"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2011-04-18 23:18+0800\n"
+"PO-Revision-Date: 2011-09-28 11:52+0200\n"
"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
"Language-Team: QQ Group:75543259\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
+"Language: zh_CN\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Pootle 2.0.4\n"
msgid "(%d minute window, %d second interval)"
-msgstr "(%d分钟绘图, 每%d秒刷新)"
+msgstr "(%d分钟绘图，%d秒刷新)"
msgid "(%s available)"
msgstr "(%s 可用)"
msgid "1 Minute Load:"
msgstr "1分钟负载:"
-msgid "5 Minute Load:"
-msgstr "5分钟负载:"
-
msgid "15 Minute Load:"
msgstr "15分钟负载:"
msgid "40MHz 2nd channel above"
-msgstr "40MHz 2nd channel above"
+msgstr "40MHz HT40+"
msgid "40MHz 2nd channel below"
-msgstr "40MHz 2nd channel below"
+msgstr "40MHz HT40-"
+
+msgid "5 Minute Load:"
+msgstr "5分钟负载:"
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgid "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"
-msgstr "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-超网表示：地址/前缀"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
+msgid ""
+"<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/"
+"prefix"
+msgstr ""
+"<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-超网表示：地址/前"
+"缀"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 查询端口"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 服务器端口"
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the order of the resolvfile"
-msgstr "依解析文件的次序查询<abbr title=\"Domain Name System\">DNS</abbr>服务器"
+msgid ""
+"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
+"order of the resolvfile"
+msgstr ""
+"依解析文件的次序查询<abbr title=\"Domain Name System\">DNS</abbr>服务器"
msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network (CIDR)"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址或超网(CIDR)"
+msgid ""
+"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
+"(CIDR)"
+msgstr ""
+"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址或超网(CIDR)"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-网关"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 配置"
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>配置"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 名称"
-
-msgid "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection of free Lua software including an <abbr title=\"Model-View-Controller\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the Apache-License."
-msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration Interface\">LuCI</abbr>遵循Apache-License."
-
-msgid "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, flexible, and user friendly graphical interface for configuring OpenWrt Kamikaze."
-msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活的，可视化的用户界面，可用来配置OpenWrt。"
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>名称"
msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-地址"
-msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-msgstr "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-
-msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
-
msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-搜索"
-msgid "<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> leases"
-msgstr "<abbr title=\"maximal\">最大</abbr> <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>分配数目"
+msgid ""
+"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr> leases"
+msgstr ""
+"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr>分配数"
-msgid "<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for Domain Name System\">EDNS0</abbr> paket size"
-msgstr "<abbr title=\"maximal\">最大</abbr> <abbr title=\"Extension Mechanisms for Domain Name System\">EDNS0</abbr>报文大小"
+msgid ""
+"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
+"Domain Name System\">EDNS0</abbr> paket size"
+msgstr ""
+"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Extension Mechanisms for "
+"Domain Name System\">EDNS0</abbr>报文大小"
msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">最大</abbr> 并发查询"
-
-msgid "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve LuCI"
-msgstr "一个用C语言和Lua实现的为LuCI提供服务的轻量级 HTTP/1.1 web服务器。"
+msgstr "<abbr title=\"maximal\">最大</abbr>并发查询数"
-msgid "A small webserver which can be used to serve <abbr title=\"Lua Configuration Interface\">LuCI</abbr>."
-msgstr "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服务器。"
-
-msgid "AP-Isolation"
-msgstr "AP隔离"
+msgid "APN"
+msgstr "APN"
msgid "AR Support"
-msgstr "AR 支持"
+msgstr "AR支持"
-msgid "ATM Bridges"
-msgstr "ATM 桥接"
+msgid "ARP retry threshold"
+msgstr "ARP重试阈值"
-msgid "ATM Settings"
-msgstr "ATM 设置"
+msgid "ATM Bridges"
+msgstr "ATM桥接"
msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM 虚拟通道标识"
+msgstr "ATM虚拟通道标识(VCI)"
msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM 虚拟路径标识"
+msgstr "ATM虚拟路径标识(VPI)"
-msgid "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual Linux network interfaces which can be used in conjunction with DHCP or PPP to dial into the provider network."
-msgstr "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual Linux network interfaces which can be used in conjunction with DHCP or PPP to dial into the provider network."
+msgid ""
+"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
+"Linux network interfaces which can be used in conjunction with DHCP or PPP "
+"to dial into the provider network."
+msgstr ""
+"ATM桥是以AAL5协议封装以太网的虚拟Linux网桥，用于协同DHCP或PPP来拨号连接到网络"
+"提供商。"
msgid "ATM device number"
-msgstr "ATM 设备号码"
+msgstr "ATM设备号码"
+
+msgid "Accept router advertisements"
+msgstr "接收路由通告"
-msgid "About"
-msgstr "关于"
+msgid "Access Concentrator"
+msgstr "接入集中器"
msgid "Access Point"
msgstr "接入点"
-msgid "Access point (APN)"
-msgstr "接入点(APN)"
-
msgid "Action"
msgstr "动作"
msgid "Actions"
msgstr "动作"
+msgid "Activate this network"
+msgstr "激活此网络"
+
msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
msgstr "活动的<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-链路"
msgid "Active Connections"
msgstr "活动连接"
-msgid "Active IP Connections"
-msgstr "活动IP连接"
-
-msgid "Active IPv4-Routes"
-msgstr "活动的IPv4链路"
-
msgid "Active Leases"
-msgstr "活动的客户端"
+msgstr "活动客户端"
msgid "Ad-Hoc"
-msgstr "点对点(Ad-Hoc)"
+msgstr "点对点Ad-Hoc"
msgid "Add"
msgstr "添加"
-msgid "adds domain names to hostentries in the resolv file"
-msgstr "添加域名条目到主机解析文件"
-
msgid "Add local domain suffix to names served from hosts files"
-msgstr "æ·»å\8a æ\9c¬å\9c°å\9f\9få\90\8då\90\8eç¼\80å\90\8d称å\88°hosts文件"
+msgstr "æ·»å\8a æ\9c¬å\9c°å\9f\9få\90\8då\90\8eç¼\80å\88°ä¸»æ\9cº文件"
msgid "Add new interface..."
-msgstr "添加新接口"
-
-msgid "Add the Wifi network to physical network"
-msgstr "添加无线网络到物理网络"
+msgstr "添加新接口..."
msgid "Additional Hosts files"
-msgstr "额外的Hosts文件"
-
-msgid "Additional pppd options"
-msgstr "更多pppd选项"
+msgstr "附加主机文件"
msgid "Address"
msgstr "地址"
-msgid "Addresses"
-msgstr "地址"
-
-msgid "Admin Password"
-msgstr "管理密码"
+msgid "Address to access local relay bridge"
+msgstr "接入本地中继桥的地址"
msgid "Administration"
msgstr "管理界面"
msgstr "在网络上通告IPv6"
msgid "Advertised network ID"
-msgstr "通告网络ID"
+msgstr "é\80\9aå\91\8aç\9a\84ç½\91ç»\9cID"
msgid "Alert"
msgstr "警报"
-msgid "Alias"
-msgstr "别名"
-
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "允许 <abbr title=\"Secure Shell\">SSH</abbr> 密码验证"
+msgstr "允许<abbr title=\"Secure Shell\">SSH</abbr>密码验证"
msgid "Allow all except listed"
-msgstr "允许列表外的"
+msgstr "仅允许列表外"
msgid "Allow listed only"
-msgstr "仅允许列表内的"
+msgstr "仅允许列表内"
msgid "Allow localhost"
msgstr "允许本地主机"
-msgid "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr "允许的上行响应范围：127.0.0.0/8，例如：RBL服务"
+msgid "Allow remote hosts to connect to local SSH forwarded ports"
+msgstr "允许远程主机连接到本地SSH转发端口"
-msgid "Allowed range is 1 to FFFF"
-msgstr "允许范围：1 ~ FFFF"
+msgid "Allow root logins with password"
+msgstr "允许带密码的root权限登录"
-msgid "Also kernel or service logfiles can be viewed here to get an overview over their current state."
-msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
+msgid "Allow the <em>root</em> user to login with password"
+msgstr "允许<em>root</em>用户凭密码登录"
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "如果你放弃选中那将创建一个额外的新网络"
+msgid ""
+"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgstr "允许127.0.0.0/8回环范围内的上行响应，例如：RBL服务"
-msgid "And now have fun with your router!"
-msgstr "现在开始体验路由给你带来的乐趣吧!"
+msgid "Allowed range is 1 to 65535"
+msgstr "允许范围:1~65535"
+
+msgid "An additional network will be created if you leave this unchecked."
+msgstr "放弃选中将会创建一个新网络。"
msgid "Antenna 1"
msgstr "天线 1"
msgid "Antenna 2"
msgstr "天线 2"
+msgid "Any zone"
+msgstr ""
+
msgid "Apply"
msgstr "应用"
msgid "Applying changes"
msgstr "应用更改"
-msgid "As we always want to improve this interface we are looking forward to your feedback and suggestions."
-msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
-
msgid "Associated Stations"
msgstr "已连接站点"
-msgid "Attach to existing network"
-msgstr "连接现有网络"
-
msgid "Authentication"
msgstr "认证"
-msgid "Authentication Realm"
-msgstr "验证范围"
-
msgid "Authoritative"
msgstr "授权"
msgid "Authorization Required"
msgstr "需要授权"
-msgid "Automatic Disconnect"
-msgstr "自动断开"
+msgid "Auto Refresh"
+msgstr "自动刷新"
msgid "Available"
msgstr "可用"
msgid "Available packages"
-msgstr "可用的软件包"
+msgstr "可用软件包"
msgid "Average:"
msgstr "平均:"
msgid "Back"
msgstr "返回"
-msgid "Back to overview"
+msgid "Back to Overview"
msgstr "返回至概况"
-msgid "Back to Overview"
+msgid "Back to configuration"
+msgstr "返回至配置"
+
+msgid "Back to overview"
msgstr "返回至概况"
msgid "Back to scan results"
msgid "Background Scan"
msgstr "后台扫描"
+msgid "Backup / Flash Firmware"
+msgstr "备份/升级"
+
msgid "Backup / Restore"
msgstr "备份/恢复"
-msgid "Backup Archive"
-msgstr "å·²å¤\87份æ\96\87æ¡£"
+msgid "Backup file list"
+msgstr "å¤\87份æ\96\87件å\88\97表"
msgid "Bad address specified!"
msgstr "指定了错误的地址！"
+msgid ""
+"Below is the determined list of files to backup. It consists of changed "
+"configuration files marked by opkg, essential base files and the user "
+"defined backup patterns."
+msgstr ""
+"下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的备"
+"份文件。"
+
msgid "Bit Rate"
msgstr "传输速率"
msgid "Bitrate"
msgstr "传输速率"
+msgid "Bogus NX Domain Override"
+msgstr ""
+
msgid "Bridge"
msgstr "桥接"
-msgid "Bridge Port"
-msgstr "桥接端口"
-
msgid "Bridge interfaces"
msgstr "桥接接口"
msgid "Bridge unit number"
-msgstr "桥接号码"
+msgstr "桥接号"
+
+msgid "Bring up on boot"
+msgstr "开机自动运行"
+
+msgid "Buffered"
+msgstr "已缓冲"
msgid "Buttons"
msgstr "按键"
msgstr "CPU"
msgid "CPU usage (%)"
-msgstr "CPU 使用率(%)"
+msgstr "CPU使用率(%)"
+
+msgid "Cached"
+msgstr "已缓存"
msgid "Cancel"
msgstr "取消"
msgid "Chain"
msgstr "链表"
-msgid "Change the password of the system administrator (User <code>root</code>)"
-msgstr "修改管理员密码"
-
msgid "Changes"
msgstr "修改数"
msgid "Changes applied."
-msgstr "已应用的修改"
+msgstr "更改已应用。"
+
+msgid "Changes the administrator password for accessing the device"
+msgstr "修改访问设备的管理员密码"
msgid "Channel"
msgstr "信道"
msgid "Checksum"
msgstr "校验"
-msgid "Choose the firewall zone you want to assign to this interface. Select <em>unspecified</em> to remove the interface from the associated zone or fill out the <em>create</em> field to define a new zone and attach the interface to it."
-msgstr "请选择指派到此接口的防火墙区域。选择<em>未指定</em>移除接口，或者<em>添加</em>新建防火墙区域。"
+msgid ""
+"Choose the firewall zone you want to assign to this interface. Select "
+"<em>unspecified</em> to remove the interface from the associated zone or "
+"fill out the <em>create</em> field to define a new zone and attach the "
+"interface to it."
+msgstr ""
+"选择指派到此接口的防火墙区域。选中<em>未指定</em>移除已有绑定；或者填写<em>创"
+"建</em>栏以新建一个防火墙区域。"
+
+msgid ""
+"Choose the network you want to attach to this wireless interface. Select "
+"<em>unspecified</em> to not attach any network or fill out the <em>create</"
+"em> field to define a new network."
+msgstr ""
+"选择连接到此无线接口的网络。选中<em>未指定</em>不连接到任何网络；或者填写<em>"
+"创建</em>栏以新建一个网络。"
-msgid "Choose the network you want to attach to this wireless interface. Select <em>unspecified</em> to not attach any network or fill out the <em>create</em> field to define a new network."
-msgstr "请选择要连接到此无线接口的网络。选择<em>未指定</em>不连接到任何网络，或者<em>添加</em>来定义一个新网络。"
+msgid "Cipher"
+msgstr ""
-msgid "Clamp Segment Size"
-msgstr "固定段大小"
+msgid ""
+"Click \"Generate archive\" to download a tar archive of the current "
+"configuration files. To reset the firmware to its initial state, click "
+"\"Perform reset\" (only possible with squashfs images)."
+msgstr ""
+"点击\"生成备份\"即可下载以tar存档的当前配置文件。点击\"执行复位\"可恢复路由到"
+"初始的默认配置状态(仅squashfs格式的固件有效)。"
msgid "Client"
msgstr "客户端"
-msgid "Client + WDS"
-msgstr "客户端+WDS"
+msgid "Client ID to send when requesting DHCP"
+msgstr "请求DHCP时发送的客户ID"
+
+msgid ""
+"Close inactive connection after the given amount of seconds, use 0 to "
+"persist connection"
+msgstr "在给定的时间后自动关闭非活动链接(秒)，值0为持续连接"
+
+msgid "Close list..."
+msgstr "关闭列表..."
msgid "Collecting data..."
msgstr "收集信息中..."
msgstr "设置/更改"
msgid "Configuration / Revert"
-msgstr "设置/恢复"
-
-msgid "Configuration applied"
-msgstr "设置已应用"
+msgstr "设置/放弃"
-msgid "Configuration file"
-msgstr "配置文件"
+msgid "Configuration applied."
+msgstr "设置已应用。"
-msgid "Configure the local DNS server to use the name servers adverticed by the PPP peer"
-msgstr "本地DNS服务器使用PPP对等连接提供的建议"
+msgid "Configuration files will be kept."
+msgstr "配置文件将被保存。"
msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "对于block-extroot则设置挂载为overlay存储 "
+msgstr "对于block-extroot则设置挂载到overlay存储"
msgid "Confirmation"
msgstr "确认密码"
+msgid "Connect"
+msgstr "连接"
+
msgid "Connected"
msgstr "已连接"
-msgid "Connect script"
-msgstr "连接脚本"
-
msgid "Connection Limit"
msgstr "连接受限"
-msgid "Connection timeout"
-msgstr "连接超时"
-
-msgid "Contributing Developers"
-msgstr "特别致谢"
+msgid "Connections"
+msgstr "链接"
msgid "Country"
msgstr "国家"
msgid "Create Interface"
msgstr "创建接口"
-msgid "Create Or Attach Network"
-msgstr "创建/连接 网络"
-
msgid "Create Network"
msgstr "创建网络"
msgid "Create a bridge over multiple interfaces"
msgstr "在多个接口间创建网桥"
-msgid "Create backup"
-msgstr "创建备份"
-
msgid "Critical"
msgstr "紧要"
msgid "Cron Log Level"
msgstr "Cron日志级别"
-msgid "Custom Files"
-msgstr "自定义文件"
-
msgid "Custom Interface"
msgstr "自定义接口"
-msgid "Custom files"
-msgstr "自定义文件"
-
-msgid "Customizes the behaviour of the device <abbr title=\"Light Emitting Diode\">LED</abbr>s if possible."
-msgstr "自定义<abbr title=\"Light Emitting Diode\">LED</abbr>行为。"
+msgid ""
+"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
+"\">LED</abbr>s if possible."
+msgstr "自定义<abbr title=\"Light Emitting Diode\">LED</abbr>的活动状态。"
msgid "DHCP Leases"
-msgstr "DHCP 分配"
+msgstr "DHCP分配"
msgid "DHCP Server"
-msgstr "DHCP 服务器"
+msgstr "DHCP服务器"
+
+msgid "DHCP and DNS"
+msgstr "DHCP/DNS"
-msgid "DHCP assigned"
-msgstr "DHCP有效分配"
+msgid "DHCP client"
+msgstr "DHCP客户端"
msgid "DHCP-Options"
-msgstr "DHCP-附加选项"
+msgstr "DHCP-选项"
+
+msgid "DNS"
+msgstr "DNS"
msgid "DNS forwardings"
-msgstr "DNS 转发"
+msgstr "DNS转发"
msgid "Debug"
msgstr "调试"
+msgid "Default %d"
+msgstr "默认%d"
+
+msgid "Default gateway"
+msgstr "默认网关"
+
msgid "Default state"
msgstr "默认状态"
msgid "Define a name for this network."
-msgstr "定义此网络的名称"
+msgstr "定义此网络的名称。"
-msgid "Define additional DHCP options, for example \"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS servers to clients."
-msgstr "定义DHCP的附加选项，例如设定\"<code>6,192.168.2.1,192.168.2.2</code>\"表示通告不同的DNS服务器给客户端。"
+msgid ""
+"Define additional DHCP options, for example "
+"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
+"servers to clients."
+msgstr ""
+"设置DHCP的附加选项，例如设定\"<code>6,192.168.2.1,192.168.2.2</code>\"表示通"
+"告不同的DNS服务器给客户端。"
msgid "Delete"
msgstr "删除"
msgid "Destination"
msgstr "目的地址"
-msgid "Detected Files"
-msgstr "查询到的文件"
-
-msgid "Detected files"
-msgstr "查询到的文件"
-
msgid "Device"
msgstr "设备"
-msgid "Devices"
-msgstr "设备"
-
msgid "Device Configuration"
msgstr "设备配置"
msgid "Diagnostics"
msgstr "诊断"
-msgid "Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for this interface."
-msgstr "禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
+msgid "Directory"
+msgstr "目录"
+
+msgid "Disable"
+msgstr "禁用"
+
+msgid ""
+"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
+"this interface."
+msgstr ""
+"禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>。"
+
+msgid "Disable DNS setup"
+msgstr "禁用DNS设置"
msgid "Disable HW-Beacon timer"
msgstr "禁用硬件Beacon时钟"
+msgid "Disabled"
+msgstr "禁用"
+
msgid "Discard upstream RFC1918 responses"
-msgstr "丢弃本地地址的上行响应数据(RFC1918)"
+msgstr "丢弃RFC1918上行响应数据"
-msgid "Disconnect script"
-msgstr "断开脚本"
+msgid "Displaying only packages containing"
+msgstr "只显示内含软件包"
msgid "Distance Optimization"
msgstr "距离优化"
msgid "Distance to farthest network member in meters."
-msgstr "为远距离客户提供优化"
+msgstr "最远客户端的距离,单位:米。"
msgid "Diversity"
msgstr "分集"
-msgid "Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> firewalls"
-msgstr "Dnsmasq是一个结合了<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>服务器和<abbr title=\"Domain Name System\">DNS</abbr>转发器的小工具，服务于<abbr title=\"Network Address Translation\">NAT</abbr>防火墙。"
+msgid ""
+"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
+"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
+"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
+"firewalls"
+msgstr ""
+"Dnsmasq是一个结合了<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>服务器和<abbr title=\"Domain Name System\">DNS</abbr>转发器的小工具，服"
+"务于<abbr title=\"Network Address Translation\">NAT</abbr>防火墙。"
msgid "Do not cache negative replies, e.g. for not existing domains"
msgstr "不缓存错误的应答，例如不存在的域名"
msgstr "不查找本地网络"
msgid "Do not send probe responses"
-msgstr "不发送探测回应"
-
-msgid "Document root"
-msgstr "根文档"
+msgstr "不回送探测响应"
msgid "Domain required"
-msgstr "必选域名"
+msgstr "需要域名"
msgid "Domain whitelist"
msgstr "域名白名单"
-msgid "Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without <abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr "不转发无<abbr title=\"Domain Name System\">DNS</abbr>名称的<abbr title=\"Domain Name System\">DNS</abbr>请求"
+msgid ""
+"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
+"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
+msgstr ""
+"不转发无<abbr title=\"Domain Name System\">DNS</abbr>名称的<abbr title="
+"\"Domain Name System\">DNS</abbr>请求"
msgid "Download and install package"
msgstr "下载并安装软件包"
-msgid "Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr "Dropbear提供了集成的<abbr title=\"Secure Copy\">SCP</abbr>服务器和基于<abbr title=\"Secure Shell\">SSH</abbr>的shell访问。"
+msgid "Download backup"
+msgstr "下载备份"
+
+msgid "Dropbear Instance"
+msgstr "Dropbear实例"
+
+msgid ""
+"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
+"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
+msgstr ""
+"Dropbear提供了集成的<abbr title=\"Secure Copy\">SCP</abbr>服务器和基于<abbr "
+"title=\"Secure Shell\">SSH</abbr>的shell访问"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr "动态<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgid "Dynamically allocate DHCP addresses for clients. If disabled, only clients having static leases will be served."
-msgstr "动态地分配DHCP地址给客户端。如果禁用，则只能为静态租用表中的客户端提供服务。"
+msgid "Dynamic tunnel"
+msgstr "动态隧道"
+
+msgid ""
+"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
+"having static leases will be served."
+msgstr ""
+"动态地分配DHCP地址给客户端。如果禁用，则只能为静态租用表中的客户端提供网络服"
+"务。"
msgid "EAP-Method"
msgstr "EAP-Method"
msgid "Edit"
msgstr "修改"
-msgid "Edit package lists and installation targets"
-msgstr "编辑软件包的同步源和安装地址"
-
msgid "Edit this interface"
msgstr "修改此接口"
msgid "Emergency"
msgstr "紧急"
-msgid "enable"
+msgid "Enable"
msgstr "启用"
-msgid "Enable 4K VLANs"
-msgstr "开启 4K VLANs"
-
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "开启 <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
+msgstr "开启<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
+
+msgid "Enable HE.net dynamic endpoint update"
+msgstr "开启HE.net动态终端更新"
-msgid "Enable IPv6 on PPP link"
-msgstr "å\9c¨PPPé\93¾è·¯ä¸\8aå\90¯ç\94¨IPv6"
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr "å\9c¨PPPé\93¾è·¯ä¸\8aå¼\80å\90¯IPv6å\8d\8få\95\86"
-msgid "Enable Keep-Alive"
-msgstr "开启保持活动 Keep-Alive"
+msgid "Enable Jumbo Frame passthrough"
+msgstr "开启巨桢直通"
msgid "Enable TFTP server"
msgstr "开启TFTP服务器"
msgid "Enable VLAN functionality"
-msgstr "开启VLAN支持"
+msgstr "开启VLAN功能"
+
+msgid "Enable buffering"
+msgstr "开启缓冲"
+
+msgid "Enable builtin NTP server"
+msgstr "开启内置NTP服务器"
-msgid "Enable device"
-msgstr "开启设备"
+msgid "Enable learning and aging"
+msgstr "开启learning和aging"
msgid "Enable this mount"
msgstr "开启挂载mount"
msgid "Enable this swap"
msgstr "开启挂载swap"
-msgid "Enable this switch"
-msgstr "å¼\80å\90¯äº¤æ\8d¢æ\9cº"
+msgid "Enable/Disable"
+msgstr "å\90¯ç\94¨/ç¦\81ç\94¨"
msgid "Enabled"
-msgstr "å·²å\90¯ç\94¨"
+msgstr "启用"
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "在此桥接上启用生成协议树"
msgid "Encryption"
msgstr "加密"
-msgid "Error"
-msgstr "错误"
+msgid "Erasing..."
+msgstr "删除中..."
-msgid "Errors"
+msgid "Error"
msgstr "错误"
-msgid "Essentials"
-msgstr "概要"
-
msgid "Ethernet Adapter"
msgstr "以太网适配器"
-msgid "Ethernet Bridge"
-msgstr "以太网桥"
-
msgid "Ethernet Switch"
msgstr "以太网交换机"
msgid "Expires"
msgstr "到期时间"
-msgid "Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr "地址租约过期时间，最小为2分钟(<code>2m</code>)。"
+msgid ""
+"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
+msgstr "地址租用过期时间，最小为2分钟(<code>2m</code>)。"
msgid "External system log server"
msgstr "外部系统日志服务器"
msgid "Fast Frames"
msgstr "快速帧"
-msgid "Filename of the boot image advertised to clients"
-msgstr "向客户端通告启动镜像文件名"
+msgid "File"
+msgstr "文件"
-msgid "Files to be kept when flashing a new firmware"
-msgstr "更新固件时被保存的文件"
+msgid "Filename of the boot image advertised to clients"
+msgstr "向客户端通告的启动镜像文件名"
msgid "Filesystem"
msgstr "文件系统"
msgid "Firewall Status"
msgstr "防火墙状态"
-msgid "Firmware image"
-msgstr "固件文件"
-
msgid "Firmware Version"
msgstr "固件版本"
msgid "Fixed source port for outbound DNS queries"
msgstr "固定出站DNS查询的源端口"
-msgid "Fixes problems with unreachable websites, submitting forms or other unexpected behaviour for some ISPs."
-msgstr "修复某些ISP的不可达网站或其他未知错误"
-
msgid "Flags"
msgstr "标志"
msgid "Flash Firmware"
msgstr "升级固件"
-msgid "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of Windows-systems"
-msgstr "过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
+msgid "Flash image..."
+msgstr "刷新固件..."
+
+msgid "Flash new firmware image"
+msgstr "刷新固件"
+
+msgid "Flash operations"
+msgstr "刷新操作"
+
+msgid "Flashing..."
+msgstr "刷新中..."
msgid "Force"
msgstr "强制"
+msgid "Force CCMP (AES)"
+msgstr ""
+
msgid "Force DHCP on this network even if another server is detected."
-msgstr "在探测到有其他DHCP服务器的情况下也强制启动DHCP。"
+msgstr "在本网络探测到有其他DHCP服务器的情况下也强制启动DHCP。"
+
+msgid "Force TKIP"
+msgstr ""
+
+msgid "Force TKIP and CCMP (AES)"
+msgstr ""
+
+msgid "Forward DHCP traffic"
+msgstr "转发DHCP数据包"
+
+msgid "Forward broadcast traffic"
+msgstr "转发广播数据包"
msgid "Forwarding mode"
msgstr "转发模式"
msgid "Fragmentation Threshold"
-msgstr "分片阈值(依据MTU)"
+msgstr "分片阈值"
msgid "Frame Bursting"
msgstr "桢突发"
+msgid "Free"
+msgstr "空闲"
+
msgid "Free space"
msgstr "空闲空间"
msgid "Gateway"
msgstr "网关"
-msgid "General"
-msgstr "基本信息"
+msgid "Gateway ports"
+msgstr "网关端口"
msgid "General Settings"
msgstr "基本设置"
msgid "General Setup"
msgstr "基本设置"
+msgid "Generate archive"
+msgstr "生成备份"
+
+msgid "Given password confirmation did not match, password not changed!"
+msgstr "输入的确认密码不匹配，密码未更改！"
+
+msgid "Go to password configuration..."
+msgstr "转到密码配置页..."
+
msgid "Go to relevant configuration page"
msgstr "转到相关配置页"
-msgid "HE.net Tunnel ID"
-msgstr "HE.net隧道ID"
+msgid "HE.net password"
+msgstr "HE.net密码"
+
+msgid "HE.net user ID"
+msgstr "HE.net用户ID"
msgid "HT capabilities"
-msgstr "HT 功能"
+msgstr "HT功能"
msgid "HT mode"
-msgstr "HT 模式"
+msgstr "HT模式"
msgid "Handler"
msgstr "处理程序"
msgid "Hang Up"
msgstr "挂起"
-msgid "Hardware Address"
-msgstr "硬件地址"
-
-msgid "Hello!"
-msgstr "Hello!"
-
-msgid "Here you can backup and restore your router configuration and - if possible - reset the router to the default settings."
-msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
-
-msgid "Here you can configure installed wifi devices."
-msgstr "这里可以配置已安装的无线设备。"
-
-msgid "Here you can configure the basic aspects of your device like its hostname or the timezone."
+msgid ""
+"Here you can configure the basic aspects of your device like its hostname or "
+"the timezone."
msgstr "这里可以配置路由器的部分基本信息，比如主机名和时区。"
-msgid "Here you can customize the settings and the functionality of <abbr title=\"Lua Configuration Interface\">LuCI</abbr>."
-msgstr "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组件和功能。"
-
-msgid "Here you can find information about the current system status like <abbr title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory usage or network interface data."
-msgstr "这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit\">CPU</abbr>频率、内存使用率或网络链接数据。"
-
-msgid "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys (one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key authentication."
-msgstr "这里可以粘贴<abbr title=\"Secure Shell\">SSH</abbr>公用密钥以用于<abbr title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
+msgid ""
+"Here you can paste public SSH-Keys (one per line) for SSH public-key "
+"authentication."
+msgstr "这里可以粘贴公用SSH密钥以用于SSH公共密钥认证(每行一个密钥)。"
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "隐藏<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgid "Host entries"
-msgstr "主机记录"
+msgstr "主机条目"
+
+msgid "Host expiry timeout"
+msgstr "主机超期"
msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
msgstr "主机-<abbr title=\"Internet Protocol Address\">IP</abbr>或网络"
msgid "Hostname"
msgstr "主机名"
+msgid "Hostname to send when requesting DHCP"
+msgstr "请求DHCP时发送的主机名"
+
msgid "Hostnames"
msgstr "主机名"
-msgid "ID"
-msgstr "ID"
-
-msgid "IP Configuration"
-msgstr "IP设置"
-
msgid "IP address"
msgstr "IP地址"
msgid "IP-Aliases"
-msgstr "IP别名"
+msgstr "IP-别名"
msgid "IPv4"
msgstr "IPv4"
msgid "IPv4 Firewall"
-msgstr "IPv4 防火墙"
+msgstr "IPv4防火墙"
+
+msgid "IPv4 WAN Status"
+msgstr "IPv4 WAN状态"
+
+msgid "IPv4 address"
+msgstr "IPv4地址"
+
+msgid "IPv4 and IPv6"
+msgstr "IPv4和IPv6"
+
+msgid "IPv4 broadcast"
+msgstr "IPv4广播"
+
+msgid "IPv4 gateway"
+msgstr "IPv4网关"
+
+msgid "IPv4 netmask"
+msgstr "IPv4子网掩码"
+
+msgid "IPv4 only"
+msgstr "仅IPv4"
msgid "IPv4-Address"
msgstr "IPv4-地址"
msgstr "IPv6"
msgid "IPv6 Firewall"
-msgstr "IPv6 防火墙"
+msgstr "IPv6防火墙"
msgid "IPv6 Setup"
msgstr "IPv6设置"
+msgid "IPv6 WAN Status"
+msgstr "IPv6 WAN状态"
+
+msgid "IPv6 address"
+msgstr "IPv6地址"
+
+msgid "IPv6 gateway"
+msgstr "IPv6网关"
+
+msgid "IPv6 only"
+msgstr "仅IPv6"
+
+msgid "IPv6-in-IPv4 (RFC4213)"
+msgstr "IPv6-in-IPv4 (RFC4213)"
+
+msgid "IPv6-over-IPv4"
+msgstr "IPv6-over-IPv4"
+
msgid "Identity"
msgstr "鉴权"
-msgid "If specified, mount the device by its UUID instead of a fixed device node"
-msgstr "如果设备指定了UUID，则用其取代既定的设备节点来挂载设备"
+msgid ""
+"If specified, mount the device by its UUID instead of a fixed device node"
+msgstr "如果设备指定了UUID，则用其来挂载设备"
+
+msgid ""
+"If specified, mount the device by the partition label instead of a fixed "
+"device node"
+msgstr "如果设备指定了卷标，则用其来挂载设备"
-msgid "If specified, mount the device by the partition label instead of a fixed device node"
-msgstr "如果设备指定了卷标，则用其取代既定的设备节点来挂载设备"
+msgid "If unchecked, no default route is configured"
+msgstr "如果未选中，则不配置默认路由"
-msgid "If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable <abbr title=\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr "如果物理内存不足，暂时不用的数据可以交换到swap设备暂存，从而得到更多的可用内存。应了解的是，访问swap设备比访问<abbr title=\"Random Access Memory\">RAM</abbr>要慢不少。"
+msgid "If unchecked, the advertised DNS server addresses are ignored"
+msgstr "如果未选中，则忽略所通告的DNS服务器地址"
-msgid "If the interface is attached to an existing network it will be <em>bridged</em> to the existing interfaces and is covered by the firewall zone of the choosen network.<br />Uncheck the attach option to define a new standalone network for this interface."
-msgstr "如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙区域覆盖。取消附加选项可以重定义此接口为新的独立网络。"
+msgid ""
+"If your physical memory is insufficient unused data can be temporarily "
+"swapped to a swap-device resulting in a higher amount of usable <abbr title="
+"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
+"slow process as the swap-device cannot be accessed with the high datarates "
+"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
+msgstr ""
+"如果物理内存不足，暂时不用的数据可以交换到swap设备暂存，以得到更多的可用内存"
+"<abbr title=\"Random Access Memory\">RAM</abbr>。但是访问swap设备比访问内存"
+"<abbr title=\"Random Access Memory\">RAM</abbr>的速度慢。"
msgid "Ignore Hosts files"
-msgstr "忽略Hosts文件"
+msgstr "忽略主机文件"
msgid "Ignore interface"
-msgstr "关闭 DHCP"
+msgstr "关闭DHCP"
msgid "Ignore resolve file"
msgstr "忽略解析文件"
-msgid "Ignore <code>/etc/hosts</code>"
-msgstr "忽略 <code>/etc/hosts</code>"
+msgid "Image"
+msgstr "映像文件"
msgid "In"
msgstr "入口"
+msgid "Inactivity timeout"
+msgstr "活动超时"
+
msgid "Inbound:"
msgstr "入站:"
-msgid "Independent (Ad-Hoc)"
-msgstr "独立(点对点Ad-Hoc)"
-
msgid "Info"
msgstr "信息"
+msgid "Initscript"
+msgstr "启动脚本"
+
+msgid "Initscripts"
+msgstr "启动脚本"
+
msgid "Install"
msgstr "安装"
-msgid "Installation targets"
-msgstr "安装位置"
+msgid "Install package %q"
+msgstr "安装软件包%q"
+
+msgid "Install protocol extensions..."
+msgstr "安装协议扩展..."
msgid "Installed packages"
msgstr "已安装软件包"
msgid "Interface Overview"
msgstr "接口总览"
-msgid "Interface Status"
-msgstr "接口状态"
-
msgid "Interface is reconnecting..."
msgstr "重新连接中..."
msgstr "正在关闭..."
msgid "Interface not present or not connected yet."
-msgstr "接口尚未开启或连接"
+msgstr "接口尚未开启或连接。"
msgid "Interface reconnected"
msgstr "接口已重新连接"
msgid "Interface shut down"
-msgstr "断开接口"
+msgstr "关闭接口"
msgid "Interfaces"
msgstr "接口"
-msgid "Internet Connection"
-msgstr "网络连接"
-
msgid "Invalid"
msgstr "输入错误"
msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "非法的VLAN号！只允许从 %d 到 %d 。"
+msgstr "无效的VLAN ID！只允许 %d 至 %d 之间。"
-msgid "Invalid username and/or password! Please try again."
-msgstr "用户名或密码错误，请重试。"
+msgid "Invalid VLAN ID given! Only unique IDs are allowed"
+msgstr "无效的VLAN ID！禁止重复的ID"
-msgid "It appears that you try to flash an image that does not fit into the flash memory, please verify the image file!"
-msgstr "试图刷写一个会变砖的固件，路由器鸭梨很大，请验证！"
+msgid "Invalid username and/or password! Please try again."
+msgstr "用户名或密码错误！请重试。"
-msgid "IPv4 WAN Status"
-msgstr "IPv4 WAN 状态"
+msgid ""
+"It appears that you try to flash an image that does not fit into the flash "
+"memory, please verify the image file!"
+msgstr "试图刷入一个会变砖的固件，路由器鸭梨很大，请验证！"
msgid "Java Script required!"
-msgstr "需要 Java Script！"
-
-msgid "Join (Client)"
-msgstr "加入(客户端)"
+msgstr "需要Java Script！"
msgid "Join Network"
msgstr "加入网络"
msgid "Join Network: Wireless Scan"
msgstr "加入网络:搜索无线"
-msgid "KB"
-msgstr "KB"
-
-msgid "Keep configuration files"
+msgid "Keep settings"
msgstr "保留配置"
-msgid "Keep-Alive"
-msgstr "保持活动Keep-Alive"
-
-msgid "Kernel"
-msgstr "内核"
-
msgid "Kernel Log"
msgstr "内核日志"
msgid "Kill"
msgstr "强制清理"
+msgid "LCP echo failure threshold"
+msgstr "LCP响应故障阈值"
+
+msgid "LCP echo interval"
+msgstr "LCP响应间隔"
+
msgid "LLC"
msgstr "逻辑链路控制LLC"
msgid "Label"
-msgstr "标签"
+msgstr "卷标"
msgid "Language"
msgstr "语言"
msgid "Language and Style"
-msgstr "语言和外观"
-
-msgid "Lead Development"
-msgstr "开发向导"
+msgstr "语言和界面"
-msgid "Leases"
-msgstr "ç§\9f约"
+msgid "Lease validity time"
+msgstr "ç§\9fç\94¨æ\9c\89æ\95\88æ\97¶é\97´"
msgid "Leasefile"
msgstr "租约文件"
msgid "Leasetime"
-msgstr "ç§\9f约è¿\87æ\9c\9f"
+msgstr "ç§\9fç\94¨æ\97¶é\97´"
msgid "Leasetime remaining"
msgstr "租约剩余"
-msgid "Legend:"
-msgstr "图例："
-
-msgid "Let pppd replace the current default route to use the PPP interface after successful connect"
-msgstr "pppd连接成功后设为默认路由"
+msgid "Leave empty to autodetect"
+msgstr "留空则自动探测"
-msgid "Let pppd run this script after establishing the PPP link"
-msgstr "PPP连接建立后运行此脚本"
+msgid "Leave empty to use the current WAN address"
+msgstr "留空则使用当前WAN地址"
-msgid "Let pppd run this script before tearing down the PPP link"
-msgstr "PPP连接断开前运行此脚本"
+msgid "Legend:"
+msgstr "图例："
msgid "Limit"
-msgstr "最大"
+msgstr "限制"
msgid "Link"
msgstr "链接"
msgid "Link On"
-msgstr "已链接"
+msgstr "活动链接"
-msgid "List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward requests to"
+msgid ""
+"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
+"requests to"
msgstr "<abbr title=\"Domain Name System\">DNS</abbr>服务器转发请求表"
msgid "List of domains to allow RFC1918 responses for"
msgstr "允许RFC1918响应的域名表"
+msgid "List of hosts that supply bogus NX domain results"
+msgstr ""
+
+msgid "Listen only on the given interface or, if unspecified, on all"
+msgstr "监听指定的接口；若未指定则监听全部"
+
msgid "Listening port for inbound DNS queries"
msgstr "入站DNS查询的监听端口"
msgid "Loading"
msgstr "载入中"
+msgid "Local IPv4 address"
+msgstr "本地IPv4地址"
+
+msgid "Local IPv6 address"
+msgstr "本地IPv6地址"
+
+msgid "Local Startup"
+msgstr "本地启动脚本"
+
msgid "Local Time"
msgstr "本地时间"
msgid "Local domain"
msgstr "本地域名"
-msgid "Local domain specification. Names matching this domain are never forwared and resolved from DHCP or hosts files only"
-msgstr "本地域名规则。从不转发和处理只源自DHCP或Hosts文件的本地域名数据"
+msgid ""
+"Local domain specification. Names matching this domain are never forwared "
+"and resolved from DHCP or hosts files only"
+msgstr "本地域名规则。从不转发和处理只源自DHCP或主机文件的本地域名数据"
msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr "本地域名后缀追加到DHCP和Hosts文件条目"
-
-msgid "localises the hostname depending on its subnet"
-msgstr "根据子网本地化主机名"
+msgstr "本地域名后缀追加到DHCP和主机文件条目"
msgid "Local server"
msgstr "本地服务器"
-msgid "Localise hostname depending on the requesting subnet if multiple IPs are available"
-msgstr "如果多个IP可用，则依赖于请求子网来定位hostname"
+msgid ""
+"Localise hostname depending on the requesting subnet if multiple IPs are "
+"available"
+msgstr "如果有多个IP，则依赖于请求子网来查询主机名"
msgid "Localise queries"
-msgstr "定位查询"
+msgstr "本地化查询"
+
+msgid "Locked to channel %d used by %s"
+msgstr "%s使用的隧道锁定到%d"
msgid "Log output level"
msgstr "日志记录等级"
msgid "Logout"
msgstr "退出"
-msgid "LuCI Components"
-msgstr "LuCI 组件"
-
msgid "Lowest leased address as offset from the network address."
-msgstr "分配IP的最小值"
+msgstr "网络地址的起始分配基址。"
msgid "MAC"
-msgstr "硬件地址"
+msgstr "MAC"
msgid "MAC Address"
msgstr "MAC地址"
msgstr "MAC-地址过滤"
msgid "MAC-Filter"
-msgstr "MAC-过滤器"
-
-msgid "Memory"
-msgstr "内存"
+msgstr "MAC-过滤"
msgid "MAC-List"
msgstr "MAC-列表"
msgid "MTU"
msgstr "MTU"
-msgid "Make sure that you provide the correct pin code here or you might lock your sim card!"
-msgstr "请确认pin码正确，并且没有锁定你的sim卡。"
-
-msgid "Master"
-msgstr "Master"
-
-msgid "Master + WDS"
-msgstr "Master + WDS"
-
msgid "Maximum Rate"
msgstr "最高速率"
msgid "Maximum allowed number of active DHCP leases"
-msgstr "å\85\81许ç\9a\84æ\9c\80大活è·\83DHCPç§\9f约数"
+msgstr "å\85\81许ç\9a\84æ\9c\80大活è·\83DHCPç§\9fç\94¨数"
msgid "Maximum allowed number of concurrent DNS queries"
msgstr "允许的最大并发DNS查询数"
msgid "Maximum allowed size of EDNS.0 UDP packets"
msgstr "允许的最大EDNS.0 UDP报文大小"
+msgid "Maximum amount of seconds to wait for the modem to become ready"
+msgstr "modem就绪的最大等待时间(秒)"
+
msgid "Maximum hold time"
-msgstr "æ\9c\80大æ\9c\89æ\95\88时间"
+msgstr "æ\9c\80大æ\8c\81ç»时间"
msgid "Maximum number of leased addresses."
-msgstr "最大租约地址数量"
+msgstr "最大地址分配数量。"
+
+msgid "Memory"
+msgstr "内存"
msgid "Memory usage (%)"
msgstr "内存使用率(%)"
msgstr "最低速率"
msgid "Minimum hold time"
-msgstr "最低有效时间"
+msgstr "最低保持时间"
+
+msgid "Missing protocol extension for proto %q"
+msgstr "缺少协议%q的协议扩展"
msgid "Mode"
msgstr "模式"
msgid "Modem device"
-msgstr "Modem 设备"
+msgstr "Modem设备"
+
+msgid "Modem init timeout"
+msgstr "modem初始化超时"
msgid "Monitor"
msgstr "监听"
-msgid "Most of them are network servers, that offer a certain service for your device or network like shell access, serving webpages like <abbr title=\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending e-mails, ..."
-msgstr "这些大部分是为设备或网络提供特定服务的，比如shell访问，路由转换，发送E-mail等..."
-
msgid "Mount Entry"
msgstr "挂载项"
msgid "Mount Points - Swap Entry"
msgstr "挂载点-Swap"
-msgid "Mount Points define at which point a memory device will be attached to the filesystem"
-msgstr "挂载点可以设置设备被挂载在文件系统中的位置。"
+msgid ""
+"Mount Points define at which point a memory device will be attached to the "
+"filesystem"
+msgstr "挂载点可配置存储设备挂载到文件系统中的位置和参数。"
msgid "Mount options"
msgstr "挂载选项"
+msgid "Mount point"
+msgstr "挂载点"
+
msgid "Mounted file systems"
msgstr "已挂载的文件系统"
msgid "Multicast Rate"
msgstr "组播速率"
+msgid "Multicast address"
+msgstr "组播地址"
+
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NTP server candidates"
+msgstr "候选NTP服务器"
+
msgid "Name"
msgstr "名称"
msgid "Navigation"
msgstr "导航"
-msgid "Network"
-msgstr "网络"
-
msgid "Netmask"
msgstr "子网掩码"
+msgid "Network"
+msgstr "网络"
+
msgid "Network Utilities"
msgstr "网络工具"
msgid "Next »"
msgstr "下一步 »"
-msgid "No address configured on this interface."
-msgstr "本接口未设置地址"
+msgid "No DHCP Server configured for this interface"
+msgstr "本接口未配置DHCP服务器"
msgid "No chains in this table"
-msgstr "本表中没有链路"
+msgstr "本表格中没有链表"
msgid "No files found"
msgstr "文件未找到"
msgid "No network configured on this device"
msgstr "本设备未配置网络"
+msgid "No network name specified"
+msgstr "未指定网络名"
+
+msgid "No package lists available"
+msgstr "无可用软件列表"
+
msgid "No password set!"
msgstr "未设置密码！"
msgid "No rules in this chain"
-msgstr "本链路没有规则"
+msgstr "本链表没有规则"
+
+msgid "No zone assigned"
+msgstr "未分配区域"
msgid "Noise"
msgstr "噪声"
+msgid "Noise:"
+msgstr "噪声:"
+
msgid "None"
msgstr "无"
msgid "Not associated"
msgstr "未关联"
-msgid "Not configured"
-msgstr "æ\9cªè®¾ç½®"
+msgid "Note: Configuration files will be erased."
+msgstr "注æ\84\8fï¼\9aé\85\8dç½®æ\96\87件å°\86被å\88 é\99¤ã\80\82"
-msgid "Note: If you choose an interface here which is part of another network, it will be moved into this network."
-msgstr "注意:如果你在此处选择的接口是另一个网络的一部分，那将会迁入此网络。"
+msgid ""
+"Note: If you choose an interface here which is part of another network, it "
+"will be moved into this network."
+msgstr "注意：如果此处选择的接口从属于另一个网络，那将会迁入那个网络。"
msgid "Notice"
msgstr "注意"
-msgid "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> changes have to be confirmed by clicking Changes - Save & Apply before being applied."
-msgstr "注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保存&应用 后设置才会生效。"
-
-msgid "Number of failed connection tests to initiate automatic reconnect"
-msgstr "用于启动自动重新连接的失败连接尝试数目"
-
-msgid "On the following pages you can adjust all important settings of your router."
-msgstr "本页可以设置路由器的重要参数。"
-
msgid "OK"
msgstr "OK"
-msgid "OPKG error code %i"
-msgstr "OPKG 错误代码 %i"
-
msgid "OPKG-Configuration"
msgstr "OPKG-配置"
msgid "Off-State Delay"
msgstr "关态延迟"
-msgid "On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: <samp>eth0.1</samp>)."
-msgstr "本页可配置网络接口。选中\"桥接接口\"可把几个接口组合配置成网桥，\"接口\"加入的多个接口须用空格隔开，也可用INTERFACE.VLANNR来标记 <abbr title=\"Virtual Local Area Network\">VLAN</abbr> 。(<abbr title=\"for example\">例如</abbr>: <samp>eth0.1</samp>)"
+msgid ""
+"On this page you can configure the network interfaces. You can bridge "
+"several interfaces by ticking the \"bridge interfaces\" field and enter the "
+"names of several network interfaces separated by spaces. You can also use "
+"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
+"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
+"<samp>eth0.1</samp>)."
+msgstr ""
+"本页可配置网络接口。选中\"桥接接口\"可把几个接口组合配置成网桥，自定义添加的"
+"多个接口名须用空格隔开，也可用 <abbr title=\"Virtual Local Area Network"
+"\">VLAN</abbr> 来标记<samp>INTERFACE.VLANNR</samp> 。(<abbr title=\"for "
+"example\">例如</abbr>:<samp>eth0.1</samp>)。"
msgid "On-State Delay"
-msgstr "开起延迟"
+msgstr "通态延迟"
msgid "One or more fields contain invalid values!"
msgstr "一个或多个选项键值有误！"
msgid "Open"
msgstr "开启"
+msgid "Open list..."
+msgstr "打开列表..."
+
msgid "Option changed"
-msgstr "修改的设置"
+msgstr "修改的选项"
msgid "Option removed"
-msgstr "放弃的设置"
+msgstr "移除的选项"
msgid "Options"
-msgstr "设置"
+msgstr "选项"
msgid "Other:"
msgstr "其余:"
msgid "Outdoor Channels"
msgstr "户外信道"
-msgid "Override the netmask sent to clients. Normally it is calculated from the subnet that is served."
-msgstr "更新发送给客户端的子网掩码。这通常由子网计算得出。"
+msgid "Override MAC address"
+msgstr "更新MAC地址"
-msgid "Overview"
+msgid "Override MTU"
+msgstr "更新MTU"
+
+msgid "Override the gateway in DHCP responses"
+msgstr "更新网关"
+
+msgid ""
+"Override the netmask sent to clients. Normally it is calculated from the "
+"subnet that is served."
+msgstr "更新发送给客户端的子网掩码。这通常由子网算出。"
+
+msgid "Override the table used for internal routes"
+msgstr "更新内部路由表"
+
+msgid "Overview"
msgstr "总览"
msgid "Owner"
msgstr "所有者"
+msgid "PAP/CHAP password"
+msgstr "PAP/CHAP密码"
+
+msgid "PAP/CHAP username"
+msgstr "PAP/CHAP用户名"
+
msgid "PID"
msgstr "PID"
-msgid "PIN code"
-msgstr "PIN 码"
+msgid "PIN"
+msgstr "PIN"
-msgid "PPP Settings"
-msgstr "PPP 设置"
+msgid "PPP"
+msgstr "PPP"
msgid "PPPoA Encapsulation"
msgstr "PPPoA封包"
-msgid "Package libiwinfo required!"
-msgstr "软件包需要libiwinfo！"
+msgid "PPPoATM"
+msgstr "PPPoATM"
-msgid "Package lists"
-msgstr "软件包列表"
+msgid "PPPoE"
+msgstr "PPPoE"
+
+msgid "PPtP"
+msgstr "PPtP"
+
+msgid "Package libiwinfo required!"
+msgstr "需要libiwinfo软件包！"
-msgid "Package lists updated"
-msgstr "已更新的软件包列表"
+msgid "Package lists are older than 24 hours"
+msgstr "软件包列表已超24小时未更新"
msgid "Package name"
msgstr "软件包名称"
msgid "Packets"
msgstr "数据包"
+msgid "Part of zone %q"
+msgstr "区域 %q"
+
msgid "Password"
msgstr "密码"
msgid "Password of Private Key"
msgstr "私有密钥"
-msgid "Password successfully changed"
-msgstr "密码已修改"
+msgid "Password successfully changed!"
+msgstr "密码修改成功！"
msgid "Path to CA-Certificate"
msgstr "CA证书路径"
+msgid "Path to Client-Certificate"
+msgstr ""
+
msgid "Path to Private Key"
msgstr "私钥路径"
msgid "Peak:"
msgstr "峰值:"
-msgid "Perform Actions"
-msgstr "执行操作"
-
msgid "Perform reboot"
msgstr "执行重启"
+msgid "Perform reset"
+msgstr "执行复位"
+
+msgid "Phy Rate:"
+msgstr "物理速率:"
+
msgid "Physical Settings"
msgstr "物理设置"
msgid "Pkts."
-msgstr "æ\8a¥æ\96\87æ\95°"
+msgstr "æ\95°æ\8d®å\8c\85"
msgid "Please enter your username and password."
msgstr "请输入用户名和密码。"
msgid "Please wait: Device rebooting..."
msgstr "设备重启中..."
-msgid "Plugin path"
-msgstr "插件路径"
-
msgid "Policy"
msgstr "策略"
msgid "Port"
msgstr "端口"
-msgid "Ports"
-msgstr "端口"
-
msgid "Port %d"
msgstr "端口 %d"
msgid "Port %d is untagged in multiple VLANs!"
-msgstr "端口 %d 同时存在与多个VLAN中！"
-
-msgid "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default VLAN ID added to received untagged frames."
-msgstr "端口的<abbr title=\"Primary VLAN IDs\">PVIDs</abbr>指定了添加所接收的未标记桢的默认VLAN号。"
-
-msgid "Port PVIDs on %q"
-msgstr "端口的PVIDs在 %q"
-
-msgid "Post-commit actions"
-msgstr "Post-commit 操作"
+msgstr "端口 %d 在多个VLAN中均未标记！"
msgid "Power"
msgstr "Power"
-msgid "prevents caching of negative <abbr title=\"Domain Name System\">DNS</abbr>-replies"
-msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>应答"
-
-msgid "Prevents client to client communication"
-msgstr "禁止客户端间的通信"
+msgid ""
+"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
+"ignore failures"
+msgstr "在指定数量的LCP响应故障后假定链路已断开，值0为忽略响应故障"
msgid "Prevents client-to-client communication"
msgstr "禁止客户端间的通信"
-msgid "Primary"
-msgstr "主要的"
-
msgid "Proceed"
msgstr "执行"
-msgid "Proceed reverting all settings and resetting to firmware defaults?"
-msgstr "放弃所有配置并将路由恢复出厂设置？"
-
msgid "Processes"
msgstr "进程"
-msgid "Processor"
-msgstr "处理器"
-
-msgid "Project Homepage"
-msgstr "项目主页"
-
msgid "Prot."
msgstr "协议"
msgid "Protocol"
msgstr "协议"
-msgid "Provide (Access Point)"
-msgstr "添加(接入点)"
+msgid "Protocol family"
+msgstr "协议族"
+
+msgid "Protocol of the new interface"
+msgstr "新接口的协议"
+
+msgid "Protocol support is not installed"
+msgstr "未安装协议支持"
msgid "Provide new network"
msgstr "添加新网络"
-msgid "Pseudo Ad-Hoc"
-msgstr "伪装 Ad-Hoc"
-
msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "伪装 Ad-Hoc (ahdemo)"
+msgstr "伪装Ad-Hoc(ahdemo)"
msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS 阈值"
+msgstr "RTS/CTS阈值"
msgid "RX"
msgstr "接收"
-msgid "Radius-Port"
-msgstr "Radius-端口"
+msgid "Radius-Accounting-Port"
+msgstr "Radius-Accounting-Port"
+
+msgid "Radius-Accounting-Secret"
+msgstr "Radius-Accounting-Secret"
-msgid "Radius-Server"
-msgstr "Radius-服务器"
+msgid "Radius-Accounting-Server"
+msgstr "Radius-Accounting-Server"
-msgid "Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-Server"
-msgstr "根据<code>/etc/ethers</code>来配置<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>服务器"
+msgid "Radius-Authentication-Port"
+msgstr "Radius-Authentication-Port"
+
+msgid "Radius-Authentication-Secret"
+msgstr "Radius-Authentication-Secret"
+
+msgid "Radius-Authentication-Server"
+msgstr "Radius-Authentication-Server"
+
+msgid ""
+"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
+"Configuration Protocol\">DHCP</abbr>-Server"
+msgstr ""
+"根据<code>/etc/ethers</code>来配置<abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr>-服务器"
msgid ""
"Really delete this interface? The deletion cannot be undone!\n"
-"You might loose access to this router if you are connected via this interface."
-msgstr "真的要删除此接口？如果你使用此接口管理路由，你可能无法再管理你的路由器！"
+"You might lose access to this router if you are connected via this interface."
+msgstr ""
+"真的要删除此接口？删除操作无法撤销！\n"
+"如果正由此接口管理路由，可能导致无法再管理路由器！"
msgid ""
"Really delete this wireless network? The deletion cannot be undone!\n"
-"You might loose access to this router if you are connected via this network."
-msgstr "真的要删除此网络？如果你使用此网络管理路由，你可能无法再管理你的路由器！"
+"You might lose access to this router if you are connected via this network."
+msgstr ""
+"真的要删除此无线网络？删除操作无法撤销！\n"
+"如果正由此网络管理路由，可能导致无法再管理路由器！"
+
+msgid "Really reset all changes?"
+msgstr "确定要放弃所有更改？"
msgid ""
"Really shutdown interface \"%s\" ?\n"
-"You might loose access to this router if you are connected via this interface."
-msgstr "真的要关闭此接口？如果你使用此接口管理路由，你可能无法再管理你的路由器！"
+"You might lose access to this router if you are connected via this interface."
+msgstr ""
+"真的要关闭\"%s\" 接口？\n"
+"如果正由此接口管理路由，可能导致无法再管理路由器！"
+
+msgid ""
+"Really shutdown network ?\n"
+"You might lose access to this router if you are connected via this interface."
+msgstr ""
+"真的要关闭此网络？\n"
+"如果正由此网络管理路由，可能导致无法再管理路由器！"
+
+msgid "Really switch protocol?"
+msgstr "确定要切换协议？"
msgid "Realtime Connections"
msgstr "实时连接"
+msgid "Realtime Graphs"
+msgstr "实时绘图"
+
msgid "Realtime Load"
msgstr "实时负载"
msgid "Realtime Traffic"
msgstr "实时流量"
+msgid "Realtime Wireless"
+msgstr "实时无线"
+
msgid "Rebind protection"
msgstr "重绑定保护"
msgid "Reboot"
msgstr "重启"
+msgid "Rebooting..."
+msgstr "重启中..."
+
msgid "Reboots the operating system of your device"
-msgstr "重启设备"
+msgstr "重启设备的系统"
msgid "Receive"
msgstr "接收"
msgstr "重连此接口"
msgid "Reconnecting interface"
-msgstr "重连接口"
+msgstr "重连接口中..."
msgid "References"
-msgstr "å\8f\82è\80\83"
+msgstr "å¼\95ç\94¨"
msgid "Regulatory Domain"
msgstr "约束域"
+msgid "Relay"
+msgstr "中继"
+
+msgid "Relay Bridge"
+msgstr "中继桥"
+
+msgid "Relay between networks"
+msgstr "网络间中继"
+
+msgid "Relay bridge"
+msgstr "中继桥"
+
+msgid "Remote IPv4 address"
+msgstr "远程IPv4地址"
+
msgid "Remove"
msgstr "移除"
msgid "Repeat scan"
-msgstr "重复扫描"
-
-msgid "Replace default route"
-msgstr "重置默认路由"
+msgstr "重新扫描"
msgid "Replace entry"
msgstr "重置条目"
msgid "Replace wireless configuration"
msgstr "重置无线配置"
+msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
+msgstr "某些ISP需要，例如:同轴线网络DOCSIS 3"
+
msgid "Reset"
msgstr "复位"
msgid "Reset Counters"
msgstr "复位计数器"
-msgid "Reset router to defaults"
-msgstr "恢复出厂设置"
-
-msgid "Reset switch during setup"
-msgstr "设置时复位交换机"
+msgid "Reset to defaults"
+msgstr "复位系统"
msgid "Resolv and Hosts Files"
-msgstr "Resolv和Hosts文件"
+msgstr "主机和解析文件"
msgid "Resolve file"
msgstr "解析文件"
+msgid "Restart"
+msgstr "重启"
+
msgid "Restart Firewall"
msgstr "重启防火墙"
msgid "Root directory for files served via TFTP"
msgstr "TFTP服务器的根目录"
-msgid "Routes"
-msgstr "路由"
+msgid "Router Model"
+msgstr "路由型号"
msgid "Router Name"
msgstr "系统名称"
-msgid "Router Model"
-msgstr "路由型号"
+msgid "Router Password"
+msgstr "路由密码"
+
+msgid "Routes"
+msgstr "路由"
-msgid "Routes specify over which interface and gateway a certain host or network can be reached."
+msgid ""
+"Routes specify over which interface and gateway a certain host or network "
+"can be reached."
msgstr "路由表描述了数据包的可达路径。"
msgid "Rule #"
-msgstr "规则 #"
+msgstr "规则#"
msgid "Run a filesystem check before mounting the device"
msgstr "挂载设备前运行文件系统检查"
msgid "Run filesystem check"
msgstr "运行文件系统检查"
+msgid "SSH Access"
+msgstr "SSH访问"
+
+msgid "SSH-Keys"
+msgstr "SSH-密钥"
+
msgid "SSID"
msgstr "SSID"
-msgid "STP"
-msgstr "STP"
-
msgid "Save"
msgstr "保存"
msgid "Scheduled Tasks"
msgstr "计划任务"
-msgid "Search file..."
-msgstr "查找文件..."
-
-msgid "Seconds to wait for the modem to become ready before attempting to connect"
-msgstr "Modem尝试连接的就绪准备时间"
-
msgid "Section added"
-msgstr "已添加区域"
+msgstr "添加的区域"
msgid "Section removed"
-msgstr "已移除区域"
+msgstr "移除的区域"
msgid "See \"mount\" manpage for details"
-msgstr "详细参见\"mount\"联机帮助"
+msgstr "详参\"mount\"联机帮助"
+
+msgid ""
+"Send LCP echo requests at the given interval in seconds, only effective in "
+"conjunction with failure threshold"
+msgstr "在指定的时间间隔发送LCP响应(秒)，仅在结合了故障阈值时有效"
+
+msgid "Send router solicitations"
+msgstr "发送路由请求"
msgid "Separate Clients"
msgstr "隔离客户端"
msgid "Separate WDS"
-msgstr "隔离 WDS"
+msgstr "隔离WDS"
-msgid "Server"
-msgstr "服务器"
+msgid "Server Settings"
+msgstr "服务器设置"
-msgid "Server IPv4-Address"
-msgstr "IPv4-地址服务器"
+msgid "Service Name"
+msgstr "服务名"
-msgid "Service type"
+msgid "Service Type"
msgstr "服务类型"
msgid "Services"
msgstr "服务"
-msgid "Services and daemons perform certain tasks on your device."
-msgstr "路由器上运行的部分任务和服务。"
+msgid "Setup DHCP Server"
+msgstr "配置DHCP服务器"
-msgid "Settings"
-msgstr "设置"
+msgid "Setup Time Synchronization"
+msgstr ""
-msgid "Setup wait time"
-msgstr "设置缓冲时间"
+msgid "Show current backup file list"
+msgstr "显示当前备份文件列表"
msgid "Shutdown this interface"
msgstr "关闭此接口"
+msgid "Shutdown this network"
+msgstr "关闭此网络"
+
msgid "Signal"
msgstr "信号"
+msgid "Signal:"
+msgstr "信号:"
+
msgid "Size"
msgstr "大小"
msgid "Skip"
-msgstr "忽略"
+msgstr "跳过"
msgid "Skip to content"
msgstr "跳到内容"
msgid "Some fields are invalid, cannot save values!"
msgstr "某些项的键值无效，无法保存！"
-msgid "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> You need to manually flash your device."
-msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
+msgid ""
+"Sorry, there is no sysupgrade support present, a new firmware image must be "
+"flashed manually. Please refer to the OpenWrt wiki for device specific "
+"install instructions."
+msgstr ""
+"抱歉，当前系统不支持sysupgrade升级，需手动刷新固件。请参考OpenWrt wiki页面的"
+"特定设备安装向导。"
msgid "Sort"
msgstr "排序"
msgid "Source"
msgstr "源地址"
+msgid "Specifies the advertised preferred prefix lifetime in seconds"
+msgstr "指定通告的首选前缀生存时间(秒)"
+
+msgid "Specifies the advertised valid prefix lifetime in seconds"
+msgstr "指定通告的有效前缀生存时间(秒)"
+
msgid "Specifies the button state to handle"
-msgstr "指定按钮的行为"
+msgstr "指定要处理的按键状态"
msgid "Specifies the directory the device is attached to"
-msgstr "指定设备的连接目录"
+msgstr "指定设备的挂载目录"
-msgid "Specify additional command line arguments for pppd here"
-msgstr "指定其他命令行参数到pppd"
+msgid "Specifies the listening port of this <em>Dropbear</em> instance"
+msgstr "指定此<em>Dropbear</em>实例的监听端口"
+
+msgid ""
+"Specifies the maximum amount of failed ARP requests until hosts are presumed "
+"to be dead"
+msgstr "指定假设主机已丢失的最大失败ARP请求数"
+
+msgid ""
+"Specifies the maximum amount of seconds after which hosts are presumed to be "
+"dead"
+msgstr "指定假设主机已丢失的最大时间(秒)"
msgid "Specify the secret encryption key here."
-msgstr "指定安全加密"
+msgstr "指定安全加密。"
msgid "Start"
-msgstr "起始"
+msgstr "开始"
+
+msgid "Start priority"
+msgstr "启动优先级"
+
+msgid "Startup"
+msgstr "启动项"
msgid "Static IPv4 Routes"
msgstr "静态IPv4路由"
msgstr "静态路由"
msgid "Static WDS"
-msgstr "静态 WDS"
+msgstr "静态WDS"
-msgid "Static leases are used to assign fixed IP addresses and symbolic hostnames to DHCP clients. They are also required for non-dynamic interface configurations where only hosts with a corresponding lease are served."
-msgstr "静态租约被用于分配给DHCP客户端以固定的IP地址和主机标识。并且要求接口为非动态配置，只有合法主机才能连接。"
+msgid "Static address"
+msgstr "静态地址"
+
+msgid ""
+"Static leases are used to assign fixed IP addresses and symbolic hostnames "
+"to DHCP clients. They are also required for non-dynamic interface "
+"configurations where only hosts with a corresponding lease are served."
+msgstr ""
+"静态租约用于给DHCP客户端分配固定的IP地址和主机标识。只有合法主机才能连接，并"
+"且接口须为非动态配置。"
msgid "Status"
msgstr "状态"
+msgid "Stop"
+msgstr "关闭"
+
msgid "Strict order"
msgstr "严谨查序"
msgid "Switch %q"
msgstr "交换机 %q"
+msgid "Switch %q (%s)"
+msgstr "交换机%q (%s)"
+
+msgid "Switch protocol"
+msgstr "切换协议"
+
+msgid "Sync with browser"
+msgstr "同步浏览器时间"
+
+msgid "Synchronizing..."
+msgstr "同步中..."
+
msgid "System"
msgstr "系统"
msgid "TFTP server root"
msgstr "TFTP服务器根"
-msgid "TTL"
-msgstr "TTL"
-
msgid "TX"
msgstr "发送"
-msgid "TX / RX"
-msgstr "发送 / 接收"
-
msgid "Table"
-msgstr "列表"
+msgstr "表格"
msgid "Target"
msgstr "对象"
msgid "Terminate"
msgstr "终止"
-msgid "Thanks To"
-msgstr "感谢"
-
-msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
-
-msgid "The <em>Device Configuration</em> section covers physical settings of the radio hardware such as channel, transmit power or antenna selection which is shared among all defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings like encryption or operation mode are grouped in the <em>Interface Configuration</em>."
-msgstr "<em>设备配置</em>项会更新无线的物理硬件设置，比如信道，发射功率，或天线选择。"
-
-msgid "The <em>libiwinfo</em> package is not installed. You must install this component for working wireless configuration!"
-msgstr "<em>libiwinfo</em>软件包未安装，必需安装此组件以配置无线！"
+msgid ""
+"The <em>Device Configuration</em> section covers physical settings of the "
+"radio hardware such as channel, transmit power or antenna selection which is "
+"shared among all defined wireless networks (if the radio hardware is multi-"
+"SSID capable). Per network settings like encryption or operation mode are "
+"grouped in the <em>Interface Configuration</em>."
+msgstr ""
+"<em>设备配置</em>区域可配置无线的硬件参数，比如信道、发射功率或发射天线(如果"
+"此无线模块硬件支持多SSID，则全部SSID共用此设备配置)。<em>接口配置</em>区域则"
+"可配置此网络的工作模式和加密等。"
-msgid "The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> and <code>_</code>"
-msgstr "合法字符：<code>A-Z</code>, <code>a-z</code>, <code>0-9</code> 和 <code>_</code>"
+msgid ""
+"The <em>libiwinfo-lua</em> package is not installed. You must install this "
+"component for working wireless configuration!"
+msgstr "<em>libiwinfo-lua</em>软件包未安装。必需安装此组件以配置无线！"
-msgid "The device file of the memory or partition (<abbr title=\"for example\">e.g.</abbr> <code>/dev/sda1</code>)"
-msgstr "存储器或分区的设备文件 (<abbr title=\"for example\">例如</abbr> <code>/dev/sda1</code>)"
+msgid ""
+"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
+"code> and <code>_</code>"
+msgstr ""
+"合法字符：<code>A-Z</code>, <code>a-z</code>, <code>0-9</code> 和 <code>_</"
+"code>"
-msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-msgstr "modem的设备节点，例如/dev/ttyUSB0"
+msgid ""
+"The device file of the memory or partition (<abbr title=\"for example\">e.g."
+"</abbr> <code>/dev/sda1</code>)"
+msgstr ""
+"存储器或分区的设备文件，(<abbr title=\"for example\">例如</abbr> <code>/dev/"
+"sda1</code>)"
-msgid "The filesystem that was used to format the memory (<abbr title=\"for example\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
-msgstr "用于格式化存储器的文件系统 (<abbr title=\"for example\">例如</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
+msgid ""
+"The filesystem that was used to format the memory (<abbr title=\"for example"
+"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
+"samp>)"
+msgstr ""
+"用于格式化存储器的文件系统，(<abbr title=\"for example\">例如</abbr> "
+"<samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
-msgid "The flash image was uploaded. Below is the checksum and file size listed, compare them with the original file to ensure data integrity.<br /> Click \"Proceed\" below to start the flash procedure."
-msgstr "固件已上传，请注意核对文件大小和校验值！<br /> 点击 \"执行\" 开始刷写固件，刷新过程请勿断电！"
+msgid ""
+"The flash image was uploaded. Below is the checksum and file size listed, "
+"compare them with the original file to ensure data integrity.<br /> Click "
+"\"Proceed\" below to start the flash procedure."
+msgstr ""
+"固件已上传，请注意核对文件大小和校验值！<br />点击 \"执行\" 开始刷新固件，刷"
+"新过程切勿断电！"
-msgid "The following changes have been comitted"
+msgid "The following changes have been committed"
msgstr "以下更改已提交"
-msgid "The following changes have been applied"
-msgstr "以下更改已生效"
-
msgid "The following changes have been reverted"
msgstr "以下更改已放弃"
-msgid "The following files are detected by the system and will be kept automatically during sysupgrade"
-msgstr "更新固件时要保存的文件"
-
msgid "The following rules are currently active on this system."
msgstr "下面是系统中的活跃连接。"
-msgid "The hardware is not multi-SSID capable and existing configuration will be replaced if you proceed."
-msgstr "本机的硬件不支持多SSID，继续进行将会替换现有配置。"
+msgid "The given network name is not unique"
+msgstr "给定的网络名重复"
+
+msgid ""
+"The hardware is not multi-SSID capable and existing configuration will be "
+"replaced if you proceed."
+msgstr "本机的硬件不支持多SSID，继续进行将会重置现有配置。"
+
+msgid ""
+"The network ports on your router can be combined to several <abbr title="
+"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
+"communicate directly with each other. <abbr title=\"Virtual Local Area "
+"Network\">VLAN</abbr>s are often used to separate different network "
+"segments. Often there is by default one Uplink port for a connection to the "
+"next greater network like the internet and other ports for a local network."
+msgstr ""
+"本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，"
+"并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area Network\">VLAN</"
+"abbr>也常用于分割不同网段。默认通常是一条上行端口连接ISP，其余端口为本地子"
+"网。"
-msgid "The network ports on your router can be combined to several <abbr title=\"Virtual Local Area Network\">VLAN</abbr>s in which computers can communicate directly with each other. <abbr title=\"Virtual Local Area Network\">VLAN</abbr>s are often used to separate different network segments. Often there is by default one Uplink port for a connection to the next greater network like the internet and other ports for a local network."
-msgstr "该设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network\">VLAN</abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端口为本地子网。"
+msgid "The selected protocol needs a device assigned"
+msgstr "所选的协议需要分配设备"
-msgid "The realm which will be displayed at the authentication prompt for protected pages."
-msgstr "在有提示验证保护的网页时显示验证范围。"
+msgid ""
+"The system is erasing the configuration partition now and will reboot itself "
+"when finished."
+msgstr "系统正在删除配置分区，完成后会自动重启。"
-msgid "The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes until you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."
-msgstr "正在刷新系统...<br /> 切勿关闭电源!<br /> 稍等数分钟即可重新连接到路由，可能需要更改计算机的IP地址以重新连接。"
+msgid ""
+"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
+"few minutes until you try to reconnect. It might be necessary to renew the "
+"address of your computer to reach the device again, depending on your "
+"settings."
+msgstr ""
+"正在刷新系统...<br />DO NOT POWER OFF THE DEVICE! 切勿关闭电源!<br />稍等数分"
+"钟即可重新连接到路由。可能需要更改计算机的IP地址以重新连接。"
-msgid "The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform."
-msgstr "不支持所上传的文件格式，请确认选择文件无误！"
+msgid ""
+"The uploaded image file does not contain a supported format. Make sure that "
+"you choose the generic image format for your platform."
+msgstr "不支持所上传的文件格式。请确认选择文件无误。"
msgid "There are no active leases."
-msgstr "没有活动的客户端！"
+msgstr "没有活动的客户端。"
msgid "There are no pending changes to apply!"
-msgstr "没有等待生效的更改！"
+msgstr "没有待生效的更改！"
msgid "There are no pending changes to revert!"
-msgstr "没有更改可放弃！"
+msgstr "没有可放弃的更改！"
msgid "There are no pending changes!"
msgstr "没有任何更改！"
-msgid "There is no password set on this router. Please configure a root password to protect the web interface and enable SSH."
-msgstr "尚未设置密码，请为root用户设置一个密码以保护路由器和开启SSH。"
+msgid ""
+"There is no device assigned yet, please attach a network device in the "
+"\"Physical Settings\" tab"
+msgstr "尚未分配设备，请在\"物理设置\"区域连接网络设备"
+
+msgid ""
+"There is no password set on this router. Please configure a root password to "
+"protect the web interface and enable SSH."
+msgstr "尚未设置密码。请为root用户设置密码以保护路由器和开启SSH。"
+
+msgid ""
+"This is a list of shell glob patterns for matching files and directories to "
+"include during sysupgrade. Modified files in /etc/config/ and certain other "
+"configurations are automatically preserved."
+msgstr ""
+"系统升级时要保存的配置文件和目录的清单表。目录/etc/config/内修改过的文件以及"
+"部分其他配置会被自动保存。"
-msgid "These commands will be executed automatically when a given <abbr title=\"Unified Configuration Interface\">UCI</abbr> configuration is committed allowing changes to be applied instantly."
-msgstr "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效后，这些命令将被自动执行。"
+msgid "This is the 32 byte hex encoded user ID, not the login name"
+msgstr "这是32 byte hex编码的用户ID，不是登录名"
-msgid "This is a list of shell glob patterns for matching files and directories to include during sysupgrade"
-msgstr "系统升级时要保存的配置文件以及目录的串列清单"
+msgid ""
+"This is the content of /etc/rc.local. Insert your own commands here (in "
+"front of 'exit 0') to execute them at the end of the boot process."
+msgstr ""
+"此处显示了 /etc/rc.local 的内容。将自定义的命令插入到('exit 0')之前，即可在系"
+"统启动完成时自动运行。"
-msgid "This is the administration area of <abbr title=\"Lua Configuration Interface\">LuCI</abbr>."
-msgstr "这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
+msgid ""
+"This is the local endpoint address assigned by the tunnel broker, it usually "
+"ends with <code>:2</code>"
+msgstr "这是隧道代理分配的本地终端地址，通常以<code>:2</code>结尾"
-msgid "This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> in the local network"
-msgstr "这是内网中唯一的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>服务器"
+msgid ""
+"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr> in the local network"
+msgstr ""
+"这是内网中唯一的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>服务器"
msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "这里可以指定系统crontab中的计划任务。"
+msgstr "这里可以自定义系统crontab中的计划任务。"
-msgid "This list gives an overview over currently running system processes and their status."
+msgid ""
+"This is usually the address of the nearest PoP operated by the tunnel broker"
+msgstr "这通常是隧道代理所管理的最近于PoP的地址"
+
+msgid ""
+"This list gives an overview over currently running system processes and "
+"their status."
msgstr "这里显示了当前系统中正在运行的进程和其状态信息。"
msgid "This page allows the configuration of custom button actions"
-msgstr "本页可自定义按键行为。"
+msgstr "本页可自定义按键动作。"
msgid "This page gives an overview over currently active network connections."
msgstr "本页显示了活跃的网络连接概况。"
msgid "This section contains no values yet"
msgstr "本区域尚无任何配置"
-msgid "Time (in seconds) after which an unused connection will be closed"
-msgstr "自动断线空闲时间(s)"
+msgid "Time Synchronization"
+msgstr "时间同步"
-msgid "Time Server (rdate)"
-msgstr "校时服务器(rdate)"
+msgid "Time Synchronization is not configured yet."
+msgstr ""
msgid "Timezone"
msgstr "时区"
+msgid ""
+"To restore configuration files, you can upload a previously generated backup "
+"archive here."
+msgstr "在此处上传之前生成的备份存档，即可恢复配置。"
+
msgid "Total Available"
msgstr "总共可用"
msgid "Transmitter Antenna"
msgstr "发射天线"
-msgid "transmitted / received"
-msgstr "已传输 / 已接收"
-
msgid "Trigger"
msgstr "触发"
msgid "Trigger Mode"
msgstr "触发模式"
-msgid "Tunnel Settings"
-msgstr "信道设置"
+msgid "Tunnel ID"
+msgstr "隧道ID"
+
+msgid "Tunnel Interface"
+msgstr "隧道接口"
msgid "Turbo Mode"
-msgstr "Turbo 模式"
+msgstr "Turbo模式"
msgid "Tx-Power"
msgstr "传输功率"
msgid "UDP:"
msgstr "UDP:"
+msgid "UMTS/GPRS/EV-DO"
+msgstr "UMTS/GPRS/EV-DO"
+
+msgid "USB Device"
+msgstr "USB设备"
+
msgid "UUID"
msgstr "UUID"
-msgid "Unknown Error"
-msgstr "未知错误"
+msgid "Unknown"
+msgstr "未知"
+
+msgid "Unknown Error, password not changed!"
+msgstr "未知错误，密码未更改！"
+
+msgid "Unmanaged"
+msgstr "Unmanaged"
msgid "Unsaved Changes"
msgstr "未保存的配置"
-msgid "Update package lists"
-msgstr "更新软件列表"
+msgid "Unsupported protocol type."
+msgstr "不支持的协议类型"
-msgid "Upgrade installed packages"
-msgstr "å\8d\87级已å®\89è£\85软件"
+msgid "Update lists"
+msgstr "å\88·æ\96°å\88\97表"
-msgid "Upload an OpenWrt image file to reflash the device."
-msgstr "上传OpenWrt固件以刷新设备"
+msgid ""
+"Upload a sysupgrade-compatible image here to replace the running firmware. "
+"Check \"Keep settings\" to retain the current configuration (requires an "
+"OpenWrt compatible firmware image)."
+msgstr ""
+"上传兼容的sysupgrade固件到此处以刷新当前系统。选中\"保留配置\"可保留当前的系"
+"统配置(需是OpenWrt兼容固件)。"
-msgid "Upload image"
-msgstr "ä¸\8aä¼ å\9bºä»¶"
+msgid "Upload archive..."
+msgstr "ä¸\8aä¼ å¤\87份..."
msgid "Uploaded File"
msgstr "上传的文件"
msgid "Use <code>/etc/ethers</code>"
msgstr "使用<code>/etc/ethers</code>"
+msgid "Use DHCP gateway"
+msgstr "使用DHCP网关"
+
+msgid "Use DNS servers advertised by peer"
+msgstr "使用端局通告的DNS服务器"
+
msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "使用ISO/IEC 3166 alpha2国家代码"
+msgstr "使用ISO/IEC 3166 alpha2国家代码。"
+
+msgid "Use MTU on tunnel interface"
+msgstr "在隧道接口使用MTU"
+
+msgid "Use TTL on tunnel interface"
+msgstr "在隧道接口使用TTL"
msgid "Use as root filesystem"
-msgstr "作为根文件系统"
+msgstr "挂载到根文件系统"
+
+msgid "Use broadcast flag"
+msgstr "使用广播标签"
+
+msgid "Use custom DNS servers"
+msgstr "使用自定义的DNS服务器"
+
+msgid "Use default gateway"
+msgstr "使用默认网关"
-msgid "Use peer DNS"
-msgstr "使用对等DNS"
+msgid "Use gateway metric"
+msgstr "使用网关跃点"
-msgid "Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed address to use and the <em>Hostname</em> is assigned as symbolic name to the requesting host."
-msgstr "使用<em>添加</em>按键来增加新的租约条目。"
+msgid "Use preferred lifetime"
+msgstr "使用首选生存时间"
+
+msgid "Use routing table"
+msgstr "使用路由表"
+
+msgid ""
+"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
+"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
+"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
+"requesting host."
+msgstr ""
+"使用<em>添加</em>按键来增加新的租约条目。<em>MAC-地址</em>鉴别主机，<em>IPv4-"
+"地址</em>分配地址，<em>主机名</em>分配标识。"
+
+msgid "Use valid lifetime"
+msgstr "使用有效生存时间"
msgid "Used"
-msgstr "已使用"
+msgstr "已用"
msgid "Used Key Slot"
-msgstr "已使ç\94¨ç\9a\84é\94®æ§½"
+msgstr "å\90¯ç\94¨å¯\86ç \81ç»\84"
msgid "Username"
msgstr "用户名"
msgid "VC-Mux"
msgstr "VC-Mux"
-msgid "VLAN"
-msgstr "VLAN"
-
-msgid "VLAN %d"
-msgstr "VLAN %d"
+msgid "VLAN Interface"
+msgstr "VLAN 接口"
msgid "VLANs on %q"
-msgstr "VLANs on %q"
+msgstr "划分%q的VLAN"
+
+msgid "VLANs on %q (%s)"
+msgstr "VLANs on %q (%s)"
+
+msgid "VPN Server"
+msgstr "VPN服务器"
+
+msgid "Vendor Class to send when requesting DHCP"
+msgstr "请求DHCP时发送的Vendor Class"
+
+msgid "Verify"
+msgstr "验证"
msgid "Version"
msgstr "版本"
msgstr "WDS"
msgid "WEP Open System"
-msgstr "WEP 开放认证"
+msgstr "WEP开放认证"
msgid "WEP Shared Key"
-msgstr "WEP 共享密钥"
+msgstr "WEP共享密钥"
msgid "WEP passphrase"
-msgstr "WEP 密钥"
+msgstr "WEP密钥"
msgid "WMM Mode"
-msgstr "WMM 模式"
+msgstr "WMM模式"
msgid "WPA passphrase"
-msgstr "WPA 密钥"
+msgstr "WPA密钥"
-msgid "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP and ad-hoc mode) to be installed."
-msgstr "WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点、点对点模式)。"
+msgid ""
+"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
+"and ad-hoc mode) to be installed."
+msgstr ""
+"WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点AP、点对点ad-hoc"
+"模式)。"
msgid "Waiting for router..."
msgstr "等待路由器..."
msgid "Warning: There are unsaved changes that will be lost while rebooting!"
msgstr "警告: 有尚未保存的更改，重启后将丢失!"
-msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-msgid "When flashing a new firmware with <abbr title=\"Lua Configuration Interface\">LuCI</abbr> these files will be added to the new firmware installation."
-msgstr "当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件时，这些文件将被加入到新的固件中。"
-
msgid "Wifi"
msgstr "无线"
msgid "Wifi networks in your local environment"
msgstr "本地无线热点"
-msgid "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> network members can automatically receive their network settings (<abbr title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title=\"Domain Name System\">DNS</abbr>-server, ...)."
-msgstr "用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>自动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网掩码，<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信息。"
-
msgid "Wireless"
msgstr "无线"
msgid "Wireless Overview"
msgstr "无线概况"
-msgid "Wireless Scan"
-msgstr "搜索无线"
-
msgid "Wireless Security"
msgstr "无线安全"
msgid "Wireless is disabled or not associated"
-msgstr "æ\9cªå¼\80å\90¯æ\97 线æ\88\96æ\9cªå\85³è\81\94æ\97 线"
+msgstr "未开启或未关联无线"
-msgid "Write received DNS requests to syslog"
-msgstr "将DNS请求写入系统日志"
+msgid "Wireless is restarting..."
+msgstr "重启无线中..."
-msgid "XR Support"
-msgstr "XR 支持"
-
-msgid "You can specify multiple DNS servers here, press enter to add a new entry. Servers entered here will override automatically assigned ones."
-msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
+msgid "Wireless network is disabled"
+msgstr "无线已禁用"
-msgid "You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
+msgid "Wireless network is enabled"
+msgstr "无线已启用"
-msgid "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, \"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-msgstr "需要安装\"comgt\" 以支持 UMTS/GPRS, \"ppp-mod-pppoe\" 以支持 PPPoE, \"ppp-mod-pppoa\" 以支持 PPPoA \"pptp\" 以支持 PPtP。"
+msgid "Wireless restarted"
+msgstr "无线已重启"
-msgid "You are about to join the wireless network <em><strong>%s</strong></em>. In order to complete the process, you need to provide some additional details."
-msgstr "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
+msgid "Wireless shut down"
+msgstr "无线已关闭"
-msgid "You can run several wifi networks with one device. Be aware that there are certain hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network simultaneously."
-msgstr "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常可以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线网络。"
+msgid "Write received DNS requests to syslog"
+msgstr "将DNS请求写入系统日志"
-msgid "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP support"
-msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
+msgid "XR Support"
+msgstr "XR支持"
-msgid "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
+msgid ""
+"You can enable or disable installed init scripts here. Changes will applied "
+"after a device reboot.<br /><strong>Warning: If you disable essential init "
+"scripts like \"network\", your device might become inaccesable!</strong>"
+msgstr ""
+"此处可以启用或禁用已安装的启动脚本。更改在设备重启后生效。<br /><strong>警"
+"告：如果禁用了必要的启动脚本，比如\"network\"，可能会导致设备无法访问！</"
+"strong>"
-msgid "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> to use WPA!"
-msgstr "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
+msgid ""
+"You must enable Java Script in your browser or LuCI will not work properly."
+msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
msgid "any"
msgstr "任意"
msgid "auto"
msgstr "自动"
-msgid "back"
-msgstr "后退"
-
msgid "bridged"
msgstr "已桥接"
-msgid "buffered"
-msgstr "已缓冲"
-
-msgid "Buffered"
-msgstr "已缓冲"
-
-msgid "cached"
-msgstr "已缓存"
-
-msgid "Cached"
-msgstr "已缓存"
-
msgid "creates a bridge over specified interface(s)"
-msgstr "在指定接口创建桥接(s)"
-
-msgid "defaults to <code>/etc/httpd.conf</code>"
-msgstr "默认为<code>/etc/httpd.conf</code>"
+msgstr "为指定接口创建桥接"
msgid "disable"
msgstr "禁用"
msgid "expired"
msgstr "已过期"
-msgid "file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-leases will be stored"
-msgstr "存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
-
-msgid "free"
-msgstr "空闲"
+msgid ""
+"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>-leases will be stored"
+msgstr ""
+"存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
-msgid "Free"
-msgstr "空闲"
+msgid "forward"
+msgstr ""
msgid "help"
msgstr "帮助"
msgid "if target is a network"
msgstr "如果对象是一个网络"
+msgid "input"
+msgstr ""
+
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr>解析文件"
msgid "no"
-msgstr "否"
+msgstr "no"
msgid "none"
msgstr "无"
msgid "off"
msgstr "关闭"
+msgid "on"
+msgstr "on"
+
msgid "routed"
msgstr "路由守护"
-msgid "static"
-msgstr "静态IP"
-
msgid "tagged"
-msgstr "标签"
+msgstr "已标记"
msgid "unlimited"
msgstr "无限制"
msgstr "未指定"
msgid "unspecified -or- create:"
-msgstr "未指定或创建:"
+msgstr "未指定 // 创建:"
msgid "untagged"
-msgstr "æ\97 æ \87ç¾"
+msgstr "æ\9cªæ \87è®°"
msgid "yes"
-msgstr "是"
+msgstr "yes"
msgid "« Back"
msgstr "« 后退"
+#~ msgid "Custom Files"
+#~ msgstr "自定义文件"
-msgid "User Interface"
-msgstr "用户界面"
+#~ msgid "Custom files"
+#~ msgstr "自定义文件"
-msgid "(hidden)"
-msgstr "(隐藏)"
+#~ msgid "Detected Files"
+#~ msgstr "查询到的文件"
-msgid "(optional)"
-msgstr "(任意)"
+#~ msgid "Detected files"
+#~ msgstr "查询到的文件"
-msgid "Aliases"
-msgstr "别名"
+#~ msgid "Files to be kept when flashing a new firmware"
+#~ msgstr "更新固件时被保存的文件"
-msgid "First leased address"
-msgstr "起始分配地址"
+#~ msgid "General"
+#~ msgstr "基本信息"
-msgid "Local Network"
-msgstr "本地网络"
+#~ msgid ""
+#~ "Here you can customize the settings and the functionality of <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
+#~ "件和功能。"
-msgid "Number of leased addresses"
-msgstr "地址租约数"
+#~ msgid "Post-commit actions"
+#~ msgstr "Post-commit操作"
-msgid "Path"
-msgstr "路径"
+#~ msgid ""
+#~ "The following files are detected by the system and will be kept "
+#~ "automatically during sysupgrade"
+#~ msgstr "更新固件时要保存的文件"
-msgid "Resolvfile"
-msgstr "解析文件"
+#~ msgid ""
+#~ "These commands will be executed automatically when a given <abbr title="
+#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
+#~ "allowing changes to be applied instantly."
+#~ msgstr ""
+#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
+#~ "后，这些命令将被自动执行。"
-msgid "Zone"
-msgstr "区域"
+#~ msgid ""
+#~ "This is a list of shell glob patterns for matching files and directories "
+#~ "to include during sysupgrade"
+#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
-msgid "additional hostfile"
-msgstr "附加的主机文件"
+#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
+#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-msgid "automatic"
-msgstr "自动"
+#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
+#~ msgstr ""
+#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-msgid "automatically reconnect"
-msgstr "自动重连"
+#~ msgid "AHCP Settings"
+#~ msgstr "AHCP设置"
-msgid "concurrent queries"
-msgstr "并发查询"
+#~ msgid "ARP ping retries"
+#~ msgstr "重试ARP ping"
-msgid "disconnect when idle for"
-msgstr "空闲自动断开"
+#~ msgid "ATM Settings"
+#~ msgstr "ATM设置"
-msgid "don't cache unknown"
-msgstr "不缓存未知数据"
+#~ msgid "Accept Router Advertisements"
+#~ msgstr "接收路由公告"
-msgid "installed"
-msgstr "已安装"
+#~ msgid "Access point (APN)"
+#~ msgstr "接入点(APN)"
-msgid "manual"
-msgstr "手册"
+#~ msgid "Additional pppd options"
+#~ msgstr "附加pppd选项"
-msgid "not installed"
-msgstr "未安装"
+#~ msgid "Allowed range is 1 to FFFF"
+#~ msgstr "允许范围：1 ~ FFFF"
-msgid "query port"
-msgstr "查询端口"
+#~ msgid "Automatic Disconnect"
+#~ msgstr "自动断开"
-msgid "all"
-msgstr "全部"
+#~ msgid "Backup Archive"
+#~ msgstr "备份的存档"
-msgid "Code"
-msgstr "代码"
+#~ msgid ""
+#~ "Configure the local DNS server to use the name servers adverticed by the "
+#~ "PPP peer"
+#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
-msgid "Distance"
-msgstr "距离"
+#~ msgid "Connect script"
+#~ msgstr "连接脚本"
-msgid "Legend"
-msgstr "图例"
+#~ msgid "Create backup"
+#~ msgstr "创建备份"
-msgid "Library"
-msgstr "Library"
+#~ msgid "Default"
+#~ msgstr "默认"
-msgid "see '%s' manpage"
-msgstr "详参 '%s' 联机帮助"
+#~ msgid "Disconnect script"
+#~ msgstr "断开脚本"
-msgid "Package Manager"
-msgstr "软件包管理"
+#~ msgid "Edit package lists and installation targets"
+#~ msgstr "修改软件包的同步源和安装地址"
-msgid "Service"
-msgstr "服务"
+#~ msgid "Enable 4K VLANs"
+#~ msgstr "开启4K VLAN"
+
+#~ msgid "Enable IPv6 on PPP link"
+#~ msgstr "在PPP链路上启用IPv6"
+
+#~ msgid "Firmware image"
+#~ msgstr "固件文件"
+
+#~ msgid "Forward DHCP"
+#~ msgstr "转发DHCP"
+
+#~ msgid "Forward broadcasts"
+#~ msgstr "转发广播"
+
+#~ msgid "HE.net Tunnel ID"
+#~ msgstr "HE.net隧道ID"
+
+#~ msgid ""
+#~ "Here you can backup and restore your router configuration and - if "
+#~ "possible - reset the router to the default settings."
+#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
+
+#~ msgid "Installation targets"
+#~ msgstr "安装位置"
+
+#~ msgid "Keep configuration files"
+#~ msgstr "保留配置文件"
+
+#~ msgid "Keep-Alive"
+#~ msgstr "保持活动"
+
+#~ msgid "Kernel"
+#~ msgstr "内核"
+
+#~ msgid ""
+#~ "Let pppd replace the current default route to use the PPP interface after "
+#~ "successful connect"
+#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
+
+#~ msgid "Let pppd run this script after establishing the PPP link"
+#~ msgstr "PPP连接建立后运行此脚本"
+
+#~ msgid "Let pppd run this script before tearing down the PPP link"
+#~ msgstr "PPP连接断开前运行此脚本"
+
+#~ msgid ""
+#~ "Make sure that you provide the correct pin code here or you might lock "
+#~ "your sim card!"
+#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
+
+#~ msgid ""
+#~ "Most of them are network servers, that offer a certain service for your "
+#~ "device or network like shell access, serving webpages like <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
+#~ "e-mails, ..."
+#~ msgstr ""
+#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
+#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
+
+#~ msgid "Number of failed connection tests to initiate automatic reconnect"
+#~ msgstr "启动自动重连的失败连接次数"
+
+#~ msgid "Override Gateway"
+#~ msgstr "更新网关"
+
+#~ msgid "PIN code"
+#~ msgstr "PIN码"
+
+#~ msgid "PPP Settings"
+#~ msgstr "PPP设置"
+
+#~ msgid "Package lists"
+#~ msgstr "软件同步源"
+
+#~ msgid ""
+#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
+#~ "VLAN ID added to received untagged frames."
+#~ msgstr ""
+#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
+#~ "记桢的默认VLAN ID。"
+
+#~ msgid "Port PVIDs on %q"
+#~ msgstr "分配%q的端口PVID"
+
+#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
+#~ msgstr "放弃所有配置并将路由复位到默认状态？"
+
+#~ msgid "Processor"
+#~ msgstr "处理器"
+
+#~ msgid "Radius-Port"
+#~ msgstr "Radius-端口"
+
+#~ msgid "Radius-Server"
+#~ msgstr "Radius-服务器"
+
+#~ msgid ""
+#~ "Really shutdown network ?\n"
+#~ "You might loose access to this router if you are connected via this "
+#~ "interface."
+#~ msgstr ""
+#~ "真的要关闭此网络？\n"
+#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
+
+#~ msgid "Relay Settings"
+#~ msgstr "中继设置"
+
+#~ msgid "Replace default route"
+#~ msgstr "重置默认路由"
+
+#~ msgid "Reset router to defaults"
+#~ msgstr "恢复出厂设置"
+
+#~ msgid "Routing table ID"
+#~ msgstr "路由表ID"
+
+#~ msgid ""
+#~ "Seconds to wait for the modem to become ready before attempting to connect"
+#~ msgstr "Modem尝试连接的就绪准备时间"
+
+#~ msgid "Send Router Solicitiations"
+#~ msgstr "发送路由探测"
+
+#~ msgid "Server IPv4-Address"
+#~ msgstr "服务器IPv4-地址"
+
+#~ msgid "Service type"
+#~ msgstr "服务类型"
+
+#~ msgid "Services and daemons perform certain tasks on your device."
+#~ msgstr "路由器上运行的部分任务和服务。"
+
+#~ msgid "Settings"
+#~ msgstr "设置"
+
+#~ msgid "Setup wait time"
+#~ msgstr "设置缓冲时间"
+
+#~ msgid ""
+#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
+#~ "You need to manually flash your device."
+#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
+
+#~ msgid "Specify additional command line arguments for pppd here"
+#~ msgstr "指定附加命令行参数到pppd"
+
+#~ msgid "TTL"
+#~ msgstr "TTL"
+
+#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
+#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
+
+#~ msgid "Time (in seconds) after which an unused connection will be closed"
+#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
+
+#~ msgid "Time Server (rdate)"
+#~ msgstr "校时服务器(rdate)"
+
+#~ msgid "Tunnel Settings"
+#~ msgstr "隧道设置"
+
+#~ msgid "Update package lists"
+#~ msgstr "更新软件列表"
+
+#~ msgid "Upload an OpenWrt image file to reflash the device."
+#~ msgstr "上传OpenWrt固件以刷新设备。"
+
+#~ msgid "Upload image"
+#~ msgstr "上传固件"
+
+#~ msgid "Use peer DNS"
+#~ msgstr "使用对等DNS"
+
+#~ msgid "VLAN %d"
+#~ msgstr "VLAN %d"
+
+#~ msgid ""
+#~ "You can specify multiple DNS servers here, press enter to add a new "
+#~ "entry. Servers entered here will override automatically assigned ones."
+#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
+
+#~ msgid ""
+#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
+#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
+#~ msgstr ""
+#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
+#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
+
+#~ msgid "back"
+#~ msgstr "后退"
+
+#~ msgid "buffered"
+#~ msgstr "已缓冲"
+
+#~ msgid "cached"
+#~ msgstr "已缓存"
+
+#~ msgid "free"
+#~ msgstr "空闲"
+
+#~ msgid "static"
+#~ msgstr "静态IP"
+
+#~ msgid ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
+#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
+#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
+#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
+#~ "Apache-License."
+#~ msgstr ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使"
+#~ "用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration "
+#~ "Interface\">LuCI</abbr>遵循Apache-License."
+
+#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
+#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
+
+#~ msgid ""
+#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
+#~ "LuCI"
+#~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。"
+
+#~ msgid ""
+#~ "A small webserver which can be used to serve <abbr title=\"Lua "
+#~ "Configuration Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服"
+#~ "务器。"
+
+#~ msgid "About"
+#~ msgstr "关于"
+
+#~ msgid "Active IP Connections"
+#~ msgstr "活动IP连接"
+
+#~ msgid "Addresses"
+#~ msgstr "地址"
+
+#~ msgid "Admin Password"
+#~ msgstr "管理密码"
+
+#~ msgid "Alias"
+#~ msgstr "别名"
+
+#~ msgid "Authentication Realm"
+#~ msgstr "验证范围"
+
+#~ msgid "Bridge Port"
+#~ msgstr "桥接端口"
+
+#~ msgid ""
+#~ "Change the password of the system administrator (User <code>root</code>)"
+#~ msgstr "修改管理员密码"
+
+#~ msgid "Client + WDS"
+#~ msgstr "客户端+WDS"
+
+#~ msgid "Configuration file"
+#~ msgstr "配置文件"
+
+#~ msgid "Connection timeout"
+#~ msgstr "连接超时"
+
+#~ msgid "Contributing Developers"
+#~ msgstr "特别致谢"
+
+#~ msgid "DHCP assigned"
+#~ msgstr "DHCP有效分配"
+
+#~ msgid "Document root"
+#~ msgstr "根文档"
+
+#~ msgid "Enable Keep-Alive"
+#~ msgstr "开启保持活动"
+
+#~ msgid "Enable device"
+#~ msgstr "开启设备"
+
+#~ msgid "Ethernet Bridge"
+#~ msgstr "以太网桥"
+
+#~ msgid ""
+#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
+#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
+#~ "authentication."
+#~ msgstr ""
+#~ "这里可以粘贴公用<abbr title=\"Secure Shell\">SSH</abbr>密钥以用于<abbr "
+#~ "title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
+
+#~ msgid "ID"
+#~ msgstr "ID"
+
+#~ msgid "IP Configuration"
+#~ msgstr "IP设置"
+
+#~ msgid "Interface Status"
+#~ msgstr "接口状态"
+
+#~ msgid "KB"
+#~ msgstr "KB"
+
+#~ msgid "Lead Development"
+#~ msgstr "开发向导"
+
+#~ msgid "Master"
+#~ msgstr "Master"
+
+#~ msgid "Master + WDS"
+#~ msgstr "Master + WDS"
+
+#~ msgid "No address configured on this interface."
+#~ msgstr "本接口未设置地址"
+
+#~ msgid "Not configured"
+#~ msgstr "未设置"
+
+#~ msgid "Password successfully changed"
+#~ msgstr "密码已修改"
+
+#~ msgid "Plugin path"
+#~ msgstr "插件路径"
+
+#~ msgid "Ports"
+#~ msgstr "端口"
+
+#~ msgid "Primary"
+#~ msgstr "主要的"
+
+#~ msgid "Project Homepage"
+#~ msgstr "项目主页"
+
+#~ msgid "Pseudo Ad-Hoc"
+#~ msgstr "伪装Ad-Hoc"
+
+#~ msgid "STP"
+#~ msgstr "STP"
+
+#~ msgid "Thanks To"
+#~ msgstr "感谢"
+
+#~ msgid ""
+#~ "The realm which will be displayed at the authentication prompt for "
+#~ "protected pages."
+#~ msgstr "在有提示验证保护的网页时显示验证范围。"
+
+#~ msgid "Unknown Error"
+#~ msgstr "未知错误"
+
+#~ msgid "VLAN"
+#~ msgstr "VLAN"
+
+#~ msgid "defaults to <code>/etc/httpd.conf</code>"
+#~ msgstr "默认为<code>/etc/httpd.conf</code>"
+
+#~ msgid "Enable this switch"
+#~ msgstr "开启交换机"
+
+#~ msgid "OPKG error code %i"
+#~ msgstr "OPKG 出错代码 %i"
+
+#~ msgid "Package lists updated"
+#~ msgstr "更新软件包列表"
+
+#~ msgid "Reset switch during setup"
+#~ msgstr "设置时复位交换机"
+
+#~ msgid "Upgrade installed packages"
+#~ msgstr "升级已安装软件"
+
+#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
+#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
+
+#~ msgid ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
+#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
+#~ "Kamikaze."
+#~ msgstr ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活"
+#~ "的，可视化的用户界面，可用来配置OpenWrt。"
+
+#~ msgid "AP-Isolation"
+#~ msgstr "AP隔离"
+
+#~ msgid "Active IPv4-Routes"
+#~ msgstr "活动的IPv4链路"
+
+#~ msgid "adds domain names to hostentries in the resolv file"
+#~ msgstr "添加域名条目到主机解析文件"
+
+#~ msgid "Add the Wifi network to physical network"
+#~ msgstr "添加无线网络到物理网络"
+
+#~ msgid ""
+#~ "Also kernel or service logfiles can be viewed here to get an overview "
+#~ "over their current state."
+#~ msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
+
+#~ msgid "And now have fun with your router!"
+#~ msgstr "现在开始体验路由带来的乐趣吧!"
+
+#~ msgid ""
+#~ "As we always want to improve this interface we are looking forward to "
+#~ "your feedback and suggestions."
+#~ msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
+
+#~ msgid "Attach to existing network"
+#~ msgstr "连接现有网络"
+
+#~ msgid "Clamp Segment Size"
+#~ msgstr "固定段大小"
+
+#~ msgid "Configuration applied"
+#~ msgstr "设置已应用"
+
+#~ msgid "Create Or Attach Network"
+#~ msgstr "创建/连接 网络"
+
+#~ msgid "Devices"
+#~ msgstr "设备"
+
+#~ msgid "enable"
+#~ msgstr "启用"
+
+#~ msgid "Errors"
+#~ msgstr "错误"
+
+#~ msgid "Essentials"
+#~ msgstr "概要"
+
+#~ msgid ""
+#~ "Fixes problems with unreachable websites, submitting forms or other "
+#~ "unexpected behaviour for some ISPs."
+#~ msgstr "修复某些ISP的不可达网站或其他未知错误"
+
+#~ msgid ""
+#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
+#~ "Windows-systems"
+#~ msgstr ""
+#~ "过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
+
+#~ msgid "Hardware Address"
+#~ msgstr "硬件地址"
+
+#~ msgid "Hello!"
+#~ msgstr "Hello!"
+
+#~ msgid "Here you can configure installed wifi devices."
+#~ msgstr "这里可以配置已安装的无线设备。"
+
+#~ msgid ""
+#~ "Here you can find information about the current system status like <abbr "
+#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
+#~ "usage or network interface data."
+#~ msgstr ""
+#~ "这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit"
+#~ "\">CPU</abbr>频率、内存使用率或网络链接数据。"
+
+#~ msgid ""
+#~ "If the interface is attached to an existing network it will be "
+#~ "<em>bridged</em> to the existing interfaces and is covered by the "
+#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
+#~ "define a new standalone network for this interface."
+#~ msgstr ""
+#~ "如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙"
+#~ "区域覆盖。取消附加选项可以重定义此接口为新的独立网络。"
+
+#~ msgid "Ignore <code>/etc/hosts</code>"
+#~ msgstr "忽略 <code>/etc/hosts</code>"
+
+#~ msgid "Independent (Ad-Hoc)"
+#~ msgstr "独立(点对点Ad-Hoc)"
+
+#~ msgid "Internet Connection"
+#~ msgstr "网络连接"
+
+#~ msgid "Join (Client)"
+#~ msgstr "加入(客户端)"
+
+#~ msgid "Leases"
+#~ msgstr "租约"
+
+#~ msgid "localises the hostname depending on its subnet"
+#~ msgstr "根据子网本地化主机名"
+
+#~ msgid "LuCI Components"
+#~ msgstr "LuCI 组件"
+
+#~ msgid ""
+#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
+#~ "changes have to be confirmed by clicking Changes - Save & Apply "
+#~ "before being applied."
+#~ msgstr ""
+#~ "注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保"
+#~ "存&应用 后设置才会生效。"
+
+#~ msgid ""
+#~ "On the following pages you can adjust all important settings of your "
+#~ "router."
+#~ msgstr "本页可以设置路由器的重要参数。"
+
+#~ msgid "Perform Actions"
+#~ msgstr "执行操作"
+
+#~ msgid ""
+#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
+#~ "abbr>-replies"
+#~ msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>应答"
+
+#~ msgid "Prevents client to client communication"
+#~ msgstr "禁止客户端间的通信"
+
+#~ msgid "Provide (Access Point)"
+#~ msgstr "添加(接入点)"
+
+#~ msgid "Search file..."
+#~ msgstr "查找文件..."
+
+#~ msgid "Server"
+#~ msgstr "服务器"
+
+#~ msgid "TX / RX"
+#~ msgstr "发送 / 接收"
+
+#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
+#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
+
+#~ msgid "The following changes have been comitted"
+#~ msgstr "以下更改已提交"
+
+#~ msgid "The following changes have been applied"
+#~ msgstr "以下更改已生效"
+
+#~ msgid ""
+#~ "This is the administration area of <abbr title=\"Lua Configuration "
+#~ "Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
+
+#~ msgid "transmitted / received"
+#~ msgstr "已传输 / 已接收"
+
+#~ msgid ""
+#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
+#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
+#~ "installation."
+#~ msgstr ""
+#~ "当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件"
+#~ "时，这些文件将被加入到新的固件中。"
+
+#~ msgid ""
+#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
+#~ "network members can automatically receive their network settings (<abbr "
+#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
+#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
+#~ msgstr ""
+#~ "用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+#~ "abbr>自动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网"
+#~ "掩码，<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信"
+#~ "息。"
+
+#~ msgid "Wireless Scan"
+#~ msgstr "搜索无线"
+
+#~ msgid ""
+#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
+#~ "In order to complete the process, you need to provide some additional "
+#~ "details."
+#~ msgstr ""
+#~ "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
+
+#~ msgid ""
+#~ "You can run several wifi networks with one device. Be aware that there "
+#~ "are certain hardware and driverspecific restrictions. Normally you can "
+#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
+#~ "simultaneously."
+#~ msgstr ""
+#~ "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常"
+#~ "可以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线"
+#~ "网络。"
+
+#~ msgid ""
+#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
+#~ "support"
+#~ msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
+
+#~ msgid ""
+#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
+#~ msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
+
+#~ msgid ""
+#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
+#~ "to use WPA!"
+#~ msgstr ""
+#~ "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
+
+#~ msgid "User Interface"
+#~ msgstr "用户界面"
+
+#~ msgid "(hidden)"
+#~ msgstr "(隐藏)"
+
+#~ msgid "(optional)"
+#~ msgstr "(任意)"
+
+#~ msgid "Aliases"
+#~ msgstr "别名"
+
+#~ msgid "First leased address"
+#~ msgstr "起始分配地址"
+
+#~ msgid "Local Network"
+#~ msgstr "本地网络"
+
+#~ msgid "Number of leased addresses"
+#~ msgstr "地址租用数"
+
+#~ msgid "Path"
+#~ msgstr "路径"
+
+#~ msgid "Resolvfile"
+#~ msgstr "解析文件"
+
+#~ msgid "Zone"
+#~ msgstr "区域"
+
+#~ msgid "additional hostfile"
+#~ msgstr "附加的主机文件"
+
+#~ msgid "automatic"
+#~ msgstr "自动"
+
+#~ msgid "automatically reconnect"
+#~ msgstr "自动重连"
+
+#~ msgid "concurrent queries"
+#~ msgstr "并发查询"
+
+#~ msgid "disconnect when idle for"
+#~ msgstr "空闲自动断开"
+
+#~ msgid "don't cache unknown"
+#~ msgstr "不缓存未知数据"
+
+#~ msgid "installed"
+#~ msgstr "已安装"
+
+#~ msgid "manual"
+#~ msgstr "手册"
+
+#~ msgid "not installed"
+#~ msgstr "未安装"
+
+#~ msgid "query port"
+#~ msgstr "查询端口"
+
+#~ msgid "all"
+#~ msgstr "全部"
+
+#~ msgid "Code"
+#~ msgstr "代码"
+
+#~ msgid "Distance"
+#~ msgstr "距离"
+
+#~ msgid "Legend"
+#~ msgstr "图例"
+
+#~ msgid "Library"
+#~ msgstr "Library"
+
+#~ msgid "see '%s' manpage"
+#~ msgstr "详参 '%s' 联机帮助"
+
+#~ msgid "Package Manager"
+#~ msgstr "软件包管理"
-msgid "Statistics"
-msgstr "ç»\9f计"
+#~ msgid "Service"
+#~ msgstr "æ\9c\8då\8a¡"
+#~ msgid "Statistics"
+#~ msgstr "统计"
projects / project / luci.git / blobdiff