--- /dev/null
+--- a/raddb/attrs
++++ b/raddb/attrs
+@@ -1,7 +1,4 @@
+ #
+-# Configuration file for the rlm_attr_filter module.
+-# Please see rlm_attr_filter(5) manpage for more information.
+-#
+ # $Id$
+ #
+ # This file contains security and configuration information
+--- a/raddb/attrs.access_reject
++++ b/raddb/attrs.access_reject
+@@ -1,7 +1,4 @@
+ #
+-# Configuration file for the rlm_attr_filter module.
+-# Please see rlm_attr_filter(5) manpage for more information.
+-#
+ # $Id$
+ #
+ # This configuration file is used to remove almost all of the attributes
+--- a/raddb/attrs.accounting_response
++++ b/raddb/attrs.accounting_response
+@@ -1,7 +1,4 @@
+ #
+-# Configuration file for the rlm_attr_filter module.
+-# Please see rlm_attr_filter(5) manpage for more information.
+-#
+ # $Id$
+ #
+ # This configuration file is used to remove almost all of the attributes
+--- a/raddb/attrs.pre-proxy
++++ b/raddb/attrs.pre-proxy
+@@ -1,7 +1,4 @@
+ #
+-# Configuration file for the rlm_attr_filter module.
+-# Please see rlm_attr_filter(5) manpage for more information.
+-#
+ # $Id$
+ #
+ # This file contains security and configuration information
+--- a/raddb/dictionary.in
++++ b/raddb/dictionary.in
+@@ -11,14 +11,12 @@
+ #
+ # The filename given here should be an absolute path.
+ #
+-$INCLUDE @prefix@/share/freeradius/dictionary
++$INCLUDE @prefix@/share/freeradius2/dictionary
+
+ #
+ # Place additional attributes or $INCLUDEs here. They will
+ # over-ride the definitions in the pre-defined dictionaries.
+ #
+-# See the 'man' page for 'dictionary' for information on
+-# the format of the dictionary files.
+
+ #
+ # If you want to add entries to the dictionary file,
+--- a/raddb/eap.conf
++++ b/raddb/eap.conf
+@@ -27,7 +27,7 @@
+ # then that EAP type takes precedence over the
+ # default type configured here.
+ #
+- default_eap_type = md5
++ default_eap_type = peap
+
+ # A list is maintained to correlate EAP-Response
+ # packets with EAP-Request packets. After a
+@@ -72,23 +72,8 @@
+ # for wireless connections. It is insecure, and does
+ # not provide for dynamic WEP keys.
+ #
+- md5 {
+- }
+-
+- # Cisco LEAP
+- #
+- # We do not recommend using LEAP in new deployments. See:
+- # http://www.securiteam.com/tools/5TP012ACKE.html
+- #
+- # Cisco LEAP uses the MS-CHAP algorithm (but not
+- # the MS-CHAP attributes) to perform it's authentication.
+- #
+- # As a result, LEAP *requires* access to the plain-text
+- # User-Password, or the NT-Password attributes.
+- # 'System' authentication is impossible with LEAP.
+- #
+- leap {
+- }
++# md5 {
++# }
+
+ # Generic Token Card.
+ #
+@@ -101,10 +86,10 @@
+ # the users password will go over the wire in plain-text,
+ # for anyone to see.
+ #
+- gtc {
++# gtc {
+ # The default challenge, which many clients
+ # ignore..
+- #challenge = "Password: "
++# challenge = "Password: "
+
+ # The plain-text response which comes back
+ # is put into a User-Password attribute,
+@@ -118,8 +103,8 @@
+ # configured for the request, and do the
+ # authentication itself.
+ #
+- auth_type = PAP
+- }
++# auth_type = PAP
++# }
+
+ ## EAP-TLS
+ #
+@@ -130,11 +115,6 @@
+ # built, the "tls", "ttls", and "peap" sections will
+ # be ignored.
+ #
+- # Otherwise, when the server first starts in debugging
+- # mode, test certificates will be created. See the
+- # "make_cert_command" below for details, and the README
+- # file in raddb/certs
+- #
+ # These test certificates SHOULD NOT be used in a normal
+ # deployment. They are created only to make it easier
+ # to install the server, and to perform some simple
+@@ -201,7 +181,7 @@
+ # In these cases, fragment size should be
+ # 1024 or less.
+ #
+- # fragment_size = 1024
++ fragment_size = 1024
+
+ # include_length is a flag which is
+ # by default set to yes If set to
+@@ -211,7 +191,7 @@
+ # message is included ONLY in the
+ # First packet of a fragment series.
+ #
+- # include_length = yes
++ include_length = yes
+
+ # Check the Certificate Revocation List
+ #
+@@ -220,83 +200,74 @@
+ # 'c_rehash' is OpenSSL's command.
+ # 3) uncomment the line below.
+ # 5) Restart radiusd
+- # check_crl = yes
+- # CA_path = /path/to/directory/with/ca_certs/and/crls/
++# check_crl = yes
++# CA_path = /path/to/directory/with/ca_certs/and/crls/
++
++ #
++ # If check_cert_issuer is set, the value will
++ # be checked against the DN of the issuer in
++ # the client certificate. If the values do not
++ # match, the cerficate verification will fail,
++ # rejecting the user.
++ #
++# check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd"
++
++ #
++ # If check_cert_cn is set, the value will
++ # be xlat'ed and checked against the CN
++ # in the client certificate. If the values
++ # do not match, the certificate verification
++ # will fail rejecting the user.
++ #
++ # This check is done only if the previous
++ # "check_cert_issuer" is not set, or if
++ # the check succeeds.
++ #
++# check_cert_cn = %{User-Name}
+
+- #
+- # If check_cert_issuer is set, the value will
+- # be checked against the DN of the issuer in
+- # the client certificate. If the values do not
+- # match, the cerficate verification will fail,
+- # rejecting the user.
+- #
+- # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd"
+-
+- #
+- # If check_cert_cn is set, the value will
+- # be xlat'ed and checked against the CN
+- # in the client certificate. If the values
+- # do not match, the certificate verification
+- # will fail rejecting the user.
+- #
+- # This check is done only if the previous
+- # "check_cert_issuer" is not set, or if
+- # the check succeeds.
+- #
+- # check_cert_cn = %{User-Name}
+- #
+ # Set this option to specify the allowed
+ # TLS cipher suites. The format is listed
+ # in "man 1 ciphers".
+ cipher_list = "DEFAULT"
+
+ #
+-
+- # This configuration entry should be deleted
+- # once the server is running in a normal
+- # configuration. It is here ONLY to make
+- # initial deployments easier.
+- #
+- make_cert_command = "${certdir}/bootstrap"
+-
+- #
+ # Session resumption / fast reauthentication
+ # cache.
+ #
+- cache {
+- #
+- # Enable it. The default is "no".
+- # Deleting the entire "cache" subsection
+- # Also disables caching.
+- #
+- # You can disallow resumption for a
+- # particular user by adding the following
+- # attribute to the control item list:
+- #
+- # Allow-Session-Resumption = No
+- #
+- # If "enable = no" below, you CANNOT
+- # enable resumption for just one user
+- # by setting the above attribute to "yes".
+- #
+- enable = no
+-
+- #
+- # Lifetime of the cached entries, in hours.
+- # The sessions will be deleted after this
+- # time.
+- #
+- lifetime = 24 # hours
+-
+- #
+- # The maximum number of entries in the
+- # cache. Set to "0" for "infinite".
+- #
+- # This could be set to the number of users
+- # who are logged in... which can be a LOT.
+- #
+- max_entries = 255
+- }
++# cache {
++ #
++ # Enable it. The default is "no".
++ # Deleting the entire "cache" subsection
++ # Also disables caching.
++ #
++ # You can disallow resumption for a
++ # particular user by adding the following
++ # attribute to the control item list:
++ #
++ # Allow-Session-Resumption = No
++ #
++ # If "enable = no" below, you CANNOT
++ # enable resumption for just one user
++ # by setting the above attribute to "yes".
++ #
++# enable = no
++
++ #
++ # Lifetime of the cached entries, in hours.
++ # The sessions will be deleted after this
++ # time.
++ #
++# lifetime = 24 # hours
++
++ #
++ # The maximum number of entries in the
++ # cache. Set to "0" for "infinite".
++ #
++ # This could be set to the number of users
++ # who are logged in... which can be a LOT.
++ #
++# max_entries = 255
++# }
+ }
+
+ # The TTLS module implements the EAP-TTLS protocol,
+@@ -320,7 +291,7 @@
+ #
+ # in the control items for a request.
+ #
+- ttls {
++# ttls {
+ # The tunneled EAP session needs a default
+ # EAP type which is separate from the one for
+ # the non-tunneled EAP module. Inside of the
+@@ -328,7 +299,7 @@
+ # If the request does not contain an EAP
+ # conversation, then this configuration entry
+ # is ignored.
+- default_eap_type = md5
++# default_eap_type = mschapv2
+
+ # The tunneled authentication request does
+ # not usually contain useful attributes
+@@ -344,7 +315,7 @@
+ # is copied to the tunneled request.
+ #
+ # allowed values: {no, yes}
+- copy_request_to_tunnel = no
++# copy_request_to_tunnel = yes
+
+ # The reply attributes sent to the NAS are
+ # usually based on the name of the user
+@@ -357,7 +328,7 @@
+ # the tunneled request.
+ #
+ # allowed values: {no, yes}
+- use_tunneled_reply = no
++# use_tunneled_reply = no
+
+ #
+ # The inner tunneled request can be sent
+@@ -369,13 +340,13 @@
+ # the virtual server that processed the
+ # outer requests.
+ #
+- virtual_server = "inner-tunnel"
++# virtual_server = "inner-tunnel"
+
+ # This has the same meaning as the
+ # same field in the "tls" module, above.
+ # The default value here is "yes".
+ # include_length = yes
+- }
++# }
+
+ ##################################################
+ #
+@@ -438,26 +409,16 @@
+
+ # the PEAP module also has these configuration
+ # items, which are the same as for TTLS.
+- copy_request_to_tunnel = no
+- use_tunneled_reply = no
++ copy_request_to_tunnel = yes
++ use_tunneled_reply = yes
+
+ # When the tunneled session is proxied, the
+ # home server may not understand EAP-MSCHAP-V2.
+ # Set this entry to "no" to proxy the tunneled
+ # EAP-MSCHAP-V2 as normal MSCHAPv2.
+- # proxy_tunneled_request_as_eap = yes
++ proxy_tunneled_request_as_eap = no
+
+- #
+- # The inner tunneled request can be sent
+- # through a virtual server constructed
+- # specifically for this purpose.
+- #
+- # If this entry is commented out, the inner
+- # tunneled request will be sent through
+- # the virtual server that processed the
+- # outer requests.
+- #
+- virtual_server = "inner-tunnel"
++ EAP-TLS-Require-Client-Cert = no
+ }
+
+ #
+--- a/raddb/ldap.attrmap
++++ b/raddb/ldap.attrmap
+@@ -13,8 +13,7 @@
+ # If not present, defaults to "==" for checkItems,
+ # and "=" for replyItems.
+ # If present, the operator here should be one
+-# of the same operators as defined in the "users"3
+-# file ("man users", or "man 5 users").
++# of the same operators as defined in the "users" file.
+ # If an operator is present in the value of the
+ # LDAP entry (i.e. ":=foo"), then it over-rides
+ # both the default, and any operator given here.
+--- a/raddb/modules/counter
++++ b/raddb/modules/counter
+@@ -69,7 +69,7 @@
+ # 'check-name' attribute.
+ #
+ counter daily {
+- filename = ${db_dir}/db.daily
++ filename = ${radacctdir}/db.daily
+ key = User-Name
+ count-attribute = Acct-Session-Time
+ reset = daily
+--- a/raddb/modules/detail
++++ b/raddb/modules/detail
+@@ -46,8 +46,7 @@ detail {
+
+ #
+ # Every entry in the detail file has a header which
+- # is a timestamp. By default, we use the ctime
+- # format (see "man ctime" for details).
++ # is a timestamp. By default, we use the ctime format.
+ #
+ # The header can be customized by editing this
+ # string. See "doc/variables.txt" for a description
+--- a/raddb/modules/exec
++++ b/raddb/modules/exec
+@@ -15,9 +15,8 @@
+ # of the program which is executed. Due to RADIUS protocol
+ # limitations, any output over 253 bytes will be ignored.
+ #
+-# The RADIUS attributes from the user request will be placed
+-# into environment variables of the executed program, as
+-# described in "man unlang" and in doc/variables.txt
++# The RADIUS attributes from the user request will be placed into environment
++# variables of the executed program, as described in doc/variables.txt
+ #
+ # See also "echo" for more sample configuration.
+ #
+--- a/raddb/modules/pap
++++ b/raddb/modules/pap
+@@ -4,8 +4,7 @@
+
+ # PAP module to authenticate users based on their stored password
+ #
+-# Supports multiple encryption/hash schemes. See "man rlm_pap"
+-# for details.
++# Supports multiple encryption/hash schemes.
+ #
+ # The "auto_header" configuration item can be set to "yes".
+ # In this case, the module will look inside of the User-Password
+@@ -14,5 +13,5 @@
+ # with the correct value. It will also automatically handle
+ # Base-64 encoded data, hex strings, and binary data.
+ pap {
+- auto_header = no
++ auto_header = yes
+ }
+--- a/raddb/modules/radutmp
++++ b/raddb/modules/radutmp
+@@ -12,7 +12,7 @@ radutmp {
+ # Where the file is stored. It's not a log file,
+ # so it doesn't need rotating.
+ #
+- filename = ${logdir}/radutmp
++ filename = ${radacctdir}/radutmp
+
+ # The field in the packet to key on for the
+ # 'user' name, If you have other fields which you want
+--- a/raddb/modules/sradutmp
++++ b/raddb/modules/sradutmp
+@@ -10,7 +10,7 @@
+ # then name "sradutmp" to identify it later in the "accounting"
+ # section.
+ radutmp sradutmp {
+- filename = ${logdir}/sradutmp
++ filename = ${radacctdir}/sradutmp
+ perm = 0644
+ callerid = "no"
+ }
+--- a/raddb/preproxy_users
++++ b/raddb/preproxy_users
+@@ -1,6 +1,5 @@
+ #
+ # Configuration file for the rlm_files module.
+-# Please see rlm_files(5) manpage for more information.
+ #
+ # $Id$
+ #
+--- a/raddb/proxy.conf
++++ b/raddb/proxy.conf
+@@ -559,9 +559,8 @@ home_server_pool my_auth_failover {
+ # This section defines a new-style "realm". Note the in version 2.0,
+ # there are many fewer configuration items than in 1.x for a realm.
+ #
+-# Automatic proxying is done via the "realms" module (see "man
+-# rlm_realm"). To manually proxy the request put this entry in the
+-# "users" file:
++# Automatic proxying is done via the "realms" module.
++# To manually proxy the request put this entry in the "users" file:
+
+ #
+ #
+--- a/raddb/radiusd.conf.in
++++ b/raddb/radiusd.conf.in
+@@ -8,11 +8,6 @@
+
+ ######################################################################
+ #
+-# Read "man radiusd" before editing this file. See the section
+-# titled DEBUGGING. It outlines a method where you can quickly
+-# obtain the configuration you want, without running into
+-# trouble.
+-#
+ # Run the server in debugging mode, and READ the output.
+ #
+ # $ radiusd -X
+@@ -41,14 +36,8 @@
+ # file, it is exported through the API to modules that ask for
+ # it.
+ #
+-# See "man radiusd.conf" for documentation on the format of this
+-# file. Note that the individual configuration items are NOT
+-# documented in that "man" page. They are only documented here,
+-# in the comments.
+-#
+ # As of 2.0.0, FreeRADIUS supports a simple processing language
+ # in the "authorize", "authenticate", "accounting", etc. sections.
+-# See "man unlang" for details.
+ #
+
+ prefix = @prefix@
+@@ -66,7 +55,7 @@ name = radiusd
+
+ # Location of config and logfiles.
+ confdir = ${raddbdir}
+-run_dir = ${localstatedir}/run/${name}
++run_dir = ${localstatedir}/run
+
+ # Should likely be ${localstatedir}/lib/radiusd
+ db_dir = ${raddbdir}
+@@ -112,7 +101,7 @@ libdir = @libdir@
+ #
+ # This file is written when ONLY running in daemon mode.
+ #
+-# e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid`
++# e.g.: kill -HUP `cat /var/run/radiusd.pid`
+ #
+ pidfile = ${run_dir}/${name}.pid
+
+@@ -290,7 +279,7 @@ listen {
+ # If your system does not support this feature, you will
+ # get an error if you try to use it.
+ #
+-# interface = eth0
++ interface = br-lan
+
+ # Per-socket lists of clients. This is a very useful feature.
+ #
+@@ -317,7 +306,7 @@ listen {
+ # ipv6addr = ::
+ port = 0
+ type = acct
+-# interface = eth0
++ interface = br-lan
+ # clients = per_socket_clients
+ }
+
+@@ -464,9 +453,6 @@ log {
+ # msg_badpass = ""
+ }
+
+-# The program to execute to do concurrency checks.
+-checkrad = ${sbindir}/checkrad
+-
+ # SECURITY CONFIGURATION
+ #
+ # There may be multiple methods of attacking on the server. This
+@@ -541,8 +527,8 @@ security {
+ #
+ # allowed values: {no, yes}
+ #
+-proxy_requests = yes
+-$INCLUDE proxy.conf
++proxy_requests = no
++#$INCLUDE proxy.conf
+
+
+ # CLIENTS CONFIGURATION
+@@ -694,10 +680,6 @@ modules {
+ #
+ # $INCLUDE sql/mysql/counter.conf
+
+- #
+- # IP addresses managed in an SQL table.
+- #
+-# $INCLUDE sqlippool.conf
+ }
+
+ # Instantiation
+@@ -722,7 +704,7 @@ instantiate {
+ # The entire command line (and output) must fit into 253 bytes.
+ #
+ # e.g. Framed-Pool = `%{exec:/bin/echo foo}`
+- exec
++# exec
+
+ #
+ # The expression module doesn't do authorization,
+@@ -735,15 +717,15 @@ instantiate {
+ # listed in any other section. See 'doc/rlm_expr' for
+ # more information.
+ #
+- expr
++# expr
+
+ #
+ # We add the counter module here so that it registers
+ # the check-name attribute before any module which sets
+ # it
+ # daily
+- expiration
+- logintime
++# expiration
++# logintime
+
+ # subsections here can be thought of as "virtual" modules.
+ #
+@@ -767,7 +749,7 @@ instantiate {
+ # to multiple times.
+ #
+ ######################################################################
+-$INCLUDE policy.conf
++#$INCLUDE policy.conf
+
+ ######################################################################
+ #
+@@ -777,9 +759,9 @@ $INCLUDE policy.conf
+ # match the regular expression: /[a-zA-Z0-9_.]+/
+ #
+ # It allows you to define new virtual servers simply by placing
+-# a file into the raddb/sites-enabled/ directory.
++# a file into the /etc/freeradius2/sites/ directory.
+ #
+-$INCLUDE sites-enabled/
++$INCLUDE sites/
+
+ ######################################################################
+ #
+@@ -787,15 +769,11 @@ $INCLUDE sites-enabled/
+ # "authenticate {}", "accounting {}", have been moved to the
+ # the file:
+ #
+-# raddb/sites-available/default
++# /etc/freeradius2/sites/default
+ #
+ # This is the "default" virtual server that has the same
+ # configuration as in version 1.0.x and 1.1.x. The default
+ # installation enables this virtual server. You should
+ # edit it to create policies for your local site.
+ #
+-# For more documentation on virtual servers, see:
+-#
+-# raddb/sites-available/README
+-#
+ ######################################################################
+--- a/raddb/sites-available/default
++++ b/raddb/sites-available/default
+@@ -11,12 +11,6 @@
+ #
+ ######################################################################
+ #
+-# Read "man radiusd" before editing this file. See the section
+-# titled DEBUGGING. It outlines a method where you can quickly
+-# obtain the configuration you want, without running into
+-# trouble. See also "man unlang", which documents the format
+-# of this file.
+-#
+ # This configuration is designed to work in the widest possible
+ # set of circumstances, with the widest possible number of
+ # authentication methods. This means that in general, you should
+@@ -67,7 +61,7 @@ authorize {
+ #
+ # It takes care of processing the 'raddb/hints' and the
+ # 'raddb/huntgroups' files.
+- preprocess
++# preprocess
+
+ #
+ # If you want to have a log of authentication requests,
+@@ -78,7 +72,7 @@ authorize {
+ #
+ # The chap module will set 'Auth-Type := CHAP' if we are
+ # handling a CHAP request and Auth-Type has not already been set
+- chap
++# chap
+
+ #
+ # If the users are logging in with an MS-CHAP-Challenge
+@@ -86,13 +80,7 @@ authorize {
+ # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
+ # to the request, which will cause the server to then use
+ # the mschap module for authentication.
+- mschap
+-
+- #
+- # If you have a Cisco SIP server authenticating against
+- # FreeRADIUS, uncomment the following line, and the 'digest'
+- # line in the 'authenticate' section.
+-# digest
++# mschap
+
+ #
+ # The WiMAX specification says that the Calling-Station-Id
+@@ -115,7 +103,7 @@ authorize {
+ # Otherwise, when the first style of realm doesn't match,
+ # the other styles won't be checked.
+ #
+- suffix
++# suffix
+ # ntdomain
+
+ #
+@@ -140,14 +128,6 @@ authorize {
+ }
+
+ #
+- # Pull crypt'd passwords from /etc/passwd or /etc/shadow,
+- # using the system API's to get the password. If you want
+- # to read /etc/passwd or /etc/shadow directly, see the
+- # passwd module in radiusd.conf.
+- #
+- unix
+-
+- #
+ # Read the 'users' file
+ files
+
+@@ -159,28 +139,11 @@ authorize {
+ # sql
+
+ #
+- # If you are using /etc/smbpasswd, and are also doing
+- # mschap authentication, the un-comment this line, and
+- # configure the 'etc_smbpasswd' module, above.
+-# etc_smbpasswd
+-
+- #
+ # The ldap module will set Auth-Type to LDAP if it has not
+ # already been set
+ # ldap
+
+ #
+- # Enforce daily limits on time spent logged in.
+-# daily
+-
+- #
+- # Use the checkval module
+-# checkval
+-
+- expiration
+- logintime
+-
+- #
+ # If no other module has claimed responsibility for
+ # authentication, then try to use PAP. This allows the
+ # other modules listed above to add a "known good" password
+@@ -255,24 +218,6 @@ authenticate {
+ mschap
+ }
+
+- #
+- # If you have a Cisco SIP server authenticating against
+- # FreeRADIUS, uncomment the following line, and the 'digest'
+- # line in the 'authorize' section.
+-# digest
+-
+- #
+- # Pluggable Authentication Modules.
+-# pam
+-
+- #
+- # See 'man getpwent' for information on how the 'unix'
+- # module checks the users password. Note that packets
+- # containing CHAP-Password attributes CANNOT be authenticated
+- # against /etc/passwd! See the FAQ for details.
+- #
+- unix
+-
+ # Uncomment it if you want to use ldap for authentication
+ #
+ # Note that this means "check plain-text password against
+@@ -307,13 +252,13 @@ authenticate {
+ #
+ # Pre-accounting. Decide which accounting type to use.
+ #
+-preacct {
+- preprocess
++#preacct {
++# preprocess
+
+ #
+ # Ensure that we have a semi-unique identifier for every
+ # request, and many NAS boxes are broken.
+- acct_unique
++# acct_unique
+
+ #
+ # Look for IPASS-style 'realm/', and if not found, look for
+@@ -323,13 +268,13 @@ preacct {
+ # Accounting requests are generally proxied to the same
+ # home server as authentication requests.
+ # IPASS
+- suffix
++# suffix
+ # ntdomain
+
+ #
+ # Read the 'acct_users' file
+- files
+-}
++# files
++#}
+
+ #
+ # Accounting. Log the accounting data.
+@@ -339,14 +284,9 @@ accounting {
+ # Create a 'detail'ed log of the packets.
+ # Note that accounting requests which are proxied
+ # are also logged in the detail file.
+- detail
++# detail
+ # daily
+
+- # Update the wtmp file
+- #
+- # If you don't use "radlast", you can delete this line.
+- unix
+-
+ #
+ # For Simultaneous-Use tracking.
+ #
+@@ -355,9 +295,6 @@ accounting {
+ radutmp
+ # sradutmp
+
+- # Return an address to the IP Pool when we see a stop record.
+-# main_pool
+-
+ #
+ # Log traffic to an SQL database.
+ #
+@@ -374,7 +311,7 @@ accounting {
+ # pgsql-voip
+
+ # Filter attributes from the accounting response.
+- attr_filter.accounting_response
++ #attr_filter.accounting_response
+
+ #
+ # See "Autz-Type Status-Server" for how this works.
+@@ -400,10 +337,7 @@ session {
+ # Post-Authentication
+ # Once we KNOW that the user has been authenticated, there are
+ # additional steps we can take.
+-post-auth {
+- # Get an address from the IP Pool.
+-# main_pool
+-
++#post-auth {
+ #
+ # If you want to have a log of authentication replies,
+ # un-comment the following line, and the 'detail reply_log'
+@@ -429,7 +363,7 @@ post-auth {
+ #
+ # ldap
+
+- exec
++# exec
+
+ #
+ # Calculate the various WiMAX keys. In order for this to work,
+@@ -473,10 +407,10 @@ post-auth {
+ # Add the ldap module name (or instance) if you have set
+ # 'edir_account_policy_check = yes' in the ldap module configuration
+ #
+- Post-Auth-Type REJECT {
+- attr_filter.access_reject
+- }
+-}
++# Post-Auth-Type REJECT {
++# attr_filter.access_reject
++# }
++#}
+
+ #
+ # When the server decides to proxy a request to a home server,
+@@ -486,7 +420,7 @@ post-auth {
+ #
+ # Only a few modules currently have this method.
+ #
+-pre-proxy {
++#pre-proxy {
+ # attr_rewrite
+
+ # Uncomment the following line if you want to change attributes
+@@ -502,14 +436,14 @@ pre-proxy {
+ # server, un-comment the following line, and the
+ # 'detail pre_proxy_log' section, above.
+ # pre_proxy_log
+-}
++#}
+
+ #
+ # When the server receives a reply to a request it proxied
+ # to a home server, the request may be massaged here, in the
+ # post-proxy stage.
+ #
+-post-proxy {
++#post-proxy {
+
+ # If you want to have a log of replies from a home server,
+ # un-comment the following line, and the 'detail post_proxy_log'
+@@ -533,7 +467,7 @@ post-proxy {
+ # hidden inside of the EAP packet, and the end server will
+ # reject the EAP request.
+ #
+- eap
++# eap
+
+ #
+ # If the server tries to proxy a request and fails, then the
+@@ -555,6 +489,5 @@ post-proxy {
+ # Post-Proxy-Type Fail {
+ # detail
+ # }
+-
+-}
++#}
+
+--- a/raddb/users
++++ b/raddb/users
+@@ -1,6 +1,5 @@
+ #
+-# Please read the documentation file ../doc/processing_users_file,
+-# or 'man 5 users' (after installing the server) for more information.
++# Please read the documentation file ../doc/processing_users_file.
+ #
+ # This file contains authentication security and configuration
+ # information for each user. Accounting requests are NOT processed
+@@ -169,22 +168,22 @@
+ # by the terminal server in which case there may not be a "P" suffix.
+ # The terminal server sends "Framed-Protocol = PPP" for auto PPP.
+ #
+-DEFAULT Framed-Protocol == PPP
+- Framed-Protocol = PPP,
+- Framed-Compression = Van-Jacobson-TCP-IP
++#DEFAULT Framed-Protocol == PPP
++# Framed-Protocol = PPP,
++# Framed-Compression = Van-Jacobson-TCP-IP
+
+ #
+ # Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
+ #
+-DEFAULT Hint == "CSLIP"
+- Framed-Protocol = SLIP,
+- Framed-Compression = Van-Jacobson-TCP-IP
++#DEFAULT Hint == "CSLIP"
++# Framed-Protocol = SLIP,
++# Framed-Compression = Van-Jacobson-TCP-IP
+
+ #
+ # Default for SLIP: dynamic IP address, SLIP mode.
+ #
+-DEFAULT Hint == "SLIP"
+- Framed-Protocol = SLIP
++#DEFAULT Hint == "SLIP"
++# Framed-Protocol = SLIP
+
+ #
+ # Last default: rlogin to our main server.
--- /dev/null
+--- a/src/modules/rlm_ldap/configure
++++ b/src/modules/rlm_ldap/configure
+@@ -1,10 +1,10 @@
+ #! /bin/sh
+ # From configure.in Revision.
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.61.
++# Generated by GNU Autoconf 2.63.
+ #
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+ ## --------------------- ##
+@@ -16,7 +16,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -38,17 +38,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
+ as_cr_digits='0123456789'
+ as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+-# The user is always right.
+-if test "${PATH_SEPARATOR+set}" != set; then
+- echo "#! /bin/sh" >conf$$.sh
+- echo "exit 0" >>conf$$.sh
+- chmod +x conf$$.sh
+- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+- PATH_SEPARATOR=';'
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
+ else
+- PATH_SEPARATOR=:
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+- rm -f conf$$.sh
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
+ fi
+
+ # Support unset when possible.
+@@ -64,8 +92,6 @@ fi
+ # there to prevent editors from complaining about space-tab.
+ # (If _AS_PATH_WALK were called with IFS unset, it would disable word
+ # splitting by setting IFS to empty value.)
+-as_nl='
+-'
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+@@ -88,7 +114,7 @@ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+ fi
+
+@@ -101,17 +127,10 @@ PS2='> '
+ PS4='+ '
+
+ # NLS nuisances.
+-for as_var in \
+- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+- LC_TELEPHONE LC_TIME
+-do
+- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+- eval $as_var=C; export $as_var
+- else
+- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+- fi
+-done
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
+
+ # Required to use basename.
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+@@ -133,7 +152,7 @@ as_me=`$as_basename -- "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-echo X/"$0" |
++$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+@@ -159,7 +178,7 @@ else
+ as_have_required=no
+ fi
+
+- if test $as_have_required = yes && (eval ":
++ if test $as_have_required = yes && (eval ":
+ (as_func_return () {
+ (exit \$1)
+ }
+@@ -241,7 +260,7 @@ IFS=$as_save_IFS
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -262,7 +281,7 @@ _ASEOF
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -342,10 +361,10 @@ fi
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+- done
+- export CONFIG_SHELL
+- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++ done
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ fi
+
+
+@@ -414,9 +433,10 @@ fi
+
+ test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+- echo Please tell autoconf@gnu.org about your system,
+- echo including any error possibly output before this
+- echo message
++ echo Please tell bug-autoconf@gnu.org about your system,
++ echo including any error possibly output before this message.
++ echo This can help us improve future autoconf versions.
++ echo Configuration will now proceed without shell functions.
+ }
+
+
+@@ -452,7 +472,7 @@ test \$exitcode = 0") || {
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+@@ -480,7 +500,6 @@ case `echo -n x` in
+ *)
+ ECHO_N='-n';;
+ esac
+-
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+@@ -493,19 +512,22 @@ if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+ else
+ rm -f conf$$.dir
+- mkdir conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
+ fi
+-echo >conf$$.file
+-if ln -s conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s='ln -s'
+- # ... but there are two gotchas:
+- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+- # In both cases, we have to default to `cp -p'.
+- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
+ as_ln_s='cp -p'
+-elif ln conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s=ln
++ fi
+ else
+ as_ln_s='cp -p'
+ fi
+@@ -530,10 +552,10 @@ else
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+- test -d "$1/.";
++ test -d "$1/.";
+ else
+ case $1 in
+- -*)set "./$1";;
++ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+@@ -578,57 +600,65 @@ PACKAGE_STRING=
+ PACKAGE_BUGREPORT=
+
+ ac_unique_file="rlm_ldap.c"
+-ac_subst_vars='SHELL
+-PATH_SEPARATOR
+-PACKAGE_NAME
+-PACKAGE_TARNAME
+-PACKAGE_VERSION
+-PACKAGE_STRING
+-PACKAGE_BUGREPORT
+-exec_prefix
+-prefix
+-program_transform_name
+-bindir
+-sbindir
+-libexecdir
+-datarootdir
+-datadir
+-sysconfdir
+-sharedstatedir
+-localstatedir
+-includedir
+-oldincludedir
+-docdir
+-infodir
+-htmldir
+-dvidir
+-pdfdir
+-psdir
+-libdir
+-localedir
+-mandir
+-DEFS
+-ECHO_C
+-ECHO_N
+-ECHO_T
+-LIBS
+-build_alias
+-host_alias
+-target_alias
+-CC
+-CFLAGS
+-LDFLAGS
+-CPPFLAGS
+-ac_ct_CC
+-EXEEXT
+-OBJEXT
+-edir
+-ldap_ldflags
+-ldap_cflags
+-targetname
++ac_subst_vars='LTLIBOBJS
+ LIBOBJS
+-LTLIBOBJS'
++targetname
++ldap_cflags
++ldap_ldflags
++edir
++OBJEXT
++EXEEXT
++ac_ct_CC
++CPPFLAGS
++LDFLAGS
++CFLAGS
++CC
++target_alias
++host_alias
++build_alias
++LIBS
++ECHO_T
++ECHO_N
++ECHO_C
++DEFS
++mandir
++localedir
++libdir
++psdir
++pdfdir
++dvidir
++htmldir
++infodir
++docdir
++oldincludedir
++includedir
++localstatedir
++sharedstatedir
++sysconfdir
++datadir
++datarootdir
++libexecdir
++sbindir
++bindir
++program_transform_name
++prefix
++exec_prefix
++PACKAGE_BUGREPORT
++PACKAGE_STRING
++PACKAGE_VERSION
++PACKAGE_TARNAME
++PACKAGE_NAME
++PATH_SEPARATOR
++SHELL'
+ ac_subst_files=''
++ac_user_opts='
++enable_option_checking
++with_rlm_ldap_lib_dir
++with_rlm_ldap_include_dir
++enable_shared
++with_threads
++with_edir
++'
+ ac_precious_vars='build_alias
+ host_alias
+ target_alias
+@@ -642,6 +672,8 @@ CPPFLAGS'
+ # Initialize some variables set by options.
+ ac_init_help=
+ ac_init_version=false
++ac_unrecognized_opts=
++ac_unrecognized_sep=
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+ cache_file=/dev/null
+@@ -740,13 +772,21 @@ do
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
+- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+- eval enable_$ac_feature=no ;;
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+@@ -759,13 +799,21 @@ do
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
+- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+- eval enable_$ac_feature=\$ac_optarg ;;
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -956,22 +1004,38 @@ do
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- { echo "$as_me: error: invalid package name: $ac_package" >&2
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
+- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+- eval with_$ac_package=\$ac_optarg ;;
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- { echo "$as_me: error: invalid package name: $ac_package" >&2
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
+- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+- eval with_$ac_package=no ;;
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -991,7 +1055,7 @@ do
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+- -*) { echo "$as_me: error: unrecognized option: $ac_option
++ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+ Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+@@ -1000,16 +1064,16 @@ Try \`$0 --help' for more information."
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+@@ -1018,22 +1082,38 @@ done
+
+ if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+- { echo "$as_me: error: missing argument to $ac_option" >&2
++ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+ fi
+
+-# Be sure to have absolute directory names.
++if test -n "$ac_unrecognized_opts"; then
++ case $enable_option_checking in
++ no) ;;
++ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
++ { (exit 1); exit 1; }; } ;;
++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
++ esac
++fi
++
++# Check all directory arguments for consistency.
+ for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+ do
+ eval ac_val=\$$ac_var
++ # Remove trailing slashes.
++ case $ac_val in
++ */ )
++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
++ eval $ac_var=\$ac_val;;
++ esac
++ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+ done
+
+@@ -1048,7 +1128,7 @@ target=$target_alias
+ if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+@@ -1064,10 +1144,10 @@ test "$silent" = yes && exec 6>/dev/null
+ ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ ac_ls_di=`ls -di .` &&
+ ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+- { echo "$as_me: error: Working directory cannot be determined" >&2
++ { $as_echo "$as_me: error: working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+- { echo "$as_me: error: pwd does not report name of working directory" >&2
++ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+@@ -1075,12 +1155,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+- ac_confdir=`$as_dirname -- "$0" ||
+-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$0" : 'X\(//\)[^/]' \| \
+- X"$0" : 'X\(//\)$' \| \
+- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-echo X"$0" |
++ ac_confdir=`$as_dirname -- "$as_myself" ||
++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_myself" : 'X\(//\)[^/]' \| \
++ X"$as_myself" : 'X\(//\)$' \| \
++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -1107,12 +1187,12 @@ else
+ fi
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
++ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ ac_abs_confdir=`(
+- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
++ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+ # When building in place, set srcdir=.
+@@ -1161,9 +1241,9 @@ Configuration:
+
+ Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
++ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [PREFIX]
++ [PREFIX]
+
+ By default, \`make install' will install all the files in
+ \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+@@ -1173,25 +1253,25 @@ for instance \`--prefix=\$HOME'.
+ For better control, use the options below.
+
+ Fine tuning of the installation directories:
+- --bindir=DIR user executables [EPREFIX/bin]
+- --sbindir=DIR system admin executables [EPREFIX/sbin]
+- --libexecdir=DIR program executables [EPREFIX/libexec]
+- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+- --libdir=DIR object code libraries [EPREFIX/lib]
+- --includedir=DIR C header files [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc [/usr/include]
+- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+- --infodir=DIR info documentation [DATAROOTDIR/info]
+- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+- --mandir=DIR man documentation [DATAROOTDIR/man]
+- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+- --htmldir=DIR html documentation [DOCDIR]
+- --dvidir=DIR dvi documentation [DOCDIR]
+- --pdfdir=DIR pdf documentation [DOCDIR]
+- --psdir=DIR ps documentation [DOCDIR]
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
++ --infodir=DIR info documentation [DATAROOTDIR/info]
++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
++ --mandir=DIR man documentation [DATAROOTDIR/man]
++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
++ --htmldir=DIR html documentation [DOCDIR]
++ --dvidir=DIR dvi documentation [DOCDIR]
++ --pdfdir=DIR pdf documentation [DOCDIR]
++ --psdir=DIR ps documentation [DOCDIR]
+ _ACEOF
+
+ cat <<\_ACEOF
+@@ -1203,6 +1283,7 @@ if test -n "$ac_init_help"; then
+ cat <<\_ACEOF
+
+ Optional Features:
++ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+@@ -1234,15 +1315,17 @@ fi
+ if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+- test -d "$ac_dir" || continue
++ test -d "$ac_dir" ||
++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
++ continue
+ ac_builddir=.
+
+ case "$ac_dir" in
+ .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *)
+- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+@@ -1278,7 +1361,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+@@ -1288,10 +1371,10 @@ test -n "$ac_init_help" && exit $ac_stat
+ if $ac_init_version; then
+ cat <<\_ACEOF
+ configure
+-generated by GNU Autoconf 2.61
++generated by GNU Autoconf 2.63
+
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ _ACEOF
+@@ -1302,7 +1385,7 @@ This file contains any messages produced
+ running configure, to aid debugging if configure makes a mistake.
+
+ It was created by $as_me, which was
+-generated by GNU Autoconf 2.61. Invocation command line was
++generated by GNU Autoconf 2.63. Invocation command line was
+
+ $ $0 $@
+
+@@ -1338,7 +1421,7 @@ for as_dir in $PATH
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- echo "PATH: $as_dir"
++ $as_echo "PATH: $as_dir"
+ done
+ IFS=$as_save_IFS
+
+@@ -1373,7 +1456,7 @@ do
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+@@ -1425,11 +1508,12 @@ _ASBOX
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+@@ -1459,9 +1543,9 @@ _ASBOX
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+- echo "$ac_var='\''$ac_val'\''"
++ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+@@ -1476,9 +1560,9 @@ _ASBOX
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+- echo "$ac_var='\''$ac_val'\''"
++ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+@@ -1494,8 +1578,8 @@ _ASBOX
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+- echo "$as_me: caught signal $ac_signal"
+- echo "$as_me: exit $exit_status"
++ $as_echo "$as_me: caught signal $ac_signal"
++ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+@@ -1537,21 +1621,24 @@ _ACEOF
+
+
+ # Let the site file select an alternate cache file if it wants to.
+-# Prefer explicitly selected file to automatically selected ones.
++# Prefer an explicitly selected file to automatically selected ones.
++ac_site_file1=NONE
++ac_site_file2=NONE
+ if test -n "$CONFIG_SITE"; then
+- set x "$CONFIG_SITE"
++ ac_site_file1=$CONFIG_SITE
+ elif test "x$prefix" != xNONE; then
+- set x "$prefix/share/config.site" "$prefix/etc/config.site"
++ ac_site_file1=$prefix/share/config.site
++ ac_site_file2=$prefix/etc/config.site
+ else
+- set x "$ac_default_prefix/share/config.site" \
+- "$ac_default_prefix/etc/config.site"
++ ac_site_file1=$ac_default_prefix/share/config.site
++ ac_site_file2=$ac_default_prefix/etc/config.site
+ fi
+-shift
+-for ac_site_file
++for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+ do
++ test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+-echo "$as_me: loading site script $ac_site_file" >&6;}
++ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
++$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+@@ -1561,16 +1648,16 @@ if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+-echo "$as_me: loading cache $cache_file" >&6;}
++ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
++$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+ else
+- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+-echo "$as_me: creating cache $cache_file" >&6;}
++ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
++$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+ fi
+
+@@ -1584,29 +1671,38 @@ for ac_var in $ac_precious_vars; do
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+-echo "$as_me: former value: $ac_old_val" >&2;}
+- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+-echo "$as_me: current value: $ac_new_val" >&2;}
+- ac_cache_corrupted=:
++ # differences in whitespace do not lead to failure.
++ ac_old_val_w=`echo x $ac_old_val`
++ ac_new_val_w=`echo x $ac_new_val`
++ if test "$ac_old_val_w" != "$ac_new_val_w"; then
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ ac_cache_corrupted=:
++ else
++ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
++ eval $ac_var=\$ac_old_val
++ fi
++ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
++ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+@@ -1616,10 +1712,12 @@ echo "$as_me: current value: $ac_new_v
+ fi
+ done
+ if $ac_cache_corrupted; then
+- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -1662,10 +1760,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}gcc; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -1678,7 +1776,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1689,11 +1787,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+@@ -1702,10 +1800,10 @@ if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+@@ -1718,7 +1816,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1729,11 +1827,11 @@ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-echo "${ECHO_T}$ac_ct_CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+ if test "x$ac_ct_CC" = x; then
+@@ -1741,12 +1839,8 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+-whose name does not start with the host triplet. If you think this
+-configuration is useful to you, please write to autoconf@gnu.org." >&5
+-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+-whose name does not start with the host triplet. If you think this
+-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+ CC=$ac_ct_CC
+@@ -1759,10 +1853,10 @@ if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}cc; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -1775,7 +1869,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1786,11 +1880,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+@@ -1799,10 +1893,10 @@ fi
+ if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -1820,7 +1914,7 @@ do
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1843,11 +1937,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+@@ -1858,10 +1952,10 @@ if test -z "$CC"; then
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -1874,7 +1968,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1885,11 +1979,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+@@ -1902,10 +1996,10 @@ if test -z "$CC"; then
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+@@ -1918,7 +2012,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -1929,11 +2023,11 @@ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-echo "${ECHO_T}$ac_ct_CC" >&6; }
++ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+@@ -1945,12 +2039,8 @@ done
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+-whose name does not start with the host triplet. If you think this
+-configuration is useful to you, please write to autoconf@gnu.org." >&5
+-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+-whose name does not start with the host triplet. If you think this
+-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+ CC=$ac_ct_CC
+@@ -1960,44 +2050,50 @@ fi
+ fi
+
+
+-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
++test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+ See \`config.log' for more details." >&5
+-echo "$as_me: error: no acceptable C compiler found in \$PATH
++$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
+ See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }
++ { (exit 1); exit 1; }; }; }
+
+ # Provide some information about the compiler.
+-echo "$as_me:$LINENO: checking for C compiler version" >&5
+-ac_compiler=`set X $ac_compile; echo $2`
++$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
++set X $ac_compile
++ac_compiler=$2
+ { (ac_try="$ac_compiler --version >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -v >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -V >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+ cat >conftest.$ac_ext <<_ACEOF
+@@ -2016,27 +2112,22 @@ main ()
+ }
+ _ACEOF
+ ac_clean_files_save=$ac_clean_files
+-ac_clean_files="$ac_clean_files a.out a.exe b.out"
++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+ # Try to create an executable without -o first, disregard a.out.
+ # It will help us diagnose broken compilers, and finding out an intuition
+ # of exeext.
+-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+-#
+-# List of possible output files, starting from the most likely.
+-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+-# only as a last resort. b.out is created by i960 compilers.
+-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+-#
+-# The IRIX 6 linker writes into existing files which may not be
+-# executable, retaining their permissions. Remove them first so a
+-# subsequent execution test works.
++{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
++$as_echo_n "checking for C compiler default output file name... " >&6; }
++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++
++# The possible output files:
++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
++
+ ac_rmfiles=
+ for ac_file in $ac_files
+ do
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+ done
+@@ -2047,10 +2138,11 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+ # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+@@ -2061,7 +2153,7 @@ for ac_file in $ac_files ''
+ do
+ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+@@ -2088,25 +2180,27 @@ else
+ ac_file=''
+ fi
+
+-{ echo "$as_me:$LINENO: result: $ac_file" >&5
+-echo "${ECHO_T}$ac_file" >&6; }
++{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
++$as_echo "$ac_file" >&6; }
+ if test -z "$ac_file"; then
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
++{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
+ See \`config.log' for more details." >&5
+-echo "$as_me: error: C compiler cannot create executables
++$as_echo "$as_me: error: C compiler cannot create executables
+ See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }
++ { (exit 77); exit 77; }; }; }
+ fi
+
+ ac_exeext=$ac_cv_exeext
+
+ # Check that the compiler produces executables we can run. If not, either
+ # the compiler is broken, or we cross compile.
+-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
++$as_echo_n "checking whether the C compiler works... " >&6; }
+ # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+ # If not cross compiling, check that we can run a simple program.
+ if test "$cross_compiling" != yes; then
+@@ -2115,49 +2209,53 @@ if test "$cross_compiling" != yes; then
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
++ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'.
+ See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot run C compiled programs.
++$as_echo "$as_me: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'.
+ See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }
++ { (exit 1); exit 1; }; }; }
+ fi
+ fi
+ fi
+-{ echo "$as_me:$LINENO: result: yes" >&5
+-echo "${ECHO_T}yes" >&6; }
++{ $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+
+-rm -f a.out a.exe conftest$ac_cv_exeext b.out
++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ ac_clean_files=$ac_clean_files_save
+ # Check that the compiler produces executables we can run. If not, either
+ # the compiler is broken, or we cross compile.
+-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+-echo "${ECHO_T}$cross_compiling" >&6; }
++{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
++$as_echo_n "checking whether we are cross compiling... " >&6; }
++{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
++$as_echo "$cross_compiling" >&6; }
+
+-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
++$as_echo_n "checking for suffix of executables... " >&6; }
+ if { (ac_try="$ac_link"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+ # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+@@ -2166,31 +2264,33 @@ eval "echo \"\$as_me:$LINENO: $ac_try_ec
+ for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+ done
+ else
+- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
++ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
++$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+ See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }
++ { (exit 1); exit 1; }; }; }
+ fi
+
+ rm -f conftest$ac_cv_exeext
+-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+-echo "${ECHO_T}$ac_cv_exeext" >&6; }
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
++$as_echo "$ac_cv_exeext" >&6; }
+
+ rm -f conftest.$ac_ext
+ EXEEXT=$ac_cv_exeext
+ ac_exeext=$EXEEXT
+-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
++$as_echo_n "checking for suffix of object files... " >&6; }
+ if test "${ac_cv_objext+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -2213,40 +2313,43 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+ done
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
++{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+ See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot compute suffix of object files: cannot compile
++$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
+ See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }
++ { (exit 1); exit 1; }; }; }
+ fi
+
+ rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+-echo "${ECHO_T}$ac_cv_objext" >&6; }
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
++$as_echo "$ac_cv_objext" >&6; }
+ OBJEXT=$ac_cv_objext
+ ac_objext=$OBJEXT
+-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+ if test "${ac_cv_c_compiler_gnu+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -2272,20 +2375,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+@@ -2295,15 +2399,19 @@ rm -f core conftest.err conftest.$ac_obj
+ ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+-GCC=`test $ac_compiler_gnu = yes && echo yes`
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
++$as_echo "$ac_cv_c_compiler_gnu" >&6; }
++if test $ac_compiler_gnu = yes; then
++ GCC=yes
++else
++ GCC=
++fi
+ ac_test_CFLAGS=${CFLAGS+set}
+ ac_save_CFLAGS=$CFLAGS
+-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
++$as_echo_n "checking whether $CC accepts -g... " >&6; }
+ if test "${ac_cv_prog_cc_g+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+@@ -2330,20 +2438,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+@@ -2368,20 +2477,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+@@ -2407,20 +2517,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+@@ -2435,8 +2546,8 @@ fi
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
++$as_echo "$ac_cv_prog_cc_g" >&6; }
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+ elif test $ac_cv_prog_cc_g = yes; then
+@@ -2452,10 +2563,10 @@ else
+ CFLAGS=
+ fi
+ fi
+-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
++{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+ if test "${ac_cv_prog_cc_c89+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ ac_cv_prog_cc_c89=no
+ ac_save_CC=$CC
+@@ -2526,20 +2637,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+@@ -2555,15 +2667,15 @@ fi
+ # AC_CACHE_VAL
+ case "x$ac_cv_prog_cc_c89" in
+ x)
+- { echo "$as_me:$LINENO: result: none needed" >&5
+-echo "${ECHO_T}none needed" >&6; } ;;
++ { $as_echo "$as_me:$LINENO: result: none needed" >&5
++$as_echo "none needed" >&6; } ;;
+ xno)
+- { echo "$as_me:$LINENO: result: unsupported" >&5
+-echo "${ECHO_T}unsupported" >&6; } ;;
++ { $as_echo "$as_me:$LINENO: result: unsupported" >&5
++$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
++ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+ esac
+
+
+@@ -2581,8 +2693,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ if test "${with_rlm_ldap_lib_dir+set}" = set; then
+ withval=$with_rlm_ldap_lib_dir; case "$withval" in
+ no)
+- { { echo "$as_me:$LINENO: error: Need rlm-ldap-lib-dir" >&5
+-echo "$as_me: error: Need rlm-ldap-lib-dir" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: Need rlm-ldap-lib-dir" >&5
++$as_echo "$as_me: error: Need rlm-ldap-lib-dir" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ yes)
+@@ -2601,8 +2713,8 @@ fi
+ if test "${with_rlm_ldap_include_dir+set}" = set; then
+ withval=$with_rlm_ldap_include_dir; case "$withval" in
+ no)
+- { { echo "$as_me:$LINENO: error: Need rlm-ldap-include-dir" >&5
+-echo "$as_me: error: Need rlm-ldap-include-dir" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: Need rlm-ldap-include-dir" >&5
++$as_echo "$as_me: error: Need rlm-ldap-include-dir" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ yes)
+@@ -2641,8 +2753,8 @@ fi
+
+
+ if test "x$enable_shared" = "xno"; then
+- { echo "$as_me:$LINENO: WARNING: Static linking with libldap will probably result in unresolved symbols." >&5
+-echo "$as_me: WARNING: Static linking with libldap will probably result in unresolved symbols." >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: Static linking with libldap will probably result in unresolved symbols." >&5
++$as_echo "$as_me: WARNING: Static linking with libldap will probably result in unresolved symbols." >&2;}
+ fi
+
+ rlm_ldap_with_threads=yes
+@@ -2661,10 +2773,10 @@ fi
+
+
+ if test "x$rlm_ldap_with_threads" = "xyes"; then
+- { echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
+-echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
++$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
+ if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lpthread $LIBS"
+@@ -2696,39 +2808,43 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ ac_cv_lib_pthread_pthread_create=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_pthread_pthread_create=no
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5
+-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6; }
+-if test $ac_cv_lib_pthread_pthread_create = yes; then
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5
++$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
++if test "x$ac_cv_lib_pthread_pthread_create" = x""yes; then
+ LIBS="-lpthread $LIBS"
+ else
+- { echo "$as_me:$LINENO: checking for pthread_create in -lc_r" >&5
+-echo $ECHO_N "checking for pthread_create in -lc_r... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking for pthread_create in -lc_r" >&5
++$as_echo_n "checking for pthread_create in -lc_r... " >&6; }
+ if test "${ac_cv_lib_c_r_pthread_create+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lc_r $LIBS"
+@@ -2761,33 +2877,37 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ ac_cv_lib_c_r_pthread_create=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_c_r_pthread_create=no
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_create" >&5
+-echo "${ECHO_T}$ac_cv_lib_c_r_pthread_create" >&6; }
+-if test $ac_cv_lib_c_r_pthread_create = yes; then
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_create" >&5
++$as_echo "$ac_cv_lib_c_r_pthread_create" >&6; }
++if test "x$ac_cv_lib_c_r_pthread_create" = x""yes; then
+ LIBS="-lc_r $LIBS"
+ else
+ rlm_ldap_with_threads="no"
+@@ -2799,14 +2919,12 @@ fi
+
+ fi
+
+- smart_try_dir=$rlm_ldap_lib_dir
+- if test "x$rlm_ldap_with_threads" = "xyes"; then
+
+
+-sm_lib_safe=`echo "ldap_r" | sed 'y%./+-%__p_%'`
+-sm_func_safe=`echo "ldap_init" | sed 'y%./+-%__p_%'`
+-{ echo "$as_me:$LINENO: checking for ldap_init in -lldap_r" >&5
+-echo $ECHO_N "checking for ldap_init in -lldap_r... $ECHO_C" >&6; }
++sm_lib_safe=`echo "sasl" | sed 'y%./+-%__p_%'`
++sm_func_safe=`echo "sasl_encode" | sed 'y%./+-%__p_%'`
++{ $as_echo "$as_me:$LINENO: checking for sasl_encode in -lsasl" >&5
++$as_echo_n "checking for sasl_encode in -lsasl... " >&6; }
+
+ old_LIBS="$LIBS"
+ smart_lib=
+@@ -2814,18 +2932,18 @@ smart_lib_dir=
+
+ if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+- LIBS="-L$try -lldap_r $old_LIBS"
++ LIBS="-L$try -lsasl $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char sasl_encode();
+ int
+ main ()
+ {
+- ldap_init()
++ sasl_encode()
+ ;
+ return 0;
+ }
+@@ -2836,26 +2954,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-L$try -lldap_r"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lsasl"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "x$smart_lib" != "x"; then
+@@ -2866,18 +2988,18 @@ rm -f core conftest.err conftest.$ac_obj
+ fi
+
+ if test "x$smart_lib" = "x"; then
+- LIBS="-lldap_r $old_LIBS"
++ LIBS="-lsasl $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char sasl_encode();
+ int
+ main ()
+ {
+- ldap_init()
++ sasl_encode()
+ ;
+ return 0;
+ }
+@@ -2888,26 +3010,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-lldap_r"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-lsasl"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$old_LIBS"
+@@ -2918,7 +3044,7 @@ if test "x$smart_lib" = "x"; then
+
+ if test "x$LOCATE" != "x"; then
+ DIRS=
+- file=libldap_r${libltdl_cv_shlibext}
++ file=libsasl${libltdl_cv_shlibext}
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+@@ -2945,7 +3071,7 @@ eval "smart_lib_dir=\"\$smart_lib_dir $D
+
+ if test "x$LOCATE" != "x"; then
+ DIRS=
+- file=libldap_r.a
++ file=libsasl.a
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+@@ -2970,18 +3096,18 @@ eval "smart_lib_dir=\"\$smart_lib_dir $D
+
+
+ for try in $smart_lib_dir /usr/local/lib /opt/lib; do
+- LIBS="-L$try -lldap_r $old_LIBS"
++ LIBS="-L$try -lsasl $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char sasl_encode();
+ int
+ main ()
+ {
+- ldap_init()
++ sasl_encode()
+ ;
+ return 0;
+ }
+@@ -2992,26 +3118,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-L$try -lldap_r"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lsasl"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "x$smart_lib" != "x"; then
+@@ -3022,26 +3152,22 @@ rm -f core conftest.err conftest.$ac_obj
+ fi
+
+ if test "x$smart_lib" != "x"; then
+- { echo "$as_me:$LINENO: result: yes" >&5
+-echo "${ECHO_T}yes" >&6; }
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$smart_lib $old_LIBS"
+ SMART_LIBS="$smart_lib $SMART_LIBS"
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+- if test "x$ac_cv_lib_ldap_r_ldap_init" != "xyes"; then
+- fail="$fail libldap_r"
+- fi
+- else
+
+
+-sm_lib_safe=`echo "ldap" | sed 'y%./+-%__p_%'`
+-sm_func_safe=`echo "ldap_init" | sed 'y%./+-%__p_%'`
+-{ echo "$as_me:$LINENO: checking for ldap_init in -lldap" >&5
+-echo $ECHO_N "checking for ldap_init in -lldap... $ECHO_C" >&6; }
++sm_lib_safe=`echo "lber" | sed 'y%./+-%__p_%'`
++sm_func_safe=`echo "ber_init" | sed 'y%./+-%__p_%'`
++{ $as_echo "$as_me:$LINENO: checking for ber_init in -llber" >&5
++$as_echo_n "checking for ber_init in -llber... " >&6; }
+
+ old_LIBS="$LIBS"
+ smart_lib=
+@@ -3049,18 +3175,18 @@ smart_lib_dir=
+
+ if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+- LIBS="-L$try -lldap $old_LIBS"
++ LIBS="-L$try -llber $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char ber_init();
+ int
+ main ()
+ {
+- ldap_init()
++ ber_init()
+ ;
+ return 0;
+ }
+@@ -3071,26 +3197,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-L$try -lldap"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -llber"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "x$smart_lib" != "x"; then
+@@ -3101,18 +3231,18 @@ rm -f core conftest.err conftest.$ac_obj
+ fi
+
+ if test "x$smart_lib" = "x"; then
+- LIBS="-lldap $old_LIBS"
++ LIBS="-llber $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char ber_init();
+ int
+ main ()
+ {
+- ldap_init()
++ ber_init()
+ ;
+ return 0;
+ }
+@@ -3123,26 +3253,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-lldap"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-llber"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$old_LIBS"
+@@ -3153,7 +3287,7 @@ if test "x$smart_lib" = "x"; then
+
+ if test "x$LOCATE" != "x"; then
+ DIRS=
+- file=libldap${libltdl_cv_shlibext}
++ file=liblber${libltdl_cv_shlibext}
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+@@ -3180,7 +3314,7 @@ eval "smart_lib_dir=\"\$smart_lib_dir $D
+
+ if test "x$LOCATE" != "x"; then
+ DIRS=
+- file=libldap.a
++ file=liblber.a
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+@@ -3205,18 +3339,18 @@ eval "smart_lib_dir=\"\$smart_lib_dir $D
+
+
+ for try in $smart_lib_dir /usr/local/lib /opt/lib; do
+- LIBS="-L$try -lldap $old_LIBS"
++ LIBS="-L$try -llber $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-extern char ldap_init();
++extern char ber_init();
+ int
+ main ()
+ {
+- ldap_init()
++ ber_init()
+ ;
+ return 0;
+ }
+@@ -3227,26 +3361,30 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
+- smart_lib="-L$try -lldap"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -llber"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "x$smart_lib" != "x"; then
+@@ -3257,136 +3395,145 @@ rm -f core conftest.err conftest.$ac_obj
+ fi
+
+ if test "x$smart_lib" != "x"; then
+- { echo "$as_me:$LINENO: result: yes" >&5
+-echo "${ECHO_T}yes" >&6; }
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$smart_lib $old_LIBS"
+ SMART_LIBS="$smart_lib $SMART_LIBS"
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+- if test "x$ac_cv_lib_ldap_ldap_init" != "xyes"; then
+- fail="$fail libldap"
+- fi
+- fi
+-
+
+- smart_try_dir=$rlm_ldap_include_dir
++ smart_try_dir=$rlm_ldap_lib_dir
++ if test "x$rlm_ldap_with_threads" = "xyes"; then
+
+
+-ac_safe=`echo "ldap.h" | sed 'y%./+-%__pm%'`
+-{ echo "$as_me:$LINENO: checking for ldap.h" >&5
+-echo $ECHO_N "checking for ldap.h... $ECHO_C" >&6; }
++sm_lib_safe=`echo "ldap_r" | sed 'y%./+-%__p_%'`
++sm_func_safe=`echo "ldap_init" | sed 'y%./+-%__p_%'`
++{ $as_echo "$as_me:$LINENO: checking for ldap_init in -lldap_r" >&5
++$as_echo_n "checking for ldap_init in -lldap_r... " >&6; }
+
+-old_CFLAGS="$CFLAGS"
+-smart_include=
+-smart_include_dir=
++old_LIBS="$LIBS"
++smart_lib=
++smart_lib_dir=
+
+ if test "x$smart_try_dir" != "x"; then
+ for try in $smart_try_dir; do
+- CFLAGS="$old_CFLAGS -I$try"
++ LIBS="-L$try -lldap_r $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-
+- #include <ldap.h>
++extern char ldap_init();
+ int
+ main ()
+ {
+- int a = 1;
++ ldap_init()
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+- (eval "$ac_compile") 2>conftest.er1
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- smart_include="-I$try"
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lldap_r"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+- smart_include=
++
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- if test "x$smart_include" != "x"; then
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ if test "x$smart_lib" != "x"; then
+ break;
+ fi
+ done
+- CFLAGS="$old_CFLAGS"
++ LIBS="$old_LIBS"
+ fi
+
+-if test "x$smart_include" = "x"; then
++if test "x$smart_lib" = "x"; then
++ LIBS="-lldap_r $old_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h. */
+-
+- #include <ldap.h>
++extern char ldap_init();
+ int
+ main ()
+ {
+- int a = 1;
++ ldap_init()
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+- (eval "$ac_compile") 2>conftest.er1
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- smart_include=" "
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-lldap_r"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+- smart_include=
++
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$old_LIBS"
+ fi
+
+-if test "x$smart_include" = "x"; then
++if test "x$smart_lib" = "x"; then
+
+
+ if test "x$LOCATE" != "x"; then
+ DIRS=
+- file=ldap.h
++ file=libldap_r${libltdl_cv_shlibext}
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+@@ -3400,19 +3547,505 @@ if test "x$LOCATE" != "x"; then
+ continue
+ fi
+
+- already=`echo \$smart_include_dir ${DIRS} | ${GREP} ${dir}`
++ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
+ fi
+
+-eval "smart_include_dir=\"\$smart_include_dir $DIRS\""
++eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
+
+
+- for try in $smart_include_dir /usr/local/include /opt/include; do
+- CFLAGS="$old_CFLAGS -I$try"
+- cat >conftest.$ac_ext <<_ACEOF
++
++if test "x$LOCATE" != "x"; then
++ DIRS=
++ file=libldap_r.a
++
++ for x in `${LOCATE} $file 2>/dev/null`; do
++ base=`echo $x | sed "s%/${file}%%"`
++ if test "x$x" = "x$base"; then
++ continue;
++ fi
++
++ dir=`${DIRNAME} $x 2>/dev/null`
++ exclude=`echo ${dir} | ${GREP} /home`
++ if test "x$exclude" != "x"; then
++ continue
++ fi
++
++ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
++ if test "x$already" = "x"; then
++ DIRS="$DIRS $dir"
++ fi
++ done
++fi
++
++eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
++
++
++ for try in $smart_lib_dir /usr/local/lib /opt/lib; do
++ LIBS="-L$try -lldap_r $old_LIBS"
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++extern char ldap_init();
++int
++main ()
++{
++ ldap_init()
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lldap_r"
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++fi
++
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ if test "x$smart_lib" != "x"; then
++ break;
++ fi
++ done
++ LIBS="$old_LIBS"
++fi
++
++if test "x$smart_lib" != "x"; then
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
++ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
++ LIBS="$smart_lib $old_LIBS"
++ SMART_LIBS="$smart_lib $SMART_LIBS"
++else
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_cv_lib_ldap_r_ldap_init" != "xyes"; then
++ fail="$fail libldap_r"
++ fi
++ else
++
++
++sm_lib_safe=`echo "ldap" | sed 'y%./+-%__p_%'`
++sm_func_safe=`echo "ldap_init" | sed 'y%./+-%__p_%'`
++{ $as_echo "$as_me:$LINENO: checking for ldap_init in -lldap" >&5
++$as_echo_n "checking for ldap_init in -lldap... " >&6; }
++
++old_LIBS="$LIBS"
++smart_lib=
++smart_lib_dir=
++
++if test "x$smart_try_dir" != "x"; then
++ for try in $smart_try_dir; do
++ LIBS="-L$try -lldap $old_LIBS"
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++extern char ldap_init();
++int
++main ()
++{
++ ldap_init()
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lldap"
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++fi
++
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ if test "x$smart_lib" != "x"; then
++ break;
++ fi
++ done
++ LIBS="$old_LIBS"
++fi
++
++if test "x$smart_lib" = "x"; then
++ LIBS="-lldap $old_LIBS"
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++extern char ldap_init();
++int
++main ()
++{
++ ldap_init()
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-lldap"
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++fi
++
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$old_LIBS"
++fi
++
++if test "x$smart_lib" = "x"; then
++
++
++if test "x$LOCATE" != "x"; then
++ DIRS=
++ file=libldap${libltdl_cv_shlibext}
++
++ for x in `${LOCATE} $file 2>/dev/null`; do
++ base=`echo $x | sed "s%/${file}%%"`
++ if test "x$x" = "x$base"; then
++ continue;
++ fi
++
++ dir=`${DIRNAME} $x 2>/dev/null`
++ exclude=`echo ${dir} | ${GREP} /home`
++ if test "x$exclude" != "x"; then
++ continue
++ fi
++
++ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
++ if test "x$already" = "x"; then
++ DIRS="$DIRS $dir"
++ fi
++ done
++fi
++
++eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
++
++
++
++if test "x$LOCATE" != "x"; then
++ DIRS=
++ file=libldap.a
++
++ for x in `${LOCATE} $file 2>/dev/null`; do
++ base=`echo $x | sed "s%/${file}%%"`
++ if test "x$x" = "x$base"; then
++ continue;
++ fi
++
++ dir=`${DIRNAME} $x 2>/dev/null`
++ exclude=`echo ${dir} | ${GREP} /home`
++ if test "x$exclude" != "x"; then
++ continue
++ fi
++
++ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
++ if test "x$already" = "x"; then
++ DIRS="$DIRS $dir"
++ fi
++ done
++fi
++
++eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
++
++
++ for try in $smart_lib_dir /usr/local/lib /opt/lib; do
++ LIBS="-L$try -lldap $old_LIBS"
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++extern char ldap_init();
++int
++main ()
++{
++ ldap_init()
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_link") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
++ smart_lib="-L$try -lldap"
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++fi
++
++rm -rf conftest.dSYM
++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
++ conftest$ac_exeext conftest.$ac_ext
++ if test "x$smart_lib" != "x"; then
++ break;
++ fi
++ done
++ LIBS="$old_LIBS"
++fi
++
++if test "x$smart_lib" != "x"; then
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
++ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
++ LIBS="$smart_lib $old_LIBS"
++ SMART_LIBS="$smart_lib $SMART_LIBS"
++else
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_cv_lib_ldap_ldap_init" != "xyes"; then
++ fail="$fail libldap"
++ fi
++ fi
++
++
++ smart_try_dir=$rlm_ldap_include_dir
++
++
++ac_safe=`echo "ldap.h" | sed 'y%./+-%__pm%'`
++{ $as_echo "$as_me:$LINENO: checking for ldap.h" >&5
++$as_echo_n "checking for ldap.h... " >&6; }
++
++old_CFLAGS="$CFLAGS"
++smart_include=
++smart_include_dir=
++
++if test "x$smart_try_dir" != "x"; then
++ for try in $smart_try_dir; do
++ CFLAGS="$old_CFLAGS -I$try"
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++ #include <ldap.h>
++int
++main ()
++{
++ int a = 1;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_compile") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then
++ smart_include="-I$try"
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ smart_include=
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ if test "x$smart_include" != "x"; then
++ break;
++ fi
++ done
++ CFLAGS="$old_CFLAGS"
++fi
++
++if test "x$smart_include" = "x"; then
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++ #include <ldap.h>
++int
++main ()
++{
++ int a = 1;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++ (eval "$ac_compile") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then
++ smart_include=" "
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ smart_include=
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++
++if test "x$smart_include" = "x"; then
++
++
++if test "x$LOCATE" != "x"; then
++ DIRS=
++ file=ldap.h
++
++ for x in `${LOCATE} $file 2>/dev/null`; do
++ base=`echo $x | sed "s%/${file}%%"`
++ if test "x$x" = "x$base"; then
++ continue;
++ fi
++
++ dir=`${DIRNAME} $x 2>/dev/null`
++ exclude=`echo ${dir} | ${GREP} /home`
++ if test "x$exclude" != "x"; then
++ continue
++ fi
++
++ already=`echo \$smart_include_dir ${DIRS} | ${GREP} ${dir}`
++ if test "x$already" = "x"; then
++ DIRS="$DIRS $dir"
++ fi
++ done
++fi
++
++eval "smart_include_dir=\"\$smart_include_dir $DIRS\""
++
++
++ for try in $smart_include_dir /usr/local/include /opt/include; do
++ CFLAGS="$old_CFLAGS -I$try"
++ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+@@ -3434,20 +4067,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ smart_include="-I$try"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ smart_include=
+@@ -3462,14 +4096,14 @@ rm -f core conftest.err conftest.$ac_obj
+ fi
+
+ if test "x$smart_include" != "x"; then
+- { echo "$as_me:$LINENO: result: yes" >&5
+-echo "${ECHO_T}yes" >&6; }
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ eval "ac_cv_header_$ac_safe=yes"
+ CFLAGS="$old_CFLAGS $smart_include"
+ SMART_CFLAGS="$SMART_CFLAGS $smart_include"
+ else
+- { echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+ if test "$ac_cv_header_ldap_h" != "yes"; then
+@@ -3478,10 +4112,10 @@ fi
+
+
+ if test "x$fail" = "x"; then
+- { echo "$as_me:$LINENO: checking for ldap_start_tls_s" >&5
+-echo $ECHO_N "checking for ldap_start_tls_s... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking for ldap_start_tls_s" >&5
++$as_echo_n "checking for ldap_start_tls_s... " >&6; }
+ if test "${ac_cv_func_ldap_start_tls_s+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3534,39 +4168,43 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ ac_cv_func_ldap_start_tls_s=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func_ldap_start_tls_s=no
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_func_ldap_start_tls_s" >&5
+-echo "${ECHO_T}$ac_cv_func_ldap_start_tls_s" >&6; }
+-if test $ac_cv_func_ldap_start_tls_s = yes; then
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_ldap_start_tls_s" >&5
++$as_echo "$ac_cv_func_ldap_start_tls_s" >&6; }
++if test "x$ac_cv_func_ldap_start_tls_s" = x""yes; then
+ SMART_CFLAGS="$SMART_CFLAGS -DHAVE_LDAP_START_TLS"
+ fi
+
+- { echo "$as_me:$LINENO: checking for ldap_initialize" >&5
+-echo $ECHO_N "checking for ldap_initialize... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking for ldap_initialize" >&5
++$as_echo_n "checking for ldap_initialize... " >&6; }
+ if test "${ac_cv_func_ldap_initialize+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3619,39 +4257,43 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ ac_cv_func_ldap_initialize=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func_ldap_initialize=no
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_func_ldap_initialize" >&5
+-echo "${ECHO_T}$ac_cv_func_ldap_initialize" >&6; }
+-if test $ac_cv_func_ldap_initialize = yes; then
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_ldap_initialize" >&5
++$as_echo "$ac_cv_func_ldap_initialize" >&6; }
++if test "x$ac_cv_func_ldap_initialize" = x""yes; then
+ SMART_CFLAGS="$SMART_CFLAGS -DHAVE_LDAP_INITIALIZE"
+ fi
+
+- { echo "$as_me:$LINENO: checking for ldap_int_tls_config" >&5
+-echo $ECHO_N "checking for ldap_int_tls_config... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking for ldap_int_tls_config" >&5
++$as_echo_n "checking for ldap_int_tls_config... " >&6; }
+ if test "${ac_cv_func_ldap_int_tls_config+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3704,32 +4346,36 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ ac_cv_func_ldap_int_tls_config=yes
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func_ldap_int_tls_config=no
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_func_ldap_int_tls_config" >&5
+-echo "${ECHO_T}$ac_cv_func_ldap_int_tls_config" >&6; }
+-if test $ac_cv_func_ldap_int_tls_config = yes; then
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_ldap_int_tls_config" >&5
++$as_echo "$ac_cv_func_ldap_int_tls_config" >&6; }
++if test "x$ac_cv_func_ldap_int_tls_config" = x""yes; then
+ SMART_CFLAGS="$SMART_CFLAGS -DHAVE_LDAP_INT_TLS_CONFIG"
+ fi
+
+@@ -3738,11 +4384,11 @@ fi
+
+ for ac_func in ldap_set_rebind_proc
+ do
+-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
++as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
++$as_echo_n "checking for $ac_func... " >&6; }
+ if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3795,44 +4441,51 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext &&
+- $as_test_x conftest$ac_exeext; then
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then
+ eval "$as_ac_var=yes"
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_var=no"
+ fi
+
++rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-ac_res=`eval echo '${'$as_ac_var'}'`
+- { echo "$as_me:$LINENO: result: $ac_res" >&5
+-echo "${ECHO_T}$ac_res" >&6; }
+-if test `eval echo '${'$as_ac_var'}'` = yes; then
++ac_res=`eval 'as_val=${'$as_ac_var'}
++ $as_echo "$as_val"'`
++ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++as_val=`eval 'as_val=${'$as_ac_var'}
++ $as_echo "$as_val"'`
++ if test "x$as_val" = x""yes; then
+ cat >>confdefs.h <<_ACEOF
+-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+ _ACEOF
+
+ fi
+ done
+
+- { echo "$as_me:$LINENO: checking whether ldap_set_rebind_proc takes 3 arguments" >&5
+-echo $ECHO_N "checking whether ldap_set_rebind_proc takes 3 arguments... $ECHO_C" >&6; }
++ { $as_echo "$as_me:$LINENO: checking whether ldap_set_rebind_proc takes 3 arguments" >&5
++$as_echo_n "checking whether ldap_set_rebind_proc takes 3 arguments... " >&6; }
+ if test "${ac_cv_ldap_set_rebind_proc+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
++ $as_echo_n "(cached) " >&6
+ else
+
+ cat >conftest.$ac_ext <<_ACEOF
+@@ -3858,20 +4511,21 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_ldap_set_rebind_proc=3
+ else
+- echo "$as_me: failed program was:" >&5
++ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_ldap_set_rebind_proc=2
+@@ -3879,8 +4533,8 @@ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-{ echo "$as_me:$LINENO: result: $ac_cv_ldap_set_rebind_proc" >&5
+-echo "${ECHO_T}$ac_cv_ldap_set_rebind_proc" >&6; }
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_ldap_set_rebind_proc" >&5
++$as_echo "$ac_cv_ldap_set_rebind_proc" >&6; }
+ fi
+
+ targetname=rlm_ldap
+@@ -3891,21 +4545,21 @@ fi
+
+ if test x"$fail" != x""; then
+ if test x"${enable_strict_dependencies}" = x"yes"; then
+- { { echo "$as_me:$LINENO: error: set --without-rlm_ldap to disable it explicitly." >&5
+-echo "$as_me: error: set --without-rlm_ldap to disable it explicitly." >&2;}
++ { { $as_echo "$as_me:$LINENO: error: set --without-rlm_ldap to disable it explicitly." >&5
++$as_echo "$as_me: error: set --without-rlm_ldap to disable it explicitly." >&2;}
+ { (exit 1); exit 1; }; }
+ else
+- { echo "$as_me:$LINENO: WARNING: silently not building rlm_ldap." >&5
+-echo "$as_me: WARNING: silently not building rlm_ldap." >&2;}
+- { echo "$as_me:$LINENO: WARNING: FAILURE: rlm_ldap requires: $fail." >&5
+-echo "$as_me: WARNING: FAILURE: rlm_ldap requires: $fail." >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: silently not building rlm_ldap." >&5
++$as_echo "$as_me: WARNING: silently not building rlm_ldap." >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: FAILURE: rlm_ldap requires: $fail." >&5
++$as_echo "$as_me: WARNING: FAILURE: rlm_ldap requires: $fail." >&2;}
+ if test x"$headersuggestion" != x; then
+- { echo "$as_me:$LINENO: WARNING: $headersuggestion" >&5
+-echo "$as_me: WARNING: $headersuggestion" >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: $headersuggestion" >&5
++$as_echo "$as_me: WARNING: $headersuggestion" >&2;}
+ fi
+ if test x"$libsuggestion" != x; then
+- { echo "$as_me:$LINENO: WARNING: $libsuggestion" >&5
+-echo "$as_me: WARNING: $libsuggestion" >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: $libsuggestion" >&5
++$as_echo "$as_me: WARNING: $libsuggestion" >&2;}
+ fi
+ targetname=""
+ fi
+@@ -3966,11 +4620,12 @@ _ACEOF
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+@@ -4003,12 +4658,12 @@ echo "$as_me: WARNING: Cache variable $a
+ if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+-echo "$as_me: updating cache $cache_file" >&6;}
++ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
++$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
++ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+ fi
+ rm -f confcache
+@@ -4025,6 +4680,12 @@ test "x$exec_prefix" = xNONE && exec_pre
+ # take arguments), then branch to the quote section. Otherwise,
+ # look for a macro that doesn't take arguments.
+ ac_script='
++:mline
++/\\$/{
++ N
++ s,\\\n,,
++ b mline
++}
+ t clear
+ :clear
+ s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+@@ -4054,7 +4715,7 @@ ac_ltlibobjs=
+ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+- ac_i=`echo "$ac_i" | sed "$ac_script"`
++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+@@ -4067,11 +4728,12 @@ LTLIBOBJS=$ac_ltlibobjs
+
+
+ : ${CONFIG_STATUS=./config.status}
++ac_write_fail=0
+ ac_clean_files_save=$ac_clean_files
+ ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+-echo "$as_me: creating $CONFIG_STATUS" >&6;}
+-cat >$CONFIG_STATUS <<_ACEOF
++{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ #! $SHELL
+ # Generated by $as_me.
+ # Run this file to recreate the current configuration.
+@@ -4084,7 +4746,7 @@ ac_cs_silent=false
+ SHELL=\${CONFIG_SHELL-$SHELL}
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ ## --------------------- ##
+ ## M4sh Initialization. ##
+ ## --------------------- ##
+@@ -4094,7 +4756,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -4116,17 +4778,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
+ as_cr_digits='0123456789'
+ as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+-# The user is always right.
+-if test "${PATH_SEPARATOR+set}" != set; then
+- echo "#! /bin/sh" >conf$$.sh
+- echo "exit 0" >>conf$$.sh
+- chmod +x conf$$.sh
+- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+- PATH_SEPARATOR=';'
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
+ else
+- PATH_SEPARATOR=:
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+- rm -f conf$$.sh
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
+ fi
+
+ # Support unset when possible.
+@@ -4142,8 +4832,6 @@ fi
+ # there to prevent editors from complaining about space-tab.
+ # (If _AS_PATH_WALK were called with IFS unset, it would disable word
+ # splitting by setting IFS to empty value.)
+-as_nl='
+-'
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+@@ -4166,7 +4854,7 @@ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+ fi
+
+@@ -4179,17 +4867,10 @@ PS2='> '
+ PS4='+ '
+
+ # NLS nuisances.
+-for as_var in \
+- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+- LC_TELEPHONE LC_TIME
+-do
+- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+- eval $as_var=C; export $as_var
+- else
+- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+- fi
+-done
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
+
+ # Required to use basename.
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+@@ -4211,7 +4892,7 @@ as_me=`$as_basename -- "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-echo X/"$0" |
++$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+@@ -4262,7 +4943,7 @@ $as_unset CDPATH
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+@@ -4290,7 +4971,6 @@ case `echo -n x` in
+ *)
+ ECHO_N='-n';;
+ esac
+-
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+@@ -4303,19 +4983,22 @@ if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+ else
+ rm -f conf$$.dir
+- mkdir conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
+ fi
+-echo >conf$$.file
+-if ln -s conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s='ln -s'
+- # ... but there are two gotchas:
+- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+- # In both cases, we have to default to `cp -p'.
+- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
+ as_ln_s='cp -p'
+-elif ln conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s=ln
++ fi
+ else
+ as_ln_s='cp -p'
+ fi
+@@ -4340,10 +5023,10 @@ else
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+- test -d "$1/.";
++ test -d "$1/.";
+ else
+ case $1 in
+- -*)set "./$1";;
++ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+@@ -4366,7 +5049,7 @@ exec 6>&1
+ # values after options handling.
+ ac_log="
+ This file was extended by $as_me, which was
+-generated by GNU Autoconf 2.61. Invocation command line was
++generated by GNU Autoconf 2.63. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+@@ -4379,26 +5062,33 @@ on `(hostname || uname -n) 2>/dev/null |
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<_ACEOF
++case $ac_config_files in *"
++"*) set x $ac_config_files; shift; ac_config_files=$*;;
++esac
++
++
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ # Files that config.status was made for.
+ config_files="$ac_config_files"
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ ac_cs_usage="\
+ \`$as_me' instantiates files from templates according to the
+ current configuration.
+
+-Usage: $0 [OPTIONS] [FILE]...
++Usage: $0 [OPTION]... [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+- -q, --quiet do not print progress messages
++ -q, --quiet, --silent
++ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+- --file=FILE[:TEMPLATE]
+- instantiate the configuration file FILE
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
+
+ Configuration files:
+ $config_files
+@@ -4406,23 +5096,23 @@ $config_files
+ Report bugs to <bug-autoconf@gnu.org>."
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_cs_version="\\
+ config.status
+-configured by $0, generated by GNU Autoconf 2.61,
+- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
++configured by $0, generated by GNU Autoconf 2.63,
++ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+-Copyright (C) 2006 Free Software Foundation, Inc.
++Copyright (C) 2008 Free Software Foundation, Inc.
+ This config.status script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it."
+
+ ac_pwd='$ac_pwd'
+ srcdir='$srcdir'
++test -n "\$AWK" || AWK=awk
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
+-# If no file are specified by the user, then we need to provide default
+-# value. By we need to know if files were specified by the user.
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# The default lists apply if the user does not specify any file.
+ ac_need_defaults=:
+ while test $# != 0
+ do
+@@ -4444,21 +5134,24 @@ do
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+- echo "$ac_cs_version"; exit ;;
++ $as_echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+- echo "$ac_cs_usage"; exit ;;
++ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+- -*) { echo "$as_me: error: unrecognized option: $1
++ -*) { $as_echo "$as_me: error: unrecognized option: $1
+ Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+@@ -4477,30 +5170,32 @@ if $ac_cs_silent; then
+ fi
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ if \$ac_cs_recheck; then
+- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+- CONFIG_SHELL=$SHELL
++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++ shift
++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
++ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++ exec "\$@"
+ fi
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ exec 5>>config.log
+ {
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+ ## Running $as_me. ##
+ _ASBOX
+- echo "$ac_log"
++ $as_echo "$ac_log"
+ } >&5
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+ # Handling of arguments.
+ for ac_config_target in $ac_config_targets
+@@ -4508,8 +5203,8 @@ do
+ case $ac_config_target in
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
++$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ done
+@@ -4548,114 +5243,143 @@ $debug ||
+ (umask 077 && mkdir "$tmp")
+ } ||
+ {
+- echo "$me: cannot create a temporary directory in ." >&2
++ $as_echo "$as_me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+ }
+
+-#
+-# Set up the sed scripts for CONFIG_FILES section.
+-#
+-
+-# No need to generate the scripts if there are no CONFIG_FILES.
+-# This happens for instance when ./config.status config.h
++# Set up the scripts for CONFIG_FILES section.
++# No need to generate them if there are no CONFIG_FILES.
++# This happens for instance with `./config.status config.h'.
+ if test -n "$CONFIG_FILES"; then
+
+-_ACEOF
+
++ac_cr='\r'
++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
++ ac_cs_awk_cr='\\r'
++else
++ ac_cs_awk_cr=$ac_cr
++fi
++
++echo 'BEGIN {' >"$tmp/subs1.awk" &&
++_ACEOF
+
+
++{
++ echo "cat >conf$$subs.awk <<_ACEOF" &&
++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
++ echo "_ACEOF"
++} >conf$$subs.sh ||
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
++ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ ac_delim='%!_!# '
+ for ac_last_try in false false false false false :; do
+- cat >conf$$subs.sed <<_ACEOF
+-SHELL!$SHELL$ac_delim
+-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+-exec_prefix!$exec_prefix$ac_delim
+-prefix!$prefix$ac_delim
+-program_transform_name!$program_transform_name$ac_delim
+-bindir!$bindir$ac_delim
+-sbindir!$sbindir$ac_delim
+-libexecdir!$libexecdir$ac_delim
+-datarootdir!$datarootdir$ac_delim
+-datadir!$datadir$ac_delim
+-sysconfdir!$sysconfdir$ac_delim
+-sharedstatedir!$sharedstatedir$ac_delim
+-localstatedir!$localstatedir$ac_delim
+-includedir!$includedir$ac_delim
+-oldincludedir!$oldincludedir$ac_delim
+-docdir!$docdir$ac_delim
+-infodir!$infodir$ac_delim
+-htmldir!$htmldir$ac_delim
+-dvidir!$dvidir$ac_delim
+-pdfdir!$pdfdir$ac_delim
+-psdir!$psdir$ac_delim
+-libdir!$libdir$ac_delim
+-localedir!$localedir$ac_delim
+-mandir!$mandir$ac_delim
+-DEFS!$DEFS$ac_delim
+-ECHO_C!$ECHO_C$ac_delim
+-ECHO_N!$ECHO_N$ac_delim
+-ECHO_T!$ECHO_T$ac_delim
+-LIBS!$LIBS$ac_delim
+-build_alias!$build_alias$ac_delim
+-host_alias!$host_alias$ac_delim
+-target_alias!$target_alias$ac_delim
+-CC!$CC$ac_delim
+-CFLAGS!$CFLAGS$ac_delim
+-LDFLAGS!$LDFLAGS$ac_delim
+-CPPFLAGS!$CPPFLAGS$ac_delim
+-ac_ct_CC!$ac_ct_CC$ac_delim
+-EXEEXT!$EXEEXT$ac_delim
+-OBJEXT!$OBJEXT$ac_delim
+-edir!$edir$ac_delim
+-ldap_ldflags!$ldap_ldflags$ac_delim
+-ldap_cflags!$ldap_cflags$ac_delim
+-targetname!$targetname$ac_delim
+-LIBOBJS!$LIBOBJS$ac_delim
+-LTLIBOBJS!$LTLIBOBJS$ac_delim
+-_ACEOF
++ . ./conf$$subs.sh ||
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
+
+- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 50; then
++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
++ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+ done
++rm -f conf$$subs.sh
+
+-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+-if test -n "$ac_eof"; then
+- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+- ac_eof=`expr $ac_eof + 1`
+-fi
+-
+-cat >>$CONFIG_STATUS <<_ACEOF
+-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+-_ACEOF
+-sed '
+-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+-s/^/s,@/; s/!/@,|#_!!_#|/
+-:n
+-t n
+-s/'"$ac_delim"'$/,g/; t
+-s/$/\\/; p
+-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+-' >>$CONFIG_STATUS <conf$$subs.sed
+-rm -f conf$$subs.sed
+-cat >>$CONFIG_STATUS <<_ACEOF
+-:end
+-s/|#_!!_#|//g
+-CEOF$ac_eof
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+ _ACEOF
++sed -n '
++h
++s/^/S["/; s/!.*/"]=/
++p
++g
++s/^[^!]*!//
++:repl
++t repl
++s/'"$ac_delim"'$//
++t delim
++:nl
++h
++s/\(.\{148\}\).*/\1/
++t more1
++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
++p
++n
++b repl
++:more1
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t nl
++:delim
++h
++s/\(.\{148\}\).*/\1/
++t more2
++s/["\\]/\\&/g; s/^/"/; s/$/"/
++p
++b
++:more2
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t delim
++' <conf$$subs.awk | sed '
++/^[^""]/{
++ N
++ s/\n//
++}
++' >>$CONFIG_STATUS || ac_write_fail=1
++rm -f conf$$subs.awk
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++_ACAWK
++cat >>"\$tmp/subs1.awk" <<_ACAWK &&
++ for (key in S) S_is_set[key] = 1
++ FS = "\a"
+
++}
++{
++ line = $ 0
++ nfields = split(line, field, "@")
++ substed = 0
++ len = length(field[1])
++ for (i = 2; i < nfields; i++) {
++ key = field[i]
++ keylen = length(key)
++ if (S_is_set[key]) {
++ value = S[key]
++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
++ len += length(value) + length(field[++i])
++ substed = 1
++ } else
++ len += 1 + keylen
++ }
++
++ print line
++}
++
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
++else
++ cat
++fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
++ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
++$as_echo "$as_me: error: could not setup config files machinery" >&2;}
++ { (exit 1); exit 1; }; }
++_ACEOF
+
+ # VPATH may cause trouble with some makes, so we remove $(srcdir),
+ # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+@@ -4672,19 +5396,21 @@ s/^[^=]*=[ ]*$//
+ }'
+ fi
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ fi # test -n "$CONFIG_FILES"
+
+
+-for ac_tag in :F $CONFIG_FILES
++eval set X " :F $CONFIG_FILES "
++shift
++for ac_tag
+ do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
++ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
++$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+@@ -4713,26 +5439,38 @@ echo "$as_me: error: Invalid tag $ac_tag
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
++$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+- ac_file_inputs="$ac_file_inputs $ac_f"
++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
++ ac_file_inputs="$ac_file_inputs '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+- configure_input="Generated from "`IFS=:
+- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
++ configure_input='Generated from '`
++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
++ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+- { echo "$as_me:$LINENO: creating $ac_file" >&5
+-echo "$as_me: creating $ac_file" >&6;}
++ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
++$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
++ # Neutralize special characters interpreted by sed in replacement strings.
++ case $configure_input in #(
++ *\&* | *\|* | *\\* )
++ ac_sed_conf_input=`$as_echo "$configure_input" |
++ sed 's/[\\\\&|]/\\\\&/g'`;; #(
++ *) ac_sed_conf_input=$configure_input;;
++ esac
+
+ case $ac_tag in
+- *:-:* | *:-) cat >"$tmp/stdin";;
++ *:-:* | *:-) cat >"$tmp/stdin" \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; } ;;
+ esac
+ ;;
+ esac
+@@ -4742,7 +5480,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+-echo X"$ac_file" |
++$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -4768,7 +5506,7 @@ echo X"$ac_file" |
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+@@ -4777,7 +5515,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+-echo X"$as_dir" |
++$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -4798,17 +5536,17 @@ echo X"$as_dir" |
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+-echo "$as_me: error: cannot create directory $as_dir" >&2;}
++ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
++$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+ case "$ac_dir" in
+ .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *)
+- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+@@ -4844,12 +5582,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ # If the template does not know about datarootdir, expand it.
+ # FIXME: This hack should be removed a few years after 2.60.
+ ac_datarootdir_hack=; ac_datarootdir_seen=
+
+-case `sed -n '/datarootdir/ {
++ac_sed_dataroot='
++/datarootdir/ {
+ p
+ q
+ }
+@@ -4858,13 +5597,14 @@ case `sed -n '/datarootdir/ {
+ /@infodir@/p
+ /@localedir@/p
+ /@mandir@/p
+-' $ac_file_inputs` in
++'
++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+ *datarootdir*) ac_datarootdir_seen=yes;;
+ *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+@@ -4878,15 +5618,16 @@ _ACEOF
+ # Neutralize VPATH when `$srcdir' = `.'.
+ # Shell code in configure.ac might set extrasub.
+ # FIXME: do we really want to maintain this feature?
+-cat >>$CONFIG_STATUS <<_ACEOF
+- sed "$ac_vpsub
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_sed_extra="$ac_vpsub
+ $extrasub
+ _ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ :t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+-s&@configure_input@&$configure_input&;t t
++s|@configure_input@|$ac_sed_conf_input|;t t
+ s&@top_builddir@&$ac_top_builddir_sub&;t t
++s&@top_build_prefix@&$ac_top_build_prefix&;t t
+ s&@srcdir@&$ac_srcdir&;t t
+ s&@abs_srcdir@&$ac_abs_srcdir&;t t
+ s&@top_srcdir@&$ac_top_srcdir&;t t
+@@ -4895,21 +5636,28 @@ s&@builddir@&$ac_builddir&;t t
+ s&@abs_builddir@&$ac_abs_builddir&;t t
+ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+ $ac_datarootdir_hack
+-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
++"
++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; }
+
+ test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&5
+-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+- -) cat "$tmp/out"; rm -f "$tmp/out";;
+- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+- esac
++ -) cat "$tmp/out" && rm -f "$tmp/out";;
++ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
++ esac \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; }
+ ;;
+
+
+@@ -4924,6 +5672,11 @@ _ACEOF
+ chmod +x $CONFIG_STATUS
+ ac_clean_files=$ac_clean_files_save
+
++test $ac_write_fail = 0 ||
++ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
++
+
+ # configure is writing to config.log, and then calls config.status.
+ # config.status does its own redirection, appending to config.log.
+@@ -4945,5 +5698,9 @@ if test "$no_create" != yes; then
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+ fi
++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
++ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
++fi
+
+
+--- a/src/modules/rlm_ldap/configure.in
++++ b/src/modules/rlm_ldap/configure.in
+@@ -87,6 +87,9 @@ if test x$with_[]modname != xno; then
+ )
+ fi
+
++ FR_SMART_CHECK_LIB(sasl, sasl_encode)
++ FR_SMART_CHECK_LIB(lber, ber_init)
++
+ dnl Try only "-lldap_r" or "-lldap"
+ dnl Static linking will probably not work, but nobody ever
+ dnl complained about it.