[brcm-2.4] change switch config to swconfig style format to remain consistent accross...
authorJo-Philipp Wich <jow@openwrt.org>
Sun, 15 Nov 2009 18:43:46 +0000 (18:43 +0000)
committerJo-Philipp Wich <jow@openwrt.org>
Sun, 15 Nov 2009 18:43:46 +0000 (18:43 +0000)
SVN-Revision: 18425

package/switch/files/switch.sh
target/linux/brcm-2.4/base-files/etc/init.d/netconfig

index a787a8c..14bacad 100644 (file)
@@ -1,33 +1,38 @@
 #!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org
+
+setup_switch_hw() {
+       local dev="$1"
+       local enable reset evlan
+
+       config_get_bool enable "$dev" enable 1
+       config_get_bool evlan  "$dev" enable_vlan 1
+       config_get_bool reset  "$dev" reset 1
+
+       local proc="/proc/switch/$dev"
+       [ -d "$proc" ] && {
+               echo "$reset"  > "$proc/reset"
+               echo "$evlan"  > "$proc/enable_vlan"
+               echo "$enable" > "$proc/enable"
+       }
+}
 
 setup_switch_vlan() {
-       DIR="/proc/switch/$CONFIG_SECTION/vlan/$1"
-       [ -d "$DIR" ] || return 0
-       
-       config_get ports "$CONFIG_SECTION" "vlan$1"
-       echo "$ports" > "$DIR/ports"
+       local s="$1"
+       local dev vlan ports
+
+       config_get dev   "$s" device
+       config_get vlan  "$s" vlan
+       config_get ports "$s" ports
+
+       [ -n "$dev" ] && [ -n "$vlan" ] && { 
+               local proc="/proc/switch/$dev/vlan/$vlan/ports"
+               [ -f "$proc" ] && echo "$ports" > "$proc"
+       }
 }
 
 setup_switch() {
-       config_cb() {
-               case "$1" in
-                       switch)
-                               [ -n "$2" -a -d "/proc/switch/$2" ] && {
-                                       echo 1 > "/proc/switch/$2/reset"
-                                       echo 1 > "/proc/switch/$2/enable"
-                                       echo 1 > "/proc/switch/$2/enable_vlan"
-                                       option_cb() {
-                                               case "$1" in
-                                                       vlan*) setup_switch_vlan "${1##vlan}";;
-                                               esac
-                                       }
-                               }
-                       ;;
-                       *)
-                               option_cb() { return 0; }
-                       ;;
-               esac
-       }
        config_load network
+       config_foreach setup_switch_hw switch
+       config_foreach setup_switch_vlan switch_vlan
 }
index 09c7c28..4d66962 100755 (executable)
@@ -20,6 +20,16 @@ start() {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }
 
+       function vlan(id, name) {
+               if (c[name] != "") {
+                       print "config switch_vlan eth0_" id
+                       print " option device   \"eth0\""
+                       print " option vlan     " id
+                       print " option ports    \"" c[name] "\""
+                       print ""
+               }
+       }
+
        function macinc(mac, maca, i, result) {
                split(mac, maca, ":")
                for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
@@ -165,10 +175,10 @@ start() {
                if (c["vlan0ports"] || c["vlan1ports"]) {
                        print "#### VLAN configuration "
                        print "config switch eth0"
-                       p("vlan0", "vlan0ports")
-                       p("vlan1", "vlan1ports")
-                       print ""
-                       print ""
+                       print " option enable   1"
+                       print ""                
+                       vlan(0, "vlan0ports")
+                       vlan(1, "vlan1ports")
                }
                print "#### Loopback configuration"
                print "config interface loopback"