ar71xx: add support for D-Link DIR-615 rev. Ix board
authorJohn Crispin <john@openwrt.org>
Tue, 7 Jul 2015 13:48:39 +0000 (13:48 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 7 Jul 2015 13:48:39 +0000 (13:48 +0000)
Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>
SVN-Revision: 46248

target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network [changed mode: 0644->0755]
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.18
target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/d-link.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch

index b73e26d..0bcb273 100644 (file)
@@ -61,6 +61,7 @@ get_status_led() {
        dir-505-a1 |\
        dir-600-a1 |\
        dir-615-e1 |\
+       dir-615-i1 |\
        dir-615-e4)
                status_led="d-link:green:power"
                ;;
index 89aefca..4bb8d40 100644 (file)
@@ -160,6 +160,14 @@ dir-825-b1)
        ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
        ;;
 
+dir-615-i1)
+       ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
+       ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
+       ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
+       ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
+       ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
+       ;;
+
 dir-825-c1)
        ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
old mode 100644 (file)
new mode 100755 (executable)
index 0eeae2b..ea19de9
@@ -215,6 +215,7 @@ tl-wr941nd)
 
 r6100 |\
 smart-300 |\
+dir-615-i1 |\
 tl-mr3420-v2 |\
 tl-wr841n-v8 |\
 tl-wr842n-v2 |\
index df93557..9943d69 100755 (executable)
@@ -411,6 +411,9 @@ ar71xx_board_detect() {
        *"DIR-615 rev. E4")
                name="dir-615-e4"
                ;;
+       *"DIR-615 rev. I1")
+               name="dir-615-i1"
+               ;;
        *"DIR-825 rev. B1")
                name="dir-825-b1"
                ;;
index b40dff5..c39169a 100644 (file)
@@ -29,6 +29,9 @@ preinit_set_mac_address() {
                        fetch_mac_from_mtd config lan_mac wan_mac
                        echo 1 > /sys/class/leds/dir-615-c1:green:wancpu/brightness
                        ;;
+               dir-615-i1)
+                       fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
+                       ;;
                r6100)
                        mac_lan=$(mtd_get_mac_binary caldata 0)
                        [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
index a4de468..37a2e7b 100755 (executable)
@@ -205,6 +205,7 @@ platform_check_image() {
        dir-615-c1 | \
        dir-615-e1 | \
        dir-615-e4 | \
+       dir-615-i1 | \
        dir-825-c1 | \
        dir-835-a1 | \
        dragino2 | \
index 3de7c53..0680dd0 100644 (file)
@@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y
 CONFIG_ATH79_MACH_DIR_600_A1=y
 CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_615_I1=y
 CONFIG_ATH79_MACH_DIR_825_B1=y
 CONFIG_ATH79_MACH_DIR_825_C1=y
 CONFIG_ATH79_MACH_DRAGINO2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
new file mode 100644 (file)
index 0000000..64fe438
--- /dev/null
@@ -0,0 +1,133 @@
+/*
+ *  D-Link DIR-615 rev. I1 board support
+ *  Copyright (C) 2013-2015 Jaehoon You <teslamint@gmail.com>
+ *
+ *  based on the DIR-600 rev. A1 board support code
+ *    Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *    Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ *  based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
+ *    Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DIR_615_I1_GPIO_LED_WPS                                15
+#define DIR_615_I1_GPIO_LED_POWER_AMBER                14
+#define DIR_615_I1_GPIO_LED_POWER_GREEN                4
+#define DIR_615_I1_GPIO_LED_WAN_AMBER          22
+#define DIR_615_I1_GPIO_LED_WAN_GREEN          12
+#define DIR_615_I1_GPIO_LED_WLAN_GREEN         13
+
+#define DIR_615_I1_GPIO_BTN_WPS                                16
+#define DIR_615_I1_GPIO_BTN_RESET                      17
+
+#define DIR_615_I1_KEYS_POLL_INTERVAL          20 /* msecs */
+#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL      (3 * DIR_615_I1_KEYS_POLL_INTERVAL)
+
+#define DIR_615_I1_LAN_PHYMASK BIT(0)
+#define DIR_615_I1_WAN_PHYMASK BIT(4)
+#define DIR_615_I1_WLAN_MAC_ADDR       0x1fffffb4
+
+static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
+       {
+               .name           = "d-link:green:power",
+               .gpio           = DIR_615_I1_GPIO_LED_POWER_GREEN,
+       }, {
+               .name           = "d-link:amber:power",
+               .gpio           = DIR_615_I1_GPIO_LED_POWER_AMBER,
+       }, {
+               .name           = "d-link:amber:wan",
+               .gpio           = DIR_615_I1_GPIO_LED_WAN_AMBER,
+       }, {
+               .name           = "d-link:green:wan",
+               .gpio           = DIR_615_I1_GPIO_LED_WAN_GREEN,
+               .active_low = 1,
+       }, {
+               .name           = "d-link:green:wlan",
+               .gpio           = DIR_615_I1_GPIO_LED_WLAN_GREEN,
+               .active_low = 1,
+       }, {
+               .name           = "d-link:blue:wps",
+               .gpio           = DIR_615_I1_GPIO_LED_WPS,
+               .active_low = 1,
+       }
+};
+
+static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DIR_615_I1_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DIR_615_I1_GPIO_BTN_WPS,
+               .active_low     = 1,
+       }
+};
+
+static void __init dir_615_i1_setup(void)
+{
+       u8 *eeprom  = (u8 *) KSEG1ADDR(0x1fff1000);
+       u8 mac[ETH_ALEN];
+
+       ath79_register_mdio(0, 0x0);
+       ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
+
+       ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+
+       /* GMAC0 is connected to the PHY0 of the internal switch */
+       ath79_switch_data.phy4_mii_en = 1;
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+       /* GMAC1 is connected to the internal switch */
+       ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+       ath79_register_eth(0);
+       ath79_register_eth(1);
+
+       ath79_register_m25p80(NULL);
+
+       /* Disable JTAG, enabling GPIOs 0-3 */
+       /* Configure OBS4 line, for GPIO 4*/
+       ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+                                AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
+                                       dir_615_i1_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(dir_615_i1_gpio_keys),
+                                       dir_615_i1_gpio_keys);
+
+       ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
+               dir_615_i1_setup);
index 0909df5..f782a41 100644 (file)
@@ -93,6 +93,16 @@ endef
 
 $(eval $(call Profile,DIR615E4))
 
+define Profile/DIR615IX
+       NAME:=D-Link DIR-615 rev. I1
+       PACKAGES:=
+endef
+
+define Profile/DIR615IX/Description
+       Package set optimized for the D-Link DIR-615 rev. I1.
+endef
+
+$(eval $(call Profile,DIR615IX))
 
 define Profile/DIR825B1
        NAME:=D-Link DIR-825 rev. B1
index 74e6840..0235287 100644 (file)
@@ -1177,6 +1177,7 @@ cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware)
 cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
 cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
 cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
+cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
 cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
 cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
 cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
@@ -1359,6 +1360,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
 Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
 Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
 
+Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
+Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
+Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
+
 Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
 Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
 Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
@@ -2027,6 +2032,9 @@ $(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,1
 $(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
 $(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
 
+$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
+$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
+
 $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
 $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
 $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
@@ -2147,6 +2155,7 @@ $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,tt
 $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
 
 $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
+$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
 $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
 $(eval $(call MultiProfile,AP143,AP143_8M AP143_16M))
 $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
index d6b6aab..3f22a37 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,192 @@
+@@ -16,22 +16,193 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -35,6 +35,7 @@
 +      ATH79_MACH_DIR_615_C1,          /* D-Link DIR-615 rev. C1 */
 +      ATH79_MACH_DIR_615_E1,          /* D-Link DIR-615 rev. E1 */
 +      ATH79_MACH_DIR_615_E4,          /* D-Link DIR-615 rev. E4 */
++      ATH79_MACH_DIR_615_I1,          /* D-Link DIR-615 rev. I1 */
 +      ATH79_MACH_DIR_825_B1,          /* D-Link DIR-825 rev. B1 */
 +      ATH79_MACH_DIR_825_C1,          /* D-Link DIR-825 rev. C1 */
 +      ATH79_MACH_DIR_835_A1,          /* D-Link DIR-835 rev. A1 */
  config ATH79_MACH_AP121
        bool "Atheros AP121 reference board"
        select SOC_AR933X
-@@ -11,62 +75,996 @@ config ATH79_MACH_AP121
+@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 +      select ATH79_DEV_WMAC
 +      select ATH79_NVRAM
 +
++config ATH79_MACH_DIR_615_I1
++      bool "D-Link DIR-615 rev. I1 support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
 +config ATH79_MACH_DIR_825_B1
 +      bool "D-Link DIR-825 rev. B1 board support"
 +      select SOC_AR71XX
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1081,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1092,97 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
  endmenu
  
  config SOC_AR71XX
-@@ -124,7 +1213,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1224,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1246,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1257,11 @@ config ATH79_PCI_ATH9K_FIXUP
        def_bool n
  
  config ATH79_ROUTERBOOT
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,121 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
+@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
  #
  # Machines
  #
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_615_C1)   += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_I1)   += mach-dir-615-i1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_825_B1)   += mach-dir-825-b1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_825_C1)   += mach-dir-825-c1.o
 +obj-$(CONFIG_ATH79_MACH_DRAGINO2)     += mach-dragino2.o