Copy hardware docs from trunk to a general docs/ repository
authorFlorian Fainelli <florian@openwrt.org>
Wed, 27 Sep 2006 11:21:53 +0000 (11:21 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Wed, 27 Sep 2006 11:21:53 +0000 (11:21 +0000)
SVN-Revision: 4860

67 files changed:
hardware/4g/accesscube/cpuinfo.txt [new file with mode: 0644]
hardware/4g/accesscube/dmesg-2_4_27.txt [new file with mode: 0644]
hardware/4g/accesscube/info.txt [new file with mode: 0644]
hardware/4g/accesscube/lspci-vv.txt [new file with mode: 0644]
hardware/4g/accesscube/pci.txt [new file with mode: 0644]
hardware/README.txt [new file with mode: 0644]
hardware/asus/wl-500g/cpuinfo.txt [new file with mode: 0644]
hardware/asus/wl-500g/dmesg-2_4_20.txt [new file with mode: 0644]
hardware/asus/wl-500g/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/asus/wl-500g/info.txt [new file with mode: 0644]
hardware/asus/wl-500g/nvram.txt [new file with mode: 0644]
hardware/asus/wl-500g/pci.txt [new file with mode: 0644]
hardware/asus/wl-500gd/cfe.txt [new file with mode: 0644]
hardware/asus/wl-500gd/cpuinfo.txt [new file with mode: 0644]
hardware/asus/wl-500gd/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/asus/wl-500gd/info.txt [new file with mode: 0644]
hardware/asus/wl-500gd/nvram.txt [new file with mode: 0644]
hardware/asus/wl-500gd/pci.txt [new file with mode: 0644]
hardware/buffalo/wbr2-g54/cpuinfo.txt [new file with mode: 0644]
hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/buffalo/wbr2-g54/info.txt [new file with mode: 0644]
hardware/buffalo/wbr2-g54/nvram.txt [new file with mode: 0644]
hardware/buffalo/wbr2-g54/pci.txt [new file with mode: 0644]
hardware/buffalo/wla2-g54l/cpuinfo.txt [new file with mode: 0644]
hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/buffalo/wla2-g54l/info.txt [new file with mode: 0644]
hardware/buffalo/wla2-g54l/nvram.txt [new file with mode: 0644]
hardware/buffalo/wla2-g54l/pci.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/cpuinfo.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/ifconfig.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/info.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/lspci-vv.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/nvram.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v11/pci.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/cpuinfo.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/ifconfig.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/info.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/nvram.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v20/pci.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/cpuinfo.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/ifconfig.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/info.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/nvram.txt [new file with mode: 0644]
hardware/linksys/wrt54g_v22/pci.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/cpuinfo.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/ifconfig.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/info.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/nvram.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v10/pci.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v11/cpuinfo.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v11/info.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v11/nvram.txt [new file with mode: 0644]
hardware/linksys/wrt54gs_v11/pci.txt [new file with mode: 0644]
hardware/motorola/WR850Gv2/cpuinfo.txt [new file with mode: 0755]
hardware/motorola/WR850Gv2/dmesg-2-4-29.txt [new file with mode: 0755]
hardware/motorola/WR850Gv2/ifconfig.txt [new file with mode: 0755]
hardware/motorola/WR850Gv2/nvram.txt [new file with mode: 0755]
hardware/motorola/WR850Gv2/pci.txt [new file with mode: 0755]
hardware/soekris/net4801/cpuinfo.txt [new file with mode: 0644]
hardware/soekris/net4801/dmesg-2.4.30.txt [new file with mode: 0644]
hardware/soekris/net4801/info.txt [new file with mode: 0644]
hardware/soekris/net4801/pci.txt [new file with mode: 0644]

diff --git a/hardware/4g/accesscube/cpuinfo.txt b/hardware/4g/accesscube/cpuinfo.txt
new file mode 100644 (file)
index 0000000..f3489a3
--- /dev/null
@@ -0,0 +1,11 @@
+system type             : MTX-1
+processor               : 0
+cpu model               : Au1500 V0.2
+BogoMIPS                : 395.67
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : yes
+hardware watchpoint     : yes
+VCED exceptions         : not available
+VCEI exceptions         : not available
diff --git a/hardware/4g/accesscube/dmesg-2_4_27.txt b/hardware/4g/accesscube/dmesg-2_4_27.txt
new file mode 100644 (file)
index 0000000..31daebf
--- /dev/null
@@ -0,0 +1,86 @@
+CPU revision is: 01030202
+Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
+Primary data cache 16kB, 4-way, linesize 32 bytes.
+Linux version 2.4.27 (rhandorf@devel) (gcc version 3.3.4) #1 Mon Dec 5
+15:55:07 EST 2005
+4G Systems MTX-1 Board
+Au1500 AD (PRId 01030202) @ 396MHZ
+BCLK switching enabled!
+Determined physical RAM map:
+ memory: 04000000 @ 00000000 (usable)
+On node 0 totalpages: 16384
+zone(0): 16384 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock/0 console=ttyS0,115200
+usb_ohci=base:0x10100000,len:0x100000,irq:26
+calculating r4koff... 003c6cc0(3960000)
+CPU frequency 396.00 MHz
+Calibrating delay loop... 395.67 BogoMIPS
+Memory: 61504k/65536k available (1769k kernel code, 4032k reserved, 260k data,
+88k init, 0k highmem)
+Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
+Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
+Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+Autoconfig PCI channel 0x80316838
+Scanning bus 00, I/O 0x00000300:0x00100000, Mem 0x40000000:0x50000000
+00:00.0 Class 0200: 168c:001b (rev 01)
+        Mem at 0x40000000 [size=0x10000]
+00:01.0 Class 0200: 168c:001b (rev 01)
+        Mem at 0x40010000 [size=0x10000]
+Non-coherent PCI accesses enabled
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
+pty: 256 Unix98 ptys configured
+Serial driver version 1.01 (2001-02-08) with no serial options enabled
+ttyS00 at 0xb1100000 (irq = 0) is a 16550
+ttyS01 at 0xb1400000 (irq = 3) is a 16550
+loop: loaded (max 8 devices)
+au1000eth.c:1.4 ppopov@mvista.com
+eth0: Au1x Ethernet found at 0xb1500000, irq 28
+eth0: LSI 80227 10/100 BaseT PHY at phy address 31
+eth0: Using LSI 80227 10/100 BaseT PHY as default
+MTX-1 flash: probing 32-bit flash bus at 1e000000
+MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit mode
+ Amd/Fujitsu Extended Query Table at 0x0040
+MTX-1 flash: CFI does not contain boot bank location. Assuming top.
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
+Creating 4 MTD partitions on "MTX-1 flash":
+0x00000000-0x01c00000 : "user fs"
+0x01c00000-0x01d00000 : "yamon"
+0x01d00000-0x01fc0000 : "raw kernel"
+0x01fc0000-0x02000000 : "yamon environment"
+usb.c: registered new driver usbdevfs
+usb.c: registered new driver hub
+host/usb-ohci.c: USB OHCI at membase 0xb0100000, IRQ 26
+host/usb-ohci.c: usb-builtin, non-PCI OHCI
+usb.c: new USB bus registered, assigned bus number 1
+hub.c: USB hub found
+hub.c: 2 ports detected
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 4096 bind 8192)
+Linux IP multicast router 0.06 plus PIM-SM
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+MTX-1 watchdog driver
+MTX-1 System Button driver
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+eth0: link up
+eth0: going to full duplex
diff --git a/hardware/4g/accesscube/info.txt b/hardware/4g/accesscube/info.txt
new file mode 100644 (file)
index 0000000..2f82f53
--- /dev/null
@@ -0,0 +1,21 @@
+4G Systems Access Cube
+
+Online description from 4G systems :
+http://www.accesscube.com
+
+CPU: AMD Alchemy 1500 @ 400 Mhz
+RAM: 64 MB
+Flash: 
+serial port possible
+JTAG port possible
+Mini-PCI slot expansions
+Delivered with 2x 6th generation Atheros Wireless Cards
+
+List of files:
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.27)
+pci.txt: contents of /proc/pci (2.4.27)
+dmesg-2_4_27.txt: dmesg from 2.4.27 kernel
+lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported)
+
+--
+florian
diff --git a/hardware/4g/accesscube/lspci-vv.txt b/hardware/4g/accesscube/lspci-vv.txt
new file mode 100644 (file)
index 0000000..1e06cc6
--- /dev/null
@@ -0,0 +1,28 @@
+00:00.0 Class 0200: 168c:001b (rev 01)
+        Subsystem: 168c:2063
+        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
+Stepping- SERR- FastB2B-
+        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
+<TAbort- <MAbort- >SERR- <PERR-
+        Latency: 128 (2500ns min, 7000ns max)
+        Interrupt: pin A routed to IRQ 1
+        Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=64K]
+        Capabilities: [44] Power Management version 2
+                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
+PME(D0-,D1-,D2-,D3hot-,D3cold-)
+                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
+
+00:01.0 Class 0200: 168c:001b (rev 01)
+        Subsystem: 168c:2063
+        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
+Stepping- SERR- FastB2B-
+        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
+<TAbort- <MAbort- >SERR- <PERR-
+        Latency: 128 (2500ns min, 7000ns max)
+        Interrupt: pin A routed to IRQ 2
+        Region 0: Memory at 40010000 (32-bit, non-prefetchable) [size=64K]
+        Capabilities: [44] Power Management version 2
+                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
+PME(D0-,D1-,D2-,D3hot-,D3cold-)
+                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
+
diff --git a/hardware/4g/accesscube/pci.txt b/hardware/4g/accesscube/pci.txt
new file mode 100644 (file)
index 0000000..70f56f3
--- /dev/null
@@ -0,0 +1,11 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Ethernet controller: PCI device 168c:001b (rev 1).
+      IRQ 1.
+      Master Capable.  Latency=128.  Min Gnt=10.Max Lat=28.
+      Non-prefetchable 32 bit memory at 0x40000000 [0x4000ffff].
+  Bus  0, device   1, function  0:
+    Ethernet controller: PCI device 168c:001b (rev 1).
+      IRQ 2.
+      Master Capable.  Latency=128.  Min Gnt=10.Max Lat=28.
+      Non-prefetchable 32 bit memory at 0x40010000 [0x4001ffff].
diff --git a/hardware/README.txt b/hardware/README.txt
new file mode 100644 (file)
index 0000000..03d4f7a
--- /dev/null
@@ -0,0 +1,6 @@
+Some kind of hardware documentation.
+Please add a file info.txt, which gives a short overview about
+the hardware model and a index for all other files with a short
+summary.
+
+
diff --git a/hardware/asus/wl-500g/cpuinfo.txt b/hardware/asus/wl-500g/cpuinfo.txt
new file mode 100644 (file)
index 0000000..e55c6a8
--- /dev/null
@@ -0,0 +1,18 @@
+Kernel 2.4.20:
+
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM4710 V0.0
+BogoMIPS                : 82.94
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
+dcache hits             : 1812757215
+dcache misses           : 37175536
+icache hits             : 2463115376
+icache misses           : 148040459
+instructions            : 2612072141
diff --git a/hardware/asus/wl-500g/dmesg-2_4_20.txt b/hardware/asus/wl-500g/dmesg-2_4_20.txt
new file mode 100644 (file)
index 0000000..d2c4c21
--- /dev/null
@@ -0,0 +1,78 @@
+CPU revision is: 00024000
+Loading BCM4710 MMU routines.
+Primary instruction cache 8kb, linesize 16 bytes (2 ways)
+Primary data cache 4kb, linesize 16 bytes (2 ways)
+Linux version 2.4.20 (mbm@reboot2.lan) (gcc version 3.3.3) #1 Wed Feb 2 04:14:00 EST 2005
+Determined physical RAM map:
+memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4710 rev 0 at 125 MHz
+!unable to setup serial console!
+Calibrating delay loop... 82.94 BogoMIPS
+Memory: 14188k/16384k available (1411k kernel code, 2196k reserved, 100k data, 68k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Amd/Fujitsu Extended Query Table v1.0 at 0x0040
+Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table.
+Physically mapped flash: Swapping erase regions for broken CFI table.
+number of CFI chips: 1
+Flash device: 0x400000 at 0x1fc00000
+Physically mapped flash: squashfs filesystem found at block 914
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000e49b0-0x001b71a1 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x001c0000-0x003f0000 : "OpenWrt"
+sflash: chipcommon not found
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
+ip_conntrack_pptp version 1.9 loaded
+ip_nat_pptp version 1.5 loaded
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 68k freed
+Warning: unable to open an initial console.
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 0000041a
+using v1 hardware
+jffs2.bbc: SIZE compression mode activated.
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
+eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
+PCI: Enabling device 01:02.0 (0004 -> 0006)
+eth2: Broadcom BCM43XX 802.11 Wireless Controller  3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004)
+device eth0 entered promiscuous mode
diff --git a/hardware/asus/wl-500g/dmesg-2_4_29.txt b/hardware/asus/wl-500g/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..20e1c95
--- /dev/null
@@ -0,0 +1,95 @@
+CPU revision is: 00024000
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005
+Determined physical RAM map:
+memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4710 rev 0 at 125 MHz
+Using 62.400 MHz high precision timer.
+!unable to setup serial console!
+Calibrating delay loop... 82.94 BogoMIPS
+Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Setting latency timer of device 01:00.0 to 64
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Amd/Fujitsu Extended Query Table v1.0 at 0x0040
+Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table.
+Physically mapped flash: Swapping erase regions for broken CFI table.
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1fc00000
+Physically mapped flash: squashfs filesystem found at block 946
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000ec990-0x001ceb48 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x001d0000-0x003f0000 : "OpenWrt"
+sflash: chipcommon not found
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Warning: unable to open an initial console.
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 0000041a
+using v1 hardware
+led -> 00
+led -> 01
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:08.0 to 64
+5325E   phy=FFFFFFFF
+eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 01:02.0 to 64
+PCI: Enabling device 01:02.0 (0004 -> 0006)
+eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+device eth2 entered promiscuous mode
+eth2: attempt to add interface with same source address.
+br0: port 2(eth2) entering learning state
+br0: port 1(eth0) entering learning state
+br0: port 2(eth2) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(eth0) entering forwarding state
+br0: topology change detected, propagating
+led -> 00
diff --git a/hardware/asus/wl-500g/info.txt b/hardware/asus/wl-500g/info.txt
new file mode 100644 (file)
index 0000000..cae6860
--- /dev/null
@@ -0,0 +1,21 @@
+Asus WL-500g
+
+Online Description from Asus:
+http://www.asus.com/products/communication/wireless/wl-500g/overview.htm
+
+CPU: BCM4710 at 125 MHz
+RAM: 16 MB
+Flash: 4 MB
+2 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM43XX 802.11 Wireless Controller 
+USB 1.1
+parallel port
+no serial
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.20)
+pci.txt:  contents of /proc/pci (2.4.20)
+dmesg-2_4_20.txt: dmesg from Kernel 2.4.20
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/hardware/asus/wl-500g/nvram.txt b/hardware/asus/wl-500g/nvram.txt
new file mode 100644 (file)
index 0000000..a9a8ba0
--- /dev/null
@@ -0,0 +1,81 @@
+The content of the original nvram after flashing with OpenWRT:
+
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=on
+et0macaddr=00:11:D8:18:B9:08
+wl0_wep_buf=
+watchdog=3000
+boot_wait=on
+wl0_macmode1=disabled
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+pmon_ver=PMON 3.11.19.0
+wl0_ifname=eth2
+wl0_mode=ap
+os_flash_addr=bfc40000
+wl0_gmode=1
+boardtype=bcm94710dev
+et1macaddr=00:11:D8:18:B9:08
+wl0_wep_last=
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=linksys
+et1mdcport=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl0_radioids=BCM2050
+wl0_phytype=g
+wl0_lazywds=1
+wl0_antdiv=-1
+wl0_wpa_psk=
+wl0_mac_list=
+wl0_unit=0
+wl_country_code=AU
+wl0_wds=
+wl0_radius_port=1812
+wl0_mac_deny=
+wl0_auth=0
+wl0_radius_ipaddr=
+lan_ipaddr=192.168.1.1
+clkfreq=125
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=off
+sdram_config=0x0000
+wl0_country=Worldwide
+scratch=a0180000
+wl0_rateset=default
+wl0_wep_bit=64
+wl0_afterburner_override=-1
+sdram_refresh=0x8040
+sdram_ncdl=0x00000000
+hardware_version=WL500-02-02-01-00
+wl0_passphrase=
+wl0_rts=2347
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+wl0_active_mac=
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:11:D8:18:B9:08
+wl0_wep_gen=
+wl0_gmode_protection=auto
+wl0_maclist=
+sdram_init=0x0419
+dl_ram_addr=a0001000
+wl0_radius_key=
+regulation_domain=0X30DE
+wl0_corerev=5
+wl0_channel=6
+wl0_auth_mode=disabled
+et1phyaddr=0
+boardnum=asusX
diff --git a/hardware/asus/wl-500g/pci.txt b/hardware/asus/wl-500g/pci.txt
new file mode 100644 (file)
index 0000000..8197666
--- /dev/null
@@ -0,0 +1,52 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0500: PCI device 14e4:0803 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff].
+  Bus  0, device   1, function  0:
+    Class 0200: PCI device 14e4:4711 (rev 0).
+      IRQ 5.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0703: PCI device 14e4:4712 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4715 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0604: PCI device 14e4:0804 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+      Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
+  Bus  0, device   6, function  0:
+    Class 0b30: PCI device 14e4:0805 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff].
+  Bus  0, device   7, function  0:
+    Class 0501: PCI device 14e4:0811 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
+      Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
+  Bus  0, device   8, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 4.
+      Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
+  Bus  1, device   0, function  0:
+    Class 0600: PCI device 14e4:4710 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
+      Prefetchable 32 bit memory at 0x0 [0x7ffffff].
+  Bus  1, device   2, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 3).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff].
diff --git a/hardware/asus/wl-500gd/cfe.txt b/hardware/asus/wl-500gd/cfe.txt
new file mode 100644 (file)
index 0000000..72109c6
--- /dev/null
@@ -0,0 +1,31 @@
+CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
+Build Date: Â¤G  3¤ë  1 16:49:41 CST 2005 (root@PaNLinux)
+Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
+
+Initializing Arena.
+Initializing Devices.
+et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1.3.2.0
+rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
+CPU type 0x29007: 200MHz
+Total memory: 0x2000000 bytes (32MB)
+
+Total memory used by CFE:  0x80300000 - 0x80436F10 (1273616)
+Initialized Data:          0x803313D0 - 0x80333760 (9104)
+BSS Area:                  0x80333760 - 0x80334F10 (6064)
+Local Heap:                0x80334F10 - 0x80434F10 (1048576)
+Stack Area:                0x80434F10 - 0x80436F10 (8192)
+Text (code) segment:       0x80300000 - 0x803313D0 (201680)
+Boot area (physical):      0x00437000 - 0x00477000
+Relocation Factor:         I:00000000 - D:00000000
+
+Device eth0:  hwaddr 00-11-D8-01-CB-3E, ipaddr 192.168.1.1, mask 255.255.255.0
+        gateway not set, nameserver not set
+Rescue Flag disable.
+Reading :: TFTP Server.
+Failed.: Timeout occured
+Lader:raw Filesys:raw Dev:flash0.os File: Options:(null)
+Loading: ...... 1662976 bytes read
+Entry at 0x80001000
+Closing network.
+Starting program at 0x80001000
+
diff --git a/hardware/asus/wl-500gd/cpuinfo.txt b/hardware/asus/wl-500gd/cpuinfo.txt
new file mode 100644 (file)
index 0000000..335b012
--- /dev/null
@@ -0,0 +1,12 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.47
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
+
diff --git a/hardware/asus/wl-500gd/dmesg-2_4_29.txt b/hardware/asus/wl-500gd/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..4a242e8
--- /dev/null
@@ -0,0 +1,97 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
+Determined physical RAM map:
+ memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM5365 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Setting latency timer of device 01:00.0 to 64
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+ Amd/Fujitsu Extended Query Table v1.1 at 0x0040
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000000
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:01.0 to 64
+5325E   phy=0
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 01:03.0 to 64
+PCI: Enabling device 01:03.0 (0004 -> 0006)
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+eth1: attempt to add interface with same source address.
+br0: port 2(eth1) entering listening state
+br0: port 1(vlan0) entering listening state
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
+
diff --git a/hardware/asus/wl-500gd/info.txt b/hardware/asus/wl-500gd/info.txt
new file mode 100644 (file)
index 0000000..4903714
--- /dev/null
@@ -0,0 +1,25 @@
+Asus WL-500g Deluxe (aka Wl-500GD, WL-500GX)
+
+Online Description from Asus:
+http://www.asus.com/prog/spec.asp?m=WL-%20500g%20Deluxe&langs=01
+
+CPU: BCM5365 at 200 MHz (integrated switch)
+RAM: 32 MB
+Flash: 4 MB
+1 Broadcom BCM47XX 10/100Mbps Ethernet Controller
+1 Broadcom BCM43XX 802.11 Wireless Controller
+2 USB2.0 external
+2 USB2.0 internal
+2 serial internal
+no JTAG
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
+cfe.txt: output of the bootloader
+
+Notes:
+Earlier models came with only 16MB ram activated. Please check
+http://forum.chupa.nl/showthread.php?t=1704 for more info.
diff --git a/hardware/asus/wl-500gd/nvram.txt b/hardware/asus/wl-500gd/nvram.txt
new file mode 100644 (file)
index 0000000..82db232
--- /dev/null
@@ -0,0 +1,360 @@
+wl_radius_port=1812
+usb_webremote6_x=
+wl_mode_x=0
+filter_lw_dstport_x=
+wan_unit=0
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wan_route=
+wl0_frameburst=0
+qos_enable_x=0
+misc_ping_x=0
+wan_pppoe_keepalive=0
+filter_wl_default_x=ACCEPT
+log_ipaddr=
+boardrev=0x10
+wl_gmode_protection_x=0
+wl_wdsapply_x=0
+usb_webremote2_x=
+et0macaddr=00:11:D8:01:CB:3E
+wan_pppoe_passwd=
+watchdog=5000
+boot_wait=on
+wl_phytypes=
+rescueflag=disable
+wl0_infra=1
+wan_mode_x=2
+wl0_country_code=AU
+fw_disable=0
+et0mdcport=0
+usb_webmserver_x=
+dhcp_dns1_x=
+filter_lw_dstip_x=
+wan_nat_x=1
+wl_infra=1
+reset_gpio=7
+wl_maclist_x=
+filter_wl_time_x=00002359
+pmon_ver=CFE 1.3.2.0
+restore_defaults=0
+wl_radio_x=1
+vts_proto_x=
+vts_ipaddr_x=
+filter_lw_time_x=00002359
+wan_pppoe_service=
+wan_lease=86400
+ddns_status_t=
+wl_radius_ipaddr=
+http_wanport=
+usb_websecurity_time_x=00002359
+lan_gateway=
+wl0_ifname=eth1
+wan_pppoe_txonly_x=0
+lan_domain=
+timer_interval=3600
+wl_wdsnum_x=0
+usb_ftpusername_x=
+usb_webactivex_x=7777
+forward_port0=
+dr_staticnum_x=0
+lan_ipaddr_t=
+wan_pppoe_mru=1492
+vts_desc_x=
+wl0_mode=ap
+wan_gateway=
+usb_webrectime_x=0
+dhcp_staticmac_x=
+time_interval=20
+dhcp_start=192.168.1.2
+usb_websecurity_x=0
+url_keyword_x=
+wan_etherspeed_x=auto
+wl0_ap_isolate=0
+dr_staticgateway_x=
+vts_port_x=
+usb_webfresh_x=1
+dhcp_end=192.168.1.254
+filter_wl_date_x=1111111
+os_flash_addr=bfc40000
+wl0_gmode=1
+dhcp_lease=86400
+usb_ftpnum_x=0
+filter_wl_icmp_x=
+boardtype=bcm95365r
+filter_lw_proto_x=
+is_default=1
+usb_ftprights_x=
+usb_ftpport_x=21
+url_num_x=0
+filter_lw_date_x=1111111
+wl_gmode=1
+wan_gateway_t=
+stats_server=
+ntp_server0=time.nist.gov
+usb_websecurity_date_x=1111111
+ntp_server1=
+filter_lw_icmp_x=
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=default
+filter_wl_dstport_x=
+http_username=admin
+usb_ftpbanip_x=
+usb_ftpenable_x=1
+fw_wl_enable_x=0
+os_date=Oct 11 2004
+usb_webremote5_x=
+http_lanport=80
+wl_plcphdr=long
+wl_macmode=disabled
+wan_domain=
+wan_hwname=
+wl0_key1=
+wl_phytype=b
+wan_netmask=
+lan_lease=86400
+wl0_key2=
+wl_lazywds=0
+wl0_key3=
+macfilter_num_x=0
+wl0_key4=
+filter_client0=
+ddns_username_x=
+wan_hwaddr_x=
+filter_maclist=
+wl_auth_mode=open
+usb_webremote1_x=
+usb_webhttpcheck_x=0
+usb_websense_x=1
+autofw_outport_x=
+misc_lpr_x=0
+usb_ftpstaytimeout_x=240
+filter_lw_num_x=0
+filter_wl_num_x=0
+sp_battle_ips=1
+wl_wpa_psk=
+http_passwd=admin
+qos_ipaddr_x=
+wan_pppoe_demand=0
+lan_stp=1
+fw_lw_enable_x=0
+wl_mode=ap
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl_wpa_gtk_rekey=0
+wl0_radioids=BCM2050
+wl0_phytype=g
+wl0_lazywds=0
+dr_default_x=1
+filter_wl_dstip_x=
+autofw_inport_x=
+wan_route_x=IP_Routed
+wl0_afterburner=off
+dr_staticnetmask_x=0
+wl0_antdiv=-1
+lan_hwaddr=
+wan_dns=
+filter_lw_srcip_x=
+wl_mode_ex=ap
+wan_dns2_x=
+wl_dtim=1
+wl_ssid=default
+wl0_wpa_psk=
+dhcp_staticnum_x=0
+wan_pppoe_mtu=1492
+usb_webcaption_x=Web Camera Live Demo!!!
+wan_netmask_t=
+dhcp_wins=wan
+wl_macapply_x=Both
+os_server=
+dr_static_matric_x=1
+wl_key1=
+wan_proto=dhcp
+sr_num_x=0
+wl_key2=
+wl0_unit=0
+wan_ipaddr_t=
+wl_key3=
+wl_country_code=AU
+wl_key4=
+wl_hwaddr=
+ddns_enable_x=0
+sr_if_x=
+usb_websendto_x=
+wan_pppoe_idletime=1800
+wl0_wds=
+filter_wl_proto_x=
+usb_ftpmax_x=12
+sr_rip_x=0
+wl_rate=0
+log_level=0
+ntp_server=192.5.41.40 192.5.41.41 133.100.9.2
+wan_hwaddr=
+usb_webremote4_x=
+sr_enable_x=0
+misc_http_x=0
+wl_phrase_x=
+lan_ifnames=eth0 eth1
+wl0_radius_port=1812
+wl0_auth=0
+wl0_radius_ipaddr=
+ddns_wildcard_x=0
+lan_hostname=
+wl_country=
+vlan_enable=1
+qos_priority_x=
+wl_wep_x=0
+filter_lw_srcport_x=
+usb_webhttpport_x=7776
+wan_pppoe_username=
+wan_ifnames=eth0
+wl_crypto=0
+wl_rateset=default
+usb_webremote_x=LAN Only
+lan_gateway_t=
+qos_maxbw_x=
+autofw_num_x=0
+wl_radius_key=
+lan_proto=dhcp
+os_name=linux
+lan_ipaddr=192.168.1.1
+clkfreq=200
+url_enable_x=0
+wan_dns_t=
+wl_unit=0
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+router_disable=0
+sdram_config=0x32
+wl0_country=
+wl_wdslist_x=
+dhcp_gateway_x=
+usb_ftpsuper_x=0
+dmz_ipaddr=
+wl_wds=
+scratch=a0180000
+wl0_rateset=default
+usb_ftppasswd_x=
+wan_dns1_x=
+usb_ftpanonymous_x=1
+wan_primary=0
+lan_ifname=br0
+usb_webmode_x=1
+filter_wl_srcip_x=
+sdram_refresh=0x00
+qos_dir_x=
+dhcp_domain=wan
+usb_webenable_x=1
+wl_auth=0
+sdram_ncdl=0x3e
+usb_ftpmaxuser_x=
+usb_webdriver_x=0
+hardware_version=WL500gd-01-04-01-50
+usb_ftptimeout_x=120
+wl_frameburst=0
+ezc_enable=1
+qos_minbw_x=
+wl_macnum_x=0
+is_modified=0
+wan_ipaddr=
+usb_websubject_x=Motion detection alert!!!
+dmz_ip=
+sr_gateway_x=
+misc_natlog_x=0
+wl0_rts=2347
+wan_pppoe_relay_x=0
+wl_ifname=
+wan_wins=
+wl_wep=disabled
+os_version=1.3.2.0
+wl_gmode_protection=auto
+wl0_wpa_gtk_rekey=0
+wl_radio_time_x=00002359
+dhcp_staticip_x=
+lan_netmask_t=
+wl_frag=2346
+wl0_key=1
+dhcp_static_x=0
+macfilter_list_x=
+usb_webremote3_x=
+wl_maclist=
+filter_macmode=deny
+filter_lw_default_x=ACCEPT
+filter_wl_srcport_x=
+console_loglevel=1
+et0phyaddr=254
+time_zone=GMT0
+autofw_inproto_x=
+vts_enable_x=1
+fw_enable_x=1
+usb_webattach_x=1
+wan_ifname=eth0
+wl_radioids=
+wan_status_t=
+vts_num_x=0
+wan_hostname=
+wl0_radio=1
+wl_corerev=
+sr_ipaddr_x=
+dr_static_rip_x=0
+qos_port_x=
+wl_channel=0
+wl0_bcn=100
+sr_matric_x=
+wl0_hwaddr=00:11:D8:01:CB:3E
+wl_afterburner=off
+wl_radio=1
+usb_ftpscript_x=
+ezc_version=1
+wl0_gmode_protection=auto
+usb_webimage_x=1
+wl_radio_date_x=1111111
+wl0_maclist=
+autofw_outproto_x=
+ddns_passwd_x=
+wl_rts=2347
+sdram_init=0x2008
+macfilter_enable_x=disabled
+wl_ap_isolate=0
+wan_desc=
+lan_wins=
+lan_hwnames=
+dl_ram_addr=a0001000
+url_time_x=00002359
+wan_dnsenable_x=1
+wl0_radius_key=
+regulation_domain=0x30DE
+wl_radio_power_x=19
+autofw_enable_x=0
+wl0_corerev=5
+wl_key=1
+wl0_channel=0
+ddns_hostname_x=
+lan_proto_x=1
+sr_netmask_x=
+upnp_enable=1
+fw_log_x=none
+wan_pppoe_ac=
+dhcp_enable_x=1
+misc_httpport_x=8080
+wan_proto_t=
+wl0_auth_mode=open
+wl_closed=0
+wan_heartbeat_x=
+autofw_port0=
+wl0_crypto=0
+dhcp_wins_x=
+autofw_desc_x=
+boardnum=45
+wan_pppoe_ifname=
+dr_staticipaddr_x=
+vts_protono_x=
+wl_bcn=100
+qos_rulenum_x=0
+url_date_x=1111111
+ddns_server_x=
+usb_bannum_x=0
+wl_antdiv=-1
diff --git a/hardware/asus/wl-500gd/pci.txt b/hardware/asus/wl-500gd/pci.txt
new file mode 100644 (file)
index 0000000..2cca7f8
--- /dev/null
@@ -0,0 +1,64 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 1000: PCI device 14e4:4718 (rev 1).
+      IRQ 5.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4715 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0604: PCI device 14e4:0804 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+      Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
+  Bus  1, device   0, function  0:
+    Class 0600: PCI device 14e4:5365 (rev 0).
+      IRQ 2.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
+      Prefetchable 32 bit memory at 0x0 [0x7ffffff].
+  Bus  1, device   2, function  0:
+    Class 0c03: PCI device 1106:3038 (rev 97).
+      IRQ 2.
+      Master Capable.  Latency=22.
+      I/O at 0x100 [0x11f].
+  Bus  1, device   2, function  1:
+    Class 0c03: PCI device 1106:3038 (rev 97).
+      IRQ 2.
+      Master Capable.  Latency=22.
+      I/O at 0x120 [0x13f].
+  Bus  1, device   2, function  2:
+    Class 0c03: PCI device 1106:3104 (rev 99).
+      IRQ 2.
+      Master Capable.  Latency=22.
+      Non-prefetchable 32 bit memory at 0x40002000 [0x400020ff].
+  Bus  1, device   3, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 3).
+      IRQ 2.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x40004000 [0x40005fff].
+
diff --git a/hardware/buffalo/wbr2-g54/cpuinfo.txt b/hardware/buffalo/wbr2-g54/cpuinfo.txt
new file mode 100644 (file)
index 0000000..335b012
--- /dev/null
@@ -0,0 +1,12 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.47
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
+
diff --git a/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt b/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..4fc7384
--- /dev/null
@@ -0,0 +1,89 @@
+PU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Sun Mar 27 17:16:55 CEST 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 14028k/16384k available (1493k kernel code, 2356k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+ Amd/Fujitsu Extended Query Table v1.3 at 0x0040
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+cramfs: wrong magic
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/hardware/buffalo/wbr2-g54/info.txt b/hardware/buffalo/wbr2-g54/info.txt
new file mode 100644 (file)
index 0000000..60f1523
--- /dev/null
@@ -0,0 +1,19 @@
+Buffalo WBR2-G54
+
+Online Description from Buffalo:
+http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wbr2-g54
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
+
diff --git a/hardware/buffalo/wbr2-g54/nvram.txt b/hardware/buffalo/wbr2-g54/nvram.txt
new file mode 100644 (file)
index 0000000..df73509
--- /dev/null
@@ -0,0 +1,100 @@
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=off
+boardrev=0x10
+il0macaddr=00:0D:0B:1A:93:8D
+et0macaddr=00:0D:0B:1A:93:8C
+boot_wait=on
+watchdog=1000
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+pmon_ver=CFE 3.51.21.10
+wl0_ifname=eth1
+gpio2=adm_eecs
+gpio3=adm_eesk
+gpio4=adm_eedi
+gpio5=adm_rc
+vlan0ports=1 2 3 4 5*
+wl0_mode=ap
+wl0_ap_isolate=0
+os_flash_addr=bfc40000
+wl0_gmode=6
+sromrev=2
+boardtype=0x0101
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=000D0B1A938D
+wl0_key1=
+wl0id=0x4320
+wl0_key2=
+wl0_key3=
+wl0_key4=
+pmon_date=Feb 20 2004 16:36:31
+ag0=255
+buffalo_id=29bb0332
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl0gpio0=2
+wl0_radioids=BCM2050
+wl0gpio1=0
+wl0_phytype=g
+wl0gpio2=0
+wl0_lazywds=1
+wl0gpio3=0
+wl0gpio4=0
+wl0gpio5=0
+boardflags2=0
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_wpa_psk=
+wl0_unit=0
+wl_country_code=AU
+memc_config=0x00048540
+pa0itssit=62
+wl0_wds=
+cctl=0
+wl0_radius_port=1812
+wl0_auth=0
+wl0_radius_ipaddr=
+pa0maxpwr=60
+clkfreq=200
+lan_ipaddr=192.168.11.1
+vlan1hwname=et0
+aa0=3
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+sdram_config=0x0032
+wl0_country=
+vlan1ports=0 5
+scratch=a0180000
+ccode=0
+wl0_rateset=default
+boardflags=0x0188
+sdram_refresh=0x0000
+sdram_ncdl=0x23
+wl0_rts=2347
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:0D:0B:1A:93:8D
+wl0_gmode_protection=auto
+pa0b0=0x1136
+wl0_maclist=
+pa0b1=0xfb93
+pa0b2=0xfea5
+sdram_init=0x0000
+vlan0hwname=et0
+dl_ram_addr=a0001000
+wl0_radius_key=
+wl0_corerev=7
+wl0_channel=11
+wl0_auth_mode=open
+wl0_crypto=tkip
+boardnum=00
+
diff --git a/hardware/buffalo/wbr2-g54/pci.txt b/hardware/buffalo/wbr2-g54/pci.txt
new file mode 100644 (file)
index 0000000..5bf36ab
--- /dev/null
@@ -0,0 +1,38 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
+
diff --git a/hardware/buffalo/wla2-g54l/cpuinfo.txt b/hardware/buffalo/wla2-g54l/cpuinfo.txt
new file mode 100644 (file)
index 0000000..1e91441
--- /dev/null
@@ -0,0 +1,11 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.47
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
diff --git a/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt b/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..a0c93c2
--- /dev/null
@@ -0,0 +1,85 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 14096k/16384k available (1463k kernel code, 2288k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+ Amd/Fujitsu Extended Query Table v1.0 at 0x0040
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+br0: port 1(vlan0) entering learning state
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
diff --git a/hardware/buffalo/wla2-g54l/info.txt b/hardware/buffalo/wla2-g54l/info.txt
new file mode 100644 (file)
index 0000000..b979cdd
--- /dev/null
@@ -0,0 +1,18 @@
+Buffalo WLA2-G54L
+
+Online Description from Buffalo:
+http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wla2-g54l
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller
+serial port possible
+no JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/hardware/buffalo/wla2-g54l/nvram.txt b/hardware/buffalo/wla2-g54l/nvram.txt
new file mode 100644 (file)
index 0000000..8545f1a
--- /dev/null
@@ -0,0 +1,455 @@
+ni_netmask=255.255.255.0
+wl_radius_port=1812
+pppoe_demand_select_1=1
+pppoe_demand_select_2=1
+pppoe_demand_select_3=1
+os_ram_addr=80001000
+dhcp_except=
+pppoe_demand_select_4=1
+wl0_net_mode=mixed
+log_send_forward=0
+wl0_frameburst=on
+log_send_enable=0
+il0macaddr=00:0D:0B:41:8A:C3
+boardrev=0x10
+filter_udp=
+ntp_interval=24
+forward_ipmasq_time=5
+hostname=
+et0macaddr=00:0D:0B:41:8A:C2
+pppoe_demand_1=0
+wl_gmode_protection_cts=1
+pppoe_demand_2=0
+wl_pwrout_per=100
+wep_ascii_select1=1
+log_dhcp_cli=1
+pppoe_demand_3=0
+d11b_rateset=default
+d11a_channel=64
+d11g_mode=5
+wep_ascii_select2=1
+pppoe_demand_4=0
+wl0_wep_buf=
+watchdog=1000
+boot_wait=on
+wep_ascii_select3=1
+wep_ascii_select4=1
+wl0_macmode1=disabled
+ini_ipaddr=192.168.11.100
+wl0_infra=1
+et0mdcport=0
+wl0_country_code=AU
+d11b_bcn=100
+pppoe_keepalive=1
+log_send_config=1
+pppoe_label_1=
+pppoe_label_2=
+pmon_ver=CFE 3.51.21.10
+pppoe_label_3=
+d11g_protection=0
+restore_defaults=0
+attack_spoofing=0
+pppoe_label_4=
+wan_lease=864000
+d11b_frag=2346
+d11g_dtim=1
+filter_melco=
+http_wanport=
+wl_radius_ipaddr=
+pppoe_label=
+pppoe_demand_select=1
+wan_hwaddr_select_def=1
+pppoe_mtu_1=1454
+wl0_ifname=eth1
+pppoe_mtu_2=1454
+timer_interval=3600
+pppoe_mtu_3=1454
+gpio2=adm_eecs
+filter_lansetup=0
+pppoe_mtu_4=1454
+gpio3=adm_eesk
+gpio4=adm_eedi
+dhcp_manual=
+ap_name=AP000D0B418AC2
+pppoe_mtu=1454
+vlan0ports=1 2 3 4 5*
+gpio5=adm_rc
+log_disp_name=NEWEST
+route_pppoe=
+filter_tcp=
+pppoe_keepalive_1=1
+pppoe_keepalive_2=1
+log_attack=0
+pppoe_keepalive_3=1
+wl0_mode=ap
+dhcp_start=192.168.11.2
+pppoe_keepalive_4=1
+wl0_ap_isolate=0
+httpc_auth_ipaddr_tmp=
+dhcp_end=192.168.11.17
+log_send_dhcp_serv=0
+os_flash_addr=bfc40000
+domain=
+log_send_dhcp_cli=1
+sromrev=2
+ap_wl_version=
+wl0_gmode=5
+httpc_login_off_time=5
+pppoe_username_1=
+boardtype=0x0101
+pppoe_username_2=
+attack_cm_addr=
+pppoe_username_3=
+wl_gmode=5
+pppoe_username_4=
+stats_server=
+log_pppoe=0
+static_route=
+d11g_rate=0
+log_ntpcli=1
+lan_netmask=255.255.255.0
+log_send_pppoe=0
+attack_select=0
+wl0_wep_last=
+http_username=root
+wl0_ssid=000D0B418AC2
+wl0_dtim=1
+pmon_upgrade=0
+http_lanport=80
+wl_plcphdr=long
+wl_macmode=disabled
+lcp_echo_failure_1=6
+wan_hwname=
+log_disp_page=0
+lcp_echo_failure_2=6
+wl0id=0x4320
+wan_netmask=255.255.255.0
+d11a_dtim=1
+lcp_echo_failure_3=6
+wl_phytype=g
+wl0_key1=
+wl_lazywds=0
+lcp_echo_failure_4=6
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl_auth_mode=disabled
+log_etc=1
+pppoe_mru_1=1454
+pppoe_mru_2=1454
+dhcp_domain_select=NONE
+attack_mail_pop_addr=
+pppoe_mru_3=1454
+d11g_rts=2347
+pppoe_mru_4=1454
+pmon_date=Mar 12 2004 14:29:18
+ag0=255
+http_passwd=
+wl_wpa_psk=
+d11b_channel=11
+melco_web_carrier_select=
+wl_wds_list=
+log_level_notice=1
+log_power=1
+lan_stp=0
+forward_melco=
+dhcp_dns_ip1=
+log_wired=1
+wan_ipaddr_bak=
+buffalo_id=29129
+wl_mode=ap
+dhcp_dns_ip2=
+log_send_power=1
+log_send_wired=1
+melco_web_lan=0
+wl0_closed=0
+wl0_rate=0
+wl0_plcphdr=long
+wl0gpio0=2
+wl_wpa_gtk_rekey=0
+d11g_rateset=default
+wl0_macmode=disabled
+wl0gpio1=0
+wl0_radioids=BCM2050
+wl0gpio2=0
+wl0_phytype=g
+wl0gpio3=0
+wl0_lazywds=0
+wl0gpio4=0
+dhcp_gw_select=AP
+wl0gpio5=0
+pppoe_disable_1=0
+boardflags2=0
+pppoe_disable_2=0
+log_level_err=1
+pppoe_disable_3=0
+wl0_afterburner=auto
+d11a_rate=0
+log_filter=1
+pppoe_disable_4=0
+lan_hwaddr=
+wl0_antdiv=-1
+asts_data=
+wl_ssid=000D0B418AC2
+wl_dtim=1
+wl0_wpa_psk=
+d11g_bcn=100
+time_zone_melco=GMT+6
+log_send_level_notice=1
+pppoe_hostuniq_1=
+httpc_auth_ipaddr=
+pppoe_hostuniq_2=
+wl0_mac_list=
+dhcp_wins=
+pppoe_hostuniq_3=
+os_server=
+ap_fw_code=00
+pppoe_hostuniq_4=
+wan_proto=dhcp
+wl_key1=
+wl_key2=
+wl_key3=
+wl0_unit=0
+wl_key4=
+wl_country_code=AU
+memc_config=0x0004854a
+wl_hwaddr=00:0D:0B:41:8A:C3
+pppoe_session_default=-1
+pppoe_manual=0
+dhcp_wins_select=NONE
+pa0itssit=62
+flash_recover=1
+wl_txpwr=22
+wl_mac_melco=
+ntp_enable=0
+time_backup=2003.01.01-00:00:00
+melco_web_wan=0
+attack_threshold=5
+pppoe_passwd_confirm=
+dhcp_range=16
+log_send_etc=1
+d11g_frag=2346
+wl0_wds=
+wl_rate=0
+pppoe_incom_1=0
+cctl=0
+log_level=1
+d11a_rts=2347
+filter_ident=0
+pppoe_incom_2=0
+ntp_server=
+pppoe_incom_3=0
+wan_hwaddr=
+pppoe_incom_4=0
+lan_ifnames=eth0 eth2
+wl_limit_select=0
+pppoe_ifname=
+filter_wdssetup=0
+pppoe_auth_1=AUTO
+wl0_auth=0
+wl0_mac_deny=
+wl0_radius_port=1812
+pppoe_auth_2=AUTO
+pppoe_auth_3=AUTO
+wl0_radius_ipaddr=
+pppoe_service=
+pppoe_auth_4=AUTO
+wl_country=Worldwide
+pa0maxpwr=60
+attack_synfd_iplimit=5
+lcp_echo_interval=60
+wl_rateset=default
+log_send_attack=0
+pppoe_retransmit_1=4
+http_passwd_confirm=
+pppoe_retransmit_2=4
+pppoe_retransmit_3=4
+dhcp_start_melco=192.168.11.2
+pppoe_retransmit_4=4
+lan_ipaddr=192.168.11.100
+clkfreq=200
+os_name=linux
+lan_proto=static
+wl_radius_key=
+aa0=3
+vlan1hwname=et0
+dns_manual0=
+wl_unit=0
+filter_wanping=1
+dns_manual1=
+wan_connecttime=
+wl0_phytypes=g
+d11a_bcn=100
+d11g_channel=11
+wl0_wep=off
+wl0_frag=2346
+wins=
+pppoe_incom=0
+pppoe_passwd=
+pppoe_registered_1=0
+sdram_config=0x0032
+filter_nbt=0
+log_send_ntpcli=1
+melco_web_select=
+pppoe_registered_2=0
+pppoe_registered_3=0
+wl0_country=Worldwide
+vlan1ports=0 5
+dmz_ipaddr=
+pppoe_registered_4=0
+wl_wds=
+scratch=a0180000
+dns=
+d11a_frag=2346
+ccode=0
+filter_ip=
+melco_web_setuzoku=0
+wl0_rateset=default
+attack_mail_to=
+pppoe_idletime_1=20
+log_firewall=1
+pppoe_idletime_2=20
+lcp_echo_failure=6
+wl0_wep_bit=64
+pppoe_idletime=20
+pppoe_idletime_3=20
+log_server=
+asts_enable=1
+pppoe_idletime_4=20
+lan_ifname=br0
+attack_mail_pop_pass=
+boardflags=0x0188
+rip_wan_recv=0
+sdram_refresh=0x0000
+log_config=1
+wl0_afterburner_override=-1
+dhcp_domain=
+wl_auth=0
+sdram_ncdl=0x20422
+filter_mac=
+wl_frameburst=on
+attack_cm_select=0
+filter_wlansetup=0
+log_forward=0
+wan_ipaddr=1.1.1.1
+forward_enable=1
+asts_sta_data=
+wl0_passphrase=
+gateway_manual=
+lcp_echo_interval_1=60
+attack_mail_select=0
+attack_synfd_limit=0
+lcp_echo_interval_2=60
+wl0_rts=2347
+wl_ssid_mac=1
+pppoe_passwd_1=
+lcp_echo_interval_3=60
+pppoe_passwd_2=
+lcp_echo_interval_4=60
+wl_ifname=eth2
+wl_wep=off
+pppoe_passwd_3=
+d11b_dtim=1
+d11b_plcphdr=long
+dhcp_gw_ip=
+pppoe_passwd_4=
+os_version=3.60.9.0
+wan_speed=AUTO
+pppoe_username=
+wl_gmode_protection=auto
+gateway=0.0.0.0
+asts_deny_mac=
+wl0_wpa_gtk_rekey=0
+log_dhcp_serv=0
+wl_frag=2346
+httpc_ipaddr=
+wl0_key=1
+log_send_filter=1
+wl0_active_mac=
+wl_maclist=
+et0phyaddr=30
+console_loglevel=1
+time_zone=PST8PDT
+d11a_rateset=default
+d11g_shortslot_restrict=0
+wl_ssid_input=
+wan_mdi=0
+pppoe_ac_name=
+pppoe_passwd_confirm_1=
+log_send_level_err=1
+log_send_firewall=1
+pppoe_passwd_confirm_2=
+wan_ifname=
+attack_mail_from=
+pppoe_disable=0
+pppoe_passwd_confirm_3=
+d11a_hwaddr=
+rip_lan_recv=3
+ap_version=BUFFALO Ver.1.00
+pppoe_passwd_confirm_4=
+wl_mac=
+pppoe_service_1=
+wl0_radio=1
+pppoe_service_2=
+wl_channel=11
+d11g_hwaddr=
+pppoe_service_3=
+pppoe_service_4=
+wl0_bcn=100
+dhcp_dns_select=AP
+wl_wds_enable=0
+forward_udp=
+wl_radio=1
+wl0_hwaddr=00:0D:0B:41:8A:C3
+d11b_rate=0
+forward_group=
+rip_wan_send=0
+ap_hw_code=00
+wl0_wep_gen=
+pa0b0=0x1136
+dhcp_lease_time=48
+log_wlcli=1
+wl0_gmode_protection=auto
+pa0b1=0xfb93
+attack_dos_rules=0
+wl0_maclist=
+pa0b2=0xfea5
+sdram_init=0x000a
+wl_rts=2347
+log_send_wlcli=1
+pppoe_hostuniq=
+ping_ipaddr=192.168.11.1
+vlan0hwname=et0
+dl_ram_addr=a0001000
+lan_hwnames=et0 wl0
+attack_mail_pop_user=
+pppoe_registered=0
+pppoe_retransmit=4
+pppoe_demand=0
+pmon_upgrade_mode=0
+pppoe_ac_name_1=
+wl0_radius_key=
+pppoe_ac_name_2=
+pppoe_ac_name_3=
+wl0_corerev=7
+wl_key=1
+lan_speed=AUTO
+pppoe_ac_name_4=
+pppoe_mru=1454
+wl0_channel=11
+phytst=0
+pppoe_auth=AUTO
+upnp_enable=1
+wl_ps=0
+product_name=Product_name
+wl_closed=0
+wl0_auth_mode=disabled
+wl0_crypto=tkip
+boardnum=00
+attack_mail_smtp_addr=
+boardtype_2=0
+wl_bcn=100
+d11b_rts=2347
+forward_tcp=
+d11b_hwaddr=
+rip_lan_send=0
diff --git a/hardware/buffalo/wla2-g54l/pci.txt b/hardware/buffalo/wla2-g54l/pci.txt
new file mode 100644 (file)
index 0000000..2be1726
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/linksys/wrt54g_v11/cpuinfo.txt b/hardware/linksys/wrt54g_v11/cpuinfo.txt
new file mode 100644 (file)
index 0000000..b3cfcfb
--- /dev/null
@@ -0,0 +1,16 @@
+system type            : Broadcom BCM947XX
+processor              : 0
+cpu model              : BCM4710 V0.0
+BogoMIPS               : 82.94
+wait instruction       : no
+microsecond timers     : yes
+tlb_entries            : 32
+extra interrupt vector : no
+hardware watchpoint    : no
+VCED exceptions                : not available
+VCEI exceptions                : not available
+dcache hits            : 2866936757
+dcache misses          : 57830034
+icache hits            : 1724839356
+icache misses          : 431170605
+instructions           : 2156850242
diff --git a/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt b/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..58e5ce5
--- /dev/null
@@ -0,0 +1,96 @@
+CPU revision is: 00024000
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4710 rev 0 at 125 MHz
+Using 62.400 MHz high precision timer.
+!unable to setup serial console!
+Calibrating delay loop... 82.94 BogoMIPS
+Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Setting latency timer of device 01:00.0 to 64
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+ Amd/Fujitsu Extended Query Table v1.1 at 0x0040
+Physically mapped flash: Swapping erase regions for broken CFI table.
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1fc00000
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000edd94-0x001fd000 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x00200000-0x003f0000 : "OpenWrt"
+sflash: chipcommon not found
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Warning: unable to open an initial console.
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 0000041a
+using v1 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E  phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:08.0 to 64
+5325E  phy=FFFFFFFF
+eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 01:08.0 to 64
+PCI: Enabling device 01:08.0 (0004 -> 0006)
+eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan2: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+device eth2 entered promiscuous mode
+br0: port 3(eth2) entering learning state
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan2) entering learning state
+br0: port 3(eth2) entering forwarding state
+br0: topology change detected, propagating
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan2) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/hardware/linksys/wrt54g_v11/ifconfig.txt b/hardware/linksys/wrt54g_v11/ifconfig.txt
new file mode 100644 (file)
index 0000000..a47a11b
--- /dev/null
@@ -0,0 +1,54 @@
+br0       Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:6022 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:356276 (347.9 KiB)  TX bytes:457411 (446.6 KiB)
+
+eth0      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:6204 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:514297 (502.2 KiB)  TX bytes:484047 (472.7 KiB)
+          Interrupt:3 Base address:0x2000 
+
+eth1      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:56  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:0 (0.0 B)  TX bytes:7209 (7.0 KiB)
+          Interrupt:4 Base address:0x8000 
+
+eth2      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:57  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:2202
+          TX packets:93 errors:36 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:0 (0.0 B)  TX bytes:11951 (11.6 KiB)
+          Interrupt:6 Base address:0x2000 
+
+lo        Link encap:Local Loopback  
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan1     Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:181 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:19634 (19.1 KiB)  TX bytes:3564 (3.4 KiB)
+
+vlan2     Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:6023 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:382991 (374.0 KiB)  TX bytes:480483 (469.2 KiB)
+
diff --git a/hardware/linksys/wrt54g_v11/info.txt b/hardware/linksys/wrt54g_v11/info.txt
new file mode 100644 (file)
index 0000000..2bd458d
--- /dev/null
@@ -0,0 +1,23 @@
+Linksys WRT54G v1.1
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
+
+CPU: BCM4710 at 125 MHz
+RAM: 16 MB
+Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit)
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith
+serial port possible (but not used)
+JTAG interface available (but not used)
+
+List of files:
+nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
+lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported)
+
+--
+Nico
diff --git a/hardware/linksys/wrt54g_v11/lspci-vv.txt b/hardware/linksys/wrt54g_v11/lspci-vv.txt
new file mode 100644 (file)
index 0000000..d58a02b
--- /dev/null
@@ -0,0 +1,92 @@
+0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin ? routed to IRQ 6
+       Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
+       Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
+       Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin B routed to IRQ 5
+       Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
+       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Latency: 64
+       Interrupt: pin A routed to IRQ 3
+       Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic])
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin C routed to IRQ 2
+       Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI])
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin D routed to IRQ 2
+       Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode])
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+
+       Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
+       Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
+       I/O behind bridge: 00000000-00000fff
+       Memory behind bridge: 00000000-000fffff
+       Prefetchable memory behind bridge: 00000000-000fffff
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+
+0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin ? routed to IRQ 6
+       Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Interrupt: pin E routed to IRQ 2
+       Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
+       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Latency: 64
+       Interrupt: pin F routed to IRQ 4
+       Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
+       Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
+       Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge
+       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
+       Latency: 64
+       Interrupt: pin A routed to IRQ 6
+       Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
+       Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
+
+0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
+       Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603
+       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+       Latency: 64
+       Interrupt: pin A routed to IRQ 6
+       Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K]
+
diff --git a/hardware/linksys/wrt54g_v11/nvram.txt b/hardware/linksys/wrt54g_v11/nvram.txt
new file mode 100644 (file)
index 0000000..6ff7fba
--- /dev/null
@@ -0,0 +1,88 @@
+Intel_firmware_version=v1.41.8
+boardnum=42
+boardtype=bcm94710dev
+boot_date=Fri Sep 26 00:34:47 2003
+boot_ver=v1.5
+boot_wait=on
+clkfreq=125
+dl_ram_addr=a0001000
+et0macaddr=00:0C:41:B3:3C:55
+et0mdcport=0
+et0phyaddr=30
+et1macaddr=00:0C:41:B3:3C:56
+et1mdcport=1
+et1phyaddr=30
+firmware_version=v1.42.2
+flash_type=AMD 29lv320DT 2Mx16 TopB
+lan_ipaddr=192.168.1.1
+lan_netmask=255.255.255.0
+os_flash_addr=bfc40000
+os_ram_addr=80001000
+pmon_ver=PMON 3.31.15.0
+scratch=a0180000
+sdram_config=0x0000
+sdram_init=0x0419
+sdram_ncdl=0x00000000
+sdram_refresh=0x8040
+watchdog=5000
+wl0_active_mac=
+wl0_afterburner=auto
+wl0_afterburner_override=-1
+wl0_antdiv=-1
+wl0_ap_ip=
+wl0_ap_isolate=0
+wl0_ap_ssid=
+wl0_auth=0
+wl0_auth_mode=disabled
+wl0_bcn=100
+wl0_channel=6
+wl0_closed=0
+wl0_corerev=5
+wl0_country=Worldwide
+wl0_country_code=AU
+wl0_crypto=tkip
+wl0_dtim=1
+wl0_frag=2346
+wl0_frameburst=on
+wl0_gmode=1
+wl0_gmode_protection=auto
+wl0_hwaddr=00:0C:41:B3:3C:57
+wl0_ifname=eth2
+wl0_infra=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_key=1
+wl0_lazywds=1
+wl0_mac_deny=
+wl0_mac_list=
+wl0_maclist=
+wl0_macmode1=disabled
+wl0_macmode=disabled
+wl0_mode=ap
+wl0_mrate=0
+wl0_net_mode=mixed
+wl0_passphrase=
+wl0_phytype=g
+wl0_phytypes=g
+wl0_plcphdr=long
+wl0_radio=1
+wl0_radioids=BCM2050
+wl0_radius_ipaddr=
+wl0_radius_key=
+wl0_radius_port=1812
+wl0_rate=0
+wl0_rateset=default
+wl0_rts=2347
+wl0_ssid=linksys
+wl0_unit=0
+wl0_wds=
+wl0_wep=off
+wl0_wep_bit=64
+wl0_wep_buf=
+wl0_wep_gen=
+wl0_wep_last=
+wl0_wpa_gtk_rekey=3600
+wl0_wpa_psk=
+wl_country_code=AU
diff --git a/hardware/linksys/wrt54g_v11/pci.txt b/hardware/linksys/wrt54g_v11/pci.txt
new file mode 100644 (file)
index 0000000..ac34fc8
--- /dev/null
@@ -0,0 +1,56 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0500: PCI device 14e4:0803 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff].
+  Bus  0, device   1, function  0:
+    Class 0200: PCI device 14e4:4711 (rev 0).
+      IRQ 5.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 3.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0703: PCI device 14e4:4712 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4715 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0604: PCI device 14e4:0804 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+      Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
+  Bus  0, device   6, function  0:
+    Class 0b30: PCI device 14e4:0805 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff].
+  Bus  0, device   7, function  0:
+    Class 0501: PCI device 14e4:0811 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
+      Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
+  Bus  0, device   8, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 4.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
+  Bus  1, device   0, function  0:
+    Class 0600: PCI device 14e4:4710 (rev 1).
+      IRQ 6.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
+      Prefetchable 32 bit memory at 0x0 [0x7ffffff].
+  Bus  1, device   8, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 3).
+      IRQ 6.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff].
diff --git a/hardware/linksys/wrt54g_v20/cpuinfo.txt b/hardware/linksys/wrt54g_v20/cpuinfo.txt
new file mode 100644 (file)
index 0000000..122914e
--- /dev/null
@@ -0,0 +1,11 @@
+system type            : Broadcom BCM947XX
+processor              : 0
+cpu model              : BCM3302 V0.7
+BogoMIPS               : 199.47
+wait instruction       : no
+microsecond timers     : yes
+tlb_entries            : 32
+extra interrupt vector : no
+hardware watchpoint    : no
+VCED exceptions                : not available
+VCEI exceptions                : not available
diff --git a/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt b/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..83b6012
--- /dev/null
@@ -0,0 +1,97 @@
+PU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
+Determined physical RAM map:
+ memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x2000,blocks=8
+1: offset=0x10000,size=0x10000,blocks=63
+Using word write method
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: Setting MAC address to  00 0a 48 06 82 50.
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
+device br0 entered promiscuous mode
+device br0 left promiscuous mode
+device br0 entered promiscuous mode
+device br0 left promiscuous mode
+
diff --git a/hardware/linksys/wrt54g_v20/ifconfig.txt b/hardware/linksys/wrt54g_v20/ifconfig.txt
new file mode 100644 (file)
index 0000000..97922e0
--- /dev/null
@@ -0,0 +1,46 @@
+br0       Link encap:Ethernet  HWaddr 00:0F:66:D3:11:8E  
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:370 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:232 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:22641 (22.1 KiB)  TX bytes:37549 (36.6 KiB)
+
+eth0      Link encap:Ethernet  HWaddr 00:0F:66:D3:11:8E  
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:110 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:548 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:23978 (23.4 KiB)  TX bytes:69928 (68.2 KiB)
+          Interrupt:5 Base address:0x2000 
+
+eth1      Link encap:Ethernet  HWaddr 00:0F:66:D3:11:90  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:479 errors:0 dropped:0 overruns:0 frame:2
+          TX packets:407 errors:4 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:37211 (36.3 KiB)  TX bytes:73096 (71.3 KiB)
+          Interrupt:4 Base address:0x1000 
+
+lo        Link encap:Local Loopback  
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan0     Link encap:Ethernet  HWaddr 00:0F:66:D3:11:8E  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:110 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:276 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:21998 (21.4 KiB)  TX bytes:29605 (28.9 KiB)
+
+vlan1     Link encap:Ethernet  HWaddr 00:0F:66:D3:11:8E  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:272 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:40323 (39.3 KiB)
+
diff --git a/hardware/linksys/wrt54g_v20/info.txt b/hardware/linksys/wrt54g_v20/info.txt
new file mode 100644 (file)
index 0000000..8278e09
--- /dev/null
@@ -0,0 +1,19 @@
+Linksys WRT54G v2.0
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731)
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+ifconfig.txt: output of ifconfig (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg (XH model, 2.4.29)
diff --git a/hardware/linksys/wrt54g_v20/nvram.txt b/hardware/linksys/wrt54g_v20/nvram.txt
new file mode 100644 (file)
index 0000000..6c37ad6
--- /dev/null
@@ -0,0 +1,113 @@
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=on
+il0macaddr=00:0f:66:d3:11:90
+boardrev=0x10
+et0macaddr=00:0F:66:D3:11:8E
+wl0_wep_buf=
+watchdog=5000
+boot_wait=on
+wl0_macmode1=disabled
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+wl0_ap_ssid=
+pmon_ver=CFE 3.51.21.0
+wl0_ifname=eth1
+gpio2=adm_eecs
+gpio3=adm_eesk
+ifnames=vlan0 vlan1
+vlan0ports=1 2 3 4 5*
+gpio5=adm_eedi
+gpio6=adm_rc
+wl0_mrate=0
+wl0_mode=ap
+wl0_ap_isolate=0
+os_flash_addr=bfc40000
+wl0_gmode=1
+sromrev=2
+boardtype=0x0101
+wl0_wep_last=
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=b0rken
+wl0_key1=
+wl0id=0x4320
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl_auth_mode=open
+ag0=255
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=1
+wl0_macmode=disabled
+wl0_radioids=BCM2050
+wl0_phytype=g
+wl0gpio2=0
+wl0_lazywds=1
+wl0gpio3=0
+boardflags2=0
+wl0_afterburner=auto
+lan_hwaddr=00:0F:66:D3:11:8E
+wl0_antdiv=-1
+wl0_mac_list=
+wl0_unit=0
+wl_country_code=AU
+pa0itssit=62
+wl0_wds=
+cctl=0
+lan_ifnames=vlan0 vlan1 eth1
+wl0_radius_port=1812
+wl0_mac_deny=
+wl0_auth=0
+wl0_radius_ipaddr=
+pa0maxpwr=0x48
+wan_ifnames=vlan1
+wl_crypto=tkip
+lan_proto=static
+lan_ipaddr=192.168.1.1
+clkfreq=200
+aa0=3
+vlan1hwname=et0
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+sdram_config=0x0032
+wl0_country=Worldwide
+vlan1ports=0 5
+scratch=a0180000
+ccode=0
+wl0_rateset=default
+wl0_wep_bit=64
+lan_ifname=br0
+boardflags=0x0188
+wl0_afterburner_override=-1
+sdram_refresh=0x0000
+sdram_ncdl=0x25
+wl0_passphrase=
+wl0_rts=2347
+wl_wep=disabled
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+wl0_active_mac=
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:0F:66:D3:11:90
+wl0_wep_gen=
+wl0_gmode_protection=auto
+pa0b0=0x170c
+wl0_maclist=
+pa0b1=0xfa24
+pa0b2=0xfe70
+sdram_init=0x0000
+vlan0hwname=et0
+dl_ram_addr=a0001000
+wl0_radius_key=
+wl0_corerev=7
+wl0_channel=6
+wl0_auth_mode=open
+boot_ver=v2.3
+boardnum=42
+wl0_ap_ip=
diff --git a/hardware/linksys/wrt54g_v20/pci.txt b/hardware/linksys/wrt54g_v20/pci.txt
new file mode 100644 (file)
index 0000000..cd7aafc
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/linksys/wrt54g_v22/cpuinfo.txt b/hardware/linksys/wrt54g_v22/cpuinfo.txt
new file mode 100644 (file)
index 0000000..dd54f9c
--- /dev/null
@@ -0,0 +1,16 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.06
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
+dcache hits             : 4244635257
+dcache misses           : 1073741821
+icache hits             : 4181718158
+icache misses           : 4080970363
+instructions            : 0
diff --git a/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt b/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..ee7151d
--- /dev/null
@@ -0,0 +1,117 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005
+Determined physical RAM map:
+memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.06 BogoMIPS
+Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x2000,blocks=8
+1: offset=0x10000,size=0x10000,blocks=63
+Using word write method
+Flash device: 0x400000 at 0x1c000000
+Physically mapped flash: squashfs filesystem found at block 946
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000ec990-0x001ceb48 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x001d0000-0x003f0000 : "OpenWrt"
+sflash: found no supported devices
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000708
+using v1 hardware
+led -> 00
+led -> 01
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=0
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+1:(0x00)         value=0x0000
+2:(0x00)         value=0x0000
+1:(0x13)         value=0x001e
+2:(0x13)         value=0x001e
+1:(0x00)         value=0x0000
+2:(0x00)         value=0x0000
+1:(0x13)         value=0x001e
+2:(0x13)         value=0x001e
+1:(0x00)         value=0x0000
+2:(0x00)         value=0x0000
+1:(0x13)         value=0x001e
+2:(0x13)         value=0x001e
+1:(0x00)         value=0x0000
+2:(0x00)         value=0x0000
+1:(0x13)         value=0x001e
+2:(0x13)         value=0x001e
+1:(0x00)         value=0x0000
+2:(0x00)         value=0x0000
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: Setting MAC address to  00 12 17 cc cd 25.
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
+led -> 00
+
diff --git a/hardware/linksys/wrt54g_v22/ifconfig.txt b/hardware/linksys/wrt54g_v22/ifconfig.txt
new file mode 100644 (file)
index 0000000..48cbbe5
--- /dev/null
@@ -0,0 +1,46 @@
+br0       Link encap:Ethernet  HWaddr 00:12:17:CC:CD:24
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:125 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:97 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:5155 (5.0 KiB)  TX bytes:22844 (22.3 KiB)
+
+eth0      Link encap:Ethernet  HWaddr 00:12:17:CC:CD:24
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:125 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:97 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:8554 (8.3 KiB)  TX bytes:23232 (22.6 KiB)
+          Interrupt:5 Base address:0x2000
+
+eth1      Link encap:Ethernet  HWaddr 00:12:17:CC:CD:26
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:3083
+          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:0 (0.0 B)  TX bytes:50 (50.0 B)
+          Interrupt:4 Base address:0x1000
+
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan0     Link encap:Ethernet  HWaddr 00:12:17:CC:CD:24
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:125 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:97 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:6304 (6.1 KiB)  TX bytes:23232 (22.6 KiB)
+
+vlan1     Link encap:Ethernet  HWaddr 00:12:17:CC:CD:25
+          inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
diff --git a/hardware/linksys/wrt54g_v22/info.txt b/hardware/linksys/wrt54g_v22/info.txt
new file mode 100644 (file)
index 0000000..e9b2ccd
--- /dev/null
@@ -0,0 +1,18 @@
+Linksys WRT54G v2.2
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/hardware/linksys/wrt54g_v22/nvram.txt b/hardware/linksys/wrt54g_v22/nvram.txt
new file mode 100644 (file)
index 0000000..02c765e
--- /dev/null
@@ -0,0 +1,477 @@
+
+Intel_firmware_version=v1.41.8
+QoS=0
+aa0=3
+action_service=start_ping
+action_service_arg1=
+ag0=255
+aol_block_traffic1=0
+aol_block_traffic2=0
+aol_block_traffic=0
+autofw_port0=
+bcm4712_firmware_version=v1.50.0
+block_activex=0
+block_cookie=0
+block_java=0
+block_loopback=0
+block_proxy=0
+block_wan=1
+boardflags2=0
+boardflags=0x0118
+boardnum=42
+boardrev=0x10
+boardtype=0x0708
+boot_ver=v3.4
+boot_wait=on
+bootnv_ver=2
+ccode=0
+cctl=0
+clkfreq=200
+console_loglevel=1
+ct_modules=
+d11g_bcn=100
+d11g_channel=11
+d11g_dtim=1
+d11g_frag=2346
+d11g_mode=1
+d11g_rate=0
+d11g_rateset=default
+d11g_rts=2347
+daylight_time=1
+ddns_cache=
+ddns_change=
+ddns_enable=0
+ddns_enable_buf=
+ddns_hostname=
+ddns_hostname_2=
+ddns_hostname_buf=
+ddns_interval=60
+ddns_passwd=
+ddns_passwd_2=
+ddns_passwd_buf=
+ddns_status=
+ddns_username=
+ddns_username_2=
+ddns_username_buf=
+def_hwaddr=00:00:00:00:00:00
+dhcp_domain=wan
+dhcp_lease=0
+dhcp_num=50
+dhcp_start=100
+dhcp_wins=wan
+dl_ram_addr=a0001000
+dmz_enable=0
+dmz_ipaddr=0
+dr_lan_rx=0
+dr_lan_tx=0
+dr_setting=0
+dr_wan_rx=0
+dr_wan_tx=0
+eou_configured=1
+eou_device_id=CXLVVGWQ
+eou_expired_hour=72
+eou_key_index=1
+eou_private_key=a752d99baa01b0889aee1c9bc9e49fd05a046e7183f9f21c21caa2bf832f341a98c2d2b6d299dd621cba5a02c7da6f36d5881cb29a0306483e63b74e3321b39c1b6e88d66ec200adbbc04412ae6a744bcf6530fdcfea8106e340c8012cadf32ddb37ff714c9588b1d0c141381433f1f0f96cabf9336002a87d39b24181193bf1
+eou_public_key=b1c8073564a1cb91249cfe658682e9cd5fa4b5589c39913de3e74ceb7b62275c424effe23fc37b383e85ffa2f458162a42e09e7dc3a336acc249f2c31653ced787dd8aae9eb3335c17569f2c17e677170ec9ad119ba6541065c760e096fd230e5ef4592e1dc2a9efbf564d666df5ac200b0c6dd96e2d33edb773f95cab4650c111
+et0macaddr=00:12:17:CC:CD:24
+et0mdcport=0
+et0phyaddr=30
+ezc_enable=1
+ezc_version=2
+filter=on
+filter_client0=
+filter_dport_grp10=
+filter_dport_grp1=
+filter_dport_grp2=
+filter_dport_grp3=
+filter_dport_grp4=
+filter_dport_grp5=
+filter_dport_grp6=
+filter_dport_grp7=
+filter_dport_grp8=
+filter_dport_grp9=
+filter_id=1
+filter_ip_grp10=
+filter_ip_grp1=
+filter_ip_grp2=
+filter_ip_grp3=
+filter_ip_grp4=
+filter_ip_grp5=
+filter_ip_grp6=
+filter_ip_grp7=
+filter_ip_grp8=
+filter_ip_grp9=
+filter_mac_grp10=
+filter_mac_grp1=
+filter_mac_grp2=
+filter_mac_grp3=
+filter_mac_grp4=
+filter_mac_grp5=
+filter_mac_grp6=
+filter_mac_grp7=
+filter_mac_grp8=
+filter_mac_grp9=
+filter_maclist=
+filter_macmode=deny
+filter_port=
+filter_port_grp10=
+filter_port_grp1=
+filter_port_grp2=
+filter_port_grp3=
+filter_port_grp4=
+filter_port_grp5=
+filter_port_grp6=
+filter_port_grp7=
+filter_port_grp8=
+filter_port_grp9=
+filter_rule10=
+filter_rule1=
+filter_rule2=
+filter_rule3=
+filter_rule4=
+filter_rule5=
+filter_rule6=
+filter_rule7=
+filter_rule8=
+filter_rule9=
+filter_services=$NAME:003:DNS$PROT:003:udp$PORT:005:53:53<&nbsp;>$NAME:004:Ping$PROT:004:icmp$PORT:003:0:0<&nbsp;>$NAME:004:HTTP$PROT:003:tcp$PORT:005:80:80<&nbsp;>$NAME:005:HTTPS$PROT:003:tcp$PORT:007:443:443<&nbsp;>$NAME:003:FTP$PROT:003:tcp$PORT:005:21:21<&nbsp;>$NAME:004:POP3$PROT:003:tcp$PORT:007:110:110<&nbsp;>$NAME:004:IMAP$PROT:003:tcp$PORT:007:143:143<&nbsp;>$NAME:004:SMTP$PROT:003:tcp$PORT:005:25:25<&nbsp;>$NAME:004:NNTP$PROT:003:tcp$PORT:007:119:119<&nbsp;>$NAME:006:Telnet$PROT:003:tcp$PORT:005:23:23<&nbsp;>$NAME:004:SNMP$PROT:003:udp$PORT:007:161:161<&nbsp;>$NAME:004:TFTP$PROT:003:udp$PORT:005:69:69<&nbsp;>$NAME:003:IKE$PROT:003:udp$PORT:007:500:500<&nbsp;>
+filter_tod10=
+filter_tod1=
+filter_tod2=
+filter_tod3=
+filter_tod4=
+filter_tod5=
+filter_tod6=
+filter_tod7=
+filter_tod8=
+filter_tod9=
+filter_tod_buf10=
+filter_tod_buf1=
+filter_tod_buf2=
+filter_tod_buf3=
+filter_tod_buf4=
+filter_tod_buf5=
+filter_tod_buf6=
+filter_tod_buf7=
+filter_tod_buf8=
+filter_tod_buf9=
+filter_web_host10=
+filter_web_host1=
+filter_web_host2=
+filter_web_host3=
+filter_web_host4=
+filter_web_host5=
+filter_web_host6=
+filter_web_host7=
+filter_web_host8=
+filter_web_host9=
+filter_web_url10=
+filter_web_url1=
+filter_web_url2=
+filter_web_url3=
+filter_web_url4=
+filter_web_url5=
+filter_web_url6=
+filter_web_url7=
+filter_web_url8=
+filter_web_url9=
+firmware_version=v3.03.1
+flash_type=Intel 28F320C3 2Mx16 BotB
+forward_port=
+fw_disable=0
+gpio5=robo_reset
+hb_server_domain=
+hb_server_ip=
+http_client_ip=192.168.1.2
+http_client_mac=00:D0:59:9D:7C:8D
+http_enable=1
+http_lanport=80
+http_method=post
+http_passwd=admin
+http_username=
+http_wanport=8080
+https_enable=0
+ident_pass=0
+il0macaddr=00:12:17:cc:cd:26
+ipsec_pass=1
+is_default=0
+is_modified=1
+l2tp_get_ip=
+l2tp_pass=1
+l2tp_server_ip=
+lan_domain=
+lan_hwaddr=00:12:17:CC:CD:24
+lan_hwnames=
+lan_ifname=br0
+lan_ifnames=vlan0 eth1 eth2 eth3
+lan_ipaddr=192.168.1.1
+lan_lease=86400
+lan_netmask=255.255.255.0
+lan_proto=static
+lan_stp=0
+lan_wins=
+log_enable=0
+log_ipaddr=0
+log_level=0
+mac_clone_enable=0
+manual_rate=0
+mtu_enable=0
+multicast_pass=0
+ntp_mode=auto
+ntp_server=
+os_date=Oct 18 2004
+os_flash_addr=bfc40000
+os_name=linux
+os_ram_addr=80001000
+os_server=
+os_version=3.61.13.0
+pa0b0=0x15eb
+pa0b1=0xfa82
+pa0b2=0xfe66
+pa0itssit=62
+pa0maxpwr=0x4e
+ping_ip=;*/n${IFS}show>tmp/ping.log
+ping_times=5
+pmon_ver=CFE 3.61.13.0
+port_flow_control_1=1
+port_flow_control_2=1
+port_flow_control_3=1
+port_flow_control_4=1
+port_priority_1=0
+port_priority_2=0
+port_priority_3=0
+port_priority_4=0
+port_rate_limit_1=0
+port_rate_limit_2=0
+port_rate_limit_3=0
+port_rate_limit_4=0
+port_trigger=
+ppp_ac=
+ppp_demand=1
+ppp_get_ac=
+ppp_get_srv=
+ppp_idletime=5
+ppp_keepalive=0
+ppp_mru=1500
+ppp_mtu=1500
+ppp_passwd=
+ppp_redialperiod=30
+ppp_service=
+ppp_static=0
+ppp_static_ip=
+ppp_username=
+pppoe_ac=
+pppoe_demand=1
+pppoe_idletime=5
+pppoe_ifname=
+pppoe_keepalive=0
+pppoe_passwd=
+pppoe_service=
+pppoe_static=0
+pppoe_static_ip=
+pppoe_username=
+pptp_get_ip=
+pptp_pass=1
+pptp_server_ip=
+qos_appname1=
+qos_appname2=
+qos_appname3=
+qos_appport1=0
+qos_appport2=0
+qos_appport3=0
+qos_devmac1=00:00:00:00:00:00
+qos_devmac2=00:00:00:00:00:00
+qos_devname1=
+qos_devname2=
+qos_devpri1=0
+qos_devpri2=0
+rate_mode=1
+remote_management=0
+remote_mgt_https=0
+restore_defaults=0
+router_disable=0
+router_name=WRT54G
+scratch=a0180000
+sdram_config=0x0062
+sdram_init=0x000b
+sdram_ncdl=0xfd0009
+sdram_refresh=0x0000
+security_mode=disabled
+security_mode_last=
+sel_qosftp=0
+sel_qoshttp=0
+sel_qospop3=0
+sel_qosport1=0
+sel_qosport2=0
+sel_qosport3=0
+sel_qossmtp=0
+sel_qostelnet=0
+skip_amd_check=0
+skip_intel_check=0
+sromrev=2
+static_route=
+static_route_name=
+stats_server=
+time_zone=-08 1 1
+timer_interval=30
+traceroute_ip=
+upnp_enable=1
+upnp_wan_proto=
+vlan0hwname=et0
+vlan0ports=1 2 3 4 5*
+vlan1hwname=et0
+vlan1ports=0 5
+wan_dns=
+wan_domain=
+wan_gateway=10.0.0.254
+wan_gateway_buf=0.0.0.0
+wan_get_dns=
+wan_get_domain=
+wan_hostname=
+wan_hwaddr=00:12:17:CC:CD:25
+wan_hwname=
+wan_iface=vlan1
+wan_ifname=vlan1
+wan_ifnames=vlan1
+wan_ipaddr=10.0.0.1
+wan_ipaddr_buf=0.0.0.0
+wan_lease=0
+wan_mtu=1500
+wan_netmask=255.255.255.0
+wan_primary=1
+wan_proto=static
+wan_run_mtu=1500
+wan_unit=0
+wan_wins=
+watchdog=5000
+web_wl_filter=0
+wk_mode=gateway
+wl0_active_mac=
+wl0_afterburner=off
+wl0_antdiv=-1
+wl0_ap_ip=
+wl0_ap_isolate=0
+wl0_ap_ssid=
+wl0_auth=0
+wl0_auth_mode=open
+wl0_bcn=100
+wl0_channel=11
+wl0_closed=0
+wl0_corerev=7
+wl0_country=Worldwide
+wl0_country_code=AU
+wl0_crypto=tkip
+wl0_dtim=1
+wl0_frag=2346
+wl0_frameburst=off
+wl0_gmode=1
+wl0_gmode_protection=off
+wl0_hwaddr=00:12:17:CC:CD:26
+wl0_ifname=eth1
+wl0_infra=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_key=1
+wl0_lazywds=1
+wl0_mac_deny=
+wl0_mac_list=
+wl0_maclist=
+wl0_macmode1=disabled
+wl0_macmode=disabled
+wl0_mode=ap
+wl0_mrate=0
+wl0_net_mode=mixed
+wl0_passphrase=
+wl0_phytype=g
+wl0_phytypes=g
+wl0_plcphdr=long
+wl0_radio=1
+wl0_radioids=BCM2050
+wl0_radius_ipaddr=
+wl0_radius_key=
+wl0_radius_port=1812
+wl0_rate=0
+wl0_rateset=default
+wl0_rts=2347
+wl0_ssid=linksys
+wl0_unit=0
+wl0_wds=
+wl0_wep=disabled
+wl0_wep_bit=64
+wl0_wep_buf=
+wl0_wep_gen=
+wl0_wep_last=
+wl0_wpa_gtk_rekey=3600
+wl0_wpa_psk=
+wl0gpio2=0
+wl0gpio3=0
+wl0id=0x4320
+wl_active_add_mac=0
+wl_active_mac=
+wl_afterburner=off
+wl_antdiv=-1
+wl_ap_ip=
+wl_ap_isolate=0
+wl_ap_ssid=
+wl_atten_bb=3
+wl_atten_ctl=48
+wl_atten_radio=4
+wl_auth=0
+wl_auth_mode=open
+wl_bcn=100
+wl_cck= 3
+wl_channel=11
+wl_closed=0
+wl_corerev=
+wl_country=Worldwide
+wl_country_code=AU
+wl_crypto=tkip
+wl_delay=1
+wl_dtim=1
+wl_frag=2346
+wl_frameburst=off
+wl_gmode=1
+wl_gmode_protection=off
+wl_hwaddr=
+wl_ifname=
+wl_infra=1
+wl_key1=
+wl_key2=
+wl_key3=
+wl_key4=
+wl_key=1
+wl_lazywds=1
+wl_mac_deny=
+wl_mac_list=
+wl_maclist=
+wl_macmode1=disabled
+wl_macmode=disabled
+wl_mode=ap
+wl_mrate=0
+wl_net_mode=mixed
+wl_ofdm= 0
+wl_passphrase=
+wl_phytype=g
+wl_phytypes=
+wl_plcphdr=long
+wl_radio=1
+wl_radioids=
+wl_radius_ipaddr=
+wl_radius_key=
+wl_radius_port=1812
+wl_rate=0
+wl_rateset=default
+wl_rts=2347
+wl_ssid=linksys
+wl_tssi_result= 3
+wl_unit=0
+wl_wds=
+wl_wep=disabled
+wl_wep_bit=64
+wl_wep_buf=
+wl_wep_gen=
+wl_wep_last=
+wl_wpa_gtk_rekey=3600
+wl_wpa_psk=
diff --git a/hardware/linksys/wrt54g_v22/pci.txt b/hardware/linksys/wrt54g_v22/pci.txt
new file mode 100644 (file)
index 0000000..2be1726
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/linksys/wrt54gs_v10/cpuinfo.txt b/hardware/linksys/wrt54gs_v10/cpuinfo.txt
new file mode 100644 (file)
index 0000000..404c148
--- /dev/null
@@ -0,0 +1,16 @@
+system type   : Broadcom BCM947XX
+processor   : 0
+cpu model   : BCM3302 V0.7
+BogoMIPS    : 199.06
+wait instruction  : no
+microsecond timers  : yes
+tlb_entries   : 32
+extra interrupt vector  : no
+hardware watchpoint : no
+VCED exceptions   : not available
+VCEI exceptions   : not available
+dcache hits   : 4278190076
+dcache misses   : 1840115641
+icache hits   : 4294967071
+icache misses   : 4294967287
+instructions    : 0
diff --git a/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt b/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..de5f8d8
--- /dev/null
@@ -0,0 +1,88 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Mon Feb 21 17:40:12 CET 2005
+Determined physical RAM map:
+memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.06 BogoMIPS
+Memory: 30260k/32768k available (1477k kernel code, 2508k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x20000,blocks=64
+Using buffer write method
+Flash device: 0x800000 at 0x1c000000
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x007e0000 : "linux"
+0x00100000-0x002a0000 : "rootfs"
+0x007e0000-0x00800000 : "nvram"
+0x002a0000-0x007e0000 : "OpenWrt"
+sflash: found no supported devices
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+led -> 00
+led -> 01
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/hardware/linksys/wrt54gs_v10/ifconfig.txt b/hardware/linksys/wrt54gs_v10/ifconfig.txt
new file mode 100644 (file)
index 0000000..8e205ef
--- /dev/null
@@ -0,0 +1,45 @@
+br0       Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+eth0      Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:0 (0.0 B)  TX bytes:39204 (38.2 KiB)
+          Interrupt:5 Base address:0x2000
+
+eth1      Link encap:Ethernet  HWaddr 00:0F:66:C8:74:46
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:7245
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+          Interrupt:4 Base address:0x1000
+
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan0     Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan1     Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:39204 (38.2 KiB)
diff --git a/hardware/linksys/wrt54gs_v10/info.txt b/hardware/linksys/wrt54gs_v10/info.txt
new file mode 100644 (file)
index 0000000..23c2271
--- /dev/null
@@ -0,0 +1,18 @@
+Linksys WRT54GS v1.0
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610
+
+CPU: BCM4712 at 200 MHz
+RAM: 32 MB
+Flash: 8 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after nvram erase in CFE 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/hardware/linksys/wrt54gs_v10/nvram.txt b/hardware/linksys/wrt54gs_v10/nvram.txt
new file mode 100644 (file)
index 0000000..bf70a4b
--- /dev/null
@@ -0,0 +1,105 @@
+aa0=3
+ag0=255
+boardflags2=0
+boardflags=0x0388
+boardnum=42
+boardrev=0x10
+boardtype=0x0101
+boot_ver=v3.2
+boot_wait=yes
+ccode=0
+cctl=0
+clkfreq=200
+dl_ram_addr=a0001000
+et0macaddr=00:0F:66:C8:74:44
+et0mdcport=0
+et0phyaddr=30
+gpio2=adm_eecs
+gpio3=adm_eesk
+gpio5=adm_eedi
+gpio6=adm_rc
+il0macaddr=00:0f:66:c8:74:46
+lan_ipaddr=192.168.1.1
+lan_netmask=255.255.255.0
+os_flash_addr=bfc40000
+os_ram_addr=80001000
+pa0b0=0x170c
+pa0b1=0xfa24
+pa0b2=0xfe70
+pa0itssit=62
+pa0maxpwr=0x48
+pmon_ver=CFE 3.61.13.0
+scratch=a0180000
+sdram_config=0x0022
+sdram_init=0x0008
+sdram_ncdl=0x24
+sdram_refresh=0x0000
+sromrev=2
+vlan0hwname=et0
+vlan0ports=1 2 3 4 5*
+vlan1hwname=et0
+vlan1ports=0 5
+watchdog=5000
+wl0_active_mac=
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_ap_ip=
+wl0_ap_isolate=0
+wl0_ap_ssid=
+wl0_auth=0
+wl0_auth_mode=open
+wl0_bcn=100
+wl0_channel=6
+wl0_closed=0
+wl0_corerev=7
+wl0_country=Worldwide
+wl0_country_code=AU
+wl0_crypto=tkip
+wl0_dtim=1
+wl0_frag=2346
+wl0_frameburst=on
+wl0_gmode=6
+wl0_gmode_protection=off
+wl0_hwaddr=00:0F:66:C8:74:46
+wl0_ifname=eth1
+wl0_infra=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_key=1
+wl0_lazywds=1
+wl0_mac_deny=
+wl0_mac_list=
+wl0_maclist=
+wl0_macmode1=disabled
+wl0_macmode=disabled
+wl0_mode=ap
+wl0_mrate=0
+wl0_net_mode=mixed
+wl0_passphrase=
+wl0_phytype=g
+wl0_phytypes=g
+wl0_plcphdr=long
+wl0_radio=1
+wl0_radioids=BCM2050
+wl0_radius_ipaddr=
+wl0_radius_key=
+wl0_radius_port=1812
+wl0_rate=0
+wl0_rateset=default
+wl0_rts=2347
+wl0_ssid=linksys
+wl0_unit=0
+wl0_wds=
+wl0_wep=disabled
+wl0_wep_bit=64
+wl0_wep_buf=
+wl0_wep_gen=
+wl0_wep_last=
+wl0_wpa_gtk_rekey=3600
+wl0_wpa_psk=
+wl0gpio2=0
+wl0gpio3=0
+wl0id=0x4320
+wl_country_code=AU
diff --git a/hardware/linksys/wrt54gs_v10/pci.txt b/hardware/linksys/wrt54gs_v10/pci.txt
new file mode 100644 (file)
index 0000000..2be1726
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/linksys/wrt54gs_v11/cpuinfo.txt b/hardware/linksys/wrt54gs_v11/cpuinfo.txt
new file mode 100644 (file)
index 0000000..8a5ba8f
--- /dev/null
@@ -0,0 +1,11 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 215.44
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
diff --git a/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt b/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt
new file mode 100644 (file)
index 0000000..22afd53
--- /dev/null
@@ -0,0 +1,83 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST
+Determined physical RAM map:
+ memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 216 MHz
+Using 108.000 MHz high precision timer.
+Calibrating delay loop... 215.44 BogoMIPS
+Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x20000,blocks=64
+Using buffer write method
+Flash device: 0x800000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x007e0000 : "linux"
+0x000c0000-0x007e0000 : "rootfs"
+0x007e0000-0x00800000 : "nvram"
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000708
+jffs2.bbc: SIZE compression mode activated.
+b44.c:v0.93 (Mar, 2004)
+PCI: Setting latency timer of device 00:02.0 to 64
+eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/hardware/linksys/wrt54gs_v11/info.txt b/hardware/linksys/wrt54gs_v11/info.txt
new file mode 100644 (file)
index 0000000..325f4cd
--- /dev/null
@@ -0,0 +1,21 @@
+Linksys WRT54GS v1.1
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610
+
+CPU: BCM4712 at 216 MHz
+RAM: 32 MB
+Flash: 8 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed
+cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30)
+pci.txt:  contents of /proc/pci (2.4.30)
+dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg)
+
+Notes:
+CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load.
diff --git a/hardware/linksys/wrt54gs_v11/nvram.txt b/hardware/linksys/wrt54gs_v11/nvram.txt
new file mode 100644 (file)
index 0000000..9baf982
--- /dev/null
@@ -0,0 +1,94 @@
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=off
+boardrev=0x10
+il0macaddr=00:13:10:07:ee:fe
+bootnv_ver=2
+et0macaddr=00:13:10:07:EE:FC
+boot_wait=on
+watchdog=5000
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+pmon_ver=CFE 3.61.13.0
+wl0_ifname=eth1
+gpio5=robo_reset
+vlan0ports=1 2 3 4 5*
+wl0_mode=ap
+wl0_ap_isolate=0
+os_flash_addr=bfc40000
+wl0_gmode=6
+sromrev=2
+boardtype=0x0708
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=OpenWrt
+wl0_key1=
+wl0id=0x4320
+wl0_key2=
+wl0_key3=
+wl0_key4=
+ag0=255
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl0_radioids=BCM2050
+wl0_phytype=g
+wl0gpio2=0
+wl0_lazywds=0
+wl0gpio3=0
+boardflags2=0
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_wpa_psk=
+wl0_unit=0
+wl_country_code=AU
+pa0itssit=62
+wl0_wds=
+cctl=0
+wl0_radius_port=1812
+wl0_auth=0
+wl0_radius_ipaddr=
+pa0maxpwr=0x4e
+clkfreq=216
+lan_ipaddr=192.168.1.1
+vlan1hwname=et0
+aa0=3
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+sdram_config=0x0062
+wl0_country=
+vlan1ports=0 5
+scratch=a0180000
+eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9
+ccode=0
+wl0_rateset=default
+eou_device_id=F7QVRQQK
+boardflags=0x0318
+sdram_refresh=0x0000
+sdram_ncdl=0xff0007
+wl0_rts=2347
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:13:10:07:EE:FE
+wl0_gmode_protection=auto
+pa0b0=0x15eb
+wl0_maclist=
+pa0b1=0xfa82
+pa0b2=0xfe66
+sdram_init=0x000b
+vlan0hwname=et0
+dl_ram_addr=a0001000
+wl0_radius_key=
+wl0_corerev=7
+wl0_channel=11
+wl0_auth_mode=open
+boot_ver=v3.4
+wl0_crypto=tkip
+boardnum=42
+eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11
diff --git a/hardware/linksys/wrt54gs_v11/pci.txt b/hardware/linksys/wrt54gs_v11/pci.txt
new file mode 100644 (file)
index 0000000..2be1726
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/motorola/WR850Gv2/cpuinfo.txt b/hardware/motorola/WR850Gv2/cpuinfo.txt
new file mode 100755 (executable)
index 0000000..4e960e3
--- /dev/null
@@ -0,0 +1,16 @@
+system type            : Broadcom BCM947XX
+processor              : 0
+cpu model              : BCM3302 V0.7
+BogoMIPS               : 199.06
+wait instruction       : no
+microsecond timers     : yes
+tlb_entries            : 32
+extra interrupt vector : no
+hardware watchpoint    : no
+VCED exceptions                : not available
+VCEI exceptions                : not available
+dcache hits            : 3472883705
+dcache misses          : 2645294829
+icache hits            : 4257216234
+icache misses          : 4290730622
+instructions           : 0
diff --git a/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt b/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt
new file mode 100755 (executable)
index 0000000..2d8b4b8
--- /dev/null
@@ -0,0 +1,97 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (root@reboot2.lan) (gcc version 3.3.5) #1 Fri Mar 4 02:35:42 EST 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.06 BogoMIPS
+Memory: 14036k/16384k available (1482k kernel code, 2348k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x20000,blocks=32
+Using buffer write method
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003e0000 : "linux"
+0x00100000-0x003e0000 : "rootfs"
+0x003e0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+cramfs: wrong magic
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E  phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
+br0: port 2(eth1) entering disabled state
+br0: port 1(vlan0) entering disabled state
+br0: port 2(eth1) entering disabled state
+device eth1 left promiscuous mode
+br0: port 1(vlan0) entering disabled state
+device vlan0 left promiscuous mode
diff --git a/hardware/motorola/WR850Gv2/ifconfig.txt b/hardware/motorola/WR850Gv2/ifconfig.txt
new file mode 100755 (executable)
index 0000000..9e61bc6
--- /dev/null
@@ -0,0 +1,39 @@
+eth0      Link encap:Ethernet  HWaddr 00:11:22:33:44:55  
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:32241 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:64392 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:2192583 (2.0 MiB)  TX bytes:91374468 (87.1 MiB)
+          Interrupt:5 Base address:0x2000 
+
+eth1      Link encap:Ethernet  HWaddr 00:90:4C:75:04:00  
+          inet addr:192.168.0.100  Bcast:192.168.0.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:823 errors:0 dropped:0 overruns:0 frame:37474
+          TX packets:753 errors:2 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:68341 (66.7 KiB)  TX bytes:69022 (67.4 KiB)
+          Interrupt:4 Base address:0x1000 
+
+lo        Link encap:Local Loopback  
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan0     Link encap:Ethernet  HWaddr 00:11:22:33:44:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:32241 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:64293 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:1612245 (1.5 MiB)  TX bytes:91315662 (87.0 MiB)
+
+vlan1     Link encap:Ethernet  HWaddr 00:11:22:33:44:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:99 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:58806 (57.4 KiB)
+
diff --git a/hardware/motorola/WR850Gv2/nvram.txt b/hardware/motorola/WR850Gv2/nvram.txt
new file mode 100755 (executable)
index 0000000..24837d4
--- /dev/null
@@ -0,0 +1,52 @@
+boardtype=0x0101
+boardnum=44
+boardrev=0x10
+boardflags=0x0188
+boardflags2=0
+sromrev=2
+clkfreq=200
+sdram_init=0x0
+sdram_config=0x0032
+sdram_refresh=0x0000
+sdram_ncdl=0x21
+et0macaddr=00:11:22:33:44:55
+et0phyaddr=30
+et0mdcport=0
+et1macaddr=00:11:22:33:44:56
+gpio2=adm_eecs
+gpio3=adm_eesk
+gpio4=adm_eedi
+gpio5=adm_rc
+vlan0ports=0 1 2 3 5*
+vlan0hwname=et0
+vlan1ports=4 5
+vlan1hwname=et0
+et1phyaddr=0x1f
+wl0id=0x4320
+il0macaddr=00:90:4c:75:04:00
+aa0=3
+ag0=255
+pa0maxpwr=60
+pa0itssit=62
+pa0b0=0x119a
+pa0b1=0xfb93
+pa0b2=0xfea5
+wl0gpio0=0
+wl0gpio1=0
+wl0gpio2=0
+wl0gpio3=0
+wlogpio4=0
+wl0gpio5=0
+cctl=0
+ccode=0
+dl_ram_addr=a0001000
+os_ram_addr=80001000
+os_flash_addr=bfc40000
+lan_ipaddr=192.168.1.1
+lan_netmask=255.255.255.0
+scratch=a0180000
+boot_wait=off
+watchdog=0
+move_to_defaults=1
+CFEver=MotoWRv203
+flag_MAC=1
diff --git a/hardware/motorola/WR850Gv2/pci.txt b/hardware/motorola/WR850Gv2/pci.txt
new file mode 100755 (executable)
index 0000000..cd7aafc
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
diff --git a/hardware/soekris/net4801/cpuinfo.txt b/hardware/soekris/net4801/cpuinfo.txt
new file mode 100644 (file)
index 0000000..6e9e9cb
--- /dev/null
@@ -0,0 +1,18 @@
+root@OpenWrt:/# cat /proc/cpuinfo \e[J
+processor      : 0
+vendor_id      : Geode by NSC
+cpu family     : 5
+model          : 9
+model name     : Unknown
+stepping       : 1
+cpu MHz                : 266.650
+fdiv_bug       : no
+hlt_bug                : no
+f00f_bug       : no
+coma_bug       : no
+fpu            : yes
+fpu_exception  : yes
+cpuid level    : 2
+wp             : yes
+flags          : fpu tsc msr cx8 cmov mmx cxmmx
+bogomips       : 532.48
diff --git a/hardware/soekris/net4801/dmesg-2.4.30.txt b/hardware/soekris/net4801/dmesg-2.4.30.txt
new file mode 100644 (file)
index 0000000..afde786
--- /dev/null
@@ -0,0 +1,104 @@
+Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005
+BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
+ BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
+ BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+ BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
+ BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
+128MB LOWMEM available.
+On node 0 totalpages: 32768
+zone(0): 4096 pages.
+zone(1): 28672 pages.
+zone(2): 0 pages.
+DMI not present.
+Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8 
+Initializing CPU#0
+Detected 266.650 MHz processor.
+Calibrating delay loop... 532.48 BogoMIPS
+Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem)
+Checking if this processor honours the WP bit even in supervisor mode... Ok.
+Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
+Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
+Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
+CPU:     After generic, caps: 00808131 00818131 00000000 00000001
+CPU:             Common caps: 00808131 00818131 00000000 00000001
+CPU: NSC Unknown stepping 01
+Checking 'hlt' instruction... OK.
+POSIX conformance testing by UNIFIX
+PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0
+PCI: Using configuration type 1
+PCI: Probing PCI hardware
+PCI: Probing PCI hardware (bus 00)
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0x03f8 (irq = 4) is a 16550A
+ttyS01 at 0x02f8 (irq = 3) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+SC1200: IDE controller at PCI slot 00:12.2
+SC1200: chipset revision 1
+SC1200: not 100% native mode: will probe irqs later
+    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
+    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
+hda: Transcend 256M, CFA DISK drive
+hdb: HTS424030M9AT00, ATA DISK drive
+SC1200: set xfer mode failure
+hdb: sc1200_set_xfer_mode(UDMA 2)
+blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff)
+ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
+hda: attached ide-disk driver.
+hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32
+hdb: attached ide-disk driver.
+hdb: host protected area => 1
+hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33)
+Partition check:
+ /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
+ /dev/ide/host0/bus0/target1/lun0: p1 p2 p3
+ /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
+blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB 
+blkmtd: version 1.10
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 1024 buckets, 8Kbytes
+TCP: Hash tables configured (established 8192 bind 16384)
+ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 80k freed
+jffs2.bbc: SIZE compression mode activated.
+natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
+  originally by Donald Becker <becker@scyld.com>
+  http://www.scyld.com/network/natsemi.html
+  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
+eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10.
+eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10.
+eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10.
+device eth0 entered promiscuous mode
+eth0: link up.
+eth0: Setting full-duplex based on negotiated link capability.
+eth0: Promiscuous mode enabled.
+eth0: Promiscuous mode enabled.
+eth0: Promiscuous mode enabled.
+eth0: Promiscuous mode enabled.
+eth0: Promiscuous mode enabled.
+br0: port 1(eth0) entering learning state
+br0: port 1(eth0) entering forwarding state
+br0: topology change detected, propagating
diff --git a/hardware/soekris/net4801/info.txt b/hardware/soekris/net4801/info.txt
new file mode 100644 (file)
index 0000000..94fbffb
--- /dev/null
@@ -0,0 +1,19 @@
+Soekris Engineering net4801
+
+Online Description from Linksys:
+http://www.soekris.com/net4801.htm
+
+CPU: Geode SC1100 by NSC @ 266 Mhz
+RAM: 128 MB
+1 National Semiconductor DP8381 Ethernet Controler - 3 10/100 Mbps ports
+1 CompactFLASH Type I/II socket
+1 UltraDMA-33 interface (44 pins) for 2.5" HDD
+1 Mini-PCI type III socket
+1 PCI Slot (3.3V)
+1 USB 1.1 port
+2 serial ports (external DB9 and internal 10 pins header)
+
+List of files:
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.30)
+pci.txt:  contents of /proc/pci (2.4.30)
+dmesg-2_4_30.txt: dmesg from Kernel 2.4.30
diff --git a/hardware/soekris/net4801/pci.txt b/hardware/soekris/net4801/pci.txt
new file mode 100644 (file)
index 0000000..7a53166
--- /dev/null
@@ -0,0 +1,40 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0600: PCI device 1078:0001 (rev 0).
+  Bus  0, device   6, function  0:
+    Class 0200: PCI device 100b:0020 (rev 0).
+      IRQ 10.
+      Master Capable.  Latency=63.  Min Gnt=11.Max Lat=52.
+      I/O at 0xe100 [0xe1ff].
+      Non-prefetchable 32 bit memory at 0xa0000000 [0xa0000fff].
+  Bus  0, device   7, function  0:
+    Class 0200: PCI device 100b:0020 (rev 0).
+      IRQ 10.
+      Master Capable.  Latency=63.  Min Gnt=11.Max Lat=52.
+      I/O at 0xe200 [0xe2ff].
+      Non-prefetchable 32 bit memory at 0xa0001000 [0xa0001fff].
+  Bus  0, device   8, function  0:
+    Class 0200: PCI device 100b:0020 (rev 0).
+      IRQ 10.
+      Master Capable.  Latency=63.  Min Gnt=11.Max Lat=52.
+      I/O at 0xe300 [0xe3ff].
+      Non-prefetchable 32 bit memory at 0xa0002000 [0xa0002fff].
+  Bus  0, device  18, function  0:
+    Class 0601: PCI device 100b:0510 (rev 0).
+      Master Capable.  Latency=63.  
+      I/O at 0x6100 [0x613f].
+      I/O at 0x6200 [0x623f].
+  Bus  0, device  18, function  1:
+    Class 0680: PCI device 100b:0511 (rev 0).
+      I/O at 0x6300 [0x63ff].
+  Bus  0, device  18, function  2:
+    Class 0101: PCI device 100b:0502 (rev 1).
+      I/O at 0xe000 [0xe00f].
+  Bus  0, device  18, function  5:
+    Class 0680: PCI device 100b:0515 (rev 0).
+      I/O at 0x6500 [0x653f].
+  Bus  0, device  19, function  0:
+    Class 0c03: PCI device 0e11:a0f8 (rev 8).
+      IRQ 11.
+      Master Capable.  Latency=56.  Max Lat=80.
+      Non-prefetchable 32 bit memory at 0xa0003000 [0xa0003fff].