[brcm-2.4] fix vlan configuration on Dell TrueMobile 2300
authorGabor Juhos <juhosg@openwrt.org>
Tue, 25 Sep 2007 08:34:30 +0000 (08:34 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Tue, 25 Sep 2007 08:34:30 +0000 (08:34 +0000)
SVN-Revision: 9015

target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig

index 2b56963..643ba35 100755 (executable)
@@ -47,11 +47,11 @@ start() {
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }
-       
+
        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }
-       
+
        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""
@@ -61,6 +61,10 @@ start() {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }
+               if (model == "Dell TrueMobile 2300") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"
@@ -100,10 +104,10 @@ start() {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }
-       
+
                # ASUS WL-700gE
                # These are actually same as defaults above. For some reason this script applies
-               # Generic BCM94704 settings instead so we revert to proper settings here.       
+               # Generic BCM94704 settings instead so we revert to proper settings here.
                # Hopefully someone will fix this properly soon.
                if (model == "ASUS WL-700gE") {
                        c["lan_ifname"]="eth0.0"
@@ -116,7 +120,7 @@ start() {
                        c["vlan0ports"]="0 1 2 3 5*"
                        c["vlan1ports"]="4 5"
                }
-               
+
                print "#### VLAN configuration "
                print "config switch eth0"
                p("vlan0", "vlan0ports")