fix magicbox, convert mtd mapping to platform_device, add support for combined flash...
authorImre Kaloz <kaloz@openwrt.org>
Sat, 26 May 2007 15:36:22 +0000 (15:36 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Sat, 26 May 2007 15:36:22 +0000 (15:36 +0000)
SVN-Revision: 7336

target/linux/magicbox-2.6/Makefile
target/linux/magicbox-2.6/config/default
target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c
target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c [deleted file]
target/linux/magicbox-2.6/image/Makefile
target/linux/magicbox-2.6/patches/002-flash_map.patch [deleted file]

index 20325a8fa66169a505f72190217c9a51f23c1a91..9fe548a903bb185a14b5cde4f611dc53f5f2f425 100644 (file)
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=powerpc
 BOARD:=magicbox
 BOARDNAME:=Magicbox
-FEATURES:=jffs2
+FEATURES:=squashfs jffs2
 
 include $(INCLUDE_DIR)/kernel-build.mk
 
index dc33f83c058217c755f428783b2f18d78accba9d..cc53f5e56de52a47c618069645b4bbba4a1dc707 100644 (file)
@@ -28,7 +28,7 @@ CONFIG_BLK_DEV_MAGICBOX_IDE=y
 CONFIG_BOOT_LOAD=0x00400000
 # CONFIG_BT is not set
 # CONFIG_BUBINGA is not set
-CONFIG_CMDLINE="console=ttyS0,115200 init=/etc/preinit"
+CONFIG_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_CONSISTENT_START=0xff100000
@@ -103,7 +103,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAGICMAP=y
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -117,13 +116,17 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0xffc00000
 # CONFIG_MTD_PLATRAM is not set
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_SPLIT_ROOTFS=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_NET_VENDOR_3COM is not set
index 470fbc4e089fe850d46bdaeeb242e9900b03594d..e65319bc613cb766f384bf03e0b33ac649eed9c9 100644 (file)
@@ -24,6 +24,9 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/system.h>
 #include <asm/pci-bridge.h>
@@ -214,6 +217,50 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
 #endif /* DEBUG */
 }
 
+static struct resource magicbox_flash_resource = {
+       .start = 0xffc00000,
+       .end   = 0xffffffffULL,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition magicbox_flash_parts[] = {
+       {
+               .name = "linux",
+               .offset = 0x0,
+               .size = 0x3c0000,
+       },
+       {
+               .name = "rootfs",
+               .offset = 0x100000,
+               .size = 0x2c0000,
+       }
+};
+
+static struct physmap_flash_data magicbox_flash_data = {
+       .width          = 2,
+       .parts          = magicbox_flash_parts,
+       .nr_parts       = ARRAY_SIZE(magicbox_flash_parts),
+};
+
+static struct platform_device magicbox_flash_device = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev = {
+                       .platform_data = &magicbox_flash_data,
+               },
+       .num_resources  = 1,
+       .resource       = &magicbox_flash_resource,
+};
+
+static int magicbox_setup_flash(void)
+{
+       platform_device_register(&magicbox_flash_device);
+
+       return 0;
+};
+
+arch_initcall (magicbox_setup_flash);
+
 void __init
 magicbox_setup_arch(void)
 {
diff --git a/target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c b/target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c
deleted file mode 100644 (file)
index b654a3d..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * magicmap.c: Copyleft 2005  Karol Lewandowski
- *
- * Mapping for MagicBox flash.
- * Based on walnut.c.
- *
- * Heikki Lindholm <holindho@infradead.org>
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/autoconf.h>
-#include <asm/io.h>
-
-static struct mtd_info *flash;
-
-static struct map_info magic_map = {
-       .name =         "Magically mapped flash",
-       .phys =         0xffc00000,
-       .size =         0x400000,
-       .bankwidth =    2,
-};
-
-static struct mtd_partition magic_partitions[] = {
-       {
-               .name =   "linux",
-               .offset = 0x0,
-               .size =   0x3c0000,
-       },
-       {
-               .name =   "rootfs",
-               .offset = 0x100000,
-               .size =   0x2c0000,
-       },
-       {
-               .name =   "bootloader",
-               .offset = 0x3c0000,
-               .size =   0x040000,
-               .mask_flags = MTD_WRITEABLE,
-       },
-};
-
-int __init init_magic(void)
-{
-       u32 size, len;
-       
-       magic_map.virt =
-               (void __iomem *)ioremap(magic_map.phys, magic_map.size);
-
-       if (!magic_map.virt) {
-               printk("Failed to ioremap flash.\n");
-               return -EIO;
-       }
-
-       simple_map_init(&magic_map);
-
-       flash = do_map_probe("cfi_probe", &magic_map);
-       if (flash) {
-               flash->owner = THIS_MODULE;
-               if (flash->read(flash, 12, sizeof(u32), &len, (char *) &size) ||
-                       len != 4)
-                       return -ENXIO;
-               size += 0x40; /* header size of the uImage */
-               if (size < 0x400000) {
-                       /* skip to next erase block */
-                       if (size & (flash->erasesize - 1)) {
-                               size |= (flash->erasesize - 1);
-                               size += 1;
-                       }
-                       magic_partitions[1].offset = size;
-                       magic_partitions[1].size = magic_partitions[2].offset - size;
-               }
-               
-               add_mtd_partitions(flash, magic_partitions,
-                                       ARRAY_SIZE(magic_partitions));
-       } else {
-               printk("map probe failed for flash\n");
-               return -ENXIO;
-       }
-
-       return 0;
-}
-
-static void __exit cleanup_magic(void)
-{
-       if (flash) {
-               del_mtd_partitions(flash);
-               map_destroy(flash);
-       }
-
-       if (magic_map.virt) {
-               iounmap((void *)magic_map.virt);
-               magic_map.virt = NULL;
-       }
-}
-
-module_init(init_magic);
-module_exit(cleanup_magic);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karol Lewandowski");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 405EP MagicBox boards");
index fe68f35d5e9b69f350251f2170a8b089e8be0c2f..f99590f1ead4c0cbb6e72280e00298061626769b 100644 (file)
@@ -21,16 +21,17 @@ endef
 
 define Image/Build/jffs2-64k
        ( \
-               dd if=$(KDIR)/uImage bs=65536 conv=sync; \
+               dd if=$(KDIR)/uImage bs=1024k conv=sync; \
                dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \
        ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
 endef
 
-#define Image/Build/jffs2-128k
-#      ( \
-#              dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=131072 conv=sync; \
-#              dd if=$(KDIR)/root.$(1) bs=131072 conv=sync; \
-#      ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
-#endef
+define Image/Build/squashfs
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+       ( \
+               dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=1024k conv=sync; \
+               dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \
+       ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+endef
 
 $(eval $(call BuildImage))
diff --git a/target/linux/magicbox-2.6/patches/002-flash_map.patch b/target/linux/magicbox-2.6/patches/002-flash_map.patch
deleted file mode 100644 (file)
index 415daa5..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-diff -urN linux.old/drivers/mtd/maps/Kconfig linux.dev/drivers/mtd/maps/Kconfig
---- linux.old/drivers/mtd/maps/Kconfig 2006-08-30 06:30:59.000000000 +0200
-+++ linux.dev/drivers/mtd/maps/Kconfig 2006-08-30 06:11:51.000000000 +0200
-@@ -323,6 +323,15 @@
-         Walnut board. If you have one of these boards and would like to
-         use the flash chips on it, say 'Y'.
-+config MTD_MAGICMAP
-+      tristate "Flash device mapped on IBM 405EP MagicBox"
-+      depends on MTD_CFI && MTD_PARTITIONS && 40x && MAGICBOX
-+      help
-+        This enables access routines for the flash chips on the IBM 405EP
-+        MagicBox board. If you have one of these boards and would like to
-+        use the flash chips on it, say 'Y'.
-+
-+
- config MTD_EBONY
-       tristate "Flash devices mapped on IBM 440GP Ebony"
-       depends on MTD_JEDECPROBE && EBONY
-diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
---- linux.old/drivers/mtd/maps/Makefile        2006-08-30 06:30:59.000000000 +0200
-+++ linux.dev/drivers/mtd/maps/Makefile        2006-08-30 06:11:51.000000000 +0200
-@@ -58,6 +58,7 @@
- obj-$(CONFIG_MTD_BEECH)               += beech-mtd.o
- obj-$(CONFIG_MTD_ARCTIC)      += arctic-mtd.o
- obj-$(CONFIG_MTD_WALNUT)        += walnut.o
-+obj-$(CONFIG_MTD_MAGICMAP)      += magicmap.o
- obj-$(CONFIG_MTD_H720X)               += h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240)     += sbc8240.o
- obj-$(CONFIG_MTD_NOR_TOTO)    += omap-toto-flash.o