SET_H*/
+--- /dev/null
++++ b/net/ipv4/netfilter/ip_set.c
+@@ -0,0 +1,2003 @@
++/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
++ * Patrick Schaaf <bof@bof.de>
++ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/* Kernel module for IP set management */
++
++#include <linux/version.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++#include <linux/config.h>
++#endif
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/kmod.h>
++#include <linux/ip.h>
++#include <linux/skbuff.h>
++#include <linux/random.h>
++#include <linux/jhash.h>
++#include <linux/netfilter_ipv4/ip_tables.h>
++#include <linux/errno.h>
++#include <linux/semaphore.h>
++#include <asm/uaccess.h>
++#include <asm/bitops.h>
++#include <linux/spinlock.h>
++#include <linux/vmalloc.h>
++
++#define ASSERT_READ_LOCK(x)
++#define ASSERT_WRITE_LOCK(x)
++#include <linux/netfilter_ipv4/ip_set.h>
++
++static struct list_head set_type_list; /* all registered sets */
++static struct ip_set **ip_set_list; /* all individual sets */
++static DEFINE_RWLOCK(ip_set_lock); /* protects the lists and the hash */
++static DECLARE_MUTEX(ip_set_app_mutex); /* serializes user access */
++static ip_set_id_t ip_set_max = CONFIG_IP_NF_SET_MAX;
++static ip_set_id_t ip_set_bindings_hash_size = CONFIG_IP_NF_SET_HASHSIZE;
++static struct list_head *ip_set_hash; /* hash of bindings */
++static unsigned int ip_set_hash_random; /* random seed */
++
++/*
++ * Sets are identified either by the index in ip_set_list or by id.
++ * The id never changes and is used to find a key in the hash.
++ * The index may change by swapping and used at all other places
++ * (set/SET netfilter modules, binding value, etc.)
++ *
++ * Userspace requests are serialized by ip_set_mutex and sets can
++ * be deleted only from userspace. Therefore ip_set_list locking
++ * must obey the following rules:
++ *
++ * - kernel requests: read and write locking mandatory
++ * - user requests: read locking optional, write locking mandatory
++ */
++
++static inline void
++__ip_set_get(ip_set_id_t index)
++{
++ atomic_inc(&ip_set_list[index]->ref);
++}
++
++static inline void
++__ip_set_put(ip_set_id_t index)
++{
++ atomic_dec(&ip_set_list[index]->ref);
++}
++
++/*
++ * Binding routines
++ */
++
++static inline struct ip_set_hash *
++__ip_set_find(u_int32_t key, ip_set_id_t id, ip_set_ip_t ip)
++{
++ struct ip_set_hash *set_hash;
++
++ list_for_each_entry(set_hash, &ip_set_hash[key], list)
++ if (set_hash->id == id && set_hash->ip == ip)
++ return set_hash;
++
++ return NULL;
++}
++
++static ip_set_id_t
++ip_set_find_in_hash(ip_set_id_t id, ip_set_ip_t ip)
++{
++ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
++ % ip_set_bindings_hash_size;
++ struct ip_set_hash *set_hash;
++
++ ASSERT_READ_LOCK(&ip_set_lock);
++ IP_SET_ASSERT(ip_set_list[id]);
++ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));
++
++ set_hash = __ip_set_find(key, id, ip);
++
++ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
++ HIPQUAD(ip),
++ set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
++
++ return (set_hash != NULL ? set_hash->binding : IP_SET_INVALID_ID);
++}
++
++static inline void
++__set_hash_del(struct ip_set_hash *set_hash)
++{
++ ASSERT_WRITE_LOCK(&ip_set_lock);
++ IP_SET_ASSERT(ip_set_list[set_hash->binding]);
++
++ __ip_set_put(set_hash->binding);
++ list_del(&set_hash->list);
++ kfree(set_hash);
++}
++
++static int
++ip_set_hash_del(ip_set_id_t id, ip_set_ip_t ip)
++{
++ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
++ % ip_set_bindings_hash_size;
++ struct ip_set_hash *set_hash;
++
++ IP_SET_ASSERT(ip_set_list[id]);
++ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));
++ write_lock_bh(&ip_set_lock);
++ set_hash = __ip_set_find(key, id, ip);
++ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
++ HIPQUAD(ip),
++ set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
++
++ if (set_hash != NULL)
++ __set_hash_del(set_hash);
++ write_unlock_bh(&ip_set_lock);
++ return 0;
++}
++
++static int
++ip_set_hash_add(ip_set_id_t id, ip_set_ip_t ip, ip_set_id_t binding)
++{
++ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
++ % ip_set_bindings_hash_size;
++ struct ip_set_hash *set_hash;
++ int ret = 0;
++
++ IP_SET_ASSERT(ip_set_list[id]);
++ IP_SET_ASSERT(ip_set_list[binding]);
++ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
++ HIPQUAD(ip), ip_set_list[binding]->name);
++ write_lock_bh(&ip_set_lock);
++ set_hash = __ip_set_find(key, id, ip);
++ if (!set_hash) {
++ set_hash = kmalloc(sizeof(struct ip_set_hash), GFP_ATOMIC);
++ if (!set_hash) {
++ ret = -ENOMEM;
++ goto unlock;
++ }
++ INIT_LIST_HEAD(&set_hash->list);
++ set_hash->id = id;
++ set_hash->ip = ip;
++ list_add(&set_hash->list, &ip_set_hash[key]);
++ } else {
++ IP_SET_ASSERT(ip_set_list[set_hash->binding]);
++ DP("overwrite binding: %s",
++ ip_set_list[set_hash->binding]->name);
++ __ip_set_put(set_hash->binding);
++ }
++ set_hash->binding = binding;
++ __ip_set_get(set_hash->binding);
++ DP("stored: key %u, id %u (%s), ip %u.%u.%u.%u, binding %u (%s)",
++ key, id, ip_set_list[id]->name,
++ HIPQUAD(ip), binding, ip_set_list[binding]->name);
++ unlock:
++ write_unlock_bh(&ip_set_lock);
++ return ret;
++}
++
++#define FOREACH_HASH_DO(fn, args...) \
++({ \
++ ip_set_id_t __key; \
++ struct ip_set_hash *__set_hash; \
++ \
++ for (__key = 0; __key < ip_set_bindings_hash_size; __key++) { \
++ list_for_each_entry(__set_hash, &ip_set_hash[__key], list) \
++ fn(__set_hash , ## args); \
++ } \
++})
++
++#define FOREACH_HASH_RW_DO(fn, args...) \
++({ \
++ ip_set_id_t __key; \
++ struct ip_set_hash *__set_hash, *__n; \
++ \
++ ASSERT_WRITE_LOCK(&ip_set_lock); \
++ for (__key = 0; __key < ip_set_bindings_hash_size; __key++) { \
++ list_for_each_entry_safe(__set_hash, __n, &ip_set_hash[__key], list)\
++ fn(__set_hash , ## args); \
++ } \
++})
++
++/* Add, del and test set entries from kernel */
++
++#define follow_bindings(index, set, ip) \
++((index = ip_set_find_in_hash((set)->id, ip)) != IP_SET_INVALID_ID \
++ || (index = (set)->binding) != IP_SET_INVALID_ID)
++
++int
++ip_set_testip_kernel(ip_set_id_t index,
++ const struct sk_buff *skb,
++ const u_int32_t *flags)
++{
++ struct ip_set *set;
++ ip_set_ip_t ip;
++ int res;
++ unsigned char i = 0;
++
++ IP_SET_ASSERT(flags[i]);
++ read_lock_bh(&ip_set_lock);
++ do {
++ set = ip_set_list[index];
++ IP_SET_ASSERT(set);
++ DP("set %s, index %u", set->name, index);
++ read_lock_bh(&set->lock);
++ res = set->type->testip_kernel(set, skb, &ip, flags, i++);
++ read_unlock_bh(&set->lock);
++ i += !!(set->type->features & IPSET_DATA_DOUBLE);
++ } while (res > 0
++ && flags[i]
++ && follow_bindings(index, set, ip));
++ read_unlock_bh(&ip_set_lock);
++
++ return res;
++}
++
++void
++ip_set_addip_kernel(ip_set_id_t index,
++ const struct sk_buff *skb,
++ const u_int32_t *flags)
++{
++ struct ip_set *set;
++ ip_set_ip_t ip;
++ int res;
++ unsigned char i = 0;
++
++ IP_SET_ASSERT(flags[i]);
++ retry:
++ read_lock_bh(&ip_set_lock);
++ do {
++ set = ip_set_list[index];
++ IP_SET_ASSERT(set);
++ DP("set %s, index %u", set->name, index);
++ write_lock_bh(&set->lock);
++ res = set->type->addip_kernel(set, skb, &ip, flags, i++);
++ write_unlock_bh(&set->lock);
++ i += !!(set->type->features & IPSET_DATA_DOUBLE);
++ } while ((res == 0 || res == -EEXIST)
++ && flags[i]
++ && follow_bindings(index, set, ip));
++ read_unlock_bh(&ip_set_lock);
++
++ if (res == -EAGAIN
++ && set->type->retry
++ && (res = set->type->retry(set)) == 0)
++ goto retry;
++}
++
++void
++ip_set_delip_kernel(ip_set_id_t index,
++ const struct sk_buff *skb,
++ const u_int32_t *flags)
++{
++ struct ip_set *set;
++ ip_set_ip_t ip;
++ int res;
++ unsigned char i = 0;
++
++ IP_SET_ASSERT(flags[i]);
++ read_lock_bh(&ip_set_lock);
++ do {
++ set = ip_set_list[index];
++ IP_SET_ASSERT(set);
++ DP("set %s, index %u", set->name, index);
++ write_lock_bh(&set->lock);
++ res = set->type->delip_kernel(set, skb, &ip, flags, i++);
++ write_unlock_bh(&set->lock);
++ i += !!(set->type->features & IPSET_DATA_DOUBLE);
++ } while ((res == 0 || res == -EEXIST)
++ && flags[i]
++ && follow_bindings(index, set, ip));
++ read_unlock_bh(&ip_set_lock);
++}
++
++/* Register and deregister settype */
++
++static inline struct ip_set_type *
++find_set_type(const char *name)
++{
++ struct ip_set_type *set_type;
++
++ list_for_each_entry(set_type, &set_type_list, list)
++ if (!strncmp(set_type->typename, name, IP_SET_MAXNAMELEN - 1))
++ return set_type;
++ return NULL;
++}
++
++int
++ip_set_register_set_type(struct ip_set_type *set_type)
++{
++ int ret = 0;
++
++ if (set_type->protocol_version != IP_SET_PROTOCOL_VERSION) {
++ ip_set_printk("'%s' uses wrong protocol version %u (want %u)",
++ set_type->typename,
++ set_type->protocol_version,
++ IP_SET_PROTOCOL_VERSION);
++ return -EINVAL;
++ }
++
++ write_lock_bh(&ip_set_lock);
++ if (find_set_type(set_type->typename)) {
++ /* Duplicate! */
++ ip_set_printk("'%s' already registered!",
++ set_type->typename);
++ ret = -EINVAL;
++ goto unlock;
++ }
++ if (!try_module_get(THIS_MODULE)) {
++ ret = -EFAULT;
++ goto unlock;
++ }
++ list_add(&set_type->list, &set_type_list);
++ DP("'%s' registered.", set_type->typename);
++ unlock:
++ write_unlock_bh(&ip_set_lock);
++ return ret;
++}
++
++void
++ip_set_unregister_set_type(struct ip_set_type *set_type)
++{
++ write_lock_bh(&ip_set_lock);
++ if (!find_set_type(set_type->typename)) {
++ ip_set_printk("'%s' not registered?",
++ set_type->typename);
++ goto unlock;
++ }
++ list_del(&set_type->list);
++ module_put(THIS_MODULE);
++ DP("'%s' unregistered.", set_type->typename);
++ unlock:
++ write_unlock_bh(&ip_set_lock);
++
++}
++
++/*
++ * Userspace routines
++ */
++
++/*
++ * Find set by name, reference it once. The reference makes sure the
++ * thing pointed to, does not go away under our feet. Drop the reference
++ * later, using ip_set_put().
++ */
++ip_set_id_t
++ip_set_get_byname(const char *name)
++{
++ ip_set_id_t i, index = IP_SET_INVALID_ID;
++
++ down(&ip_set_app_mutex);
++ for (i = 0; i < ip_set_max; i++) {
++ if (ip_set_list[i] != NULL
++ && strcmp(ip_set_list[i]->name, name) == 0) {
++ __ip_set_get(i);
++ index = i;
++ break;
++ }
++ }
++ up(&ip_set_app_mutex);
++ return index;
++}
++
++/*
++ * Find set by index, reference it once. The reference makes sure the
++ * thing pointed to, does not go away under our feet. Drop the reference
++ * later, using ip_set_put().
++ */
++ip_set_id_t
++ip_set_get_byindex(ip_set_id_t index)
++{
++ down(&ip_set_app_mutex);
++
++ if (index >= ip_set_max)
++ return IP_SET_INVALID_ID;
++
++ if (ip_set_list[index])
++ __ip_set_get(index);
++ else
++ index = IP_SET_INVALID_ID;
++
++ up(&ip_set_app_mutex);
++ return index;
++}
++
++/*
++ * If the given set pointer points to a valid set, decrement
++ * reference count by 1. The caller shall not assume the index
++ * to be valid, after calling this function.
++ */
++void ip_set_put(ip_set_id_t index)
++{
++ down(&ip_set_app_mutex);
++ if (ip_set_list[index])
++ __ip_set_put(index);
++ up(&ip_set_app_mutex);
++}
++
++/* Find a set by name or index */
++static ip_set_id_t
++ip_set_find_byname(const char *name)
++{
++ ip_set_id_t i, index = IP_SET_INVALID_ID;
++
++ for (i = 0; i < ip_set_max; i++) {
++ if (ip_set_list[i] != NULL
++ && strcmp(ip_set_list[i]->name, name) == 0) {
++ index
projects / openwrt / svn-archive / archive.git / commitdiff