tl-wr1043nd: Register missing leds.

This adds the folowing for the TP-Link wr1043nd board
1. USB and WLAN LEDS
2. Change QSS LED from red to green
3. Fix polarity of the System LED

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>
SVN-Revision: 18821

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
index 034427d1bc232ecc95ee5d74e3c753c8c20ba53d..f77d259692ed15cbd3e11751dc5968bf2204b433 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -21,8 +21,10 @@
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
 
+#define TL_WR1043ND_GPIO_LED_USB        1
 #define TL_WR1043ND_GPIO_LED_SYSTEM     2
 #define TL_WR1043ND_GPIO_LED_QSS        5
+#define TL_WR1043ND_GPIO_LED_WLAN       9
 
 #define TL_WR1043ND_GPIO_BTN_RESET      3
 #define TL_WR1043ND_GPIO_BTN_QSS        7
@@ -66,13 +68,21 @@ static struct flash_platform_data tl_wr1043nd_flash_data = {
 
 static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
        {
+               .name           = "tl-wr1043nd:green:usb",
+               .gpio           = TL_WR1043ND_GPIO_LED_USB,
+               .active_low     = 0,
+       }, {
                .name           = "tl-wr1043nd:green:system",
                .gpio           = TL_WR1043ND_GPIO_LED_SYSTEM,
-               .active_low     = 1,
+               .active_low     = 0,
        }, {
-               .name           = "tl-wr1043nd:red:qss",
+               .name           = "tl-wr1043nd:green:qss",
                .gpio           = TL_WR1043ND_GPIO_LED_QSS,
                .active_low     = 1,
+       }, {
+               .name           = "tl-wr1043nd:green:wlan",
+               .gpio           = TL_WR1043ND_GPIO_LED_WLAN,
+               .active_low     = 0,
        }
 };