kirkwood: add 3.18 support
authorLuka Perkov <luka@openwrt.org>
Thu, 11 Dec 2014 01:20:41 +0000 (01:20 +0000)
committerLuka Perkov <luka@openwrt.org>
Thu, 11 Dec 2014 01:20:41 +0000 (01:20 +0000)
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613

target/linux/kirkwood/config-3.18 [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/110-ib62x0.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/130-iconnect.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/140-dockstar.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/160-ea4500.patch [new file with mode: 0644]
target/linux/kirkwood/patches-3.18/170-ea3500.patch [new file with mode: 0644]

diff --git a/target/linux/kirkwood/config-3.18 b/target/linux/kirkwood/config-3.18
new file mode 100644 (file)
index 0000000..b820597
--- /dev/null
@@ -0,0 +1,325 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MVEBU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_HAS_SG_CHAIN=y
+# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART=y
+# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xf1012000
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_VIRT=0xfed12000
+CONFIG_DEBUG_UNCOMPRESS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DLCI is not set
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_EXT4_FS=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_INET_LRO=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_INTEL_SOC_PMIC is not set
+CONFIG_IOMMU_HELPER=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KERNFS=y
+CONFIG_KIRKWOOD_CLK=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_NETXBIG=y
+CONFIG_LEDS_NS2=y
+# CONFIG_LEDS_REGULATOR is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIBFDT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_MVEBU_ANY=y
+# CONFIG_MACH_NETXBIG is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MV643XX_ETH=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+# CONFIG_MVNETA is not set
+CONFIG_MVSW6171_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_IRQCHIP=y
+CONFIG_ORION_TIMER=y
+CONFIG_OUTER_CACHE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_KIRKWOOD=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PLAT_ORION=y
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_BRCMSTB is not set
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_QNAP is not set
+# CONFIG_POWER_RESET_SYSCON is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_RFKILL_REGULATOR is not set
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SOC_BUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+# CONFIG_UBIFS_FS_XZ is not set
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/patches-3.18/110-ib62x0.patch b/target/linux/kirkwood/patches-3.18/110-ib62x0.patch
new file mode 100644 (file)
index 0000000..153c41b
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -117,13 +117,13 @@
+       };
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x600000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@700000 {
++      partition@200000 {
+               label = "root";
+-              reg = <0x0700000 0xf900000>;
++              reg = <0x200000 0xfe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch b/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch
new file mode 100644 (file)
index 0000000..33f7004
--- /dev/null
@@ -0,0 +1,13 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -192,8 +192,8 @@
+       };
+       partition@400000 {
+-              label = "uInitrd";
+-              reg = <0x540000 0x1000000>;
++              label = "rootfs";
++              reg = <0x400000 0x1C00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-3.18/130-iconnect.patch b/target/linux/kirkwood/patches-3.18/130-iconnect.patch
new file mode 100644 (file)
index 0000000..c95579d
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -155,28 +155,23 @@
+       status = "okay";
+       partition@0 {
+-              label = "uboot";
+-              reg = <0x0000000 0xc0000>;
++              label = "u-boot";
++              reg = <0x0000000 0xe0000>;
+       };
+-      partition@a0000 {
+-              label = "env";
+-              reg = <0xa0000 0x20000>;
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+       partition@100000 {
+-              label = "zImage";
+-              reg = <0x100000 0x300000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@540000 {
+-              label = "initrd";
+-              reg = <0x540000 0x300000>;
+-      };
+-
+-      partition@980000 {
+-              label = "boot";
+-              reg = <0x980000 0x1f400000>;
++      partition@200000 {
++              label = "root";
++              reg = <0x200000 0x1fe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-3.18/140-dockstar.patch b/target/linux/kirkwood/patches-3.18/140-dockstar.patch
new file mode 100644 (file)
index 0000000..b1ad669
--- /dev/null
@@ -0,0 +1,32 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -77,18 +77,22 @@
+       partition@0 {
+               label = "u-boot";
+-              reg = <0x0000000 0x100000>;
+-              read-only;
++              reg = <0x0000000 0xe0000>;
++      };
++
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@500000 {
+-              label = "data";
+-              reg = <0x0500000 0xfb00000>;
++      partition@200000 {
++              label = "root";
++              reg = <0x200000 0xfe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch
new file mode 100644 (file)
index 0000000..561c07f
--- /dev/null
@@ -0,0 +1,127 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -147,6 +147,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+       kirkwood-openrd-base.dtb \
+       kirkwood-openrd-client.dtb \
+       kirkwood-openrd-ultimate.dtb \
++      kirkwood-pogo_e02.dtb \
+       kirkwood-rd88f6192.dtb \
+       kirkwood-rd88f6281-z0.dtb \
+       kirkwood-rd88f6281-a.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -0,0 +1,114 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++      model = "Cloud Engines Pogoplug E02";
++      compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++      memory {
++              device_type = "memory";
++              reg = <0x00000000 0x10000000>;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200n8 earlyprintk";
++      };
++
++      ocp@f1000000 {
++              pinctrl: pin-controller@10000 {
++                      pmx_usb_power_enable: pmx-usb-power-enable {
++                              marvell,pins = "mpp29";
++                              marvell,function = "gpio";
++                      };
++                      pmx_led_green: pmx-led_green {
++                              marvell,pins = "mpp48";
++                              marvell,function = "gpio";
++                      };
++                      pmx_led_orange: pmx-led_orange {
++                              marvell,pins = "mpp49";
++                              marvell,function = "gpio";
++                      };
++              };
++              serial@12000 {
++                      status = "ok";
++              };
++      };
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
++                            &pmx_led_green >;
++              pinctrl-names = "default";
++
++              health {
++                      label = "status:green:health";
++                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++                      default-state = "keep";
++              };
++              fault {
++                      label = "status:orange:fault";
++                      gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
++              };
++      };
++      regulators {
++              compatible = "simple-bus";
++              #address-cells = <1>;
++              #size-cells = <0>;
++              pinctrl-0 = <&pmx_usb_power_enable>;
++              pinctrl-names = "default";
++
++              usb_power: regulator@1 {
++                      compatible = "regulator-fixed";
++                      reg = <1>;
++                      regulator-name = "USB Power";
++                      regulator-min-microvolt = <5000000>;
++                      regulator-max-microvolt = <5000000>;
++                      enable-active-high;
++                      regulator-always-on;
++                      regulator-boot-on;
++                      gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
++
++&nand {
++      chip-delay = <40>;
++      status = "okay";
++
++      partition@0 {
++              label = "u-boot";
++              reg = <0x0000000 0x100000>;
++              read-only;
++      };
++
++      partition@100000 {
++              label = "uImage";
++              reg = <0x0100000 0x400000>;
++      };
++
++      partition@500000 {
++              label = "pogoplug";
++              reg = <0x0500000 0x2000000>;
++      };
++
++      partition@2500000 {
++              label = "root";
++              reg = <0x02500000 0x5b00000>;
++      };
++};
++
++&mdio {
++      status = "okay";
++
++      ethphy0: ethernet-phy@0 {
++              reg = <0>;
++      };
++};
++
++&eth0 {
++      status = "okay";
++      ethernet0-port@0 {
++              phy-handle = <&ethphy0>;
++      };
++};
diff --git a/target/linux/kirkwood/patches-3.18/160-ea4500.patch b/target/linux/kirkwood/patches-3.18/160-ea4500.patch
new file mode 100644 (file)
index 0000000..bf33756
--- /dev/null
@@ -0,0 +1,169 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+       kirkwood-ds411.dtb \
+       kirkwood-ds411j.dtb \
+       kirkwood-ds411slim.dtb \
++      kirkwood-ea4500.dtb \
+       kirkwood-goflexnet.dtb \
+       kirkwood-guruplug-server-plus.dtb \
+       kirkwood-ib62x0.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-ea4500.dts
+@@ -0,0 +1,156 @@
++/*
++ * kirkwood-ea4500.dts - Device Tree file for Linksys EA4500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++      model = "Linksys EA4500";
++      compatible = "linksys,ea4500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++      memory {
++              device_type = "memory";
++              reg = <0x00000000 0x8000000>;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200n8 earlyprintk";
++      };
++
++      mbus {
++              pcie-controller {
++                      status = "okay";
++
++                      pcie@1,0 {
++                              status = "okay";
++                      };
++
++                      pcie@2,0 {
++                              status = "okay";
++                      };
++              };
++      };
++
++      ocp@f1000000 {
++              pinctrl: pin-controller@10000 {
++                      pmx_led_white_health: pmx-led-white-health {
++                              marvell,pins = "mpp7";
++                              marvell,function = "gpo";
++                      };
++                      pmx_led_white_pulse: pmx-led-white-pulse {
++                              marvell,pins = "mpp14";
++                              marvell,function = "gpio";
++                      };
++                      pmx_btn_wps: pmx-btn-wps {
++                              marvell,pins = "mpp47";
++                              marvell,function = "gpio";
++                      };
++                      pmx_btn_reset: pmx-btn-reset {
++                              marvell,pins = "mpp48";
++                              marvell,function = "gpio";
++                      };
++              };
++
++              rtc@10300 {
++                      status = "disabled";
++              };
++
++              serial@12000 {
++                      status = "okay";
++              };
++
++      };
++
++      gpio_keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++              pinctrl-names = "default";
++
++              button@15 {
++                      label = "WPS Button";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++              };
++
++              button@16 {
++                      label = "Reset Button";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
++              pinctrl-names = "default";
++
++              white-health {
++                      label = "ea4500:white:health";
++                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++              };
++
++              white-pulse {
++                      label = "ea4500:white:pulse";
++                      gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
++
++&nand {
++      status = "okay";
++      pinctrl-0 = <&pmx_nand>;
++      pinctrl-names = "default";
++
++      partition@0 {
++              label = "u-boot";
++              reg = <0x0000000 0x80000>;
++      };
++
++      partition@80000 {
++              label = "u-boot environment";
++              reg = <0x80000 0x20000>;
++      };
++
++      partition@200000 {
++              label = "kernel";
++              reg = <0x200000 0x200000>;
++      };
++
++      partition@400000 {
++              label = "root";
++              reg = <0x400000 0x1c00000>;
++      };
++};
++
++&mdio {
++      status = "okay";
++};
++
++&eth0 {
++      status = "okay";
++      ethernet0-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};
++
++&eth1 {
++      status = "okay";
++      ethernet1-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};
diff --git a/target/linux/kirkwood/patches-3.18/170-ea3500.patch b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
new file mode 100644 (file)
index 0000000..95007fa
--- /dev/null
@@ -0,0 +1,162 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+       kirkwood-ds411.dtb \
+       kirkwood-ds411j.dtb \
+       kirkwood-ds411slim.dtb \
++      kirkwood-ea3500.dtb \
+       kirkwood-ea4500.dtb \
+       kirkwood-goflexnet.dtb \
+       kirkwood-guruplug-server-plus.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
+@@ -0,0 +1,149 @@
++/*
++ * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ * (c) 2014 Dan Walters <dan@walters.io>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++      model = "Linksys EA3500";
++      compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++      memory {
++              device_type = "memory";
++              reg = <0x00000000 0x4000000>;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200n8 earlyprintk";
++      };
++
++      mbus {
++              pcie-controller {
++                      status = "okay";
++
++                      pcie@1,0 {
++                              status = "okay";
++                      };
++
++                      pcie@2,0 {
++                              status = "okay";
++                      };
++              };
++      };
++
++      ocp@f1000000 {
++              pinctrl: pin-controller@10000 {
++                      pmx_led_green_power: pmx-led-green-power {
++                              marvell,pins = "mpp7";
++                              marvell,function = "gpo";
++                      };
++                      pmx_btn_wps: pmx-btn-wps {
++                              marvell,pins = "mpp47";
++                              marvell,function = "gpio";
++                      };
++                      pmx_btn_reset: pmx-btn-reset {
++                              marvell,pins = "mpp48";
++                              marvell,function = "gpio";
++                      };
++              };
++
++              rtc@10300 {
++                      status = "disabled";
++              };
++
++              serial@12000 {
++                      status = "okay";
++              };
++
++      };
++
++      gpio_keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++              pinctrl-names = "default";
++
++              button@15 {
++                      label = "WPS Button";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++              };
++
++              button@16 {
++                      label = "Reset Button";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-0 = < &pmx_led_green_power >;
++              pinctrl-names = "default";
++
++              green-power {
++                      label = "ea3500:green:power";
++                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
++
++&nand {
++      status = "okay";
++      pinctrl-0 = <&pmx_nand>;
++      pinctrl-names = "default";
++
++      partition@0 {
++              label = "u-boot";
++              reg = <0x0000000 0x80000>;
++              read-only;
++      };
++
++      partition@80000 {
++              label = "u-boot environment";
++              reg = <0x80000 0x20000>;
++      };
++
++      partition@200000 {
++              label = "kernel";
++              reg = <0x200000 0x200000>;
++      };
++
++      partition@400000 {
++              label = "root";
++              reg = <0x400000 0x1200000>;
++      };
++};
++
++&mdio {
++      status = "okay";
++};
++
++&eth0 {
++      status = "okay";
++      ethernet0-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};
++
++&eth1 {
++      status = "okay";
++      ethernet1-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};