ar71xx: add preliminary support for 3.3
authorGabor Juhos <juhosg@openwrt.org>
Fri, 10 Feb 2012 11:53:56 +0000 (11:53 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Fri, 10 Feb 2012 11:53:56 +0000 (11:53 +0000)
SVN-Revision: 30410

97 files changed:
target/linux/ar71xx/config-3.3 [new file with mode: 0644]
target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch [new file with mode: 0644]

diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3
new file mode 100644 (file)
index 0000000..8788789
--- /dev/null
@@ -0,0 +1,228 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_AP113=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP81=y
+CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PB92=y
+CONFIG_ATH79_MACH_RB4XX=y
+CONFIG_ATH79_MACH_RB750=y
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WNDR3700=y
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+# CONFIG_ATH79_WDT is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LANTIQ is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_RB750 is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_RB4XX is not set
+# CONFIG_SPI_RB4XX_CPLD is not set
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
new file mode 100644 (file)
index 0000000..b41eb54
--- /dev/null
@@ -0,0 +1,294 @@
+/*
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This driver was base on: net/dsa/mv88e6060.c
+ *   net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
+ *   Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+
+#define REG_BASE               0x10
+#define REG_PHY(p)             (REG_BASE + (p))
+#define REG_PORT(p)            (REG_BASE + 8 + (p))
+#define REG_GLOBAL             (REG_BASE + 0x0f)
+#define NUM_PORTS              7
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+       return mdiobus_read(ds->master_mii_bus, addr, reg);
+}
+
+#define REG_READ(addr, reg)                                    \
+       ({                                                      \
+               int __ret;                                      \
+                                                               \
+               __ret = reg_read(ds, addr, reg);                \
+               if (__ret < 0)                                  \
+                       return __ret;                           \
+               __ret;                                          \
+       })
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+       return mdiobus_write(ds->master_mii_bus, addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val)                              \
+       ({                                                      \
+               int __ret;                                      \
+                                                               \
+               __ret = reg_write(ds, addr, reg, val);          \
+               if (__ret < 0)                                  \
+                       return __ret;                           \
+       })
+
+static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
+{
+       int ret;
+
+       ret = mdiobus_read(bus, REG_PORT(0), 0x03);
+       if (ret >= 0) {
+               ret &= 0xfff0;
+               if (ret == 0x1530)
+                       return "Marvell 88E6063";
+       }
+
+       return NULL;
+}
+
+static int mv88e6063_switch_reset(struct dsa_switch *ds)
+{
+       int i;
+       int ret;
+
+       /*
+        * Set all ports to the disabled state.
+        */
+       for (i = 0; i < NUM_PORTS; i++) {
+               ret = REG_READ(REG_PORT(i), 0x04);
+               REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+       }
+
+       /*
+        * Wait for transmit queues to drain.
+        */
+       msleep(2);
+
+       /*
+        * Reset the switch.
+        */
+       REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+       /*
+        * Wait up to one second for reset to complete.
+        */
+       for (i = 0; i < 1000; i++) {
+               ret = REG_READ(REG_GLOBAL, 0x00);
+               if ((ret & 0x8000) == 0x0000)
+                       break;
+
+               msleep(1);
+       }
+       if (i == 1000)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int mv88e6063_setup_global(struct dsa_switch *ds)
+{
+       /*
+        * Disable discarding of frames with excessive collisions,
+        * set the maximum frame size to 1536 bytes, and mask all
+        * interrupt sources.
+        */
+       REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+       /*
+        * Enable automatic address learning, set the address
+        * database size to 1024 entries, and set the default aging
+        * time to 5 minutes.
+        */
+       REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+       return 0;
+}
+
+static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
+{
+       int addr = REG_PORT(p);
+
+       /*
+        * Do not force flow control, disable Ingress and Egress
+        * Header tagging, disable VLAN tunneling, and set the port
+        * state to Forwarding.  Additionally, if this is the CPU
+        * port, enable Ingress and Egress Trailer tagging mode.
+        */
+       REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
+
+       /*
+        * Port based VLAN map: give each port its own address
+        * database, allow the CPU port to talk to each of the 'real'
+        * ports, and allow each of the 'real' ports to only talk to
+        * the CPU port.
+        */
+       REG_WRITE(addr, 0x06,
+                       ((p & 0xf) << 12) |
+                        (dsa_is_cpu_port(ds, p) ?
+                               ds->phys_port_mask :
+                               (1 << ds->dst->cpu_port)));
+
+       /*
+        * Port Association Vector: when learning source addresses
+        * of packets, add the address to the address database using
+        * a port bitmap that has only the bit for this port set and
+        * the other bits clear.
+        */
+       REG_WRITE(addr, 0x0b, 1 << p);
+
+       return 0;
+}
+
+static int mv88e6063_setup(struct dsa_switch *ds)
+{
+       int i;
+       int ret;
+
+       ret = mv88e6063_switch_reset(ds);
+       if (ret < 0)
+               return ret;
+
+       /* @@@ initialise atu */
+
+       ret = mv88e6063_setup_global(ds);
+       if (ret < 0)
+               return ret;
+
+       for (i = 0; i < NUM_PORTS; i++) {
+               ret = mv88e6063_setup_port(ds, i);
+               if (ret < 0)
+                       return ret;
+       }
+
+       return 0;
+}
+
+static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+       REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+       REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+       REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+       return 0;
+}
+
+static int mv88e6063_port_to_phy_addr(int port)
+{
+       if (port >= 0 && port <= NUM_PORTS)
+               return REG_PHY(port);
+       return -1;
+}
+
+static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+       int addr;
+
+       addr = mv88e6063_port_to_phy_addr(port);
+       if (addr == -1)
+               return 0xffff;
+
+       return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+       int addr;
+
+       addr = mv88e6063_port_to_phy_addr(port);
+       if (addr == -1)
+               return 0xffff;
+
+       return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6063_poll_link(struct dsa_switch *ds)
+{
+       int i;
+
+       for (i = 0; i < DSA_MAX_PORTS; i++) {
+               struct net_device *dev;
+               int uninitialized_var(port_status);
+               int link;
+               int speed;
+               int duplex;
+               int fc;
+
+               dev = ds->ports[i];
+               if (dev == NULL)
+                       continue;
+
+               link = 0;
+               if (dev->flags & IFF_UP) {
+                       port_status = reg_read(ds, REG_PORT(i), 0x00);
+                       if (port_status < 0)
+                               continue;
+
+                       link = !!(port_status & 0x1000);
+               }
+
+               if (!link) {
+                       if (netif_carrier_ok(dev)) {
+                               printk(KERN_INFO "%s: link down\n", dev->name);
+                               netif_carrier_off(dev);
+                       }
+                       continue;
+               }
+
+               speed = (port_status & 0x0100) ? 100 : 10;
+               duplex = (port_status & 0x0200) ? 1 : 0;
+               fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+               if (!netif_carrier_ok(dev)) {
+                       printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+                                        "flow control %sabled\n", dev->name,
+                                        speed, duplex ? "full" : "half",
+                                        fc ? "en" : "dis");
+                       netif_carrier_on(dev);
+               }
+       }
+}
+
+static struct dsa_switch_driver mv88e6063_switch_driver = {
+       .tag_protocol   = htons(ETH_P_TRAILER),
+       .probe          = mv88e6063_probe,
+       .setup          = mv88e6063_setup,
+       .set_addr       = mv88e6063_set_addr,
+       .phy_read       = mv88e6063_phy_read,
+       .phy_write      = mv88e6063_phy_write,
+       .poll_link      = mv88e6063_poll_link,
+};
+
+static int __init mv88e6063_init(void)
+{
+       register_switch_driver(&mv88e6063_switch_driver);
+       return 0;
+}
+module_init(mv88e6063_init);
+
+static void __exit mv88e6063_cleanup(void)
+{
+       unregister_switch_driver(&mv88e6063_switch_driver);
+}
+module_exit(mv88e6063_cleanup);
diff --git a/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch
new file mode 100644 (file)
index 0000000..df6e3e1
--- /dev/null
@@ -0,0 +1,24 @@
+From cf6855546330c3d349d41496975f32255bb6fd07 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:02:57 +0100
+Subject: [PATCH 01/35] MIPS: ath79: avoid a kernel bug on AR913X
+
+Wireless mac registration causes a BUG on AR913X SoCs due to
+a missing 'else'.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/dev-wmac.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_
+ {
+       if (soc_is_ar913x())
+               ar913x_wmac_setup();
+-      if (soc_is_ar933x())
++      else if (soc_is_ar933x())
+               ar933x_wmac_setup();
+       else
+               BUG();
diff --git a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch
new file mode 100644 (file)
index 0000000..547f4fb
--- /dev/null
@@ -0,0 +1,151 @@
+From c98b48027516a2e71688a5957e4e0120f4aa8c61 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 09:47:44 +0100
+Subject: [PATCH 02/35] MIPS: ath79: separate common PCI code
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The 'pcibios_map_irq' and 'pcibios_plat_dev_init'
+are common functions and only instance one of them
+can be present in a single kernel.
+
+Currently these functions can be built only if the
+CONFIG_SOC_AR724X option is selected. However the
+ath79 platform contain support for the AR71XX SoCs,.
+The AR71XX SoCs have a differnet PCI controller,
+and those will require a different code.
+
+Move the common PCI code into a separeate file in
+order to be able to use that with other SoCs as
+well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/ath79/Makefile    |    1 +
+ arch/mips/ath79/pci.c       |   46 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c |   34 -------------------------------
+ 3 files changed, 47 insertions(+), 34 deletions(-)
+ create mode 100644 arch/mips/ath79/pci.c
+
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -11,6 +11,7 @@
+ obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
+ obj-$(CONFIG_EARLY_PRINTK)            += early_printk.o
++obj-$(CONFIG_PCI)                     += pci.o
+ #
+ # Devices
+--- /dev/null
++++ b/arch/mips/ath79/pci.c
+@@ -0,0 +1,46 @@
++/*
++ *  Atheros AR71XX/AR724X specific PCI setup code
++ *
++ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <asm/mach-ath79/pci-ath724x.h>
++
++static struct ath724x_pci_data *pci_data;
++static int pci_data_size;
++
++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
++{
++      pci_data        = data;
++      pci_data_size   = size;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
++{
++      unsigned int devfn = dev->devfn;
++      int irq = -1;
++
++      if (devfn > pci_data_size - 1)
++              return irq;
++
++      irq = pci_data[devfn].irq;
++
++      return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++      unsigned int devfn = dev->devfn;
++
++      if (devfn > pci_data_size - 1)
++              return PCIBIOS_DEVICE_NOT_FOUND;
++
++      dev->dev.platform_data = pci_data[devfn].pdata;
++
++      return PCIBIOS_SUCCESSFUL;
++}
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -9,7 +9,6 @@
+  */
+ #include <linux/pci.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
+ #define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+@@ -19,8 +18,6 @@
+ #define ATH724X_PCI_MEM_SIZE  0x08000000
+ static DEFINE_SPINLOCK(ath724x_pci_lock);
+-static struct ath724x_pci_data *pci_data;
+-static int pci_data_size;
+ static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *value)
+@@ -133,37 +130,6 @@ static struct pci_controller ath724x_pci
+       .mem_resource   = &ath724x_mem_resource,
+ };
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+-{
+-      pci_data        = data;
+-      pci_data_size   = size;
+-}
+-
+-int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+-{
+-      unsigned int devfn = dev->devfn;
+-      int irq = -1;
+-
+-      if (devfn > pci_data_size - 1)
+-              return irq;
+-
+-      irq = pci_data[devfn].irq;
+-
+-      return irq;
+-}
+-
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+-      unsigned int devfn = dev->devfn;
+-
+-      if (devfn > pci_data_size - 1)
+-              return PCIBIOS_DEVICE_NOT_FOUND;
+-
+-      dev->dev.platform_data = pci_data[devfn].pdata;
+-
+-      return PCIBIOS_SUCCESSFUL;
+-}
+-
+ static int __init ath724x_pcibios_init(void)
+ {
+       register_pci_controller(&ath724x_pci_controller);
diff --git a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch
new file mode 100644 (file)
index 0000000..a5c25b1
--- /dev/null
@@ -0,0 +1,103 @@
+From 204fd70abd99099f6c2e2213a2baa1d51c03a039 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 09:50:50 +0100
+Subject: [PATCH 03/35] MIPS: ath79: rename pci-ath724x.h
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The declared function in this header file is used by the
+ath79 platform code only. Move the header to the platform
+directory.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - move include "pci.h" out of the #ifdef CONFIG_PCI section
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c                 |    2 +-
+ arch/mips/ath79/pci.c                          |    2 +-
+ arch/mips/ath79/pci.h                          |   21 +++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/pci-ath724x.h |   21 ---------------------
+ 4 files changed, 23 insertions(+), 23 deletions(-)
+ create mode 100644 arch/mips/ath79/pci.h
+ delete mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -15,13 +15,13 @@
+ #ifdef CONFIG_PCI
+ #include <linux/ath9k_platform.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
+ #endif /* CONFIG_PCI */
+ #include "machtypes.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
++#include "pci.h"
+ #define UBNT_XM_GPIO_LED_L1           0
+ #define UBNT_XM_GPIO_LED_L2           1
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -9,7 +9,7 @@
+  */
+ #include <linux/pci.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
++#include "pci.h"
+ static struct ath724x_pci_data *pci_data;
+ static int pci_data_size;
+--- /dev/null
++++ b/arch/mips/ath79/pci.h
+@@ -0,0 +1,21 @@
++/*
++ *  Atheros 724x PCI support
++ *
++ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
++#define __ASM_MACH_ATH79_PCI_ATH724X_H
++
++struct ath724x_pci_data {
++      int irq;
++      void *pdata;
++};
++
++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
++
++#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+--- a/arch/mips/include/asm/mach-ath79/pci-ath724x.h
++++ /dev/null
+@@ -1,21 +0,0 @@
+-/*
+- *  Atheros 724x PCI support
+- *
+- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- *
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- */
+-
+-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+-#define __ASM_MACH_ATH79_PCI_ATH724X_H
+-
+-struct ath724x_pci_data {
+-      int irq;
+-      void *pdata;
+-};
+-
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+-
+-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
diff --git a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
new file mode 100644 (file)
index 0000000..42fa5c8
--- /dev/null
@@ -0,0 +1,62 @@
+From 7e59b95e3424c078de0d75d699433da0dd289fc1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 10:13:37 +0100
+Subject: [PATCH 04/35] MIPS: ath79: make ath724x_pcibios_init visible for external code
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René Bolldorf <xsecute@googlemail.com>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v4: - add a sob tag
+v3: - no changes
+v2: - fix a typo in my e-mail address
+---
+ arch/mips/include/asm/mach-ath79/pci.h |   20 ++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c            |    3 ++-
+ 2 files changed, 22 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-ath79/pci.h
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -0,0 +1,20 @@
++/*
++ *  Atheros 724x PCI support
++ *
++ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PCI_H
++#define __ASM_MACH_ATH79_PCI_H
++
++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
++int ath724x_pcibios_init(void);
++#else
++static inline int ath724x_pcibios_init(void) { return 0 };
++#endif
++
++#endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -9,6 +9,7 @@
+  */
+ #include <linux/pci.h>
++#include <asm/mach-ath79/pci.h>
+ #define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+@@ -130,7 +131,7 @@ static struct pci_controller ath724x_pci
+       .mem_resource   = &ath724x_mem_resource,
+ };
+-static int __init ath724x_pcibios_init(void)
++int __init ath724x_pcibios_init(void)
+ {
+       register_pci_controller(&ath724x_pci_controller);
diff --git a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch
new file mode 100644 (file)
index 0000000..1b52f25
--- /dev/null
@@ -0,0 +1,80 @@
+From fbf38a9b03d0c47ed602f090ebb2d8ecc0d51d04 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 10:25:26 +0100
+Subject: [PATCH 05/35] MIPS: ath79: add a common PCI registration function
+
+The current code unconditionally registers the AR724X
+specific PCI controller, even if the kernel is running
+on a different SoC.
+
+Add a common function for PCI controller registration,
+and only register the AR724X PCI controller if the kernel
+is running on an AR724X SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v4: - simplify ath79_register_pci function
+v3: - fix compile error if CONFIG_PCI is not defined
+    - add __init annotation to ath79_register_pci
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c |    1 +
+ arch/mips/ath79/pci.c          |   10 ++++++++++
+ arch/mips/ath79/pci.h          |    6 ++++++
+ arch/mips/pci/pci-ath724x.c    |    2 --
+ 4 files changed, 17 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -111,6 +111,7 @@ static void __init ubnt_xm_init(void)
+       ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ #endif /* CONFIG_PCI */
++      ath79_register_pci();
+ }
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -9,6 +9,8 @@
+  */
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+ static struct ath724x_pci_data *pci_data;
+@@ -44,3 +46,11 @@ int pcibios_plat_dev_init(struct pci_dev
+       return PCIBIOS_SUCCESSFUL;
+ }
++
++int __init ath79_register_pci(void)
++{
++      if (soc_is_ar724x())
++              return ath724x_pcibios_init();
++
++      return -ENODEV;
++}
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -18,4 +18,10 @@ struct ath724x_pci_data {
+ void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
++#ifdef CONFIG_PCI
++int ath79_register_pci(void);
++#else
++static inline int ath79_register_pci(void) { return 0; }
++#endif
++
+ #endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -137,5 +137,3 @@ int __init ath724x_pcibios_init(void)
+       return PCIBIOS_SUCCESSFUL;
+ }
+-
+-arch_initcall(ath724x_pcibios_init);
diff --git a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
new file mode 100644 (file)
index 0000000..55adff0
--- /dev/null
@@ -0,0 +1,318 @@
+From 9510a9988638ae2386277a832fab2df8ca37d75a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:07:26 +0100
+Subject: [PATCH 06/35] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v4: - no changes
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/pci/Makefile      |    2 +-
+ arch/mips/pci/pci-ar724x.c  |  139 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c |  139 -------------------------------------------
+ 3 files changed, 140 insertions(+), 140 deletions(-)
+ create mode 100644 arch/mips/pci/pci-ar724x.c
+ delete mode 100644 arch/mips/pci/pci-ath724x.c
+
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM47XX)                += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
+                                       ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
+-obj-$(CONFIG_SOC_AR724X)      += pci-ath724x.o
++obj-$(CONFIG_SOC_AR724X)      += pci-ar724x.o
+ #
+ # These are still pretty much in the old state, watch, go blind.
+--- /dev/null
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -0,0 +1,139 @@
++/*
++ *  Atheros 724x PCI support
++ *
++ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <asm/mach-ath79/pci.h>
++
++#define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
++#define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
++
++#define ATH724X_PCI_DEV_BASE  0x14000000
++#define ATH724X_PCI_MEM_BASE  0x10000000
++#define ATH724X_PCI_MEM_SIZE  0x08000000
++
++static DEFINE_SPINLOCK(ath724x_pci_lock);
++
++static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++                          int size, uint32_t *value)
++{
++      unsigned long flags, addr, tval, mask;
++
++      if (devfn)
++              return PCIBIOS_DEVICE_NOT_FOUND;
++
++      if (where & (size - 1))
++              return PCIBIOS_BAD_REGISTER_NUMBER;
++
++      spin_lock_irqsave(&ath724x_pci_lock, flags);
++
++      switch (size) {
++      case 1:
++              addr = where & ~3;
++              mask = 0xff000000 >> ((where % 4) * 8);
++              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++              tval = tval & ~mask;
++              *value = (tval >> ((4 - (where % 4))*8));
++              break;
++      case 2:
++              addr = where & ~3;
++              mask = 0xffff0000 >> ((where % 4)*8);
++              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++              tval = tval & ~mask;
++              *value = (tval >> ((4 - (where % 4))*8));
++              break;
++      case 4:
++              *value = reg_read(ATH724X_PCI_DEV_BASE + where);
++              break;
++      default:
++              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++              return PCIBIOS_BAD_REGISTER_NUMBER;
++      }
++
++      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++      return PCIBIOS_SUCCESSFUL;
++}
++
++static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
++                           int size, uint32_t value)
++{
++      unsigned long flags, tval, addr, mask;
++
++      if (devfn)
++              return PCIBIOS_DEVICE_NOT_FOUND;
++
++      if (where & (size - 1))
++              return PCIBIOS_BAD_REGISTER_NUMBER;
++
++      spin_lock_irqsave(&ath724x_pci_lock, flags);
++
++      switch (size) {
++      case 1:
++              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++              mask = 0xff000000 >> ((where % 4)*8);
++              tval = reg_read(addr);
++              tval = tval & ~mask;
++              tval |= (value << ((4 - (where % 4))*8)) & mask;
++              reg_write(addr, tval);
++              break;
++      case 2:
++              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++              mask = 0xffff0000 >> ((where % 4)*8);
++              tval = reg_read(addr);
++              tval = tval & ~mask;
++              tval |= (value << ((4 - (where % 4))*8)) & mask;
++              reg_write(addr, tval);
++              break;
++      case 4:
++              reg_write((ATH724X_PCI_DEV_BASE + where), value);
++              break;
++      default:
++              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++              return PCIBIOS_BAD_REGISTER_NUMBER;
++      }
++
++      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++      return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops ath724x_pci_ops = {
++      .read   = ath724x_pci_read,
++      .write  = ath724x_pci_write,
++};
++
++static struct resource ath724x_io_resource = {
++      .name   = "PCI IO space",
++      .start  = 0,
++      .end    = 0,
++      .flags  = IORESOURCE_IO,
++};
++
++static struct resource ath724x_mem_resource = {
++      .name   = "PCI memory space",
++      .start  = ATH724X_PCI_MEM_BASE,
++      .end    = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
++      .flags  = IORESOURCE_MEM,
++};
++
++static struct pci_controller ath724x_pci_controller = {
++      .pci_ops        = &ath724x_pci_ops,
++      .io_resource    = &ath724x_io_resource,
++      .mem_resource   = &ath724x_mem_resource,
++};
++
++int __init ath724x_pcibios_init(void)
++{
++      register_pci_controller(&ath724x_pci_controller);
++
++      return PCIBIOS_SUCCESSFUL;
++}
+--- a/arch/mips/pci/pci-ath724x.c
++++ /dev/null
+@@ -1,139 +0,0 @@
+-/*
+- *  Atheros 724x PCI support
+- *
+- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- *
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- */
+-
+-#include <linux/pci.h>
+-#include <asm/mach-ath79/pci.h>
+-
+-#define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
+-#define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+-
+-#define ATH724X_PCI_DEV_BASE  0x14000000
+-#define ATH724X_PCI_MEM_BASE  0x10000000
+-#define ATH724X_PCI_MEM_SIZE  0x08000000
+-
+-static DEFINE_SPINLOCK(ath724x_pci_lock);
+-
+-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+-                          int size, uint32_t *value)
+-{
+-      unsigned long flags, addr, tval, mask;
+-
+-      if (devfn)
+-              return PCIBIOS_DEVICE_NOT_FOUND;
+-
+-      if (where & (size - 1))
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+-      spin_lock_irqsave(&ath724x_pci_lock, flags);
+-
+-      switch (size) {
+-      case 1:
+-              addr = where & ~3;
+-              mask = 0xff000000 >> ((where % 4) * 8);
+-              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+-              tval = tval & ~mask;
+-              *value = (tval >> ((4 - (where % 4))*8));
+-              break;
+-      case 2:
+-              addr = where & ~3;
+-              mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+-              tval = tval & ~mask;
+-              *value = (tval >> ((4 - (where % 4))*8));
+-              break;
+-      case 4:
+-              *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+-              break;
+-      default:
+-              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-      }
+-
+-      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+-      return PCIBIOS_SUCCESSFUL;
+-}
+-
+-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+-                           int size, uint32_t value)
+-{
+-      unsigned long flags, tval, addr, mask;
+-
+-      if (devfn)
+-              return PCIBIOS_DEVICE_NOT_FOUND;
+-
+-      if (where & (size - 1))
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+-      spin_lock_irqsave(&ath724x_pci_lock, flags);
+-
+-      switch (size) {
+-      case 1:
+-              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+-              mask = 0xff000000 >> ((where % 4)*8);
+-              tval = reg_read(addr);
+-              tval = tval & ~mask;
+-              tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              reg_write(addr, tval);
+-              break;
+-      case 2:
+-              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+-              mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = reg_read(addr);
+-              tval = tval & ~mask;
+-              tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              reg_write(addr, tval);
+-              break;
+-      case 4:
+-              reg_write((ATH724X_PCI_DEV_BASE + where), value);
+-              break;
+-      default:
+-              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-      }
+-
+-      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+-      return PCIBIOS_SUCCESSFUL;
+-}
+-
+-static struct pci_ops ath724x_pci_ops = {
+-      .read   = ath724x_pci_read,
+-      .write  = ath724x_pci_write,
+-};
+-
+-static struct resource ath724x_io_resource = {
+-      .name   = "PCI IO space",
+-      .start  = 0,
+-      .end    = 0,
+-      .flags  = IORESOURCE_IO,
+-};
+-
+-static struct resource ath724x_mem_resource = {
+-      .name   = "PCI memory space",
+-      .start  = ATH724X_PCI_MEM_BASE,
+-      .end    = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+-      .flags  = IORESOURCE_MEM,
+-};
+-
+-static struct pci_controller ath724x_pci_controller = {
+-      .pci_ops        = &ath724x_pci_ops,
+-      .io_resource    = &ath724x_io_resource,
+-      .mem_resource   = &ath724x_mem_resource,
+-};
+-
+-int __init ath724x_pcibios_init(void)
+-{
+-      register_pci_controller(&ath724x_pci_controller);
+-
+-      return PCIBIOS_SUCCESSFUL;
+-}
diff --git a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch
new file mode 100644 (file)
index 0000000..7e5df9f
--- /dev/null
@@ -0,0 +1,266 @@
+From 0cbee5634678ffbd10bee9e302d013392dd8289e Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:16:33 +0100
+Subject: [PATCH 07/35] MIPS: ath79: replace ath724x to ar724x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Replace the 'ath724x' to 'ar724x' in function, variable and
+structure names to reflect the name of the real SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+    - refreshed due to the changes in a previous patch
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c         |    4 +-
+ arch/mips/ath79/pci.c                  |    6 ++--
+ arch/mips/ath79/pci.h                  |   10 +++---
+ arch/mips/include/asm/mach-ath79/pci.h |    4 +-
+ arch/mips/pci/pci-ar724x.c             |   62 ++++++++++++++++----------------
+ 5 files changed, 43 insertions(+), 43 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -84,7 +84,7 @@ static struct ath79_spi_platform_data ub
+ #ifdef CONFIG_PCI
+ static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-static struct ath724x_pci_data ubnt_xm_pci_data[] = {
++static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+       {
+               .irq    = UBNT_XM_PCI_IRQ,
+               .pdata  = &ubnt_xm_eeprom_data,
+@@ -108,7 +108,7 @@ static void __init ubnt_xm_init(void)
+       memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+              sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-      ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++      ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ #endif /* CONFIG_PCI */
+       ath79_register_pci();
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,10 +13,10 @@
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+-static struct ath724x_pci_data *pci_data;
++static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+ {
+       pci_data        = data;
+       pci_data_size   = size;
+@@ -50,7 +50,7 @@ int pcibios_plat_dev_init(struct pci_dev
+ int __init ath79_register_pci(void)
+ {
+       if (soc_is_ar724x())
+-              return ath724x_pcibios_init();
++              return ar724x_pcibios_init();
+       return -ENODEV;
+ }
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -8,15 +8,15 @@
+  *  by the Free Software Foundation.
+  */
+-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+-#define __ASM_MACH_ATH79_PCI_ATH724X_H
++#ifndef _ATH79_PCI_H
++#define _ATH79_PCI_H
+-struct ath724x_pci_data {
++struct ar724x_pci_data {
+       int irq;
+       void *pdata;
+ };
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+ #ifdef CONFIG_PCI
+ int ath79_register_pci(void);
+@@ -24,4 +24,4 @@ int ath79_register_pci(void);
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
+-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
++#endif /* _ATH79_PCI_H */
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -12,9 +12,9 @@
+ #define __ASM_MACH_ATH79_PCI_H
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+-int ath724x_pcibios_init(void);
++int ar724x_pcibios_init(void);
+ #else
+-static inline int ath724x_pcibios_init(void) { return 0 };
++static inline int ar724x_pcibios_init(void) { return 0 };
+ #endif
+ #endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -14,13 +14,13 @@
+ #define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+-#define ATH724X_PCI_DEV_BASE  0x14000000
+-#define ATH724X_PCI_MEM_BASE  0x10000000
+-#define ATH724X_PCI_MEM_SIZE  0x08000000
++#define AR724X_PCI_DEV_BASE   0x14000000
++#define AR724X_PCI_MEM_BASE   0x10000000
++#define AR724X_PCI_MEM_SIZE   0x08000000
+-static DEFINE_SPINLOCK(ath724x_pci_lock);
++static DEFINE_SPINLOCK(ar724x_pci_lock);
+-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *value)
+ {
+       unsigned long flags, addr, tval, mask;
+@@ -31,38 +31,38 @@ static int ath724x_pci_read(struct pci_b
+       if (where & (size - 1))
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+-      spin_lock_irqsave(&ath724x_pci_lock, flags);
++      spin_lock_irqsave(&ar724x_pci_lock, flags);
+       switch (size) {
+       case 1:
+               addr = where & ~3;
+               mask = 0xff000000 >> ((where % 4) * 8);
+-              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++              tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+               tval = tval & ~mask;
+               *value = (tval >> ((4 - (where % 4))*8));
+               break;
+       case 2:
+               addr = where & ~3;
+               mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++              tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+               tval = tval & ~mask;
+               *value = (tval >> ((4 - (where % 4))*8));
+               break;
+       case 4:
+-              *value = reg_read(ATH724X_PCI_DEV_BASE + where);
++              *value = reg_read(AR724X_PCI_DEV_BASE + where);
+               break;
+       default:
+-              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++              spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+       }
+-      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++      spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+       return PCIBIOS_SUCCESSFUL;
+ }
+-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
++static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+                            int size, uint32_t value)
+ {
+       unsigned long flags, tval, addr, mask;
+@@ -73,11 +73,11 @@ static int ath724x_pci_write(struct pci_
+       if (where & (size - 1))
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+-      spin_lock_irqsave(&ath724x_pci_lock, flags);
++      spin_lock_irqsave(&ar724x_pci_lock, flags);
+       switch (size) {
+       case 1:
+-              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++              addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+               mask = 0xff000000 >> ((where % 4)*8);
+               tval = reg_read(addr);
+               tval = tval & ~mask;
+@@ -85,7 +85,7 @@ static int ath724x_pci_write(struct pci_
+               reg_write(addr, tval);
+               break;
+       case 2:
+-              addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++              addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+               mask = 0xffff0000 >> ((where % 4)*8);
+               tval = reg_read(addr);
+               tval = tval & ~mask;
+@@ -93,47 +93,47 @@ static int ath724x_pci_write(struct pci_
+               reg_write(addr, tval);
+               break;
+       case 4:
+-              reg_write((ATH724X_PCI_DEV_BASE + where), value);
++              reg_write((AR724X_PCI_DEV_BASE + where), value);
+               break;
+       default:
+-              spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++              spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+       }
+-      spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++      spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+       return PCIBIOS_SUCCESSFUL;
+ }
+-static struct pci_ops ath724x_pci_ops = {
+-      .read   = ath724x_pci_read,
+-      .write  = ath724x_pci_write,
++static struct pci_ops ar724x_pci_ops = {
++      .read   = ar724x_pci_read,
++      .write  = ar724x_pci_write,
+ };
+-static struct resource ath724x_io_resource = {
++static struct resource ar724x_io_resource = {
+       .name   = "PCI IO space",
+       .start  = 0,
+       .end    = 0,
+       .flags  = IORESOURCE_IO,
+ };
+-static struct resource ath724x_mem_resource = {
++static struct resource ar724x_mem_resource = {
+       .name   = "PCI memory space",
+-      .start  = ATH724X_PCI_MEM_BASE,
+-      .end    = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
++      .start  = AR724X_PCI_MEM_BASE,
++      .end    = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
+       .flags  = IORESOURCE_MEM,
+ };
+-static struct pci_controller ath724x_pci_controller = {
+-      .pci_ops        = &ath724x_pci_ops,
+-      .io_resource    = &ath724x_io_resource,
+-      .mem_resource   = &ath724x_mem_resource,
++static struct pci_controller ar724x_pci_controller = {
++      .pci_ops        = &ar724x_pci_ops,
++      .io_resource    = &ar724x_io_resource,
++      .mem_resource   = &ar724x_mem_resource,
+ };
+-int __init ath724x_pcibios_init(void)
++int __init ar724x_pcibios_init(void)
+ {
+-      register_pci_controller(&ath724x_pci_controller);
++      register_pci_controller(&ar724x_pci_controller);
+       return PCIBIOS_SUCCESSFUL;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
new file mode 100644 (file)
index 0000000..adc7f18
--- /dev/null
@@ -0,0 +1,132 @@
+From db464f2ad82c03f847d8eabbb8251b5c567e6720 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:52:41 +0100
+Subject: [PATCH 08/35] MIPS: ath79: use io-accessor macros in pci-ar724x.c
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/pci/pci-ar724x.c |   38 ++++++++++++++++++++++++--------------
+ 1 files changed, 24 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -11,19 +11,19 @@
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/pci.h>
+-#define reg_read(_phys)               (*(unsigned int *) KSEG1ADDR(_phys))
+-#define reg_write(_phys, _val)        ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+-
+-#define AR724X_PCI_DEV_BASE   0x14000000
++#define AR724X_PCI_CFG_BASE   0x14000000
++#define AR724X_PCI_CFG_SIZE   0x1000
+ #define AR724X_PCI_MEM_BASE   0x10000000
+ #define AR724X_PCI_MEM_SIZE   0x08000000
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
++static void __iomem *ar724x_pci_devcfg_base;
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *value)
+ {
+       unsigned long flags, addr, tval, mask;
++      void __iomem *base;
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -31,25 +31,27 @@ static int ar724x_pci_read(struct pci_bu
+       if (where & (size - 1))
+               return PCIBIOS_BAD_REGISTER_NUMBER;
++      base = ar724x_pci_devcfg_base;
++
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
+       switch (size) {
+       case 1:
+               addr = where & ~3;
+               mask = 0xff000000 >> ((where % 4) * 8);
+-              tval = reg_read(AR724X_PCI_DEV_BASE + addr);
++              tval = __raw_readl(base + addr);
+               tval = tval & ~mask;
+               *value = (tval >> ((4 - (where % 4))*8));
+               break;
+       case 2:
+               addr = where & ~3;
+               mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = reg_read(AR724X_PCI_DEV_BASE + addr);
++              tval = __raw_readl(base + addr);
+               tval = tval & ~mask;
+               *value = (tval >> ((4 - (where % 4))*8));
+               break;
+       case 4:
+-              *value = reg_read(AR724X_PCI_DEV_BASE + where);
++              *value = __raw_readl(base + where);
+               break;
+       default:
+               spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -66,6 +68,7 @@ static int ar724x_pci_write(struct pci_b
+                            int size, uint32_t value)
+ {
+       unsigned long flags, tval, addr, mask;
++      void __iomem *base;
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -73,27 +76,29 @@ static int ar724x_pci_write(struct pci_b
+       if (where & (size - 1))
+               return PCIBIOS_BAD_REGISTER_NUMBER;
++      base = ar724x_pci_devcfg_base;
++
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
+       switch (size) {
+       case 1:
+-              addr = (AR724X_PCI_DEV_BASE + where) & ~3;
++              addr = where & ~3;
+               mask = 0xff000000 >> ((where % 4)*8);
+-              tval = reg_read(addr);
++              tval = __raw_readl(base + addr);
+               tval = tval & ~mask;
+               tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              reg_write(addr, tval);
++              __raw_writel(tval, base + addr);
+               break;
+       case 2:
+-              addr = (AR724X_PCI_DEV_BASE + where) & ~3;
++              addr = where & ~3;
+               mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = reg_read(addr);
++              tval = __raw_readl(base + addr);
+               tval = tval & ~mask;
+               tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              reg_write(addr, tval);
++              __raw_writel(tval, base + addr);
+               break;
+       case 4:
+-              reg_write((AR724X_PCI_DEV_BASE + where), value);
++              __raw_writel(value, (base + where));
+               break;
+       default:
+               spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -133,6 +138,11 @@ static struct pci_controller ar724x_pci_
+ int __init ar724x_pcibios_init(void)
+ {
++      ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
++                                       AR724X_PCI_CFG_SIZE);
++      if (ar724x_pci_devcfg_base == NULL)
++              return -ENOMEM;
++
+       register_pci_controller(&ar724x_pci_controller);
+       return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
new file mode 100644 (file)
index 0000000..1fb03c6
--- /dev/null
@@ -0,0 +1,37 @@
+From 744ffdd4e90cd6671f46eadf9d7cf55b07618d73 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 21:37:17 +0100
+Subject: [PATCH 09/35] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c
+
+The alignment of the 'where' parameters are checked
+in the core PCI code already.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/pci/pci-ar724x.c |    6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -28,9 +28,6 @@ static int ar724x_pci_read(struct pci_bu
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (where & (size - 1))
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+       base = ar724x_pci_devcfg_base;
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
+@@ -73,9 +70,6 @@ static int ar724x_pci_write(struct pci_b
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (where & (size - 1))
+-              return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+       base = ar724x_pci_devcfg_base;
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
new file mode 100644 (file)
index 0000000..c3637e8
--- /dev/null
@@ -0,0 +1,219 @@
+From 2e535c334018d58b0bf6df583486abda5bfb2003 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 22:25:30 +0100
+Subject: [PATCH 10/35] MIPS: ath79: fix broken ar724x_pci_{read,write} functions
+
+The current ar724x_pci_{read,write} functions are
+broken. Due to that, pci_read_config_byte returns
+with bogus values, and pci_write_config_{byte,word}
+unconditionally clears the accessed PCI configuration
+registers instead of changing the value of them.
+
+The patch fixes the broken functions, thus the PCI
+configuration space can be accessed correctly.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+Output of 'lspci -vv' without the patch:
+
+00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
+Network Adapter (PCI-Express) (rev 01)
+        Subsystem: Atheros Communications Inc. Device a091
+        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+        Latency: 0
+        Interrupt: pin A routed to IRQ 0
+        Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
+        Capabilities: [40] Power Management version 3
+                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
+                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
+                Address: 00000000  Data: 0000
+        Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
+                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+                        MaxPayload 128 bytes, MaxReadReq 512 bytes
+                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
+                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
+                        ClockPM- Surprise- LLActRep- BwNot-
+                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
+                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
+                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+                         Compliance De-emphasis: -6dB
+                LnkSta2: Current De-emphasis Level: -6dB
+
+Output of 'lspci -vv' with the patch:
+
+00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
+Network Adapter (PCI-Express) (rev 01)
+        Subsystem: Atheros Communications Inc. Device a091
+        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+        Latency: 0
+        Interrupt: pin A routed to IRQ 48
+        Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
+        Capabilities: [40] Power Management version 3
+                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
+                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
+                Address: 00000000  Data: 0000
+        Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
+                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+                        MaxPayload 128 bytes, MaxReadReq 512 bytes
+                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
+                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
+                        ClockPM- Surprise- LLActRep- BwNot-
+                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
+                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
+                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+                         Compliance De-emphasis: -6dB
+                LnkSta2: Current De-emphasis Level: -6dB
+        Capabilities: [100 v1] Advanced Error Reporting
+                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
+                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
+        Capabilities: [140 v1] Virtual Channel
+                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
+                Arb:    Fixed- WRR32- WRR64- WRR128-
+                Ctrl:   ArbSelect=Fixed
+                Status: InProgress-
+                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
+                        Status: NegoPending- InProgress-
+        Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
+        Capabilities: [170 v1] Power Budgeting <?>
+---
+ arch/mips/pci/pci-ar724x.c |   52 ++++++++++++++++++++++----------------------
+ 1 files changed, 26 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *value)
+ {
+-      unsigned long flags, addr, tval, mask;
++      unsigned long flags;
+       void __iomem *base;
++      u32 data;
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu
+       base = ar724x_pci_devcfg_base;
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
++      data = __raw_readl(base + (where & ~3));
+       switch (size) {
+       case 1:
+-              addr = where & ~3;
+-              mask = 0xff000000 >> ((where % 4) * 8);
+-              tval = __raw_readl(base + addr);
+-              tval = tval & ~mask;
+-              *value = (tval >> ((4 - (where % 4))*8));
++              if (where & 1)
++                      data >>= 8;
++              if (where & 2)
++                      data >>= 16;
++              data &= 0xff;
+               break;
+       case 2:
+-              addr = where & ~3;
+-              mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = __raw_readl(base + addr);
+-              tval = tval & ~mask;
+-              *value = (tval >> ((4 - (where % 4))*8));
++              if (where & 2)
++                      data >>= 16;
++              data &= 0xffff;
+               break;
+       case 4:
+-              *value = __raw_readl(base + where);
+               break;
+       default:
+               spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu
+       }
+       spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++      *value = data;
+       return PCIBIOS_SUCCESSFUL;
+ }
+@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu
+ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+                            int size, uint32_t value)
+ {
+-      unsigned long flags, tval, addr, mask;
++      unsigned long flags;
+       void __iomem *base;
++      u32 data;
++      int s;
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b
+       base = ar724x_pci_devcfg_base;
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
++      data = __raw_readl(base + (where & ~3));
+       switch (size) {
+       case 1:
+-              addr = where & ~3;
+-              mask = 0xff000000 >> ((where % 4)*8);
+-              tval = __raw_readl(base + addr);
+-              tval = tval & ~mask;
+-              tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              __raw_writel(tval, base + addr);
++              s = ((where & 3) * 8);
++              data &= ~(0xff << s);
++              data |= ((value & 0xff) << s);
+               break;
+       case 2:
+-              addr = where & ~3;
+-              mask = 0xffff0000 >> ((where % 4)*8);
+-              tval = __raw_readl(base + addr);
+-              tval = tval & ~mask;
+-              tval |= (value << ((4 - (where % 4))*8)) & mask;
+-              __raw_writel(tval, base + addr);
++              s = ((where & 2) * 8);
++              data &= ~(0xffff << s);
++              data |= ((value & 0xffff) << s);
+               break;
+       case 4:
+-              __raw_writel(value, (base + where));
++              data = value;
+               break;
+       default:
+               spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+       }
++      __raw_writel(data, base + (where & ~3));
++      /* flush write */
++      __raw_readl(base + (where & ~3));
+       spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+       return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
new file mode 100644 (file)
index 0000000..11391ab
--- /dev/null
@@ -0,0 +1,134 @@
+From b2ee3bd8706521c9bbf43405c767010927c101e5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 21 Nov 2011 17:57:51 +0100
+Subject: [PATCH 11/35] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs
+
+The PCI controller of the AR724X SoCs has a hardware
+bag. If the BAR0 register of the PCI device is set to
+the proper base address, the memory address space of
+the device is not accessible.
+
+When the device driver tries to access the memory
+address space of the PCI device, it leads to data
+bus error, similiar to this:
+
+Data bus error, epc == 801f69a0, ra == 801f698c
+Oops[#1]:
+Cpu 0
+$ 0   : 00000000 00000061 deadbeef 000000ff
+$ 4   : 00000000 000000ff 00000014 00000000
+$ 8   : ff000000 fffffffc 00000000 00000000
+$12   : 000001f5 00000006 00000000 6e637920
+$16   : 81ca4000 81ca0260 81ca4000 804d70f0
+$20   : fffffff4 0000002b 803ad4c4 00000000
+$24   : 00000003 00000000
+$28   : 81c20000 81c21c60 00000000 801f698c
+Hi    : 00000000
+Lo    : 00000000
+epc   : 801f69a0 ath9k_hw_init+0xd0/0xa70
+    Not tainted
+ra    : 801f698c ath9k_hw_init+0xbc/0xa70
+Status: 1000c103    KERNEL EXL IE
+Cause : 1080001c
+PrId  : 00019374 (MIPS 24Kc)
+Modules linked in:
+Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
+Stack : 00000000 00000000 00000000 00000000 81c21c78 81ca0260 00000000 804d70f0
+        81ca0260 81c21cc0 81ca0e80 81ca0260 81ca4000 804d70f0 fffffff4 0000002b
+        803ad4c4 00000000 00000000 801e3ae8 81c9d080 81ca0e80 b0000000 800b9b9c
+        00000008 81c9d000 8031aeb0 802d38a0 00000000 81c14c00 81c14c60 00000000
+        81ca0e80 81ca0260 b0000000 801f08a4 81c9c820 81c21d48 81c9c820 80144320
+        ...
+Call Trace:
+[<801f69a0>] ath9k_hw_init+0xd0/0xa70
+[<801e3ae8>] ath9k_init_device+0x174/0x680
+[<801f08a4>] ath_pci_probe+0x27c/0x380
+[<8019e490>] pci_device_probe+0x74/0x9c
+[<801bfadc>] driver_probe_device+0x9c/0x1b4
+[<801bfcb0>] __driver_attach+0xbc/0xc4
+[<801bea0c>] bus_for_each_dev+0x5c/0x98
+[<801bf394>] bus_add_driver+0x1d0/0x2a4
+[<801c0364>] driver_register+0x8c/0x16c
+[<8019e72c>] __pci_register_driver+0x4c/0xe4
+[<803d3d40>] ath9k_init+0x3c/0x88
+[<80060930>] do_one_initcall+0x3c/0x1cc
+[<803c297c>] kernel_init+0xa4/0x138
+[<80063c04>] kernel_thread_helper+0x10/0x18
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - apply the workaround on AR7240 only
+    - remove unrelated defines
+---
+ arch/mips/pci/pci-ar724x.c |   36 +++++++++++++++++++++++++++++++++++-
+ 1 files changed, 35 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -9,6 +9,7 @@
+  */
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/pci.h>
+ #define AR724X_PCI_CFG_BASE   0x14000000
+@@ -16,9 +17,14 @@
+ #define AR724X_PCI_MEM_BASE   0x10000000
+ #define AR724X_PCI_MEM_SIZE   0x08000000
++#define AR7240_BAR0_WAR_VALUE 0xffff
++
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
+ static void __iomem *ar724x_pci_devcfg_base;
++static u32 ar724x_pci_bar0_value;
++static bool ar724x_pci_bar0_is_cached;
++
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *value)
+ {
+@@ -56,7 +62,14 @@ static int ar724x_pci_read(struct pci_bu
+       }
+       spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+-      *value = data;
++
++      if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
++          ar724x_pci_bar0_is_cached) {
++              /* use the cached value */
++              *value = ar724x_pci_bar0_value;
++      } else {
++              *value = data;
++      }
+       return PCIBIOS_SUCCESSFUL;
+ }
+@@ -72,6 +85,27 @@ static int ar724x_pci_write(struct pci_b
+       if (devfn)
+               return PCIBIOS_DEVICE_NOT_FOUND;
++      if (soc_is_ar7240() && where == PCI_BASE_ADDRESS_0 && size == 4) {
++              if (value != 0xffffffff) {
++                      /*
++                       * WAR for a hw issue. If the BAR0 register of the
++                       * device is set to the proper base address, the
++                       * memory space of the device is not accessible.
++                       *
++                       * Cache the intended value so it can be read back,
++                       * and write a SoC specific constant value to the
++                       * BAR0 register in order to make the device memory
++                       * accessible.
++                       */
++                      ar724x_pci_bar0_is_cached = true;
++                      ar724x_pci_bar0_value = value;
++
++                      value = AR7240_BAR0_WAR_VALUE;
++              } else {
++                      ar724x_pci_bar0_is_cached = false;
++              }
++      }
++
+       base = ar724x_pci_devcfg_base;
+       spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch
new file mode 100644 (file)
index 0000000..ccb721d
--- /dev/null
@@ -0,0 +1,75 @@
+From cfb725275ea25857e8f0e3bf358fff7c84cc787c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 13:59:39 +0100
+Subject: [PATCH 12/35] MIPS: ath79: fix a wrong IRQ number
+
+The Ubiquiti XM board setup code uses an invalid
+IRQ number, because it if above of NR_IRQS. This
+leads to failed 'request_irq' calls:
+
+  ath9k 0000:00:00.0: request_irq failed
+  ath9k: probe of 0000:00:00.0 failed with error -22
+
+Preserve some IRQ numbers for the built-in IRQ
+controller of PCI host controllers in the
+AR71XX/AR724X SoCs, and use the correct IRQ
+number in the board setup code.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+The IRQ controller code is also missing, that will be
+added in a separate patch.
+---
+ arch/mips/ath79/mach-ubnt-xm.c         |    5 +++--
+ arch/mips/include/asm/mach-ath79/irq.h |    6 +++++-
+ 2 files changed, 8 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -17,6 +17,8 @@
+ #include <linux/ath9k_platform.h>
+ #endif /* CONFIG_PCI */
++#include <asm/mach-ath79/irq.h>
++
+ #include "machtypes.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+@@ -33,7 +35,6 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL    20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL        (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+-#define UBNT_XM_PCI_IRQ                       48
+ #define UBNT_XM_EEPROM_ADDR           (u8 *) KSEG1ADDR(0x1fff1000)
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_x
+ static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+       {
+-              .irq    = UBNT_XM_PCI_IRQ,
++              .irq    = ATH79_PCI_IRQ(0),
+               .pdata  = &ubnt_xm_eeprom_data,
+       },
+ };
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -10,11 +10,15 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+ #define MIPS_CPU_IRQ_BASE     0
+-#define NR_IRQS                       40
++#define NR_IRQS                       46
+ #define ATH79_MISC_IRQ_BASE   8
+ #define ATH79_MISC_IRQ_COUNT  32
++#define ATH79_PCI_IRQ_BASE    (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
++#define ATH79_PCI_IRQ_COUNT   6
++#define ATH79_PCI_IRQ(_x)     (ATH79_PCI_IRQ_BASE + (_x))
++
+ #define ATH79_CPU_IRQ_IP2     (MIPS_CPU_IRQ_BASE + 2)
+ #define ATH79_CPU_IRQ_USB     (MIPS_CPU_IRQ_BASE + 3)
+ #define ATH79_CPU_IRQ_GE0     (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
new file mode 100644 (file)
index 0000000..6da2df4
--- /dev/null
@@ -0,0 +1,213 @@
+From a4fbc2dec67a5d760e25e3c3a6c392191a5405c6 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 14:11:19 +0100
+Subject: [PATCH 13/35] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs
+
+The PCI Host Controller of the AR724x SoC has a
+built-in IRQ controller. The current code does
+not supports that, so the IRQ lines wired to this
+controller are not usable. This leads to failed
+'request_irq' calls:
+
+  ath9k 0000:00:00.0: request_irq failed
+  ath9k: probe of 0000:00:00.0 failed with error -89
+
+This patch adds support for the IRQ controller
+in order to make PCI IRQs work.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - move the interrupt controller related defines from
+      the workaround patch
+---
+ arch/mips/ath79/pci.c                  |    3 +-
+ arch/mips/include/asm/mach-ath79/pci.h |    4 +-
+ arch/mips/pci/pci-ar724x.c             |  118 +++++++++++++++++++++++++++++++-
+ 3 files changed, 120 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -10,6 +10,7 @@
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/irq.h>
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+@@ -50,7 +51,7 @@ int pcibios_plat_dev_init(struct pci_dev
+ int __init ath79_register_pci(void)
+ {
+       if (soc_is_ar724x())
+-              return ar724x_pcibios_init();
++              return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+       return -ENODEV;
+ }
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -12,9 +12,9 @@
+ #define __ASM_MACH_ATH79_PCI_H
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+-int ar724x_pcibios_init(void);
++int ar724x_pcibios_init(int irq);
+ #else
+-static inline int ar724x_pcibios_init(void) { return 0 };
++static inline int ar724x_pcibios_init(int irq) { return 0 };
+ #endif
+ #endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -8,19 +8,32 @@
+  *  by the Free Software Foundation.
+  */
++#include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/pci.h>
+ #define AR724X_PCI_CFG_BASE   0x14000000
+ #define AR724X_PCI_CFG_SIZE   0x1000
++#define AR724X_PCI_CTRL_BASE  (AR71XX_APB_BASE + 0x000f0000)
++#define AR724X_PCI_CTRL_SIZE  0x100
++
+ #define AR724X_PCI_MEM_BASE   0x10000000
+ #define AR724X_PCI_MEM_SIZE   0x08000000
++#define AR724X_PCI_REG_INT_STATUS     0x4c
++#define AR724X_PCI_REG_INT_MASK               0x50
++
++#define AR724X_PCI_INT_DEV0           BIT(14)
++
++#define AR724X_PCI_IRQ_COUNT          1
++
+ #define AR7240_BAR0_WAR_VALUE 0xffff
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
+ static void __iomem *ar724x_pci_devcfg_base;
++static void __iomem *ar724x_pci_ctrl_base;
+ static u32 ar724x_pci_bar0_value;
+ static bool ar724x_pci_bar0_is_cached;
+@@ -164,14 +177,115 @@ static struct pci_controller ar724x_pci_
+       .mem_resource   = &ar724x_mem_resource,
+ };
+-int __init ar724x_pcibios_init(void)
++static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++      void __iomem *base;
++      u32 pending;
++
++      base = ar724x_pci_ctrl_base;
++
++      pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
++                __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++
++      if (pending & AR724X_PCI_INT_DEV0)
++              generic_handle_irq(ATH79_PCI_IRQ(0));
++
++      else
++              spurious_interrupt();
++}
++
++static void ar724x_pci_irq_unmask(struct irq_data *d)
++{
++      void __iomem *base;
++      u32 t;
++
++      base = ar724x_pci_ctrl_base;
++
++      switch (d->irq) {
++      case ATH79_PCI_IRQ(0):
++              t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++              __raw_writel(t | AR724X_PCI_INT_DEV0,
++                           base + AR724X_PCI_REG_INT_MASK);
++              /* flush write */
++              __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++      }
++}
++
++static void ar724x_pci_irq_mask(struct irq_data *d)
++{
++      void __iomem *base;
++      u32 t;
++
++      base = ar724x_pci_ctrl_base;
++
++      switch (d->irq) {
++      case ATH79_PCI_IRQ(0):
++              t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++              __raw_writel(t & ~AR724X_PCI_INT_DEV0,
++                           base + AR724X_PCI_REG_INT_MASK);
++
++              /* flush write */
++              __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++
++              t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
++              __raw_writel(t | AR724X_PCI_INT_DEV0,
++                           base + AR724X_PCI_REG_INT_STATUS);
++
++              /* flush write */
++              __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
++      }
++}
++
++static struct irq_chip ar724x_pci_irq_chip = {
++      .name           = "AR724X PCI ",
++      .irq_mask       = ar724x_pci_irq_mask,
++      .irq_unmask     = ar724x_pci_irq_unmask,
++      .irq_mask_ack   = ar724x_pci_irq_mask,
++};
++
++static void __init ar724x_pci_irq_init(int irq)
++{
++      void __iomem *base;
++      int i;
++
++      base = ar724x_pci_ctrl_base;
++
++      __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
++      __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
++
++      BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
++
++      for (i = ATH79_PCI_IRQ_BASE;
++           i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
++                                       handle_level_irq);
++
++      irq_set_chained_handler(irq, ar724x_pci_irq_handler);
++}
++
++int __init ar724x_pcibios_init(int irq)
+ {
++      int ret;
++
++      ret = -ENOMEM;
++
+       ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
+                                        AR724X_PCI_CFG_SIZE);
+       if (ar724x_pci_devcfg_base == NULL)
+-              return -ENOMEM;
++              goto err;
++      ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
++                                     AR724X_PCI_CTRL_SIZE);
++      if (ar724x_pci_ctrl_base == NULL)
++              goto err_unmap_devcfg;
++
++      ar724x_pci_irq_init(irq);
+       register_pci_controller(&ar724x_pci_controller);
+       return PCIBIOS_SUCCESSFUL;
++
++err_unmap_devcfg:
++      iounmap(ar724x_pci_devcfg_base);
++err:
++      return ret;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
new file mode 100644 (file)
index 0000000..17776ad
--- /dev/null
@@ -0,0 +1,63 @@
+From adeefb0860e92f44c7d66d5fccdb217fccfb8a81 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 10:19:08 +0100
+Subject: [PATCH 14/35] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c
+
+Remove a superfluous ifdef around an include. Also
+reorganize the board setup code a bit, so another
+ifdef can be removed.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c |   23 ++++++++++++-----------
+ 1 files changed, 12 insertions(+), 11 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -12,10 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+-
+-#ifdef CONFIG_PCI
+ #include <linux/ath9k_platform.h>
+-#endif /* CONFIG_PCI */
+ #include <asm/mach-ath79/irq.h>
+@@ -91,6 +88,17 @@ static struct ar724x_pci_data ubnt_xm_pc
+               .pdata  = &ubnt_xm_eeprom_data,
+       },
+ };
++
++static void __init ubnt_xm_pci_init(void)
++{
++      memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
++             sizeof(ubnt_xm_eeprom_data.eeprom_data));
++
++      ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++      ath79_register_pci();
++}
++#else
++static inline void ubnt_xm_pci_init(void) {}
+ #endif /* CONFIG_PCI */
+ static void __init ubnt_xm_init(void)
+@@ -105,14 +113,7 @@ static void __init ubnt_xm_init(void)
+       ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+                          ARRAY_SIZE(ubnt_xm_spi_info));
+-#ifdef CONFIG_PCI
+-      memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+-             sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+-      ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+-#endif /* CONFIG_PCI */
+-
+-      ath79_register_pci();
++      ubnt_xm_pci_init();
+ }
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
new file mode 100644 (file)
index 0000000..91430a4
--- /dev/null
@@ -0,0 +1,143 @@
+From 83d74abc7d549f5d6292b0474be080983239c0bd Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 10:29:36 +0100
+Subject: [PATCH 15/35] MIPS: ath79: allow to use board specific pci_plat_dev_init functions
+
+Th current implementation causes NULL pointer dereference
+if 'pci_data' is not set:
+
+pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
+pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI
+address [0x10000000-0x1000ffff])
+CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4
+Oops[#1]:
+Cpu 0
+$ 0   : 00000000 80420000 00000000 00000000
+$ 4   : 00000000 00000000 00000001 00000001
+$ 8   : 00000001 0000032c 81c54700 00000001
+$12   : 0000032d 0000000f 00000000 ffffffff
+$16   : 81c14c00 00000001 802dac74 80195f98
+$20   : 802ea050 00000000 00000000 00000000
+$24   : 00000003 800617f0
+$28   : 81c20000 81c21e70 00000000 802e78a4
+Hi    : 00000000
+Lo    : 4190ab00
+epc   : 802daca0 0x802daca0
+    Not tainted
+ra    : 802e78a4 0x802e78a4
+Status: 1000c003    KERNEL EXL IE
+Cause : 00800008
+BadVA : 00000000
+PrId  : 00019374 (MIPS 24Kc)
+Modules linked in:
+Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
+Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000
+        802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290
+        80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000
+        00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000
+        00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000
+
+This can be avoided by calling the 'ar724x_pci_add_data'
+function from the board specific setup code. However it
+makes no sense to use that function for every board,
+especially when the board does not needs to set the
+platform_data field of any PCI device.
+
+The patch allows the board setup code to specify a board
+specific function if that is required.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+The pci_irq_map function can throw another NULL pointer
+dereference, that will be fixed in a subsequent patch.
+---
+ arch/mips/ath79/mach-ubnt-xm.c |   13 ++++++++++++-
+ arch/mips/ath79/pci.c          |   14 ++++++++------
+ arch/mips/ath79/pci.h          |    4 +++-
+ 3 files changed, 23 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -85,16 +85,27 @@ static struct ath9k_platform_data ubnt_x
+ static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+       {
+               .irq    = ATH79_PCI_IRQ(0),
+-              .pdata  = &ubnt_xm_eeprom_data,
+       },
+ };
++static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
++{
++      switch (PCI_SLOT(dev->devfn)) {
++      case 0:
++              dev->dev.platform_data = &ubnt_xm_eeprom_data;
++              break;
++      }
++
++      return 0;
++}
++
+ static void __init ubnt_xm_pci_init(void)
+ {
+       memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+              sizeof(ubnt_xm_eeprom_data.eeprom_data));
+       ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++      ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+       ath79_register_pci();
+ }
+ #else
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -14,6 +14,7 @@
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
++static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+ static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
+@@ -38,14 +39,15 @@ int __init pcibios_map_irq(const struct
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
+-      unsigned int devfn = dev->devfn;
+-
+-      if (devfn > pci_data_size - 1)
+-              return PCIBIOS_DEVICE_NOT_FOUND;
++      if (ath79_pci_plat_dev_init)
++              return ath79_pci_plat_dev_init(dev);
+-      dev->dev.platform_data = pci_data[devfn].pdata;
++      return 0;
++}
+-      return PCIBIOS_SUCCESSFUL;
++void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
++{
++      ath79_pci_plat_dev_init = func;
+ }
+ int __init ath79_register_pci(void)
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -13,14 +13,16 @@
+ struct ar724x_pci_data {
+       int irq;
+-      void *pdata;
+ };
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+ #ifdef CONFIG_PCI
++void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+ int ath79_register_pci(void);
+ #else
++static inline void
++ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
diff --git a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
new file mode 100644 (file)
index 0000000..78e8bd5
--- /dev/null
@@ -0,0 +1,435 @@
+From 9f6d46372cf2a493eaeeffbefe0a796379f838fa Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 22:54:32 +0100
+Subject: [PATCH 16/35] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs
+
+The Atheros AR71XX SoCs have a built-in PCI Host Controller.
+This patch adds a driver for that, and modifies the relevant
+files in order to allow to register the PCI controller from
+board specific setup.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+v2: - add missing pci-ar71xx.c
+---
+ arch/mips/ath79/Kconfig                |    1 +
+ arch/mips/include/asm/mach-ath79/pci.h |    6 +
+ arch/mips/pci/Makefile                 |    1 +
+ arch/mips/pci/pci-ar71xx.c             |  375 ++++++++++++++++++++++++++++++++
+ 4 files changed, 383 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/pci/pci-ar71xx.c
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -52,6 +52,7 @@ endmenu
+ config SOC_AR71XX
+       select USB_ARCH_HAS_EHCI
+       select USB_ARCH_HAS_OHCI
++      select HW_HAS_PCI
+       def_bool n
+ config SOC_AR724X
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -11,6 +11,12 @@
+ #ifndef __ASM_MACH_ATH79_PCI_H
+ #define __ASM_MACH_ATH79_PCI_H
++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
++int ar71xx_pcibios_init(void);
++#else
++static inline int ar71xx_pcibios_init(void) { return 0 };
++#endif
++
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX)                += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
+                                       ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
++obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
+ obj-$(CONFIG_SOC_AR724X)      += pci-ar724x.o
+ #
+--- /dev/null
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -0,0 +1,375 @@
++/*
++ *  Atheros AR71xx PCI host controller driver
++ *
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/resource.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/bitops.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/pci.h>
++
++#define AR71XX_PCI_MEM_BASE   0x10000000
++#define AR71XX_PCI_MEM_SIZE   0x08000000
++
++#define AR71XX_PCI_WIN0_OFFS          0x10000000
++#define AR71XX_PCI_WIN1_OFFS          0x11000000
++#define AR71XX_PCI_WIN2_OFFS          0x12000000
++#define AR71XX_PCI_WIN3_OFFS          0x13000000
++#define AR71XX_PCI_WIN4_OFFS          0x14000000
++#define AR71XX_PCI_WIN5_OFFS          0x15000000
++#define AR71XX_PCI_WIN6_OFFS          0x16000000
++#define AR71XX_PCI_WIN7_OFFS          0x07000000
++
++#define AR71XX_PCI_CFG_BASE           \
++      (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
++#define AR71XX_PCI_CFG_SIZE           0x100
++
++#define AR71XX_PCI_REG_CRP_AD_CBE     0x00
++#define AR71XX_PCI_REG_CRP_WRDATA     0x04
++#define AR71XX_PCI_REG_CRP_RDDATA     0x08
++#define AR71XX_PCI_REG_CFG_AD         0x0c
++#define AR71XX_PCI_REG_CFG_CBE                0x10
++#define AR71XX_PCI_REG_CFG_WRDATA     0x14
++#define AR71XX_PCI_REG_CFG_RDDATA     0x18
++#define AR71XX_PCI_REG_PCI_ERR                0x1c
++#define AR71XX_PCI_REG_PCI_ERR_ADDR   0x20
++#define AR71XX_PCI_REG_AHB_ERR                0x24
++#define AR71XX_PCI_REG_AHB_ERR_ADDR   0x28
++
++#define AR71XX_PCI_CRP_CMD_WRITE      0x00010000
++#define AR71XX_PCI_CRP_CMD_READ               0x00000000
++#define AR71XX_PCI_CFG_CMD_READ               0x0000000a
++#define AR71XX_PCI_CFG_CMD_WRITE      0x0000000b
++
++#define AR71XX_PCI_INT_CORE           BIT(4)
++#define AR71XX_PCI_INT_DEV2           BIT(2)
++#define AR71XX_PCI_INT_DEV1           BIT(1)
++#define AR71XX_PCI_INT_DEV0           BIT(0)
++
++#define AR71XX_PCI_IRQ_COUNT          5
++
++static DEFINE_SPINLOCK(ar71xx_pci_lock);
++static void __iomem *ar71xx_pcicfg_base;
++
++/* Byte lane enable bits */
++static const u8 ar71xx_pci_ble_table[4][4] = {
++      {0x0, 0xf, 0xf, 0xf},
++      {0xe, 0xd, 0xb, 0x7},
++      {0xc, 0xf, 0x3, 0xf},
++      {0xf, 0xf, 0xf, 0xf},
++};
++
++static const u32 ar71xx_pci_read_mask[8] = {
++      0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
++};
++
++static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
++{
++      u32 t;
++
++      t = ar71xx_pci_ble_table[size & 3][where & 3];
++      BUG_ON(t == 0xf);
++      t <<= (local) ? 20 : 4;
++
++      return t;
++}
++
++static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
++                                    int where)
++{
++      u32 ret;
++
++      if (!bus->number) {
++              /* type 0 */
++              ret = (1 << PCI_SLOT(devfn)) | (PCI_FUNC(devfn) << 8) |
++                    (where & ~3);
++      } else {
++              /* type 1 */
++              ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) |
++                    (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
++      }
++
++      return ret;
++}
++
++static int ar71xx_pci_check_error(int quiet)
++{
++      void __iomem *base = ar71xx_pcicfg_base;
++      u32 pci_err;
++      u32 ahb_err;
++
++      pci_err = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR) & 3;
++      if (pci_err) {
++              if (!quiet) {
++                      u32 addr;
++
++                      addr = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR_ADDR);
++                      pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
++                              "PCI", pci_err, addr);
++              }
++
++              /* clear PCI error status */
++              __raw_writel(pci_err, base + AR71XX_PCI_REG_PCI_ERR);
++      }
++
++      ahb_err = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR) & 1;
++      if (ahb_err) {
++              if (!quiet) {
++                      u32 addr;
++
++                      addr = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR_ADDR);
++                      pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
++                              "AHB", ahb_err, addr);
++              }
++
++              /* clear AHB error status */
++              __raw_writel(ahb_err, base + AR71XX_PCI_REG_AHB_ERR);
++      }
++
++      return !!(ahb_err | pci_err);
++}
++
++static inline void ar71xx_pci_local_write(int where, int size, u32 value)
++{
++      void __iomem *base = ar71xx_pcicfg_base;
++      u32 ad_cbe;
++
++      value = value << (8 * (where & 3));
++
++      ad_cbe = AR71XX_PCI_CRP_CMD_WRITE | (where & ~3);
++      ad_cbe |= ar71xx_pci_get_ble(where, size, 1);
++
++      __raw_writel(ad_cbe, base + AR71XX_PCI_REG_CRP_AD_CBE);
++      __raw_writel(value, base + AR71XX_PCI_REG_CRP_WRDATA);
++}
++
++static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
++                                       unsigned int devfn,
++                                       int where, int size, u32 cmd)
++{
++      void __iomem *base = ar71xx_pcicfg_base;
++      u32 addr;
++
++      addr = ar71xx_pci_bus_addr(bus, devfn, where);
++
++      __raw_writel(addr, base + AR71XX_PCI_REG_CFG_AD);
++      __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
++                   base + AR71XX_PCI_REG_CFG_CBE);
++
++      return ar71xx_pci_check_error(1);
++}
++
++static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
++                                int where, int size, u32 *value)
++{
++      void __iomem *base = ar71xx_pcicfg_base;
++      unsigned long flags;
++      u32 data;
++      int err;
++      int ret;
++
++      ret = PCIBIOS_SUCCESSFUL;
++      data = ~0;
++
++      spin_lock_irqsave(&ar71xx_pci_lock, flags);
++
++      err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++                                   AR71XX_PCI_CFG_CMD_READ);
++      if (err)
++              ret = PCIBIOS_DEVICE_NOT_FOUND;
++      else
++              data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
++
++      spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++      *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
++
++      return ret;
++}
++
++static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
++                                 int where, int size, u32 value)
++{
++      void __iomem *base = ar71xx_pcicfg_base;
++      unsigned long flags;
++      int err;
++      int ret;
++
++      value = value << (8 * (where & 3));
++      ret = PCIBIOS_SUCCESSFUL;
++
++      spin_lock_irqsave(&ar71xx_pci_lock, flags);
++
++      err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++                                   AR71XX_PCI_CFG_CMD_WRITE);
++      if (err)
++              ret = PCIBIOS_DEVICE_NOT_FOUND;
++      else
++              __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
++
++      spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++      return ret;
++}
++
++static struct pci_ops ar71xx_pci_ops = {
++      .read   = ar71xx_pci_read_config,
++      .write  = ar71xx_pci_write_config,
++};
++
++static struct resource ar71xx_pci_io_resource = {
++      .name           = "PCI IO space",
++      .start          = 0,
++      .end            = 0,
++      .flags          = IORESOURCE_IO,
++};
++
++static struct resource ar71xx_pci_mem_resource = {
++      .name           = "PCI memory space",
++      .start          = AR71XX_PCI_MEM_BASE,
++      .end            = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
++      .flags          = IORESOURCE_MEM
++};
++
++static struct pci_controller ar71xx_pci_controller = {
++      .pci_ops        = &ar71xx_pci_ops,
++      .mem_resource   = &ar71xx_pci_mem_resource,
++      .io_resource    = &ar71xx_pci_io_resource,
++};
++
++static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++      void __iomem *base = ath79_reset_base;
++      u32 pending;
++
++      pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
++                __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++      if (pending & AR71XX_PCI_INT_DEV0)
++              generic_handle_irq(ATH79_PCI_IRQ(0));
++
++      else if (pending & AR71XX_PCI_INT_DEV1)
++              generic_handle_irq(ATH79_PCI_IRQ(1));
++
++      else if (pending & AR71XX_PCI_INT_DEV2)
++              generic_handle_irq(ATH79_PCI_IRQ(2));
++
++      else if (pending & AR71XX_PCI_INT_CORE)
++              generic_handle_irq(ATH79_PCI_IRQ(4));
++
++      else
++              spurious_interrupt();
++}
++
++static void ar71xx_pci_irq_unmask(struct irq_data *d)
++{
++      unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
++      void __iomem *base = ath79_reset_base;
++      u32 t;
++
++      t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++      __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++      /* flush write */
++      __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++}
++
++static void ar71xx_pci_irq_mask(struct irq_data *d)
++{
++      unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
++      void __iomem *base = ath79_reset_base;
++      u32 t;
++
++      t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++      __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++      /* flush write */
++      __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++}
++
++static struct irq_chip ar71xx_pci_irq_chip = {
++      .name           = "AR71XX PCI",
++      .irq_mask       = ar71xx_pci_irq_mask,
++      .irq_unmask     = ar71xx_pci_irq_unmask,
++      .irq_mask_ack   = ar71xx_pci_irq_mask,
++};
++
++static __init void ar71xx_pci_irq_init(void)
++{
++      void __iomem *base = ath79_reset_base;
++      int i;
++
++      __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++      __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
++
++      BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
++
++      for (i = ATH79_PCI_IRQ_BASE;
++           i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
++                                       handle_level_irq);
++
++      irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
++}
++
++static __init void ar71xx_pci_reset(void)
++{
++      void __iomem *ddr_base = ath79_ddr_base;
++
++      ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
++      mdelay(100);
++
++      ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
++      mdelay(100);
++
++      __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
++      __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
++      __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
++      __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
++      __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
++      __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
++      __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
++      __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
++
++      mdelay(100);
++}
++
++__init int ar71xx_pcibios_init(void)
++{
++      u32 t;
++
++      ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
++      if (ar71xx_pcicfg_base == NULL)
++              return -ENOMEM;
++
++      ar71xx_pci_reset();
++
++      /* setup COMMAND register */
++      t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
++        | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
++      ar71xx_pci_local_write(PCI_COMMAND, 4, t);
++
++      /* clear bus errors */
++      ar71xx_pci_check_error(1);
++
++      ar71xx_pci_irq_init();
++
++      register_pci_controller(&ar71xx_pci_controller);
++
++      return 0;
++}
diff --git a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
new file mode 100644 (file)
index 0000000..251de55
--- /dev/null
@@ -0,0 +1,164 @@
+From 8a1a5852aa7f8cfc027b2b0bb51cbbac4309e144 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 14:32:09 +0100
+Subject: [PATCH 17/35] MIPS: ath79: allow to use SoC specific PCI IRQ maps
+
+The PCI controllers in the AR71XX and in the
+AR724X SoCs are different, and both of them
+uses different IRQ wiring.
+
+The patch modifies the 'pcibios_map_irq' function
+in order to allow to use different IRQ maps for
+the different SoCs. The patch also adds a function,
+which lets the board setup code to override the
+default IRQ map.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/pci.c |   72 ++++++++++++++++++++++++++++++++++++++++++++++---
+ arch/mips/ath79/pci.h |    9 ++++++
+ 2 files changed, 77 insertions(+), 4 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -8,6 +8,7 @@
+  *  by the Free Software Foundation.
+  */
++#include <linux/init.h>
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+@@ -15,9 +16,35 @@
+ #include "pci.h"
+ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
++static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
++static unsigned ath79_pci_nr_irqs __initdata;
+ static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
++static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
++      {
++              .slot   = 17,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(0),
++      }, {
++              .slot   = 18,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(1),
++      }, {
++              .slot   = 19,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(2),
++      }
++};
++
++static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
++      {
++              .slot   = 0,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(0),
++      }
++};
++
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+ {
+       pci_data        = data;
+@@ -26,13 +53,40 @@ void ar724x_pci_add_data(struct ar724x_p
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+-      unsigned int devfn = dev->devfn;
+       int irq = -1;
++      int i;
+-      if (devfn > pci_data_size - 1)
+-              return irq;
+-
+-      irq = pci_data[devfn].irq;
++      if (ath79_pci_nr_irqs == 0 ||
++          ath79_pci_irq_map == NULL) {
++              if (soc_is_ar71xx()) {
++                      ath79_pci_irq_map = ar71xx_pci_irq_map;
++                      ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
++              } else if (soc_is_ar724x()) {
++                      ath79_pci_irq_map = ar724x_pci_irq_map;
++                      ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
++              } else {
++                      pr_crit("pci %s: invalid irq map\n",
++                              pci_name((struct pci_dev *) dev));
++                      return irq;
++              }
++      }
++
++      for (i = 0; i < ath79_pci_nr_irqs; i++) {
++              const struct ath79_pci_irq *entry;
++
++              entry = &ath79_pci_irq_map[i];
++              if (entry->slot == slot && entry->pin == pin) {
++                      irq = entry->irq;
++                      break;
++              }
++      }
++
++      if (irq < 0)
++              pr_crit("pci %s: no irq found for pin %u\n",
++                      pci_name((struct pci_dev *) dev), pin);
++      else
++              pr_info("pci %s: using irq %d for pin %u\n",
++                      pci_name((struct pci_dev *) dev), irq, pin);
+       return irq;
+ }
+@@ -45,6 +99,13 @@ int pcibios_plat_dev_init(struct pci_dev
+       return 0;
+ }
++void __init ath79_pci_set_irq_map(unsigned nr_irqs,
++                                const struct ath79_pci_irq *map)
++{
++      ath79_pci_nr_irqs = nr_irqs;
++      ath79_pci_irq_map = map;
++}
++
+ void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
+ {
+       ath79_pci_plat_dev_init = func;
+@@ -52,6 +113,9 @@ void __init ath79_pci_set_plat_dev_init(
+ int __init ath79_register_pci(void)
+ {
++      if (soc_is_ar71xx())
++              return ar71xx_pcibios_init();
++
+       if (soc_is_ar724x())
+               return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -15,13 +15,22 @@ struct ar724x_pci_data {
+       int irq;
+ };
++struct ath79_pci_irq {
++      u8      slot;
++      u8      pin;
++      int     irq;
++};
++
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+ #ifdef CONFIG_PCI
++void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+ void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+ int ath79_register_pci(void);
+ #else
+ static inline void
++ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
++static inline void
+ ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
diff --git a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
new file mode 100644 (file)
index 0000000..1ce9804
--- /dev/null
@@ -0,0 +1,85 @@
+From 0b026adc7a471edd018a060427e62d06e54be2bc Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 15:50:32 +0100
+Subject: [PATCH 18/35] MIPS: ath79: remove ar724x_pci_add_data function
+
+The variables set by this function are not used anymore.
+Remove the function and the relevant variables as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c |    7 -------
+ arch/mips/ath79/pci.c          |    8 --------
+ arch/mips/ath79/pci.h          |    6 ------
+ 3 files changed, 0 insertions(+), 21 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -82,12 +82,6 @@ static struct ath79_spi_platform_data ub
+ #ifdef CONFIG_PCI
+ static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+-      {
+-              .irq    = ATH79_PCI_IRQ(0),
+-      },
+-};
+-
+ static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+ {
+       switch (PCI_SLOT(dev->devfn)) {
+@@ -104,7 +98,6 @@ static void __init ubnt_xm_pci_init(void
+       memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+              sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-      ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+       ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+       ath79_register_pci();
+ }
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -18,8 +18,6 @@
+ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+-static struct ar724x_pci_data *pci_data;
+-static int pci_data_size;
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+       {
+@@ -45,12 +43,6 @@ static const struct ath79_pci_irq ar724x
+       }
+ };
+-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+-{
+-      pci_data        = data;
+-      pci_data_size   = size;
+-}
+-
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+       int irq = -1;
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -11,18 +11,12 @@
+ #ifndef _ATH79_PCI_H
+ #define _ATH79_PCI_H
+-struct ar724x_pci_data {
+-      int irq;
+-};
+-
+ struct ath79_pci_irq {
+       u8      slot;
+       u8      pin;
+       int     irq;
+ };
+-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+-
+ #ifdef CONFIG_PCI
+ void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+ void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
diff --git a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
new file mode 100644 (file)
index 0000000..36d17e9
--- /dev/null
@@ -0,0 +1,33 @@
+From 1759a5bc87d0eb8dbb0d8a9794b336813057eb88 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 25 Nov 2010 17:59:28 +0100
+Subject: [PATCH 19/35] MIPS: ath79: register PCI controller on the PB44 board
+
+The PB44 reference board has two miniPCI slots. Register
+the PCI controller to make those usable.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-pb44.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -19,6 +19,7 @@
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "pci.h"
+ #define PB44_GPIO_I2C_SCL     0
+ #define PB44_GPIO_I2C_SDA     1
+@@ -114,6 +115,7 @@ static void __init pb44_init(void)
+       ath79_register_spi(&pb44_spi_data, pb44_spi_info,
+                          ARRAY_SIZE(pb44_spi_info));
+       ath79_register_usb();
++      ath79_register_pci();
+ }
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
new file mode 100644 (file)
index 0000000..486e6f9
--- /dev/null
@@ -0,0 +1,77 @@
+From e83c294ff219ff709b8179cbff64f293199a6dad Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 21:13:58 +0100
+Subject: [PATCH 20/35] MIPS: ath79: update copyright headers of PCI related files
+
+Add copyright records according to the recent changes in
+the PCI code. Also fix up the descriptions.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+Just in case if someone is curious about why 2008 and 2009 years are
+present in this change:
+
+The recent PCI specific changes were based on an existing
+code which can be found in the OpenWrt repository, and we
+are working on that since 2008.
+
+v2: - no changes
+---
+ arch/mips/ath79/pci.c                  |    4 ++++
+ arch/mips/ath79/pci.h                  |    4 +++-
+ arch/mips/include/asm/mach-ath79/pci.h |    4 +++-
+ arch/mips/pci/pci-ar724x.c             |    3 ++-
+ 4 files changed, 12 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -2,6 +2,10 @@
+  *  Atheros AR71XX/AR724X specific PCI setup code
+  *
+  *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Parts of this file are based on Atheros' 2.6.15 BSP
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -1,7 +1,9 @@
+ /*
+- *  Atheros 724x PCI support
++ *  Atheros AR71XX/AR724X PCI support
+  *
+  *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -1,7 +1,9 @@
+ /*
+- *  Atheros 724x PCI support
++ *  Atheros AR71XX/AR724X PCI support
+  *
+  *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -1,7 +1,8 @@
+ /*
+- *  Atheros 724x PCI support
++ *  Atheros AR724X PCI host controller driver
+  *
+  *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *  Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
diff --git a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch
new file mode 100644 (file)
index 0000000..d22aede
--- /dev/null
@@ -0,0 +1,52 @@
+From f60aed87f838ecfa4033ff1f63f97d05359b3b51 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 17:36:08 +0100
+Subject: [PATCH 21/35] MIPS: ath79: add early_printk support for AR934X
+
+The patch allows to see kernel messages on AR934X SoCs in
+early boot stage.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/early_printk.c                 |    3 +++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    6 +++++-
+ 2 files changed, 8 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
+       case REV_ID_MAJOR_AR7241:
+       case REV_ID_MAJOR_AR7242:
+       case REV_ID_MAJOR_AR913X:
++      case REV_ID_MAJOR_AR9341:
++      case REV_ID_MAJOR_AR9342:
++      case REV_ID_MAJOR_AR9344:
+               _prom_putchar = prom_putchar_ar71xx;
+               break;
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1,10 +1,11 @@
+ /*
+  *  Atheros AR71XX/AR724X/AR913X SoC register definitions
+  *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+  *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+- *  Parts of this file are based on Atheros' 2.6.15 BSP
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+@@ -249,6 +250,9 @@
+ #define REV_ID_MAJOR_AR7242           0x1100
+ #define REV_ID_MAJOR_AR9330           0x0110
+ #define REV_ID_MAJOR_AR9331           0x1110
++#define REV_ID_MAJOR_AR9341           0x0120
++#define REV_ID_MAJOR_AR9342           0x1120
++#define REV_ID_MAJOR_AR9344           0x2120
+ #define AR71XX_REV_ID_MINOR_MASK      0x3
+ #define AR71XX_REV_ID_MINOR_AR7130    0x0
diff --git a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
new file mode 100644 (file)
index 0000000..dc54533
--- /dev/null
@@ -0,0 +1,54 @@
+From 655a57ed2df5e34c32645e08c3244facba70ae5f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 14:39:04 +0100
+Subject: [PATCH 22/35] MIPS: ath79: sort case statements in ath79_detect_sys_type
+
+Sort the case statements alphabetically in order to improve
+readability.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/setup.c |   24 ++++++++++++------------
+ 1 files changed, 12 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -116,18 +116,6 @@ static void __init ath79_detect_sys_type
+               rev = id & AR724X_REV_ID_REVISION_MASK;
+               break;
+-      case REV_ID_MAJOR_AR9330:
+-              ath79_soc = ATH79_SOC_AR9330;
+-              chip = "9330";
+-              rev = id & AR933X_REV_ID_REVISION_MASK;
+-              break;
+-
+-      case REV_ID_MAJOR_AR9331:
+-              ath79_soc = ATH79_SOC_AR9331;
+-              chip = "9331";
+-              rev = id & AR933X_REV_ID_REVISION_MASK;
+-              break;
+-
+       case REV_ID_MAJOR_AR913X:
+               minor = id & AR913X_REV_ID_MINOR_MASK;
+               rev = id >> AR913X_REV_ID_REVISION_SHIFT;
+@@ -145,6 +133,18 @@ static void __init ath79_detect_sys_type
+               }
+               break;
++      case REV_ID_MAJOR_AR9330:
++              ath79_soc = ATH79_SOC_AR9330;
++              chip = "9330";
++              rev = id & AR933X_REV_ID_REVISION_MASK;
++              break;
++
++      case REV_ID_MAJOR_AR9331:
++              ath79_soc = ATH79_SOC_AR9331;
++              chip = "9331";
++              rev = id & AR933X_REV_ID_REVISION_MASK;
++              break;
++
+       default:
+               panic("ath79: unknown SoC, id:0x%08x", id);
+       }
diff --git a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..f503ad1
--- /dev/null
@@ -0,0 +1,120 @@
+From 9c19e86a7eccf8efd159ba213290830164f33a71 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 17:36:42 +0100
+Subject: [PATCH 23/35] MIPS: ath79: add SoC detection code for AR934X
+
+Also add 'soc_is_ar934[124x]' helper functions and a Kconfig
+symbol for the AR934X SoCs.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig                        |    4 ++++
+ arch/mips/ath79/setup.c                        |   21 ++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    2 ++
+ arch/mips/include/asm/mach-ath79/ath79.h       |   23 +++++++++++++++++++++++
+ 4 files changed, 49 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -69,6 +69,10 @@ config SOC_AR933X
+       select USB_ARCH_HAS_EHCI
+       def_bool n
++config SOC_AR934X
++      select USB_ARCH_HAS_EHCI
++      def_bool n
++
+ config ATH79_DEV_GPIO_BUTTONS
+       def_bool n
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -1,10 +1,11 @@
+ /*
+  *  Atheros AR71XX/AR724X/AR913X specific setup
+  *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+  *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+- *  Parts of this file are based on Atheros' 2.6.15 BSP
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+@@ -145,6 +146,24 @@ static void __init ath79_detect_sys_type
+               rev = id & AR933X_REV_ID_REVISION_MASK;
+               break;
++      case REV_ID_MAJOR_AR9341:
++              ath79_soc = ATH79_SOC_AR9341;
++              chip = "9341";
++              rev = id & AR934X_REV_ID_REVISION_MASK;
++              break;
++
++      case REV_ID_MAJOR_AR9342:
++              ath79_soc = ATH79_SOC_AR9342;
++              chip = "9342";
++              rev = id & AR934X_REV_ID_REVISION_MASK;
++              break;
++
++      case REV_ID_MAJOR_AR9344:
++              ath79_soc = ATH79_SOC_AR9344;
++              chip = "9344";
++              rev = id & AR934X_REV_ID_REVISION_MASK;
++              break;
++
+       default:
+               panic("ath79: unknown SoC, id:0x%08x", id);
+       }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -271,6 +271,8 @@
+ #define AR724X_REV_ID_REVISION_MASK   0x3
++#define AR934X_REV_ID_REVISION_MASK     0xf
++
+ /*
+  * SPI block
+  */
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -29,6 +29,9 @@ enum ath79_soc_type {
+       ATH79_SOC_AR9132,
+       ATH79_SOC_AR9330,
+       ATH79_SOC_AR9331,
++      ATH79_SOC_AR9341,
++      ATH79_SOC_AR9342,
++      ATH79_SOC_AR9344,
+ };
+ extern enum ath79_soc_type ath79_soc;
+@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
+               ath79_soc == ATH79_SOC_AR9331);
+ }
++static inline int soc_is_ar9341(void)
++{
++      return (ath79_soc == ATH79_SOC_AR9341);
++}
++
++static inline int soc_is_ar9342(void)
++{
++      return (ath79_soc == ATH79_SOC_AR9342);
++}
++
++static inline int soc_is_ar9344(void)
++{
++      return (ath79_soc == ATH79_SOC_AR9344);
++}
++
++static inline int soc_is_ar934x(void)
++{
++      return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
++}
++
+ extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
diff --git a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..fd7976f
--- /dev/null
@@ -0,0 +1,194 @@
+From 783addfa256e79892f889e95ec5cda34f4e91eb7 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 20:36:32 +0100
+Subject: [PATCH 24/35] MIPS: ath79: add clock initialization code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/clock.c                        |   81 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |   53 +++++++++++++++
+ 2 files changed, 134 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -1,8 +1,11 @@
+ /*
+  *  Atheros AR71XX/AR724X/AR913X common routines
+  *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+  *
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(vo
+       ath79_uart_clk.rate = ath79_ref_clk.rate;
+ }
++static void __init ar934x_clocks_init(void)
++{
++      u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++      u32 cpu_pll, ddr_pll;
++      u32 bootstrap;
++
++      bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++      if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
++              ath79_ref_clk.rate = 40 * 1000 * 1000;
++      else
++              ath79_ref_clk.rate = 25 * 1000 * 1000;
++
++      pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
++      out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++                AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++                AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
++      nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
++             AR934X_PLL_CPU_CONFIG_NINT_MASK;
++      frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++             AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++      cpu_pll = nint * ath79_ref_clk.rate / ref_div;
++      cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
++      cpu_pll /= (1 << out_div);
++
++      pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
++      out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++                AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++                AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
++      nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
++             AR934X_PLL_DDR_CONFIG_NINT_MASK;
++      frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++             AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++      ddr_pll = nint * ath79_ref_clk.rate / ref_div;
++      ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
++      ddr_pll /= (1 << out_div);
++
++      clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
++
++      postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++                AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
++
++      if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
++              ath79_cpu_clk.rate = ath79_ref_clk.rate;
++      else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++              ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
++      else
++              ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++                AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
++
++      if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
++              ath79_ddr_clk.rate = ath79_ref_clk.rate;
++      else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++              ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
++      else
++              ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++                AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
++
++      if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
++              ath79_ahb_clk.rate = ath79_ref_clk.rate;
++      else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++              ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
++      else
++              ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
++
++      ath79_wdt_clk.rate = ath79_ref_clk.rate;
++      ath79_uart_clk.rate = ath79_ref_clk.rate;
++}
++
+ void __init ath79_clocks_init(void)
+ {
+       if (soc_is_ar71xx())
+@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
+               ar913x_clocks_init();
+       else if (soc_is_ar933x())
+               ar933x_clocks_init();
++      else if (soc_is_ar934x())
++              ar934x_clocks_init();
+       else
+               BUG();
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -151,6 +151,41 @@
+ #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT   15
+ #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK    0x7
++#define AR934X_PLL_CPU_CONFIG_REG             0x00
++#define AR934X_PLL_DDR_CONFIG_REG             0x04
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG               0x08
++
++#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT     0
++#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK      0x3f
++#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT      6
++#define AR934X_PLL_CPU_CONFIG_NINT_MASK               0x3f
++#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT    12
++#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK     0x1f
++#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT    19
++#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK     0x3
++
++#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT     0
++#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK      0x3ff
++#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT      10
++#define AR934X_PLL_DDR_CONFIG_NINT_MASK               0x3f
++#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT    16
++#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK     0x1f
++#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT    23
++#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK     0x7
++
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS    BIT(2)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS    BIT(3)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS    BIT(4)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT        5
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT        10
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT        15
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL        BIT(20)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL        BIT(21)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL        BIT(24)
++
+ /*
+  * USB_CONFIG block
+  */
+@@ -186,6 +221,8 @@
+ #define AR933X_RESET_REG_RESET_MODULE         0x1c
+ #define AR933X_RESET_REG_BOOTSTRAP            0xac
++#define AR934X_RESET_REG_BOOTSTRAP            0xb0
++
+ #define MISC_INT_ETHSW                        BIT(12)
+ #define MISC_INT_TIMER4                       BIT(10)
+ #define MISC_INT_TIMER3                       BIT(9)
+@@ -242,6 +279,22 @@
+ #define AR933X_BOOTSTRAP_REF_CLK_40   BIT(0)
++#define AR934X_BOOTSTRAP_SW_OPTION8   BIT(23)
++#define AR934X_BOOTSTRAP_SW_OPTION7   BIT(22)
++#define AR934X_BOOTSTRAP_SW_OPTION6   BIT(21)
++#define AR934X_BOOTSTRAP_SW_OPTION5   BIT(20)
++#define AR934X_BOOTSTRAP_SW_OPTION4   BIT(19)
++#define AR934X_BOOTSTRAP_SW_OPTION3   BIT(18)
++#define AR934X_BOOTSTRAP_SW_OPTION2   BIT(17)
++#define AR934X_BOOTSTRAP_SW_OPTION1   BIT(16)
++#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
++#define AR934X_BOOTSTRAP_PCIE_RC      BIT(6)
++#define AR934X_BOOTSTRAP_EJTAG_MODE   BIT(5)
++#define AR934X_BOOTSTRAP_REF_CLK_40   BIT(4)
++#define AR934X_BOOTSTRAP_BOOT_FROM_SPI        BIT(2)
++#define AR934X_BOOTSTRAP_SDRAM_DISABLED       BIT(1)
++#define AR934X_BOOTSTRAP_DDR1         BIT(0)
++
+ #define REV_ID_MAJOR_MASK             0xfff0
+ #define REV_ID_MAJOR_AR71XX           0x00a0
+ #define REV_ID_MAJOR_AR913X           0x00b0
diff --git a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..f406db9
--- /dev/null
@@ -0,0 +1,98 @@
+From c01b6005cfa2d762c2de33d5be2e82f91afaa66f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 20:53:47 +0100
+Subject: [PATCH 25/35] MIPS: ath79: add GPIO support code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/gpio.c                         |   47 +++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    1 +
+ 2 files changed, 47 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -1,9 +1,12 @@
+ /*
+  *  Atheros AR71XX/AR724X/AR913X GPIO API support
+  *
+- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(s
+       return 0;
+ }
++static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++      void __iomem *base = ath79_gpio_base;
++      unsigned long flags;
++
++      spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++      __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
++                   base + AR71XX_GPIO_REG_OE);
++
++      spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++
++      return 0;
++}
++
++static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
++                                      int value)
++{
++      void __iomem *base = ath79_gpio_base;
++      unsigned long flags;
++
++      spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++      if (value)
++              __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
++      else
++              __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
++
++      __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
++                   base + AR71XX_GPIO_REG_OE);
++
++      spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++
++      return 0;
++}
++
+ static struct gpio_chip ath79_gpio_chip = {
+       .label                  = "ath79",
+       .get                    = ath79_gpio_get_value,
+@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
+               ath79_gpio_count = AR913X_GPIO_COUNT;
+       else if (soc_is_ar933x())
+               ath79_gpio_count = AR933X_GPIO_COUNT;
++      else if (soc_is_ar934x())
++              ath79_gpio_count = AR934X_GPIO_COUNT;
+       else
+               BUG();
+       ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+       ath79_gpio_chip.ngpio = ath79_gpio_count;
++      if (soc_is_ar934x()) {
++              ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
++              ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
++      }
+       err = gpiochip_add(&ath79_gpio_chip);
+       if (err)
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -367,5 +367,6 @@
+ #define AR724X_GPIO_COUNT             18
+ #define AR913X_GPIO_COUNT             22
+ #define AR933X_GPIO_COUNT             30
++#define AR934X_GPIO_COUNT             23
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
new file mode 100644 (file)
index 0000000..144acac
--- /dev/null
@@ -0,0 +1,154 @@
+From e69d89040d4884ea4069352338f555694e65fe70 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 21:30:03 +0100
+Subject: [PATCH 26/35] MIPS: ath79: rework IP2/IP3 interrupt handling
+
+The current implementation assumes that flushing the
+DDR writeback buffer is required for IP2/IP3 interrupts,
+however this is not true for all SoCs.
+
+Use SoC specific IP2/IP3 handlers instead of flushing
+the buffers in the dispatcher code.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/irq.c |   92 ++++++++++++++++++++++++++++++++++++++-----------
+ 1 files changed, 72 insertions(+), 20 deletions(-)
+
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -1,7 +1,7 @@
+ /*
+  *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
+  *
+- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+  *  Parts of this file are based on Atheros' 2.6.15 BSP
+@@ -23,8 +23,8 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "common.h"
+-static unsigned int ath79_ip2_flush_reg;
+-static unsigned int ath79_ip3_flush_reg;
++static void (*ath79_ip2_handler)(void);
++static void (*ath79_ip3_handler)(void);
+ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+@@ -152,10 +152,8 @@ asmlinkage void plat_irq_dispatch(void)
+       if (pending & STATUSF_IP7)
+               do_IRQ(ATH79_CPU_IRQ_TIMER);
+-      else if (pending & STATUSF_IP2) {
+-              ath79_ddr_wb_flush(ath79_ip2_flush_reg);
+-              do_IRQ(ATH79_CPU_IRQ_IP2);
+-      }
++      else if (pending & STATUSF_IP2)
++              ath79_ip2_handler();
+       else if (pending & STATUSF_IP4)
+               do_IRQ(ATH79_CPU_IRQ_GE0);
+@@ -163,10 +161,8 @@ asmlinkage void plat_irq_dispatch(void)
+       else if (pending & STATUSF_IP5)
+               do_IRQ(ATH79_CPU_IRQ_GE1);
+-      else if (pending & STATUSF_IP3) {
+-              ath79_ddr_wb_flush(ath79_ip3_flush_reg);
+-              do_IRQ(ATH79_CPU_IRQ_USB);
+-      }
++      else if (pending & STATUSF_IP3)
++              ath79_ip3_handler();
+       else if (pending & STATUSF_IP6)
+               do_IRQ(ATH79_CPU_IRQ_MISC);
+@@ -175,22 +171,78 @@ asmlinkage void plat_irq_dispatch(void)
+               spurious_interrupt();
+ }
++/*
++ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
++ * these devices typically allocate coherent DMA memory, however the
++ * DMA controller may still have some unsynchronized data in the FIFO.
++ * Issue a flush in the handlers to ensure that the driver sees
++ * the update.
++ */
++static void ar71xx_ip2_handler(void)
++{
++      ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
++      do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar724x_ip2_handler(void)
++{
++      ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
++      do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar913x_ip2_handler(void)
++{
++      ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
++      do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar933x_ip2_handler(void)
++{
++      ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
++      do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar71xx_ip3_handler(void)
++{
++      ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
++      do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar724x_ip3_handler(void)
++{
++      ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
++      do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar913x_ip3_handler(void)
++{
++      ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
++      do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar933x_ip3_handler(void)
++{
++      ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
++      do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
+ void __init arch_init_irq(void)
+ {
+       if (soc_is_ar71xx()) {
+-              ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
+-              ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
++              ath79_ip2_handler = ar71xx_ip2_handler;
++              ath79_ip3_handler = ar71xx_ip3_handler;
+       } else if (soc_is_ar724x()) {
+-              ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
+-              ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
++              ath79_ip2_handler = ar724x_ip2_handler;
++              ath79_ip3_handler = ar724x_ip3_handler;
+       } else if (soc_is_ar913x()) {
+-              ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
+-              ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
++              ath79_ip2_handler = ar913x_ip2_handler;
++              ath79_ip3_handler = ar913x_ip3_handler;
+       } else if (soc_is_ar933x()) {
+-              ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
+-              ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
+-      } else
++              ath79_ip2_handler = ar933x_ip2_handler;
++              ath79_ip3_handler = ar933x_ip3_handler;
++      } else {
+               BUG();
++      }
+       cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
+       mips_cpu_irq_init();
diff --git a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..083ca33
--- /dev/null
@@ -0,0 +1,190 @@
+From 9db6021011556948d2d28d6957cee451bc2985aa Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 21:59:50 +0100
+Subject: [PATCH 27/35] MIPS: ath79: add IRQ handling code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/irq.c                          |   55 +++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |   25 +++++++++++
+ arch/mips/include/asm/mach-ath79/irq.h         |    6 ++-
+ 3 files changed, 83 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -1,10 +1,11 @@
+ /*
+  *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
+  *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+  *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
+- *  Parts of this file are based on Atheros' 2.6.15 BSP
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(v
+       if (soc_is_ar71xx() || soc_is_ar913x())
+               ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+-      else if (soc_is_ar724x() || soc_is_ar933x())
++      else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
+               ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+       else
+               BUG();
+@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(v
+       irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
+ }
++static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++      u32 status;
++
++      disable_irq_nosync(irq);
++
++      status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
++
++      if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
++              ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
++              generic_handle_irq(ATH79_IP2_IRQ(0));
++      } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
++              ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
++              generic_handle_irq(ATH79_IP2_IRQ(1));
++      } else {
++              spurious_interrupt();
++      }
++
++      enable_irq(irq);
++}
++
++static void ar934x_ip2_irq_init(void)
++{
++      int i;
++
++      for (i = ATH79_IP2_IRQ_BASE;
++           i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &dummy_irq_chip,
++                                       handle_level_irq);
++
++      irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
++}
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+       unsigned long pending;
+@@ -202,6 +236,11 @@ static void ar933x_ip2_handler(void)
+       do_IRQ(ATH79_CPU_IRQ_IP2);
+ }
++static void ar934x_ip2_handler(void)
++{
++      do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
+ static void ar71xx_ip3_handler(void)
+ {
+       ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
+@@ -226,6 +265,12 @@ static void ar933x_ip3_handler(void)
+       do_IRQ(ATH79_CPU_IRQ_USB);
+ }
++static void ar934x_ip3_handler(void)
++{
++      ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
++      do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
+ void __init arch_init_irq(void)
+ {
+       if (soc_is_ar71xx()) {
+@@ -240,6 +285,9 @@ void __init arch_init_irq(void)
+       } else if (soc_is_ar933x()) {
+               ath79_ip2_handler = ar933x_ip2_handler;
+               ath79_ip3_handler = ar933x_ip3_handler;
++      } else if (soc_is_ar934x()) {
++              ath79_ip2_handler = ar934x_ip2_handler;
++              ath79_ip3_handler = ar934x_ip3_handler;
+       } else {
+               BUG();
+       }
+@@ -247,4 +295,7 @@ void __init arch_init_irq(void)
+       cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
+       mips_cpu_irq_init();
+       ath79_misc_irq_init();
++
++      if (soc_is_ar934x())
++              ar934x_ip2_irq_init();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -92,6 +92,12 @@
+ #define AR933X_DDR_REG_FLUSH_USB      0x84
+ #define AR933X_DDR_REG_FLUSH_WMAC     0x88
++#define AR934X_DDR_REG_FLUSH_GE0      0x9c
++#define AR934X_DDR_REG_FLUSH_GE1      0xa0
++#define AR934X_DDR_REG_FLUSH_USB      0xa4
++#define AR934X_DDR_REG_FLUSH_PCIE     0xa8
++#define AR934X_DDR_REG_FLUSH_WMAC     0xac
++
+ /*
+  * PLL block
+  */
+@@ -222,6 +228,7 @@
+ #define AR933X_RESET_REG_BOOTSTRAP            0xac
+ #define AR934X_RESET_REG_BOOTSTRAP            0xb0
++#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+ #define MISC_INT_ETHSW                        BIT(12)
+ #define MISC_INT_TIMER4                       BIT(10)
+@@ -295,6 +302,24 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED       BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1         BIT(0)
++#define AR934X_PCIE_WMAC_INT_WMAC_MISC                BIT(0)
++#define AR934X_PCIE_WMAC_INT_WMAC_TX          BIT(1)
++#define AR934X_PCIE_WMAC_INT_WMAC_RXLP                BIT(2)
++#define AR934X_PCIE_WMAC_INT_WMAC_RXHP                BIT(3)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC          BIT(4)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC0         BIT(5)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC1         BIT(6)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC2         BIT(7)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC3         BIT(8)
++#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
++      (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
++       AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
++
++#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
++      (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
++       AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
++       AR934X_PCIE_WMAC_INT_PCIE_RC3)
++
+ #define REV_ID_MAJOR_MASK             0xfff0
+ #define REV_ID_MAJOR_AR71XX           0x00a0
+ #define REV_ID_MAJOR_AR913X           0x00b0
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -10,7 +10,7 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+ #define MIPS_CPU_IRQ_BASE     0
+-#define NR_IRQS                       46
++#define NR_IRQS                       48
+ #define ATH79_MISC_IRQ_BASE   8
+ #define ATH79_MISC_IRQ_COUNT  32
+@@ -19,6 +19,10 @@
+ #define ATH79_PCI_IRQ_COUNT   6
+ #define ATH79_PCI_IRQ(_x)     (ATH79_PCI_IRQ_BASE + (_x))
++#define ATH79_IP2_IRQ_BASE    (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
++#define ATH79_IP2_IRQ_COUNT   2
++#define ATH79_IP2_IRQ(_x)     (ATH79_IP2_IRQ_BASE + (_x))
++
+ #define ATH79_CPU_IRQ_IP2     (MIPS_CPU_IRQ_BASE + 2)
+ #define ATH79_CPU_IRQ_USB     (MIPS_CPU_IRQ_BASE + 3)
+ #define ATH79_CPU_IRQ_GE0     (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
new file mode 100644 (file)
index 0000000..dc9df92
--- /dev/null
@@ -0,0 +1,56 @@
+From da0f20f8a99de9193fc484a25d1f9edc913c98fd Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 10 Dec 2011 20:09:39 +0100
+Subject: [PATCH 28/35] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set}
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/common.c                       |    9 ++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    1 +
+ 2 files changed, 9 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -1,9 +1,12 @@
+ /*
+  *  Atheros AR71XX/AR724X/AR913X common routines
+  *
+- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
+               reg = AR913X_RESET_REG_RESET_MODULE;
+       else if (soc_is_ar933x())
+               reg = AR933X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar934x())
++              reg = AR934X_RESET_REG_RESET_MODULE;
+       else
+               BUG();
+@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
+               reg = AR913X_RESET_REG_RESET_MODULE;
+       else if (soc_is_ar933x())
+               reg = AR933X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar934x())
++              reg = AR934X_RESET_REG_RESET_MODULE;
+       else
+               BUG();
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -227,6 +227,7 @@
+ #define AR933X_RESET_REG_RESET_MODULE         0x1c
+ #define AR933X_RESET_REG_BOOTSTRAP            0xac
++#define AR934X_RESET_REG_RESET_MODULE         0x1c
+ #define AR934X_RESET_REG_BOOTSTRAP            0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
diff --git a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
new file mode 100644 (file)
index 0000000..db5ae61
--- /dev/null
@@ -0,0 +1,23 @@
+From 6b6803a249a27aa708bc5f24aa15270e30f3de61 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 10 Dec 2011 19:55:05 +0100
+Subject: [PATCH 29/35] MIPS: ath79: register UART device for AR934X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/dev-common.c |    3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
+       if (soc_is_ar71xx() ||
+           soc_is_ar724x() ||
+-          soc_is_ar913x()) {
++          soc_is_ar913x() ||
++          soc_is_ar934x()) {
+               ath79_uart_data[0].uartclk = clk_get_rate(clk);
+               platform_device_register(&ath79_uart_device);
+       } else if (soc_is_ar933x()) {
diff --git a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..ca7c928
--- /dev/null
@@ -0,0 +1,112 @@
+From 58b69cf52387a7351ec13b52d3d6a495fe611c29 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:07:23 +0100
+Subject: [PATCH 30/35] MIPS: ath79: add WMAC registration code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig                        |    2 +-
+ arch/mips/ath79/dev-wmac.c                     |   30 ++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    3 ++
+ 3 files changed, 32 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -86,7 +86,7 @@ config ATH79_DEV_USB
+       def_bool n
+ config ATH79_DEV_WMAC
+-      depends on (SOC_AR913X || SOC_AR933X)
++      depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+       def_bool n
+ endif
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -1,9 +1,12 @@
+ /*
+  *  Atheros AR913X/AR933X SoC built-in WMAC device support
+  *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+  *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+  *
++ *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
++ *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resour
+               /* .start and .end fields are filled dynamically */
+               .flags  = IORESOURCE_MEM,
+       }, {
+-              .start  = ATH79_CPU_IRQ_IP2,
+-              .end    = ATH79_CPU_IRQ_IP2,
++              /* .start and .end fields are filled dynamically */
+               .flags  = IORESOURCE_IRQ,
+       },
+ };
+@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(voi
+       ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+       ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
++      ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
++      ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+ }
+@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(voi
+       ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+       ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
++      ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
++      ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+       t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+       if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(voi
+       ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
++static void ar934x_wmac_setup(void)
++{
++      u32 t;
++
++      ath79_wmac_device.name = "ar934x_wmac";
++
++      ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
++      ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
++      ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++      ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++
++      t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++      if (t & AR934X_BOOTSTRAP_REF_CLK_40)
++              ath79_wmac_data.is_clk_25mhz = false;
++      else
++              ath79_wmac_data.is_clk_25mhz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data)
+ {
+       if (soc_is_ar913x())
+               ar913x_wmac_setup();
+       else if (soc_is_ar933x())
+               ar933x_wmac_setup();
++      else if (soc_is_ar934x())
++              ar934x_wmac_setup();
+       else
+               BUG();
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -61,6 +61,9 @@
+ #define AR933X_EHCI_BASE      0x1b000000
+ #define AR933X_EHCI_SIZE      0x1000
++#define AR934X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
++#define AR934X_WMAC_SIZE      0x20000
++
+ /*
+  * DDR_CTRL block
+  */
diff --git a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..7ac304f
--- /dev/null
@@ -0,0 +1,107 @@
+From 2d832612094b5592641364773c5ab2a3658f7120 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 18:34:13 +0100
+Subject: [PATCH 31/35] MIPS: ath79: add USB platform setup code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/dev-usb.c                      |   28 +++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |   35 ++++++++++++++++++++++++
+ 2 files changed, 63 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -180,6 +180,32 @@ static void __init ar933x_usb_setup(void
+       platform_device_register(&ath79_ehci_device);
+ }
++static void __init ar934x_usb_setup(void)
++{
++      u32 bootstrap;
++
++      bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++      if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++              return;
++
++      ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
++      udelay(1000);
++
++      ath79_device_reset_set(AR934X_RESET_USB_PHY);
++      udelay(1000);
++
++      ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
++      udelay(1000);
++
++      ath79_device_reset_set(AR934X_RESET_USB_HOST);
++      udelay(1000);
++
++      ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
++      ath79_ehci_resources[0].end = AR934X_EHCI_BASE + AR934X_EHCI_SIZE - 1;
++      ath79_ehci_device.name = "ar934x-ehci";
++      platform_device_register(&ath79_ehci_device);
++}
++
+ void __init ath79_register_usb(void)
+ {
+       if (soc_is_ar71xx())
+@@ -192,6 +218,8 @@ void __init ath79_register_usb(void)
+               ar913x_usb_setup();
+       else if (soc_is_ar933x())
+               ar933x_usb_setup();
++      else if (soc_is_ar934x())
++              ar934x_usb_setup();
+       else
+               BUG();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -63,6 +63,8 @@
+ #define AR934X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE      0x20000
++#define AR934X_EHCI_BASE      0x1b000000
++#define AR934X_EHCI_SIZE      0x1000
+ /*
+  * DDR_CTRL block
+@@ -288,6 +290,39 @@
+ #define AR933X_RESET_USB_PHY          BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE  BIT(3)
++#define AR934X_RESET_HOST             BIT(31)
++#define AR934X_RESET_SLIC             BIT(30)
++#define AR934X_RESET_HDMA             BIT(29)
++#define AR934X_RESET_EXTERNAL         BIT(28)
++#define AR934X_RESET_RTC              BIT(27)
++#define AR934X_RESET_PCIE_EP_INT      BIT(26)
++#define AR934X_RESET_CHKSUM_ACC               BIT(25)
++#define AR934X_RESET_FULL_CHIP                BIT(24)
++#define AR934X_RESET_GE1_MDIO         BIT(23)
++#define AR934X_RESET_GE0_MDIO         BIT(22)
++#define AR934X_RESET_CPU_NMI          BIT(21)
++#define AR934X_RESET_CPU_COLD         BIT(20)
++#define AR934X_RESET_HOST_RESET_INT   BIT(19)
++#define AR934X_RESET_PCIE_EP          BIT(18)
++#define AR934X_RESET_UART1            BIT(17)
++#define AR934X_RESET_DDR              BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF            BIT(14)
++#define AR934X_RESET_GE1_MAC          BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG        BIT(12)
++#define AR934X_RESET_USB_PHY_ANALOG   BIT(11)
++#define AR934X_RESET_HOST_DMA_INT     BIT(10)
++#define AR934X_RESET_GE0_MAC          BIT(9)
++#define AR934X_RESET_ETH_SIWTCH               BIT(8)
++#define AR934X_RESET_PCIE_PHY         BIT(7)
++#define AR934X_RESET_PCIE             BIT(6)
++#define AR934X_RESET_USB_HOST         BIT(5)
++#define AR934X_RESET_USB_PHY          BIT(4)
++#define AR934X_RESET_USBSUS_OVERRIDE  BIT(3)
++#define AR934X_RESET_LUT              BIT(2)
++#define AR934X_RESET_MBOX             BIT(1)
++#define AR934X_RESET_I2S              BIT(0)
++
+ #define AR933X_BOOTSTRAP_REF_CLK_40   BIT(0)
+ #define AR934X_BOOTSTRAP_SW_OPTION8   BIT(23)
diff --git a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
new file mode 100644 (file)
index 0000000..62e95df
--- /dev/null
@@ -0,0 +1,62 @@
+From f299f36542f81f05cff7cdebb50abde202faf6df Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Dec 2011 10:04:18 +0100
+Subject: [PATCH 32/35] MIPS: ath79: add PCI_AR724X Kconfig symbol
+
+The AR724X specific PCI code can be used for the
+AR934X SoCs, however it can be selected only if
+SOC_AR724X is set.
+
+Introduce a new Kconfig symbol in order to be able
+to use the code for AR934X as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig                |    4 ++++
+ arch/mips/include/asm/mach-ath79/pci.h |    2 +-
+ arch/mips/pci/Makefile                 |    2 +-
+ 3 files changed, 6 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -59,6 +59,7 @@ config SOC_AR724X
+       select USB_ARCH_HAS_EHCI
+       select USB_ARCH_HAS_OHCI
+       select HW_HAS_PCI
++      select PCI_AR724X if PCI
+       def_bool n
+ config SOC_AR913X
+@@ -73,6 +74,9 @@ config SOC_AR934X
+       select USB_ARCH_HAS_EHCI
+       def_bool n
++config PCI_AR724X
++      def_bool n
++
+ config ATH79_DEV_GPIO_BUTTONS
+       def_bool n
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void);
+ static inline int ar71xx_pcibios_init(void) { return 0 };
+ #endif
+-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
++#if defined(CONFIG_PCI_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+ static inline int ar724x_pcibios_init(int irq) { return 0 };
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX)                += pci-bcm63xx.o
+                                       ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
+ obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
+-obj-$(CONFIG_SOC_AR724X)      += pci-ar724x.o
++obj-$(CONFIG_PCI_AR724X)      += pci-ar724x.o
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
new file mode 100644 (file)
index 0000000..7f168b3
--- /dev/null
@@ -0,0 +1,58 @@
+From e30d942814a606c5258c7adafc6bbb49836573e9 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Dec 2011 10:13:08 +0100
+Subject: [PATCH 33/35] MIPS: ath79: add PCI registration code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig |    2 ++
+ arch/mips/ath79/pci.c   |   13 ++++++++++++-
+ 2 files changed, 14 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -72,6 +72,8 @@ config SOC_AR933X
+ config SOC_AR934X
+       select USB_ARCH_HAS_EHCI
++      select HW_HAS_PCI
++      select PCI_AR724X if PCI
+       def_bool n
+ config PCI_AR724X
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -14,6 +14,7 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+ #include <asm/mach-ath79/pci.h>
+@@ -57,7 +58,9 @@ int __init pcibios_map_irq(const struct
+               if (soc_is_ar71xx()) {
+                       ath79_pci_irq_map = ar71xx_pci_irq_map;
+                       ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
+-              } else if (soc_is_ar724x()) {
++              } else if (soc_is_ar724x() ||
++                         soc_is_ar9342() ||
++                         soc_is_ar9344()) {
+                       ath79_pci_irq_map = ar724x_pci_irq_map;
+                       ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+               } else {
+@@ -115,5 +118,13 @@ int __init ath79_register_pci(void)
+       if (soc_is_ar724x())
+               return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
++      if (soc_is_ar9342() || soc_is_ar9344()) {
++              u32 bootstrap;
++
++              bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++              if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
++                      return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
++      }
++
+       return -ENODEV;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
new file mode 100644 (file)
index 0000000..3f6c3e2
--- /dev/null
@@ -0,0 +1,213 @@
+From a01e8727327cf0fb6382ca8700a3a3f73d93202a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:23:02 +0100
+Subject: [PATCH 34/35] MIPS: ath79: add initial support for the Atheros DB120 board
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig      |   12 +++
+ arch/mips/ath79/Makefile     |    1 +
+ arch/mips/ath79/mach-db120.c |  155 ++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ath79/machtypes.h  |    1 +
+ 4 files changed, 169 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/ath79/mach-db120.c
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP81 reference board.
++config ATH79_MACH_DB120
++      bool "Atheros DB120 reference board"
++      select SOC_AR934X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      help
++        Say 'Y' here if you want your kernel to support the
++        Atheros DB120 reference board.
++
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -28,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC)         += dev-wma
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_PB44)         += mach-pb44.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)      += mach-ubnt-xm.o
+--- /dev/null
++++ b/arch/mips/ath79/mach-db120.c
+@@ -0,0 +1,155 @@
++/*
++ * Atheros DB120 reference board support
++ *
++ * Copyright (c) 2011 Qualcomm Atheros
++ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted (subject to the limitations in the
++ * disclaimer below) provided that the following conditions are met:
++ *
++ *  * Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ *
++ *  * Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the
++ *    distribution.
++ *
++ *  * Neither the name of Qualcomm Atheros nor the names of its
++ *    contributors may be used to endorse or promote products derived
++ *    from this software without specific prior written permission.
++ *
++ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
++ * GRANTED BY THIS LICENSE.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
++ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
++ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
++ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/pci.h>
++#include <linux/ath9k_platform.h>
++
++#include "machtypes.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "pci.h"
++
++#define DB120_GPIO_LED_WLAN_5G                12
++#define DB120_GPIO_LED_WLAN_2G                13
++#define DB120_GPIO_LED_STATUS         14
++#define DB120_GPIO_LED_WPS            15
++
++#define DB120_GPIO_BTN_WPS            16
++
++#define DB120_KEYS_POLL_INTERVAL      20      /* msecs */
++#define DB120_KEYS_DEBOUNCE_INTERVAL  (3 * DB120_KEYS_POLL_INTERVAL)
++
++#define DB120_WMAC_CALDATA_OFFSET 0x1000
++#define DB120_PCIE_CALDATA_OFFSET 0x5000
++
++static struct gpio_led db120_leds_gpio[] __initdata = {
++      {
++              .name           = "db120:green:status",
++              .gpio           = DB120_GPIO_LED_STATUS,
++              .active_low     = 1,
++      },
++      {
++              .name           = "db120:green:wps",
++              .gpio           = DB120_GPIO_LED_WPS,
++              .active_low     = 1,
++      },
++      {
++              .name           = "db120:green:wlan-5g",
++              .gpio           = DB120_GPIO_LED_WLAN_5G,
++              .active_low     = 1,
++      },
++      {
++              .name           = "db120:green:wlan-2g",
++              .gpio           = DB120_GPIO_LED_WLAN_2G,
++              .active_low     = 1,
++      },
++};
++
++static struct gpio_keys_button db120_gpio_keys[] __initdata = {
++      {
++              .desc           = "WPS button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = DB120_GPIO_BTN_WPS,
++              .active_low     = 1,
++      },
++};
++
++static struct spi_board_info db120_spi_info[] = {
++      {
++              .bus_num        = 0,
++              .chip_select    = 0,
++              .max_speed_hz   = 25000000,
++              .modalias       = "s25sl064a",
++      }
++};
++
++static struct ath79_spi_platform_data db120_spi_data = {
++      .bus_num        = 0,
++      .num_chipselect = 1,
++};
++
++#ifdef CONFIG_PCI
++static struct ath9k_platform_data db120_ath9k_data;
++
++static int db120_pci_plat_dev_init(struct pci_dev *dev)
++{
++      switch (PCI_SLOT(dev->devfn)) {
++      case 0:
++              dev->dev.platform_data = &db120_ath9k_data;
++              break;
++      }
++
++      return 0;
++}
++
++static void __init db120_pci_init(u8 *eeprom)
++{
++      memcpy(db120_ath9k_data.eeprom_data, eeprom,
++             sizeof(db120_ath9k_data.eeprom_data));
++
++      ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
++      ath79_register_pci();
++}
++#else
++static inline void db120_pci_init(void) {}
++#endif /* CONFIG_PCI */
++
++static void __init db120_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
++                               db120_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(db120_gpio_keys),
++                                      db120_gpio_keys);
++      ath79_register_spi(&db120_spi_data, db120_spi_info,
++                         ARRAY_SIZE(db120_spi_info));
++      ath79_register_usb();
++      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++      db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
++           db120_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -18,6 +18,7 @@ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
++      ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+ };
diff --git a/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch b/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch
new file mode 100644 (file)
index 0000000..d84bf37
--- /dev/null
@@ -0,0 +1,41 @@
+From cbf8930fe259777fb746f0387bf821729061c122 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 22:09:20 +0100
+Subject: [PATCH 35/35] USB: ehci-ath79: add device_id entry for the AR934X SoCs
+
+Also make the USB_EHCI_ATH79 selectable for the AR934X SoCs.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+Cc: Alan Stern <stern@rowland.harvard.edu>
+Cc: Greg Kroah-Hartman <gregkh@suse.de>
+Cc: linux-usb@vger.kernel.org
+---
+ drivers/usb/host/Kconfig      |    2 +-
+ drivers/usb/host/ehci-ath79.c |    4 ++++
+ 2 files changed, 5 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -219,7 +219,7 @@ config USB_CNS3XXX_EHCI
+ config USB_EHCI_ATH79
+       bool "EHCI support for AR7XXX/AR9XXX SoCs"
+-      depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
++      depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X || SOC_AR934X)
+       select USB_EHCI_ROOT_HUB_TT
+       default y
+       ---help---
+--- a/drivers/usb/host/ehci-ath79.c
++++ b/drivers/usb/host/ehci-ath79.c
+@@ -37,6 +37,10 @@ static const struct platform_device_id e
+               .driver_data    = EHCI_ATH79_IP_V2,
+       },
+       {
++              .name           = "ar934x-ehci",
++              .driver_data    = EHCI_ATH79_IP_V2,
++      },
++      {
+               /* terminating entry */
+       },
+ };
diff --git a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch
new file mode 100644 (file)
index 0000000..c2681f9
--- /dev/null
@@ -0,0 +1,42 @@
+From 48b7e765e6e097d20d809fadd17a4355d26ad6d5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:06:35 +0100
+Subject: [PATCH 1/7] spi/ath79: add delay between SCK changes
+
+The driver uses the "as fast as it can" approach
+to drive the SCK signal. However this does not
+work with certain low speed SPI chips (e.g. the
+PCF2123 RTC chip). Add per-bit slowdowns in order
+to be able to use  the driver with such chips as
+well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c |    8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -52,6 +52,12 @@ static inline struct ath79_spi *ath79_sp
+       return spi_master_get_devdata(spi->master);
+ }
++static inline void ath79_spi_delay(unsigned nsecs)
++{
++      if (nsecs)
++              ndelay(nsecs);
++}
++
+ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
+ {
+       struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+@@ -184,7 +190,9 @@ static u32 ath79_spi_txrx_mode0(struct s
+               /* setup MSB (to slave) on trailing edge */
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
++              ath79_spi_delay(nsecs);
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
++              ath79_spi_delay(nsecs);
+               word <<= 1;
+       }
diff --git a/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
new file mode 100644 (file)
index 0000000..0b36ab6
--- /dev/null
@@ -0,0 +1,20 @@
+From 0ad8cbbb978bc01de08eadd3357ea188302b83ce Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:33:41 +0100
+Subject: [PATCH 2/7] spi/ath79: add missing HIGH->LOW SCK transition
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -193,6 +193,7 @@ static u32 ath79_spi_txrx_mode0(struct s
+               ath79_spi_delay(nsecs);
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+               ath79_spi_delay(nsecs);
++              ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+               word <<= 1;
+       }
diff --git a/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch
new file mode 100644 (file)
index 0000000..a2391be
--- /dev/null
@@ -0,0 +1,30 @@
+From 7385ff2cb72d6a0107890760466b9564aa5204c1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:03:28 +0100
+Subject: [PATCH 3/7] spi/ath79: remove superfluous chip select code
+
+The spi_bitbang driver calls the chipselect function
+of the driver from spi_bitbang_setup in order to
+deselect the given SPI chip, so we don't have to
+initialize the CS line here.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c |    6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -121,12 +121,6 @@ static int ath79_spi_setup_cs(struct spi
+                       gpio_free(cdata->gpio);
+                       return status;
+               }
+-      } else {
+-              if (spi->mode & SPI_CS_HIGH)
+-                      sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+-              else
+-                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+-              ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+       return 0;
diff --git a/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch
new file mode 100644 (file)
index 0000000..1f607fd
--- /dev/null
@@ -0,0 +1,56 @@
+From c5bfb0c760a5d8de7ffc3a6acfb8c782be6af1a5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:04:21 +0100
+Subject: [PATCH 4/7] spi/ath79: use gpio_request_one
+
+Use gpio_request_one() instead of multiple gpiolib calls.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c |   26 +++++++++++++-------------
+ 1 files changed, 13 insertions(+), 13 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -93,6 +93,7 @@ static int ath79_spi_setup_cs(struct spi
+ {
+       struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+       struct ath79_spi_controller_data *cdata;
++      int status;
+       cdata = spi->controller_data;
+       if (spi->chip_select && !cdata)
+@@ -108,22 +109,21 @@ static int ath79_spi_setup_cs(struct spi
+       /* TODO: setup speed? */
+       ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
++      status = 0;
+       if (spi->chip_select) {
+-              int status = 0;
++              unsigned long flags;
+-              status = gpio_request(cdata->gpio, dev_name(&spi->dev));
+-              if (status)
+-                      return status;
+-
+-              status = gpio_direction_output(cdata->gpio,
+-                                             spi->mode & SPI_CS_HIGH);
+-              if (status) {
+-                      gpio_free(cdata->gpio);
+-                      return status;
+-              }
++              flags = GPIOF_DIR_OUT;
++              if (spi->mode & SPI_CS_HIGH)
++                      flags |= GPIOF_INIT_HIGH;
++              else
++                      flags |= GPIOF_INIT_LOW;
++
++              status = gpio_request_one(cdata->gpio, flags,
++                                        dev_name(&spi->dev));
+       }
+-      return 0;
++      return status;
+ }
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
diff --git a/target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch b/target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch
new file mode 100644 (file)
index 0000000..ce98ad8
--- /dev/null
@@ -0,0 +1,98 @@
+From 4518ae06e5fc953abfd9c2b66c6155fc2b2696ce Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:00:46 +0100
+Subject: [PATCH 5/7] spi/ath79: introduce ath79_spi_{en,dis}able helpers
+
+---
+ drivers/spi/spi-ath79.c |   41 +++++++++++++++++++++++++----------------
+ 1 files changed, 25 insertions(+), 16 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -89,16 +89,8 @@ static void ath79_spi_chipselect(struct
+ }
+-static int ath79_spi_setup_cs(struct spi_device *spi)
++static void ath79_spi_enable(struct ath79_spi *sp)
+ {
+-      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+-      struct ath79_spi_controller_data *cdata;
+-      int status;
+-
+-      cdata = spi->controller_data;
+-      if (spi->chip_select && !cdata)
+-              return -EINVAL;
+-
+       /* enable GPIO mode */
+       ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+@@ -108,6 +100,24 @@ static int ath79_spi_setup_cs(struct spi
+       /* TODO: setup speed? */
+       ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
++}
++
++static void ath79_spi_disable(struct ath79_spi *sp)
++{
++      /* restore CTRL register */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
++      /* disable GPIO mode */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++}
++
++static int ath79_spi_setup_cs(struct spi_device *spi)
++{
++      struct ath79_spi_controller_data *cdata;
++      int status;
++
++      cdata = spi->controller_data;
++      if (spi->chip_select && !cdata)
++              return -EINVAL;
+       status = 0;
+       if (spi->chip_select) {
+@@ -128,17 +138,10 @@ static int ath79_spi_setup_cs(struct spi
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+-
+       if (spi->chip_select) {
+               struct ath79_spi_controller_data *cdata = spi->controller_data;
+               gpio_free(cdata->gpio);
+       }
+-
+-      /* restore CTRL register */
+-      ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+-      /* disable GPIO mode */
+-      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+ }
+ static int ath79_spi_setup(struct spi_device *spi)
+@@ -242,13 +245,15 @@ static __devinit int ath79_spi_probe(str
+               goto err_put_master;
+       }
++      ath79_spi_enable(sp);
+       ret = spi_bitbang_start(&sp->bitbang);
+       if (ret)
+-              goto err_unmap;
++              goto err_disable;
+       return 0;
+-err_unmap:
++err_disable:
++      ath79_spi_disable(sp);
+       iounmap(sp->base);
+ err_put_master:
+       platform_set_drvdata(pdev, NULL);
+@@ -262,6 +267,7 @@ static __devexit int ath79_spi_remove(st
+       struct ath79_spi *sp = platform_get_drvdata(pdev);
+       spi_bitbang_stop(&sp->bitbang);
++      ath79_spi_disable(sp);
+       iounmap(sp->base);
+       platform_set_drvdata(pdev, NULL);
+       spi_master_put(sp->bitbang.master);
diff --git a/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch
new file mode 100644 (file)
index 0000000..5ba3037
--- /dev/null
@@ -0,0 +1,45 @@
+From 1025bfbe327b3f9f7227e781c71751d5251803cb Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:19:32 +0100
+Subject: [PATCH 6/7] spi/ath79: add shutdown handler
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c |   12 +++++++++++-
+ 1 files changed, 11 insertions(+), 1 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -262,7 +262,7 @@ err_put_master:
+       return ret;
+ }
+-static __devexit int ath79_spi_remove(struct platform_device *pdev)
++static void __ath79_spi_remove(struct platform_device *pdev)
+ {
+       struct ath79_spi *sp = platform_get_drvdata(pdev);
+@@ -271,13 +271,23 @@ static __devexit int ath79_spi_remove(st
+       iounmap(sp->base);
+       platform_set_drvdata(pdev, NULL);
+       spi_master_put(sp->bitbang.master);
++}
++static __devexit int ath79_spi_remove(struct platform_device *pdev)
++{
++      __ath79_spi_remove(pdev);
+       return 0;
+ }
++static void ath79_spi_shutdown(struct platform_device *pdev)
++{
++      __ath79_spi_remove(pdev);
++}
++
+ static struct platform_driver ath79_spi_driver = {
+       .probe          = ath79_spi_probe,
+       .remove         = __devexit_p(ath79_spi_remove),
++      .shutdown       = ath79_spi_shutdown,
+       .driver         = {
+               .name   = DRV_NAME,
+               .owner  = THIS_MODULE,
diff --git a/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch
new file mode 100644 (file)
index 0000000..af96f55
--- /dev/null
@@ -0,0 +1,164 @@
+From b875f877d06acb852342636db4c3d1e6c9fe01ba Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:25:11 +0100
+Subject: [PATCH 7/7] spi/ath79: make chipselect logic more flexible
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ .../include/asm/mach-ath79/ath79_spi_platform.h    |    8 ++-
+ drivers/spi/spi-ath79.c                            |   65 +++++++++++--------
+ 2 files changed, 45 insertions(+), 28 deletions(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
+       unsigned        num_chipselect;
+ };
++enum ath79_spi_cs_type {
++      ATH79_SPI_CS_TYPE_INTERNAL,
++      ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+-      unsigned        gpio;
++      enum ath79_spi_cs_type cs_type;
++      unsigned cs_line;
+ };
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -30,6 +30,8 @@
+ #define DRV_NAME      "ath79-spi"
++#define ATH79_SPI_CS_LINE_MAX 2
++
+ struct ath79_spi {
+       struct spi_bitbang      bitbang;
+       u32                     ioc_base;
+@@ -62,6 +64,7 @@ static void ath79_spi_chipselect(struct
+ {
+       struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+       int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++      struct ath79_spi_controller_data *cdata = spi->controller_data;
+       if (is_active) {
+               /* set initial clock polarity */
+@@ -73,20 +76,21 @@ static void ath79_spi_chipselect(struct
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+-      if (spi->chip_select) {
+-              struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+-              /* SPI is normally active-low */
+-              gpio_set_value(cdata->gpio, cs_high);
+-      } else {
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
+               if (cs_high)
+-                      sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+               else
+-                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+-      }
++              break;
++      case ATH79_SPI_CS_TYPE_GPIO:
++              /* SPI is normally active-low */
++              gpio_set_value(cdata->cs_line, cs_high);
++              break;
++      }
+ }
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -113,24 +117,30 @@ static void ath79_spi_disable(struct ath
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+       struct ath79_spi_controller_data *cdata;
++      unsigned long flags;
+       int status;
+       cdata = spi->controller_data;
+-      if (spi->chip_select && !cdata)
++      if (!cdata)
+               return -EINVAL;
+       status = 0;
+-      if (spi->chip_select) {
+-              unsigned long flags;
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
++              if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++                      status = -EINVAL;
++              break;
++      case ATH79_SPI_CS_TYPE_GPIO:
+               flags = GPIOF_DIR_OUT;
+               if (spi->mode & SPI_CS_HIGH)
+                       flags |= GPIOF_INIT_HIGH;
+               else
+                       flags |= GPIOF_INIT_LOW;
+-              status = gpio_request_one(cdata->gpio, flags,
++              status = gpio_request_one(cdata->cs_line, flags,
+                                         dev_name(&spi->dev));
++              break;
+       }
+       return status;
+@@ -138,9 +148,15 @@ static int ath79_spi_setup_cs(struct spi
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-      if (spi->chip_select) {
+-              struct ath79_spi_controller_data *cdata = spi->controller_data;
+-              gpio_free(cdata->gpio);
++      struct ath79_spi_controller_data *cdata = spi->controller_data;
++
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
++              /* nothing to do */
++              break;
++      case ATH79_SPI_CS_TYPE_GPIO:
++              gpio_free(cdata->cs_line);
++              break;
+       }
+ }
+@@ -206,6 +222,10 @@ static __devinit int ath79_spi_probe(str
+       struct resource *r;
+       int ret;
++      pdata = pdev->dev.platform_data;
++      if (!pdata)
++              return -EINVAL;
++
+       master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+       if (master == NULL) {
+               dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -215,17 +235,10 @@ static __devinit int ath79_spi_probe(str
+       sp = spi_master_get_devdata(master);
+       platform_set_drvdata(pdev, sp);
+-      pdata = pdev->dev.platform_data;
+-
+       master->setup = ath79_spi_setup;
+       master->cleanup = ath79_spi_cleanup;
+-      if (pdata) {
+-              master->bus_num = pdata->bus_num;
+-              master->num_chipselect = pdata->num_chipselect;
+-      } else {
+-              master->bus_num = -1;
+-              master->num_chipselect = 1;
+-      }
++      master->bus_num = pdata->bus_num;
++      master->num_chipselect = pdata->num_chipselect;
+       sp->bitbang.master = spi_master_get(master);
+       sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch b/target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch
new file mode 100644 (file)
index 0000000..ed7b360
--- /dev/null
@@ -0,0 +1,105 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
++static struct ath79_spi_controller_data ap121_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ap121_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l1606e",
++              .controller_data = &ap121_spi0_data,
+       }
+ };
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
+       }
+ };
++static struct ath79_spi_controller_data ap81_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ap81_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .controller_data = &ap81_spi0_data,
+       }
+ };
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -95,12 +95,18 @@ static struct gpio_keys_button db120_gpi
+       },
+ };
++static struct ath79_spi_controller_data db120_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info db120_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "s25sl064a",
++              .controller_data = &db120_spi0_data,
+       }
+ };
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
+       }
+ };
++static struct ath79_spi_controller_data pb44_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .controller_data = &pb44_spi0_data,
+       },
+ };
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
++static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
++       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++       .cs_line = 0,
++};
++
+ static struct spi_board_info ubnt_xm_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l6405d",
++              .controller_data = &ubnt_xm_spi0_data,
+       }
+ };
diff --git a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch b/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch
new file mode 100644 (file)
index 0000000..ca0d3cc
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void)
+       if (soc_is_ar71xx())
+               ath79_gpio_count = AR71XX_GPIO_COUNT;
+-      else if (soc_is_ar724x())
+-              ath79_gpio_count = AR724X_GPIO_COUNT;
++      else if (soc_is_ar7240())
++              ath79_gpio_count = AR7240_GPIO_COUNT;
++      else if (soc_is_ar7241() || soc_is_ar7242())
++              ath79_gpio_count = AR7241_GPIO_COUNT;
+       else if (soc_is_ar913x())
+               ath79_gpio_count = AR913X_GPIO_COUNT;
+       else if (soc_is_ar933x())
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -428,7 +428,8 @@
+ #define AR71XX_GPIO_REG_FUNC          0x28
+ #define AR71XX_GPIO_COUNT             16
+-#define AR724X_GPIO_COUNT             18
++#define AR7240_GPIO_COUNT             18
++#define AR7241_GPIO_COUNT             20
+ #define AR913X_GPIO_COUNT             22
+ #define AR933X_GPIO_COUNT             30
+ #define AR934X_GPIO_COUNT             23
diff --git a/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch b/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch
new file mode 100644 (file)
index 0000000..9438844
--- /dev/null
@@ -0,0 +1,12 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,8 +62,8 @@ static void __init ar913x_wmac_setup(voi
+ static int ar933x_wmac_reset(void)
+ {
+-      ath79_device_reset_clear(AR933X_RESET_WMAC);
+       ath79_device_reset_set(AR933X_RESET_WMAC);
++      ath79_device_reset_clear(AR933X_RESET_WMAC);
+       return 0;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch b/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch
new file mode 100644 (file)
index 0000000..a3d0498
--- /dev/null
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -16,13 +16,13 @@
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
+ int ar71xx_pcibios_init(void);
+ #else
+-static inline int ar71xx_pcibios_init(void) { return 0 };
++static inline int ar71xx_pcibios_init(void) { return 0; }
+ #endif
+ #if defined(CONFIG_PCI_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+-static inline int ar724x_pcibios_init(int irq) { return 0 };
++static inline int ar724x_pcibios_init(int irq) { return 0; }
+ #endif
+ #endif /* __ASM_MACH_ATH79_PCI_H */
diff --git a/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch
new file mode 100644 (file)
index 0000000..36e30c2
--- /dev/null
@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -29,6 +29,66 @@ struct physmap_flash_info {
+       struct map_info         map[MAX_RESOURCES];
+ };
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++      return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++      map_word ret;
++
++      physmap_lock(map);
++      ret = inline_map_read(map, ofs);
++      physmap_unlock(map);
++
++      return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++                                   unsigned long ofs)
++{
++      physmap_lock(map);
++      inline_map_write(map, d, ofs);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++                                       unsigned long from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_from(map, to, from, len);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++                                     const void *from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_to(map, to, from, len);
++      physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+       struct physmap_flash_info *info;
+@@ -141,6 +201,13 @@ static int physmap_flash_probe(struct pl
+               simple_map_init(&info->map[i]);
++              if (physmap_data->lock && physmap_data->unlock) {
++                      info->map[i].read = physmap_flash_read_lock;
++                      info->map[i].write = physmap_flash_write_lock;
++                      info->map[i].copy_from = physmap_flash_copy_from_lock;
++                      info->map[i].copy_to = physmap_flash_copy_to_lock;
++              }
++
+               probe_type = rom_probe_types;
+               if (physmap_data->probe_type == NULL) {
+                       for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -26,6 +26,8 @@ struct physmap_flash_data {
+       unsigned int            width;
+       int                     (*init)(struct platform_device *);
+       void                    (*exit)(struct platform_device *);
++      void                    (*lock)(struct platform_device *);
++      void                    (*unlock)(struct platform_device *);
+       void                    (*set_vpp)(struct platform_device *, int);
+       unsigned int            nr_parts;
+       unsigned int            pfow_base;
diff --git a/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch
new file mode 100644 (file)
index 0000000..246abd5
--- /dev/null
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160    0x2782
+ #define SST39VF1601   0x234b
+ #define SST39VF3201   0x235b
++#define SST39VF6401B  0x236d
+ #define SST39WF1601   0x274b
+ #define SST39WF1602   0x274a
+ #define SST39LF512    0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+                       ERASEINFO(0x10000,64),
+               }
+       }, {
++              .mfr_id         = CFI_MFR_SST,
++              .dev_id         = SST39VF6401B,
++              .name           = "SST 39VF6401B",
++              .devtypes       = CFI_DEVICETYPE_X16,
++              .uaddr          = MTD_UADDR_0xAAAA_0x5555,
++              .dev_size       = SIZE_8MiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x10000,128)
++              }
++      }, {
+               .mfr_id         = CFI_MFR_ST,
+               .dev_id         = M29F800AB,
+               .name           = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644 (file)
index 0000000..9ed0598
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str
+                       break;
+               }
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, datum))
++                      goto enable_xip;
+               /* Latency issues. Drop the lock, wait a while and retry */
+               UDELAY(map, chip, adr, 1);
+@@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str
+               ret = -EIO;
+       }
++
++ enable_xip:
+       xip_enable(map, chip, adr);
+  op_done:
+       chip->state = FL_READY;
+@@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru
+       return 0;
+ }
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, map_word_ff(map)))
++                      goto op_done;
+               if (time_after(jiffies, timeo)) {
+                       printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct
+               ret = -EIO;
+       }
++ op_done:
+       chip->state = FL_READY;
+       xip_enable(map, chip, adr);
+       put_chip(map, chip, adr);
+@@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr)) {
++              if (chip_good(map, adr, map_word_ff(map))) {
+                       xip_enable(map, chip, adr);
+-                      break;
++                      goto op_done;
+               }
+               if (time_after(jiffies, timeo)) {
+@@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st
+               ret = -EIO;
+       }
++ op_done:
+       chip->state = FL_READY;
+       put_chip(map, chip, adr);
+       mutex_unlock(&chip->mutex);
diff --git a/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch
new file mode 100644 (file)
index 0000000..75bfbc3
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -156,6 +156,12 @@ config MTD_BCM63XX_PARTS
+         This provides partions parsing for BCM63xx devices with CFE
+         bootloaders.
++config MTD_WRT160NL_PARTS
++      tristate "Linksys WRT160NL partitioning support"
++      depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++      ---help---
++         Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+       tristate "MyLoader partition parsing"
+       depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)  += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)   += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch
new file mode 100644 (file)
index 0000000..0214915
--- /dev/null
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -158,7 +158,7 @@ config MTD_BCM63XX_PARTS
+ config MTD_WRT160NL_PARTS
+       tristate "Linksys WRT160NL partitioning support"
+-      depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++      depends on ATH79_MACH_WRT160NL
+       ---help---
+          Linksys WRT160NL partitioning support
+@@ -178,6 +178,12 @@ config MTD_MYLOADER_PARTS
+         You will still need the parsing functions to be called by the driver
+         for your particular device. It won't happen automatically.
++config MTD_TPLINK_PARTS
++      tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++      depends on ATH79
++      ---help---
++        TBD.
++
+ comment "User Modules And Translation Layers"
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)  += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)   += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TPLINK_PARTS)        += tplinkpart.o
+ obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch
new file mode 100644 (file)
index 0000000..86d9535
--- /dev/null
@@ -0,0 +1,112 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -100,6 +100,7 @@ struct m25p {
+       u16                     addr_width;
+       u8                      erase_opcode;
+       u8                      *command;
++      size_t                  max_read_len;
+ };
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -352,6 +353,7 @@ static int m25p80_read(struct mtd_info *
+       struct m25p *flash = mtd_to_m25p(mtd);
+       struct spi_transfer t[2];
+       struct spi_message m;
++      loff_t ofs;
+       pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+                       __func__, (u32)from, len);
+@@ -374,8 +376,6 @@ static int m25p80_read(struct mtd_info *
+       t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+       spi_message_add_tail(&t[0], &m);
+-      t[1].rx_buf = buf;
+-      t[1].len = len;
+       spi_message_add_tail(&t[1], &m);
+       /* Byte count starts at zero. */
+@@ -383,13 +383,6 @@ static int m25p80_read(struct mtd_info *
+       mutex_lock(&flash->lock);
+-      /* Wait till previous write/erase is done. */
+-      if (wait_till_ready(flash)) {
+-              /* REVISIT status return?? */
+-              mutex_unlock(&flash->lock);
+-              return 1;
+-      }
+-
+       /* FIXME switch to OPCODE_FAST_READ.  It's required for higher
+        * clocks; and at this writing, every chip this driver handles
+        * supports that opcode.
+@@ -397,11 +390,44 @@ static int m25p80_read(struct mtd_info *
+       /* Set up the write data buffer. */
+       flash->command[0] = OPCODE_READ;
+-      m25p_addr2cmd(flash, from, flash->command);
+-      spi_sync(flash->spi, &m);
++      ofs = 0;
++      while (len) {
++              size_t readlen;
++              size_t done;
++              int ret;
++
++              ret = wait_till_ready(flash);
++              if (ret) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
++
++              if (flash->max_read_len > 0 &&
++                  flash->max_read_len < len)
++                      readlen = flash->max_read_len;
++              else
++                      readlen = len;
++
++              t[1].rx_buf = buf + ofs;
++              t[1].len = readlen;
++
++              m25p_addr2cmd(flash, from + ofs, flash->command);
++
++              spi_sync(flash->spi, &m);
+-      *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
++              done = m.actual_length - m25p_cmdsz(flash) -
++                     FAST_READ_DUMMY_BYTE;
++              if (done != readlen) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
++
++              ofs += done;
++              len -= done;
++      }
++
++      *retlen = ofs;
+       mutex_unlock(&flash->lock);
+@@ -924,6 +950,12 @@ static int __devinit m25p_probe(struct s
+       flash->mtd.erase = m25p80_erase;
+       flash->mtd.read = m25p80_read;
++      if (data && data->max_read_len) {
++              flash->max_read_len = data->max_read_len;
++              dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
++                      flash->max_read_len);
++      }
++
+       /* sst flash chips use AAI word program */
+       if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
+               flash->mtd.write = sst_write;
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -25,6 +25,7 @@ struct flash_platform_data {
+       char            *type;
++      size_t          max_read_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
diff --git a/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
new file mode 100644 (file)
index 0000000..950bb23
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1016,7 +1016,9 @@ static int __devinit m25p_probe(struct s
+       /* partitions should match sector boundaries; and it may be good to
+        * use readonly partitions for writeprotected sectors (BP2..BP0).
+        */
+-      return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++      return mtd_device_parse_register(&flash->mtd,
++                      data ? data->part_probes : NULL,
++                      &ppdata,
+                       data ? data->parts : NULL,
+                       data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+       unsigned int    nr_parts;
+       char            *type;
++      const char      **part_probes;
+       size_t          max_read_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch
new file mode 100644 (file)
index 0000000..9d7a696
--- /dev/null
@@ -0,0 +1,45 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -79,6 +79,11 @@ static int parse_redboot_partitions(stru
+       static char nullstring[] = "unallocated";
+ #endif
++      buf = vmalloc(master->erasesize);
++      if (!buf)
++              return -ENOMEM;
++
++ restart:
+       if ( directory < 0 ) {
+               offset = master->size + directory * master->erasesize;
+               while (mtd_can_have_bb(master) &&
+@@ -86,6 +91,7 @@ static int parse_redboot_partitions(stru
+                       if (!offset) {
+                       nogood:
+                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++                              vfree(buf);
+                               return -EIO;
+                       }
+                       offset -= master->erasesize;
+@@ -99,10 +105,6 @@ static int parse_redboot_partitions(stru
+                               goto nogood;
+               }
+       }
+-      buf = vmalloc(master->erasesize);
+-
+-      if (!buf)
+-              return -ENOMEM;
+       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+              master->name, offset);
+@@ -175,6 +177,11 @@ static int parse_redboot_partitions(stru
+       }
+       if (i == numslots) {
+               /* Didn't find it */
++              if (offset + master->erasesize < master->size) {
++                      /* not at the end of the flash yet, maybe next block :) */
++                      directory++;
++                      goto restart;
++              }
+               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+                      master->name);
+               ret = 0;
diff --git a/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch
new file mode 100644 (file)
index 0000000..e1a3398
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -536,4 +536,8 @@ config MTD_NAND_FSMC
+         Enables support for NAND Flash chips on the ST Microelectronics
+         Flexible Static Memory Controller (FSMC)
++config MTD_NAND_RB4XX
++      tristate "NAND flash driver for RouterBoard 4xx series"
++      depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)               += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)         += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch
new file mode 100644 (file)
index 0000000..d67f720
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -540,4 +540,8 @@ config MTD_NAND_RB4XX
+       tristate "NAND flash driver for RouterBoard 4xx series"
+       depends on MTD_NAND && ATH79_MACH_RB4XX
++config MTD_NAND_RB750
++      tristate "NAND flash driver for the RouterBoard 750"
++      depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)                += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644 (file)
index 0000000..e4e879b
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ #define MAX_WORD_RETRIES 3
+@@ -50,7 +50,9 @@
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+       struct map_info *map = mtd->priv;
+@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
+               mtd->write = cfi_amdstd_write_buffers;
+       }
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1374,6 +1378,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+                                   unsigned long adr, const u_char *buf,
+                                   int len)
+@@ -1485,7 +1490,6 @@ static int __xipram do_write_buffer(stru
+       return ret;
+ }
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, const u_char *buf)
+ {
+@@ -1564,6 +1568,7 @@ static int cfi_amdstd_write_buffers(stru
+       return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /*
+  * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch
new file mode 100644 (file)
index 0000000..f117133
--- /dev/null
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+       bool "Atheros devices"
+       default y
+-      depends on PCI
++      depends on (PCI || ATH79)
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+@@ -67,4 +67,6 @@ config ATL1C
+         To compile this driver as a module, choose M here.  The module
+         will be called atl1c.
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch
new file mode 100644 (file)
index 0000000..78d7e0e
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -124,6 +124,11 @@ config RTL8306_PHY
+       tristate "Driver for Realtek RTL8306S switches"
+       select SWCONFIG
++config MICREL_PHY
++      tristate "Drivers for Micrel/Kendin PHYs"
++      ---help---
++        Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+       depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_RTL8366S_PHY)   += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY)   += rtl8366rb.o
+ obj-$(CONFIG_RTL8367_PHY)     += rtl8367.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o
diff --git a/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch
new file mode 100644 (file)
index 0000000..3e3902b
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+       trailer = skb_tail_pointer(skb) - 4;
+       if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-          (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++          (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+               goto out_drop;
+       source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch
new file mode 100644 (file)
index 0000000..bfb0b8e
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -12,6 +12,13 @@ config NET_DSA_MV88E6060
+         This enables support for the Marvell 88E6060 ethernet switch
+         chip.
++config NET_DSA_MV88E6063
++      bool "Marvell 88E6063 ethernet switch chip support"
++      select NET_DSA_TAG_TRAILER
++      ---help---
++        This enables support for the Marvell 88E6063 ethernet switch
++        chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+       bool
+       default n
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65
diff --git a/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch
new file mode 100644 (file)
index 0000000..e081087
--- /dev/null
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -51,8 +51,8 @@ obj-$(CONFIG_IDE)            += ide/
+ obj-$(CONFIG_SCSI)            += scsi/
+ obj-$(CONFIG_ATA)             += ata/
+ obj-$(CONFIG_TARGET_CORE)     += target/
+-obj-$(CONFIG_MTD)             += mtd/
+ obj-$(CONFIG_SPI)             += spi/
++obj-$(CONFIG_MTD)             += mtd/
+ obj-y                         += net/
+ obj-$(CONFIG_ATM)             += atm/
+ obj-$(CONFIG_FUSION)          += message/
diff --git a/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch
new file mode 100644 (file)
index 0000000..722f659
--- /dev/null
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -452,6 +452,8 @@ struct spi_transfer {
+       dma_addr_t      rx_dma;
+       unsigned        cs_change:1;
++      unsigned        verify:1;
++      unsigned        fast_write:1;
+       u8              bits_per_word;
+       u16             delay_usecs;
+       u32             speed_hz;
+@@ -493,6 +495,7 @@ struct spi_message {
+       struct spi_device       *spi;
+       unsigned                is_dma_mapped:1;
++      unsigned                fast_read:1;
+       /* REVISIT:  we might want a flag affecting the behavior of the
+        * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch
new file mode 100644 (file)
index 0000000..6cfe2e8
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -288,6 +288,12 @@ config SPI_PXA2XX
+ config SPI_PXA2XX_PCI
+       def_bool SPI_PXA2XX && X86_32 && PCI
++config SPI_RB4XX
++      tristate "Mikrotik RB4XX SPI master"
++      depends on SPI_MASTER && ATH79_MACH_RB4XX
++      help
++        SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022)                      += spi-pl022.o
+ obj-$(CONFIG_SPI_PPC4xx)              += spi-ppc4xx.o
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
+ obj-$(CONFIG_SPI_S3C24XX)             += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y                      := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch
new file mode 100644 (file)
index 0000000..579315b
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -439,6 +439,13 @@ config SPI_TLE62X0
+         sysfs interface, with each line presented as a kind of GPIO
+         exposing both switch control and diagnostic feedback.
++config SPI_RB4XX_CPLD
++      tristate "MikroTik RB4XX CPLD driver"
++      depends on ATH79_MACH_RB4XX
++      help
++        SPI driver for the Xilinx CPLD chip present on the
++        MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx)             += spi-ppc4xx.
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD)          += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_S3C24XX)             += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y                      := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch
new file mode 100644 (file)
index 0000000..b4dbcd4
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV)             += spidev.o
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA)              += spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL)                       += spi-atmel.o
++obj-$(CONFIG_SPI_AP83)                        += spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79)                       += spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550)              += spi-au1550.o
+ obj-$(CONFIG_SPI_BFIN)                        += spi-bfin5xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -59,6 +59,14 @@ config SPI_ALTERA
+       help
+         This is the driver for the Altera SPI Controller.
++config SPI_AP83
++      tristate "Atheros AP83 specific SPI Controller"
++      depends on SPI_MASTER && ATH79_MACH_AP83
++      select SPI_BITBANG
++      help
++        This is a specific SPI controller driver for the Atheros AP83
++        reference board.
++
+ config SPI_ATH79
+       tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+       depends on ATH79 && GENERIC_GPIO
diff --git a/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch
new file mode 100644 (file)
index 0000000..1462687
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -454,6 +454,11 @@ config SPI_RB4XX_CPLD
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.
++config SPI_VSC7385
++      tristate "Vitesse VSC7385 ethernet switch driver"
++      help
++        SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -61,5 +61,5 @@ obj-$(CONFIG_SPI_TI_SSP)             += spi-ti-ssp.
+ obj-$(CONFIG_SPI_TLE62X0)             += spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)                += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)                        += spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385)             += spi-vsc7385.o
+ obj-$(CONFIG_SPI_XILINX)              += spi-xilinx.o
+-
diff --git a/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch
new file mode 100644 (file)
index 0000000..88d0908
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -418,6 +418,13 @@ config LEDS_TRIGGERS
+         These triggers allow kernel events to drive the LEDs and can
+         be configured via sysfs. If unsure, say Y.
++config LEDS_WNDR3700_USB
++      tristate "NETGEAR WNDR3700 USB LED driver"
++      depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++      help
++        This option enables support for the USB LED found on the
++        NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_LEDS_DA903X)            += leds-da903
+ obj-$(CONFIG_LEDS_WM831X_STATUS)      += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}               += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)          += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)               += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)             += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch
new file mode 100644 (file)
index 0000000..e8073a2
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -425,6 +425,10 @@ config LEDS_WNDR3700_USB
+         This option enables support for the USB LED found on the
+         NETGEAR WNDR3700 board.
++config LEDS_RB750
++      tristate "LED driver for the Mikrotik RouterBOARD 750"
++      depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_LT3593)            += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520)            += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)              += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644 (file)
index 0000000..1e67abf
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -489,4 +489,13 @@ config GPIO_TPS65910
+       help
+         Select this option to enable GPIO driver for the TPS65910
+         chip family.
++
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++      tristate "NXP 74HC153 Dual 4-input multiplexer"
++      help
++        Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++        provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_MSM_V2)    += gpio-msm-v2
+ obj-$(CONFIG_GPIO_MXC)                += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS)                += gpio-mxs.o
+ obj-$(CONFIG_PLAT_NOMADIK)    += gpio-nomadik.o
++obj-$(CONFIG_GPIO_NXP_74HC153)        += gpio-nxp-74hc153.o
+ obj-$(CONFIG_ARCH_OMAP)               += gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X)    += gpio-pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X)    += gpio-pcf857x.o
diff --git a/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch
new file mode 100644 (file)
index 0000000..f269763
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -175,6 +175,7 @@ endif
+ #
+ libs-$(CONFIG_ARC)            += arch/mips/fw/arc/
+ libs-$(CONFIG_CFE)            += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)               += arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM)                += arch/mips/fw/sni/
+ libs-y                                += arch/mips/fw/lib/
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -981,6 +981,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+       bool
++config MYLOADER
++      bool
++
+ config SYNC_R4K
+       bool
diff --git a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
new file mode 100644 (file)
index 0000000..8ac50ea
--- /dev/null
@@ -0,0 +1,81 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+ static struct resource ath79_wmac_resources[] = {
+@@ -116,7 +118,7 @@ static void ar934x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = true;
+ }
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+               ar913x_wmac_setup();
+@@ -131,5 +133,10 @@ void __init ath79_register_wmac(u8 *cal_
+               memcpy(ath79_wmac_data.eeprom_data, cal_data,
+                      sizeof(ath79_wmac_data.eeprom_data));
++      if (mac_addr) {
++              memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++              ath79_wmac_data.macaddr = ath79_wmac_mac;
++      }
++
+       platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
+                                       ap81_gpio_keys);
+       ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+                          ARRAY_SIZE(ap81_spi_info));
+-      ath79_register_wmac(cal_data);
++      ath79_register_wmac(cal_data, NULL);
+       ath79_register_usb();
+ }
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -153,7 +153,7 @@ static void __init db120_setup(void)
+       ath79_register_spi(&db120_spi_data, db120_spi_info,
+                          ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+       db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
+       ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+                          ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data);
++      ath79_register_wmac(cal_data, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch
new file mode 100644 (file)
index 0000000..9b16c42
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -25,7 +25,9 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include "common.h"
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -99,6 +99,7 @@ static inline int soc_is_ar934x(void)
+ }
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
diff --git a/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch
new file mode 100644 (file)
index 0000000..2c9cad1
--- /dev/null
@@ -0,0 +1,37 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -22,6 +22,7 @@
+ #include "common.h"
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -107,3 +108,16 @@ void ath79_device_reset_clear(u32 mask)
+       spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++void ath79_flash_acquire(void)
++{
++      mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++      mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -126,4 +126,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
++
+ #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch
new file mode 100644 (file)
index 0000000..5179a53
--- /dev/null
@@ -0,0 +1,45 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -125,6 +125,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+ void ath79_flash_acquire(void);
+ void ath79_flash_release(void);
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -109,6 +109,32 @@ void ath79_device_reset_clear(u32 mask)
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++u32 ath79_device_reset_get(u32 mask)
++{
++      unsigned long flags;
++      u32 reg;
++      u32 ret;
++
++      if (soc_is_ar71xx())
++              reg = AR71XX_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar724x())
++              reg = AR724X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar913x())
++              reg = AR913X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar933x())
++              reg = AR933X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar934x())
++              reg = AR934X_RESET_REG_RESET_MODULE;
++      else
++              BUG();
++
++      spin_lock_irqsave(&ath79_device_reset_lock, flags);
++      ret = ath79_reset_rr(reg);
++      spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++      return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
+ void ath79_flash_acquire(void)
+ {
+       mutex_lock(&ath79_flash_mutex);
diff --git a/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch
new file mode 100644 (file)
index 0000000..6b09fc0
--- /dev/null
@@ -0,0 +1,47 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -184,6 +184,34 @@ void ath79_gpio_function_setup(u32 set,
+       spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+ }
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++      void __iomem *base = ath79_gpio_base;
++      unsigned long flags;
++      unsigned int reg;
++      u32 t, s;
++
++      BUG_ON(!soc_is_ar934x());
++
++      if (gpio >= AR934X_GPIO_COUNT)
++              return;
++
++      reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++      s = 8 * (gpio % 4);
++
++      spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++      t = __raw_readl(base + reg);
++      t &= ~(0xff << s);
++      t |= val << s;
++      __raw_writel(t, base + reg);
++
++      /* flush write */
++      (void) __raw_readl(base + reg);
++
++      spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void __init ath79_gpio_init(void)
+ {
+       int err;
diff --git a/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch
new file mode 100644 (file)
index 0000000..aab959b
--- /dev/null
@@ -0,0 +1,86 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,8 @@
+ #include "common.h"
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
+ static inline int is_valid_ram_addr(void *addr)
+ {
+       if (((u32) addr > KSEG0) &&
+@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
+       return 0;
+ }
++static void __init ath79_prom_append_cmdline(const char *name,
++                                            const char *value)
++{
++      snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++               " %s=%s", name, value);
++      strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++static const char * __init ath79_prom_find_env(char **envp, const char *name)
++{
++      const char *ret = NULL;
++      int len;
++      char **p;
++
++      if (!is_valid_ram_addr(envp))
++              return NULL;
++
++      len = strlen(name);
++      for (p = envp; is_valid_ram_addr(*p); p++) {
++              if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
++                      ret = *p + len + 1;
++                      break;
++              }
++
++              /* RedBoot env comes in pointer pairs - key, value */
++              if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
++                      if (is_valid_ram_addr(*(++p))) {
++                              ret = *p;
++                              break;
++                      }
++      }
++
++      return ret;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+       int i;
+@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
+ void __init prom_init(void)
+ {
++      const char *env;
++      char **envp;
++
+       ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
++
++      envp = (char **)fw_arg2;
++      if (!strstr(arcs_cmdline, "ethaddr=")) {
++              env = ath79_prom_find_env(envp, "ethaddr");
++              if (env)
++                      ath79_prom_append_cmdline("ethaddr", env);
++      }
++
++      if (!strstr(arcs_cmdline, "board=")) {
++              env = ath79_prom_find_env(envp, "board");
++              if (env) {
++                      /* Workaround for buggy bootloaders */
++                      if (strcmp(env, "RouterStation") == 0 ||
++                          strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++                              env = "UBNT-RS";
++
++                      if (strcmp(env, "RouterStation PRO") == 0)
++                              env = "UBNT-RSPRO";
++
++                      ath79_prom_append_cmdline("board", env);
++              }
++      }
+ }
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch
new file mode 100644 (file)
index 0000000..137bf6b
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -16,6 +16,7 @@
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
++#include <asm/fw/myloader/myloader.h>
+ #include "common.h"
+@@ -69,6 +70,34 @@ static const char * __init ath79_prom_fi
+       return ret;
+ }
++static int __init ath79_prom_init_myloader(void)
++{
++      struct myloader_info *mylo;
++      char mac_buf[32];
++      unsigned char *mac;
++
++      mylo = myloader_get_info();
++      if (!mylo)
++              return 0;
++
++      switch (mylo->did) {
++      case DEVID_COMPEX_WP543:
++              ath79_prom_append_cmdline("board", "WP543");
++              break;
++      default:
++              pr_warn("prom: unknown device id: %x\n", mylo->did);
++              return 0;
++      }
++
++      mac = mylo->macs[0];
++      snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++               mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++      ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++      return 1;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+       int i;
+@@ -88,6 +117,9 @@ void __init prom_init(void)
+       const char *env;
+       char **envp;
++      if (ath79_prom_init_myloader())
++              return;
++
+       ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+       envp = (char **)fw_arg2;
diff --git a/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch
new file mode 100644 (file)
index 0000000..062e513
--- /dev/null
@@ -0,0 +1,57 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
+       return ret;
+ }
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++      char *p = __image_cmdline;
++      int replace = 0;
++
++      if (*p == '-') {
++              replace = 1;
++              p++;
++      }
++
++      if (*p == '\0')
++              return 0;
++
++      if (replace) {
++              strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++      } else {
++              strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++              strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++      }
++
++      return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+       struct myloader_info *mylo;
+@@ -95,6 +124,8 @@ static int __init ath79_prom_init_myload
+       ath79_prom_append_cmdline("ethaddr", mac_buf);
++      ath79_use_image_cmdline();
++
+       return 1;
+ }
+@@ -102,6 +133,9 @@ static __init void ath79_prom_init_cmdli
+ {
+       int i;
++      if (ath79_use_image_cmdline())
++              return;
++
+       if (!is_valid_ram_addr(argv))
+               return;
diff --git a/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch
new file mode 100644 (file)
index 0000000..8b7e2d4
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -215,6 +215,8 @@ void __init plat_time_init(void)
+       mips_hpt_frequency = clk_get_rate(clk) / 2;
+ }
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+       ath79_gpio_init();
diff --git a/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
new file mode 100644 (file)
index 0000000..2d2235e
--- /dev/null
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++      .led_pin = -1,
++};
+ static struct resource ath79_wmac_resources[] = {
+       {
diff --git a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch
new file mode 100644 (file)
index 0000000..4d948bb
--- /dev/null
@@ -0,0 +1,231 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -20,7 +20,13 @@
+ #include <linux/io.h>
+ #include <linux/bitops.h>
++#define AR71XX_PCI_MEM_BASE   0x10000000
++#define AR71XX_PCI_MEM_SIZE   0x08000000
+ #define AR71XX_APB_BASE               0x18000000
++#define AR71XX_GE0_BASE               0x19000000
++#define AR71XX_GE0_SIZE               0x10000
++#define AR71XX_GE1_BASE               0x1a000000
++#define AR71XX_GE1_SIZE               0x10000
+ #define AR71XX_EHCI_BASE      0x1b000000
+ #define AR71XX_EHCI_SIZE      0x1000
+ #define AR71XX_OHCI_BASE      0x1c000000
+@@ -40,6 +46,8 @@
+ #define AR71XX_PLL_SIZE               0x100
+ #define AR71XX_RESET_BASE     (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE     0x100
++#define AR71XX_MII_BASE               (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE               0x100
+ #define AR7240_USB_CTRL_BASE  (AR71XX_APB_BASE + 0x00030000)
+ #define AR7240_USB_CTRL_SIZE  0x100
+@@ -56,11 +64,15 @@
+ #define AR933X_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE      0x14
++#define AR933X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE      0x04
+ #define AR933X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE      0x20000
+ #define AR933X_EHCI_BASE      0x1b000000
+ #define AR933X_EHCI_SIZE      0x1000
++#define AR934X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE      0x14
+ #define AR934X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE      0x20000
+ #define AR934X_EHCI_BASE      0x1b000000
+@@ -120,6 +132,9 @@
+ #define AR71XX_AHB_DIV_SHIFT          20
+ #define AR71XX_AHB_DIV_MASK           0x7
++#define AR71XX_ETH0_PLL_SHIFT         17
++#define AR71XX_ETH1_PLL_SHIFT         19
++
+ #define AR724X_PLL_REG_CPU_CONFIG     0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG    0x18
+@@ -132,6 +147,8 @@
+ #define AR724X_DDR_DIV_SHIFT          22
+ #define AR724X_DDR_DIV_MASK           0x3
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG     0x00
+ #define AR913X_PLL_REG_ETH_CONFIG     0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -144,6 +161,9 @@
+ #define AR913X_AHB_DIV_SHIFT          19
+ #define AR913X_AHB_DIV_MASK           0x1
++#define AR913X_ETH0_PLL_SHIFT         20
++#define AR913X_ETH1_PLL_SHIFT         22
++
+ #define AR933X_PLL_CPU_CONFIG_REG     0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG     0x08
+@@ -285,7 +305,11 @@
+ #define AR913X_RESET_USB_HOST         BIT(5)
+ #define AR913X_RESET_USB_PHY          BIT(4)
++#define AR933X_RESET_GE1_MDIO         BIT(23)
++#define AR933X_RESET_GE0_MDIO         BIT(22)
++#define AR933X_RESET_GE1_MAC          BIT(13)
+ #define AR933X_RESET_WMAC             BIT(11)
++#define AR933X_RESET_GE0_MAC          BIT(9)
+ #define AR933X_RESET_USB_HOST         BIT(5)
+ #define AR933X_RESET_USB_PHY          BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE  BIT(3)
+@@ -323,6 +347,8 @@
+ #define AR934X_RESET_MBOX             BIT(1)
+ #define AR934X_RESET_I2S              BIT(0)
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY      BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40   BIT(0)
+ #define AR934X_BOOTSTRAP_SW_OPTION8   BIT(23)
+@@ -427,6 +453,14 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE    0x24
+ #define AR71XX_GPIO_REG_FUNC          0x28
++#define AR934X_GPIO_REG_OUT_FUNC0     0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1     0x30
++#define AR934X_GPIO_REG_OUT_FUNC2     0x34
++#define AR934X_GPIO_REG_OUT_FUNC3     0x38
++#define AR934X_GPIO_REG_OUT_FUNC4     0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5     0x40
++#define AR934X_GPIO_REG_FUNC          0x6c
++
+ #define AR71XX_GPIO_COUNT             16
+ #define AR7240_GPIO_COUNT             18
+ #define AR7241_GPIO_COUNT             20
+@@ -434,4 +468,124 @@
+ #define AR933X_GPIO_COUNT             30
+ #define AR934X_GPIO_COUNT             23
++#define AR71XX_GPIO_FUNC_STEREO_EN            BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN           BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN           BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN              BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN            BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN           BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN               BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN          BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN          BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN          BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN          BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN          BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN          BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN               BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN         BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN            BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN              BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN              BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN               BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN              BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN           BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK            BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN             BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN                BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN           BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN              BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL  BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL  BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT   BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR934X_GPIO_FUNC_DDR_DQOE_EN  BIT(17)
++#define AR934X_GPIO_FUNC_SPI_CS_1_EN  BIT(14)
++#define AR934X_GPIO_FUNC_SPI_CS_0_EN  BIT(13)
++
++#define AR934X_GPIO_OUT_GPIO          0x00
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL      0x00
++#define AR71XX_MII_REG_MII1_CTRL      0x04
++
++#define AR71XX_MII_CTRL_IF_MASK               3
++#define AR71XX_MII_CTRL_SPEED_SHIFT   4
++#define AR71XX_MII_CTRL_SPEED_MASK    3
++#define AR71XX_MII_CTRL_SPEED_10      0
++#define AR71XX_MII_CTRL_SPEED_100     1
++#define AR71XX_MII_CTRL_SPEED_1000    2
++
++#define AR71XX_MII0_CTRL_IF_GMII      0
++#define AR71XX_MII0_CTRL_IF_MII               1
++#define AR71XX_MII0_CTRL_IF_RGMII     2
++#define AR71XX_MII0_CTRL_IF_RMII      3
++
++#define AR71XX_MII1_CTRL_IF_RGMII     0
++#define AR71XX_MII1_CTRL_IF_RMII      1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG               0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0      BIT(0)
++#define AR933X_ETH_CFG_MII_GE0                BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0               BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE  BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP       BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0               BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10        0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100       BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG               0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0    BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0      BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0     BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER       BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE        BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN       BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE   BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS  BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0     BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST       BIT(13)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch
new file mode 100644 (file)
index 0000000..a29d791
--- /dev/null
@@ -0,0 +1,60 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -88,6 +88,20 @@ config SOC_AR934X
+       select PCI_AR724X if PCI
+       def_bool n
++config ATH79_DEV_M25P80
++      select ATH79_DEV_SPI
++      def_bool n
++
++config ATH79_DEV_AP9X_PCI
++      select ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
++config ATH79_DEV_DSA
++      def_bool n
++
++config ATH79_DEV_ETH
++      def_bool n
++
+ config PCI_AR724X
+       def_bool n
+@@ -107,4 +121,10 @@ config ATH79_DEV_WMAC
+       depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+       def_bool n
++config ATH79_NVRAM
++      def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,13 +17,23 @@ obj-$(CONFIG_PCI)                  += pci.o
+ # Devices
+ #
+ obj-y                                 += dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI)      += dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA)           += dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH)           += dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)  += dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)     += dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80)                += dev-m25p80.o
+ obj-$(CONFIG_ATH79_DEV_SPI)           += dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB)           += dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC)          += dev-wmac.o
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM)             += nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)   += pci-ath9k-fixup.o
++
++#
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
diff --git a/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644 (file)
index 0000000..b8583d5
--- /dev/null
@@ -0,0 +1,240 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,23 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ #define AP121_GPIO_LED_WLAN           0
+ #define AP121_GPIO_LED_USB            1
+@@ -24,7 +28,82 @@
+ #define AP121_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL  (3 * AP121_KEYS_POLL_INTERVAL)
+-#define AP121_CAL_DATA_ADDR   0x1fff1000
++#define AP121_MAC0_OFFSET             0x0000
++#define AP121_MAC1_OFFSET             0x0006
++#define AP121_CALDATA_OFFSET          0x1000
++#define AP121_WMAC_MAC_OFFSET         0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN      0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET     11
++
++static struct mtd_partition ap121_parts[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "rootfs",
++              .offset         = 0x010000,
++              .size           = 0x130000,
++      },
++      {
++              .name           = "uImage",
++              .offset         = 0x140000,
++              .size           = 0x0a0000,
++      },
++      {
++              .name           = "NVRAM",
++              .offset         = 0x1e0000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "ART",
++              .offset         = 0x1f0000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++};
++
++static struct mtd_partition ap121_mini_parts[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x040000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "u-boot-env",
++              .offset         = 0x040000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "rootfs",
++              .offset         = 0x050000,
++              .size           = 0x2b0000,
++      },
++      {
++              .name           = "uImage",
++              .offset         = 0x300000,
++              .size           = 0x0e0000,
++      },
++      {
++              .name           = "NVRAM",
++              .offset         = 0x3e0000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "ART",
++              .offset         = 0x3f0000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++};
++
++static struct flash_platform_data ap121_flash_data;
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+       {
+@@ -58,41 +137,84 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++      {
++              .name           = "ap121:green:wlan",
++              .gpio           = AP121_MINI_GPIO_LED_WLAN,
++              .active_low     = 0,
++      },
+ };
+-static struct spi_board_info ap121_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l1606e",
+-              .controller_data = &ap121_spi0_data,
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
++      {
++              .desc           = "jumpstart button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_JUMPSTART,
++              .active_low     = 1,
++      },
++      {
++              .desc           = "reset button",
++              .type           = EV_KEY,
++              .code           = KEY_RESTART,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_RESET,
++              .active_low     = 1,
+       }
+ };
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(&ap121_flash_data);
++      ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++                          art + AP121_WMAC_MAC_OFFSET);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++      ath79_register_mdio(0, 0x0);
++
++      /* LAN ports */
++      ath79_register_eth(1);
++
++      /* WAN port */
++      ath79_register_eth(0);
++}
+ static void __init ap121_setup(void)
+ {
+-      u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++      ap121_flash_data.parts = ap121_parts;
++      ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_parts);
++
++      ap121_common_setup();
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+                                ap121_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap121_gpio_keys),
+                                       ap121_gpio_keys);
+-
+-      ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-                         ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+            ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++      ap121_flash_data.parts = ap121_mini_parts;
++      ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_mini_parts);
++
++      ap121_common_setup();
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++                               ap121_mini_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(ap121_mini_gpio_keys),
++                                      ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++           ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
++      ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
diff --git a/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch
new file mode 100644 (file)
index 0000000..cc0d598
--- /dev/null
@@ -0,0 +1,128 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+  *  by the Free Software Foundation.
+  */
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ #define AP81_GPIO_LED_STATUS  1
+ #define AP81_GPIO_LED_AOSS    3
+@@ -29,6 +33,37 @@
+ #define AP81_CAL_DATA_ADDR    0x1fff1000
++static struct mtd_partition ap81_partitions[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x040000,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "u-boot-env",
++              .offset         = 0x040000,
++              .size           = 0x010000,
++      }, {
++              .name           = "rootfs",
++              .offset         = 0x050000,
++              .size           = 0x500000,
++      }, {
++              .name           = "uImage",
++              .offset         = 0x550000,
++              .size           = 0x100000,
++      }, {
++              .name           = "ART",
++              .offset         = 0x650000,
++              .size           = 0x1b0000,
++              .mask_flags     = MTD_WRITEABLE,
++      }
++};
++
++static struct flash_platform_data ap81_flash_data = {
++      .parts          = ap81_partitions,
++      .nr_parts       = ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+       {
+               .name           = "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+       }
+ };
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "m25p64",
+-              .controller_data = &ap81_spi0_data,
+-      }
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+       u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+       ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap81_gpio_keys),
+                                       ap81_gpio_keys);
+-      ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+-                         ARRAY_SIZE(ap81_spi_info));
++      ath79_register_m25p80(&ap81_flash_data);
+       ath79_register_wmac(cal_data, NULL);
+       ath79_register_usb();
++
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++      ath79_eth0_data.speed = SPEED_100;
++      ath79_eth0_data.duplex = DUPLEX_FULL;
++      ath79_eth0_data.has_ar8216 = 1;
++
++      ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++      ath79_eth1_data.phy_mask = 0x10;
++
++      ath79_register_eth(0);
++      ath79_register_eth(1);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -18,9 +18,10 @@ config ATH79_MACH_AP121
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
+       select SOC_AR913X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
new file mode 100644 (file)
index 0000000..07b23da
--- /dev/null
@@ -0,0 +1,220 @@
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -37,17 +37,26 @@
+  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  */
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
++#define DB120_GPIO_LED_USB            11
+ #define DB120_GPIO_LED_WLAN_5G                12
+ #define DB120_GPIO_LED_WLAN_2G                13
+ #define DB120_GPIO_LED_STATUS         14
+@@ -58,8 +67,50 @@
+ #define DB120_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL  (3 * DB120_KEYS_POLL_INTERVAL)
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET             0
++#define DB120_MAC1_OFFSET             6
++#define DB120_WMAC_CALDATA_OFFSET     0x1000
++#define DB120_PCIE_CALDATA_OFFSET     0x5000
++
++static struct mtd_partition db120_partitions[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x040000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "u-boot-env",
++              .offset         = 0x040000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "rootfs",
++              .offset         = 0x050000,
++              .size           = 0x630000,
++      },
++      {
++              .name           = "uImage",
++              .offset         = 0x680000,
++              .size           = 0x160000,
++      },
++      {
++              .name           = "NVRAM",
++              .offset         = 0x7E0000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "ART",
++              .offset         = 0x7F0000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      }
++};
++
++static struct flash_platform_data db120_flash_data = {
++      .parts          = db120_partitions,
++      .nr_parts       = ARRAY_SIZE(db120_partitions),
++};
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+       {
+@@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[]
+               .gpio           = DB120_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
++      {
++              .name           = "db120:green:usb",
++              .gpio           = DB120_GPIO_LED_USB,
++              .active_low     = 1,
++      }
+ };
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi
+       },
+ };
+-static struct ath79_spi_controller_data db120_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
+-};
+-
+-static struct spi_board_info db120_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "s25sl064a",
+-              .controller_data = &db120_spi0_data,
+-      }
+-};
+-
+-static struct ath79_spi_platform_data db120_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
++static void __init db120_gmac_setup(void)
+ {
+-      switch (PCI_SLOT(dev->devfn)) {
+-      case 0:
+-              dev->dev.platform_data = &db120_ath9k_data;
+-              break;
+-      }
++      void __iomem *base;
++      u32 t;
+-      return 0;
+-}
++      base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+-      memcpy(db120_ath9k_data.eeprom_data, eeprom,
+-             sizeof(db120_ath9k_data.eeprom_data));
++      t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++      t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
++             AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
++      __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+-      ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+-      ath79_register_pci();
++      iounmap(base);
+ }
+-#else
+-static inline void db120_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+ static void __init db120_setup(void)
+ {
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++      ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++      ath79_register_m25p80(&db120_flash_data);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+                                db120_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(db120_gpio_keys),
+                                       db120_gpio_keys);
+-      ath79_register_spi(&db120_spi_data, db120_spi_info,
+-                         ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+       ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+-      db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++      ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++      db120_gmac_setup();
++
++      ath79_register_mdio(0, 0x0);
++      ath79_register_mdio(1, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++#if 0
++      /* GMAC0 is connected to an AR8327 switch */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.speed = SPEED_1000;
++      ath79_eth0_data.duplex = DUPLEX_FULL;
++#else
++      /* GMAC0 is connected to PHY4 of the internal switch */
++      ath79_switch_data.phy4_mii_en = 1;
++
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++      ath79_eth0_data.phy_mask = BIT(4);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++#endif
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected to the internal switch */
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
+ }
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -31,9 +31,11 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+       bool "Atheros DB120 reference board"
+       select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
diff --git a/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644 (file)
index 0000000..6f1829f
--- /dev/null
@@ -0,0 +1,153 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ #define PB44_GPIO_I2C_SCL     0
+ #define PB44_GPIO_I2C_SDA     1
++#define PB44_PCF8757_VSC7395_CS       0
++#define PB44_PCF8757_STEREO_CS        1
++#define PB44_PCF8757_SLIC_CS0 2
++#define PB44_PCF8757_SLIC_TEST        3
++#define PB44_PCF8757_SLIC_INT0        4
++#define PB44_PCF8757_SLIC_INT1        5
++#define PB44_PCF8757_SW_RESET 6
++#define PB44_PCF8757_SW_JUMP  8
++#define PB44_PCF8757_LED_JUMP1        9
++#define PB44_PCF8757_LED_JUMP2        10
++#define PB44_PCF8757_TP24     11
++#define PB44_PCF8757_TP25     12
++#define PB44_PCF8757_TP26     13
++#define PB44_PCF8757_TP27     14
++#define PB44_PCF8757_TP28     15
++
+ #define PB44_GPIO_EXP_BASE    16
++#define PB44_GPIO_VSC7395_CS  (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET    (PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP     (PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1   (PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+       .cs_line = 0,
+ };
++static struct ath79_spi_controller_data pb44_spi1_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_GPIO,
++      .cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++      ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++      udelay(10);
++      ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++      mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++      .reset          = pb44_vsc7395_reset,
++      .ucode_name     = "vsc7395_ucode_pb44.bin",
++      .mac_cfg = {
++              .tx_ipg         = 6,
++              .bit2           = 1,
++              .clk_sel        = 0,
++      },
++};
++
++static const char *pb44_part_probes[] = {
++      "RedBoot",
++      NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++      .part_probes    = pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .platform_data  = &pb44_flash_data,
+               .controller_data = &pb44_spi0_data,
+       },
++      {
++              .bus_num        = 0,
++              .chip_select    = 1,
++              .max_speed_hz   = 25000000,
++              .modalias       = "spi-vsc7385",
++              .platform_data  = &pb44_vsc7395_data,
++              .controller_data = &pb44_spi1_data,
++      }
+ };
+ static struct ath79_spi_platform_data pb44_spi_data = {
+       .bus_num                = 0,
+-      .num_chipselect         = 1,
++      .num_chipselect         = 2,
+ };
++#define PB44_WAN_PHYMASK      BIT(0)
++#define PB44_LAN_PHYMASK      0
++#define PB44_MDIO_PHYMASK     (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+       i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+                          ARRAY_SIZE(pb44_spi_info));
+       ath79_register_usb();
+       ath79_register_pci();
++
++      ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++      ath79_register_eth(0);
++
++      ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++      ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++      ath79_register_eth(1);
+ }
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -45,6 +45,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644 (file)
index 0000000..cc393a8
--- /dev/null
@@ -0,0 +1,109 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -57,9 +57,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM (rev 1.0) board"
+       select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -16,10 +16,11 @@
+ #include <asm/mach-ath79/irq.h>
+-#include "machtypes.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
+ #include "pci.h"
+ #define UBNT_XM_GPIO_LED_L1           0
+@@ -32,7 +33,7 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL    20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL        (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+-#define UBNT_XM_EEPROM_ADDR           (u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR           0x1fff1000
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+       {
+@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
+-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+-       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-       .cs_line = 0,
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l6405d",
+-              .controller_data = &ubnt_xm_spi0_data,
+-      }
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+-      .bus_num                = 0,
+-      .num_chipselect         = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-      switch (PCI_SLOT(dev->devfn)) {
+-      case 0:
+-              dev->dev.platform_data = &ubnt_xm_eeprom_data;
+-              break;
+-      }
+-
+-      return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+-      memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+-             sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+-      ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+-      ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+ static void __init ubnt_xm_init(void)
+ {
++      u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+                                ubnt_xm_leds_gpio);
+@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
+                                       ARRAY_SIZE(ubnt_xm_gpio_keys),
+                                       ubnt_xm_gpio_keys);
+-      ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+-                         ARRAY_SIZE(ubnt_xm_spi_info));
+-
+-      ubnt_xm_pci_init();
++      ath79_register_m25p80(NULL);
++      ap91_pci_init(eeprom, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644 (file)
index 0000000..982860f
--- /dev/null
@@ -0,0 +1,187 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -13,15 +13,17 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
+ #include <asm/mach-ath79/irq.h>
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
+ #include "machtypes.h"
+-#include "pci.h"
+ #define UBNT_XM_GPIO_LED_L1           0
+ #define UBNT_XM_GPIO_LED_L2           1
+@@ -37,19 +39,19 @@
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+       {
+-              .name           = "ubnt-xm:red:link1",
++              .name           = "ubnt:red:link1",
+               .gpio           = UBNT_XM_GPIO_LED_L1,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:orange:link2",
++              .name           = "ubnt:orange:link2",
+               .gpio           = UBNT_XM_GPIO_LED_L2,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:green:link3",
++              .name           = "ubnt:green:link3",
+               .gpio           = UBNT_XM_GPIO_LED_L3,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:green:link4",
++              .name           = "ubnt:green:link4",
+               .gpio           = UBNT_XM_GPIO_LED_L4,
+               .active_low     = 0,
+       },
+@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
++#define UBNT_M_WAN_PHYMASK    BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+       u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+                                ubnt_xm_leds_gpio);
+@@ -79,9 +85,99 @@ static void __init ubnt_xm_init(void)
+       ath79_register_m25p80(NULL);
+       ap91_pci_init(eeprom, NULL);
++
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++      ath79_register_eth(0);
+ }
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+            "UBNT-XM",
+            "Ubiquiti Networks XM (rev 1.0) board",
+            ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++           ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++      ubnt_xm_init();
++      ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++           ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++      ubnt_xm_init();
++      ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++           ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:green:globe",
++              .gpio           = 0,
++              .active_low     = 1,
++      }
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++      ath79_register_eth(1);
++      ath79_register_eth(0);
++      ath79_register_usb();
++
++      ap91_pci_init(ee, NULL);
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++                               ubnt_airrouter_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++           ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:orange:dome",
++              .gpio           = 1,
++              .active_low     = 0,
++      }, {
++              .name           = "ubnt:green:dome",
++              .gpio           = 0,
++              .active_low     = 0,
++      }
++};
++
++static void __init ubnt_unifi_setup(void)
++{
++      u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++      ath79_register_eth(0);
++
++      ap91_pci_init(ee, NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++                               ubnt_unifi_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++           ubnt_unifi_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,9 +58,11 @@ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM (rev 1.0) board"
+       select SOC_AR724X
+       select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -21,6 +21,11 @@ enum ath79_mach_type {
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
++      ATH79_MACH_UBNT_AIRROUTER,      /* Ubiquiti AirRouter */
++      ATH79_MACH_UBNT_BULLET_M,       /* Ubiquiti Bullet M */
++      ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
++      ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
++      ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+ };
diff --git a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
new file mode 100644 (file)
index 0000000..425b698
--- /dev/null
@@ -0,0 +1,679 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -16,17 +16,81 @@
+ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
++      ATH79_MACH_ALFA_AP96,           /* ALFA Network AP96 board */
++      ATH79_MACH_ALFA_NX,             /* ALFA Network N2/N5 board */
++      ATH79_MACH_ALL0258N,            /* Allnet ALL0258N */
++      ATH79_MACH_AP113,               /* Atheros AP113 reference board */
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
++      ATH79_MACH_AP83,                /* Atheros AP83 */
++      ATH79_MACH_AP96,                /* Atheros AP96 */
++      ATH79_MACH_AW_NR580,            /* AzureWave AW-NR580 */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
++      ATH79_MACH_DIR_600_A1,          /* D-Link DIR-600 rev. A1 */
++      ATH79_MACH_DIR_615_C1,          /* D-Link DIR-615 rev. C1 */
++      ATH79_MACH_DIR_615_E4,          /* D-Link DIR-615 rev. E4 */
++      ATH79_MACH_DIR_825_B1,          /* D-Link DIR-825 rev. B1 */
++      ATH79_MACH_EAP7660D,            /* Senao EAP7660D */
++      ATH79_MACH_JA76PF,              /* jjPlus JA76PF */
++      ATH79_MACH_JWAP003,             /* jjPlus JWAP003 */
++      ATH79_MACH_HORNET_UB,           /* ALFA Networks Hornet-UB */
++      ATH79_MACH_MZK_W04NU,           /* Planex MZK-W04NU */
++      ATH79_MACH_MZK_W300NH,          /* Planex MZK-W300NH */
++      ATH79_MACH_NBG460N,             /* Zyxel NBG460N/550N/550NH */
++      ATH79_MACH_OM2P,                /* OpenMesh OM2P */
++      ATH79_MACH_PB42,                /* Atheros PB42 */
++      ATH79_MACH_PB92,                /* Atheros PB92 */
++      ATH79_MACH_RB_411,              /* MikroTik RouterBOARD 411/411A/411AH */
++      ATH79_MACH_RB_411U,             /* MikroTik RouterBOARD 411U */
++      ATH79_MACH_RB_433,              /* MikroTik RouterBOARD 433/433AH */
++      ATH79_MACH_RB_433U,             /* MikroTik RouterBOARD 433UAH */
++      ATH79_MACH_RB_450G,             /* MikroTik RouterBOARD 450G */
++      ATH79_MACH_RB_450,              /* MikroTik RouterBOARD 450 */
++      ATH79_MACH_RB_493,              /* Mikrotik RouterBOARD 493/493AH */
++      ATH79_MACH_RB_493G,             /* Mikrotik RouterBOARD 493G */
++      ATH79_MACH_RB_750,              /* MikroTik RouterBOARD 750 */
++      ATH79_MACH_RW2458N,             /* Redwave RW2458N */
++      ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
++      ATH79_MACH_TL_MR11U,            /* TP-LINK TL-MR11U */
++      ATH79_MACH_TL_MR3020,           /* TP-LINK TL-MR3020 */
++      ATH79_MACH_TL_MR3220,           /* TP-LINK TL-MR3220 */
++      ATH79_MACH_TL_MR3420,           /* TP-LINK TL-MR3420 */
++      ATH79_MACH_TL_WA901ND,          /* TP-LINK TL-WA901ND */
++      ATH79_MACH_TL_WA901ND_V2,       /* TP-LINK TL-WA901ND v2 */
++      ATH79_MACH_TL_WR1043ND,         /* TP-LINK TL-WR1041ND */
++      ATH79_MACH_TL_WR2543N,          /* TP-LINK TL-WR2543N/ND */
++      ATH79_MACH_TL_WR703N,           /* TP-LINK TL-WR703N */
++      ATH79_MACH_TL_WR741ND,          /* TP-LINK TL-WR741ND */
++      ATH79_MACH_TL_WR741ND_V4,       /* TP-LINK TL-WR741ND  v4*/
++      ATH79_MACH_TL_WR841N_V1,        /* TP-LINK TL-WR841N v1 */
++      ATH79_MACH_TL_WR841N_V7,        /* TP-LINK TL-WR841N/ND v7 */
++      ATH79_MACH_TL_WR941ND,          /* TP-LINK TL-WR941ND */
+       ATH79_MACH_UBNT_AIRROUTER,      /* Ubiquiti AirRouter */
+       ATH79_MACH_UBNT_BULLET_M,       /* Ubiquiti Bullet M */
++      ATH79_MACH_UBNT_LSSR71,         /* Ubiquiti LS-SR71 */
++      ATH79_MACH_UBNT_LSX,            /* Ubiquiti LSX */
+       ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
+       ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
++      ATH79_MACH_UBNT_RSPRO,          /* Ubiquiti RouterStation Pro */
++      ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */
+       ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
++      ATH79_MACH_WHR_G301N,           /* Buffalo WHR-G301N */
++      ATH79_MACH_WHR_HP_G300N,        /* Buffalo WHR-HP-G300N */
++      ATH79_MACH_WHR_HP_GN,           /* Buffalo WHR-HP-GN */
++      ATH79_MACH_WNDR3700,            /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++      ATH79_MACH_WNR2000,             /* NETGEAR WNR2000 */
++      ATH79_MACH_WP543,               /* Compex WP543 */
++      ATH79_MACH_WPE72,               /* Compex WPE72 */
++      ATH79_MACH_WRT160NL,            /* Linksys WRT160NL */
++      ATH79_MACH_WRT400N,             /* Linksys WRT400N */
++      ATH79_MACH_WZR_HP_AG300H,       /* Buffalo WZR-HP-AG300H */
++      ATH79_MACH_WZR_HP_G300NH,       /* Buffalo WZR-HP-G300NH */
++      ATH79_MACH_WZR_HP_G300NH2,      /* Buffalo WZR-HP-G300NH2 */
++      ATH79_MACH_WZR_HP_G450H,        /* Buffalo WZR-HP-G450H */
++      ATH79_MACH_ZCN_1523H_2,         /* Zcomax ZCN-1523H-2-xx */
+ };
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -2,6 +2,52 @@ if ATH79
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
++config ATH79_MACH_ALFA_AP96
++      bool "ALFA Network AP96 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++      bool "ALFA Network Hornet-UB board support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++      bool "ALFA Network N2/N5 board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0258N
++      bool "Allnet ALL0258N support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++      bool "Atheros AP113 board support"
++      select SOC_AR724X
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_PB9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
+@@ -28,6 +74,36 @@ config ATH79_MACH_AP81
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP81 reference board.
++config ATH79_MACH_AP83
++      bool "Atheros AP83 board support"
++      select SOC_AR913X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++      bool "Atheros AP96 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_AP121
++      bool "Atheros AP121 reference board"
++      select SOC_AR933X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      help
++        Say 'Y' here if you want your kernel to support the
++        Atheros AP121 reference board.
++
+ config ATH79_MACH_DB120
+       bool "Atheros DB120 reference board"
+       select SOC_AR934X
+@@ -42,6 +118,13 @@ config ATH79_MACH_DB120
+         Say 'Y' here if you want your kernel to support the
+         Atheros DB120 reference board.
++config ATH79_MACH_PB42
++      bool "Atheros PB42 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_M25P80
++
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
+         Say 'Y' here if you want your kernel to support the
+         Atheros PB44 reference board.
++config ATH79_MACH_PB92
++      bool "Atheros PB92 board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_PB9X_PCI if PCI
++      select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++      bool "AzureWave AW-NR580 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_WHR_HP_G300N
++      bool "Buffalo WHR-HP-G300N board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_WZR_HP_AG300H
++      bool "Buffalo WZR-HP-AG300H board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++      bool "Buffalo WZR-HP-G300NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++      bool "Buffalo WZR-HP-G300NH2 board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++      bool "Buffalo WZR-HP-G450H board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WP543
++      bool "Compex WP543/WPJ543 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select MYLOADER
++
++config ATH79_MACH_WPE72
++      bool "Compex WPE72/WPE72NX board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select MYLOADER
++
++config ATH79_MACH_DIR_600_A1
++      bool "D-Link DIR-600 A1/DIR-615 E4 support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++      bool "D-Link DIR-615 rev. C1 support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++      bool "D-Link DIR-825 rev. B1 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_JA76PF
++      bool "jjPlus JA76PF board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++      bool "jjPlus JWAP003 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++      bool "Linksys WRT160NL board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++      bool "Linksys WRT400N board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++
++config ATH79_MACH_RB4XX
++      bool "MikroTik RouterBOARD 4xx series support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++      bool "MikroTik RouterBOARD 750 support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++
++config ATH79_MACH_WNDR3700
++      bool "NETGEAR WNDR3700 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WNR2000
++      bool "NETGEAR WNR2000 board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM2P
++      bool "OpenMesh OM2P board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_MZK_W04NU
++      bool "Planex MZK-W04NU board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++      bool "Planex MZK-W300NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++      bool "Redwave RW2458N board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_EAP7660D
++      bool "Senao EAP7660D support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_MR11U
++      bool "TP-LINK TL-MR11U support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3020
++      bool "TP-LINK TL-MR3020 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++      bool "TP-LINK TL-MR3220/3420 support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WA901ND
++      bool "TP-LINK TL-WA901ND support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++      bool "TP-LINK TL-WA901ND v2 support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR703N
++      bool "TP-LINK TL-WR703N support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++      bool "TP-LINK TL-WR741ND support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++      bool "TP-LINK TL-WR741ND v4 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++      bool "TP-LINK TL-WR841N v1 support"
++      select SOC_AR71XX
++      select ATH79_DEV_DSA
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR941ND
++      bool "TP-LINK TL-WR941ND support"
++      select SOC_AR913X
++      select ATH79_DEV_DSA
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++      bool "TP-LINK TL-WR1043ND support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++      bool "TP-LINK TL-WR2543N/ND support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++      bool "TRENDnet TEW-632BRP support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_UBNT
++      bool "Ubiquiti AR71xx based boards support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
+ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM (rev 1.0) board"
+       select SOC_AR724X
+@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
++config ATH79_MACH_ZCN_1523H
++      bool "Zcomax ZCN-1523H support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++      bool "Zyxel NBG460N/550N/550NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
+ endmenu
+ config SOC_AR71XX
+@@ -96,10 +560,6 @@ config SOC_AR934X
+       select PCI_AR724X if PCI
+       def_bool n
+-config ATH79_DEV_M25P80
+-      select ATH79_DEV_SPI
+-      def_bool n
+-
+ config ATH79_DEV_AP9X_PCI
+       select ATH79_PCI_ATH9K_FIXUP
+       def_bool n
+@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
+ config ATH79_DEV_ETH
+       def_bool n
+-config PCI_AR724X
++config ATH79_DEV_M25P80
++      select ATH79_DEV_SPI
++      def_bool n
++
++config ATH79_DEV_DSA
++      def_bool n
++
++config ATH79_DEV_ETH
+       def_bool n
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -135,4 +602,7 @@ config ATH79_NVRAM
+ config ATH79_PCI_ATH9K_FIXUP
+       def_bool n
++config PCI_AR724X
++      def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+ #
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96)    += mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX)      += mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N)     += mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_AP113)                += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83)         += mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96)         += mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
+ obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1)   += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1)   += mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D)     += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_JA76PF)               += mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003)      += mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB)    += mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU)    += mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH)   += mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N)      += mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P)         += mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_PB42)         += mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44)         += mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92)         += mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_RB4XX)                += mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750)                += mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)     += mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020)    += mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20)    += mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND)   += mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)        += mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND)   += mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)        += mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND)   += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)  += mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N)   += mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N)    += mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_UBNT)         += mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)      += mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700)     += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNR2000)      += mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WP543)                += mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72)                += mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL)     += mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N)      += mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)        += mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)       += mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)        += mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
diff --git a/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch
new file mode 100644 (file)
index 0000000..0758c99
--- /dev/null
@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -491,6 +491,17 @@ config ATH79_MACH_TEW_632BRP
+       select ATH79_DEV_WMAC
+       select ATH79_NVRAM
++config ATH79_MACH_TEW_673GRU
++      bool "TRENDnet TEW-673GRU support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_NVRAM
++
+ config ATH79_MACH_UBNT
+       bool "Ubiquiti AR71xx based boards support"
+       select SOC_AR71XX
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -53,6 +53,7 @@ enum ath79_mach_type {
+       ATH79_MACH_RB_750,              /* MikroTik RouterBOARD 750 */
+       ATH79_MACH_RW2458N,             /* Redwave RW2458N */
+       ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
++      ATH79_MACH_TEW_673GRU,          /* TRENDnet TEW-673GRU */
+       ATH79_MACH_TL_MR11U,            /* TP-LINK TL-MR11U */
+       ATH79_MACH_TL_MR3020,           /* TP-LINK TL-MR3020 */
+       ATH79_MACH_TL_MR3220,           /* TP-LINK TL-MR3220 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_RB4XX)               += mach-
+ obj-$(CONFIG_ATH79_MACH_RB750)                += mach-rb750.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU)   += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR11U)     += mach-tl-mr11u.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3020)    += mach-tl-mr3020.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3X20)    += mach-tl-mr3x20.o
diff --git a/target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch b/target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch
new file mode 100644 (file)
index 0000000..2981350
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -188,16 +188,16 @@ static void __init ar934x_usb_setup(void
+       if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+               return;
+-      ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
++      ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+       udelay(1000);
+-      ath79_device_reset_set(AR934X_RESET_USB_PHY);
++      ath79_device_reset_clear(AR934X_RESET_USB_PHY);
+       udelay(1000);
+-      ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
++      ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
+       udelay(1000);
+-      ath79_device_reset_set(AR934X_RESET_USB_HOST);
++      ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+       udelay(1000);
+       ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
diff --git a/target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch b/target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch
new file mode 100644 (file)
index 0000000..64ffebf
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/ath79/dev-eth.c
++++ b/arch/mips/ath79/dev-eth.c
+@@ -331,6 +331,10 @@ static void ar934x_set_speed_ge1(int spe
+       /* TODO */
+ }
++static void ath79_ddr_no_flush(void)
++{
++}
++
+ static void ath79_ddr_flush_ge0(void)
+ {
+       ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
+@@ -371,16 +375,6 @@ static void ar933x_ddr_flush_ge1(void)
+       ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
+ }
+-static void ar934x_ddr_flush_ge0(void)
+-{
+-      ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0);
+-}
+-
+-static void ar934x_ddr_flush_ge1(void)
+-{
+-      ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1);
+-}
+-
+ static struct resource ath79_eth0_resources[] = {
+       {
+               .name   = "mac_base",
+@@ -817,17 +811,16 @@ void __init ath79_register_eth(unsigned 
+               if (id == 0) {
+                       pdata->reset_bit = AR934X_RESET_GE0_MAC |
+                                          AR934X_RESET_GE0_MDIO;
+-                      pdata->ddr_flush =ar934x_ddr_flush_ge0;
+                       pdata->set_speed = ar934x_set_speed_ge0;
+               } else {
+                       pdata->reset_bit = AR934X_RESET_GE1_MAC |
+                                          AR934X_RESET_GE1_MDIO;
+-                      pdata->ddr_flush = ar934x_ddr_flush_ge1;
+                       pdata->set_speed = ar934x_set_speed_ge1;
+                       pdata->switch_data = &ath79_switch_data;
+               }
++              pdata->ddr_flush = ath79_ddr_no_flush;
+               pdata->has_gbit = 1;
+               pdata->is_ar724x = 1;
diff --git a/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch
new file mode 100644 (file)
index 0000000..39584aa
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+       ctrl->ops->set_mdio_dir(ctrl, 0);
+-      /* check the turnaround bit: the PHY should be driving it to zero */
+-      if (mdiobb_get_bit(ctrl) != 0) {
+-              /* PHY didn't drive TA low -- flush any bits it
+-               * may be trying to send.
+-               */
+-              for (i = 0; i < 32; i++)
+-                      mdiobb_get_bit(ctrl);
+-
+-              return 0xffff;
+-      }
++      mdiobb_get_bit(ctrl);
+       ret = mdiobb_get_num(ctrl, 16);
+       mdiobb_get_bit(ctrl);
diff --git a/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch
new file mode 100644 (file)
index 0000000..921cf19
--- /dev/null
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -12,6 +12,7 @@
+ #define _ASM_CHECKSUM_H
+ #include <linux/in6.h>
++#include <linux/unaligned/packed_struct.h>
+ #include <asm/uaccess.h>
+@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const
+       const unsigned int *stop = word + ihl;
+       unsigned int csum;
+       int carry;
++      unsigned int w;
+-      csum = word[0];
+-      csum += word[1];
+-      carry = (csum < word[1]);
++      csum = __get_unaligned_cpu32(word++);
++
++      w = __get_unaligned_cpu32(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+-      csum += word[2];
+-      carry = (csum < word[2]);
++      w = __get_unaligned_cpu32(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+-      csum += word[3];
+-      carry = (csum < word[3]);
++      w = __get_unaligned_cpu32(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+-      word += 4;
+       do {
+-              csum += *word;
+-              carry = (csum < *word);
++              w = __get_unaligned_cpu32(word++);
++              csum += w;
++              carry = (csum < w);
+               csum += carry;
+-              word++;
+       } while (word != stop);
+       return csum_fold(csum);
+--- a/include/linux/ip.h
++++ b/include/linux/ip.h
+@@ -102,7 +102,7 @@ struct iphdr {
+       __be32  saddr;
+       __be32  daddr;
+       /*The options start here. */
+-};
++} __packed;
+ #ifdef __KERNEL__
+ #include <linux/skbuff.h>
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -126,7 +126,7 @@ struct ipv6hdr {
+       struct  in6_addr        saddr;
+       struct  in6_addr        daddr;
+-};
++} __packed;
+ #ifdef __KERNEL__
+ /*
+--- a/include/linux/tcp.h
++++ b/include/linux/tcp.h
+@@ -54,7 +54,7 @@ struct tcphdr {
+       __be16  window;
+       __sum16 check;
+       __be16  urg_ptr;
+-};
++} __packed;
+ /*
+  *    The union cast uses a gcc extension to avoid aliasing problems
+--- a/include/linux/udp.h
++++ b/include/linux/udp.h
+@@ -24,7 +24,7 @@ struct udphdr {
+       __be16  dest;
+       __be16  len;
+       __sum16 check;
+-};
++} __packed;
+ /* UDP socket options */
+ #define UDP_CORK      1       /* Never send partially complete segments */
+--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+@@ -14,6 +14,7 @@
+ #include <linux/skbuff.h>
+ #include <linux/icmp.h>
+ #include <linux/sysctl.h>
++#include <linux/unaligned/packed_struct.h>
+ #include <net/route.h>
+ #include <net/ip.h>
+@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru
+       if (ap == NULL)
+               return false;
+-      tuple->src.u3.ip = ap[0];
+-      tuple->dst.u3.ip = ap[1];
++      tuple->src.u3.ip = __get_unaligned_cpu32(ap++);
++      tuple->dst.u3.ip = __get_unaligned_cpu32(ap);
+       return true;
+ }