ar71xx: add latch handling code for the RB750

SVN-Revision: 20050

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c
index dd481d9eb92773b3c5e5173ad6c29fdeaf9e77c3..06f48328e4e1235cfef5eef75ba5d423ca5608bb 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c
@@ -9,10 +9,60 @@
  */
 
 #include <asm/mach-ar71xx/ar71xx.h>
  */
 
 #include <asm/mach-ar71xx/ar71xx.h>

+#include <asm/mach-ar71xx/mach-rb750.h>

 
 #include "machtype.h"
 #include "dev-ap91-eth.h"
 
 
 #include "machtype.h"
 #include "dev-ap91-eth.h"
 

+int rb750_latch_change(u32 mask_clr, u32 mask_set)
+{
+       static DEFINE_SPINLOCK(lock);
+       static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
+       static u32 latch_oe;
+       static u32 latch_clr;
+       unsigned long flags;
+       u32 t;
+       int ret = 0;
+
+       spin_lock_irqsave(&lock, flags);
+
+       if ((mask_clr & BIT(31)) != 0 &&
+           (latch_set & RB750_LVC573_LE) == 0) {
+               goto unlock;
+       }
+
+       latch_set = (latch_set | mask_set) & ~mask_clr;
+       latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+       if (latch_oe == 0)
+               latch_oe = __raw_readl(ar71xx_gpio_base + GPIO_REG_OE);
+
+       if (likely(latch_set & RB750_LVC573_LE)) {
+               void __iomem *base = ar71xx_gpio_base;
+
+               t = __raw_readl(base + GPIO_REG_OE);
+               t |= mask_clr | latch_oe | mask_set;
+
+               __raw_writel(t, base + GPIO_REG_OE);
+               __raw_writel(latch_clr, base + GPIO_REG_CLEAR);
+               __raw_writel(latch_set, base + GPIO_REG_SET);
+       } else if (mask_clr & RB750_LVC573_LE) {
+               void __iomem *base = ar71xx_gpio_base;
+
+               latch_oe = __raw_readl(base + GPIO_REG_OE);
+               __raw_writel(RB750_LVC573_LE, base + GPIO_REG_CLEAR);
+               /* flush write */
+               __raw_readl(base + GPIO_REG_CLEAR);
+       }
+
+       ret = 1;
+
+ unlock:
+       spin_unlock_irqrestore(&lock, flags);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(rb750_latch_change);
+

 static void __init rb750_setup(void)
 {
        ap91_eth_init(NULL);
 static void __init rb750_setup(void)
 {
        ap91_eth_init(NULL);

diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/mach-rb750.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/mach-rb750.h
new file mode 100644 (file)
index 0000000..8165da3
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/mach-rb750.h
@@ -0,0 +1,54 @@
+/*
+ *  MikroTik RouterBOARD 750 definitions
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#ifndef _MACH_RB750_H
+#define _MACH_RB750_H
+
+#include <linux/bitops.h>
+
+#define RB750_GPIO_LVC573_LE   0       /* Latch enable on LVC573 */
+#define RB750_GPIO_NAND_IO0    1       /* NAND I/O 0 */
+#define RB750_GPIO_NAND_IO1    2       /* NAND I/O 1 */
+#define RB750_GPIO_NAND_IO2    3       /* NAND I/O 2 */
+#define RB750_GPIO_NAND_IO3    4       /* NAND I/O 3 */
+#define RB750_GPIO_NAND_IO4    5       /* NAND I/O 4 */
+#define RB750_GPIO_NAND_IO5    6       /* NAND I/O 5 */
+#define RB750_GPIO_NAND_IO6    7       /* NAND I/O 6 */
+#define RB750_GPIO_NAND_IO7    8       /* NAND I/O 7 */
+#define RB750_GPIO_NAND_NCE    11      /* NAND Chip Enable (active low) */
+#define RB750_GPIO_NAND_RDY    12      /* NAND Ready */
+#define RB750_GPIO_NAND_CLE    14      /* NAND Command Latch Enable */
+#define RB750_GPIO_NAND_ALE    15      /* NAND Address Latch Enable */
+#define RB750_GPIO_NAND_NRE    16      /* NAND Read Enable (active low) */
+#define RB750_GPIO_NAND_NWE    17      /* NAND Write Enable (active low) */
+
+#define RB750_GPIO_BTN_RESET   1
+#define RB750_GPIO_SPI_CS0     2
+#define RB750_GPIO_LED_ACT     12
+#define RB750_GPIO_LED_PORT1   13
+#define RB750_GPIO_LED_PORT2   14
+#define RB750_GPIO_LED_PORT3   15
+#define RB750_GPIO_LED_PORT4   16
+#define RB750_GPIO_LED_PORT5   17
+
+#define RB750_LED_ACT          BIT(RB750_GPIO_LED_ACT)
+#define RB750_LED_PORT1                BIT(RB750_GPIO_LED_PORT1)
+#define RB750_LED_PORT2                BIT(RB750_GPIO_LED_PORT2)
+#define RB750_LED_PORT3                BIT(RB750_GPIO_LED_PORT3)
+#define RB750_LED_PORT4                BIT(RB750_GPIO_LED_PORT4)
+#define RB750_LED_PORT5                BIT(RB750_GPIO_LED_PORT5)
+
+#define RB750_LVC573_LE                BIT(RB750_GPIO_LVC573_LE)
+
+#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
+                        RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+
+int rb750_latch_change(u32 mask_clr, u32 mask_set);
+
+#endif /* _MACH_RB750_H */
\ No newline at end of file