+++ /dev/null
-/*
- * ADM5120 generic GPIO API support via GPIOLIB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <generated/autoconf.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-struct gpio1_desc {
- void __iomem *reg; /* register address */
- u8 iv_shift; /* shift amount for input bit */
- u8 mode_shift; /* shift amount for mode bits */
-};
-
-#define GPIO1_DESC(p, l) { \
- .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)), \
- .iv_shift = LED0_IV_SHIFT + (l), \
- .mode_shift = (l) * 4 \
- }
-
-static struct gpio1_desc gpio1_table[15] = {
- GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
- GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
- GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
- GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
- GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
-};
-
-static u32 gpio_conf2;
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
- int ret;
-
- switch (gpio) {
- case ADM5120_GPIO_PIN2:
- ret = ADM5120_IRQ_GPIO2;
- break;
- case ADM5120_GPIO_PIN4:
- ret = ADM5120_IRQ_GPIO4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
- int ret;
-
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- ret = ADM5120_GPIO_PIN2;
- break;
- case ADM5120_IRQ_GPIO4:
- ret = ADM5120_GPIO_PIN4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-int __adm5120_gpio0_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if ((t & PIN_IM(offset)) != 0)
- t &= PIN_IV(offset);
- else
- t &= PIN_OV(offset);
-
- return (t) ? 1 : 0;
-}
-EXPORT_SYMBOL(__adm5120_gpio0_get_value);
-
-void __adm5120_gpio0_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if (value == 0)
- t &= ~(PIN_OV(offset));
- else
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio0_set_value);
-
-static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio0_get_value(offset);
-}
-
-static void adm5120_gpio0_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio0_set_value(offset, value);
-}
-
-static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_OE(offset));
- t |= PIN_IM(offset);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_IM(offset) | PIN_OV(offset));
- t |= PIN_OE(offset);
-
- if (value)
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio0_chip = {
- .label = "adm5120 gpio0",
- .get = adm5120_gpio0_get_value,
- .set = adm5120_gpio0_set_value,
- .direction_input = adm5120_gpio0_direction_input,
- .direction_output = adm5120_gpio0_direction_output,
- .base = ADM5120_GPIO_PIN0,
- .ngpio = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
-};
-
-int __adm5120_gpio1_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t, m;
-
- reg = gpio1_table[offset].reg;
-
- t = __raw_readl(reg);
- m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
- if (m == LED_MODE_INPUT)
- return (t >> gpio1_table[offset].iv_shift) & 1;
-
- if (m == LED_MODE_OUT_LOW)
- return 0;
-
- return 1;
-}
-EXPORT_SYMBOL(__adm5120_gpio1_get_value);
-
-void __adm5120_gpio1_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t, s;
-
- reg = gpio1_table[offset].reg;
- s = gpio1_table[offset].mode_shift;
-
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << s);
-
- switch (value) {
- case ADM5120_GPIO_LOW:
- t |= (LED_MODE_OUT_LOW << s);
- break;
- case ADM5120_GPIO_FLASH:
- case ADM5120_GPIO_LINK:
- case ADM5120_GPIO_SPEED:
- case ADM5120_GPIO_DUPLEX:
- case ADM5120_GPIO_ACT:
- case ADM5120_GPIO_COLL:
- case ADM5120_GPIO_LINK_ACT:
- case ADM5120_GPIO_DUPLEX_COLL:
- case ADM5120_GPIO_10M_ACT:
- case ADM5120_GPIO_100M_ACT:
- t |= ((value & LED_MODE_MASK) << s);
- break;
- default:
- t |= (LED_MODE_OUT_HIGH << s);
- break;
- }
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio1_set_value);
-
-static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio1_get_value(offset);
-}
-
-static void adm5120_gpio1_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
-}
-
-static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = gpio1_table[offset].reg;
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio1_chip = {
- .label = "adm5120 gpio1",
- .get = adm5120_gpio1_get_value,
- .set = adm5120_gpio1_set_value,
- .direction_input = adm5120_gpio1_direction_input,
- .direction_output = adm5120_gpio1_direction_output,
- .base = ADM5120_GPIO_P0L0,
- .ngpio = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
-};
-
-void __init adm5120_gpio_csx0_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX0;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN1, "CSX0");
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX1;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN3, "CSX1");
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_EW;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN0, "EW");
-}
-
-void __init adm5120_gpio_init(void)
-{
- int err;
-
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- if (adm5120_package_pqfp()) {
- gpiochip_reserve(ADM5120_GPIO_PIN4, 4);
- adm5120_gpio0_chip.ngpio = 4;
- }
-
- err = gpiochip_add(&adm5120_gpio0_chip);
- if (err)
- panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
-
- err = gpiochip_add(&adm5120_gpio1_chip);
- if (err)
- panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
-
-}
+++ /dev/null
-/*
- * ZyXEL's Bootbase specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
- u32 t;
-
- t = prom_read_be32(data+5);
- if (t != ZYNOS_MAGIC_DBGAREA1)
- return 0;
-
- t = prom_read_be32(data+9);
- if (t != ZYNOS_MAGIC_DBGAREA2)
- return 0;
-
- return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
- return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline void bootbase_get_mac(u8 *mac)
-{
- int i;
-
- for (i = 0; i < 6; i++)
- mac[i] = board_info->mac[i];
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
- unsigned char vendor[ZYNOS_NAME_LEN];
- int i;
-
- for (i = 0; i < ZYNOS_NAME_LEN; i++)
- vendor[i] = board_info->vendor[i];
-
- if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
- return ZYNOS_VENDOR_ID_ZYXEL;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
- return ZYNOS_VENDOR_ID_DLINK;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
- return ZYNOS_VENDOR_ID_LUCENT;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
- return ZYNOS_VENDOR_ID_NETGEAR;
-
- return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
- return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
- u32 t;
-
- if (bootbase_found)
- goto out;
-
- /* check presence of the dbgarea */
- if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
- goto out;
-
- board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
- /* check for a valid BootExt address */
- t = bootbase_get_bootext_addr();
- if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
- goto out;
-
- bootbase_info.vendor_id = bootbase_get_vendor_id();
- bootbase_info.board_id = bootbase_get_board_id();
- bootbase_get_mac(bootbase_info.mac);
-
- bootbase_found = 1;
-
-out:
- return bootbase_found;
-}
-
+++ /dev/null
-/*
- * Compex's MyLoader specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
- int i;
-
- if (myloader_found)
- goto out;
-
- sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
- boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
- parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
- /* Check for some magic numbers */
- if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
- (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
- (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
- goto out;
-
- myloader_info.vid = le32_to_cpu(sysp->vid);
- myloader_info.did = le32_to_cpu(sysp->did);
- myloader_info.svid = le32_to_cpu(sysp->svid);
- myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
- for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
- int j;
- for (j = 0; j < 6; j++)
- myloader_info.macs[i][j] = boardp->addr[i].mac[j];
- }
-
- myloader_found = 1;
-
-out:
- return myloader_found;
-}
+++ /dev/null
-/*
- * Mikrotik's RouterBOOT specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
- u16 id, len;
-
- memset(&rb_hs, 0, sizeof(rb_hs));
-
- if (buflen < 4)
- return -1;
-
- if (prom_read_le32(buf) != RB_MAGIC_HARD)
- return -1;
-
- /* skip magic value */
- buf += 4;
- buflen -= 4;
-
- while (buflen > 2) {
- id = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
- if (id == RB_ID_TERMINATOR || buflen < 2)
- break;
-
- len = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < len)
- break;
-
- switch (id) {
- case RB_ID_BIOS_VERSION:
- rb_hs.bios_ver = (char *)buf;
- break;
- case RB_ID_BOARD_NAME:
- rb_hs.name = (char *)buf;
- break;
- case RB_ID_MEMORY_SIZE:
- rb_hs.mem_size = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_COUNT:
- rb_hs.mac_count = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_PACK:
- if ((len / RB_MAC_SIZE) > 0)
- rb_hs.mac_base = buf;
- break;
- }
-
- buf += len;
- buflen -= len;
-
- }
-
- return 0;
-}
-
-#define RB_BS_OFFS 0x14
-#define RB_OFFS_MAX (128*1024)
-
-int __init routerboot_present(void)
-{
- struct rb_bios_settings *bs;
- u8 *base;
- u32 off, len;
-
- if (rb_found)
- goto out;
-
- base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
- bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
- off = prom_read_le32(&bs->hs_offs);
- len = prom_read_le32(&bs->hs_size);
- if (off > RB_OFFS_MAX)
- goto out;
-
- if (routerboot_load_hs(base+off, len) != 0)
- goto out;
-
- rb_found = 1;
-
-out:
- return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
- if (rb_found == 0)
- return NULL;
-
- return rb_hs.name;
-}
+++ /dev/null
-/*
- * ADM5120 generic GPIO API support via GPIOLIB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <generated/autoconf.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-struct gpio1_desc {
- void __iomem *reg; /* register address */
- u8 iv_shift; /* shift amount for input bit */
- u8 mode_shift; /* shift amount for mode bits */
-};
-
-#define GPIO1_DESC(p, l) { \
- .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)), \
- .iv_shift = LED0_IV_SHIFT + (l), \
- .mode_shift = (l) * 4 \
- }
-
-static struct gpio1_desc gpio1_table[15] = {
- GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
- GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
- GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
- GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
- GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
-};
-
-static u32 gpio_conf2;
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
- int ret;
-
- switch (gpio) {
- case ADM5120_GPIO_PIN2:
- ret = ADM5120_IRQ_GPIO2;
- break;
- case ADM5120_GPIO_PIN4:
- ret = ADM5120_IRQ_GPIO4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
- int ret;
-
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- ret = ADM5120_GPIO_PIN2;
- break;
- case ADM5120_IRQ_GPIO4:
- ret = ADM5120_GPIO_PIN4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-int __adm5120_gpio0_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if ((t & PIN_IM(offset)) != 0)
- t &= PIN_IV(offset);
- else
- t &= PIN_OV(offset);
-
- return (t) ? 1 : 0;
-}
-EXPORT_SYMBOL(__adm5120_gpio0_get_value);
-
-void __adm5120_gpio0_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if (value == 0)
- t &= ~(PIN_OV(offset));
- else
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio0_set_value);
-
-static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio0_get_value(offset);
-}
-
-static void adm5120_gpio0_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio0_set_value(offset, value);
-}
-
-static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_OE(offset));
- t |= PIN_IM(offset);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_IM(offset) | PIN_OV(offset));
- t |= PIN_OE(offset);
-
- if (value)
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio0_chip = {
- .label = "adm5120 gpio0",
- .get = adm5120_gpio0_get_value,
- .set = adm5120_gpio0_set_value,
- .direction_input = adm5120_gpio0_direction_input,
- .direction_output = adm5120_gpio0_direction_output,
- .base = ADM5120_GPIO_PIN0,
- .ngpio = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
-};
-
-int __adm5120_gpio1_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t, m;
-
- reg = gpio1_table[offset].reg;
-
- t = __raw_readl(reg);
- m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
- if (m == LED_MODE_INPUT)
- return (t >> gpio1_table[offset].iv_shift) & 1;
-
- if (m == LED_MODE_OUT_LOW)
- return 0;
-
- return 1;
-}
-EXPORT_SYMBOL(__adm5120_gpio1_get_value);
-
-void __adm5120_gpio1_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t, s;
-
- reg = gpio1_table[offset].reg;
- s = gpio1_table[offset].mode_shift;
-
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << s);
-
- switch (value) {
- case ADM5120_GPIO_LOW:
- t |= (LED_MODE_OUT_LOW << s);
- break;
- case ADM5120_GPIO_FLASH:
- case ADM5120_GPIO_LINK:
- case ADM5120_GPIO_SPEED:
- case ADM5120_GPIO_DUPLEX:
- case ADM5120_GPIO_ACT:
- case ADM5120_GPIO_COLL:
- case ADM5120_GPIO_LINK_ACT:
- case ADM5120_GPIO_DUPLEX_COLL:
- case ADM5120_GPIO_10M_ACT:
- case ADM5120_GPIO_100M_ACT:
- t |= ((value & LED_MODE_MASK) << s);
- break;
- default:
- t |= (LED_MODE_OUT_HIGH << s);
- break;
- }
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio1_set_value);
-
-static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio1_get_value(offset);
-}
-
-static void adm5120_gpio1_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
-}
-
-static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = gpio1_table[offset].reg;
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio1_chip = {
- .label = "adm5120 gpio1",
- .get = adm5120_gpio1_get_value,
- .set = adm5120_gpio1_set_value,
- .direction_input = adm5120_gpio1_direction_input,
- .direction_output = adm5120_gpio1_direction_output,
- .base = ADM5120_GPIO_P0L0,
- .ngpio = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
-};
-
-void __init adm5120_gpio_csx0_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX0;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN1, "CSX0");
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX1;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN3, "CSX1");
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_EW;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN0, "EW");
-}
-
-void __init adm5120_gpio_init(void)
-{
- int err;
-
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- if (adm5120_package_pqfp()) {
- gpiochip_reserve(ADM5120_GPIO_PIN4, 4);
- adm5120_gpio0_chip.ngpio = 4;
- }
-
- err = gpiochip_add(&adm5120_gpio0_chip);
- if (err)
- panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
-
- err = gpiochip_add(&adm5120_gpio1_chip);
- if (err)
- panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
-
-}
+++ /dev/null
-/*
- * ZyXEL's Bootbase specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
- u32 t;
-
- t = prom_read_be32(data+5);
- if (t != ZYNOS_MAGIC_DBGAREA1)
- return 0;
-
- t = prom_read_be32(data+9);
- if (t != ZYNOS_MAGIC_DBGAREA2)
- return 0;
-
- return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
- return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline void bootbase_get_mac(u8 *mac)
-{
- int i;
-
- for (i = 0; i < 6; i++)
- mac[i] = board_info->mac[i];
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
- unsigned char vendor[ZYNOS_NAME_LEN];
- int i;
-
- for (i = 0; i < ZYNOS_NAME_LEN; i++)
- vendor[i] = board_info->vendor[i];
-
- if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
- return ZYNOS_VENDOR_ID_ZYXEL;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
- return ZYNOS_VENDOR_ID_DLINK;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
- return ZYNOS_VENDOR_ID_LUCENT;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
- return ZYNOS_VENDOR_ID_NETGEAR;
-
- return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
- return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
- u32 t;
-
- if (bootbase_found)
- goto out;
-
- /* check presence of the dbgarea */
- if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
- goto out;
-
- board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
- /* check for a valid BootExt address */
- t = bootbase_get_bootext_addr();
- if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
- goto out;
-
- bootbase_info.vendor_id = bootbase_get_vendor_id();
- bootbase_info.board_id = bootbase_get_board_id();
- bootbase_get_mac(bootbase_info.mac);
-
- bootbase_found = 1;
-
-out:
- return bootbase_found;
-}
-
+++ /dev/null
-/*
- * Compex's MyLoader specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
- int i;
-
- if (myloader_found)
- goto out;
-
- sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
- boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
- parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
- /* Check for some magic numbers */
- if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
- (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
- (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
- goto out;
-
- myloader_info.vid = le32_to_cpu(sysp->vid);
- myloader_info.did = le32_to_cpu(sysp->did);
- myloader_info.svid = le32_to_cpu(sysp->svid);
- myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
- for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
- int j;
- for (j = 0; j < 6; j++)
- myloader_info.macs[i][j] = boardp->addr[i].mac[j];
- }
-
- myloader_found = 1;
-
-out:
- return myloader_found;
-}
+++ /dev/null
-/*
- * Mikrotik's RouterBOOT specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <generated/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
- u16 id, len;
-
- memset(&rb_hs, 0, sizeof(rb_hs));
-
- if (buflen < 4)
- return -1;
-
- if (prom_read_le32(buf) != RB_MAGIC_HARD)
- return -1;
-
- /* skip magic value */
- buf += 4;
- buflen -= 4;
-
- while (buflen > 2) {
- id = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
- if (id == RB_ID_TERMINATOR || buflen < 2)
- break;
-
- len = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < len)
- break;
-
- switch (id) {
- case RB_ID_BIOS_VERSION:
- rb_hs.bios_ver = (char *)buf;
- break;
- case RB_ID_BOARD_NAME:
- rb_hs.name = (char *)buf;
- break;
- case RB_ID_MEMORY_SIZE:
- rb_hs.mem_size = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_COUNT:
- rb_hs.mac_count = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_PACK:
- if ((len / RB_MAC_SIZE) > 0)
- rb_hs.mac_base = buf;
- break;
- }
-
- buf += len;
- buflen -= len;
-
- }
-
- return 0;
-}
-
-#define RB_BS_OFFS 0x14
-#define RB_OFFS_MAX (128*1024)
-
-int __init routerboot_present(void)
-{
- struct rb_bios_settings *bs;
- u8 *base;
- u32 off, len;
-
- if (rb_found)
- goto out;
-
- base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
- bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
- off = prom_read_le32(&bs->hs_offs);
- len = prom_read_le32(&bs->hs_size);
- if (off > RB_OFFS_MAX)
- goto out;
-
- if (routerboot_load_hs(base+off, len) != 0)
- goto out;
-
- rb_found = 1;
-
-out:
- return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
- if (rb_found == 0)
- return NULL;
-
- return rb_hs.name;
-}
*
*/
-#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
*/
#include <linux/types.h>
-#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
*/
#include <linux/types.h>
-#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
*/
#include <linux/types.h>
-#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
projects / openwrt / svn-archive / archive.git / commitdiff