ramips: add support for TP-Link RE220 v2

TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.

This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at>
for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
and GPIO pinout.

Specifications

MediaTek MT7628AN (580 Mhz)
64 MB of RAM
8 MB of FLASH
2T2R 2.4 GHz and 1T1R 5 GHz
1x 10/100 Mbps Ethernet
UART header on PCB (57600 8n1)
8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled separately.

Web Interface Installation

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Signed-off-by: Rowan Border <rowanjborder@gmail.com>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index f2e4a7ce9a71791b124407daec42618fb043bc37..a97f329a8782e88383dc607635ab1e3b7a6acc31 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -1555,6 +1555,49 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system"
        },
 
+       /** Firmware layout for the RE220 v2 */
+       {
+               .id     = "RE220-V2",
+               .vendor = "",
+               .support_list =
+                       "SupportList:\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
+                       "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
+               .support_trail = '\x00',
+               .soft_ver = NULL,
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"firmware", 0x20000, 0x7a0000},
+                       {"partition-table", 0x7c0000, 0x02000},
+                       {"default-mac", 0x7c2000, 0x00020},
+                       {"pin", 0x7c2100, 0x00020},
+                       {"product-info", 0x7c3100, 0x01000},
+                       {"soft-version", 0x7c4200, 0x01000},
+                       {"support-list", 0x7c5200, 0x01000},
+                       {"profile", 0x7c6200, 0x08000},
+                       {"config-info", 0x7ce200, 0x00400},
+                       {"user-config", 0x7d0000, 0x10000},
+                       {"default-config", 0x7e0000, 0x10000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system"
+       },
+
   /** Firmware layout for the RE305 v1 */
        {
                .id     = "RE305-V1",