modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2008 Steven Barth <steven@midlink.org>
   5
   6 Licensed under the Apache License, Version 2.0 (the "License");
   7 you may not use this file except in compliance with the License.
   8 You may obtain a copy of the License at
   9
  10         http://www.apache.org/licenses/LICENSE-2.0
  11
  12 $Id$
  13 ]]--
  14
  15 local wa = require "luci.tools.webadmin"
  16 local nw = require "luci.model.network"
  17 local ww = require "luci.model.wireless"
  18 local fs = require "nixio.fs"
  19
  20 arg[1] = arg[1] or ""
  21 arg[2] = arg[2] or ""
  22
  23 m = Map("wireless", translate("Networks"), translate("You can run several wifi networks with one device. Be aware that there are certain hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network simultaneously."))
  24 m:chain("network")
  25
  26 local ifsection
  27
  28 function m.on_commit(map)
  29         nw.init(map.uci)
  30         ww.init(map.uci)
  31
  32         local wnet = ww:get_network(arg[2])
  33         if ifsection and wnet then
  34                 ifsection.section = wnet.sid
  35         end
  36 end
  37
  38 nw.init(m.uci)
  39 ww.init(m.uci)
  40
  41
  42 local iw = nil
  43 local tx_powers = nil
  44
  45 m.uci:foreach("wireless", "wifi-iface",
  46         function(s)
  47                 if s.device == arg[1] and not iw then
  48                         iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
  49                         tx_powers = iw.txpwrlist or { }
  50                 end
  51         end)
  52
  53 s = m:section(NamedSection, arg[1], "wifi-device", translate("Device") .. " " .. arg[1])
  54 s.addremove = false
  55
  56 s:tab("general", translate("General Setup"))
  57 s:tab("macfilter", translate("MAC-Filter"))
  58 s:tab("advanced", translate("Advanced Settings"))
  59
  60 --[[
  61 back = s:option(DummyValue, "_overview", translate("Overview"))
  62 back.value = ""
  63 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
  64 ]]
  65
  66 en = s:taboption("general", Flag, "disabled", translate("enable"))
  67 en.enabled = "0"
  68 en.disabled = "1"
  69 en.rmempty = false
  70
  71 function en.cfgvalue(self, section)
  72         return Flag.cfgvalue(self, section) or "0"
  73 end
  74
  75 s:taboption("general", DummyValue, "type", translate("Type"))
  76
  77 local hwtype = m:get(arg[1], "type")
  78 -- NanoFoo
  79 local nsantenna = m:get(arg[1], "antenna")
  80
  81 ch = s:taboption("general", Value, "channel", translate("Channel"))
  82 ch:value("auto", translate("auto"))
  83 for c, f in luci.util.kspairs(luci.sys.wifi.channels()) do
  84         ch:value(c, "%i (%.3f GHz)" %{ c, f })
  85 end
  86
  87
  88 ------------------- MAC80211 Device ------------------
  89
  90 if hwtype == "mac80211" then
  91         tp = s:taboption("general",
  92                 (tx_powers and #tx_powers > 0) and ListValue or Value,
  93                 "txpower", translate("Transmit Power"), "dBm")
  94
  95         tp.rmempty = true
  96         for _, p in ipairs(iw and iw.txpwrlist or {}) do
  97                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
  98         end
  99 end
 100
 101
 102 ------------------- Madwifi Device ------------------
 103
 104 if hwtype == "atheros" then
 105         tp = s:taboption("general",
 106                 (#tx_powers > 0) and ListValue or Value,
 107                 "txpower", translate("Transmit Power"), "dBm")
 108
 109         tp.rmempty = true
 110         for _, p in ipairs(iw.txpwrlist) do
 111                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 112         end
 113
 114         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 115         mode:value("", translate("auto"))
 116         mode:value("11b", "802.11b")
 117         mode:value("11g", "802.11g")
 118         mode:value("11a", "802.11a")
 119         mode:value("11bg", "802.11b+g")
 120         mode:value("11gst", "802.11g + Turbo")
 121         mode:value("11ast", "802.11a + Turbo")
 122         mode:value("fh", translate("Frequency Hopping"))
 123
 124         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 125
 126         if not nsantenna then
 127                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 128                 ant1.widget = "radio"
 129                 ant1.orientation = "horizontal"
 130                 ant1:depends("diversity", "")
 131                 ant1:value("0", translate("auto"))
 132                 ant1:value("1", translate("Antenna 1"))
 133                 ant1:value("2", translate("Antenna 2"))
 134
 135                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 136                 ant2.widget = "radio"
 137                 ant2.orientation = "horizontal"
 138                 ant2:depends("diversity", "")
 139                 ant2:value("0", translate("auto"))
 140                 ant2:value("1", translate("Antenna 1"))
 141                 ant2:value("2", translate("Antenna 2"))
 142
 143         else -- NanoFoo
 144                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 145                 ant:value("auto")
 146                 ant:value("vertical")
 147                 ant:value("horizontal")
 148                 ant:value("external")
 149         end
 150
 151         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 152                 translate("Distance to farthest network member in meters."))
 153         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 154         s:taboption("advanced", Value, "country", translate("Country Code"))
 155         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 156
 157         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 158 end
 159
 160
 161
 162 ------------------- Broadcom Device ------------------
 163
 164 if hwtype == "broadcom" then
 165         tp = s:taboption("general",
 166                 (#tx_powers > 0) and ListValue or Value,
 167                 "txpower", translate("Transmit Power"), "dBm")
 168
 169         tp.rmempty = true
 170         for _, p in ipairs(iw.txpwrlist) do
 171                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 172         end
 173
 174         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 175         mp:value("", translate("disable"))
 176         mp:value("allow", translate("Allow listed only"))
 177         mp:value("deny", translate("Allow all except listed"))
 178         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 179         ml:depends({macfilter="allow"})
 180         ml:depends({macfilter="deny"})
 181
 182         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 183         ant1.widget = "radio"
 184         ant1:depends("diversity", "")
 185         ant1:value("3", translate("auto"))
 186         ant1:value("0", translate("Antenna 1"))
 187         ant1:value("1", translate("Antenna 2"))
 188
 189         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 190         ant2.widget = "radio"
 191         ant2:depends("diversity", "")
 192         ant2:value("3", translate("auto"))
 193         ant2:value("0", translate("Antenna 1"))
 194         ant2:value("1", translate("Antenna 2"))
 195
 196         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 197
 198         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 199         --s:option(Value, "slottime", translate("Slot time"))
 200
 201         s:taboption("advanced", Value, "country", translate("Country Code"))
 202         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 203 end
 204
 205
 206 --------------------- HostAP Device ---------------------
 207
 208 if hwtype == "prism2" then
 209         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 210
 211         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 212
 213         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 214         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 215 end
 216
 217
 218 ----------------------- Interface -----------------------
 219
 220 local wnet = ww:get_network(arg[2])
 221
 222 if wnet then
 223         s = m:section(NamedSection, wnet.sid, "wifi-iface", ww:get_i18n(wnet))
 224         ifsection = s
 225         s.addremove = false
 226         s.anonymous = true
 227         s.defaults.device = arg[1]
 228
 229         s:tab("general", translate("General Setup"))
 230         s:tab("encryption", translate("Wireless Security"))
 231         s:tab("macfilter", translate("MAC-Filter"))
 232         s:tab("advanced", translate("Advanced Settings"))
 233
 234         s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 235
 236         mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 237         mode.override_values = true
 238         mode:value("ap", translate("Access Point"))
 239         mode:value("sta", translate("Client"))
 240         mode:value("adhoc", translate("Ad-Hoc"))
 241
 242         bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 243
 244         network = s:taboption("general", Value, "network", translate("Network"), translate("Add the Wifi network to physical network"))
 245         network.rmempty = true
 246         network.template = "cbi/network_netlist"
 247         network.widget = "radio"
 248
 249         function network.write(self, section, value)
 250                 local i = nw:get_interface(section)
 251                 if i then
 252                         if value == '-' then
 253                                 value = m:formvalue(self:cbid(section) .. ".newnet")
 254                                 if value and #value > 0 then
 255                                         local n = nw:add_network(value, {type="bridge", proto="none"})
 256                                         if n then n:add_interface(i) end
 257                                 else
 258                                         local n = i:get_network()
 259                                         if n then n:del_interface(i) end
 260                                 end
 261                         else
 262                                 local n = nw:get_network(value)
 263                                 if n then
 264                                         n:type("bridge")
 265                                         n:add_interface(i)
 266                                 end
 267                         end
 268                 end
 269         end
 270
 271         -------------------- MAC80211 Interface ----------------------
 272
 273         if hwtype == "mac80211" then
 274                 if fs.access("/usr/sbin/iw") then
 275                         mode:value("mesh", "802.11s")
 276                 end
 277
 278                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 279                 mode:value("monitor", translate("Monitor"))
 280                 bssid:depends({mode="adhoc"})
 281
 282                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 283                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 284         end
 285
 286
 287
 288         -------------------- Madwifi Interface ----------------------
 289
 290         if hwtype == "atheros" then
 291                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 292                 mode:value("monitor", translate("Monitor"))
 293                 mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 294                 mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 295
 296                 function mode.write(self, section, value)
 297                         if value == "ap-wds" then
 298                                 ListValue.write(self, section, "ap")
 299                                 m.uci:set("wireless", section, "wds", 1)
 300                         elseif value == "sta-wds" then
 301                                 ListValue.write(self, section, "sta")
 302                                 m.uci:set("wireless", section, "wds", 1)
 303                         else
 304                                 ListValue.write(self, section, value)
 305                                 m.uci:delete("wireless", section, "wds")
 306                         end
 307                 end
 308
 309                 function mode.cfgvalue(self, section)
 310                         local mode = ListValue.cfgvalue(self, section)
 311                         local wds  = m.uci:get("wireless", section, "wds") == "1"
 312
 313                         if mode == "ap" and wds then
 314                                 return "ap-wds"
 315                         elseif mode == "sta" and wds then
 316                                 return "sta-wds"
 317                         else
 318                                 return mode
 319                         end
 320                 end
 321
 322                 bssid:depends({mode="adhoc"})
 323                 bssid:depends({mode="ahdemo"})
 324
 325                 wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 326                 wdssep:depends({mode="ap-wds"})
 327
 328                 s:taboption("advanced", Flag, "doth", "802.11h")
 329                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 330                 hidden:depends({mode="ap"})
 331                 hidden:depends({mode="adhoc"})
 332                 hidden:depends({mode="ap-wds"})
 333                 hidden:depends({mode="sta-wds"})
 334                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 335                  translate("Prevents client-to-client communication"))
 336                 isolate:depends({mode="ap"})
 337                 s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 338
 339                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 340                 mp:value("", translate("disable"))
 341                 mp:value("deny", translate("Allow listed only"))
 342                 mp:value("allow", translate("Allow all except listed"))
 343                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 344                 ml:depends({macpolicy="allow"})
 345                 ml:depends({macpolicy="deny"})
 346
 347                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 348                 s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 349                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 350                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 351                 s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 352                 s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 353                 s:taboption("advanced", Flag, "compression", translate("Compression"))
 354
 355                 s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 356                 s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 357                 s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 358
 359                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 360                 s:taboption("advanced", Flag, "xr", translate("XR Support"))
 361                 s:taboption("advanced", Flag, "ar", translate("AR Support"))
 362
 363                 local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 364                 swm:depends({mode="adhoc"})
 365
 366                 local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 367                 nos:depends({mode="sta"})
 368                 nos:depends({mode="sta-wds"})
 369
 370                 local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 371                 probereq.enabled  = "0"
 372                 probereq.disabled = "1"
 373         end
 374
 375
 376         -------------------- Broadcom Interface ----------------------
 377
 378         if hwtype == "broadcom" then
 379                 mode:value("wds", translate("WDS"))
 380                 mode:value("monitor", translate("Monitor"))
 381
 382                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 383                 hidden:depends({mode="ap"})
 384                 hidden:depends({mode="adhoc"})
 385                 hidden:depends({mode="wds"})
 386
 387                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 388                  translate("Prevents client-to-client communication"))
 389                 isolate:depends({mode="ap"})
 390
 391                 s:taboption("advanced", Flag, "doth", "802.11h")
 392                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 393
 394                 bssid:depends({mode="wds"})
 395                 bssid:depends({mode="adhoc"})
 396         end
 397
 398
 399         ----------------------- HostAP Interface ---------------------
 400
 401         if hwtype == "prism2" then
 402                 mode:value("wds", translate("WDS"))
 403                 mode:value("monitor", translate("Monitor"))
 404
 405                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 406                 hidden:depends({mode="ap"})
 407                 hidden:depends({mode="adhoc"})
 408                 hidden:depends({mode="wds"})
 409
 410                 bssid:depends({mode="sta"})
 411
 412                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 413                 mp:value("", translate("disable"))
 414                 mp:value("deny", translate("Allow listed only"))
 415                 mp:value("allow", translate("Allow all except listed"))
 416                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 417                 ml:depends({macpolicy="allow"})
 418                 ml:depends({macpolicy="deny"})
 419
 420                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 421                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 422                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 423         end
 424
 425
 426         ------------------- WiFI-Encryption -------------------
 427
 428         encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 429         encr.override_values = true
 430         encr:depends({mode="ap"})
 431         encr:depends({mode="sta"})
 432         encr:depends({mode="adhoc"})
 433         encr:depends({mode="ahdemo"})
 434         encr:depends({mode="ap-wds"})
 435         encr:depends({mode="sta-wds"})
 436         encr:depends({mode="mesh"})
 437
 438         encr:value("none", "No Encryption")
 439         encr:value("wep", "WEP")
 440
 441         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 442                 local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 443                 local hostapd = fs.access("/usr/sbin/hostapd")
 444
 445                 if hostapd and supplicant then
 446                         encr:value("psk", "WPA-PSK")
 447                         encr:value("psk2", "WPA2-PSK")
 448                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
 449                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 450                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
 451                 elseif hostapd and not supplicant then
 452                         encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 453                         encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 454                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 455                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 456                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 457                         encr.description = translate(
 458                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 459                                 "and ad-hoc mode) to be installed."
 460                         )
 461                 elseif not hostapd and supplicant then
 462                         encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 463                         encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 464                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 465                         encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 466                         encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 467                         encr.description = translate(
 468                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 469                                 "and ad-hoc mode) to be installed."
 470                         )
 471                 else
 472                         encr.description = translate(
 473                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 474                                 "and ad-hoc mode) to be installed."
 475                         )
 476                 end
 477         elseif hwtype == "broadcom" then
 478                 encr:value("psk", "WPA-PSK")
 479                 encr:value("psk2", "WPA2-PSK")
 480                 encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 481         end
 482
 483         encr:depends("mode", "ap")
 484         encr:depends("mode", "sta")
 485         encr:depends("mode", "ap-wds")
 486         encr:depends("mode", "sta-wds")
 487         encr:depends("mode", "wds")
 488
 489         server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
 490         server:depends({mode="ap", encryption="wpa"})
 491         server:depends({mode="ap", encryption="wpa2"})
 492         server.rmempty = true
 493
 494         port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
 495         port:depends({mode="ap", encryption="wpa"})
 496         port:depends({mode="ap", encryption="wpa2"})
 497         port.rmempty = true
 498
 499         key = s:taboption("encryption", Value, "key", translate("Key"))
 500         key:depends("encryption", "wep")
 501         key:depends("encryption", "psk")
 502         key:depends("encryption", "psk2")
 503         key:depends("encryption", "psk+psk2")
 504         key:depends("encryption", "psk-mixed")
 505         key:depends({mode="ap", encryption="wpa"})
 506         key:depends({mode="ap", encryption="wpa2"})
 507         key.rmempty = true
 508         key.password = true
 509
 510         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 511                 nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
 512                 nasid:depends({mode="ap", encryption="wpa"})
 513                 nasid:depends({mode="ap", encryption="wpa2"})
 514                 nasid.rmempty = true
 515
 516                 eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 517                 eaptype:value("TLS")
 518                 eaptype:value("TTLS")
 519                 eaptype:value("PEAP")
 520                 eaptype:depends({mode="sta", encryption="wpa"})
 521                 eaptype:depends({mode="sta", encryption="wpa2"})
 522
 523                 cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 524                 cacert:depends({mode="sta", encryption="wpa"})
 525                 cacert:depends({mode="sta", encryption="wpa2"})
 526
 527                 privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
 528                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 529                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 530
 531                 privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
 532                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 533                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 534
 535
 536                 auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
 537                 auth:value("PAP")
 538                 auth:value("CHAP")
 539                 auth:value("MSCHAP")
 540                 auth:value("MSCHAPV2")
 541                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 542                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 543                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 544                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 545
 546
 547                 identity = s:taboption("encryption", Value, "identity", translate("Identity"))
 548                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 549                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 550                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 551                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 552
 553                 password = s:taboption("encryption", Value, "password", translate("Password"))
 554                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 555                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 556                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 557                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 558         end
 559 end
 560
 561 return m